Commit Graph

42 Commits

Author SHA1 Message Date
Linus Torvalds
2f78d8e249 IEEE 1394 (FireWire) subsystem updates post v3.4:
- Fix mismatch between DMA mapping direction (was wrong) and DMA synchronization
     direction (was correct) of isochronous reception buffers of userspace drivers
     if vma-mapped for R/W access.  For example, libdc1394 was affected.
 
   - more consistent retry stategy in device discovery/ rediscovery, and improved
     failure diagnostics
 
   - various small cleanups, e.g. use SCSI layer's DMA mapping API in firewire-sbp2
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.17 (GNU/Linux)
 
 iQIcBAABAgAGBQJPvoOWAAoJEHnzb7JUXXnQpG4P/j4u9kU+MDegDrRsAzZBdP+6
 in2FW8opUzSXZyLSzU/JYcO7P0luEEdLIE65fkaVRbP1x6m7aAjgaAO/0zbqZQPD
 QVyIAOPa8zcbEIi1cEnI75KU/AMyQpMk/eU9Et4FrbQszgyFvJNe+hS+MocMooPt
 vukqmWJuIPfH/G3FsX0eQWEXS7GktkYxmLJM/k6z4JpngAVmelM/Ce45VFg7tbN+
 IeV5N7+FF4zKmwgiKIpkw5tSO6If7mjoQQVH/Q8DiHJDhFlDUrKR9/TvaJesVtEg
 5n97BbfvXc8mu6EE8lbl1ats2R1I00JDpMylHPt4J6G1XDjb1/GvqSjXYXwPT77J
 O4xZwqT4C5JKnG9h2a4npf6PgDHBbMnUK9cDBxfA5ZPkTeZmGXWuP05zYJqeNJm9
 UrEusEjzEEspVWFqxOD+2/YLF/0rxqA/P1C7Luuw7Y9nIcCt3VskuW6iebYuf5Dk
 yNoykYVph8zDJE+Am7jtsgNCPfd4TomFttjMcc/0EVqNa1iVO/AuLlvYv+Ab75oU
 BpOUEg8Pq9nQeya3XjM585R0rF4PG5wsVrBe2ZzJ+cqNe6JH264/YuBgFv1bkUg3
 UtHNIG633KAk71P1jl7PeuvAQksLnCYak2JOviZ/oB79Yamoxifhcm4mNkwTeCv7
 paRqDNAzoaThqvqx723E
 =fulr
 -----END PGP SIGNATURE-----

Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull IEEE 1394 (FireWire) subsystem updates from Stefan Richter:

 - Fix mismatch between DMA mapping direction (was wrong) and DMA
   synchronization direction (was correct) of isochronous reception
   buffers of userspace drivers if vma-mapped for R/W access.  For
   example, libdc1394 was affected.

 - more consistent retry stategy in device discovery/ rediscovery, and
   improved failure diagnostics

 - various small cleanups, e.g. use SCSI layer's DMA mapping API in
   firewire-sbp2

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: sbp2: document the absence of alignment requirements
  firewire: sbp2: remove superfluous blk_queue_max_segment_size() call
  firewire: sbp2: use scsi_dma_(un)map
  firewire: sbp2: give correct DMA device to scsi framework
  firewire: core: fw_device_refresh(): clean up error handling
  firewire: core: log config rom reading errors
  firewire: core: log error in case of failed bus manager lock
  firewire: move rcode_string() to core
  firewire: core: improve reread_config_rom() interface
  firewire: core: wait for inaccessible devices after bus reset
  firewire: ohci: omit spinlock IRQ flags where possible
  firewire: ohci: correct signedness of a local variable
  firewire: core: fix DMA mapping direction
  firewire: use module_pci_driver
2012-05-24 12:57:47 -07:00
Chris Boot
fc5f80b152 firewire: Move fw_card kref functions into linux/firewire.h
When writing a firewire driver that doesn't deal with struct fw_device
objects (e.g. it only publishes FireWire units and doesn't subscribe to
them), you likely need to keep referenced to struct fw_card objects so
that you can send messages to other nodes. This patch moves
fw_card_put(), fw_card_get() and fw_card_release() into the public
include/linux/firewire.h header instead of drivers/firewire/core.h, and
adds EXPORT_SYMBOL_GPL(fw_card_release).

