Commit Graph

143 Commits

Author SHA1 Message Date
Linus Torvalds
e16b396ce3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
  doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
  Update cpuset info & webiste for cgroups
  dcdbas: force SMI to happen when expected
  arch/arm/Kconfig: remove one to many l's in the word.
  asm-generic/user.h: Fix spelling in comment
  drm: fix printk typo 'sracth'
  Remove one to many n's in a word
  Documentation/filesystems/romfs.txt: fixing link to genromfs
  drivers:scsi Change printk typo initate -> initiate
  serial, pch uart: Remove duplicate inclusion of linux/pci.h header
  fs/eventpoll.c: fix spelling
  mm: Fix out-of-date comments which refers non-existent functions
  drm: Fix printk typo 'failled'
  coh901318.c: Change initate to initiate.
  mbox-db5500.c Change initate to initiate.
  edac: correct i82975x error-info reported
  edac: correct i82975x mci initialisation
  edac: correct commented info
  fs: update comments to point correct document
  target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
  ...

Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-18 10:37:40 -07:00
Linus Torvalds
0a95d92c00 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (62 commits)
  powerpc/85xx: Fix signedness bug in cache-sram
  powerpc/fsl: 85xx: document cache sram bindings
  powerpc/fsl: define binding for fsl mpic interrupt controllers
  powerpc/fsl_msi: Handle msi-available-ranges better
  drivers/serial/ucc_uart.c: Add of_node_put to avoid memory leak
  powerpc/85xx: Fix SPE float to integer conversion failure
  powerpc/85xx: Update sata controller compatible for p1022ds board
  ATA: Add FSL sata v2 controller support
  powerpc/mpc8xxx_gpio: simplify searching for 'fsl, qoriq-gpio' compatiable
  powerpc/8xx: remove obsolete mgsuvd board
  powerpc/82xx: rename and update mgcoge board support
  powerpc/83xx: rename and update kmeter1
  powerpc/85xx: Workaroudn e500 CPU erratum A005
  powerpc/fsl_pci: Add support for FSL PCIe controllers v2.x
  powerpc/85xx: Fix writing to spin table 'cpu-release-addr' on ppc64e
  powerpc/pseries: Disable MSI using new interface if possible
  powerpc: Enable GENERIC_HARDIRQS_NO_DEPRECATED.
  powerpc: core irq_data conversion.
  powerpc: sysdev/xilinx_intc irq_data conversion.
  powerpc: sysdev/uic irq_data conversion.
  ...

Fix up conflicts in arch/powerpc/sysdev/fsl_msi.c (due to getting rid of
of_platform_driver in arch/powerpc)
2011-03-18 06:31:43 -07:00
Linus Torvalds
6899608533 Merge branch 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msm
* 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msm: (46 commits)
  msm: scm: Check for interruption immediately
  msm: scm: Fix improper register assignment
  msm: scm: Mark inline asm as volatile
  msm: iommu: Enable HTW L2 redirection on MSM8960
  msm: iommu: Don't read from write-only registers
  msm: iommu: Remove dependency on IDR
  msm: iommu: Use ASID tagging instead of VMID tagging
  msm: iommu: Rework clock logic and add IOMMU bus clock control
  msm: iommu: Clock control for the IOMMU driver
  msm: mdp: Set the correct pack pattern for XRGB/ARGB
  msm_fb: Fix framebuffer console
  msm: mdp: Add support for RGBX 8888 image format.
  video: msmfb: Put the partial update magic value into the fix_screen struct.
  msm: clock: Migrate to clkdev
  msm: clock: Remove references to clk_ops_pcom
  msm: headsmp.S: Fix section mismatch
  msm: Use explicit GPLv2 licenses
  msm: iommu: Enable IOMMU support for MSM8960
  msm: iommu: Generalize platform data for multiple targets
  msm: iommu: Create a Kconfig item for the IOMMU driver
  ...
2011-03-17 19:13:18 -07:00
Linus Torvalds
411f5c7a50 Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits)
  davinci: DM644x EVM: register MUSB device earlier
  davinci: add spi devices on tnetv107x evm
  davinci: add ssp config for tnetv107x evm board
  davinci: add tnetv107x ssp platform device
  spi: add ti-ssp spi master driver
  mfd: add driver for sequencer serial port
  ARM: EXYNOS4: Implement Clock gating for System MMU
  ARM: EXYNOS4: Enhancement of System MMU driver
  ARM: EXYNOS4: Add support for gpio interrupts
  ARM: S5P: Add function to register gpio interrupt bank data
  ARM: S5P: Cleanup S5P gpio interrupt code
  ARM: EXYNOS4: Add missing GPYx banks
  ARM: S3C64XX: Fix section mismatch from cpufreq init
  ARM: EXYNOS4: Add keypad device to the SMDKV310
  ARM: EXYNOS4: Update clocks for keypad
  ARM: EXYNOS4: Update keypad base address
  ARM: EXYNOS4: Add keypad device helpers
  ARM: EXYNOS4: Add support for SATA on ARMLEX4210
  plat-nomadik: make GPIO interrupts work with cpuidle ApSleep
  mach-u300: define a dummy filter function for coh901318
  ...

