Commit Graph

460 Commits

Author SHA1 Message Date
Linus Torvalds
2fe77b81c7 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [ACPI/CPUFREQ] Introduce bios_limit per cpu cpufreq sysfs interface
  [CPUFREQ] make internal cpufreq_add_dev_* static
  [CPUFREQ] use an enum for speedstep processor identification
  [CPUFREQ] Document units for transition latency
  [CPUFREQ] Use global sysfs cpufreq structure for conservative governor tunings
  [CPUFREQ] Documentation: ABI: /sys/devices/system/cpu/cpu#/cpufreq/
  [CPUFREQ] powernow-k6: set transition latency value so ondemand governor can be used
  [CPUFREQ] cpumask: don't put a cpumask on the stack in x86...cpufreq/powernow-k8.c
2009-12-11 15:59:23 -08:00
Linus Torvalds
11bd04f6f3 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (109 commits)
  PCI: fix coding style issue in pci_save_state()
  PCI: add pci_request_acs
  PCI: fix BUG_ON triggered by logical PCIe root port removal
  PCI: remove ifdefed pci_cleanup_aer_correct_error_status
  PCI: unconditionally clear AER uncorr status register during cleanup
  x86/PCI: claim SR-IOV BARs in pcibios_allocate_resource
  PCI: portdrv: remove redundant definitions
  PCI: portdrv: remove unnecessary struct pcie_port_data
  PCI: portdrv: minor cleanup for pcie_port_device_register
  PCI: portdrv: add missing irq cleanup
  PCI: portdrv: enable device before irq initialization
  PCI: portdrv: cleanup service irqs initialization
  PCI: portdrv: check capabilities first
  PCI: portdrv: move PME capability check
  PCI: portdrv: remove redundant pcie type calculation
  PCI: portdrv: cleanup pcie_device registration
  PCI: portdrv: remove redundant pcie_port_device_probe
  PCI: Always set prefetchable base/limit upper32 registers
  PCI: read-modify-write the pcie device control register when initiating pcie flr
  PCI: show dma_mask bits in /sys
  ...

Fixed up conflicts in:
	arch/x86/kernel/amd_iommu_init.c
	drivers/pci/dmar.c
	drivers/pci/hotplug/acpiphp_glue.c
2009-12-11 12:18:16 -08:00
Bob Moore
b00eb796f1 ACPICA: Update version to 20091112.
Version 20091112.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-11-24 21:31:11 -05:00
Lin Ming
2263576cfc ACPICA: Add post-order callback to acpi_walk_namespace
The existing interface only has a pre-order callback. This change
adds an additional parameter for a post-order callback which will
be more useful for bus scans. ACPICA BZ 779.

Also update the external calls to acpi_walk_namespace.

http://www.acpica.org/bugzilla/show_bug.cgi?id=779

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-11-24 21:31:10 -05:00
Bob Moore
cc3316e7a9 ACPICA: Update version to 20091013
Version 20091013.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-11-24 20:30:05 -05:00
Thomas Renninger
e2f74f355e [ACPI/CPUFREQ] Introduce bios_limit per cpu cpufreq sysfs interface
This interface is mainly intended (and implemented) for ACPI _PPC BIOS
frequency limitations, but other cpufreq drivers can also use it for
similar use-cases.

Why is this needed:

Currently it's not obvious why cpufreq got limited.
People see cpufreq/scaling_max_freq reduced, but this could have
happened by:
  - any userspace prog writing to scaling_max_freq
  - thermal limitations
  - hardware (_PPC in ACPI case) limitiations

Therefore export bios_limit (in kHz) to:
  - Point the user that it's the BIOS (broken or intended) which limits
    frequency
  - Export it as a sysfs interface for userspace progs.
    While this was a rarely used feature on laptops, there will appear
    more and more server implemenations providing "Green IT" features like
    allowing the service processor to limit the frequency. People want
    to know about HW/BIOS frequency limitations.

