7885db0ce7
Power domain fits much better than a voltage regulator in regards to a proper hardware description and from a software perspective as well. Hence replace the core regulator with the power domain. Note that this doesn't affect any existing DTBs because we haven't started to use the regulator yet, and thus, it's okay to change it. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210330230445.26619-3-digetx@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
356 lines
13 KiB
YAML
356 lines
13 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra30-emc.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: NVIDIA Tegra30 SoC External Memory Controller
|
|
|
|
maintainers:
|
|
- Dmitry Osipenko <digetx@gmail.com>
|
|
- Jon Hunter <jonathanh@nvidia.com>
|
|
- Thierry Reding <thierry.reding@gmail.com>
|
|
|
|
description: |
|
|
The EMC interfaces with the off-chip SDRAM to service the request stream
|
|
sent from Memory Controller. The EMC also has various performance-affecting
|
|
settings beyond the obvious SDRAM configuration parameters and initialization
|
|
settings. Tegra30 EMC supports multiple JEDEC standard protocols: LPDDR2,
|
|
LPDDR3, and DDR3.
|
|
|
|
properties:
|
|
compatible:
|
|
const: nvidia,tegra30-emc
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
"#interconnect-cells":
|
|
const: 0
|
|
|
|
nvidia,memory-controller:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description:
|
|
Phandle of the Memory Controller node.
|
|
|
|
power-domains:
|
|
maxItems: 1
|
|
description:
|
|
Phandle of the SoC "core" power domain.
|
|
|
|
operating-points-v2:
|
|
description:
|
|
Should contain freqs and voltages and opp-supported-hw property, which
|
|
is a bitfield indicating SoC speedo ID mask.
|
|
|
|
patternProperties:
|
|
"^emc-timings-[0-9]+$":
|
|
type: object
|
|
properties:
|
|
nvidia,ram-code:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Value of RAM_CODE this timing set is used for.
|
|
|
|
patternProperties:
|
|
"^timing-[0-9]+$":
|
|
type: object
|
|
properties:
|
|
clock-frequency:
|
|
description:
|
|
Memory clock rate in Hz.
|
|
minimum: 1000000
|
|
maximum: 900000000
|
|
|
|
nvidia,emc-auto-cal-interval:
|
|
description:
|
|
Pad calibration interval in microseconds.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 2097151
|
|
|
|
nvidia,emc-mode-1:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Mode Register 1.
|
|
|
|
nvidia,emc-mode-2:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Mode Register 2.
|
|
|
|
nvidia,emc-mode-reset:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Mode Register 0.
|
|
|
|
nvidia,emc-zcal-cnt-long:
|
|
description:
|
|
Number of EMC clocks to wait before issuing any commands after
|
|
sending ZCAL_MRW_CMD.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 1023
|
|
|
|
nvidia,emc-cfg-dyn-self-ref:
|
|
type: boolean
|
|
description:
|
|
Dynamic self-refresh enabled.
|
|
|
|
nvidia,emc-cfg-periodic-qrst:
|
|
type: boolean
|
|
description:
|
|
FBIO "read" FIFO periodic resetting enabled.
|
|
|
|
nvidia,emc-configuration:
|
|
description:
|
|
EMC timing characterization data. These are the registers
|
|
(see section "18.13.2 EMC Registers" in the TRM) whose values
|
|
need to be specified, according to the board documentation.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
items:
|
|
- description: EMC_RC
|
|
- description: EMC_RFC
|
|
- description: EMC_RAS
|
|
- description: EMC_RP
|
|
- description: EMC_R2W
|
|
- description: EMC_W2R
|
|
- description: EMC_R2P
|
|
- description: EMC_W2P
|
|
- description: EMC_RD_RCD
|
|
- description: EMC_WR_RCD
|
|
- description: EMC_RRD
|
|
- description: EMC_REXT
|
|
- description: EMC_WEXT