The firewire-sbp-target module requires these so it can keep a reference
to the fw_card object in order that it can fetch ORBs to execute and
read/write related data and status information.

Signed-off-by: Chris Boot <bootc@bootc.net>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09 15:25:17 -07:00
Clemens Ladisch
3b00b00888 firewire: core: log error in case of failed bus manager lock
If the lock access to the bus manager register fails, also log the
actual error that caused it to fail.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17 22:56:53 +02:00
Clemens Ladisch
d1bbd20972 firewire: allow explicit flushing of iso packet completions
Extend the kernel and userspace APIs to allow reporting all currently
completed isochronous packets, even if the next interrupt packet has not
yet been reached.  This is required to determine the status of the
packets at the end of a paused or stopped stream, and useful for more
precise synchronization of audio streams.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:39 +01:00
Stefan Richter
26b4950de1 firewire: core: prefix log messages with card name
Associate all log messages from firewire-core with the respective card
because some people have more than one card.  E.g.
    firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0
    firewire_core: created device fw0: GUID 0814438400000389, S800
    firewire_core: phy config: new root=ffc1, gap_count=5
    firewire_core: created device fw1: GUID 0814438400000388, S800
    firewire_core: created device fw2: GUID 0001d202e06800d1, S800
turns into
    firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0
    firewire_core 0000:04:00.0: created device fw0: GUID 0814438400000389, S800
    firewire_core 0000:04:00.0: phy config: new root=ffc1, gap_count=5
    firewire_core 0000:05:00.0: created device fw1: GUID 0814438400000388, S800
    firewire_core 0000:04:00.0: created device fw2: GUID 0001d202e06800d1, S800

This increases the module size slightly; to keep this in check, turn the
former printk wrapper macros into functions.  Their implementation is
largely copied from driver core's dev_printk counterparts.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:00 +01:00
Arun Sharma
60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Stefan Richter
105e53f863 firewire: sbp2: parallelize login, reconnect, logout
The struct sbp2_logical_unit.work items can all be executed in parallel
but are not reentrant.  Furthermore, reconnect or re-login work must be
executed in a WQ_MEM_RECLAIM workqueue.

Hence replace the old single-threaded firewire-sbp2 workqueue by a
concurrency-managed but non-reentrant workqueue with rescuer.
firewire-core already maintains one, hence use this one.

In earlier versions of this change, I observed occasional failures of
parallel INQUIRY to an Initio INIC-2430 FireWire 800 to dual IDE bridge.
More testing indicates that parallel INQUIRY is not actually a problem,
but too quick successions of logout and login + INQUIRY, e.g. a quick
sequence of cable plugout and plugin, can result in failed INQUIRY.
This does not seem to be something that should or could be addressed by
serialization.

Another dual-LU device to which I currently have access to, an
OXUF924DSB FireWire 800 to dual SATA bridge with firmware from MacPower,
has been successfully tested with this too.

This change is beneficial to environments with two or more FireWire
storage devices, especially if they are located on the same bus.
Management tasks that should be performed as soon and as quickly as
possible, especially reconnect, are no longer held up by tasks on other
devices that may take a long time, especially login with INQUIRY and sd
or sr driver probe.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-05-10 22:53:46 +02:00
Stefan Richter
6ea9e7bbfc firewire: core: use non-reentrant workqueue with rescuer
firewire-core manages the following types of work items:

fw_card.br_work:
  - resets the bus on a card and possibly sends a PHY packet before that
  - does not sleep for long or not at all
  - is scheduled via fw_schedule_bus_reset() by
      - firewire-ohci's pci_probe method
      - firewire-ohci's set_config_rom method, called by kernelspace
        protocol drivers and userspace drivers which add/remove
	Configuration ROM descriptors
      - userspace drivers which use the bus reset ioctl
      - itself if the last reset happened less than 2 seconds ago

fw_card.bm_work:
  - performs bus management duties
  - usually does not (but may in corner cases) sleep for long
  - is scheduled via fw_schedule_bm_work() by
      - firewire-ohci's self-ID-complete IRQ handler tasklet
      - firewire-core's fw_device.work instances whenever the root node
        device was (successfully or unsuccessfully) discovered,
	refreshed, or rediscovered
      - itself in case of resource allocation failures or in order to
        obey the 125ms bus manager arbitration interval

