This reverts commit 7e86c0e685 ("do not
overwrite EEPROM on Xonar D2/D2X") because it did not actually help with
the problem.
More user reports show that the overwriting of the EEPROM is not
triggered by using this driver but by installing Linux, and that the
installation of any other operating system (even one without any CMI8788
driver) has the same effect. In other words, the presence of this
driver does not have any effect on the occurrence of the error. (So
far, the available evidence seems to point to a BIOS bug.)
Furthermore, it turns out that the EEPROM chip is protected against
stray write commands by the command format and by requiring a separate
write-enable command, so the error scenario in the previous commit (that
SPI writes can be misinterpreted as an EEPROM write command) is not even
theoretically possible.
The mixer control that was removed as a consequence of the previous
commit can only be partially emulated in userspace, which also means it
cannot be seen be the in-kernel OSS API emulation, so it is better to
revert that change.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALC268 can be configured as digital-only, e.g. for HDMI, on some
machines. Allow the parser to set up the digital-only mode.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixed a typo of || and &&.
As it's in a disabled code section, there is no behavior change, though.
Reported-by: Jörg-Volker Peetz <jvpeetz@web.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Force speaker pin config with model=hp-dv5 model for cases when bios
doesn't set it up properly. All reported hp laptops using model=hp-dv5
model have speaker at pin 0x0d with same config, so it's safe to add
this within hp-dv5 model.
Reference: alsa-devel mailing list thread on
http://mailman.alsa-project.org/pipermail/alsa-devel/2009-February/014390.html
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 32e176c14d.
That commit caused a regression with suspend on Thinkpad SL300.
Reference: kernel bug#12711
http://bugzilla.kernel.org/show_bug.cgi?id=12711
Tested-by: Alexandre Rostovtsev <tetromino@gmail.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added the support of multiple digital outputs via auto-probing for
Realtek ALC88x codecs. The multiple outputs are handled as slave
streams, so only one PCM stream (and the corresponding IEC958*
elements) is provided to control both digital outputs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added the helper function snd_hda_multi_out_dig_cleanup() to clean up
the digital outputs with multi setup. This call is needed in cases
the codec supports multiple digital outputs as slaves. Otherwise the
slave widgets aren't properly cleaned up.
For a single digital output (e.g. in patch_conexant.c), this call isn't
needed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Force model=auto for Acer AX1700-U3700A with ALC888 codec.
Since Acer devices are handlded as model=acer as default, the auto
parsing has to be specified explicitly.
(Maybe it's better rather to remove this default model=acer handling,
though.)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Change HP dv7 quirk: although reported to work with hp-m4 model
(https://bugzilla.novell.com/show_bug.cgi?id=445321), the original
report doesn't contain info about testing of internal microphone.
Recently I received a report about internal mic not working
(https://qa.mandriva.com/show_bug.cgi?id=44855#c193), this must be
related with the forced line in on pin 0x0e done with hp-m4 model. Thus
change the current quirk from STAC_HP_M4 to STAC_HP_DV5, later reported
to be fixed on a provided kernel with this change
(https://qa.mandriva.com/show_bug.cgi?id=44855#c196).
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the HP connector on X200 dock doesn't detect when a HP is connected
nor allows sound to be played using it. This patch fixes the problem by adding
a quirk for this specific model. It's possible that others have the same NID
(0x19) to report when dock HP is connected, but I don't have access to any.
Please Cc me in the reply since I'm not subscribed to alsa-devel@.
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add STAC_DELL_S14 quirk for new laptop series. Removed un-needed pins
in pin_nids for stac92hd83xxx. Also reorganized connection selection
code for the respective ports per quirk define.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS W5F needs the fixed codec-slots to probe to override the BIOS
problem.
Tested-by: Giovanni Moser Frainer <giovanni@redix.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some devices have broken BIOS and they don't set the codec probe-bit
properly after cleared by the driver. This makes the driver skipping
the necessary codec slots.
Since BIOS update isn't always easy, now the semantics of probe_mask
option is changed a bit. When it contains the bit 8 (0x100), the
lower bits are used to probe that slots regardless of codec-probe bits
returned by the hardware.