Fix up various conflicts in
 - arch/arm/mach-exynos4/cpufreq.c
 - arch/arm/mach-mxs/gpio.c
 - drivers/net/Kconfig
 - drivers/tty/serial/Kconfig
 - drivers/tty/serial/Makefile
 - drivers/usb/gadget/fsl_mxc_udc.c
 - drivers/video/Kconfig
2011-03-17 19:08:06 -07:00
Linus Torvalds
6d7ed21d17 Merge branches 'defcfg', 'drivers' and 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'defcfg' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6647/1: add Versatile Express defconfig
  ARM: 6644/1: mach-ux500: update the U8500 defconfig

* 'drivers' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6764/1: pl011: factor out FIFO to TTY code
  ARM: 6763/1: pl011: add optional RX DMA to PL011 v2
  ARM: 6758/1: amba: support pm ops
  ARM: amba: make amba_driver id_table const
  ARM: amba: make internal ID table handling const
  ARM: amba: make probe() functions take const id tables
  ARM: 6662/1: amba: make amba_bustype non-static
  ARM: mmci: add dmaengine-based DMA support
  ARM: mmci: no need for separate host->data_xfered
  ARM: mmci: avoid unnecessary switch to data available PIO interrupts
  ARM: mmci: no need to call flush_dcache_page() with sg_miter API
  ARM: mmci: avoid reporting too many completed bytes on fifo overrun
  ALSA: AACI: make fifo variables more explanitory
  ALSA: AACI: no need to call snd_pcm_period_elapsed() for each period
  ALSA: AACI: use snd_pcm_lib_period_bytes()
  ALSA: AACI: clean up AACI announcement printk
  ALSA: AACI: fix channel mask selection
  ALSA: AACI: fix number of channels for record
  ALSA: AACI: fix multiple IRQ claiming

* 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm:
  VIDEO: cyberpro: remove unused cyber2000fb_get_fb_var()
  VIDEO: cyberpro: remove useless function extreg pointers
  VIDEO: cyberpro: update handling of device structures
  VIDEO: cyberpro: add support for video capture I2C
  VIDEO: cyberpro: make 'reg_b0_lock' always present
  VIDEO: cyberpro: add I2C support
  VIDEO: cyberpro: select lowest multipler/divisor for PLL
2011-03-17 18:48:35 -07:00
Linus Torvalds
514af9f790 Merge branches 'stable/hvc-console', 'stable/gntalloc.v6' and 'stable/balloon' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/hvc-console' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/hvc: Disable probe_irq_on/off from poking the hvc-console IRQ line.