fw_device.work:
  - performs node probe, update, shutdown, revival, removal; including
    kernel driver probe, update, shutdown and bus reset notification to
    userspace drivers
  - usually sleeps moderately long, in corner cases very long
  - is scheduled by
      - firewire-ohci's self-ID-complete IRQ handler tasklet via the
        core's fw_node_event
      - firewire-ohci's pci_remove method via core's fw_destroy_nodes/
        fw_node_event
      - itself during retries, e.g. while a node is powering up

iso_resource.work:
  - accesses registers at the Isochronous Resource Manager node
  - usually does not (but may in corner cases) sleep for long
  - is scheduled via schedule_iso_resource() by
      - the owning userspace driver at addition and removal of the
        resource
      - firewire-core's fw_device.work instances after bus reset
      - itself in case of resource allocation if necessary to obey the
        1000ms reallocation period after bus reset

fw_card.br_work instances should not, and instances of the others must
not, be executed in parallel by multiple CPUs -- but were not protected
against that.  Hence allocate a non-reentrant workqueue for them.

fw_device.work may be used in the memory reclaim path in case of SBP-2
device updates.  Hence we need a workqueue with rescuer and cannot use
system_nrt_wq.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
2011-05-10 22:53:45 +02:00
Clemens Ladisch
13882a82ee firewire: optimize iso queueing by setting wake only after the last packet
When queueing iso packets, the run time is dominated by the two
MMIO accesses that set the DMA context's wake bit.  Because most
drivers submit packets in batches, we can save much time by
removing all but the last wakeup.

The internal kernel API is changed to require a call to
fw_iso_context_queue_flush() after a batch of queued packets.
The user space API does not change, so one call to
FW_CDEV_IOC_QUEUE_ISO must specify multiple packets to take
advantage of this optimization.

In my measurements, this patch reduces the time needed to queue
fifty skip packets from userspace to one sixth on a 2.5 GHz CPU,
or to one third at 800 MHz.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-05-10 22:53:45 +02:00
Stefan Richter
f30e6d3e41 firewire: octlet AT payloads can be stack-allocated
We do not need slab allocations anymore in order to satisfy
streaming DMA mapping constraints, thanks to commit da28947e7e
"firewire: ohci: avoid separate DMA mapping for small AT payloads".

(Besides, the slab-allocated buffers that firewire-core, firewire-sbp2,
and firedtv used to provide for 8-byte write and lock requests were
still not fully portable since they crossed cacheline boundaries or
shared a cacheline with unrelated CPU-accessed data.  snd-firewire-lib
got this aspect right by using an extra kmalloc/ kfree just for the
8-byte transaction buffer.)

This change replaces kmalloc'ed lock transaction scratch buffers in
firewire-core, firedtv, and snd-firewire-lib by local stack allocations.
Perhaps the most notable result of the change is simpler locking because
there is no need to serialize usages of preallocated per-device buffers
anymore.  Also, allocations and deallocations are simpler.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
2011-05-10 22:53:44 +02:00
Clemens Ladisch
dd5eeb99f4 firewire: core: increase default SPLIT_TIMEOUT value
The SPLIT_TIMEOUT mechanism is intended to detect requests that somehow
got lost.  However, when the timeout value is too low, transactions that
could have been completed successfully will be cancelled.  Furthermore,
there are chips whose firmwares ignore the configured split timeout and
send late split response; known examples are the DM1x00 (BeBoB), TCD22x0
(DICE), and some OXUF936QSE firmwares.

This patch changes the default timeout to two seconds, which happens to
be the default on other OSes, too.

Actual lost requests are extremely rare, so there should be no practical
downside to increasing the split timeout even on devices that work
correctly.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-03-20 16:45:24 +01:00
Clemens Ladisch
e71084af58 firewire: core: fix card->reset_jiffies overflow
On a 32-bit machine with, e.g., HZ=1000, jiffies will overflow after
about 50 days, so if there are between 25 and 50 days between bus
resets, the card->reset_jiffies comparisons can get wrong results.