All ACPI P-state driven cpufreq drivers are covered with this patch:
  - powernow-k8
  - powernow-k7
  - acpi-cpufreq

Tested with a patched DSDT which limits the first two cores (_PPC returns 1)
via _PPC, exposed by bios_limit:
# echo 2200000 >cpu2/cpufreq/scaling_max_freq
# cat cpu*/cpufreq/scaling_max_freq
2600000
2600000
2200000
2200000
# #scaling_max_freq shows general user/thermal/BIOS limitations

# cat cpu*/cpufreq/bios_limit
2600000
2600000
2800000
2800000
# #bios_limit only shows the HW/BIOS limitation

CC: Pallipadi Venkatesh <venkatesh.pallipadi@intel.com>
CC: Len Brown <lenb@kernel.org>
CC: davej@codemonkey.org.uk
CC: linux@dominikbrodowski.net

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-11-24 13:33:34 -05:00
Matt Domsch
0584396157 PCI: PCIe AER: honor ACPI HEST FIRMWARE FIRST mode
Feedback from Hidetoshi Seto and Kenji Kaneshige incorporated.  This
correctly handles PCI-X bridges, PCIe root ports and endpoints, and
prints debug messages when invalid/reserved types are found in the
HEST.  PCI devices not in domain/segment 0 are not represented in
HEST, thus will be ignored.

Today, the PCIe Advanced Error Reporting (AER) driver attaches itself
to every PCIe root port for which BIOS reports it should, via ACPI
_OSC.

However, _OSC alone is insufficient for newer BIOSes.  Part of ACPI
4.0 is the new APEI (ACPI Platform Error Interfaces) which is a way
for OS and BIOS to handshake over which errors for which components
each will handle.  One table in ACPI 4.0 is the Hardware Error Source
Table (HEST), where BIOS can define that errors for certain PCIe
devices (or all devices), should be handled by BIOS ("Firmware First
mode"), rather than be handled by the OS.

Dell PowerEdge 11G server BIOS defines Firmware First mode in HEST, so
that it may manage such errors, log them to the System Event Log, and
possibly take other actions.  The aer driver should honor this, and
not attach itself to devices noted as such.

Furthermore, Kenji Kaneshige reminded us to disallow changing the AER
registers when respecting Firmware First mode.  Platform firmware is
expected to manage these, and if changes to them are allowed, it could
break that firmware's behavior.

The HEST parsing code may be replaced in the future by a more
feature-rich implementation.  This patch provides the minimum needed
to prevent breakage until that implementation is available.

Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04 13:06:25 -08:00
Bjorn Helgaas
6622d8cee7 ACPI: remove acpi_device_uid() and related stuff
Nobody uses acpi_device_uid(), so this patch removes it.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25 15:09:49 -04:00
Bjorn Helgaas
1131b938f0 ACPI: remove acpi_device.flags.hardware_id
Every acpi_device has at least one ID (if there's no _HID or _CID, we
give it a synthetic or default ID).  So there's no longer a need to
check whether an ID exists; we can just use it.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25 15:09:48 -04:00
Bjorn Helgaas
b2972f8750 ACPI: remove acpi_device.flags.compatible_ids
We now keep a single list of IDs that includes both the _HID and any
_CIDs.  We no longer need to keep track of whether the device has a _CID.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25 15:09:47 -04:00
Bjorn Helgaas
7f47fa6c2f ACPI: maintain a single list of _HID and _CID IDs
There's no need to treat _HID and _CID differently.  Keeping them in
a single list makes code that uses the IDs a little simpler because it
can just traverse the list rather than checking "do we have a HID?",
"do we have any CIDs?"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25 15:09:31 -04:00
Bjorn Helgaas
402ac53614 ACPI: add acpi_bus_get_status_handle()
Add acpi_bus_get_status_handle() so we can get the status of a namespace
object before building a struct acpi_device.

This removes a use of "device->flags.dynamic_status", a cached indicator of
whether _STA exists.  It seems simpler and more reliable to just evaluate
_STA and catch AE_NOT_FOUND errors.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25 14:24:30 -04:00
Bjorn Helgaas
859ac9a4be ACPI: identify device tree root by null parent pointer, not ACPI_BUS_TYPE
We can identify the root of the ACPI device tree by the fact that it
has no parent.  This is simpler than passing around ACPI_BUS_TYPE_SYSTEM
and will help remove special treatment of the device tree root.

Currently, we add the root by hand with ACPI_BUS_TYPE_SYSTEM.  If we
traverse the tree treating the root as just another device and use
acpi_get_type(), the root shows up as ACPI_TYPE_DEVICE.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25 14:24:29 -04:00
Bjorn Helgaas
caaa6efb3d ACPI: save device_type in acpi_device
Most uses of the ACPI bus device_type (ACPI_BUS_TYPE_DEVICE,
ACPI_BUS_TYPE_POWER, etc) are during device initialization, but
we do need it later for notify handler installation, since that
is different for fixed hardware devices vs. namespace devices.

