Commit Graph

648 Commits

Author SHA1 Message Date
Benoit Taine
a328512d3c USB: storage: ene_ub6250: Use kmemdup instead of kmalloc + memcpy
This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/memdup.cocci

Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 16:23:44 -07:00
Daniele Forsi
6ed07d45d0 USB: Nokia 5300 should be treated as unusual dev
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:41:07 -04:00
Victor A. Santos
f0ef5d4179 USB: Nokia 305 should be treated as unusual dev
Signed-off-by: Victor A. Santos <victoraur.santos@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:41:07 -04:00
Daniele Forsi
df602c2d23 usb: storage: shuttle_usbat: fix discs being detected twice
Even if the USB-to-ATAPI converter supported multiple LUNs, this
driver would always detect the same physical device or media because
it doesn't use srb->device->lun in any way.
Tested with an Hewlett-Packard CD-Writer Plus 8200e.

Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 18:04:28 -04:00
Oliver Neukum
94d72f0089 uas: fix deadlocky memory allocations
There are also two allocations with GFP_KERNEL in the pre-/post_reset
code paths. That is no good because that is a part of the SCSI error handler.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16 14:04:59 -07:00
Oliver Neukum
c637f1fa7b uas: fix error handling during scsi_scan()
intfdata is set only after scsi_scan(). uas_pre_reset() however
needs intfdata to be valid and will follow the NULL pointer
killing khubd. intfdata must be preemptively set before the
host is registered and undone in the error case.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16 14:04:59 -07:00
Oliver Neukum
e7eda93293 uas: fix GFP_NOIO under spinlock
Quote Dan:

The patch e36e64930c: "uas: Use GFP_NOIO rather then GFP_ATOMIC
where possible" from Nov 7, 2013, leads to the following static
checker warning:

        drivers/usb/storage/uas.c:806 uas_eh_task_mgmt()
        error: scheduling with locks held: 'spin_lock:lock'

Some other allocations under spinlock are not caught.
The fix essentially reverts e36e64930c

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16 14:04:59 -07:00
Oliver Neukum
14aec58932 storage: accept some UAS devices if streams are unavailable
On some older XHCIs streams are not supported and the UAS driver
will fail at probe time. For those devices storage should try
to bind to UAS devices.
This patch adds a flag for stream support to HCDs and evaluates
it.

[Note: Sarah fixed a bug where the USB 2.0 root hub, not USB 3.0 root
hub would get marked as being able to support streams.]

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-03-04 15:41:09 -08:00
Hans de Goede
7cace978fb uas: Remove comment about registering a uas scsi controller for each usb bus
Although an interesting concept, I don't think that this is a good idea:

-This will result in lots of "virtual" scsi controllers confusing users
-If we get a scsi-bus-reset we will now need to do a usb-device-reset of all
 uas devices on the same usb bus, which is something to avoid if possible

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:27 -08:00
Hans de Goede
f50a4968de uas: Add Hans de Goede as uas maintainer
At the kernel-summit Sarah Sharp asked me if I was willing to become the
uas maintainer. I said yes, and here is a patch to make this official.

Also remove Matthew Wilcox and Sarah Sharp as maintainers at their request.

I've also added myself to the module's author tag, so that if people look there
rather then in maintainers they will know they should bug me about uas too.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:27 -08:00
Gerd Hoffmann
dc88608dba uas: remove BROKEN
xhci streams support is fixed, unblock usb attached scsi.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:26 -08:00
Hans de Goede
37599f9603 uas: Make sure sg elements are properly aligned
Copy the sg alignment trick from the usb-storage driver, without this I'm
seeing intermittent errors when using uas devices with an ehci controller.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:26 -08:00
Hans de Goede
8e453155d7 uas: Add some data in/out ready iu sanity checks
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:26 -08:00
Hans de Goede
876285cc9c uas: Improve error reporting
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:25 -08:00
Hans de Goede
673331c87c uas: Use the right error codes for different kinds of errors
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:25 -08:00
Hans de Goede
3a4462e0e2 uas: Clear cmdinfo on command queue-ing
The scsi error handling path re-uses previously queued up (and errored-out)
cmds. If such a re-used cmd had a data-phase then cmdinfo will have
data_in_urb / data_out_urb still set to the free-ed urbs from the errored-out
cmd, and they will get free-ed a second time when the error handling cmd
completes, corrupting the kernel heap.

