Commit Graph

957 Commits

Author SHA1 Message Date
Linus Torvalds
2b1caf6ed7 Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  smp: Allow on_each_cpu() to be called while early_boot_irqs_disabled status to init/main.c
  lockdep: Move early boot local IRQ enable/disable status to init/main.c
2011-01-20 18:30:37 -08:00
David Rientjes
6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Tejun Heo
2ce802f62b lockdep: Move early boot local IRQ enable/disable status to init/main.c
During early boot, local IRQ is disabled until IRQ subsystem is
properly initialized.  During this time, no one should enable
local IRQ and some operations which usually are not allowed with
IRQ disabled, e.g. operations which might sleep or require
communications with other processors, are allowed.

lockdep tracked this with early_boot_irqs_off/on() callbacks.
As other subsystems need this information too, move it to
init/main.c and make it generally available.  While at it,
toggle the boolean to early_boot_irqs_disabled instead of
enabled so that it can be initialized with %false and %true
indicates the exceptional condition.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110120110635.GB6036@htj.dyndns.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-20 13:32:33 +01:00
Michael Witten
c5e0591ae3 Kconfig: BLK_THROTTLE -> BLK_DEV_THROTTLING
It would seem that `CONFIG_BLK_THROTTLE' doesn't exist,
as it is only referenced in the documentation for
`CONFIG_BLK_CGROUP'. The only other choice is
`CONFIG_BLK_DEV_THROTTLING':

  $ git grep --cached THROTTL -- \*Kconfig
  block/Kconfig:config BLK_DEV_THROTTLING
  init/Kconfig:   CONFIG_BLK_THROTTLE=y.

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-17 11:15:04 +01:00
Michael Witten
79e2e7597d Kconfig: Typo: seti -> set
Also, I introduced some punctuation to facilitate reading.

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-17 11:13:55 +01:00
Linus Torvalds
f9ee7f60d6 Merge branches 'core-fixes-for-linus', 'x86-fixes-for-linus', 'timers-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: avoid pointless blocked-task warnings
  rcu: demote SRCU_SYNCHRONIZE_DELAY from kernel-parameter status
  rtmutex: Fix comment about why new_owner can be NULL in wake_futex_pi()

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, olpc: Add missing Kconfig dependencies
  x86, mrst: Set correct APB timer IRQ affinity for secondary cpu
  x86: tsc: Fix calibration refinement conditionals to avoid divide by zero
  x86, ia64, acpi: Clean up x86-ism in drivers/acpi/numa.c

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timekeeping: Make local variables static
  time: Rename misnamed minsec argument of clocks_calc_mult_shift()

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Remove syscall_exit_fields
  tracing: Only process module tracepoints once
  perf record: Add "nodelay" mode, disabled by default
  perf sched: Fix list of events, dropping unsupported ':r' modifier
  Revert "perf tools: Emit clearer message for sys_perf_event_open ENOENT return"
  perf top: Fix annotate segv
  perf evsel: Fix order of event list deletion
2011-01-15 12:45:00 -08:00
Ingo Molnar
1161ec9449 Merge branch 'rcu/next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu into core/urgent 2011-01-14 15:30:16 +01:00
Paul E. McKenney
c072a388d5 rcu: demote SRCU_SYNCHRONIZE_DELAY from kernel-parameter status
Because the adaptive synchronize_srcu_expedited() approach has
worked very well in testing, remove the kernel parameter and
replace it by a C-preprocessor macro.  If someone finds problems
with this approach, a more complex and aggressively adaptive
approach might be required.

Longer term, SRCU will be merged with the other RCU implementations,
at which point synchronize_srcu_expedited() will be event driven,
just as synchronize_sched_expedited() currently is.  At that point,
there will be no need for this adaptive approach.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-01-14 04:56:49 -08:00
Linus Torvalds
008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Lasse Collin
3ebe12439b decompressors: add boot-time XZ support
This implements the API defined in <linux/decompress/generic.h> which is
used for kernel, initramfs, and initrd decompression.  This patch together
with the first patch is enough for XZ-compressed initramfs and initrd;
XZ-compressed kernel will need arch-specific changes.

The buffering requirements described in decompress_unxz.c are stricter
than with gzip, so the relevant changes should be done to the
arch-specific code when adding support for XZ-compressed kernel.
Similarly, the heap size in arch-specific pre-boot code may need to be
increased (30 KiB is enough).

The XZ decompressor needs memmove(), memeq() (memcmp() == 0), and
memzero() (memset(ptr, 0, size)), which aren't available in all
arch-specific pre-boot environments.  I'm including simple versions in
decompress_unxz.c, but a cleaner solution would naturally be nicer.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:25 -08:00
Linus Torvalds
23d69b09b7 Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits)
  usb: don't use flush_scheduled_work()
  speedtch: don't abuse struct delayed_work
  media/video: don't use flush_scheduled_work()
  media/video: explicitly flush request_module work
  ioc4: use static work_struct for ioc4_load_modules()
  init: don't call flush_scheduled_work() from do_initcalls()
  s390: don't use flush_scheduled_work()
  rtc: don't use flush_scheduled_work()
  mmc: update workqueue usages
  mfd: update workqueue usages
  dvb: don't use flush_scheduled_work()
  leds-wm8350: don't use flush_scheduled_work()
  mISDN: don't use flush_scheduled_work()
  macintosh/ams: don't use flush_scheduled_work()
  vmwgfx: don't use flush_scheduled_work()
  tpm: don't use flush_scheduled_work()
  sonypi: don't use flush_scheduled_work()
  hvsi: don't use flush_scheduled_work()
  xen: don't use flush_scheduled_work()
  gdrom: don't use flush_scheduled_work()
  ...

Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c
as per Tejun.
2011-01-07 16:58:04 -08:00
Linus Torvalds
65b2074f84 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
  sched: Change wait_for_completion_*_timeout() to return a signed long
  sched, autogroup: Fix reference leak
  sched, autogroup: Fix potential access to freed memory
  sched: Remove redundant CONFIG_CGROUP_SCHED ifdef
  sched: Fix interactivity bug by charging unaccounted run-time on entity re-weight
  sched: Move periodic share updates to entity_tick()
  printk: Use this_cpu_{read|write} api on printk_pending
  sched: Make pushable_tasks CONFIG_SMP dependant
  sched: Add 'autogroup' scheduling feature: automated per session task groups
  sched: Fix unregister_fair_sched_group()
  sched: Remove unused argument dest_cpu to migrate_task()
  mutexes, sched: Introduce arch_mutex_cpu_relax()
  sched: Add some clock info to sched_debug
  cpu: Remove incorrect BUG_ON
  cpu: Remove unused variable
  sched: Fix UP build breakage
  sched: Make task dump print all 15 chars of proc comm
  sched: Update tg->shares after cpu.shares write
  sched: Allow update_cfs_load() to update global load
  sched: Implement demand based update_cfs_load()
  ...
2011-01-06 10:23:33 -08:00
Linus Torvalds
28d9bfc37c Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (146 commits)
  tools, perf: Documentation for the power events API
  perf: Add calls to suspend trace point
  perf script: Make some lists static
  perf script: Use the default lost event handler
  perf session: Warn about errors when processing pipe events too
  perf tools: Fix perf_event.h header usage
  perf test: Clarify some error reports in the open syscall test
  x86, NMI: Add touch_nmi_watchdog to io_check_error delay
  x86: Avoid calling arch_trigger_all_cpu_backtrace() at the same time
  x86: Only call smp_processor_id in non-preempt cases
  perf timechart: Adjust perf timechart to the new power events
  perf: Clean up power events by introducing new, more generic ones
  perf: Do not export power_frequency, but power_start event
  perf test: Add test for counting open syscalls
  perf evsel: Auto allocate resources needed for some methods
  perf evsel: Use {cpu,thread}_map to shorten list of parameters
  perf tools: Refactor all_tids to hold nr and the map
  perf tools: Refactor cpumap to hold nr and the map
  perf evsel: Introduce per cpu and per thread open helpers
  perf evsel: Steal the counter reading routines from stat
  ...
2011-01-06 10:17:26 -08:00
Linus Torvalds
2af49b6058 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: remove unused __list_for_each_rcu() macro
  rculist: fix borked __list_for_each_rcu() macro
  rcu: reduce __call_rcu()-induced contention on rcu_node structures
  rcu: limit rcu_node leaf-level fanout
  rcu: fine-tune grace-period begin/end checks
  rcu: Keep gpnum and completed fields synchronized
  rcu: Stop chasing QS if another CPU did it for us
  rcu: increase synchronize_sched_expedited() batching
  rcu: Make synchronize_srcu_expedited() fast if running readers
  rcu: fix race condition in synchronize_sched_expedited()
  rcu: update documentation/comments for Lai's adoption patch
  rcu,cleanup: simplify the code when cpu is dying
  rcu,cleanup: move synchronize_sched_expedited() out of sched.c
  rcu: get rid of obsolete "classic" names in TREE_RCU tracing
  rcu: Distinguish between boosting and boosted
  rcu: document TINY_RCU and TINY_PREEMPT_RCU tracing.
  rcu: add tracing for TINY_RCU and TINY_PREEMPT_RCU
  rcu: priority boosting for TINY_PREEMPT_RCU
  rcu: move TINY_RCU from softirq to kthread
  rcu: add priority-inversion testing to rcutorture
2011-01-06 10:06:26 -08:00
Ingo Molnar
aef1b9cef7 Merge commit 'v2.6.37' into perf/core
Merge reason: Add the final .37 tree.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05 14:22:10 +01:00
Ingo Molnar
27066fd484 Merge commit 'v2.6.37' into sched/core
Merge reason: Merge the final .37 tree.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05 14:14:46 +01:00
Jan Beulich
a1cf11d8f6 name_to_dev_t() must not call __init code
The function can't be __init itself (being called from some sysfs
handler), and hence none of the functions it calls can be either.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-03 11:48:11 -08:00
Tejun Heo
ee4569a3a7 init: don't call flush_scheduled_work() from do_initcalls()
The call to flush_scheduled_work() in do_initcalls() is there to make
sure all works queued to system_wq by initcalls finish before the init
sections are dropped.

However, the call doesn't make much sense at this point - there
already are multiple different workqueues and different subsystems are
free to create and use their own.  Ordering requirements are and
should be expressed explicitly.

Drop the call to prepare for the deprecation and removal of
flush_scheduled_work().

Andrew suggested adding sanity check where the workqueue code checks
whether any pending or running work has the work function in the init
text section.  However, checking this for running works requires the
worker to keep track of the current function being executed, and
checking only the pending works will miss most cases.  As a violation
will almost always be caught by the usual page fault mechanism, I
don't think it would be worthwhile to make the workqueue code track
extra state just for this.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
2010-12-24 16:14:20 +01:00
Ingo Molnar
394f4528c5 Merge branch 'rcu/next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu into core/rcu 2010-12-23 12:57:04 +01:00
Jim Cromie
43d547f9ce init/Kconfig: fix typo
Signed-off-by:  Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-22 18:58:36 +01:00
Peter Zijlstra
9f58a205c6 init: Initialized IDR earlier
perf_event_init() wants to start using IDR trees, its needs in turn
are satisfied by mm_init().

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222056.206992649@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-16 11:36:43 +01:00
Peter Zijlstra
24a24bb6ff perf: Move perf_event_init() into main.c
Currently we call perf_event_init() from sched_init(). In order to
make it more obvious move it to the cannnonical location.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222056.093629821@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-16 11:36:42 +01:00
Ingo Molnar
8e9255e6a2 Merge branch 'linus' into sched/core
Merge reason: we want to queue up dependent cleanup

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-08 20:15:29 +01:00
Ingo Molnar
10a18d7dc0 Merge commit 'v2.6.37-rc5' into perf/core
Merge reason: Pick up the latest -rc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-07 07:49:51 +01:00
Mike Galbraith
5091faa449 sched: Add 'autogroup' scheduling feature: automated per session task groups
A recurring complaint from CFS users is that parallel kbuild has
a negative impact on desktop interactivity.  This patch
implements an idea from Linus, to automatically create task
groups.  Currently, only per session autogroups are implemented,
but the patch leaves the way open for enhancement.

Implementation: each task's signal struct contains an inherited
pointer to a refcounted autogroup struct containing a task group
pointer, the default for all tasks pointing to the
init_task_group.  When a task calls setsid(), a new task group
is created, the process is moved into the new task group, and a
reference to the preveious task group is dropped.  Child
processes inherit this task group thereafter, and increase it's
refcount.  When the last thread of a process exits, the
process's reference is dropped, such that when the last process
referencing an autogroup exits, the autogroup is destroyed.

At runqueue selection time, IFF a task has no cgroup assignment,
its current autogroup is used.

Autogroup bandwidth is controllable via setting it's nice level
through the proc filesystem:

  cat /proc/<pid>/autogroup

Displays the task's group and the group's nice level.

  echo <nice level> > /proc/<pid>/autogroup

Sets the task group's shares to the weight of nice <level> task.
Setting nice level is rate limited for !admin users due to the
abuse risk of task group locking.

The feature is enabled from boot by default if
CONFIG_SCHED_AUTOGROUP=y is selected, but can be disabled via
the boot option noautogroup, and can also be turned on/off on
the fly via:

  echo [01] > /proc/sys/kernel/sched_autogroup_enabled

... which will automatically move tasks to/from the root task group.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
[ Removed the task_group_path() debug code, and fixed !EVENTFD build failure. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290281700.28711.9.camel@maggy.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-30 16:03:35 +01:00
Paul E. McKenney
46fdb0937f rcu: Make synchronize_srcu_expedited() fast if running readers
The synchronize_srcu_expedited() function is currently quick if there
are no active readers, but will delay a full jiffy if there are any.
If these readers leave their SRCU read-side critical sections quickly,
this is way too long to wait.  So this commit first waits ten microseconds,
and only then falls back to jiffy-at-a-time waiting.

Reported-by: Avi Kivity <avi@redhat.com>
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Tested-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-11-29 22:02:40 -08:00
Paul E. McKenney
9e571a82f0 rcu: add tracing for TINY_RCU and TINY_PREEMPT_RCU
Add tracing for the tiny RCU implementations, including statistics on
boosting in the case of TINY_PREEMPT_RCU and RCU_BOOST.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-11-29 22:01:55 -08:00
Paul E. McKenney
24278d1483 rcu: priority boosting for TINY_PREEMPT_RCU
Add priority boosting, but only for TINY_PREEMPT_RCU.  This is enabled
by the default-off RCU_BOOST kernel parameter.  The priority to which to
boost preempted RCU readers is controlled by the RCU_BOOST_PRIO kernel
parameter (defaulting to real-time priority 1) and the time to wait
before boosting the readers blocking a given grace period is controlled
by the RCU_BOOST_DELAY kernel parameter (defaulting to 500 milliseconds).

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-11-29 22:01:54 -08:00
Peter Zijlstra
004417a6d4 perf, arch: Cleanup perf-pmu init vs lockup-detector
The perf hardware pmu got initialized at various points in the boot,
some before early_initcall() some after (notably arch_initcall).

The problem is that the NMI lockup detector is ran from early_initcall()
and expects the hardware pmu to be present.

Sanitize this by moving all architecture hardware pmu implementations to
initialize at early_initcall() and move the lockup detector to an explicit
initcall right after that.

Cc: paulus <paulus@samba.org>
Cc: davem <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290707759.2145.119.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-26 15:14:56 +01:00
Michal Hocko
a42c390cfa cgroups: make swap accounting default behavior configurable
Swap accounting can be configured by CONFIG_CGROUP_MEM_RES_CTLR_SWAP
configuration option and then it is turned on by default.  There is a boot
option (noswapaccount) which can disable this feature.

This makes it hard for distributors to enable the configuration option as
this feature leads to a bigger memory consumption and this is a no-go for
general purpose distribution kernel.  On the other hand swap accounting
may be very usuful for some workloads.

This patch adds a new configuration option which controls the default
behavior (CGROUP_MEM_RES_CTLR_SWAP_ENABLED).  If the option is selected
then the feature is turned on by default.

It also adds a new boot parameter swapaccount[=1|0] which enhances the
original noswapaccount parameter semantic by means of enable/disable logic
(defaults to 1 if no value is provided to be still consistent with
noswapaccount).