|
|
- description: EMC_WDV
|
|
- description: EMC_QUSE
|
|
- description: EMC_QRST
|
|
- description: EMC_QSAFE
|
|
- description: EMC_RDV
|
|
- description: EMC_REFRESH
|
|
- description: EMC_BURST_REFRESH_NUM
|
|
- description: EMC_PRE_REFRESH_REQ_CNT
|
|
- description: EMC_PDEX2WR
|
|
- description: EMC_PDEX2RD
|
|
- description: EMC_PCHG2PDEN
|
|
- description: EMC_ACT2PDEN
|
|
- description: EMC_AR2PDEN
|
|
- description: EMC_RW2PDEN
|
|
- description: EMC_TXSR
|
|
- description: EMC_TXSRDLL
|
|
- description: EMC_TCKE
|
|
- description: EMC_TFAW
|
|
- description: EMC_TRPAB
|
|
- description: EMC_TCLKSTABLE
|
|
- description: EMC_TCLKSTOP
|
|
- description: EMC_TREFBW
|
|
- description: EMC_QUSE_EXTRA
|
|
- description: EMC_FBIO_CFG6
|
|
- description: EMC_ODT_WRITE
|
|
- description: EMC_ODT_READ
|
|
- description: EMC_FBIO_CFG5
|
|
- description: EMC_CFG_DIG_DLL
|
|
- description: EMC_CFG_DIG_DLL_PERIOD
|
|
- description: EMC_DLL_XFORM_DQS0
|
|
- description: EMC_DLL_XFORM_DQS1
|
|
- description: EMC_DLL_XFORM_DQS2
|
|
- description: EMC_DLL_XFORM_DQS3
|
|
- description: EMC_DLL_XFORM_DQS4
|
|
- description: EMC_DLL_XFORM_DQS5
|
|
- description: EMC_DLL_XFORM_DQS6
|
|
- description: EMC_DLL_XFORM_DQS7
|
|
- description: EMC_DLL_XFORM_QUSE0
|
|
- description: EMC_DLL_XFORM_QUSE1
|
|
- description: EMC_DLL_XFORM_QUSE2
|
|
- description: EMC_DLL_XFORM_QUSE3
|
|
- description: EMC_DLL_XFORM_QUSE4
|
|
- description: EMC_DLL_XFORM_QUSE5
|
|
- description: EMC_DLL_XFORM_QUSE6
|
|
- description: EMC_DLL_XFORM_QUSE7
|
|
- description: EMC_DLI_TRIM_TXDQS0
|
|
- description: EMC_DLI_TRIM_TXDQS1
|
|
- description: EMC_DLI_TRIM_TXDQS2
|
|
- description: EMC_DLI_TRIM_TXDQS3
|
|
- description: EMC_DLI_TRIM_TXDQS4
|
|
- description: EMC_DLI_TRIM_TXDQS5
|
|
- description: EMC_DLI_TRIM_TXDQS6
|
|
- description: EMC_DLI_TRIM_TXDQS7
|
|
- description: EMC_DLL_XFORM_DQ0
|
|
- description: EMC_DLL_XFORM_DQ1
|
|
- description: EMC_DLL_XFORM_DQ2
|
|
- description: EMC_DLL_XFORM_DQ3
|
|
- description: EMC_XM2CMDPADCTRL
|
|
- description: EMC_XM2DQSPADCTRL2
|
|
- description: EMC_XM2DQPADCTRL2
|
|
- description: EMC_XM2CLKPADCTRL
|
|
- description: EMC_XM2COMPPADCTRL
|
|
- description: EMC_XM2VTTGENPADCTRL
|
|
- description: EMC_XM2VTTGENPADCTRL2
|
|
- description: EMC_XM2QUSEPADCTRL
|
|
- description: EMC_XM2DQSPADCTRL3
|
|
- description: EMC_CTT_TERM_CTRL
|
|
- description: EMC_ZCAL_INTERVAL
|
|
- description: EMC_ZCAL_WAIT_CNT
|
|
- description: EMC_MRS_WAIT_CNT
|
|
- description: EMC_AUTO_CAL_CONFIG
|
|
- description: EMC_CTT
|
|
- description: EMC_CTT_DURATION
|
|
- description: EMC_DYN_SELF_REF_CONTROL
|
|
- description: EMC_FBIO_SPARE
|
|
- description: EMC_CFG_RSV
|
|
|
|
required:
|
|
- clock-frequency
|
|
- nvidia,emc-auto-cal-interval
|
|
- nvidia,emc-mode-1
|
|
- nvidia,emc-mode-2
|
|
- nvidia,emc-mode-reset
|
|
- nvidia,emc-zcal-cnt-long
|
|
- nvidia,emc-configuration
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- nvidia,ram-code
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
- nvidia,memory-controller
|
|
- "#interconnect-cells"
|
|
- operating-points-v2
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
external-memory-controller@7000f400 {
|
|
compatible = "nvidia,tegra30-emc";
|
|
reg = <0x7000f400 0x400>;
|
|
interrupts = <0 78 4>;
|
|
clocks = <&tegra_car 57>;
|
|
|
|
nvidia,memory-controller = <&mc>;
|
|
operating-points-v2 = <&dvfs_opp_table>;
|
|
power-domains = <&domain>;
|
|
|
|
#interconnect-cells = <0>;
|
|
|
|
emc-timings-1 {
|
|
nvidia,ram-code = <1>;
|
|
|
|
timing-667000000 {
|
|
clock-frequency = <667000000>;
|
|
|
|
nvidia,emc-auto-cal-interval = <0x001fffff>;
|
|
nvidia,emc-mode-1 = <0x80100002>;