For example, probe_mask=0x103 will force to probe the codec slot #0
and #1.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After commit "ALSA: hda - Fix restore of pin configs at resume for
STAC/IDT codecs", the introduced stac_save_pin_cfgs function checks
already for pins == NULL case, saving then default pin configs from
machine with stac92xx_save_bios_config_regs. So we can remove the
extra checks when stac927x_brd_tbl[spec->board_config] == NULL.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The devices that have been newly added during reconfig must be
registered. Otherwise they won't be visible to user-space.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Detect multiple digital-out pins in snd_hda_parse_pin_defconfig().
The dig_out_pin and dig_out_type fields become arrays.
The codec parser still doesn't use this multiple pins detection, though.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We found that enabling/disabling HDMI audio pin out at stream start/stop
time will kill the leading 500ms or so sound samples. Avoid this by enabling
pin out once and for ever at module loading time.
The leading ~500ms audio samples will still be lost when switching from
X-channel playback to Y-channel playback where X != Y. However there's no
much we can do about it: the audio infoframe has to change and it looks like
either G45 or YAMAHA requires some time to switch the configuration.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The YAMAHA AV-X1800 requires audio infoframe to include speaker-channel
mapping to play >2 channel HDMI audio. In theory that mapping should be
derived from its speaker configurations contained in its ELD. However we
currently cannot get ELD in console before the KMS functionalities are ready.
This is a more or less general issue at least in the near future. As a
workaround, we propose to allow playback of mult-channel audio when ELD
is not available.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added the digital beep support for ALC268. It was missing in the
last patches.
However, ALC268 has a strange pin use for widget 0x1d, which could be
used as another purpose. So, the patch adds a check of the beep control
before creating the hook for input layer.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When checking for input amps on pins 0x0a, 0x0d and 0x0f, and
initializing them for 92hd71xxx codec models, we must skip nid 0x0f
for 4-port models too like with 5-port models, as it is unused
(nid 0x0f is vendor reserved in 4-port models).
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds a new sound quirk entry (model=ecs202) for an ecs motherboard
with IDT STAC9221 codec (1019:2950).
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use digital beep instead of analog pc-beep for AD codecs.
Create the beep mixer controls dynamically on demand.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the SPDIF pin as slave digital out to enable concurrent
HDMI/SPDIF outputs for ASUS M3A-H/HDMI with ALC1200 codec.
Tested-by: Thomas Schneider <nailstudio@gmx.net>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added the ADATOut nid to a slave digital outs struct to allow output
via the DigOut pin.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Don't use uneeded/wrong third parameter for stac92xx_parse_auto_config
in patch_stac92hd71bxx (no SPDIF in).
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Detect the number of connected ports and number of smuxes dynamically,
looking at pin configs, using new introduced functions
stac92hd71bxx_connected_ports and stac92hd71bxx_connected_smuxes. Also
use proper input mux configuration for 4port and 5port models.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current code for STAC92HD71Bx and STAC92HD75Bx doesn't consider pin
complexes 0x20 and 0x27. Also for 4 port models, nids 0x0e and 0x0f
are vendor reserved. This commit changes code so it'll consider the
additional pin complexes for models that have it, and avoid reserved
nids to be touched on 4 port models.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some fixes regarding snd-hda-intel workqueue:
- Use create_singlethread_workqueue() instead of create_workqueue()
as per-CPU work isn't required.
- Allocate workq name string properly
- Renamed the workq name to "hd-audio*" to be more obvious.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A digital beep generator can be used via input layer.
Signed-off-by: Kusanagi Kouichi <slash@ma.neweb.ne.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Realtek ALC262 on the Tyan Thunder n6650W (S2915-E) mainboard has a
rather odd configuration template. As a result, the white AUX connector
can not be used. This rewrites the default config to more accurately
reflect the connector layout, colour and function.
Unfortunately the black CD_IN connector, which is suspected to be widget
0x1c refuses to switch into input (0x20), instead opting to remain on 0x0.
As such, no mixer controls are exposed for it. Autoswitching is implemented
between the front headphone output and back line output.
Signed-off-by: Tony Vroon <tony@linx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MIDI_TX IRQ seems always pending when any bytes on FIFO is available.