Clearing cmdinfo on command queue-ing fixes this, and seems like a good idea
in general.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:24 -08:00
Hans de Goede
21fc05b680 uas: Fix memory management
The scsi-host structure is refcounted, scsi_remove_host tears down the
scsi-host but does not decrement the refcount, so we need to call
scsi_put_host on disconnect to get the underlying memory to be freed.

After calling scsi_remove_host, the scsi-core may still hold a reference to
the scsi-host, iow we may still get called after uas_disconnect, but we
do our own life cycle management of uas_devinfo, freeing it on disconnect,
and thus may end up using devinfo after it has been freed. Switch to letting
scsi_host_alloc allocate and manage the memory for us.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:24 -08:00
Hans de Goede
c6f63207a3 uas: Fix command / task mgmt submission racing with disconnect
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:23 -08:00
Hans de Goede
040d1a8f11 uas: cmdinfo: use only one list head
cmds are either on the inflight list or on the dead list, never both, so
we only need one list head.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:23 -08:00
Hans de Goede
da3033ea08 uas: add uas_mark_cmd_dead helper function
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:22 -08:00
Hans de Goede
61c09ce510 uas: Properly complete inflight commands on bus-reset or disconnect
Before this commit the uas driver would keep track of scsi commands which still
need to have some urbs submitted to the device, and complete this with an
ABORT result code on bus-reset or disconnect, but in flight scsi commands
which have all their urbs submitted, and thus are not part of the work list,
would never get their done callback called.

The problem is killed sense urbs don't have any tag info, so it is impossible
to tell which scsi cmd they belong to, so merely making sure all the urbs
have completed one way or the other is not enough.

This commit fixes this by changing the work list to an inflight list, which
keeps tracks of all inflight scsi cmnds, using the IS_IN_WORK_LIST flag to
determine if actual work needs to be done in uas_do_work(), and by moving
marking all inflight scsi commands as aborted and moving them to the dead list
on bus-reset or disconnect.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:22 -08:00
Hans de Goede
c6d4579d4b uas: uas_alloc_data_urb: Remove unnecessary use_streams check
uas_alloc_data_urb always gets called with a stream_id value of 0 when not
using streams. Removing the check makes it consistent with uas_alloc_sense_urb.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:21 -08:00
Hans de Goede
f323abcda3 uas: Fix task-management not working when connected over USB-2
For USB-2 connections the stream-id must always be 0.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:21 -08:00
Hans de Goede
da65c2bb99 uas: Reset device on reboot
Some BIOS-es will hang on reboot when an uas device is attached and left in
uas mode on reboot.