To fix this, ensure that this timestamp always uses 64 bits.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: "Stefan Richter" <stefanr@s5r6.in-berlin.de>
2011-01-23 12:31:01 +01:00
Stefan Richter
6044565af4 firewire: core: fix unstable I/O with Canon camcorder
Regression since commit 1038953674, "firewire: core: check for 1394a
compliant IRM, fix inaccessibility of Sony camcorder":

The camcorder Canon MV5i generates lots of bus resets when asynchronous
requests are sent to it (e.g. Config ROM read requests or FCP Command
write requests) if the camcorder is not root node.  This causes drop-
outs in videos or makes the camcorder entirely inaccessible.
https://bugzilla.redhat.com/show_bug.cgi?id=633260

Fix this by allowing any Canon device, even if it is a pre-1394a IRM
like MV5i are, to remain root node (if it is at least Cycle Master
capable).  With the FireWire controller cards that I tested, MV5i always
becomes root node when plugged in and left to its own devices.

Reported-by: Ralf Lange
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: <stable@kernel.org> # 2.6.32.y and newer
2011-01-21 00:27:46 +01:00
Stefan Richter
e78483c5ae Merge firewire branches to be released post v2.6.35
Conflicts:
	drivers/firewire/core-card.c
	drivers/firewire/core-cdev.c

and forgotten #include <linux/time.h> in drivers/firewire/ohci.c

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-08-02 10:09:04 +02:00
Stefan Richter
2080222429 firewire: core: add forgotten dummy driver methods, remove unused ones
There is an at least theoretic race condition in which .start_iso etc.
could still be called between when the dummy driver is bound to the card
and when the children devices are being shut down.  Add dummy_start_iso
and friends.

On the other hand, .enable, .set_config_rom, .read_csr, write_csr do not
need to be implemented by the dummy driver, as commented.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-08-02 08:59:52 +02:00
Stefan Richter
bf54e1462b firewire: cdev: add PHY packet reception
Add an FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl() and
FW_CDEV_EVENT_PHY_PACKET_RECEIVED poll()/read() event for /dev/fw*.
This can be used to get information from remote PHYs by remote access
PHY packets.

This is also the 2nd half of the functionality (the receive part) to
support a userspace implementation of a VersaPHY transaction layer.

Safety considerations:

  - PHY packets are generally broadcasts, hence some kind of elevated
    privileges should be required of a process to be able to listen in
    on PHY packets.  This implementation assumes that a process that is
    allowed to open the /dev/fw* of a local node does have this
    privilege.

    There was an inconclusive discussion about introducing POSIX
    capabilities as a means to check for user privileges for these
    kinds of operations.

Other limitations:

  - PHY packet reception may be switched on by ioctl() but cannot be
    switched off again.  It would be trivial to provide an off switch,
    but this is not worth the code.  The client should simply close()
    the fd then, or just ignore further events.

  - For sake of simplicity of API and kernel-side implementation, no
    filter per packet content is provided.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-23 13:36:28 +02:00
Stefan Richter
18d0cdfd1a firewire: normalize status values in packet callbacks
core-transaction.c transmit_complete_callback() and close_transaction()
expect packet callback status to be an ACK or RCODE, and ACKs get
translated to RCODEs for transaction callbacks.

An old comment on the packet callback API (been there from the initial
submission of the stack) and the dummy_driver implementation of
send_request/send_response deviated from this as they also included
-ERRNO in the range of status values.

Let's narrow status values down to ACK and RCODE to prevent surprises.
RCODE_CANCELLED is chosen as the dummy_driver's RCODE as its meaning of
"transaction timed out" comes closest to what happens when a transaction
coincides with card removal.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-23 13:36:27 +02:00
Stefan Richter
02d37bed18 firewire: core: integrate software-forced bus resets with bus management
Bus resets which are triggered
  - by the kernel drivers after updates of the local nodes' config ROM,
  - by userspace software via ioctl
shall be deferred until after >=2 seconds after the last bus reset.

If multiple modifications of the local nodes' config ROM happen in a row,
only a single bus reset should happen after them.

When the local node's link goes from inactive to active or vice versa,
and at the two occasions of bus resets mentioned above --- and if the
current gap count differs from 63 --- the bus reset should be preceded
by a PHY configuration packet that reaffirms the gap count.  Otherwise a
bus manager would have to reset the bus again right after that.

This is necessary to promote bus stability, e.g. leave grace periods for
allocations and reallocations of isochronous channels and bandwidth,
SBP-2 reconnections etc.; see IEEE 1394 clause 8.2.1.

