Commit Graph

21 Commits

Author SHA1 Message Date
Jean Delvare
44c1bcd4bc hwmon: (it87) Add support for the IT8721F/IT8758E
Add support for the IT8721F/IT8758E. These new chips differ from the
older IT87xxF chips in the following ways:
* ADC LSB is 12 mV instead of 16 mV.
* PWM values are 8-bit instead of 7-bit.
There are other minor changes we don't have to care about in the
driver.

Another change is that we will handle internal voltage scaling in the
driver instead of delegating the work to user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:51 +02:00
Jean Delvare
cccfc9c4bb hwmon: (it87) Validate auto pwm settings
Before switching to automatic fan control mode, make sure that all the
trip points make sense. Otherwise, the control loop could lead to
weird fan behavior.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:21 +01:00
Jean Delvare
4f3f51bc21 hwmon: (it87) Add support for old automatic fan speed control
Add support for the automatic fan speed control interface as
implemented by IT8705F chips up to revision F and IT8712F chips up to
revision G. This implementation fits very well in our standard sysfs
interface.

I implemented the old and not the new interface because the only chip
I have at hand is an old one, and the new interface is more difficult
to map to the standard sysfs interface. Adding support later should be
possible though, if someone with a supported chip is interested.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:21 +01:00
Jean Delvare
404a552d8a hwmon: (it87) Drop dead web links in documentation
Unfortunately ITE is no longer publicly providing datasheets for their
IT87xxF series of chips. They may send them on request if you ask
politely.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:21 +01:00
Jean Delvare
d9b327c310 hwmon: (it87) Add support for beep on alarm
The IT87xxF chips support beeping on alarm, if properly wired and
configured. There is one control bit for each input type (temperature,
fan, voltage.) Let the user see and change them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:17 +01:00
Jean Delvare
895ff26768 hwmon: (it87) Verify the VID pin usage
The VID input pins can alternatively be used as GPIOs. Make sure we
have at least 4 pins used for VID, otherwise don't bother reading and
exposing VID.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Adam Nielsen <a.nielsen@shikadi.net>
2009-12-09 20:35:47 +01:00
Jean-Marc Spaggiari
b4da93e4b0 hwmon: (it87) Add support for the ITE IT8720F
Allow it87.c to handle IT8720 chipset like IT8718 in order to
retrieve voltage, temperatures and fans speed from sensors
tools. Also updating the related documentation.

Signed-off-by: Jean-Marc Spaggiari <jean-marc@spaggiari.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07 16:37:32 +01:00
Jean Delvare
4ed1077953 hwmon: (it87) Fix thermal sensor type values
The it87 driver doesn't follow the standard sensor type values as
documented in Documentation/hwmon/sysfs-interface. It uses value 2 for
thermistors instead of value 4. This causes "sensors" to tell the user
that the chip is setup for a transistor while it is actually setup for
a thermistor.

Using value 4 for thermistors solves the problem. For compatibility
reasons, we still accept value 2 but emit a warning message so that
users update their configuration files.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2008-10-17 17:51:16 +02:00
Andrew Paprocki
816d8c6a25 hwmon: (it87) Support for 16-bit fan reading in it8705 >= rev 0x03
The it8705 chip supports 16-bit fan tachometers in revisions at least
>= 0x03 (Version G). This patch enables 16-bit fan readings on all
revisions >= 0x03 just like the it8712, it8716, and it8718 chips.

Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:06 +02:00
Andrew Paprocki
0475169c13 hwmon: (it87) Support for 16-bit fan reading in it8712 >= rev 0x07
The it8712 chip supports 16-bit fan tachometers in revisions >= 0x07.
Revisions >= 0x08 dropped support for 8-bit fan divisor registers. The
patch enables 16-bit fan readings on all revisions >= 0x07 just like
the it8716 and it8718 chips.

Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:06 +02:00
Jean Delvare
f1d8e33263 hwmon: (it87) Discard a dead e-mail address
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:42 -05:00
Jean Delvare
c7f1f7166a hwmon: (it87) Add support for fan4 and fan5
Add support for the IT8716F and IT8718F fan4 and fan5. The late
revisions of the IT8712F have these too but support is harder to add
and nobody asked for it yet, so I didn't include it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09 22:56:30 -04:00
Rudolf Marek
08a8f6e9e6 hwmon/it87: Add IT8726F support
Add support for IT8726F chip driver, which is just same as
IT8716F with additional glue logic for AMD power sequencing.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19 14:22:13 -04:00
Jean Delvare
f8d0c19a93 hwmon/it87: Add PWM base frequency control
Let the user select the base PWM frequency when using the it87
hardware monitoring driver. Different frequencies can give better
control on some fans.

Also update the documentation to mention the PWM frequency control
files, with misc cleanups to the PWM section.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-02-14 21:15:02 +01:00
Jean Delvare
8e9afcbbde hwmon/it87: Remove the SMBus interface support
This interface was useless as the LPC ISA-like interface is always
available, is faster, and is more reliable. This cuts the driver
size by some 20%.

This change is also required to later convert the it87 driver to a
platform driver, so that we can get rid of i2c-isa in a near future.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-12 18:18:28 +01:00
Jean Delvare
b19367c6f4 it87: Copyright update
it87: Copyright update

I think my contributions to the it87 driver over the past two
years qualify me as a co-author of this driver.

Also drop old comments of dubious usefulness.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28 15:31:13 -07:00
Jean Delvare
87673dd735 it87: Add support for the IT8718F
it87: Add support for the IT8718F

The IT8718F is a Super-I/O chip with integrated hardware monitoring
functions. It is very similar to the IT8716F, so adding support to the
it87 driver was pretty straightforward. The most significant difference
is that the IT8718F has up to 8 VID pins, instead of 6 for the older
chips.

For the IT8718F, the VID value can only be read from Super-I/O space.

Userspace support is already in lm_sensors SVN (to be soon released
as 2.10.1.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28 15:31:13 -07:00
Jean Delvare
17d648bf57 it87: Add support for the IT8716F
it87: Add support for the IT8716F

The IT8716F is a Super-I/O chip with integrated hardware monitoring
functions. It is very similar to the IT8712F, so adding support to the
it87 driver was pretty straightforward. The most significant change here
is that the IT8716F has 16-bit fan speed counters, so the user no more
needs to tweak the fan clock dividers to get the best readings.

Userspace support is already in lm_sensors SVN (to be soon released
as 2.10.1.)

Thanks to Stian Oksavik, Olivier Nicolas, Prakash Punnoor and
Juergen Kilb for testing the early versions of this patch.

Thanks also to ITE for providing datasheets and answering my questions.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28 15:31:13 -07:00
Jean Delvare
c5e3fbf22c [PATCH] hwmon: Fix reboot on it87 driver load
Only scan I2C address 0x2d. This is the default address and no IT87xxF
chip was ever seen on I2C at a different address. These chips are
better accessed through their ISA interface anyway.

This fixes bug #5889, although it doesn't address the whole class
of problems. We'd need the ability to blacklist arbitrary I2C addresses
on systems known to contain I2C devices which behave badly when probed.

Plan the I2C interface for removal as well. If nobody complains within
a year, it will confirm my impression that the I2C interface isn't
actually needed by anyone.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-06 12:02:15 -08:00
Jean Delvare
9174999628 [PATCH] hwmon: Drop legacy ISA address support from it87
Drop legacy ISA address support from the it87 driver. All supported
chips are Super-I/O chips, so the device ISA address can be safely read
from Super-I/O space rather than blindly assumed.

Two nearby inaccurate documentation statements have been fixed as well:
* The IT8705F doesn't have an SMBus interface.
* The SiS950 doesn't have a distinct prefix.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 14:02:09 -07:00
Jean Delvare
ede7fbdf52 [PATCH] I2C: Move hwmon drivers (3/3)
Part 3: Move the drivers documentation, plus two general documentation
files.

Note that the patch "adds trailing whitespace", because it does move the
files as-is, and some files happen to have trailing whitespace.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-11 14:47:41 -07:00