This commit adds a shutdown handler which on reboot puts the device back into
usb-storage mode, fixing the hang on reboot on these systems.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:21 -08:00
Hans de Goede
0df1f663f3 uas: Add suspend/resume support
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:20 -08:00
Hans de Goede
e36e64930c uas: Use GFP_NOIO rather then GFP_ATOMIC where possible
We can sleep in our own workqueue (which is the whole reason for having
it), and scsi error handlers are also always called from a context which
may sleep.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:20 -08:00
Hans de Goede
b83b86a352 uas: Don't allow more then one task to run at the same time
Since we use a fixed tag / stream for tasks we cannot allow more then one
to run at the same time. This could happen before this time if a task timed
out.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:20 -08:00
Hans de Goede
70cf0fba76 uas: task_mgmt: Kill the sense-urb if we fail to submit the cmd urb
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:19 -08:00
Hans de Goede
58d51444cd uas: Not being able to alloc streams when connected through usb-3 is an error
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:19 -08:00
Hans de Goede
6134041bef uas: Verify endpoint descriptors from uas_use_uas_driver()
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:19 -08:00
Hans de Goede
74d71aec61 uas: Drop fixed endpoint config handling
The fixed endpoint config code was only necessary to deal with an early
uas prototype which has never been released, so lets drop it and enforce
proper uas endpoint descriptors.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:18 -08:00
Hans de Goede
d77adc0284 uas: Move uas_find_endpoints to uas-detect.h
No changes, just the move.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:18 -08:00
Hans de Goede
d495c1baa1 uas: Fix bounds check in uas_find_endpoints
The loop uses up to 3 bytes of the endpoint extra data.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:18 -08:00
Hans de Goede
34f11e59c3 uas: Add uas_find_endpoints() helper function
This is a preparation patch for adding better descriptor validation.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:17 -08:00
Hans de Goede
97172a660c uas: Honor no-uas quirk set in usb-storage's quirks module parameter
Falling back from uas to usb-storage requires coordination between uas and
usb-storage, so use usb-storage's quirks module parameter, rather then
requiring the user to pass a param to 2 different modules.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:17 -08:00
Hans de Goede
d24d481b7d usb-storage: Modify and export adjust_quirks so that it can be used by uas
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:17 -08:00
Hans de Goede
5bfd5b5d8b usb-storage: Don't bind to uas devices if the uas driver is enabled
uas devices have 2 alternative settings on their usb-storage interface,
one for usb-storage and one for uas. Using the uas driver is preferred, so if
the uas driver is enabled, and the device has an uas alt setting, don't bind.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:16 -08:00
Hans de Goede
79b4c06112 uas: Add the posibilty to blacklist uas devices from using the uas driver
Once we start supporting uas hardware, and as more and more uas devices
become available, we will likely start seeing broken devices. This patch
prepares for the inevitable need for blacklisting those devices from
using the uas driver (they will use usb-storage instead).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:16 -08:00
Hans de Goede
82aa0387d5 uas: Move uas detect code to uas-detect.h
This is a preparation patch for teaching usb-storage to not bind to
uas devices.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:13 -08:00
Hans de Goede
e1be067b68 uas: Add a uas_find_uas_alt_setting helper function
This is a preparation patch for teaching usb-storage to not bind to
uas devices.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:12 -08:00
Hans de Goede
d3f7c1560a uas: Use all available stream ids
If we get ie 16 streams we can use stream-id 1-16, not 1-15.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:12 -08:00
Hans de Goede
e52e031498 uas: s/response_ui/response_iu/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:11 -08:00
Hans de Goede
4de7a3735b uas: Fix reset handling for externally triggered reset
Handle usb-device resets not triggered from uas_eh_bus_reset_handler(), when
this happens, disable cmd queuing during the reset, and wait for existing
requests to finish in pre_reset.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:10 -08:00
Hans de Goede
be326f4c9b uas: Fix reset locking
Fix the uas_eh_bus_reset_handler not properly taking the usbdev lock
before calling usb_device_reset, the usb-core expects this lock to be
taken when usb_device_reset is called.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:10 -08:00
Hans de Goede
6c2334e901 uas: Fix uas not working when plugged into an ehci port
I thought it would be a good idea to also test uas with usb-2, and it turns out
it was, as it did not work. The problem is that the uas driver was passing the
bEndpointAddress' direction bit to usb_rcvbulkpipe, the xhci code seems to not
care about this, but with the ehci code this causes usb_submit_urb failure.

With this fixed the uas code works nicely with an uas device plugged into
an ehci port.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:09 -08:00
Hans de Goede
a887cd3663 uas: uas_alloc_cmd_urb: drop unused stream_id parameter
The cmd endpoint never has streams, so the stream_id parameter is unused.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:08 -08:00
Hans de Goede
7e50e0bec4 uas: Avoid unnecessary unlock / lock calls around unlink_data_urbs
All callers of unlink_data_urbs drop devinfo->lock before calling it, and
then immediately take it again after the call. And the first thing
unlink_data_urbs does is take the lock again, and the last thing it does
is drop it. This commit removes all the unnecessary lock dropping and taking.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:08 -08:00
Hans de Goede
6ce8213b33 uas: Properly set interface to altsetting 0 on probe failure
- Rename labels to properly reflect this
- Don't skip free-ing the streams when scsi_init_shared_tag_map fails

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:07 -08:00
Hans de Goede
d5f808d3f8 uas: Urbs must be anchored before submitting them
Otherwise they may complete before they get anchored and thus never get
unanchored (as the unanchoring is done by the usb core on completion).

This commit also remove the usb_get_urb / usb_put_urb around cmd submission +
anchoring, since if done in the proper order this is not necessary.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:07 -08:00
Gerd Hoffmann
f491ecbb47 uas: replace BUG_ON() + WARN_ON() with WARN_ON_ONCE()
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2014-03-04 15:38:06 -08:00