Commit Graph

756 Commits

Author SHA1 Message Date
Paul Mundt
fcfdd0f14f sh: Split out checksum.h in to _32 and _64 variants.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:45 +09:00
Paul Mundt
079060c6ff sh: Fix up 64kB page size selection on SH-5.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:45 +09:00
Paul Mundt
83ce3ac1d1 sh: Split out extable.c _32 and _64 variants.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:44 +09:00
Paul Mundt
8a7bcf0dd0 sh: Add SH-5 support to the consistent DMA impl.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:44 +09:00
Paul Mundt
b613881ead sh: flush_cache_sigtramp() takes 1 arg only.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:44 +09:00
Paul Mundt
959f7d587e sh: Move over the SH-5 head.S and tlb.h.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:44 +09:00
Paul Mundt
256b22ca66 sh: Have SH-5 provide an {en,dis}able_fpu() impl.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:44 +09:00
Paul Mundt
27a511c6f3 sh: Disable initial cache flush on SH-5.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:43 +09:00
Paul Mundt
c881cbc033 sh: Don't reference UBC code in CPU init on sh64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:43 +09:00
Paul Mundt
cc8eae7f51 sh: imask IRQ depends on sh32.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:43 +09:00
Paul Mundt
2f75fbf16b sh: Move in the SH-5 traps.c impl.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:43 +09:00
Paul Mundt
c3c307c83c sh: Move arch/sh64/kernel/sys_sh64.c to arch/sh/kernel/
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:43 +09:00
Paul Mundt
f7a7b15344 sh: Move in the SH-5 signal trampoline impl.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:43 +09:00
Paul Mundt
48b22cf993 sh: Move in the SH-5 ptrace impl.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:42 +09:00
Paul Mundt
36bcd39dbc sh: Split out 29-bit and 32-bit physical mode definitions.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:42 +09:00
Paul Mundt
af3c7dfe82 sh: Split out processor.h in to _32 and _64 variants.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:42 +09:00
Paul Mundt
fe51bc9eaf sh: Split out arch/sh/kernel/process.c for _32 and _64 variants.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:42 +09:00
Paul Mundt
5055235554 sh: Have 32-bit use arch/sh/kernel/Makefile_32.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:41 +09:00
Paul Mundt
9085fa1255 sh: Kill off lib64 version of io.c.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:41 +09:00
Paul Mundt
62d6b66edc sh: Move sh32 optimized I/O routines to arch/sh/lib/
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:41 +09:00
Paul Mundt
4690bdc7c6 sh: Consolidate CPU features in Kconfig.cpu.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:41 +09:00
Paul Mundt
f493473a90 sh: Move sh64 board defconfigs to arch/sh/configs.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:40 +09:00
Paul Mundt
db092ee650 sh: Move sh64 boards to arch/sh/.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:40 +09:00
Paul Mundt
a09063da33 sh: Switch Kconfig.sh64 to use arch/sh/mm/Kconfig.
Consolidates the HUGETLB definitions and others.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:39 +09:00
Paul Mundt
c20c20047b sh: Plug SH-5 in to arch/sh/Makefile.
Adds the ISA tuning and a lib64 rule.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:39 +09:00
Paul Mundt
dd730b8ff8 sh: Move arch/sh64/lib to arch/sh/lib64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:39 +09:00
Paul Mundt
2c6deb5ea4 sh: Move the sh64 Kconfig to arch/sh/Kconfig.sh64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:38 +09:00
Paul Mundt
39d28a2dbe sh: Add a SUPERH32 config symbol.
We need to differentiate from SUPERH64, so add a SUPERH32 for
regular sh.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:38 +09:00
Paul Mundt
b5f42db0a7 sh: Move CPU subtypes to Kconfig.sh.
We intend to share the mm options, so move the SH-only subtypes
up a level.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:38 +09:00
Paul Mundt
c2254f5a74 sh: Rename Kconfig to Kconfig.sh.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:38 +09:00
Kay Sievers
af5ca3f4ec Driver core: change sysdev classes to use dynamic kobject names
All kobjects require a dynamically allocated name now. We no longer
need to keep track if the name is statically assigned, we can just
unconditionally free() all kobject names on cleanup.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Greg Kroah-Hartman
38a382ae5d Kobject: convert arch/* from kobject_unregister() to kobject_put()
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:39 -08:00
Greg Kroah-Hartman
d48b335256 Kobject: change arch/sh/kernel/cpu/sh4/sq.c to use kobject_init_and_add
Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:29 -08:00
Nobuhiro Iwamatsu
b0d98dc504 sh: Support PCI IO access of SH7780 base boards.
The IO access of PCI is not supported in R7780RP and the MS7780SE
board now. The support of the IO access mode of e100 and a lot of IDE
chips becomes possible by fixing the code.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-30 12:36:13 +09:00
Nobuhiro Iwamatsu
78ffeec462 sh: Fix PCI IO space base address of SH7780.
PCI IO space base address of SH7780 was wrong.
Change from 0xFE400000 to 0xFE200000.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-30 12:35:24 +09:00
Magnus Damm
9a876d60a1 sh: include ax88796 in the defconfig for r7785rp
This patch adds the ax88796 device driver to the r7785rp defconfig.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-23 14:39:55 +09:00
Magnus Damm
9b145b1be4 sh: include ax88796 in the defconfig for r7780mp
This patch adds the ax88796 device driver to the r7780mp defconfig.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-23 14:39:39 +09:00
Magnus Damm
abac3f784f sh: fix R2D-1 CF support
This patch fixes CF support for R2D-1 boards. Both R2D-1 and
R2D-PLUS are equipped with CF IRQs, but the R2D-1 FPGA version
seem to deliver IRQ spikes with certain CF cards during libata
probing.  This patch enables polling for R2D-1 as a workaround
for this broken FGPA logic.