* 'stable/gntalloc.v6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: gntdev: fix build warning
  xen/p2m/m2p/gnttab: do not add failed grant maps to m2p override
  xen-gntdev: Add cast to pointer
  xen-gntdev: Fix incorrect use of zero handle
  xen: change xen/[gntdev/gntalloc] to default m
  xen-gntdev: prevent using UNMAP_NOTIFY_CLEAR_BYTE on read-only mappings
  xen-gntdev: Avoid double-mapping memory
  xen-gntdev: Avoid unmapping ranges twice
  xen-gntdev: Use map->vma for checking map validity
  xen-gntdev: Fix unmap notify on PV domains
  xen-gntdev: Fix memory leak when mmap fails
  xen/gntalloc,gntdev: Add unmap notify ioctl
  xen-gntalloc: Userspace grant allocation driver
  xen-gntdev: Support mapping in HVM domains
  xen-gntdev: Add reference counting to maps
  xen-gntdev: Use find_vma rather than iterating our vma list manually
  xen-gntdev: Change page limit to be global instead of per-open

* 'stable/balloon' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (24 commits)
  xen-gntdev: Use ballooned pages for grant mappings
  xen-balloon: Add interface to retrieve ballooned pages
  xen-balloon: Move core balloon functionality out of module
  xen/balloon: Remove pr_info's and don't alter retry_count
  xen/balloon: Protect against CPU exhaust by event/x process
  xen/balloon: Migration from mod_timer() to schedule_delayed_work()
  xen/balloon: Removal of driver_pages
2011-03-17 18:16:36 -07:00
Russell King
9c9585e0e9 Merge branches 'aaci', 'mmci-dma', 'pl' and 'pl011' into drivers 2011-03-17 11:04:51 +00:00
Paul Mundt
1d2a1959fe Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh-latest 2011-03-17 16:44:08 +09:00
David Brown
92c260f755 Merge remote branch 'rmk/for-linus' into for-linus
* rmk/for-linus: (1557 commits)
  ARM: 6806/1: irq: introduce entry and exit functions for chained handlers
  ARM: 6781/1: Thumb-2: Work around buggy Thumb-2 short branch relocations in gas
  ARM: 6747/1: P2V: Thumb2 support
  ARM: 6798/1: aout-core: zero thread debug registers in a.out core dump
  ARM: 6796/1: Footbridge: Fix I/O mappings for NOMMU mode
  ARM: 6784/1: errata: no automatic Store Buffer drain on Cortex-A9
  ARM: 6772/1: errata: possible fault MMU translations following an ASID switch
  ARM: 6776/1: mach-ux500: activate fix for errata 753970
  ARM: 6794/1: SPEAr: Append UL to device address macros.
  ARM: 6793/1: SPEAr: Remove unused *_SIZE macros from spear*.h files
  ARM: 6792/1: SPEAr: Replace SIZE macro's with SZ_4K macros
  ARM: 6791/1: SPEAr3xx: Declare device structures after shirq code
  ARM: 6790/1: SPEAr: Clock Framework: Rename usbd clock and align apb_clk entry
  ARM: 6789/1: SPEAr3xx: Rename sdio to sdhci
  ARM: 6788/1: SPEAr: Include mach/hardware.h instead of mach/spear.h
  ARM: 6787/1: SPEAr: Reorder #includes in .h & .c files.
  ARM: 6681/1: SPEAr: add debugfs support to clk API
  ARM: 6703/1: SPEAr: update clk API support
  ARM: 6679/1: SPEAr: make clk API functions more generic
  ARM: 6737/1: SPEAr: formalized timer support
  ...