The default behavior is unchanged (if CONFIG_CGROUP_MEM_RES_CTLR_SWAP is
enabled then CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is enabled as well)

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25 06:50:45 +09:00
Arnd Bergmann
451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Linus Torvalds
c9e2a72ff1 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  initramfs: Fix build break on symbol-prefixed archs
  initramfs: fix initramfs size calculation
  initramfs: generalize initramfs_data.xxx.S variants
  scripts/kallsyms: Enable error messages while hush up unnecessary warnings
  scripts/setlocalversion: update comment
  kbuild: Use a single clean rule for kernel and external modules
  kbuild: Do not run make clean in $(srctree)
  scripts/mod/modpost.c: fix commentary accordingly to last changes
  kbuild: Really don't clean bounds.h and asm-offsets.h
2010-10-28 15:13:55 -07:00
Daniel Lezcano
7af37bec41 namespaces Kconfig: move namespace menu location after the cgroup
We have the namespaces as a menuconfig like the cgroup.  The cgroup and
the namespace are two base bricks for the containers.

It is more logical to put the namespace menu right after the cgroup menu.

Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:17 -07:00
Daniel Lezcano
eef691b36e namespaces Kconfig: remove the cgroup device whitelist experimental tag
This subsystem is merged since a long time now, I think we can consider it
mature enough.

Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:17 -07:00
Daniel Lezcano
79ae9c29e4 namespaces Kconfig: remove pointless cgroup dependency
The different cgroup subsystems are under the cgroup submenu.  The
dependency between the cgroups and the menu subsystems is pointless.

Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:16 -07:00
Daniel Lezcano
8dd2a82c29 namespaces Kconfig: make namespace a submenu
Make the namespaces config option a submenu.

Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:16 -07:00
Daniel Lezcano
17a6d4411a namespaces: default all the namespaces to 'yes' when CONFIG_NAMESPACES is selected
As the different namespaces depend on 'CONFIG_NAMESPACES', it is logical
to enable all the namespaces when we enable NAMESPACES.

Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: David Miller <davem@davemloft.net>
Acked-By: Matt Helsley <matthltc@us.ibm.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:16 -07:00
Daniel Lezcano
9bd38c2cda namespaces: remove pid_ns and net_ns experimental status
The pid namespace is in the kernel since 2.6.27 and the net_ns since
2.6.29.  They are enabled in the distro by default and used by userspace
component.  They are mature enough to remove the 'experimental' label.

Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:16 -07:00
Namhyung Kim
562f5e638d init: mark __user address space on string literals
When calling syscall service routines in kernel, some of arguments should
be user pointers but were missing __user markup on string literals.  Add
it.  Removes some sparse warnings.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:15 -07:00
Linus Torvalds
74eb94b218 Merge branch 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (67 commits)
  SUNRPC: Cleanup duplicate assignment in rpcauth_refreshcred
  nfs: fix unchecked value
  Ask for time_delta during fsinfo probe
  Revalidate caches on lock
  SUNRPC: After calling xprt_release(), we must restart from call_reserve
  NFSv4: Fix up the 'dircount' hint in encode_readdir
  NFSv4: Clean up nfs4_decode_dirent
  NFSv4: nfs4_decode_dirent must clear entry->fattr->valid
  NFSv4: Fix a regression in decode_getfattr
  NFSv4: Fix up decode_attr_filehandle() to handle the case of empty fh pointer
  NFS: Ensure we check all allocation return values in new readdir code
  NFS: Readdir plus in v4
  NFS: introduce generic decode_getattr function
  NFS: check xdr_decode for errors
  NFS: nfs_readdir_filler catch all errors
  NFS: readdir with vmapped pages
  NFS: remove page size checking code
  NFS: decode_dirent should use an xdr_stream
  SUNRPC: Add a helper function xdr_inline_peek
  NFS: remove readdir plus limit
  ...
2010-10-25 13:48:29 -07:00
Linus Torvalds
229aebb873 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  Update broken web addresses in arch directory.
  Update broken web addresses in the kernel.
  Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
  Revert "Fix typo: configuation => configuration" partially
  ida: document IDA_BITMAP_LONGS calculation
  ext2: fix a typo on comment in ext2/inode.c
  drivers/scsi: Remove unnecessary casts of private_data
  drivers/s390: Remove unnecessary casts of private_data
  net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
  drivers/infiniband: Remove unnecessary casts of private_data
  drivers/gpu/drm: Remove unnecessary casts of private_data
  kernel/pm_qos_params.c: Remove unnecessary casts of private_data
  fs/ecryptfs: Remove unnecessary casts of private_data
  fs/seq_file.c: Remove unnecessary casts of private_data
  arm: uengine.c: remove C99 comments
  arm: scoop.c: remove C99 comments
  Fix typo configue => configure in comments
  Fix typo: configuation => configuration
  Fix typo interrest[ing|ed] => interest[ing|ed]
  Fix various typos of valid in comments
  ...

Fix up trivial conflicts in:
	drivers/char/ipmi/ipmi_si_intf.c
	drivers/usb/gadget/rndis.c
	net/irda/irnet/irnet_ppp.c
2010-10-24 13:41:39 -07:00
Linus Torvalds
b9da057105 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (31 commits)
  driver core: Display error codes when class suspend fails
  Driver core: Add section count to memory_block struct
  Driver core: Add mutex for adding/removing memory blocks
  Driver core: Move find_memory_block routine
  hpilo: Despecificate driver from iLO generation
  driver core: Convert link_mem_sections to use find_memory_block_hinted.
  driver core: Introduce find_memory_block_hinted which utilizes kset_find_obj_hinted.
  kobject: Introduce kset_find_obj_hinted.
  driver core: fix build for CONFIG_BLOCK not enabled
  driver-core: base: change to new flag variable
  sysfs: only access bin file vm_ops with the active lock
  sysfs: Fail bin file mmap if vma close is implemented.
  FW_LOADER: fix kconfig dependency warning on HOTPLUG
  uio: Statically allocate uio_class and use class .dev_attrs.
  uio: Support 2^MINOR_BITS minors
  uio: Cleanup irq handling.
  uio: Don't clear driver data
  uio: Fix lack of locking in init_uio_class
  SYSFS: Allow boot time switching between deprecated and modern sysfs layout
  driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices
  ...
2010-10-22 19:36:42 -07:00
Linus Torvalds
e9dd2b6837 Merge branch 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block: (39 commits)
  cfq-iosched: Fix a gcc 4.5 warning and put some comments
  block: Turn bvec_k{un,}map_irq() into static inline functions
  block: fix accounting bug on cross partition merges
  block: Make the integrity mapped property a bio flag
  block: Fix double free in blk_integrity_unregister
  block: Ensure physical block size is unsigned int
  blkio-throttle: Fix possible multiplication overflow in iops calculations
  blkio-throttle: limit max iops value to UINT_MAX
  blkio-throttle: There is no need to convert jiffies to milli seconds
  blkio-throttle: Fix link failure failure on i386
  blkio: Recalculate the throttled bio dispatch time upon throttle limit change
  blkio: Add root group to td->tg_list
  blkio: deletion of a cgroup was causes oops
  blkio: Do not export throttle files if CONFIG_BLK_DEV_THROTTLING=n
  block: set the bounce_pfn to the actual DMA limit rather than to max memory
  block: revert bad fix for memory hotplug causing bounces
  Fix compile error in blk-exec.c for !CONFIG_DETECT_HUNG_TASK
  block: set the bounce_pfn to the actual DMA limit rather than to max memory
  block: Prevent hang_check firing during long I/O
  cfq: improve fsync performance for small files
  ...

Fix up trivial conflicts due to __rcu sparse annotation in include/linux/genhd.h
2010-10-22 17:00:32 -07:00
Linus Torvalds
5704e44d28 Merge branch 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  BKL: introduce CONFIG_BKL.
  dabusb: remove the BKL
  sunrpc: remove the big kernel lock
  init/main.c: remove BKL notations
  blktrace: remove the big kernel lock
  rtmutex-tester: make it build without BKL
  dvb-core: kill the big kernel lock
  dvb/bt8xx: kill the big kernel lock
  tlclk: remove big kernel lock
  fix rawctl compat ioctls breakage on amd64 and itanic
  uml: kill big kernel lock
  parisc: remove big kernel lock
  cris: autoconvert trivial BKL users
  alpha: kill big kernel lock
  isapnp: BKL removal
  s390/block: kill the big kernel lock
  hpet: kill BKL, add compat_ioctl
2010-10-22 10:43:11 -07:00
Andi Kleen
e52eec13cd SYSFS: Allow boot time switching between deprecated and modern sysfs layout
I have some systems which need legacy sysfs due to old tools that are
making assumptions that a directory can never be a symlink to another
directory, and it's a big hazzle to compile separate kernels for them.

This patch turns CONFIG_SYSFS_DEPRECATED into a run time option
that can be switched on/off the kernel command line. This way
the same binary can be used in both cases with just a option
on the command line.

The old CONFIG_SYSFS_DEPRECATED_V2 option is still there to set
the default. I kept the weird name to not break existing
config files.

Also the compat code can be still completely disabled by undefining
CONFIG_SYSFS_DEPRECATED_SWITCH -- just the optimizer takes
care of this now instead of lots of ifdefs. This makes the code
look nicer.

v2: This is an updated version on top of Kay's patch to only
handle the block devices. I tested it on my old systems
and that seems to work.

Cc: axboe@kernel.dk
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:16:43 -07:00
Kay Sievers
39aba963d9 driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices
This patch removes the old CONFIG_SYSFS_DEPRECATED_V2 config option,
but it keeps the logic around to handle block devices in the old manner
as some people like to run new kernel versions on old (pre 2007/2008)
distros.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: "James E.J. Bottomley" <James.Bottomley@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:16:43 -07:00
Linus Torvalds
4a60cfa945 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (96 commits)
  apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets
  apic, x86: Check if EILVT APIC registers are available (AMD only)
  x86: ioapic: Call free_irte only if interrupt remapping enabled
  arm: Use ARCH_IRQ_INIT_FLAGS
  genirq, ARM: Fix boot on ARM platforms
  genirq: Fix CONFIG_GENIRQ_NO_DEPRECATED=y build
  x86: Switch sparse_irq allocations to GFP_KERNEL
  genirq: Switch sparse_irq allocator to GFP_KERNEL
  genirq: Make sparse_lock a mutex
  x86: lguest: Use new irq allocator
  genirq: Remove the now unused sparse irq leftovers
  genirq: Sanitize dynamic irq handling
  genirq: Remove arch_init_chip_data()
  x86: xen: Sanitise sparse_irq handling
  x86: Use sane enumeration
  x86: uv: Clean up the direct access to irq_desc
  x86: Make io_apic.c local functions static
  genirq: Remove irq_2_iommu
  x86: Speed up the irq_remapped check in hot pathes
  intr_remap: Simplify the code further
  ...

Fix up trivial conflicts in arch/x86/Kconfig
2010-10-21 14:11:46 -07:00
Linus Torvalds
5d70f79b5e Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (163 commits)
  tracing: Fix compile issue for trace_sched_wakeup.c
  [S390] hardirq: remove pointless header file includes
  [IA64] Move local_softirq_pending() definition
  perf, powerpc: Fix power_pmu_event_init to not use event->ctx
  ftrace: Remove recursion between recordmcount and scripts/mod/empty
  jump_label: Add COND_STMT(), reducer wrappery
  perf: Optimize sw events
  perf: Use jump_labels to optimize the scheduler hooks
  jump_label: Add atomic_t interface
  jump_label: Use more consistent naming
  perf, hw_breakpoint: Fix crash in hw_breakpoint creation
  perf: Find task before event alloc
  perf: Fix task refcount bugs
  perf: Fix group moving
  irq_work: Add generic hardirq context callbacks
  perf_events: Fix transaction recovery in group_sched_in()
  perf_events: Fix bogus AMD64 generic TLB events
  perf_events: Fix bogus context time tracking
  tracing: Remove parent recording in latency tracer graph options
  tracing: Use one prologue for the preempt irqs off tracer function tracers
  ...
2010-10-21 12:54:49 -07:00
Arnd Bergmann
6de5bd128d BKL: introduce CONFIG_BKL.
With all the patches we have queued in the BKL removal tree, only a
few dozen modules are left that actually rely on the BKL, and even
there are lots of low-hanging fruit. We need to decide what to do
about them, this patch illustrates one of the options:

Every user of the BKL is marked as 'depends on BKL' in Kconfig,
and the CONFIG_BKL becomes a user-visible option. If it gets
disabled, no BKL using module can be built any more and the BKL
code itself is compiled out.

The one exception is file locking, which is practically always
enabled and does a 'select BKL' instead. This effectively forces
CONFIG_BKL to be enabled until we have solved the fs/lockd
mess and can apply the patch that removes the BKL from fs/locks.c.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-21 15:44:13 +02:00
Namhyung Kim
1fa4f3b57c init/main.c: remove BKL notations
According to commit 5e3d20a68f
(init: Remove the BKL from startup code) these sparse notations
should be removed also.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-19 11:29:58 +02:00
Peter Zijlstra
e360adbe29 irq_work: Add generic hardirq context callbacks
Provide a mechanism that allows running code in IRQ context. It is
most useful for NMI code that needs to interact with the rest of the
system -- like wakeup a task to drain buffers.

Perf currently has such a mechanism, so extract that and provide it as
a generic feature, independent of perf so that others may also
benefit.

The IRQ context callback is generated through self-IPIs where
possible, or on architectures like powerpc the decrementer (the
built-in timer facility) is set to generate an interrupt immediately.

Architectures that don't have anything like this get to do with a
callback from the timer tick. These architectures can call
irq_work_run() at the tail of any IRQ handlers that might enqueue such
work (like the perf IRQ handler) to avoid undue latencies in
processing the work.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[ various fixes ]
Signed-off-by: Huang Ying <ying.huang@intel.com>
LKML-Reference: <1287036094.7768.291.camel@yhuang-dev>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18 19:58:50 +02:00
Thomas Gleixner
154cd387cd genirq: Remove early_init_irq_lock_class()
early_init_irq_lock_class() is called way before anything touches the
irq descriptors. In case of SPARSE_IRQ=y this is a NOP operation
because the radix tree is empty at this point. For the SPARSE_IRQ=n
case it's sufficient to set the lock class in early_init_irq(). 

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12 16:39:06 +02:00
Thomas Gleixner
d9817ebeee genirq: Provide Kconfig
The generic irq Kconfig options are copied around all archs. Provide a
generic Kconfig file which can be included.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100927121843.217333624@linutronix.de>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04 11:01:05 +02:00
Hendrik Brueckner
ffe8018c34 initramfs: fix initramfs size calculation
The size of a built-in initramfs is calculated in init/initramfs.c by
"__initramfs_end - __initramfs_start".  Those symbols are defined in the
linker script include/asm-generic/vmlinux.lds.h:

#define INIT_RAM_FS                                                     \
        . = ALIGN(PAGE_SIZE);                                           \
        VMLINUX_SYMBOL(__initramfs_start) = .;                          \
        *(.init.ramfs)                                                  \
        VMLINUX_SYMBOL(__initramfs_end) = .;

If the initramfs file has an odd number of bytes, the "__initramfs_end"
symbol points to an odd address, for example, the symbols in the
System.map might look like:

    0000000000572000 T __initramfs_start
    00000000005bcd05 T __initramfs_end	  <-- odd address

At least on s390 this causes a problem:

Certain s390 instructions, especially instructions for loading addresses
(larl) or branch addresses must be on even addresses.  The compiler loads
the symbol addresses with the "larl" instruction.  This instruction sets
the last bit to 0 and, therefore, for odd size files, the calculated size
is one byte less than it should be:

    0000000000540a9c <populate_rootfs>:
      540a9c:     eb cf f0 78 00 24       stmg    %r12,%r15,120(%r15),
      540aa2:     c0 10 00 01 8a af       larl    %r1,572000 <__initramfs_start>
      540aa8:     c0 c0 00 03 e1 2e       larl    %r12,5bcd04 <initramfs_end>
                                                  (Instead of  5bcd05)
      ...
      540abe:     1b c1                   sr      %r12,%r1

To fix the problem, this patch introduces the global variable
__initramfs_size, which is calculated in the "usr/initramfs_data.S" file.
The populate_rootfs() function can then use the start marker of the
.init.ramfs section and the value of __initramfs_size for loading the
initramfs.  Because the start marker and size is sufficient, the
__initramfs_end symbol is no longer needed and is removed.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Michal Marek <mmarek@suse.cz>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-09-29 16:28:59 +02:00
Chuck Lever
56463e50d1 NFS: Use super.c for NFSROOT mount option parsing
Replace duplicate code in NFSROOT for mounting an NFS server on '/'
with logic that uses the existing mainline text-based logic in the NFS
client.

Add documenting comments where appropriate.