Thus, it's better to enable MPU_TX only when any bytres are really
stored in the substream, and disables immediately when the queue
becomes empty.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Volume-knob widgets have no widget selection although they have widget
connections. Thus, the connection list in the proc output shouldn't
contain the selection (*).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With a postfix decrement time will reach -1 rather than 0,
so the warning will not be issued.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the case of having a selector instead of mixer while initing input
sources, the case that happens with ALC889, we must select instead
of muting input. Problem was found while testing with hda-emu.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While debugging some code paths in AC97 codec patches and its suspend
and resume functions, getting to know the flags has proved useful to
follow those code paths.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently code for capture source support in ALC889 only considers
capture mixers. This change adds additional support for ADC+selector
present in ALC889, taking into account also the presence of an
additional DMIC connection item in the selector.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Check in a quirk list if it should do cold reset when AC97 power saving
is enabled. Some devices do not resume properly when cold reset,
although power saving works OK.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add another MacBook Pro 4,1 SSID (106b:3800). It seems that latter revisions,
(at least mine), have different IDs to earlier revisions.
Signed-off-by: Luke Yelavich <themuso@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some revisions of the 92hd71xxx codec families don't have input amps
on ports 0xa, 0xd and 0xf, so probe the widget caps on port 0xa and
check for support, if found run snd_hda_sequence_write_cache() on the
stac92hd71xxx_unmute_core_init verb list.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- add support for gpio ports (2 GPI, 2 GPO) of pcxhr stereo cards
- minor bugfixes : allow setting clock to internal by the mixer
even if there is no stream (but monitoring)
Signed-off-by: Markus Bollinger <bollinger@digigram.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mic-boosts (0x14 and 0x15) on AD1884* codecs are input-amps,
not output-amps. Fix the invalid initialization verbs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of fixed kcontrol_new element, build "Input Source" controls
dynamically. If the number of input-source items is 0 or 1, we don't
need to create such a control.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The reference NID for the analog outputs of STAC/IDT codecs is set
to a fixed number 0x02. But this isn't always correct and in many
codecs it points to a non-existing NID.
This patch fixes the initialization of the PCM reference NID taken
from the actually probed DAC list.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add another LanParty reference board SND_PCI_QUIRK to quirk lists of
all codec families.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some revisions of the 92hd8xxx codec's not supporting port power
downs in which the using of it causes capture and also randomly
playback streams to not function at all. Thus by disabling it by
default and adding a option to enable it manually will fix all issue
on current and future revisions.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Port 0xe power mapping was incorrect set to 0x80 changed to the correct
value 0x40.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Gateway T1616 laptop needs EAPD always on while the current STAC9205
code turns off per HP plug. Added a new model "eapd" to keep it on.
Reference: Novell bnc#467597
https://bugzilla.novell.com/show_bug.cgi?id=467597
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Check the present pin control bit and avoid the write if it's already
set in patch_sigmatel.c. This will reduce the number of verb execs at
jack plugging.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On the 92hd8xxx codecs port 0xe needs the connection selected to be the
last DAC in the list.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some laptops like VAIO have multiple codecs and uses ALC262 only for
the SPIDF output without analog I/O. So far, the codec-parser assumes
the presence of analog I/O and returned an error for such a case.
This patch adds some hacks to allow the digital-only configuration for
ALC262.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Assign the proper PCM digital I/O type (HDA_PCM_TYPE_*) for the digital
I/O on STAC/IDT codecs. HDA_PCM_TYPE_HDMI is assigned for the HDMI I/O.
A similar framework is implemented to patch_realtek.c, but it's not
set up and still using only HDA_PCM_TYPE_SPDIF yet.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add dig_out_type and dig_in_type fields to autocfg struct.
A proper HDA_PCM_TYPE_* value is assigned to these fields according
to the pin-jack location type value.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Don't break the loop in snd_hda_codec_build_pcms() even if the item
has no substreams.
It's possible that it's an empty item and the next item containing
the valid substreams (e.g. realtek codecs may create the analog
and alt-analog but no digitl streams).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
STAC/IDT codecs have often too large volume scales such as -96dB,
and exposing this as is results in too large scale in percentage
representation.
This patch adds the check of the volume scale and halves the
volume range if it's too large automatically.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added the volume offset to base for the standard volume controls
to handle elements with too big volume scales like -96dB..0dB.
For such elements, you can set the base volume to reduce the range.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mention in the Kconfig help text that the HDAV1.3 code is rather
experimental.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This hardware has a better chance of working correctly if we don't
forget to enable it.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixed invalid power mappings for ports 0xd and 0xe on 93hd83xxx codecs.