Conflicts:
	arch/arm/mach-msm/board-msm7x27.c
	arch/arm/mach-msm/board-msm7x30.c
	arch/arm/mach-msm/board-qsd8x50.c
	arch/arm/mach-msm/board-sapphire.c
	arch/arm/mach-msm/include/mach/memory.h
2011-03-16 22:13:16 -07:00
Linus Torvalds
63a93699c6 Merge branch 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6629/2: aaec2000: remove support for mach-aaec2000
  ARM: lh7a40x: remove unmaintained platform support

Fix up trivial conflicts in
 - arch/arm/mach-{aaec2000,lh7a40x}/include/mach/memory.h (removed)
 - drivers/usb/gadget/Kconfig (USB_[GADGET_]LH7A40X removed, others added)
2011-03-16 19:05:40 -07:00
Linus Torvalds
4c5811bf46 Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits)
  tty: serial: altera_jtaguart: Add device tree support
  tty: serial: altera_uart: Add devicetree support
  dt: eliminate of_platform_driver shim code
  dt: Eliminate of_platform_{,un}register_driver
  dt/serial: Eliminate users of of_platform_{,un}register_driver
  dt/usb: Eliminate users of of_platform_{,un}register_driver
  dt/video: Eliminate users of of_platform_{,un}register_driver
  dt/net: Eliminate users of of_platform_{,un}register_driver
  dt/sound: Eliminate users of of_platform_{,un}register_driver
  dt/spi: Eliminate users of of_platform_{,un}register_driver
  dt: uartlite: merge platform and of_platform driver bindings
  dt: xilinx_hwicap: merge platform and of_platform driver bindings
  ipmi: convert OF driver to platform driver
  leds/leds-gpio: merge platform_driver with of_platform_driver
  dt/sparc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: move of_bus_type infrastructure to ibmebus
  drivercore/dt: add a match table pointer to struct device
  dt: Typo fix.
  altera_ps2: Add devicetree support
  ...
2011-03-16 17:28:10 -07:00
Linus Torvalds
f74b944419 Merge branch 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  BKL: That's all, folks
  fs/locks.c: Remove stale FIXME left over from BKL conversion
  ipx: remove the BKL
  appletalk: remove the BKL
  x25: remove the BKL
  ufs: remove the BKL
  hpfs: remove the BKL
  drivers: remove extraneous includes of smp_lock.h
  tracing: don't trace the BKL
  adfs: remove the big kernel lock
2011-03-16 17:21:00 -07:00
Linus Torvalds
e6bee325e4 Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits)
  pch_uart: reference clock on CM-iTC
  pch_phub: add new device ML7213
  n_gsm: fix UIH control byte : P bit should be 0
  n_gsm: add a documentation
  serial: msm_serial_hs: Add MSM high speed UART driver
  tty_audit: fix tty_audit_add_data live lock on audit disabled
  tty: move cd1865.h to drivers/staging/tty/
  Staging: tty: fix build with epca.c driver
  pcmcia: synclink_cs: fix prototype for mgslpc_ioctl()
  Staging: generic_serial: fix double locking bug
  nozomi: don't use flush_scheduled_work()
  tty/serial: Relax the device_type restriction from of_serial
  MAINTAINERS: Update HVC file patterns
  tty: phase out of ioctl file pointer for tty3270 as well
  tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile
  pch_uart: Fix DMA channel miss-setting issue.
  pch_uart: fix exclusive access issue
  pch_uart: fix auto flow control miss-setting issue
  pch_uart: fix uart clock setting issue
  pch_uart : Use dev_xxx not pr_xxx
  ...

Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied
twice, then changes to the same area in one branch)
2011-03-16 15:11:04 -07:00
Julia Lawall
48a10cdfc0 drivers/serial/ucc_uart.c: Add of_node_put to avoid memory leak
Add a call to of_node_put in the error handling code following a call to
of_find_compatible_node or of_find_node_by_type.