Note that this means NFSROOT mounts now use the same default settings
as v2/v3 mounts done via mount(2) from user space.

  vers=3,tcp,rsize=<negotiated default>,wsize=<negotiated default>

As before, however, no version/protocol negotiation with the server is
done.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17 10:54:37 -04:00
Jens Axboe
6d0aed7a38 do_mounts: only enable PARTUUID for CONFIG_BLOCK
When CONFIG_BLOCK is not enabled:

init/do_mounts.c:71: error: implicit declaration of function 'dev_to_part'
init/do_mounts.c:71: warning: initialization makes pointer from integer without a cast
init/do_mounts.c:73: error: dereferencing pointer to incomplete type
init/do_mounts.c:76: error: dereferencing pointer to incomplete type
init/do_mounts.c:76: error: dereferencing pointer to incomplete type
init/do_mounts.c:102: error: implicit declaration of function 'part_pack_uuid'
init/do_mounts.c:104: error: 'block_class' undeclared (first use in this function)

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-17 10:00:46 +02:00
Vivek Goyal
e43473b7f2 blkio: Core implementation of throttle policy
o Actual implementation of throttling policy in block layer. Currently it
  implements READ and WRITE bytes per second throttling logic. IOPS throttling
  comes in later patches.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 08:42:52 +02:00
Jens Axboe
38b6f45a97 core: match_dev_by_uuid() should not be marked __init
It is also called outside the scope of init functions. Stephen
reports:

WARNING: init/mounts.o(.text+0x21a): Section mismatch in reference from the function name_to_dev_t() to the function .init.text:match_dev_by_uuid()
The function name_to_dev_t() references
the function __init match_dev_by_uuid().
This is often because name_to_dev_t lacks a __init
annotation or the annotation of match_dev_by_uuid is wrong.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 08:33:54 +02:00
Will Drewry
b5af921ec0 init: add support for root devices specified by partition UUID
This is the third patch in a series which adds support for
storing partition metadata, optionally, off of the hd_struct.

One major use for that data is being able to resolve partition
by other identities than just the index on a block device.  Device
enumeration varies by platform and there's a benefit to being able
to use something like EFI GPT's GUIDs to determine the correct
block device and partition to mount as the root.

This change adds that support to root= by adding support for
the following syntax:

  root=PARTUUID=hex-uuid

Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-15 16:14:03 +02:00
Stephan Sperber
681b3049dd Kconfig: delete duplicate word
Deleted a word which apeared twice.

Signed-off-by: Stephan Sperber <sperberstephan@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-23 15:35:15 +02:00
Paul E. McKenney
a57eb940d1 rcu: Add a TINY_PREEMPT_RCU
Implement a small-memory-footprint uniprocessor-only implementation of
preemptible RCU.  This implementation uses but a single blocked-tasks
list rather than the combinatorial number used per leaf rcu_node by
TREE_PREEMPT_RCU, which reduces memory consumption and greatly simplifies
processing.  This version also takes advantage of uniprocessor execution
to accelerate grace periods in the case where there are no readers.

The general design is otherwise broadly similar to that of TREE_PREEMPT_RCU.

This implementation is a step towards having RCU implementation driven
off of the SMP and PREEMPT kernel configuration variables, which can
happen once this implementation has accumulated sufficient experience.

Removed ACCESS_ONCE() from __rcu_read_unlock() and added barrier() as
suggested by Steve Rostedt in order to avoid the compiler-reordering
issue noted by Mathieu Desnoyers (http://lkml.org/lkml/2010/8/16/183).

As can be seen below, CONFIG_TINY_PREEMPT_RCU represents almost 5Kbyte
savings compared to CONFIG_TREE_PREEMPT_RCU.  Of course, for non-real-time
workloads, CONFIG_TINY_RCU is even better.

	CONFIG_TREE_PREEMPT_RCU

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	   6170	    825	     28	   7023	   kernel/rcutree.o
				   ----
				   7026    Total

	CONFIG_TINY_PREEMPT_RCU

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	   2081	     81	      8	   2170	   kernel/rcutiny.o
				   ----
				   2183    Total

	CONFIG_TINY_RCU (non-preemptible)

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	    719	     25	      0	    744	   kernel/rcutiny.o
				    ---
				    757    Total

Requested-by: Loïc Minier <loic.minier@canonical.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-08-20 08:55:00 -07:00
Paul E. McKenney
4d87ffadbb rcu: Fix RCU_FANOUT help message
Commit cf244dc01b added a fourth level to the TREE_RCU hierarchy,
but the RCU_FANOUT help message still said "cube root".  This commit
fixes this to "fourth root" and also emphasizes that production
systems are well-served by the default.  (Stress-testing RCU itself
uses small RCU_FANOUT values in order to test large-system code paths
on small(er) systems.)

Located-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-08-19 17:18:04 -07:00
Paul E. McKenney
687d7a960a rcu: restrict TREE_RCU to SMP builds with !PREEMPT
Because both TINY_RCU and TREE_PREEMPT_RCU have been in mainline for
several releases, it is time to restrict the use of TREE_RCU to SMP
non-preemptible systems.  This reduces testing/validation effort.  This
commit is a first step towards driving the selection of RCU implementation
directly off of the SMP and PREEMPT configuration parameters.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-08-19 17:18:04 -07:00
David Howells
d7627467b7 Make do_execve() take a const filename pointer
Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17 18:07:43 -07:00
Linus Torvalds
26df0766a7 Merge branch 'params' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* 'params' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (22 commits)
  param: don't deref arg in __same_type() checks
  param: update drivers/acpi/debug.c to new scheme
  param: use module_param in drivers/message/fusion/mptbase.c
  ide: use module_param_named rather than module_param_call
  param: update drivers/char/ipmi/ipmi_watchdog.c to new scheme
  param: lock if_sdio's lbs_helper_name and lbs_fw_name against sysfs changes.
  param: lock myri10ge_fw_name against sysfs changes.
  param: simple locking for sysfs-writable charp parameters
  param: remove unnecessary writable charp
  param: add kerneldoc to moduleparam.h
  param: locking for kernel parameters
  param: make param sections const.
  param: use free hook for charp (fix leak of charp parameters)
  param: add a free hook to kernel_param_ops.
  param: silence .init.text references from param ops
  Add param ops struct for hvc_iucv driver.
  nfs: update for module_param_named API change
  AppArmor: update for module_param_named API change
  param: use ops in struct kernel_param, rather than get and set fns directly
  param: move the EXPORT_SYMBOL to after the definitions.
  ...
2010-08-12 10:01:59 -07:00
KAMEZAWA Hiroyuki
65e0e81166 memcg: remove experimental from swap account config
It's 11 months since we changed swap_map[] to indicates SWAP_HAS_CACHE.
Since that, memcg's swap accounting has been very stable and it seems
it can be maintained.

So, I'd like to remove EXPERIMENTAL from the config.

Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:18 -07:00
Rusty Russell
914dcaa84c param: make param sections const.
Since this section can be read-only (they're in .rodata), they should
always have been const.  Minor flow-through various functions.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
2010-08-11 23:04:19 +09:30
Linus Torvalds
8c8946f509 Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notify
* 'for-linus' of git://git.infradead.org/users/eparis/notify: (132 commits)
  fanotify: use both marks when possible
  fsnotify: pass both the vfsmount mark and inode mark
  fsnotify: walk the inode and vfsmount lists simultaneously
  fsnotify: rework ignored mark flushing
  fsnotify: remove global fsnotify groups lists
  fsnotify: remove group->mask
  fsnotify: remove the global masks
  fsnotify: cleanup should_send_event
  fanotify: use the mark in handler functions
  audit: use the mark in handler functions
  dnotify: use the mark in handler functions
  inotify: use the mark in handler functions
  fsnotify: send fsnotify_mark to groups in event handling functions
  fsnotify: Exchange list heads instead of moving elements
  fsnotify: srcu to protect read side of inode and vfsmount locks
  fsnotify: use an explicit flag to indicate fsnotify_destroy_mark has been called
  fsnotify: use _rcu functions for mark list traversal
  fsnotify: place marks on object in order of group memory address
  vfs/fsnotify: fsnotify_close can delay the final work in fput
  fsnotify: store struct file not struct path
  ...

Fix up trivial delete/modify conflict in fs/notify/inotify/inotify.c.
2010-08-10 11:39:13 -07:00
Kevin Winchester
e446127134 init/main.c: mark do_one_initcall* as __init_or_module
Andrew Morton suggested that the do_one_initcall and do_one_initcall_debug
functions can be marked __init_or_module such that they can be discarded
for the CONFIG_MODULES=N case.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:06 -07:00
Kevin Winchester
22c5c03b42 init/main.c: fix warning: 'calltime.tv64' may be used uninitialized
Using:

	gcc (GCC) 4.5.0 20100610 (prerelease)

The following warning appears:

	init/main.c: In function `do_one_initcall':
	init/main.c:730:10: warning: `calltime.tv64' may be used uninitialized in this function

This warning is actually correct, as the global initcall_debug could
arguably be changed by the initcall.

Correct this warning by extracting a new function, do_one_initcall_debug,
that performs the initcall for the debug case.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:06 -07:00
Linus Torvalds
78417334b5 Merge branch 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing
* 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
  do_coredump: Do not take BKL
  init: Remove the BKL from startup code
2010-08-07 17:06:54 -07:00
Linus Torvalds
3b7433b8a8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits)
  workqueue: mark init_workqueues() as early_initcall()
  workqueue: explain for_each_*cwq_cpu() iterators
  fscache: fix build on !CONFIG_SYSCTL
  slow-work: kill it
  gfs2: use workqueue instead of slow-work
  drm: use workqueue instead of slow-work
  cifs: use workqueue instead of slow-work
  fscache: drop references to slow-work
  fscache: convert operation to use workqueue instead of slow-work
  fscache: convert object to use workqueue instead of slow-work
  workqueue: fix how cpu number is stored in work->data
  workqueue: fix mayday_mask handling on UP
  workqueue: fix build problem on !CONFIG_SMP
  workqueue: fix locking in retry path of maybe_create_worker()
  async: use workqueue for worker pool
  workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
  workqueue: implement unbound workqueue
  workqueue: prepare for WQ_UNBOUND implementation
  libata: take advantage of cmwq and remove concurrency limitations
  workqueue: fix worker management invocation without pending works
  ...

Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in
include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c
2010-08-07 12:42:58 -07:00
Linus Torvalds
4aed2fd8e3 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
  tracing/kprobes: unregister_trace_probe needs to be called under mutex
  perf: expose event__process function
  perf events: Fix mmap offset determination
  perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
  perf, powerpc: Convert the FSL driver to use local64_t
  perf tools: Don't keep unreferenced maps when unmaps are detected
  perf session: Invalidate last_match when removing threads from rb_tree
  perf session: Free the ref_reloc_sym memory at the right place
  x86,mmiotrace: Add support for tracing STOS instruction
  perf, sched migration: Librarize task states and event headers helpers
  perf, sched migration: Librarize the GUI class
  perf, sched migration: Make the GUI class client agnostic
  perf, sched migration: Make it vertically scrollable
  perf, sched migration: Parameterize cpu height and spacing
  perf, sched migration: Fix key bindings
  perf, sched migration: Ignore unhandled task states
  perf, sched migration: Handle ignored migrate out events
  perf: New migration tool overview
  tracing: Drop cpparg() macro
  perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
  ...

Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
2010-08-06 09:30:52 -07:00
Linus Torvalds
ffd386a9a8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: allow limited allocation before slab is online
  percpu: make @dyn_size always mean min dyn_size in first chunk init functions
2010-08-04 15:17:52 -07:00
Suresh Siddha
6ee0578b4d workqueue: mark init_workqueues() as early_initcall()
Mark init_workqueues() as early_initcall() and thus it will be initialized
before smp bringup. init_workqueues() registers for the hotcpu notifier
and thus it should cope with the processors that are brought online after
the workqueues are initialized.

x86 smp bringup code uses workqueues and uses a workaround for the
cold boot process (as the workqueues are initialized post smp_init()).
Marking init_workqueues() as early_initcall() will pave the way for
cleaning up this code.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
2010-08-01 13:05:29 +02:00
Eric Paris
939a67fc4c Audit: split audit watch Kconfig
Audit watch should depend on CONFIG_AUDIT_SYSCALL and should select
FSNOTIFY.  This splits the spagetti like mixing of audit_watch and
audit_filter code so they can be configured seperately.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-07-28 09:58:19 -04:00
Eric Paris
67640b602f Audit: audit watches depend on fsnotify
CONFIG_AUDIT builds audit_watches which depend on fsnotify.  Make
CONFIG_AUDIT select fsnotify.

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2010-07-28 09:58:18 -04:00
Eric Paris
28a3a7eb3b audit: reimplement audit_trees using fsnotify rather than inotify
Simply switch audit_trees from using inotify to using fsnotify for it's
inode pinning and disappearing act information.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-07-28 09:58:17 -04:00
Tejun Heo
181a51f6e0 slow-work: kill it
slow-work doesn't have any user left.  Kill it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
2010-07-23 13:14:49 +02:00
Arnd Bergmann
5e3d20a68f init: Remove the BKL from startup code
I have shown by code review that no driver takes
the BKL at init time any more, so whatever the
init code was locking against is no longer there
and it is now safe to remove the BKL there.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Steven Rostedt <rostedt@goodmis>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-07-09 15:40:32 +02:00
Ingo Molnar
08f8ba0799 Merge commit 'v2.6.35-rc4' into perf/core
Merge reason: Pick up the latest perf fixes

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-07-05 08:30:58 +02:00
Linus Torvalds
123f94f22e Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Cure nr_iowait_cpu() users
  init: Fix comment
  init, sched: Fix race between init and kthreadd
2010-07-02 09:52:58 -07:00
Peter Zijlstra
9715856922 init: Fix comment
Apparently "pid-1" confuses people...

Requested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: torvalds@linux-foundation.org
Cc: randy.dunlap@oracle.com
Cc: Ilya Loginov <isloginov@gmail.com>
LKML-Reference: <1277887031.1868.82.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-30 10:42:44 +02:00
Thomas Gleixner
f384c954c9 Merge branch 'linus' into perf/core
Reason: Further changes conflict with upstream fixes

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-06-28 22:33:24 +02:00
Peter Zijlstra
b433c3d454 init, sched: Fix race between init and kthreadd
Ilya reported that on a very slow machine he could reliably
reproduce a race between forking init and kthreadd. We first
fork init so that it  obtains pid-1, however since the scheduler
is already fully running at this point it can preempt and run
the init thread before we spawn and set kthreadd_task.

The init thread can then attempt spawning kthreads without
kthreadd being present which results in an OOPS.

Reported-by: Ilya Loginov <isloginov@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1277736661.3561.110.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-28 18:21:30 +02:00
Tejun Heo
099a19d91c percpu: allow limited allocation before slab is online
This patch updates percpu allocator such that it can serve limited
amount of allocation before slab comes online.  This is primarily to
allow slab to depend on working percpu allocator.

Two parameters, PERCPU_DYNAMIC_EARLY_SIZE and SLOTS, determine how
much memory space and allocation map slots are reserved.  If this
reserved area is exhausted, WARN_ON_ONCE() will trigger and allocation
will fail till slab comes online.

The following changes are made to implement early alloc.

* pcpu_mem_alloc() now checks slab_is_available()

* Chunks are allocated using pcpu_mem_alloc()

* Init paths make sure ai->dyn_size is at least as large as
  PERCPU_DYNAMIC_EARLY_SIZE.

* Initial alloc maps are allocated in __initdata and copied to
  kmalloc'd areas once slab is online.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
2010-06-27 18:50:00 +02:00
Ingo Molnar
646b1db495 Merge commit 'v2.6.35-rc3' into perf/core
Merge reason: Go from -rc1 base to -rc3 base, merge in fixes.
2010-06-18 10:53:19 +02:00
Thomas Renninger
75cbfb97a1 ACPI: Do not try to set up acpi processor stuff on cores exceeding maxcpus=
Patch is against latest Linus master branch and is expected to be
safe bug fix.

You get:
ACPI: HARDWARE addr space,NOT supported yet
for each ACPI defined CPU which status is active, but exceeds
maxcpus= count.

As these "not booted" CPUs do not run an idle routine
and echo X >/proc/acpi/processor/*/throttling did not work
I couldn't find a way to really access not onlined/booted
machines. Still this should get fixed and
/proc/acpi/processor/X dirs of cores exceeding maxcpus
should not show up.

I wonder whether this could get cleaned up by truncating possible cpu mask
and nr_cpu_ids to setup_max_cpus early some day
(and not exporting setup_max_cpus anymore then).
But this needs touching of a lot other places...

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: travis@sgi.com
CC: linux-acpi@vger.kernel.org
CC: lenb@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-09 18:04:12 -04:00
Li Zefan
039ca4e74a tracing: Remove kmemtrace ftrace plugin
We have been resisting new ftrace plugins and removing existing
ones, and kmemtrace has been superseded by kmem trace events
and perf-kmem, so we remove it.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
[ remove kmemtrace from the makefile, handle slob too ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-06-09 17:31:22 +02:00
Américo Wang
30dbb20e68 tracing: Remove boot tracer
The boot tracer is useless. It simply logs the initcalls
but in fact these initcalls are also logged through printk
while using the initcall_debug kernel parameter.