This patch saves the device_type in the acpi_device structure,
so we can check that rather than comparing against the _HID string.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25 14:24:25 -04:00
Linus Torvalds
94e0fb086f Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (57 commits)
  drm/i915: Handle ERESTARTSYS during page fault
  drm/i915: Warn before mmaping a purgeable buffer.
  drm/i915: Track purged state.
  drm/i915: Remove eviction debug spam
  drm/i915: Immediately discard any backing storage for uneeded objects
  drm/i915: Do not mis-classify clean objects as purgeable
  drm/i915: Whitespace correction for madv
  drm/i915: BUG_ON page refleak during unbind
  drm/i915: Search harder for a reusable object
  drm/i915: Clean up evict from list.
  drm/i915: Add tracepoints
  drm/i915: framebuffer compression for GM45+
  drm/i915: split display functions by chip type
  drm/i915: Skip the sanity checks if the current relocation is valid
  drm/i915: Check that the relocation points to within the target
  drm/i915: correct FBC update when pipe base update occurs
  drm/i915: blacklist Acer AspireOne lid status
  ACPI: make ACPI button funcs no-ops if not built in
  drm/i915: prevent FIFO calculation overflows on 32 bits with high dotclocks
  drm/i915: intel_display.c handle latency variable efficiently
  ...

Fix up trivial conflicts in drivers/gpu/drm/i915/{i915_dma.c|i915_drv.h}
2009-09-24 10:30:41 -07:00
Linus Torvalds
c11f6c8258 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (119 commits)
  ACPI: don't pass handle for fixed hardware notifications
  ACPI: remove null pointer checks in deferred execution path
  ACPI: simplify deferred execution path
  acerhdf: additional BIOS versions
  acerhdf: convert to dev_pm_ops
  acerhdf: fix fan control for AOA150 model
  thermal: add missing Kconfig dependency
  acpi: switch /proc/acpi/{debug_layer,debug_level} to seq_file
  hp-wmi: fix rfkill memory leak on unload
  ACPI: remove unnecessary #ifdef CONFIG_DMI
  ACPI: linux/acpi.h should not include linux/dmi.h
  hwmon driver for ACPI 4.0 power meters
  topstar-laptop: add new driver for hotkeys support on Topstar N01
  thinkpad_acpi: fix rfkill memory leak on unload
  thinkpad-acpi: report brightness events when required
  thinkpad-acpi: don't poll by default any of the reserved hotkeys
  thinkpad-acpi: Fix procfs hotkey reset command
  thinkpad-acpi: deprecate hotkey_bios_mask
  thinkpad-acpi: hotkey poll fixes
  thinkpad-acpi: be more strict when detecting a ThinkPad
  ...
2009-09-23 09:32:11 -07:00
Anand Gadiyar
fd589a8f0a trivial: fix typo "to to" in multiple files
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:55 +02:00
Jaswinder Singh Rajput
b21495a03e includecheck fix: include/acpi, acpi_bus.h
fix the following 'make includecheck' warning:

  include/acpi/acpi_bus.h: linux/device.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247068058.4382.96.camel@ht.satnam>
Acked-by: Len Brown <len.brown@intel.com>
2009-09-20 16:02:39 +05:30
Len Brown
7ef0143e2f Merge branch 'preempt' into release 2009-09-19 02:10:27 -04:00
Len Brown
bf25400e88 Merge branch 'bugzilla-13620' into release 2009-09-19 02:09:37 -04:00
Len Brown
3b87bb640e Merge branch 'bjorn-start-stop-2.6.32' into release 2009-09-19 01:56:39 -04:00
Len Brown
985f38781d Merge branch 'acpica' into release 2009-09-19 01:45:22 -04:00
Len Brown
003d6a38ce Merge branch 'sfi-base' into release
Conflicts:
	drivers/acpi/power.c

Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-19 00:37:13 -04:00
Jesse Barnes
1a133e0c9d ACPI: make ACPI button funcs no-ops if not built in
Yakui pointed out that we don't properly no-op the ACPI button routines
if the button driver isn't built in.  This will cause problems if ACPI
is disabled, so provide stub functions in that case.

Reported-by: ykzhao <yakui.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-17 14:48:23 -07:00
Jesse Barnes
7e12715ecc ACPI button: provide lid status functions
Some drivers need to know when a lid event occurs and get the current
status.  This can be useful for when a platform firmware clobbers some
hardware state at lid time, and a driver needs to restore things when
the lid is opened again.

Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-10 16:09:11 -07:00
Rafael J. Wysocki
9b83ccd2f1 ACPI PM: Replace wakeup.prepared with reference counter
The wakeup.prepared flag is used for marking devices that have the
wake-up power already enabled, so that the wake-up power is not
enabled twice in a row for the same device.  This assumes, however,
that device wake-up power will only be enabled once, while the device
is being prepared for a system-wide sleep transition, and the second
attempt is made by acpi_enable_wakeup_device_prep().

With the upcoming PCI wake-up rework this assumption will not hold
any more for PCI bridges and the root bridge whose wake-up power
may be enabled as a result of wake-up enable propagation from other
devices (eg. add-on devices that are not associated with any GPEs).
Thus, there may be many attempts to enable wake-up power on a PCI
bridge or the root bridge during a system power state transition
and it's better to replace wakeup.prepared with a reference counter.

Reviewed-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 14:19:18 -07:00
Alex Chiang
76d56de57a ACPI: export acpi_pci_root and friends
We can simplify ACPI drivers if we can tell whether a handle is an
ACPI PCI root or not.

Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:29:22 -07:00
Bob Moore
c9766237af ACPICA: Update version to 20090903.
Version 20090903.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-08 22:28:34 -04:00
Alexey Starikovskiy
138d15692b ACPICA: Don't switch task then not allowed
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-29 14:41:27 -04:00
Len Brown
a192a9580b ACPI: Move definition of PREFIX from acpi_bus.h to internal..h
Linux/ACPI core files using internal.h all PREFIX "ACPI: ",
however, not all ACPI drivers use/want it -- and they
should not have to #undef PREFIX to define their own.

Add GPL commment to internal.h while we are there.

This does not change any actual console output,
asside from a whitespace fix.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28 19:57:27 -04:00
Bob Moore
49ae80c994 ACPICA: Update version to 20090730
Version 20090730.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28 19:40:39 -04:00
Bob Moore
1872bbc94b ACPICA: Fix typo for HEST ACPI table
Problem with the name of one of the subtables.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28 19:40:39 -04:00
Bob Moore
c276e38841 ACPICA: Update definitions for HEST table
Eliminate duplicated code in disassembler.
Shorten identifiers that were too long.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28 19:40:39 -04:00
Bob Moore
6e2d5ebd0d ACPICA: ACPI 4: Update headers for new and changed ACPI tables.
Add IVRS,MSCT,UEFI,WAET,WDAT.
Updated several existing tables for ACPI 4.0-related changes.
Added document references for all tables not defined in ACPI spec.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28 19:40:38 -04:00
Bob Moore
b24aad4443 ACPICA: Split large ACPI table header
Split out the non-acpi-defined ACPI tables into the existing
(but empty) actbl2.h file. Preparation for new ACPI 4.0 tables.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28 19:40:38 -04:00
Lin Ming
a5fe1a03f7 ACPICA: fix leak of acpi_os_validate_address
http://bugzilla.kernel.org/show_bug.cgi?id=13620

If the dynamic region is created and added to resource list over and over again,
it has the potential to be a memory leak by growing the list every time.

This patch fixes the memory leak, as below

1) add a new field "count" to struct acpi_res_list.

   When inserting, if the region(addr, len) is already in the resource
   list, we just increase "count", otherwise, the region is inserted
   with count=1.

   When deleting, the "count" is decreased, if it's decreased to 0,
   the region is deleted from the resource list.

   With "count", the region with same address and length can only be
   inserted to the resource list once, so prevent potential memory leak.

2) add a new function acpi_os_invalidate_address, which is called when
   region is deleted.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27 13:10:35 -04:00
Bob Moore
3ce804ed83 ACPICA: Update version to 20090625
Update version number.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27 10:17:21 -04:00
Bob Moore
eb2289ba1b ACPICA: ACPI 4.0: Changes for existing ACPI tables.
FACS: new flag and new OspmFlags field.
SRAT: x2APIC - add ClockDomain field to descriptor #2

Includes header and disassembler support.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27 10:17:21 -04:00
Bob Moore
8e4319c425 ACPICA: Fix several acpi_attach_data problems
Handler was never invoked. Now invoked if/when host node is deleted.
Data object was not automatically deleted when host node was deleted.
Interface to handler had an unused parameter, removed it.
ACPICA BZ 778.