This change implements all of the above by moving bus reset initiation
into a delayed work (except for bus resets which are triggered by the
bus manager workqueue job and are performed there immediately).  It
comes with a necessary addition to the card driver methods that allows
to get the current gap count from PHY registers.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-13 09:58:27 +02:00
Stefan Richter
250b2b6dd4 firewire: cdev: fix fw_cdev_event_bus_reset.bm_node_id
Fix an obscure ABI feature that is a bit of a hassle to implement.
However, somebody put it into the ABI, so let's fill in a sensible
value there.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-08 16:52:02 +02:00
Stefan Richter
ae94801107 firewire: core: no need to track irq flags in bm_work
This is a workqueue job and always entered with IRQs enabled.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-08 16:45:54 +02:00
Stefan Richter
e847cc832b firewire: drop sizeof expressions from some request size arguments
In case of fw_card_bm_work()'s lock request, the present sizeof
expression is going to be wrong if somebody changes the fw_card's DMA
scratch buffer's size in the future.

In case of quadlet write requests, sizeof(u32) is just silly; it's 4.

In case of SBP-2 ORB pointer write requests, 8 is arguably quicker to
understand as the correct and only possible value than
sizeof(some_datum).

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-19 13:01:40 +02:00
Clemens Ladisch
c374ab4242 firewire: core: always enable cycle master packets
As part of the bus manager responsibilities, make sure that the cycle
master sends cycle start packets.  This is needed when the old bus
manager disabled the cycle master's cmstr bit and there are iso-capable
nodes on the new bus.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-06-10 08:41:51 +02:00
Clemens Ladisch
e91b2787d0 firewire: allocate broadcast channel in hardware
On OHCI 1.1 controllers, let the hardware allocate the broadcast channel
automatically.  This removes a theoretical race condition directly after
a bus reset where it could be possible to read the channel allocation
register with channel 31 still being unallocated.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-06-10 08:40:49 +02:00
Clemens Ladisch
7e0e314f19 firewire: core: add CSR abdicate support
Implement the abdicate bit, which is required for bus manager
capable nodes and tested by the Base 1394 Test Suite.

Finally, something to do at a command reset!  :-)

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-06-10 08:37:15 +02:00
Clemens Ladisch
8e4b50f94e firewire: core: add CSR SPLIT_TIMEOUT support
Implement the SPLIT_TIMEOUT registers.  Besides being required by the
spec, this is desirable for some IIDC devices and necessary for many
audio devices to be able to increase the timeout from userspace.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-06-10 08:26:28 +02:00
Clemens Ladisch
bda3b8a1fa firewire: core: retry on local errors in bus manager election
When the candidate bus manager fails to do the lock request with which
it tries to become bus manager, it assumes that the current IRM is not
actually IRM capable and forces itself to become root.  However, if that
lock request failed because the local node itself was not able to send
it, then we cannot blame the current IRM and should not steal its
rootness.

In this case, RCODE_SEND_ERROR is likely to indicate a temporary error
condition such as exhausted tlabels or low memory, so we better try
again later.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-06-10 08:23:28 +02:00
Stefan Richter
1038953674 firewire: core: check for 1394a compliant IRM, fix inaccessibility of Sony camcorder
Per IEEE 1394 clause 8.4.2.3, a contender for the IRM role shall check
whether the current IRM complies to 1394a-2000 or later.  If not force a
compliant node (e.g. itself) to become IRM.  This was implemented in the
older ieee1394 driver but not yet in firewire-core.

An older Sony camcorder (Sony DCR-TRV25) which implements 1394-1995 IRM
but neither 1394a-2000 IRM nor BM was now found to cause an
interoperability bug:
  - Camcorder becomes root node when plugged in, hence gets IRM role.
  - firewire-core successfully contends for BM role, proceeds to perform
    gap count optimization and resets the bus.
  - Sony camcorder ignores presence of a BM (against the spec, this is
    a firmware bug), performs its idea of gap count optimization and
    resets the bus.
  - Preceding two steps are repeated endlessly, bus never settles,
    regular I/O is practically impossible.
http://thread.gmane.org/gmane.linux.kernel.firewire.user/3913

This is an interoperability regression from the old to the new drivers.
Fix it indirectly by adding the 1394a IRM check.  The spec suggests
three and a half methods to determine 1394a compliance of a remote IRM;
we choose the method of testing the Config_ROM.Bus_Info.generation
field.  This is data that firewire-core should have readily available at
this point, i.e. does not require extra I/O.