Nobody seem to be using it so far. Then just remove it.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com>
[ remove the hooks in main.c, and the headers ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-06-08 23:31:28 +02:00
Linus Torvalds
1f73897861 Merge branch 'for-35' of git://repo.or.cz/linux-kbuild
* 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits)
  kbuild: Revert part of e8d400a to resolve a conflict
  kbuild: Fix checking of scm-identifier variable
  gconfig: add support to show hidden options that have prompts
  menuconfig: add support to show hidden options which have prompts
  gconfig: remove show_debug option
  gconfig: remove dbg_print_ptype() and dbg_print_stype()
  kconfig: fix zconfdump()
  kconfig: some small fixes
  add random binaries to .gitignore
  kbuild: Include gen_initramfs_list.sh and the file list in the .d file
  kconfig: recalc symbol value before showing search results
  .gitignore: ignore *.lzo files
  headerdep: perlcritic warning
  scripts/Makefile.lib: Align the output of LZO
  kbuild: Generate modules.builtin in make modules_install
  Revert "kbuild: specify absolute paths for cscope"
  kbuild: Do not unnecessarily regenerate modules.builtin
  headers_install: use local file handles
  headers_check: fix perl warnings
  export_report: fix perl warnings
  ...
2010-06-01 08:55:52 -07:00
Haicheng Li
1f522509c7 mem-hotplug: avoid multiple zones sharing same boot strapping boot_pageset
For each new populated zone of hotadded node, need to update its pagesets
with dynamically allocated per_cpu_pageset struct for all possible CPUs:

    1) Detach zone->pageset from the shared boot_pageset
       at end of __build_all_zonelists().

    2) Use mutex to protect zone->pageset when it's still
       shared in onlined_pages()

Otherwises, multiple zones of different nodes would share same boot strapping
boot_pageset for same CPU, which will finally cause below kernel panic:

  ------------[ cut here ]------------
  kernel BUG at mm/page_alloc.c:1239!
  invalid opcode: 0000 [#1] SMP
  ...
  Call Trace:
   [<ffffffff811300c1>] __alloc_pages_nodemask+0x131/0x7b0
   [<ffffffff81162e67>] alloc_pages_current+0x87/0xd0
   [<ffffffff81128407>] __page_cache_alloc+0x67/0x70
   [<ffffffff811325f0>] __do_page_cache_readahead+0x120/0x260
   [<ffffffff81132751>] ra_submit+0x21/0x30
   [<ffffffff811329c6>] ondemand_readahead+0x166/0x2c0
   [<ffffffff81132ba0>] page_cache_async_readahead+0x80/0xa0
   [<ffffffff8112a0e4>] generic_file_aio_read+0x364/0x670
   [<ffffffff81266cfa>] nfs_file_read+0xca/0x130
   [<ffffffff8117b20a>] do_sync_read+0xfa/0x140
   [<ffffffff8117bf75>] vfs_read+0xb5/0x1a0
   [<ffffffff8117c151>] sys_read+0x51/0x80
   [<ffffffff8103c032>] system_call_fastpath+0x16/0x1b
  RIP  [<ffffffff8112ff13>] get_page_from_freelist+0x883/0x900
   RSP <ffff88000d1e78a8>
  ---[ end trace 4bda28328b9990db ]

[akpm@linux-foundation.org: merge fix]
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Andi Kleen <andi.kleen@intel.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:01 -07:00
Jens Axboe
ee9a3607fb Merge branch 'master' into for-2.6.35
Conflicts:
	fs/ext3/fsync.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 21:27:26 +02:00
Jason Wessel
0b4b3827db x86, kgdb, init: Add early and late debug states
The kernel debugger can operate well before mm_init(), but the x86
hardware breakpoint code which uses the perf api requires that the
kernel allocators are initialized.

This means the kernel debug core needs to provide an optional arch
specific call back to allow the initialization functions to run after
the kernel has been further initialized.

The kdb shell already had a similar restriction with an early
initialization and late initialization.  The kdb_init() was moved into
the debug core's version of the late init which is called
dbg_late_init();

CC: kgdb-bugreport@lists.sourceforge.net
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:29 -05:00
Jason Wessel
67fc4e0cb9 kdb: core for kgdb back end (2 of 2)
This patch contains the hooks and instrumentation into kernel which
live outside the kernel/debug directory, which the kdb core
will call to run commands like lsmod, dmesg, bt etc...

CC: linux-arch@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Martin Hicks <mort@sgi.com>
2010-05-20 21:04:21 -05:00
Ingo Molnar
48652ced15 Merge commit 'v2.6.34-rc6' into sched/core 2010-05-07 11:27:54 +02:00
Jens Axboe
7407cf355f Merge branch 'master' into for-2.6.35
Conflicts:
	fs/block_dev.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-29 09:36:24 +02:00
Vivek Goyal
afc24d49c1 blk-cgroup: config options re-arrangement
This patch fixes few usability and configurability issues.

o All the cgroup based controller options are configurable from
  "Genral Setup/Control Group Support/" menu. blkio is the only exception.
  Hence make this option visible in above menu and make it configurable from
  there to bring it inline with rest of the cgroup based controllers.

o Get rid of CONFIG_DEBUG_CFQ_IOSCHED.

  This option currently does two things.

  - Enable printing of cgroup paths in blktrace
  - Enables CONFIG_DEBUG_BLK_CGROUP, which in turn displays additional stat
    files in cgroup.

  If we are using group scheduling, blktrace data is of not really much use
  if cgroup information is not present. To get this data, currently one has to
  also enable CONFIG_DEBUG_CFQ_IOSCHED, which in turn brings the overhead of
  all the additional debug stat files which is not desired.

  Hence, this patch moves printing of cgroup paths under
  CONFIG_CFQ_GROUP_IOSCHED.

  This allows us to get rid of CONFIG_DEBUG_CFQ_IOSCHED completely. Now all
  the debug stat files are controlled only by CONFIG_DEBUG_BLK_CGROUP which
  can be enabled through config menu.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Divyesh Shah <dpshah@google.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-26 19:27:56 +02:00
Phillip Lougher
df37bd156d initramfs: handle unrecognised decompressor when unpacking
The unpack routine fails to handle the decompress_method() returning
unrecognised decompressor (compress_name == NULL).  This results in the
routine looping eventually oopsing on an out of bounds memory access.

Note this bug is usually hidden, only triggering on trailing junk after
one or more correct compressed blocks.  The case of the compressed archive
being complete junk is (by accident?) caught by the if (state != Reset)
check because state is initialised to Start, but not updated due to the
decompressor not having been called.  Obviously if the junk is trailing a
correctly decompressed buffer, state == Reset from the previous call to
the decompressor.

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24 11:31:26 -07:00
Ingo Molnar
b257c14ceb Merge branch 'linus' into sched/core
Merge reason: merge the latest fixes, update to -rc4.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-15 09:36:16 +02:00
Li Zefan
32bd7eb5a7 sched: Remove remaining USER_SCHED code
This is left over from commit 7c9414385e ("sched: Remove USER_SCHED"")

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Dhaval Giani <dhaval.giani@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Howells <dhowells@redhat.com>
LKML-Reference: <4BA9A05F.7010407@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 20:12:00 +02:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Miao Xie
5ab116c934 cpuset: fix the problem that cpuset_mem_spread_node() returns an offline node
cpuset_mem_spread_node() returns an offline node, and causes an oops.

This patch fixes it by initializing task->mems_allowed to
node_states[N_HIGH_MEMORY], and updating task->mems_allowed when doing
memory hotplug.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Reported-by: Nick Piggin <npiggin@suse.de>
Tested-by: Nick Piggin <npiggin@suse.de>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:21 -07:00
Kirill A. Shutemov
0dea116876 cgroup: implement eventfd-based generic API for notifications
This patchset introduces eventfd-based API for notifications in cgroups
and implements memory notifications on top of it.

It uses statistics in memory controler to track memory usage.

Output of time(1) on building kernel on tmpfs:

Root cgroup before changes:
	make -j2  506.37 user 60.93s system 193% cpu 4:52.77 total
Non-root cgroup before changes:
	make -j2  507.14 user 62.66s system 193% cpu 4:54.74 total
Root cgroup after changes (0 thresholds):
	make -j2  507.13 user 62.20s system 193% cpu 4:53.55 total
Non-root cgroup after changes (0 thresholds):
	make -j2  507.70 user 64.20s system 193% cpu 4:55.70 total
Root cgroup after changes (1 thresholds, never crossed):
	make -j2  506.97 user 62.20s system 193% cpu 4:53.90 total
Non-root cgroup after changes (1 thresholds, never crossed):
	make -j2  507.55 user 64.08s system 193% cpu 4:55.63 total

This patch:

Introduce the write-only file "cgroup.event_control" in every cgroup.

To register new notification handler you need:
- create an eventfd;
- open a control file to be monitored. Callbacks register_event() and
  unregister_event() must be defined for the control file;
- write "<event_fd> <control_fd> <args>" to cgroup.event_control.
  Interpretation of args is defined by control file implementation;

eventfd will be woken up by control file implementation or when the
cgroup is removed.

To unregister notification handler just close eventfd.

If you need notification functionality for a control file you have to
implement callbacks register_event() and unregister_event() in the
struct cftype.

[kamezawa.hiroyu@jp.fujitsu.com: Kconfig fix]
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Dan Malek <dan@embeddedalley.com>
Cc: Vladislav Buzov <vbuzov@embeddedalley.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Alexander Shishkin <virtuoso@slind.org>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:37 -08:00
H Hartley Sweeten
7463e633c5 init/main.c: make setup_max_cpus static for !SMP
The only in tree external users of the symbol setup_max_cpus are in
arch/x86/.  The files ./kernel/alternative.c, ./kernel/visws_quirks.c, and
./mm/kmemcheck/kmemcheck.c are all guarded by CONFIG_SMP being defined.
For this case the symbol is an unsigned int and declared as an extern in
include/linux/smp.h.

When CONFIG_SMP is not defined the symbol setup_max_cpus is
a constant value that is only used in init/main.c.  Make the symbol
static for this case.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:32 -08:00
H Hartley Sweeten
8aaed5bec2 init/initramfs.c: fix "symbol shadows an earlier one" noise
The symbol 'count' is a local global variable in this file.  The function
clean_rootfs() should use a different symbol name to prevent "symbol
shadows an earlier one" noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:29 -08:00
Andreas Mohr
9a85b8d604 init/main.c: improve usability in case of init binary failure
- new Documentation/init.txt file describing various forms of failure
  trying to load the init binary after kernel bootup

- extend the init/main.c init failure message to direct to
  Documentation/init.txt

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:29 -08:00
Rafael J. Wysocki
452aa6999e mm/pm: force GFP_NOIO during suspend/hibernation and resume
There are quite a few GFP_KERNEL memory allocations made during
suspend/hibernation and resume that may cause the system to hang, because
the I/O operations they depend on cannot be completed due to the
underlying devices being suspended.

Avoid this problem by clearing the __GFP_IO and __GFP_FS bits in
gfp_allowed_mask before suspend/hibernation and restoring the original
values of these bits in gfp_allowed_mask durig the subsequent resume.

[akpm@linux-foundation.org: fix CONFIG_PM=n linkage]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:26 -08:00
Linus Torvalds
0f2cc4ecd8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
  init: Open /dev/console from rootfs
  mqueue: fix typo "failues" -> "failures"
  mqueue: only set error codes if they are really necessary
  mqueue: simplify do_open() error handling
  mqueue: apply mathematics distributivity on mq_bytes calculation
  mqueue: remove unneeded info->messages initialization
  mqueue: fix mq_open() file descriptor leak on user-space processes
  fix race in d_splice_alias()
  set S_DEAD on unlink() and non-directory rename() victims
  vfs: add NOFOLLOW flag to umount(2)
  get rid of ->mnt_parent in tomoyo/realpath
  hppfs can use existing proc_mnt, no need for do_kern_mount() in there
  Mirror MS_KERNMOUNT in ->mnt_flags
  get rid of useless vfsmount_lock use in put_mnt_ns()
  Take vfsmount_lock to fs/internal.h
  get rid of insanity with namespace roots in tomoyo
  take check for new events in namespace (guts of mounts_poll()) to namespace.c
  Don't mess with generic_permission() under ->d_lock in hpfs
  sanitize const/signedness for udf
  nilfs: sanitize const/signedness in dealing with ->d_name.name
  ...

Fix up fairly trivial (famous last words...) conflicts in
drivers/infiniband/core/uverbs_main.c and security/tomoyo/realpath.c
2010-03-04 08:15:33 -08:00
Eric W. Biederman
2bd3a997be init: Open /dev/console from rootfs
To avoid potential problems with an empty /dev open /dev/console
from rootfs instead of waiting to mount our root filesystem and
mounting it there.   This effectively guarantees that there will
be a device node, and it won't be on a filesystem that we will
ever unmount, so there are no issues with leaving /dev/console
open and pinning the filesystem.

This is actually more effective than automatically mounting
devtmpfs on /dev because it removes removes the occasionally
problematic assumption that /dev/console exists from the boot
code.

With this patch I was able to throw busybox on my /boot partition
(which has no /dev directory) and boot into userspace without
problems.

The only possible negative consequence I can think of is that
someone out there deliberately used did not use a character device
that is major 5 minor 2 for /dev/console.  Does anyone know of a
situation in which that could make sense?

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-03 14:56:07 -05:00
Linus Torvalds
fb7b096d94 Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits)
  x86: Fix out of order of gsi
  x86: apic: Fix mismerge, add arch_probe_nr_irqs() again
  x86, irq: Keep chip_data in create_irq_nr and destroy_irq
  xen: Remove unnecessary arch specific xen irq functions.
  smp: Use nr_cpus= to set nr_cpu_ids early
  x86, irq: Remove arch_probe_nr_irqs
  sparseirq: Use radix_tree instead of ptrs array
  sparseirq: Change irq_desc_ptrs to static
  init: Move radix_tree_init() early
  irq: Remove unnecessary bootmem code
  x86: Add iMac9,1 to pci_reboot_dmi_table
  x86: Convert i8259_lock to raw_spinlock
  x86: Convert nmi_lock to raw_spinlock
  x86: Convert ioapic_lock and vector_lock to raw_spinlock
  x86: Avoid race condition in pci_enable_msix()
  x86: Fix SCI on IOAPIC != 0
  x86, ia32_aout: do not kill argument mapping
  x86, irq: Move __setup_vector_irq() before the first irq enable in cpu online path
  x86, irq: Update the vector domain for legacy irqs handled by io-apic
  x86, irq: Don't block IRQ0_VECTOR..IRQ15_VECTOR's on all cpu's
  ...
2010-03-03 08:15:37 -08:00
Linus Torvalds
f66ffdedbf Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits)
  sched: Fix SCHED_MC regression caused by change in sched cpu_power
  sched: Don't use possibly stale sched_class
  kthread, sched: Remove reference to kthread_create_on_cpu
  sched: cpuacct: Use bigger percpu counter batch values for stats counters
  percpu_counter: Make __percpu_counter_add an inline function on UP
  sched: Remove member rt_se from struct rt_rq
  sched: Change usage of rt_rq->rt_se to rt_rq->tg->rt_se[cpu]
  sched: Remove unused update_shares_locked()
  sched: Use for_each_bit
  sched: Queue a deboosted task to the head of the RT prio queue
  sched: Implement head queueing for sched_rt
  sched: Extend enqueue_task to allow head queueing
  sched: Remove USER_SCHED
  sched: Fix the place where group powers are updated
  sched: Assume *balance is valid
  sched: Remove load_balance_newidle()
  sched: Unify load_balance{,_newidle}()
  sched: Add a lock break for PREEMPT=y
  sched: Remove from fwd decls
  sched: Remove rq_iterator from move_one_task
  ...

Fix up trivial conflicts in kernel/sched.c
2010-02-28 10:31:01 -08:00
Linus Torvalds
6556a67435 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (172 commits)
  perf_event, amd: Fix spinlock initialization
  perf_event: Fix preempt warning in perf_clock()
  perf tools: Flush maps on COMM events
  perf_events, x86: Split PMU definitions into separate files
  perf annotate: Handle samples not at objdump output addr boundaries
  perf_events, x86: Remove superflous MSR writes
  perf_events: Simplify code by removing cpu argument to hw_perf_group_sched_in()
  perf_events, x86: AMD event scheduling
  perf_events: Add new start/stop PMU callbacks
  perf_events: Report the MMAP pgoff value in bytes
  perf annotate: Defer allocating sym_priv->hist array
  perf symbols: Improve debugging information about symtab origins
  perf top: Use a macro instead of a constant variable
  perf symbols: Check the right return variable
  perf/scripts: Tag syscall_name helper as not yet available
  perf/scripts: Add perf-trace-python Documentation
  perf/scripts: Remove unnecessary PyTuple resizes
  perf/scripts: Add syscall tracing scripts
  perf/scripts: Add Python scripting engine
  perf/scripts: Remove check-perf-trace from listed scripts
  ...