http://acpica.org/bugzilla/show_bug.cgi?id=778

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27 10:17:19 -04:00
Lin Ming
6557a49a44 ACPICA: ACPI 4.0: Interpreter support for IPMI.
Adds support for IPMI which is similar to SMBus and uses a bi-directional data buffer.
ACPICA BZ 773.

http://acpica.org/bugzilla/show_bug.cgi?id=773

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27 10:17:18 -04:00
Bob Moore
15b8dd53f5 ACPICA: Major update for acpi_get_object_info external interface
Completed a major update for the acpi_get_object_info external interface.
Changes include:
 - Support for variable, unlimited length HID, UID, and CID strings
 - Support Processor objects the same as Devices (HID,UID,CID,ADR,STA, etc.)
 - Call the _SxW power methods on behalf of a device object
 - Determine if a device is a PCI root bridge
 - Change the ACPI_BUFFER parameter to ACPI_DEVICE_INFO.
These changes will require an update to all callers of this interface.
See the ACPICA Programmer Reference for details.

Also, update all invocations of acpi_get_object_info interface

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27 10:17:15 -04:00
Bob Moore
c6b5774caa ACPICA: Add 64-bit support to acpi_read and acpi_write
Needed by drivers for new ACPi tables.  Internal versions of
these functions still use 32-bit max transfers, in order to
minimize disruption and stack use for the standard ACPI registers
(FADT-based).

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27 10:17:14 -04:00
Bob Moore
f8d80cdf40 ACPICA: Remove duplicate extern declarations for public globals
Some were defined twice, causes a warning with gcc
-Wredundant-decls.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27 10:17:13 -04:00
Frans Pop
2a908002c7 ACPI processor: force throttling state when BIOS returns incorrect value
If the BIOS reports an invalid throttling state (which seems to be
fairly common after system boot), a reset is done to state T0.
Because of a check in acpi_processor_get_throttling_ptc(), the reset
never actually gets executed, which results in the error reoccurring
on every access of for example /proc/acpi/processor/CPU0/throttling.

Add a 'force' option to acpi_processor_set_throttling() to ensure
the reset really takes effect.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13389

This patch, together with the next one, fixes a regression introduced in
2.6.30, listed on the regression list. They have been available for 2.5
months now in bugzilla, but have not been picked up, despite various
reminders and without any reason given.

Google shows that numerous people are hitting this issue. The issue is in
itself relatively minor, but the bug in the code is clear.

The patches have been in all my kernels and today testing has shown that
throttling works correctly with the patches applied when the system
overheats (http://bugzilla.kernel.org/show_bug.cgi?id=13918#c14).

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-26 20:06:53 -07:00
Len Brown
7cb7f45c7f Revert "ACPICA: Remove obsolete acpi_os_validate_address interface"
This reverts commit f9ca058430.

which caused a regression:

http://bugzilla.kernel.org/show_bug.cgi?id=13620

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-07-27 18:42:38 -04:00
Bjorn Helgaas
dcf52fb71d ACPI: remove unused acpi_device_ops .stop method
No drivers use the .stop method, so remove it.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-25 12:16:33 -04:00
Len Brown
57599cc997 Merge branch 'bjorn-notify' into release
Conflicts:
	drivers/platform/x86/eeepc-laptop.c

Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24 01:22:20 -04:00
Len Brown
fbe8cddd2d Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', 'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release 2009-06-24 01:19:50 -04:00
Zhao Yakui
86e437f077 ACPI: Add the reference count to avoid unloading ACPI video bus twice
Sometimes both acpi video and i915 driver are compiled as modules.
And there exists the strict dependency between the two drivers.
The acpi video bus will be unloaded in course of unloading the i915 driver.
If we unload the acpi video driver, then the kernel oops will be triggered.

Add the reference count to avoid unloading the ACPI video bus twice.
The reference count should be checked before unregistering the acpi video bus.
If the reference count is already zero, it won't unregister it again.
And after the acpi video bus is already unregistered, the reference count
will be set to zero.

http://bugzilla.kernel.org/show_bug.cgi?id=13396

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-23 23:38:41 -04:00
Pallipadi, Venkatesh
7b768f07dc ACPI: pdc init related memory leak with physical CPU hotplug
arch_acpi_processor_cleanup_pdc() in x86 and ia64 results in memory allocated
for _PDC objects that is never freed and will cause memory leak in case of
physical CPU remove and add. Patch fixes the memory leak by freeing the
objects soon after _PDC is evaluated.

Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-20 00:50:52 -04:00