afa2b78f1e
Device tree binding for AMS/TAOS tsl2591 ambient light sensor. This driver supports configuration via device tree and sysfs. Supported channels for raw infrared light intensity, raw combined light intensity and illuminance in lux. The driver additionally supports iio events on lower and upper thresholds. This is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal. Signed-off-by: Joe Sandom <joe.g.sandom@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210421221330.17007-2-joe.g.sandom@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
51 lines
1.1 KiB
YAML
51 lines
1.1 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/iio/light/amstaos,tsl2591.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: AMS/TAOS TSL2591 Ambient Light Sensor (ALS)
|
|
|
|
maintainers:
|
|
- Joe Sandom <joe.g.sandom@gmail.com>
|
|
|
|
description: |
|
|
AMS/TAOS TSL2591 is a very-high sensitivity
|
|
light-to-digital converter that transforms light intensity into a digital
|
|
signal.
|
|
|
|
properties:
|
|
compatible:
|
|
const: amstaos,tsl2591
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
description:
|
|
Interrupt (INT:Pin 2) Active low. Should be set to IRQ_TYPE_EDGE_FALLING.
|
|
interrupt is used to detect if the light intensity has fallen below
|
|
or reached above the configured threshold values.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
tsl2591@29 {
|
|
compatible = "amstaos,tsl2591";
|
|
reg = <0x29>;
|
|
interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
};
|
|
...
|