Fix trivial conflict in tools/perf/util/probe-event.c
2010-02-28 10:20:25 -08:00
Linus Torvalds
d25e8dbdab Merge branch 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  oprofile/x86: fix msr access to reserved counters
  oprofile/x86: use kzalloc() instead of kmalloc()
  oprofile/x86: fix perfctr nmi reservation for mulitplexing
  oprofile/x86: add comment to counter-in-use warning
  oprofile/x86: warn user if a counter is already active
  oprofile/x86: implement randomization for IBS periodic op counter
  oprofile/x86: implement lsfr pseudo-random number generator for IBS
  oprofile/x86: implement IBS cpuid feature detection
  oprofile/x86: remove node check in AMD IBS initialization
  oprofile/x86: remove OPROFILE_IBS config option
  oprofile: remove EXPERIMENTAL from the config option description
  oprofile: remove tracing build dependency
2010-02-28 10:15:31 -08:00
Linus Torvalds
642c4c75a7 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (44 commits)
  rcu: Fix accelerated GPs for last non-dynticked CPU
  rcu: Make non-RCU_PROVE_LOCKING rcu_read_lock_sched_held() understand boot
  rcu: Fix accelerated grace periods for last non-dynticked CPU
  rcu: Export rcu_scheduler_active
  rcu: Make rcu_read_lock_sched_held() take boot time into account
  rcu: Make lockdep_rcu_dereference() message less alarmist
  sched, cgroups: Fix module export
  rcu: Add RCU_CPU_STALL_VERBOSE to dump detailed per-task information
  rcu: Fix rcutorture mod_timer argument to delay one jiffy
  rcu: Fix deadlock in TREE_PREEMPT_RCU CPU stall detection
  rcu: Convert to raw_spinlocks
  rcu: Stop overflowing signed integers
  rcu: Use canonical URL for Mathieu's dissertation
  rcu: Accelerate grace period if last non-dynticked CPU
  rcu: Fix citation of Mathieu's dissertation
  rcu: Documentation update for CONFIG_PROVE_RCU
  security: Apply lockdep-based checking to rcu_dereference() uses
  idr: Apply lockdep-based diagnostics to rcu_dereference() uses
  radix-tree: Disable RCU lockdep checking in radix tree
  vfs: Abstract rcu_dereference_check for files-fdtable use
  ...
2010-02-28 10:13:16 -08:00
Linus Torvalds
37d4008484 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (31 commits)
  crypto: aes_generic - Fix checkpatch errors
  crypto: fcrypt - Fix checkpatch errors
  crypto: ecb - Fix checkpatch errors
  crypto: des_generic - Fix checkpatch errors
  crypto: deflate - Fix checkpatch errors
  crypto: crypto_null - Fix checkpatch errors
  crypto: cipher - Fix checkpatch errors
  crypto: crc32 - Fix checkpatch errors
  crypto: compress - Fix checkpatch errors
  crypto: cast6 - Fix checkpatch errors
  crypto: cast5 - Fix checkpatch errors
  crypto: camellia - Fix checkpatch errors
  crypto: authenc - Fix checkpatch errors
  crypto: api - Fix checkpatch errors
  crypto: anubis - Fix checkpatch errors
  crypto: algapi - Fix checkpatch errors
  crypto: blowfish - Fix checkpatch errors
  crypto: aead - Fix checkpatch errors
  crypto: ablkcipher - Fix checkpatch errors
  crypto: pcrypt - call the complete function on error
  ...
2010-02-26 16:50:02 -08:00
Robert Richter
b309a294e5 oprofile: remove EXPERIMENTAL from the config option description
OProfile is already used for a long time and no longer experimental.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:13:54 +01:00
Paul E. McKenney
8bd93a2c5d rcu: Accelerate grace period if last non-dynticked CPU
Currently, rcu_needs_cpu() simply checks whether the current CPU
has an outstanding RCU callback, which means that the last CPU
to go into dyntick-idle mode might wait a few ticks for the
relevant grace periods to complete.  However, if all the other
CPUs are in dyntick-idle mode, and if this CPU is in a quiescent
state (which it is for RCU-bh and RCU-sched any time that we are
considering going into dyntick-idle mode), then the grace period
is instantly complete.

This patch therefore repeatedly invokes the RCU grace-period
machinery in order to force any needed grace periods to complete
quickly.  It does so a limited number of times in order to
prevent starvation by an RCU callback function that might pass
itself to call_rcu().

However, if any CPU other than the current one is not in
dyntick-idle mode, fall back to simply checking (with fix to bug
noted by Lai Jiangshan).  Also, take advantage of last
grace-period forcing, the opportunity to do so noted by Steve
Rostedt.  And apply simplified #ifdef condition suggested by
Frederic Weisbecker.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1266887105-1528-15-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 10:34:55 +01:00
Paul E. McKenney
d11c563dd2 sched: Use lockdep-based checking on rcu_dereference()
Update the rcu_dereference() usages to take advantage of the new
lockdep-based checking.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1266887105-1528-6-git-send-email-paulmck@linux.vnet.ibm.com>
[ -v2: fix allmodconfig missing symbol export build failure on x86 ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 10:34:26 +01:00
Yinghai Lu
2b633e3fac smp: Use nr_cpus= to set nr_cpu_ids early
On x86, before prefill_possible_map(), nr_cpu_ids will be NR_CPUS aka
CONFIG_NR_CPUS.

Add nr_cpus= to set nr_cpu_ids. so we can simulate cpus <=8 are installed on
normal config.

-v2: accordging to Christoph, acpi_numa_init should use nr_cpu_ids in stead of
     NR_CPUS.
-v3: add doc in kernel-parameters.txt according to Andrew.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-34-git-send-email-yinghai@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Tony Luck <tony.luck@intel.com>
2010-02-17 17:30:22 -08:00
Yinghai Lu
773e3eb7b8 init: Move radix_tree_init() early
Prepare for using radix trees in early_irq_init().

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-30-git-send-email-yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-17 17:26:33 -08:00
Ingo Molnar
6d3e0907b8 Merge branch 'sched/urgent' into sched/core
Merge reason: Merge dependent fix, update to latest -rc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-08 08:55:46 +01:00
Eric Paris
54bb6552bd ima: initialize ima before inodes can be allocated
ima wants to create an inode information struct (iint) when inodes are
allocated.  This means that at least the part of ima which does this
allocation (the allocation is filled with information later) should
before any inodes are created.  To accomplish this we split the ima
initialization routine placing the kmem cache allocator inside a
security_initcall() function.  Since this makes use of radix trees we also
need to make sure that is initialized before security_initcall().

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-02-07 03:06:22 -05:00
Roland McGrath
8433646601 kconfig CROSS_COMPILE option
This adds CROSS_COMPILE as a kconfig string so you can store it in
.config.  Then you can use plain "make" in the configured kernel build
directory to do the right cross compilation without setting the
command-line or environment variable every time.

With this, you can set up different build directories for different kernel
configurations, whether native or cross-builds, and then use the simple:

	make -C /build/dir M=module-source-dir

idiom to build modules for any given target kernel, indicating which one
by nothing but the build directory chosen.

I tried a version that defaults the string with env="CROSS_COMPILE" so
that in a "make oldconfig" with CROSS_COMPILE in the environment you can
just hit return to store the way you're building it.  But the kconfig
prompt for strings doesn't give you any way to say you want an empty
string instead of the default, so I punted that.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Anibal Monsalve Salazar <anibal@debian.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-02-02 14:33:54 +01:00
Dhaval Giani
7c9414385e sched: Remove USER_SCHED
Remove the USER_SCHED feature. It has been scheduled to be removed in
2.6.34 as per http://marc.info/?l=linux-kernel&m=125728479022976&w=2

Signed-off-by: Dhaval Giani <dhaval.giani@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1263990378.24844.3.camel@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-21 13:40:18 +01:00
Ingo Molnar
61405fea92 Merge branch 'perf/urgent' into perf/core
Merge reason: queue up dependent patch, update to -rc4

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13 10:08:50 +01:00
Albin Tonnerre
7dd65feb6c lib: add support for LZO-compressed kernels
This patch series adds generic support for creating and extracting
LZO-compressed kernel images, as well as support for using such images on
the x86 and ARM architectures, and support for creating and using
LZO-compressed initrd and initramfs images.

Russell King said:

: Testing on a Cortex A9 model:
: - lzo decompressor is 65% of the time gzip takes to decompress a kernel
: - lzo kernel is 9% larger than a gzip kernel
:
: which I'm happy to say confirms your figures when comparing the two.
:
: However, when comparing your new gzip code to the old gzip code:
: - new is 99% of the size of the old code
: - new takes 42% of the time to decompress than the old code
:
: What this means is that for a proper comparison, the results get even better:
: - lzo is 7.5% larger than the old gzip'd kernel image
: - lzo takes 28% of the time that the old gzip code took
:
: So the expense seems definitely worth the effort.  The only reason I
: can think of ever using gzip would be if you needed the additional
: compression (eg, because you have limited flash to store the image.)
:
: I would argue that the default for ARM should therefore be LZO.

This patch:

The lzo compressor is worse than gzip at compression, but faster at
extraction.  Here are some figures for an ARM board I'm working on:

Uncompressed size: 3.24Mo
gzip  1.61Mo 0.72s
lzo   1.75Mo 0.48s

So for a compression ratio that is still relatively close to gzip, it's
much faster to extract, at least in that case.

This part contains:
 - Makefile routine to support lzo compression
 - Fixes to the existing lzo compressor so that it can be used in
   compressed kernels
 - wrapper around the existing lzo1x_decompress, as it only extracts one
   block at a time, while we need to extract a whole file here
 - config dialog for kernel compression

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Tested-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Russell King <rmk@arm.linux.org.uk>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:04 -08:00
Steffen Klassert
16295bec63 padata: Generic parallelization/serialization interface
This patch introduces an interface to process data objects
in parallel. The parallelized objects return after serialization
in the same order as they were before the parallelization.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-01-06 19:47:10 +11:00
Li Zefan
07b139c8c8 perf events: Remove CONFIG_EVENT_PROFILE
Quoted from Ingo:

| This reminds me - i think we should eliminate CONFIG_EVENT_PROFILE -
| it's an unnecessary Kconfig complication. If both PERF_EVENTS and
| EVENT_TRACING is enabled we should expose generic tracepoints.
|
| Nor is it limited to event 'profiling', so it has become a misnomer as
| well.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B2F1557.2050705@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 10:33:06 +01:00
Linus Torvalds
3981e15286 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, irq: Allow 0xff for /proc/irq/[n]/smp_affinity on an 8-cpu system
  Makefile: Unexport LC_ALL instead of clearing it
  x86: Fix objdump version check in arch/x86/tools/chkobjdump.awk
  x86: Reenable TSC sync check at boot, even with NONSTOP_TSC
  x86: Don't use POSIX character classes in gen-insn-attr-x86.awk
  Makefile: set LC_CTYPE, LC_COLLATE, LC_NUMERIC to C
  x86: Increase MAX_EARLY_RES; insufficient on 32-bit NUMA
  x86: Fix checking of SRAT when node 0 ram is not from 0
  x86, cpuid: Add "volatile" to asm in native_cpuid()
  x86, msr: msrs_alloc/free for CONFIG_SMP=n
  x86, amd: Get multi-node CPU info from NodeId MSR instead of PCI config space
  x86: Add IA32_TSC_AUX MSR and use it
  x86, msr/cpuid: Register enough minors for the MSR and CPUID drivers
  initramfs: add missing decompressor error check
  bzip2: Add missing checks for malloc returning NULL
  bzip2/lzma/gzip: pre-boot malloc doesn't return NULL on failure
2009-12-19 09:48:14 -08:00
Linus Torvalds
aac3d39693 Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits)
  sched: Fix broken assertion
  sched: Assert task state bits at build time
  sched: Update task_state_arraypwith new states
  sched: Add missing state chars to TASK_STATE_TO_CHAR_STR
  sched: Move TASK_STATE_TO_CHAR_STR near the TASK_state bits
  sched: Teach might_sleep() about preemptible RCU
  sched: Make warning less noisy
  sched: Simplify set_task_cpu()
  sched: Remove the cfs_rq dependency from set_task_cpu()
  sched: Add pre and post wakeup hooks
  sched: Move kthread_bind() back to kthread.c
  sched: Fix select_task_rq() vs hotplug issues
  sched: Fix sched_exec() balancing
  sched: Ensure set_task_cpu() is never called on blocked tasks
  sched: Use TASK_WAKING for fork wakups
  sched: Select_task_rq_fair() must honour SD_LOAD_BALANCE
  sched: Fix task_hot() test order
  sched: Fix set_cpu_active() in cpu_down()
  sched: Mark boot-cpu active before smp_init()
  sched: Fix cpu_clock() in NMIs, on !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
  ...
2009-12-19 09:47:49 -08:00
Linus Torvalds
5a865c0606 Merge branch 'for-33' of git://repo.or.cz/linux-kbuild
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits)
  net: fix for utsrelease.h moving to generated
  gen_init_cpio: fixed fwrite warning
  kbuild: fix make clean after mismerge
  kbuild: generate modules.builtin
  genksyms: properly consider  EXPORT_UNUSED_SYMBOL{,_GPL}()
  score: add asm/asm-offsets.h wrapper
  unifdef: update to upstream revision 1.190
  kbuild: specify absolute paths for cscope
  kbuild: create include/generated in silentoldconfig
  scripts/package: deb-pkg: use fakeroot if available
  scripts/package: add KBUILD_PKG_ROOTCMD variable
  scripts/package: tar-pkg: use tar --owner=root
  Kbuild: clean up marker
  net: add net_tstamp.h to headers_install
  kbuild: move utsrelease.h to include/generated
  kbuild: move autoconf.h to include/generated
  drop explicit include of autoconf.h
  kbuild: move compile.h to include/generated
  kbuild: drop include/asm
  kbuild: do not check for include/asm-$ARCH
  ...

Fixed non-conflicting clean merge of modpost.c as per comments from
Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h
that needed to be changed to generated/autoconf.h)
2009-12-17 07:23:42 -08:00
Peter Zijlstra
933b0618d8 sched: Mark boot-cpu active before smp_init()
A UP machine has 1 active cpu, not having the boot-cpu in the
active map when starting the scheduler confuses things.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091216170517.423469527@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-16 19:01:53 +01:00
Phillip Lougher
54291362d2 initramfs: add missing decompressor error check
The decompressors return error by calling a supplied error function, and/or
by returning an error return value.  The initramfs code, however, fails to
check the exit code returned by the decompressor, and only checks the error
status set by calling the error function.

This patch adds a return code check and calls the error function.

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
LKML-Reference: <4b26b1ef.0+ZWxT6886olqcSc%phillip@lougher.demon.co.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-15 14:04:24 -08:00
H Hartley Sweeten
196a15b4ee init/main.c: fix symbol shadows noise
The symbol 'call' is a static symbol used for initcall_debug.  This same
symbol name is used locally by a couple functions and produces the
following sparse warnings:

	warning: symbol 'call' shadows an earlier one

Fix this noise by renaming the local symbols.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:26 -08:00
Jie Zhang
ea63763959 nommu: fix malloc performance by adding uninitialized flag
The NOMMU code currently clears all anonymous mmapped memory.  While this
is what we want in the default case, all memory allocation from userspace
under NOMMU has to go through this interface, including malloc() which is
allowed to return uninitialized memory.  This can easily be a significant
performance penalty.  So for constrained embedded systems were security is
irrelevant, allow people to avoid clearing memory unnecessarily.