This patch also substantially reorganizes the error handling code in the
function, to that it is possible first to jump to code that frees qe_port
and then to jump to code that also puts np.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
local idexpression x;
expression E,E1,E2;
statement S;
@@

*x =
(of_find_node_by_path
|of_find_node_by_name
|of_find_node_by_phandle
|of_get_parent
|of_get_next_parent
|of_get_next_child
|of_find_compatible_node
|of_match_node
|of_find_node_by_type
|of_find_node_with_property
|of_find_matching_node
|of_parse_phandle
)(...);
...
if (x == NULL) S
<... when != x = E
*if (...) {
  ... when != of_node_put(x)
      when != if (...) { ... of_node_put(x); ... }
(
  return <+...x...+>;
|
*  return ...;
)
}
...>
(
E2 = x;
|
of_node_put(x);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Timur Tabi <timur@freescale.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-03-15 13:48:16 -05:00
Russell King
9ced9f03d1 Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable
Conflicts:
	arch/arm/mm/Kconfig
2011-03-15 16:32:47 +00:00
Denis Turischev
6ae705b23b pch_uart: reference clock on CM-iTC
Default clock source for UARTs on Topcliff is external UART_CLK.
On CM-iTC USB_48MHz is used instead. After VCO2PLL and DIV
manipulations UARTs will receive 192 MHz.
Clock manipulations on Topcliff are controlled in pch_phub.c

v2: redone against the linux-next tree
v3: redone against linux/kernel/git/next/linux-next.git snapshot

Signed-off-by: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-14 16:24:23 -07:00
Russell King
8688a1a863 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-tcc into devel-stable 2011-03-12 20:33:51 +00:00
Kukjin Kim
f4612798a1 Merge branch 'next-exynos4' into for-next 2011-03-11 11:05:46 +09:00
Russell King
3afdb0f352 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 2011-03-10 13:53:29 +00:00
Linus Walleij
29772c4e28 ARM: 6764/1: pl011: factor out FIFO to TTY code
This piece of code was just slightly different between the DMA
and IRQ paths, in DMA mode we surely shouldn't read more than
256 character either, so factor this out in its own function and
use for both DMA and PIO mode.

Tested on Ux500 and U300.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-10 10:07:24 +00:00
Linus Walleij
ead76f329f ARM: 6763/1: pl011: add optional RX DMA to PL011 v2
This adds an optional RX DMA codepath for the devices that
support this by using the apropriate burst sizes instead of
pulling single bytes.

Includes portions of code written by Russell King during
a PL08x hacking session.

This has been tested on U300 and Ux500.

Tested-by: Jerzy Kasenberg <jerzy.kasenberg@tieto.com>
Tested-by: Grzegorz Sygieda <grzegorz.sygieda@tieto.com>
Tested-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com>
Signed-off-by: Per Forlin <per.friden@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-10 10:07:22 +00:00
Konrad Rzeszutek Wilk
bbd5a762b4 xen/hvc: Disable probe_irq_on/off from poking the hvc-console IRQ line.
This fixes a particular nasty racing problem found when using
Xen hypervisor with the console (hvc) output being routed to the
serial port and the serial port receiving data when
probe_irq_off(probe_irq_on) is running.

Specifically the bug manifests itself with:

[    4.470693] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[    4.470693] IP: [<ffffffff810a8c65>] handle_IRQ_event+0xe/0xc9
..snip..
[    4.470693] Call Trace:
[    4.470693]  <IRQ>
[    4.470693]  [<ffffffff810aa645>] handle_percpu_irq+0x3c/0x69
[    4.470693]  [<ffffffff8123cda7>] __xen_evtchn_do_upcall+0xfd/0x195
[    4.470693]  [<ffffffff810308cf>] ? xen_restore_fl_direct_end+0x0/0x1
[    4.470693]  [<ffffffff8123d873>] xen_evtchn_do_upcall+0x32/0x47
[    4.470693]  [<ffffffff81034dfe>] xen_do_hypervisor_callback+0x1e/0x30
[    4.470693]  <EOI>
[    4.470693]  [<ffffffff8100922a>] ? hypercall_page+0x22a/0x1000
[    4.470693]  [<ffffffff8100922a>] ? hypercall_page+0x22a/0x1000
[    4.470693]  [<ffffffff810301c5>] ? xen_force_evtchn_callback+0xd/0xf
[    4.470693]  [<ffffffff810308e2>] ? check_events+0x12/0x20
[    4.470693]  [<ffffffff81030889>] ? xen_irq_enable_direct_end+0x0/0x7
[    4.470693]  [<ffffffff810ab0a0>] ? probe_irq_on+0x8f/0x1d7
[    4.470693]  [<ffffffff812b105e>] ? serial8250_config_port+0x7b7/0x9e6
[    4.470693]  [<ffffffff812ad66c>] ? uart_add_one_port+0x11b/0x305