|
|
nvidia,emc-mode-2 = <0x80200018>;
|
|
nvidia,emc-mode-reset = <0x80000b71>;
|
|
nvidia,emc-zcal-cnt-long = <0x00000040>;
|
|
nvidia,emc-cfg-periodic-qrst;
|
|
|
|
nvidia,emc-configuration = <
|
|
0x00000020 /* EMC_RC */
|
|
0x0000006a /* EMC_RFC */
|
|
0x00000017 /* EMC_RAS */
|
|
0x00000007 /* EMC_RP */
|
|
0x00000005 /* EMC_R2W */
|
|
0x0000000c /* EMC_W2R */
|
|
0x00000003 /* EMC_R2P */
|
|
0x00000011 /* EMC_W2P */
|
|
0x00000007 /* EMC_RD_RCD */
|
|
0x00000007 /* EMC_WR_RCD */
|
|
0x00000002 /* EMC_RRD */
|
|
0x00000001 /* EMC_REXT */
|
|
0x00000000 /* EMC_WEXT */
|
|
0x00000007 /* EMC_WDV */
|
|
0x0000000a /* EMC_QUSE */
|
|
0x00000009 /* EMC_QRST */
|
|
0x0000000b /* EMC_QSAFE */
|
|
0x00000011 /* EMC_RDV */
|
|
0x00001412 /* EMC_REFRESH */
|
|
0x00000000 /* EMC_BURST_REFRESH_NUM */
|
|
0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
|
|
0x00000002 /* EMC_PDEX2WR */
|
|
0x0000000e /* EMC_PDEX2RD */
|
|
0x00000001 /* EMC_PCHG2PDEN */
|
|
0x00000000 /* EMC_ACT2PDEN */
|
|
0x0000000c /* EMC_AR2PDEN */
|
|
0x00000016 /* EMC_RW2PDEN */
|
|
0x00000072 /* EMC_TXSR */
|
|
0x00000200 /* EMC_TXSRDLL */
|
|
0x00000005 /* EMC_TCKE */
|
|
0x00000015 /* EMC_TFAW */
|
|
0x00000000 /* EMC_TRPAB */
|
|
0x00000006 /* EMC_TCLKSTABLE */
|
|
0x00000007 /* EMC_TCLKSTOP */
|
|
0x00001453 /* EMC_TREFBW */
|
|
0x0000000b /* EMC_QUSE_EXTRA */
|
|
0x00000006 /* EMC_FBIO_CFG6 */
|
|
0x00000000 /* EMC_ODT_WRITE */
|
|
0x00000000 /* EMC_ODT_READ */
|
|
0x00005088 /* EMC_FBIO_CFG5 */
|
|
0xf00b0191 /* EMC_CFG_DIG_DLL */
|
|
0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
|
|
0x00000008 /* EMC_DLL_XFORM_DQS0 */
|
|
0x00000008 /* EMC_DLL_XFORM_DQS1 */
|
|
0x00000008 /* EMC_DLL_XFORM_DQS2 */
|
|
0x00000008 /* EMC_DLL_XFORM_DQS3 */
|
|
0x0000000a /* EMC_DLL_XFORM_DQS4 */
|
|
0x0000000a /* EMC_DLL_XFORM_DQS5 */
|
|
0x0000000a /* EMC_DLL_XFORM_DQS6 */
|
|
0x0000000a /* EMC_DLL_XFORM_DQS7 */
|
|
0x00018000 /* EMC_DLL_XFORM_QUSE0 */
|
|
0x00018000 /* EMC_DLL_XFORM_QUSE1 */
|
|
0x00018000 /* EMC_DLL_XFORM_QUSE2 */
|
|
0x00018000 /* EMC_DLL_XFORM_QUSE3 */
|
|
0x00000000 /* EMC_DLL_XFORM_QUSE4 */
|
|
0x00000000 /* EMC_DLL_XFORM_QUSE5 */
|
|
0x00000000 /* EMC_DLL_XFORM_QUSE6 */
|
|
0x00000000 /* EMC_DLL_XFORM_QUSE7 */
|
|
0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
|
|
0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
|
|
0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
|
|
0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
|
|
0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
|
|
0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
|
|
0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
|
|
0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
|
|
0x0000000a /* EMC_DLL_XFORM_DQ0 */
|
|
0x0000000a /* EMC_DLL_XFORM_DQ1 */
|
|
0x0000000a /* EMC_DLL_XFORM_DQ2 */
|
|
0x0000000a /* EMC_DLL_XFORM_DQ3 */
|
|
0x000002a0 /* EMC_XM2CMDPADCTRL */
|
|
0x0800013d /* EMC_XM2DQSPADCTRL2 */
|
|
0x22220000 /* EMC_XM2DQPADCTRL2 */
|
|
0x77fff884 /* EMC_XM2CLKPADCTRL */
|
|
0x01f1f501 /* EMC_XM2COMPPADCTRL */
|
|
0x07077404 /* EMC_XM2VTTGENPADCTRL */
|
|
0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
|
|
0x080001e8 /* EMC_XM2QUSEPADCTRL */
|
|
0x0c000021 /* EMC_XM2DQSPADCTRL3 */
|
|
0x00000802 /* EMC_CTT_TERM_CTRL */
|
|
0x00020000 /* EMC_ZCAL_INTERVAL */
|
|
0x00000100 /* EMC_ZCAL_WAIT_CNT */
|
|
0x0155000c /* EMC_MRS_WAIT_CNT */
|
|
0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
|
|
0x00000000 /* EMC_CTT */
|
|
0x00000000 /* EMC_CTT_DURATION */
|
|
0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
|
|
0xe8000000 /* EMC_FBIO_SPARE */
|
|
0xff00ff49 /* EMC_CFG_RSV */
|
|
>;
|
|
};
|
|
};
|
|
};
|