This also alters the ELF-FDPIC binfmt such that it obtains uninitialised
memory for the brk and stack region.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:24 -08:00
Sam Ravnborg
273b281fa2 kbuild: move utsrelease.h to include/generated
Fix up all users of utsrelease.h

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:15 +01:00
Sam Ravnborg
9204595405 kbuild: move compile.h to include/generated
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:14 +01:00
Linus Torvalds
60d8ce2cd6 Merge branch 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timers, init: Limit the number of per cpu calibration bootup messages
  posix-cpu-timers: optimize and document timer_create callback
  clockevents: Add missing include to pacify sparse
  x86: vmiclock: Fix printk format
  x86: Fix printk format due to variable type change
  sparc: fix printk for change of variable type
  clocksource/events: Fix fallout of generic code changes
  nohz: Allow 32-bit machines to sleep for more than 2.15 seconds
  nohz: Track last do_timer() cpu
  nohz: Prevent clocksource wrapping during idle
  nohz: Type cast printk argument
  mips: Use generic mult/shift factor calculation for clocks
  clocksource: Provide a generic mult/shift factor calculation
  clockevents: Use u32 for mult and shift factors
  nohz: Introduce arch_needs_cpu
  nohz: Reuse ktime in sub-functions of tick_check_idle.
  time: Remove xtime_cache
  time: Implement logarithmic time accumulation
2009-12-08 19:27:08 -08:00
Uwe Kleine-König
9e9868a737 sysfs: deprecated features are to help old tools not to confuse them
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Greg KH <gregkh@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-08 13:23:39 -08:00
Linus Torvalds
1557d33007 Merge git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl-2.6: (43 commits)
  security/tomoyo: Remove now unnecessary handling of security_sysctl.
  security/tomoyo: Add a special case to handle accesses through the internal proc mount.
  sysctl: Drop & in front of every proc_handler.
  sysctl: Remove CTL_NONE and CTL_UNNUMBERED
  sysctl: kill dead ctl_handler definitions.
  sysctl: Remove the last of the generic binary sysctl support
  sysctl net: Remove unused binary sysctl code
  sysctl security/tomoyo: Don't look at ctl_name
  sysctl arm: Remove binary sysctl support
  sysctl x86: Remove dead binary sysctl support
  sysctl sh: Remove dead binary sysctl support
  sysctl powerpc: Remove dead binary sysctl support
  sysctl ia64: Remove dead binary sysctl support
  sysctl s390: Remove dead sysctl binary support
  sysctl frv: Remove dead binary sysctl support
  sysctl mips/lasat: Remove dead binary sysctl support
  sysctl drivers: Remove dead binary sysctl support
  sysctl crypto: Remove dead binary sysctl support
  sysctl security/keys: Remove dead binary sysctl support
  sysctl kernel: Remove binary sysctl logic
  ...
2009-12-08 07:38:50 -08:00
Linus Torvalds
607781762e Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
  rcu: Make RCU's CPU-stall detector be default
  rcu: Add expedited grace-period support for preemptible RCU
  rcu: Enable fourth level of TREE_RCU hierarchy
  rcu: Rename "quiet" functions
  rcu: Re-arrange code to reduce #ifdef pain
  rcu: Eliminate unneeded function wrapping
  rcu: Fix grace-period-stall bug on large systems with CPU hotplug
  rcu: Eliminate __rcu_pending() false positives
  rcu: Further cleanups of use of lastcomp
  rcu: Simplify association of forced quiescent states with grace periods
  rcu: Accelerate callback processing on CPUs not detecting GP end
  rcu: Mark init-time-only rcu_bootup_announce() as __init
  rcu: Simplify association of quiescent states with grace periods
  rcu: Rename dynticks_completed to completed_fqs
  rcu: Enable synchronize_sched_expedited() fastpath
  rcu: Remove inline from forward-referenced functions
  rcu: Fix note_new_gpnum() uses of ->gpnum
  rcu: Fix synchronization for rcu_process_gp_end() uses of ->completed counter
  rcu: Prepare for synchronization fixes: clean up for non-NO_HZ handling of ->completed counter
  rcu: Cleanup: balance rcu_irq_enter()/rcu_irq_exit() calls
  ...
2009-12-05 09:52:14 -08:00
Linus Torvalds
3e72b810e3 Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mutex: Fix missing conditions to build mutex_spin_on_owner()
  mutex: Better control mutex adaptive spinning config
  locking, task_struct: Reduce size on TRACE_IRQFLAGS and 64bit
  locking: Use __[SPIN|RW]_LOCK_UNLOCKED in [spin|rw]_lock_init()
  locking: Remove unused prototype
  locking: Reduce ifdefs in kernel/spinlock.c
  locking: Make inlining decision Kconfig based
2009-12-05 09:49:59 -08:00
Rusty Russell
f066a4f6df param: don't complain about unused module parameters.
Jon confirms that recent modprobe will look in /proc/cmdline, so these
cmdline options can still be used.

See http://bugzilla.kernel.org/show_bug.cgi?id=14164

Reported-by: Adam Williamson <awilliam@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-02 15:40:07 -08:00
Randy Dunlap
e9438e3193 sysfs: fix SYSFS_DEPRECATED_V2 prompt
The SYSFS_DEPRECATED_V2 says "remove" older, deprecated features, but it
actually enables them, so correct this confusing, backwards text.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 16:32:20 -08:00
David Howells
f13a48bd79 SLOW_WORK: Move slow_work's proc file to debugfs
Move slow_work's debugging proc file to debugfs.

Signed-off-by: David Howells <dhowells@redhat.com>
Requested-and-acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 08:20:31 -08:00
Mike Travis
feae3203d7 timers, init: Limit the number of per cpu calibration bootup messages
Limit the number of per cpu calibration messages by only
printing out results for the first cpu to boot.

Also, don't print "CPUx is down" as this is expected, and we
don't need 4096 reminders... ;-)

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091118002219.889552000@alcatraz.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-26 10:18:42 +01:00
David Howells
8fba10a42d SLOW_WORK: Allow the work items to be viewed through a /proc file
Allow the executing and queued work items to be viewed through a /proc file
for debugging purposes.  The contents look something like the following:

    THR PID   ITEM ADDR        FL MARK  DESC
    === ===== ================ == ===== ==========
      0  3005 ffff880023f52348  a 952ms FSC: OBJ17d3: LOOK
      1  3006 ffff880024e33668  2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2
      2  3165 ffff8800296dd180  a 424ms FSC: OBJ17e4: LOOK
      3  4089 ffff8800262c8d78  a 212ms FSC: OBJ17ea: CRTN
      4  4090 ffff88002792bed8  2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2
      5  4092 ffff88002a0ef308  2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2
      6  4094 ffff88002abaf4b8  2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2
      7  4095 ffff88002bb188e0  a 388ms FSC: OBJ17e9: CRTN
    vsq     - ffff880023d99668  1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2
    vsq     - ffff8800295d1740  1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2
    vsq     - ffff880025ba3308  1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2
    vsq     - ffff880024ec83e0  1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2
    vsq     - ffff880026618e00  1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2
    vsq     - ffff880025a2a4b8  1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2
    vsq     - ffff880023cbe6d8  9 212ms FSC: OBJ17eb: LOOK
    vsq     - ffff880024d37590  9 212ms FSC: OBJ17ec: LOOK
    vsq     - ffff880027746cb0  9 212ms FSC: OBJ17ed: LOOK
    vsq     - ffff880024d37ae8  9 212ms FSC: OBJ17ee: LOOK
    vsq     - ffff880024d37cb0  9 212ms FSC: OBJ17ef: LOOK
    vsq     - ffff880025036550  9 212ms FSC: OBJ17f0: LOOK
    vsq     - ffff8800250368e0  9 212ms FSC: OBJ17f1: LOOK
    vsq     - ffff880025036aa8  9 212ms FSC: OBJ17f2: LOOK

In the 'THR' column, executing items show the thread they're occupying and
queued threads indicate which queue they're on.  'PID' shows the process ID of
a slow-work thread that's executing something.  'FL' shows the work item flags.
'MARK' indicates how long since an item was queued or began executing.  Lastly,
the 'DESC' column permits the owner of an item to give some information.

Signed-off-by: David Howells <dhowells@redhat.com>
2009-11-19 18:10:51 +00:00
Eric W. Biederman
bb9074ff58 Merge commit 'v2.6.32-rc7'
Resolve the conflict between v2.6.32-rc7 where dn_def_dev_handler
gets a small bug fix and the sysctl tree where I am removing all
sysctl strategy routines.
2009-11-17 01:01:34 -08:00
Thomas Gleixner
6beb000923 locking: Make inlining decision Kconfig based
commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the
selection of which lock functions are inlined based on defines in
arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION

Despite of the name __always_inline__* the lock functions can be built
out of line depending on config options. Also if the arch does not set
some inline defines the generic code might set them; again depending on
config options.

This makes it unnecessary hard to figure out when and which lock
functions are inlined. Aside of that it makes it way harder and
messier for -rt to manipulate the lock functions.

Convert the inlining decision to CONFIG switches. Each lock function
is inlined depending on CONFIG_INLINE_*. The configs implement the
existing dependencies. The architecture code can select ARCH_INLINE_*
to signal that it wants the corresponding lock function inlined.
ARCH_INLINE_* is necessary as Kconfig ignores "depends on"
restrictions when a config element is selected.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20091109151428.504477141@linutronix.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-13 20:53:28 +01:00
Linus Torvalds
26a9ba160f Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Fix permission checks
  perf_events: Fix some typo in the perf events config description
2009-11-11 11:29:34 -08:00
Eric W. Biederman
26a7034b40 sysctl: Reduce sys_sysctl to a compatibility wrapper around /proc/sys
To simply maintenance and to be able to remove all of the binary
sysctl support from various subsystems I have rewritten the binary
sysctl code as a compatibility wrapper around proc/sys.

The code is built around a hard coded table based on the table
in sysctl_check.c that lists all of our current binary sysctls
and provides enough information to convert from the sysctl
binary input into into ascii and back again.  New in this
patch is the realization that the only dynamic entries
that need to be handled have ifname as the asscii string
and ifindex as their ctl_name.

When a sys_sysctl is called the code now looks in the
translation table converting the binary name to the
path under /proc where the value is to be found.  Opens
that file, and calls into a format conversion wrapper
that calls fop->read and then fop->write as appropriate.

Since in practice the practically no one uses or tests
sys_sysctl rewritting the code to be beautiful is a little
silly.  The redeeming merit of this work is it allows us to
rip out all of the binary sysctl syscall support from
everywhere else in the tree.  Allowing us to remove
a lot of dead (after this patch) and barely maintained code.

In addition it becomes much easier to optimize the sysctl
implementation for being the backing store of /proc/sys,
without having to worry about sys_sysctl.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-11 00:42:05 -08:00
Thadeu Lima de Souza Cascardo
dd77038d23 perf_events: Fix some typo in the perf events config description
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Cc: trivial@kernel.org
LKML-Reference: <1256938346-8230-1-git-send-email-cascardo@holoscopio.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-02 16:53:35 +01:00
Kumar Gala
022382a561 powerpc: Minor cleanup to init/Kconfig
We dont need to depend on PPC64 explicitly as all powerpc platforms
(32-bit and 64-bit) define PPC now.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-27 16:42:41 +11:00
Paul E. McKenney
9b1d82fa16 rcu: "Tiny RCU", The Bloatwatch Edition
This patch is a version of RCU designed for !SMP provided for a
small-footprint RCU implementation.  In particular, the
implementation of synchronize_rcu() is extremely lightweight and
high performance. It passes rcutorture testing in each of the
four relevant configurations (combinations of NO_HZ and PREEMPT)
on x86.  This saves about 1K bytes compared to old Classic RCU
(which is no longer in mainline), and more than three kilobytes
compared to Hierarchical RCU (updated to 2.6.30):

	CONFIG_TREE_RCU:

	   text	   data	    bss	    dec	    filename
	    183       4       0     187     kernel/rcupdate.o
	   2783     520      36    3339     kernel/rcutree.o
				   3526 Total (vs 4565 for v7)

	CONFIG_TREE_PREEMPT_RCU:

	   text	   data	    bss	    dec	    filename
	    263       4       0     267     kernel/rcupdate.o
	   4594     776      52    5422     kernel/rcutree.o
	   			   5689 Total (6155 for v7)

	CONFIG_TINY_RCU:

	   text	   data	    bss	    dec	    filename
	     96       4       0     100     kernel/rcupdate.o
	    734      24       0     758     kernel/rcutiny.o
	    			    858 Total (vs 848 for v7)

The above is for x86.  Your mileage may vary on other platforms.
Further compression is possible, but is being procrastinated.

Changes from v7 (http://lkml.org/lkml/2009/10/9/388)

o	Apply Lai Jiangshan's review comments (aside from
might_sleep() 	in synchronize_sched(), which is covered by SMP builds).

o	Fix up expedited primitives.

Changes from v6 (http://lkml.org/lkml/2009/9/23/293).

o	Forward ported to put it into the 2.6.33 stream.

o	Added lockdep support.

o	Make lightweight rcu_barrier.

Changes from v5 (http://lkml.org/lkml/2009/6/23/12).

o	Ported to latest pre-2.6.32 merge window kernel.

	- Renamed rcu_qsctr_inc() to rcu_sched_qs().
	- Renamed rcu_bh_qsctr_inc() to rcu_bh_qs().
	- Provided trivial rcu_cpu_notify().
	- Provided trivial exit_rcu().
	- Provided trivial rcu_needs_cpu().
	- Fixed up the rcu_*_enter/exit() functions in linux/hardirq.h.

o	Removed the dependence on EMBEDDED, with a view to making
	TINY_RCU default for !SMP at some time in the future.

o	Added (trivial) support for expedited grace periods.

Changes from v4 (http://lkml.org/lkml/2009/5/2/91) include:

o	Squeeze the size down a bit further by removing the
	->completed field from struct rcu_ctrlblk.

o	This permits synchronize_rcu() to become the empty function.
	Previous concerns about rcutorture were unfounded, as
	rcutorture correctly handles a constant value from
	rcu_batches_completed() and rcu_batches_completed_bh().

Changes from v3 (http://lkml.org/lkml/2009/3/29/221) include:

o	Changed rcu_batches_completed(), rcu_batches_completed_bh()
	rcu_enter_nohz(), rcu_exit_nohz(), rcu_nmi_enter(), and
	rcu_nmi_exit(), to be static inlines, as suggested by David
	Howells.  Doing this saves about 100 bytes from rcutiny.o.
	(The numbers between v3 and this v4 of the patch are not directly
	comparable, since they are against different versions of Linux.)

Changes from v2 (http://lkml.org/lkml/2009/2/3/333) include:

o	Fix whitespace issues.

o	Change short-circuit "||" operator to instead be "+" in order
to 	fix performance bug noted by "kraai" on LWN.

		(http://lwn.net/Articles/324348/)

Changes from v1 (http://lkml.org/lkml/2009/1/13/440) include:

o	This version depends on EMBEDDED as well as !SMP, as suggested
	by Ingo.

o	Updated rcu_needs_cpu() to unconditionally return zero,
	permitting the CPU to enter dynticks-idle mode at any time.
	This works because callbacks can be invoked upon entry to
	dynticks-idle mode.

o	Paul is now OK with this being included, based on a poll at
the 	Kernel Miniconf at linux.conf.au, where about ten people said
	that they cared about saving 900 bytes on single-CPU systems.

o	Applies to both mainline and tip/core/rcu.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: avi@redhat.com
Cc: mtosatti@redhat.com
LKML-Reference: <12565226351355-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 09:40:29 +01:00
Linus Torvalds
f579bbcd9b Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: fix requeue_pi key imbalance
  futex: Fix typo in FUTEX_WAIT/WAKE_BITSET_PRIVATE definitions
  rcu: Place root rcu_node structure in separate lockdep class
  rcu: Make hot-unplugged CPU relinquish its own RCU callbacks
  rcu: Move rcu_barrier() to rcutree
  futex: Move exit_pi_state() call to release_mm()
  futex: Nullify robust lists after cleanup
  futex: Fix locking imbalance
  panic: Fix panic message visibility by calling bust_spinlocks(0) before dying
  rcu: Replace the rcu_barrier enum with pointer to call_rcu*() function
  rcu: Clean up code based on review feedback from Josh Triplett, part 4
  rcu: Clean up code based on review feedback from Josh Triplett, part 3
  rcu: Fix rcu_lock_map build failure on CONFIG_PROVE_LOCKING=y
  rcu: Clean up code to address Ingo's checkpatch feedback
  rcu: Clean up code based on review feedback from Josh Triplett, part 2
  rcu: Clean up code based on review feedback from Josh Triplett
2009-10-08 12:16:35 -07:00
Peter Zijlstra
906010b213 perf_event: Provide vmalloc() based mmap() backing
Some architectures such as Sparc, ARM and MIPS (basically
everything with flush_dcache_page()) need to deal with dcache
aliases by carefully placing pages in both kernel and user maps.

These architectures typically have to use vmalloc_user() for this.