Reported-by: Clemens Ladisch <clemens@ladisch.de> (missing 1394a check)
Reported-by: H. S. <hs.samix@gmail.com> (issue with Sony DCR-TRV25)
Tested-by: H. S. <hs.samix@gmail.com>

Cc: <stable@kernel.org> # .32.x and newer

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-02 19:48:13 +02:00
Clemens Ladisch
5c40cbfefa firewire: core: use separate timeout for each transaction
Using a single timeout for all transaction that need to be flushed does
not work if the submission of new transactions can defer the timeout
indefinitely into the future.  We need to have timeouts that do not
change due to other transactions; the simplest way to do this is with a
separate timer for each transaction.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (+ one lockdep annotation)
2010-05-19 00:26:30 +02:00
Stefan Richter
edd5bdaf12 firewire: core: clean up config ROM related defined constants
Clemens Ladisch pointed out that
  - BIB_IMC is not named like the field is called in the standard,
  - readers of the code may get worried about the magic 0x0c0083c0,
  - a CSR_NODE_CAPABILITIES key is there in the header but not put to
    good use.

So let's rename BIB_IMC, add a defined constant for Node_Capabilities
and a comment which reassures people that somebody thought about it and
they don't have to (or if they still do, tell them where they have to
look for confirmation), and prune our incomplete and arbitrary set of
defined constants of CSR key IDs.  And there is a nother magic number,
that of Bus_Information_Block.Bus_Name, to be defined and commented.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-19 20:00:44 +02:00
Stefan Richter
e300839da4 firewire: core: add_descriptor size check
Presently, firewire-core only checks whether descriptors that are to be
added by userspace drivers to the local node's config ROM do not exceed
a size of 256 quadlets.  However, the sum of the bare minimum ROM plus
all descriptors (from firewire-core, from firewire-net, from userspace)
must not exceed 256 quadlets.

Otherwise, the bounds of a statically allocated buffer will be
overwritten.  If the kernel survives that, firewire-core will
subsequently be unable to parse the local node's config ROM.

(Note, userspace drivers can add descriptors only through device files
of local nodes.  These are usually only accessible by root, unlike
device files of remote nodes which may be accessible to lesser
privileged users.)

Therefore add a test which takes the actual present and required ROM
size into account for all descriptors of kernelspace and userspace
drivers.

Cc: stable@kernel.org
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-26 20:54:50 +01:00
Stefan Richter
cb7c96da36 firewire: core: optimize Topology Map creation
The Topology Map of the local node was created in CPU byte order,
then a temporary big endian copy was created to compute the CRC,
and when a read request to the Topology Map arrived it had to be
converted to big endian byte order again.

We now generate it in big endian byte order in the first place.
This also rids us of 1000 bytes stack usage in tasklet context.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 23:10:48 +02:00
Stefan Richter
fe242579e9 firewire: core: clarify generate_config_rom usage
Move the static config ROM buffer into the scope of the two callers of
generate_config_rom().  That way the ROM length can be passed over as
return value rather than through a pointer argument.

It also becomes more obvious that accesses to the config ROM buffer have
to be serialized and how this is accomplished.  And firewire-core.ko
shrinks a bit as well.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 23:10:48 +02:00
Stefan Richter
8e85973efc firewire: optimize config ROM creation
The config ROM image of the local node was created in CPU byte order,
then a temporary big endian copy was created to compute the CRC, and
finally the card driver created its own big endian copy.

We now generate it in big endian byte order in the first place to avoid
one byte order conversion and the temporary on-stack copy of the ROM
image (1000 bytes stack usage in process context).  Furthermore, two
1000 bytes memset()s are replaced by one 1000 bytes - ROM length sized
memset.

The trivial fw_memcpy_{from,to}_be32() helpers are now superfluous and
removed.  The newly added __compute_block_crc() function will be folded
into fw_compute_block_crc() in a subsequent change.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 23:10:48 +02:00
Stefan Richter
9fb551bf72 firewire: normalize style of queue_work wrappers
A few stylistic changes to unify some code patterns in the subsystem:

  - The similar queue_delayed_work helpers fw_schedule_bm_work,
    schedule_iso_resource, and sbp2_queue_work now have the same call
    convention.
  - Two conditional calls of schedule_iso_resource are factored into
    another small helper.
  - An sbp2_target_get helper is added as counterpart to
    sbp2_target_put.