The bug is trigged by three actors working together:
 A). serial_8250_config_port calling
	probe_irq_off(probe_irq_on())
     wherein all of the IRQ handlers are being started and shut off.
     The functions utilize the sleep functions so the minimum time
     they are run is 120 msec.
 B). Xen hypervisor receiving on the serial line any character and
     setting the bits in the event channel - during this 120 msec timeframe.
 C). The hvc API makes a call to 'request_irq' (and hence setting desc->action
     to a valid value), much much later - when user space opens
     /dev/console (hvc_open). To make the console usable during bootup,
     the Xen HVC implementation sets the IRQ chip (and correspondingly
     the event channel) much earlier. The IRQ chip handler that is used
     is the handle_percpu_irq (aaca49642b)

Back to the issue. When A) is being called it ends up calling the
xen_percpu_chip's chip->startup twice and chip->shutdown once. Those
are set to the default_startup and mask_irq (events.c) respectivly.
If (and this seems to depend on what serial concentrator you use), B)
gets data from the serial port it sets in the event channel a pending bit.
When A) calls chip->startup(), the masking of the pending bit, and
unmasking of the event channel mask, and also setting of the upcall_pending
flag is done (since there is data present on the event channel).
If before the 120 msec has elapsed, any IRQ handler (Xen IRQ has one
IRQ handler, which checks the event channels bitmap to figure which one
to call) is called we end up calling the handle_percpu_irq. The
handle_percpu_irq calls desc->action (which is NULL) and we blow up.

Caveats: I could only reproduce this on 2.6.32 pvops. I am not sure
why this is not showing up on 2.6.38 kernel.

The probe_irq_on/off has code to disable poking specific IRQ lines. This is
done by using the set_irq_noprobe() and then we do not have to
worry about the handle_percpu_irq being called before the IRQ action
handler has been installed.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 00:57:59 -05:00
Eric Bénard
ed43b47b29 n_gsm: fix UIH control byte : P bit should be 0
* the GSM 07.10 specification says in 5.4.3.1 that
'both stations shall set the P bit to 0'
  thanks to Alan Cox for finding this explanation in the spec

* without this fix, on Telit & Sim.com modems, opening a new DLC
randomly fails. Not setting PF bit of the control byte gives a
reliable behaviour on these modems.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-09 15:43:39 -08:00
Mayank Rana
5504623785 serial: msm_serial_hs: Add MSM high speed UART driver
This driver supports UART-DM HW on MSM platforms. It uses the on
chip DMA to drive data transfers and has optional support for UART
power management independent of Linux suspend/resume and wakeup
from Rx.

The driver was originally developed by Google. It is functionally
equivalent to the version available at:
http://android.git.kernel.org/?p=kernel/experimental.git
the differences being:
1) Remove wakelocks and change unsupported DMA API.
2) Replace clock selection register codes by macros.
3) Fix checkpatch errors and add inline documentation.
4) Add runtime PM hooks for active power state transitions.
5) Handle error path and cleanup resources if required.

CC: Nick Pelly <npelly@google.com>
Signed-off-by: Sankalp Bose <sankalpb@codeaurora.org>
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 12:08:05 -08:00
Xiaotian Feng
00bff392c8 tty_audit: fix tty_audit_add_data live lock on audit disabled
The current tty_audit_add_data code:

        do {
                size_t run;

                run = N_TTY_BUF_SIZE - buf->valid;
                if (run > size)
                        run = size;
                memcpy(buf->data + buf->valid, data, run);
                buf->valid += run;
                data += run;
                size -= run;
                if (buf->valid == N_TTY_BUF_SIZE)
                        tty_audit_buf_push_current(buf);
        } while (size != 0);

If the current buffer is full, kernel will then call tty_audit_buf_push_current
to empty the buffer. But if we disabled audit at the same time, tty_audit_buf_push()
returns immediately if audit_enabled is zero.  Without emptying the buffer.
With obvious effect on tty_audit_add_data() that ends up spinning in that loop,
copying 0 bytes at each iteration and attempting to push each time without any effect.
Holding the lock all along.