However, on other architectures, vmalloc() is not needed and has
the downsides of being more restricted and slower than regular
allocations.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Miller <davem@davemloft.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1254830228.21044.272.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-06 14:21:50 +02:00
Linus Torvalds
94a8d5caba Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (39 commits)
  cpumask: Move deprecated functions to end of header.
  cpumask: remove unused deprecated functions, avoid accusations of insanity
  cpumask: use new-style cpumask ops in mm/quicklist.
  cpumask: use mm_cpumask() wrapper: x86
  cpumask: use mm_cpumask() wrapper: um
  cpumask: use mm_cpumask() wrapper: mips
  cpumask: use mm_cpumask() wrapper: mn10300
  cpumask: use mm_cpumask() wrapper: m32r
  cpumask: use mm_cpumask() wrapper: arm
  cpumask: Use accessors for cpu_*_mask: um
  cpumask: Use accessors for cpu_*_mask: powerpc
  cpumask: Use accessors for cpu_*_mask: mips
  cpumask: Use accessors for cpu_*_mask: m32r
  cpumask: remove arch_send_call_function_ipi
  cpumask: arch_send_call_function_ipi_mask: s390
  cpumask: arch_send_call_function_ipi_mask: powerpc
  cpumask: arch_send_call_function_ipi_mask: mips
  cpumask: arch_send_call_function_ipi_mask: m32r
  cpumask: arch_send_call_function_ipi_mask: alpha
  cpumask: remove obsolete topology_core_siblings and topology_thread_siblings: ia64
  ...
2009-09-23 18:14:11 -07:00
Alexey Dobriyan
2bcd57ab61 headers: utsname.h redux
* remove asm/atomic.h inclusion from linux/utsname.h --
   not needed after kref conversion
 * remove linux/utsname.h inclusion from files which do not need it

NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 18:13:10 -07:00
Rusty Russell
72d78d05cb cpumask: remove unused cpu_mask_all
It's only defined for NR_CPUS > BITS_PER_LONG; cpu_all_mask is always
defined (and const).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-09-24 09:34:36 +09:30
Linus Torvalds
c37efa9325 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (30 commits)
  Use macros for .data.page_aligned section.
  Use macros for .bss.page_aligned section.
  Use new __init_task_data macro in arch init_task.c files.
  kbuild: Don't define ALIGN and ENTRY when preprocessing linker scripts.
  arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0
  kbuild: add static to prototypes
  kbuild: fail build if recordmcount.pl fails
  kbuild: set -fconserve-stack option for gcc 4.5
  kbuild: echo the record_mcount command
  gconfig: disable "typeahead find" search in treeviews
  kbuild: fix cc1 options check to ensure we do not use -fPIC when compiling
  checkincludes.pl: add option to remove duplicates in place
  markup_oops: use modinfo to avoid confusion with underscored module names
  checkincludes.pl: provide usage helper
  checkincludes.pl: close file as soon as we're done with it
  ctags: usability fix
  kernel hacking: move STRIP_ASM_SYMS from General
  gitignore usr/initramfs_data.cpio.bz2 and usr/initramfs_data.cpio.lzma
  kbuild: Check if linker supports the -X option
  kbuild: introduce ld-option
  ...

Fix trivial conflict in scripts/basic/fixdep.c
2009-09-23 15:37:02 -07:00
Paul E. McKenney
1eba8f8438 rcu: Clean up code based on review feedback from Josh Triplett, part 2
These issues identified during an old-fashioned face-to-face code
review extending over many hours.

o	Add comments for tricky parts of code, and correct comments
	that have passed their sell-by date.

o	Get rid of the vestiges of rcu_init_sched(), which is no
	longer needed now that PREEMPT_RCU is gone.

o	Move the #include of rcutree_plugin.h to the end of
	rcutree.c, which means that, rather than having a random
	collection of forward declarations, the new set of forward
	declarations document the set of plugins.  The new home for
	this #include also allows __rcu_init_preempt() to move into
	rcutree_plugin.h.

o	Fix rcu_preempt_check_callbacks() to be static.

Suggested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <12537246443924-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra <peterz@infradead.org>
2009-09-23 19:46:29 +02:00
Linus Torvalds
746942d06a Merge branch 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6
* 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6:
  SFI: remove unneeded includes
  sfi: Remove unused code
  SFI: Hook PCI MMCONFIG
  x86: add arch-specific SFI support
  SFI: add capability to parse ACPI tables
  SFI: add platform-independent core support
  SFI: create linux/sfi.h
  SFI: Simple Firmware Interface - MAINTAINERS, Kconfig
2009-09-23 09:34:07 -07:00
Jan Beulich
4481374ce8 mm: replace various uses of num_physpages by totalram_pages
Sizing of memory allocations shouldn't depend on the number of physical
pages found in a system, as that generally includes (perhaps a huge amount
of) non-RAM pages.  The amount of what actually is usable as storage
should instead be used as a basis here.

Some of the calculations (i.e.  those not intending to use high memory)
should likely even use (totalram_pages - totalhigh_pages).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:38 -07:00
Linus Torvalds
43c1266ce4 Merge branch 'perfcounters-rename-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-rename-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Tidy up after the big rename
  perf: Do the big rename: Performance Counters -> Performance Events
  perf_counter: Rename 'event' to event_id/hw_event
  perf_counter: Rename list_entry -> group_entry, counter_list -> group_list

Manually resolved some fairly trivial conflicts with the tracing tree in
include/trace/ftrace.h and kernel/trace/trace_syscalls.c.
2009-09-21 09:15:07 -07:00
Linus Torvalds
b8c7f1dc5c Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: Fix whitespace inconsistencies
  rcu: Fix thinko, actually initialize full tree
  rcu: Apply results of code inspection of kernel/rcutree_plugin.h
  rcu: Add WARN_ON_ONCE() consistency checks covering state transitions
  rcu: Fix synchronize_rcu() for TREE_PREEMPT_RCU
  rcu: Simplify rcu_read_unlock_special() quiescent-state accounting
  rcu: Add debug checks to TREE_PREEMPT_RCU for premature grace periods
  rcu: Kconfig help needs to say that TREE_PREEMPT_RCU scales down
  rcutorture: Occasionally delay readers enough to make RCU force_quiescent_state
  rcu: Initialize multi-level RCU grace periods holding locks
  rcu: Need to update rnp->gpnum if preemptable RCU is to be reliable
2009-09-21 09:06:52 -07:00
Ingo Molnar
57c0c15b52 perf: Tidy up after the big rename
- provide compatibility Kconfig entry for existing PERF_COUNTERS .config's

 - provide courtesy copy of old perf_counter.h, for user-space projects

 - small indentation fixups

 - fix up MAINTAINERS

 - fix small x86 printout fallout

 - fix up small PowerPC comment fallout (use 'counter' as in register)

Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:34:11 +02:00
Ingo Molnar
cdd6c482c9 perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )

Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:28:04 +02:00
Randy Dunlap
99657c7857 kernel hacking: move STRIP_ASM_SYMS from General
Sam suggested moving STRIP_ASM_SYMS into the Kernel hacking menu
from the General Setup menu.  It makes more sense there.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:27:42 +02:00
Len Brown
c602c65b2f Merge branch 'linus' into sfi-release
Conflicts:
	arch/x86/kernel/setup.c
	drivers/acpi/power.c
	init/main.c

Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-19 00:11:26 -04:00
Christoph Hellwig
fc5377668c tracing: Remove markers
Now that the last users of markers have migrated to the event
tracer we can kill off the (now orphan) support code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090917173527.GA1699@lst.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18 21:22:08 +02:00
Paul E. McKenney
bbe3eae8bb rcu: Kconfig help needs to say that TREE_PREEMPT_RCU scales down
To quote Valdis:

    This leaves somebody who has a laptop wondering which
    choice is best for a system with only one or two cores that
    has CONFIG_PREEMPT defined. One choice says it scales down
    nicely, the other explicitly has a 'depends on PREEMPT'
    attached to it...

So add "scales down nicely" to TREE_PREEMPT_RCU to match that of
TREE_RCU.

Suggested-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
LKML-Reference: <12528585112362-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18 00:05:53 +02:00
Linus Torvalds
ab86e5765d Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev
  debugfs: Modify default debugfs directory for debugging pktcdvd.
  debugfs: Modified default dir of debugfs for debugging UHCI.
  debugfs: Change debugfs directory of IWMC3200
  debugfs: Change debuhgfs directory of trace-events-sample.h
  debugfs: Fix mount directory of debugfs by default in events.txt
  hpilo: add poll f_op
  hpilo: add interrupt handler
  hpilo: staging for interrupt handling
  driver core: platform_device_add_data(): use kmemdup()
  Driver core: Add support for compatibility classes
  uio: add generic driver for PCI 2.3 devices
  driver-core: move dma-coherent.c from kernel to driver/base
  mem_class: fix bug
  mem_class: use minor as index instead of searching the array
  driver model: constify attribute groups
  UIO: remove 'default n' from Kconfig
  Driver core: Add accessor for device platform data
  Driver core: move dev_get/set_drvdata to drivers/base/dd.c
  Driver core: add new device to bus's list before probing
2009-09-16 08:27:10 -07:00
Kay Sievers
2b2af54a5b Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev
Devtmpfs lets the kernel create a tmpfs instance called devtmpfs
very early at kernel initialization, before any driver-core device
is registered. Every device with a major/minor will provide a
device node in devtmpfs.

Devtmpfs can be changed and altered by userspace at any time,
and in any way needed - just like today's udev-mounted tmpfs.
Unmodified udev versions will run just fine on top of it, and will
recognize an already existing kernel-created device node and use it.
The default node permissions are root:root 0600. Proper permissions
and user/group ownership, meaningful symlinks, all other policy still
needs to be applied by userspace.

If a node is created by devtmps, devtmpfs will remove the device node
when the device goes away. If the device node was created by
userspace, or the devtmpfs created node was replaced by userspace, it
will no longer be removed by devtmpfs.

If it is requested to auto-mount it, it makes init=/bin/sh work
without any further userspace support. /dev will be fully populated
and dynamic, and always reflect the current device state of the kernel.
With the commonly used dynamic device numbers, it solves the problem
where static devices nodes may point to the wrong devices.

It is intended to make the initial bootup logic simpler and more robust,
by de-coupling the creation of the inital environment, to reliably run
userspace processes, from a complex userspace bootstrap logic to provide
a working /dev.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Tested-By: Harald Hoyer <harald@redhat.com>
Tested-By: Scott James Remnant <scott@ubuntu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15 09:50:49 -07:00
Linus Torvalds
ada3fa1505 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
  powerpc64: convert to dynamic percpu allocator
  sparc64: use embedding percpu first chunk allocator
  percpu: kill lpage first chunk allocator
  x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
  percpu: update embedding first chunk allocator to handle sparse units
  percpu: use group information to allocate vmap areas sparsely
  vmalloc: implement pcpu_get_vm_areas()
  vmalloc: separate out insert_vmalloc_vm()
  percpu: add chunk->base_addr
  percpu: add pcpu_unit_offsets[]
  percpu: introduce pcpu_alloc_info and pcpu_group_info
  percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
  percpu: add @align to pcpu_fc_alloc_fn_t
  percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
  percpu: drop @static_size from first chunk allocators
  percpu: generalize first chunk allocator selection
  percpu: build first chunk allocators selectively
  percpu: rename 4k first chunk allocator to page
  percpu: improve boot messages
  percpu: fix pcpu_reclaim() locking
  ...

Fix trivial conflict as by Tejun Heo in kernel/sched.c
2009-09-15 09:39:44 -07:00
Linus Torvalds
774a694f8c Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (64 commits)
  sched: Fix sched::sched_stat_wait tracepoint field
  sched: Disable NEW_FAIR_SLEEPERS for now
  sched: Keep kthreads at default priority
  sched: Re-tune the scheduler latency defaults to decrease worst-case latencies
  sched: Turn off child_runs_first
  sched: Ensure that a child can't gain time over it's parent after fork()
  sched: enable SD_WAKE_IDLE
  sched: Deal with low-load in wake_affine()
  sched: Remove short cut from select_task_rq_fair()
  sched: Turn on SD_BALANCE_NEWIDLE
  sched: Clean up topology.h
  sched: Fix dynamic power-balancing crash
  sched: Remove reciprocal for cpu_power
  sched: Try to deal with low capacity, fix update_sd_power_savings_stats()
  sched: Try to deal with low capacity
  sched: Scale down cpu_power due to RT tasks
  sched: Implement dynamic cpu_power
  sched: Add smt_gain
  sched: Update the cpu_power sum during load-balance
  sched: Add SD_PREFER_SIBLING
  ...
2009-09-11 13:23:18 -07:00
Paul E. McKenney
7db905e636 rcu: Move end of special early-boot RCU operation earlier
Ingo was getting warnings from rcu_scheduler_starting()
indicating that context switches had occurred before RCU ended
its special early-boot handling of grace periods.

This is a dangerous condition, as it indicates that RCU might
have prematurely ended grace periods.  This exploratory fix
moves rcu_scheduler_starting() earlier in boot.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-04 09:29:34 +02:00
Ingo Molnar
29e2035bdd Merge branch 'linus' into core/rcu
Merge reason: Avoid fuzz in init/main.c and update from rc6 to rc8.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-04 09:29:05 +02:00
Feng Tang
6ae6996a46 SFI: add platform-independent core support
drivers/sfi/sfi_core.c contains the generic SFI implementation.
It has a private header, sfi_core.h, for its own use and the
private use of future files in drivers/sfi/

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28 19:57:33 -04:00
Thomas Gleixner
fa84e9eecf init: Move sched_clock_init after late_time_init
Some architectures initialize clocks and timers in late_time_init and
x86 wants to do the same to avoid FIXMAP hackery for calibrating the
TSC. That would result in undefined sched_clock readout and wreckaged
printk timestamps again. We probably have those already on archs which
do all their time/clock setup in late_time_init.

There is no harm to move that after late_time_init except that a few
more boot timestamps are stale. The scheduler is not active at that
point so no real wreckage is expected.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Cc: linux-arch@vger.kernel.org
2009-08-27 16:38:18 +02:00
Linus Torvalds
7d63e6359a Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Fix too large stack usage in do_one_initcall()
  tracing: handle broken names in ftrace filter
  ftrace: Unify effect of writing to trace_options and option/*
2009-08-25 11:23:43 -07:00
Paul E. McKenney
6b3ef48adf rcu: Remove CONFIG_PREEMPT_RCU
Now that CONFIG_TREE_PREEMPT_RCU is in place, there is no
further need for CONFIG_PREEMPT_RCU.  Remove it, along with
whatever subtle bugs it may (or may not) contain.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josht@linux.vnet.ibm.com
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
LKML-Reference: <125097461396-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 10:32:40 +02:00
Paul E. McKenney
f41d911f8c rcu: Merge preemptable-RCU functionality into hierarchical RCU
Create a kernel/rcutree_plugin.h file that contains definitions
for preemptable RCU (or, under the #else branch of the #ifdef,
empty definitions for the classic non-preemptable semantics).
These definitions fit into plugins defined in kernel/rcutree.c
for this purpose.

This variant of preemptable RCU uses a new algorithm whose
read-side expense is roughly that of classic hierarchical RCU
under CONFIG_PREEMPT. This new algorithm's update-side expense
is similar to that of classic hierarchical RCU, and, in absence
of read-side preemption or blocking, is exactly that of classic
hierarchical RCU.  Perhaps more important, this new algorithm
has a much simpler implementation, saving well over 1,000 lines
of code compared to mainline's implementation of preemptable
RCU, which will hopefully be retired in favor of this new
algorithm.

The simplifications are obtained by maintaining per-task
nesting state for running tasks, and using a simple
lock-protected algorithm to handle accounting when tasks block
within RCU read-side critical sections, making use of lessons
learned while creating numerous user-level RCU implementations
over the past 18 months.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josht@linux.vnet.ibm.com
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
LKML-Reference: <12509746134003-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 10:32:40 +02:00
Ingo Molnar
4a683bf94b tracing: Fix too large stack usage in do_one_initcall()
One of my testboxes triggered this nasty stack overflow crash
during SCSI probing:

[    5.874004] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.875004] device: 'sda': device_add
[    5.878004] BUG: unable to handle kernel NULL pointer dereference at 00000a0c
[    5.878004] IP: [<b1008321>] print_context_stack+0x81/0x110
[    5.878004] *pde = 00000000
[    5.878004] Thread overran stack, or stack corrupted
[    5.878004] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[    5.878004] last sysfs file:
[    5.878004]
[    5.878004] Pid: 1, comm: swapper Not tainted (2.6.31-rc6-tip-01272-g9919e28-dirty #5685)
[    5.878004] EIP: 0060:[<b1008321>] EFLAGS: 00010083 CPU: 0
[    5.878004] EIP is at print_context_stack+0x81/0x110
[    5.878004] EAX: cf8a3000 EBX: cf8a3fe4 ECX: 00000049 EDX: 00000000
[    5.878004] ESI: b1cfce84 EDI: 00000000 EBP: cf8a3018 ESP: cf8a2ff4
[    5.878004]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    5.878004] Process swapper (pid: 1, ti=cf8a2000 task=cf8a8000 task.ti=cf8a3000)
[    5.878004] Stack:
[    5.878004]  b1004867 fffff000 cf8a3ffc
[    5.878004] Call Trace:
[    5.878004]  [<b1004867>] ? kernel_thread_helper+0x7/0x10
[    5.878004] BUG: unable to handle kernel NULL pointer dereference at 00000a0c
[    5.878004] IP: [<b1008321>] print_context_stack+0x81/0x110
[    5.878004] *pde = 00000000
[    5.878004] Thread overran stack, or stack corrupted
[    5.878004] Oops: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC

The oops did not reveal any more details about the real stack
that we have and the system got into an infinite loop of
recursive pagefaults.