They were shifted right one too many bits.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the 82801H variants 1071:8227 and 8086:2503 to use ALC883_MITAC
Reference: Ubuntu bug 210865
https://bugs.launchpad.net/bugs/210865
Signed-off-by: Luke Yelavich <themuso@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The codec-parsing of STAC925x was utterly broken due to its unique
design unlike other STAC codecs. It has a volume control only in NID
0x0e (similar as STAC9200), but the parser assumes that the amp is
available on each DAC widget.
The patch fixes the whole wrong stories: fix the initial volume,
assign the fixed "Master" volume, and avoid to create wrong volume
controls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The value set in the commit 2465fb6605
is actually wrong. The value range is from 0 to 0x1f while the patch
sets to 0x7f. Let's fix it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On the Asus Xonar D2 and D2X models, the SPI chip select signal for the
fourth DAC shares its pin with the serial clock for the EEPROM that
contains the PCI subdevice ID values. It appears that when DAC
registers are written and some other unknown conditions occur (probably
noise on the EEPROM's chip select line), the EEPROM gets overwritten
with garbage, which makes it impossible to properly detect the card
later.
Therefore, we better avoid DAC register writes and make sure that the
driver works with the DAC's registers' default values. Consequently,
the sample format is now I2S instead of left-justified (no user-visible
change), and the DAC's volume/mute registers cannot be used anymore
(volume changes are now done by the software volume plugin).
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The selector widget 0x0e isn't initialized properly in the whole probe
process, thus it can be a wrong value depending on the BIOS setup.
This patch adds the init verb to set it to the max & unmuted.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the bug introduced in commit c15c5060fc:
sound/pci/hda/patch_sigmatel.c: In function ‘patch_stac92hd83xxx’:
sound/pci/hda/patch_sigmatel.c:4765: warning: assignment from incompatible pointer type
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Resetting HP pinctl at the unplugged state may cause a sort of regression
on some devices because of their wrong pin configuration.
A simple workaround is to disable the pin reset. This is ugly and may be
not good from the power-saving POV (if any), but damn simple.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org
Added amp nid for stac92hd8xxx families of codecs so the input amp
mixer is created.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CF-74 does the headphone/speaker switching on hardware, thus the driver
shouldn't do any software-toggling of pins. Otherwise it results in a
silent headphone output.
This patch simply resets the hp_detect flag to fix the problem.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd-hda-intel driver used schedule_work() fot the delayed DMA pointer
updates, but this has several potential problems:
- it may block other eventsd works longer
- it may deadlock when probing fails and flush_scheduled_work() is
called during probe callback (as probe callback itself could be
invoked from eventd)
This patch adds an own workq for each driver instance to solve these
problems.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Intel DX58SO board works fine with model ALC883_3ST_6ch_INTEL.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the following lockdep warning by not reusing the hda_codec.spdif_mutex.
ALSA sound/pci/hda/hda_codec.c:882: hda_codec_cleanup_stream: NID=0x2
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.28-next-20090102 #33
-------------------------------------------------------
mplayer/3151 is trying to acquire lock:
(&pcm->open_mutex){--..}, at: [<ffffffffa004ced3>] snd_pcm_release+0x43/0xd0 [snd_pcm]
but task is already holding lock:
(&mm->mmap_sem){----}, at: [<ffffffff810c0252>] sys_munmap+0x42/0x80
which lock already depends on the new lock.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a patch which adds correct auto detection of model for
snd-hda-intel for Acer Aspire 5930G and 6930G. Tested on my 5930G. It
finally adds hp jack sense and 5.1 speaker system sliders.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix trivial name string typo as reported in bug 2552.
Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added functions to report jack sense.
As CXT5051_PORTB_EVENT has the same value as CONEXANT_MIC_EVENT two input
devices for the microphone will be created if using CXT5051.
Signed-off-by: Ulrich Dangel <uli@spamt.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move the more specific preset for ALC1200 above the general one for
ALC888, so that it will have the chance to get matched and selected.