Object size of firewire-core is decreased a little bit, object size of
firewire-sbp2 remains unchanged.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 23:10:48 +02:00
Stefan Richter
b171e204b3 firewire: core: fix race with parallel PCI device probe
The config ROM buffer received from generate_config_rom is a globally
shared static buffer.  Extend the card_mutex protection in fw_add_card
until after the config ROM was copied into the card driver's buffer.
Otherwise, parallelized card driver probes may end up with ROM contents
that were meant for a different card.

firewire-ohci's card->driver->enable hook is safe to be called within
the card_mutex.  Furthermore, it is safe to reorder card_list update
versus card enable, which simplifies the code a little.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12 14:48:40 +02:00
Stefan Richter
6fdc037094 firewire: core: do not DMA-map stack addresses
The DMA mapping API cannot map on-stack addresses, as explained in
Documentation/DMA-mapping.txt.  Convert the two cases of on-stack packet
payload buffers in firewire-core (payload of lock requests in the bus
manager work and in iso resource management) to slab-allocated memory.

There are a number on-stack buffers for quadlet write or quadlet read
requests in firewire-core and firewire-sbp2.  These are harmless; they
are copied to/ from card driver internal DMA buffers since quadlet
payloads are inlined with packet headers.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-25 19:42:36 +02:00
Stefan Richter
d645f4dad0 firewire: core: fix iso context shutdown on card removal
If isochronous contexts existed when firewire-ohci was unloaded, the
core iso shutdown functions crashed with NULL dereferences, and buffers
etc. weren't released.

How the fix works:  We first copy the card driver's iso shutdown hooks
into the dummy driver, then fw_destroy_nodes notifies upper layers of
devices going away, these should shut down (including their iso
contexts), wait_for_completion(&card->done) will be triggered after
upper layers gave up all fw_device references, after which the card
driver's shutdown proceeds.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-16 22:48:09 +02:00
Stefan Richter
5a124d382e firewire: net: allow for unordered unit discovery
Decouple the creation and destruction of the net_device from the order
of discovery and removal of nodes with RFC 2734 unit directories since
there is no reliable order.  The net_device is now created when the
first RFC 2734 unit on a card is discovered, and destroyed when the last
RFC 2734 unit on a card went away.  This includes all remote units as
well as the local unit, which is therefore tracked as a peer now too.

Also, locking around the list of peers is slightly extended to guard
against peer removal.  As a side effect, fwnet_peer.pdg_lock has become
superfluous and is deleted.

Peer data (max_rec, speed, node ID, generation) are updated more
carefully.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-14 14:26:29 +02:00
Stefan Richter
f91e3bd842 firewire: net: style changes
Change names of types, variables, functions.
Omit debug code.
Use get_unaligned*, put_unaligned*.
Annotate big endian data.
Handle errors in __init.
Change whitespace.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-14 14:26:29 +02:00
Jay Fenlason
c76acec6d5 firewire: add IPv4 support
Implement IPv4 over IEEE 1394 as per RFC 2734 for the newer firewire
stack.  This feature has only been present in the older ieee1394 stack
via the eth1394 driver.

Still to do:
  - fix ipv4_priv and ipv4_node lifetime logic
  - fix determination of speeds and max payloads
  - fix bus reset handling
  - fix unaligned memory accesses
  - fix coding style
  - further testing/ improvement of fragment reassembly
  - perhaps multicast support

Signed-off-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, copyright note, changelog)
2009-06-14 14:26:28 +02:00
Stefan Richter
099d54143e firewire: core: prepare for non-core children of card devices
The IP-over-1394 driver will add child devices beneath card devices
which are not of type fw_device.  Hence firewire-core's callbacks in
device_for_each_child() and device_find_child() need to check for the
device type now.

Initial version written by Jay Fenlason.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-06 21:45:50 +02:00
Stefan Richter
e71d31da06 firewire: rename source files
The source files of firewire-core, firewire-ohci, firewire-sbp2, i.e.
 "drivers/firewire/fw-*.c"
are renamed to
 "drivers/firewire/core-*.c",
 "drivers/firewire/ohci.c",
 "drivers/firewire/sbp2.c".

The old fw- prefix was redundant to the directory name.  The new core-
prefix distinguishes the files according to which driver they belong to.

This change comes a little late, but still before further firewire
drivers are added as anticipated RSN.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-05 16:26:18 +02:00