So i booted with CONFIG_STACK_TRACER=y and the 'stacktrace' boot
parameter. The box did not crash (timings/conditions probably
changed a tiny bit to trigger the catastrophic crash), but the
/debug/tracing/stack_trace file was rather revealing:

        Depth    Size   Location    (72 entries)
        -----    ----   --------
  0)     3704      52   __change_page_attr+0xb8/0x290
  1)     3652      24   __change_page_attr_set_clr+0x43/0x90
  2)     3628      60   kernel_map_pages+0x108/0x120
  3)     3568      40   prep_new_page+0x7d/0x130
  4)     3528      84   get_page_from_freelist+0x106/0x420
  5)     3444     116   __alloc_pages_nodemask+0xd7/0x550
  6)     3328      36   allocate_slab+0xb1/0x100
  7)     3292      36   new_slab+0x1c/0x160
  8)     3256      36   __slab_alloc+0x133/0x2b0
  9)     3220       4   kmem_cache_alloc+0x1bb/0x1d0
 10)     3216     108   create_object+0x28/0x250
 11)     3108      40   kmemleak_alloc+0x81/0xc0
 12)     3068      24   kmem_cache_alloc+0x162/0x1d0
 13)     3044      52   scsi_pool_alloc_command+0x29/0x70
 14)     2992      20   scsi_host_alloc_command+0x22/0x70
 15)     2972      24   __scsi_get_command+0x1b/0x90
 16)     2948      28   scsi_get_command+0x35/0x90
 17)     2920      24   scsi_setup_blk_pc_cmnd+0xd4/0x100
 18)     2896     128   sd_prep_fn+0x332/0xa70
 19)     2768      36   blk_peek_request+0xe7/0x1d0
 20)     2732      56   scsi_request_fn+0x54/0x520
 21)     2676      12   __generic_unplug_device+0x2b/0x40
 22)     2664      24   blk_execute_rq_nowait+0x59/0x80
 23)     2640     172   blk_execute_rq+0x6b/0xb0
 24)     2468      32   scsi_execute+0xe0/0x140
 25)     2436      64   scsi_execute_req+0x152/0x160
 26)     2372      60   scsi_vpd_inquiry+0x6c/0x90
 27)     2312      44   scsi_get_vpd_page+0x112/0x160
 28)     2268      52   sd_revalidate_disk+0x1df/0x320
 29)     2216      92   rescan_partitions+0x98/0x330
 30)     2124      52   __blkdev_get+0x309/0x350
 31)     2072       8   blkdev_get+0xf/0x20
 32)     2064      44   register_disk+0xff/0x120
 33)     2020      36   add_disk+0x6e/0xb0
 34)     1984      44   sd_probe_async+0xfb/0x1d0
 35)     1940      44   __async_schedule+0xf4/0x1b0
 36)     1896       8   async_schedule+0x12/0x20
 37)     1888      60   sd_probe+0x305/0x360
 38)     1828      44   really_probe+0x63/0x170
 39)     1784      36   driver_probe_device+0x5d/0x60
 40)     1748      16   __device_attach+0x49/0x50
 41)     1732      32   bus_for_each_drv+0x5b/0x80
 42)     1700      24   device_attach+0x6b/0x70
 43)     1676      16   bus_attach_device+0x47/0x60
 44)     1660      76   device_add+0x33d/0x400
 45)     1584      52   scsi_sysfs_add_sdev+0x6a/0x2c0
 46)     1532     108   scsi_add_lun+0x44b/0x460
 47)     1424     116   scsi_probe_and_add_lun+0x182/0x4e0
 48)     1308      36   __scsi_add_device+0xd9/0xe0
 49)     1272      44   ata_scsi_scan_host+0x10b/0x190
 50)     1228      24   async_port_probe+0x96/0xd0
 51)     1204      44   __async_schedule+0xf4/0x1b0
 52)     1160       8   async_schedule+0x12/0x20
 53)     1152      48   ata_host_register+0x171/0x1d0
 54)     1104      60   ata_pci_sff_activate_host+0xf3/0x230
 55)     1044      44   ata_pci_sff_init_one+0xea/0x100
 56)     1000      48   amd_init_one+0xb2/0x190
 57)      952       8   local_pci_probe+0x13/0x20
 58)      944      32   pci_device_probe+0x68/0x90
 59)      912      44   really_probe+0x63/0x170
 60)      868      36   driver_probe_device+0x5d/0x60
 61)      832      20   __driver_attach+0x89/0xa0
 62)      812      32   bus_for_each_dev+0x5b/0x80
 63)      780      12   driver_attach+0x1e/0x20
 64)      768      72   bus_add_driver+0x14b/0x2d0
 65)      696      36   driver_register+0x6e/0x150
 66)      660      20   __pci_register_driver+0x53/0xc0
 67)      640       8   amd_init+0x14/0x16
 68)      632     572   do_one_initcall+0x2b/0x1d0
 69)       60      12   do_basic_setup+0x56/0x6a
 70)       48      20   kernel_init+0x84/0xce
 71)       28      28   kernel_thread_helper+0x7/0x10

There's a lot of fat functions on that stack trace, but
the largest of all is do_one_initcall(). This is due to
the boot trace entry variables being on the stack.

Fixing this is relatively easy, initcalls are fundamentally
serialized, so we can move the local variables to file scope.

Note that this large stack footprint was present for a
couple of months already - what pushed my system over
the edge was the addition of kmemleak to the call-chain:

  6)     3328      36   allocate_slab+0xb1/0x100
  7)     3292      36   new_slab+0x1c/0x160
  8)     3256      36   __slab_alloc+0x133/0x2b0
  9)     3220       4   kmem_cache_alloc+0x1bb/0x1d0
 10)     3216     108   create_object+0x28/0x250
 11)     3108      40   kmemleak_alloc+0x81/0xc0
 12)     3068      24   kmem_cache_alloc+0x162/0x1d0
 13)     3044      52   scsi_pool_alloc_command+0x29/0x70

This pushes the total to ~3800 bytes, only a tiny bit
more was needed to corrupt the on-kernel-stack thread_info.

The fix reduces the stack footprint from 572 bytes
to 28 bytes.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-21 13:03:22 +02:00
Ingo Molnar
fa08661af8 Merge commit 'v2.6.31-rc6' into core/rcu
Merge reason: the branch was on pre-rc1 .30, update to latest.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 18:56:13 +02:00
Tejun Heo
384be2b18a Merge branch 'percpu-for-linus' into percpu-for-next
Conflicts:
	arch/sparc/kernel/smp_64.c
	arch/x86/kernel/cpu/perf_counter.c
	arch/x86/kernel/setup_percpu.c
	drivers/cpufreq/cpufreq_ondemand.c
	mm/percpu.c

Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids.  As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 14:45:31 +09:00
Tejun Heo
d6647bdf98 init: set nr_cpu_ids before setup_per_cpu_areas()
nr_cpu_ids is dependent only on cpu_possible_map and
setup_per_cpu_areas() already depends on cpu_possible_map and will use
nr_cpu_ids.  Initialize nr_cpu_ids before setting up percpu areas.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 12:56:54 +09:00
Ingo Molnar
f26542600e perf_counter: Set the CONFIG_PERF_COUNTERS default to y if CONFIG_PROFILING=y
If user has already enabled profiling support in the kernel
(for oprofile, old-style profiling of ftrace) then offer up
perfcounters with a y default in interactive kconfig sessions.

Still keep it off by default otherwise.

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04 18:19:30 +02:00
Peter Zijlstra
470a1396c2 tracing, perf_counter: Add help text to CONFIG_EVENT_PROFILE
Explain what tracepoint profiling sources are about.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jeff Garzik <jeff@garzik.org>
LKML-Reference: <1248856508.6987.3041.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 13:47:53 +02:00
Chris Wilson
d4d7d0b954 perf_counter: Fix the tracepoint channel to perfcounters
Fix a missed rename in EVENT_PROFILE support so that it gets
built and allows tracepoint tracing from the 'perf' tool.

Fix a typo in the (never before built & enabled) portion in
perf_counter.c as well, and update that code to the
attr.config changes as well.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Gamari <bgamari.foss@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1246869094-21237-1-git-send-email-chris@chris-wilson.co.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-13 09:23:10 +02:00
Tejun Heo
c43768cbb7 Merge branch 'master' into for-next
Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix
changes.  As alpha in percpu tree uses 'weak' attribute instead of
inline assembly, there's no need for __used attribute.

Conflicts:
	arch/alpha/include/asm/percpu.h
	arch/mn10300/kernel/vmlinux.lds.S
	include/linux/percpu-defs.h
2009-07-04 07:13:18 +09:00
Paul E. McKenney
c17ef45342 rcu: Remove Classic RCU
Remove Classic RCU, given that the combination of Tree RCU and
the proposed Bloatwatch RCU do everything that Classic RCU can
with fewer bugs.

Tree RCU has been default in x86 builds for almost six months,
and seems to be quite reliable, so there does not seem to be
much justification for keeping the Classic RCU code and config
complexity around anymore.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: akpm@linux-foundation.org
Cc: niv@us.ibm.com
Cc: dvhltc@us.ibm.com
Cc: dipankar@in.ibm.com
Cc: dhowells@redhat.com
Cc: lethal@linux-sh.org
Cc: kernel@wantstofly.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-24 15:05:13 +02:00
Tejun Heo
e74e396204 percpu: use dynamic percpu allocator as the default percpu allocator
This patch makes most !CONFIG_HAVE_SETUP_PER_CPU_AREA archs use
dynamic percpu allocator.  The first chunk is allocated using
embedding helper and 8k is reserved for modules.  This ensures that
the new allocator behaves almost identically to the original allocator
as long as static percpu variables are concerned, so it shouldn't
introduce much breakage.

s390 and alpha use custom SHIFT_PERCPU_PTR() to work around addressing
range limit the addressing model imposes.  Unfortunately, this breaks
if the address is specified using a variable, so for now, the two
archs aren't converted.

The following architectures are affected by this change.

* sh
* arm
* cris
* mips
* sparc(32)
* blackfin
* avr32
* parisc (broken, under investigation)
* m32r
* powerpc(32)

As this change makes the dynamic allocator the default one,
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is replaced with its invert -
CONFIG_HAVE_LEGACY_PER_CPU_AREA, which is added to yet-to-be converted
archs.  These archs implement their own setup_per_cpu_areas() and the
conversion is not trivial.

* powerpc(64)
* sparc(64)
* ia64
* alpha
* s390

Boot and batch alloc/free tests on x86_32 with debug code (x86_32
doesn't use default first chunk initialization).  Compile tested on
sparc(32), powerpc(32), arm and alpha.

Kyle McMartin reported that this change breaks parisc.  The problem is
still under investigation and he is okay with pushing this patch
forward and fixing parisc later.

[ Impact: use dynamic allocator for most archs w/o custom percpu setup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
2009-06-24 15:13:35 +09:00
Len Brown
fbe8cddd2d Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', 'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release 2009-06-24 01:19:50 -04:00
Linus Torvalds
31950eb66f mm/init: cpu_hotplug_init() must be initialized before SLAB
SLAB uses get/put_online_cpus() which use a mutex which is itself only
initialized when cpu_hotplug_init() is called.  Currently we hang suring
boot in SLAB due to doing that too late.

Reported by James Bottomley and Sachin Sant (and possibly others).
Debugged by Benjamin Herrenschmidt.

This just removes the dynamic initialization of the data structures, and
replaces it with a static one, avoiding this dependency entirely, and
removing one unnecessary special initcall.

Tested-by: Sachin Sant <sachinp@in.ibm.com>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22 21:18:12 -07:00
Benjamin Herrenschmidt
dcce284a25 mm: Extend gfp masking to the page allocator
The page allocator also needs the masking of gfp flags during boot,
so this moves it out of slab/slub and uses it with the page allocator
as well.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:12:57 -07:00
Peter Oberparleiter
b99b87f70c kernel: constructor support
Call constructors (gcc-generated initcall-like functions) during kernel
start and module load.  Constructors are e.g.  used for gcov data
initialization.

Disable constructor support for usermode Linux to prevent conflicts with
host glibc.

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:57 -07:00
Benjamin Herrenschmidt
c868d55011 mm: Move pgtable_cache_init() earlier
Some architectures need to initialize SLAB caches to be able
to allocate page tables. They do that from pgtable_cache_init()
so the later should be called earlier now, best is before
vmalloc_init().

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 21:14:42 -07:00
Linus Torvalds
517d08699b Merge branch 'akpm'
* akpm: (182 commits)
  fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset
  fbdev: *bfin*: fix __dev{init,exit} markings
  fbdev: *bfin*: drop unnecessary calls to memset
  fbdev: bfin-t350mcqb-fb: drop unused local variables
  fbdev: blackfin has __raw I/O accessors, so use them in fb.h
  fbdev: s1d13xxxfb: add accelerated bitblt functions
  tcx: use standard fields for framebuffer physical address and length
  fbdev: add support for handoff from firmware to hw framebuffers
  intelfb: fix a bug when changing video timing
  fbdev: use framebuffer_release() for freeing fb_info structures
  radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?
  s3c-fb: CPUFREQ frequency scaling support
  s3c-fb: fix resource releasing on error during probing
  carminefb: fix possible access beyond end of carmine_modedb[]
  acornfb: remove fb_mmap function
  mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF
  mb862xxfb: restrict compliation of platform driver to PPC
  Samsung SoC Framebuffer driver: add Alpha Channel support
  atmel-lcdc: fix pixclock upper bound detection
  offb: use framebuffer_alloc() to allocate fb_info struct
  ...

Manually fix up conflicts due to kmemcheck in mm/slab.c
2009-06-16 19:50:13 -07:00
Miao Xie
58568d2a82 cpuset,mm: update tasks' mems_allowed in time
Fix allocating page cache/slab object on the unallowed node when memory
spread is set by updating tasks' mems_allowed after its cpuset's mems is
changed.

In order to update tasks' mems_allowed in time, we must modify the code of
memory policy.  Because the memory policy is applied in the process's
context originally.  After applying this patch, one task directly
manipulates anothers mems_allowed, and we use alloc_lock in the
task_struct to protect mems_allowed and memory policy of the task.

But in the fast path, we didn't use lock to protect them, because adding a
lock may lead to performance regression.  But if we don't add a lock,the
task might see no nodes when changing cpuset's mems_allowed to some
non-overlapping set.  In order to avoid it, we set all new allowed nodes,
then clear newly disallowed ones.

[lee.schermerhorn@hp.com:
  The rework of mpol_new() to extract the adjusting of the node mask to
  apply cpuset and mpol flags "context" breaks set_mempolicy() and mbind()
  with MPOL_PREFERRED and a NULL nodemask--i.e., explicit local
  allocation.  Fix this by adding the check for MPOL_PREFERRED and empty
  node mask to mpol_new_mpolicy().

  Remove the now unneeded 'nodes = NULL' from mpol_new().

  Note that mpol_new_mempolicy() is always called with a non-NULL
  'nodes' parameter now that it has been removed from mpol_new().
  Therefore, we don't need to test nodes for NULL before testing it for
  'empty'.  However, just to be extra paranoid, add a VM_BUG_ON() to
  verify this assumption.]
[lee.schermerhorn@hp.com:

  I don't think the function name 'mpol_new_mempolicy' is descriptive
  enough to differentiate it from mpol_new().

  This function applies cpuset set context, usually constraining nodes
  to those allowed by the cpuset.  However, when the 'RELATIVE_NODES flag
  is set, it also translates the nodes.  So I settled on
  'mpol_set_nodemask()', because the comment block for mpol_new() mentions
  that we need to call this function to "set nodes".

  Some additional minor line length, whitespace and typo cleanup.]
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Paul Menage <menage@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:31 -07:00