Suggested-by: Alexander Viro <aviro@redhat.com>
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 12:04:50 -08:00
Alexandre Courbot
36003386f8 serial: sh-sci: fix deadlock when resuming from S3 sleep
S3 sleep invokes the shutdown callback of the sh-sci driver, which
suspends the clocks until they are reactivated by a call to startup.
However, before the latter is invoked, sci_set_termios may be called on
the port by uart_resume_port. In such cases it will endlessly wait for
the TEND bit to raise, which will never happen since the clocks are
disabled.

This patch ensures that clocks are enabled when ports registers are
manipulated within sci_set_termios.

Signed-off-by: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-04 15:57:10 +09:00
Benjamin Herrenschmidt
c7704d352d powerpc/pseries: Reduce HVCS driver insanity
The HVCS driver, for those who don't know, is a driver for the "server" side
of the IBM virtual terminal mechanism allowing Linux partitions to act as
terminal servers under IBM PowerVM hypervisor. It's almost never used on
the field at the moment.

However, it's part of our configs, and in its current incarnation, will
allocate the tty driver & major (with 64 minors) and create a kernel thread
whether it's used or not, ie, whether the hypervisor did put a virtual
terminal server device node in the partition or not (or whether running on
a pseries machine or not even).

This in turns causes modern distro's udev's to start trying to open all
those 64 minors at boot, which, since they aren't linked to anything,
causes the driver to spew errors in the kernel log for each of them.

Not nice.

This moves all that initialization to a function which is now only called
the first time a terminal server virtual IO device is actually probed
(that is almost never).

There's still a _LOT_ of cleanup that can be done in this driver, some
simple (almost all printk's statements in there shall either just be
removed or in some case turned into better written & more informative
messages, including using the dev_* variants etc...). This is left as
an exercise for whoever actually cares about that driver.

One could also try to be smart and dispose of all the tty related
resources when the last instance of the VIO server device
is removed (Hotplug anybody ?).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-02 16:50:25 +11:00
Arnd Bergmann
5edc341313 drivers: remove extraneous includes of smp_lock.h
These were missed the last time I cleaned this up
globally, because of code moving around or new code
getting merged.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-03-02 00:02:40 +01:00
Tobias Klauser
9f15444fef tty: serial: altera_jtaguart: Add device tree support
Advertise the possibility to use this driver with device tree if
CONFIG_OF is set.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-01 09:38:27 -07:00
Tobias Klauser
7c9325d79a tty: serial: altera_uart: Add devicetree support
With the recent switch of the (currently still out-of-tree) Nios2 Linux
port to devicetree we want to be able to retrieve the resources and
properties from dts.

The old method to retrieve resources and properties from platform data
is still supported.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-01 09:38:27 -07:00
Grant Likely
793218dfea dt/serial: Eliminate users of of_platform_{,un}register_driver
Get rid of users of of_platform_driver in drivers/serial.  The
of_platform_{,un}register_driver functions are going away, so the
users need to be converted to using the platform_bus_type directly.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-02-28 13:22:46 -07:00
Grant Likely
e5263a5176 dt: uartlite: merge platform and of_platform driver bindings
of_platform_driver is getting removed, and a single platform_driver
can now support both devicetree and non-devicetree use cases.  This
patch merges the two driver registrations.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-02-28 13:22:43 -07:00
Ken Kawasaki
27aadb615a fmvj18x_cs: add new id
fmvj18x_cs:add new id
           Toshiba lan&modem multifuction card (model name:IPC5010A)