Reported-by: Thomas Schneider <nailstudio@gmx.net>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add check to determine if dinput_mux is set by any of patch_stac*() functions,
otherwise a invalid pointer my be referenced causing gibberish to mixer values.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The capture with 44.1kHz on ca0106 seems to cause loud noises on
later playbacks, which doesn't support 44.1kHz. A simple fix is to
disable 44.1kHz, as the "default" PCM with dsnoop is anyway only with
48kHz.
Reference: Novell bnc#447624
https://bugzilla.novell.com/show_bug.cgi?id=447624
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When no jack detection is available, the pins should be always
turned on since it can't be turned on/off dynamically via unsol
events.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added probe_only module option to hd-audio driver.
This option specifies whether the driver creates and initializes the
codec-parser after probing. When this option is set, the driver skips
the codec parsing and initialization but gives you proc and other
accesses. It's useful to see the initial codec state for debugging.
The default of this value is off, so the default behavior is as same
as before.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the line_out has only one DAC and it's unique (i.e. not shared
by other outputs), assign a more reasonable and distinct mixer name
such as "Headphone" or "Speaker".
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current auto-configuration code has several problems especially
for the new IDT codecs, e.g. wrong assignment of pins and DACs or
coupled volume for speaker and headphone.
This patch is a fairly large rewrite of the auto-configuration code.
Some remaks
- mic_switch and line_switch contain NIDs instead of bool
- dac_list isn't fixed for IDT 92HD* codecs now, they are all probed
- extra HP and speakers are stored in extra_dacs[].
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous commit re-enabled hp_nid setup for IDT92HD73*, but
it's unneeded indeed for Dell laptops that have multiple headphones.
Setting the extra hp_nid results in a non-working "Headpohne" mixer
control. Thus hp_nid should be 0 for these dell models.
Also, the automatic addition of hp_nid should check whether it's
a dual-HP model or not. For dual-HPs, the pins are already checked
by the early workaround.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added "IEC958 PCM Stream" controls for the per-stream IEC958 status
bits. Using this instead of "IEC958 Default" is safer since the status
bits will be recovered to the default states after closing the PCM
stream.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixed the call of snd_ctl_add() by replacing with snd_hda_ctl_add()
so that this mixer element can be tracked for re-configuration.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The re-initializations of codec amp and verb caches are missing
at reconfig, which may cause Oops occasionally.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added the model without the jack-detection for some desktops that
have really no jack-detection. The recent driver caused regressions
regarding the sound output on such machines.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 07f455f779.
ALSA: hda: removed unneeded hp_nid references
Removed unneeded hp_nid references for 92hd73xx codec family.
This caused the silent output on some Intel desktops due to missing
routing of widget 0x0a and 0x0d.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace all tasklet_hi_schedule() callers with the normal
tasklet_schedule(). The former often causes troubles with
RT-kernels, and has actually no merit.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove codec vendor names from the codec name strings.
The vendor name is already given from the vendor name table, so
displayed doubly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some desktops seems to have no HP/mic jack detection on the front panel,
which results in the silent output in the recent driver, because the
driver mutes the output (to save power) when no plug is detected.
This patch adds a new model that disables the jack-detection.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch removes an inconsistency that became apparent when I
documented the fields of snd_ca0106_details. spi_dac is always
used in a 'boolean' sense, so this cleanup should make no difference.
[Actually, there is one place checking explicitly spi_dac == 1, so
this will change the behavior. But, supposing it's rather a typo,
I apply this clean-up patch -- tiwai]
Signed-off-by: Ben Stanley <Ben.Stanley@exemail.com.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi wrote an email [1] explaining the fields of snd_ca0106_details,
so I captured the information into the ca0106.h header file.
[1] http://article.gmane.org/gmane.linux.alsa.devel/56783/match=takashi+gpio_type
Signed-off-by: Ben Stanley <Ben.Stanley@exemail.com.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixed the compile warning regarding the unused function when built
with CONFIG_PM=n:
sound/pci/hda/hda_intel.c:1905: warning: ‘snd_hda_codecs_inuse’ defined but not used
snd_hda_codecs_inuse() is used only in the resume callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The GPIO stuff for OLPC in cs5535audio_olpc.c is implemented only for
Geode-LX, and enabled only when CONFIG_MGEODE_LX=y. Without this
config option, the driver gets build errors.
This patch adds a workaround to make it dependent on CONFIG_MGEODE_LX.