R2D-1 CF support was recently introduced by commit:
43f4b8c757.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-23 14:39:13 +09:00
Paul Mundt
0f1a394ba6 sh: lockless UTLB miss fast-path.
With the refactored update_mmu_cache() introduced in older kernels,
there's no longer any need to take the page_table_lock in this path,
so simply drop it completely.

Without this, performance degradation is seen on SMP on heavily
threaded workloads that don't use the split ptlock, and ultimately
we have no reason to contend for the lock in the first place.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-19 13:05:18 +09:00
Paul Mundt
1c6b2ca5e0 sh: Kill off UTLB flush in fast-path.
The __do_page_fault() fast-path contains a UTLB flush in order to
force an ITLB reload, this isn't needed in practice as the ITLB is
auto-reloaded from the UTLB anyways, which is already displaced by
the manual 'ldtlb' in the update_mmu_cache() path.

This provides a measurable speed up in the TLB miss fast-path.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-19 13:00:32 +09:00
Paul Mundt
541c547731 Merge branch 'page_colouring_despair' 2007-11-08 17:01:42 +09:00
Paul Mundt
6d1c76d4e7 sh: Kill off broken snapgear ds1302 code.
This will force the snapgear boards to use the on-chip SH RTC instead,
until the rtc-ds1302 driver is merged. The current code is broken
and hasn't built in some time, so just kill it off and get the board
working again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-08 11:24:33 +09:00
Nobuhiro Iwamatsu
9c88b6ba1c sh: Fix heartbeart on Solution Engine series
Access size to LED is not added on Solution Engine series.
LED doesn't work. Fixed this problem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 14:56:46 +09:00
Paul Mundt
c7a0e13d0a sh: hs7751rvoip: Kill off dead IPR IRQ mappings.
This is dead code, and doesn't build anyways. Kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:39:35 +09:00
Paul Mundt
b7b2387004 sh: hs7751rvoip: irq.c needs linux/interrupt.h.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:38:37 +09:00
Paul Mundt
af39c16bd8 sh: Kill off __{copy,clear}_user_page().
Now that copy_to_user_page()/copy_from_user_page() are wired up, we
can drop the old __copy_xxx() implementations. Now that the page
colouring scheme has changed via kmap_coherent(), we can avoid the
flush in these specific helpers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:14:12 +09:00
Paul Mundt
ba1789efea sh: Optimized copy_{to,from}_user_page() for SH-4.
This moves copy_{to,from}_user_page() out-of-line on SH-4 and
converts for the kmap_coherent() API. Based on the MIPS
implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:14:12 +09:00
Paul Mundt
7747b9a493 sh: Wire up clear_user_highpage().
With the kmap_coherent() API in place, this is trivial to implement,
and lets us avoid the cache flush in certain cases.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:14:12 +09:00
Paul Mundt
f966918724 sh: Kill off the remaining ST40 cruft.
The ST40 stuff in-tree hasn't built for some time, and hasn't been
updated for over 3 years. ST maintains their own out-of-tree changes
and rebases occasionally, and that's ultimately where all of the ST40
users go anyways.

In order for the ST40 code to be brought up to date most of the stuff
removed in this changeset would have to be rewritten anyways, so there's
very little benefit in keeping the remnants around either.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Paul Mundt
0acc729ea3 sh: kgdb sysrq depends on magic sysrq.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00