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 12:06:20 -08:00
Tejun Heo
2c590f3ca9 nozomi: don't use flush_scheduled_work()
flush_scheduled_work() in tty_exit() doesn't seem to target any
specific work.  If it was to flush work items used in tty generic
layer, they're already flushed properly during tty release.

flush_scheduled_work() is going away.  Remove the seemingly redundant
usage.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-25 11:56:10 -08:00
Grant Likely
8c6e9112eb tty/serial: Relax the device_type restriction from of_serial
There is no need to test for a device_type property in ns8250
compatible serial ports.  device_type is an OpenFirmware property that
is not required when using the flattened tree representation.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-25 10:02:16 -08:00
Greg Kroah-Hartman
f227e08b71 Merge 2.6.38-rc6 into tty-next
This was to resolve a merge issue with drivers/char/Makefile and
drivers/tty/serial/68328serial.c

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-24 11:36:31 -08:00
Russell King
aa25afad2c ARM: amba: make probe() functions take const id tables
Make Primecell driver probe functions take a const pointer to their
ID tables.  Drivers should never modify their ID tables in their
probe handler.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23 16:24:14 +00:00
Tomoya MORINAGA
fec38d1752 pch_uart: Fix DMA channel miss-setting issue.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 17:22:05 -08:00
Tomoya MORINAGA
60d1031e11 pch_uart: fix exclusive access issue
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 17:22:04 -08:00
Tomoya MORINAGA
9af7155bb0 pch_uart: fix auto flow control miss-setting issue
Currently, auto-flow control setting processing is not set correctly.
This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 17:22:04 -08:00
Tomoya MORINAGA
aac6c0b0fd pch_uart: fix uart clock setting issue
Currently, uart clock is not set correctly.
This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 17:22:03 -08:00
Tomoya MORINAGA
23877fdc6d pch_uart : Use dev_xxx not pr_xxx
For easy to understad which port the message is out,
replace pr_xxx with dev_xxx.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 17:22:03 -08:00
Tomoya MORINAGA
1822076cf3 pch_uart : Reduce memcpy
Reduce memcpy for performance improvement.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 17:22:03 -08:00
Tomoya MORINAGA
7e46132965 pch_uart: add spin_lock_init
Currently, spin_lock is not initialized.
Thus, add spin_lock_init().

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 17:22:03 -08:00
Tomoya MORINAGA
da3564ee02 pch_uart: add multi-scatter processing
Currently, this driver can handle only single scatterlist.
Thus, it can't send data beyond FIFO size.

This patch enables this driver can handle multiple scatter list.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 17:22:02 -08:00
Greg Kroah-Hartman
282361a046 tty: move ipwireless driver from drivers/char/pcmcia/ to drivers/tty/
As planned by Arnd Bergmann, this moves the ipwireless driver to the
drivers/tty/ directory as that's where it really belongs.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 16:23:22 -08:00
Greg Kroah-Hartman
a6afd9f3e8 tty: move a number of tty drivers from drivers/char/ to drivers/tty/
As planned by Arnd Bergmann, this moves the following drivers from
drivers/char/ to drivers/tty/ as that's where they really belong:
	amiserial
	nozomi
	synclink
	rocket
	cyclades
	moxa
	mxser
	isicom
	bfin_jtag_comm

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 16:14:56 -08:00
Tobias Klauser
44ed76b78e tty: serial: altera_jtaguart: Fixup type usage of port flags
port->flags is of type upf_t, which corresponds to UPF_* flags.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 15:50:04 -08:00
Tobias Klauser
72af4762ee tty: serial: altera_jtaguart: Support getting mapbase and IRQ from resources
This will make it easier to get the driver to support device tree. The
old platform data method is still supported though.

Also change the driver to use only one platform device per port.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 15:50:04 -08:00
Tobias Klauser
3231f07507 tty: serial: altera_jtaguart: Remove unused function early_altera_jtaguart_setup
This is not even used in nios2 arch code anymore.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 15:50:04 -08:00