Ideally, the OLPC-GPIO stuff should be implemented in a way
independent from CPU type selection...
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- add copyright info to _olpc.c
- minor layout fixes
- make Makefile more concise
- silence a warning
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Always turn off mic bias; the MIC LED should never come on when the
driver is first loaded.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This drops the AD1888 V_REFOUT control, and replaces it with a MIC Bias
Enable control. It also moves the MIC bias enabling into a separate
function.
Signed-off-by: Andres Salomon <dilinger@debian.org>
The OLPC has a privacy light hooked up in series with the microphone's
V_Ref bias. We want to activate the bias while we are capturing audio.
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Checking the HPF register is irrelevant; HPF is secondary to the AI mode.
Instead, check for Analog Input mode via GPIO.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Previously, we had two separate controls; there's no need to have AD1888's
HPF control, so drop it if we're on an OLPC machine. Also, as per Arjun's
request, rename OLPC's Analog Input Switch control to "DC Mode Enable".
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We shouldn't be touching V_REFOUT when we toggle HPF/analog input, so just
drop that code.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix an audible pop described in <http://dev.laptop.org/ticket/977>. Originally
based upon fixes by Mitch Bradley and Chris Ball.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Use basic infrastructure code; geode_gpio* (rather than indexed i/o
EC access), and do an OLPC machine check in olpc_quirk.
[dilinger@debian.org: don't return failure in olpc_quirks if !OLPC]
[dilinger@debian.org: drop the <B2 workarounds; those machines are EOL'd]
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
This is a 2nd cut at adding support for OLPC analog input.
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
snd_cs5535audio_suspend and snd_cs5535audio_resume are only defined when
CONFIG_PM is set; make that clear in the header file.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As per <http://dev.laptop.org/ticket/1420>, we need to properly turn off
the PCM if we're closing the device in order to save power. This also
causes the MIC led to turn off properly.
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We'd like to use the High Pass Filter and V_REFOUT bitshift values elsewhere,
so stick them into a ac97_codec.h.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The return value of pci_enable_device() must be checked even in resume
callback:
sound/pci/ca0106/ca0106_main.c:1779: warning: ignoring return value of ‘pci_enable_device’, declared with attribute warn_unused_result
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move the restoration of the standard PCI configuration registers
in the snd_hda_intel driver to a ->resume_early() callback executed
with interrupts disabled, since doing that with interrupts enabled
may lead to problems in some cases.
This patch addresses the regression from 2.6.26 tracked as
http://bugzilla.kernel.org/show_bug.cgi?id=12121 .
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current code overrides the event type on input pins always to
PWR_EVENT. Although this still works (PWR_EVENT and INSERT_EVENT
are handled samely), it'd be better to avoid such overrides.
Also, currently the unsol events are registered even for fixed pins
which will never raise the pin-detection event.
This patch fixes both issues.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pin-detection function used in patch_sigmatel.c shouldn't be specific
to HP pin because it's used for input pins in general, too.
This patch fixes the detection function, removes the HP check from it
and moves to stac92xx_hp_detect().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reduce the command timeout to 0.5sec. Should be enough to allow a
working command interface but removes a RCU stall and slow resume on
some revisions where the AC97 revision detection stalls in resume.
Signed-off-by: Peter Gruber <nokos@gmx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Due to the conversion (drop) from 24bit in the DSP to 16bit in AC97,
the maximum capture level on Audigy seems lower than it could be.
This patch adds a workaround to enable the artificial capture boost
switch. When this switch is on, the whole analog capature level is
boost up. However, this results in the lower capture resolution.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The WM9715 is software compatible with the WM9711 and WM9712.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- compatibility issue : change firmware filenames
the pcxhr driver version <= 1.0.18a does not work
with new firmware > 1.0.17. Keep the old firmware files
and add new firmware files with different names
Signed-off-by: Markus Bollinger <bollinger@digigram.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The power-state changes in patch_sigmatel.c are accessed via *_cached()
but they shouldn't be really cached. Fixed to the normal write.
Also, stac92hd71xx_suspend and resume are no longer necessary as the
power-state changes are handled properly in the common routine.
Removed these hacks now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The amp switch of SPDIF outputs have to be cached in the amp cache
instead of codec cache. Otherwise it conflicts with the IEC958
playback switch control in hda_codec.c.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
