Commit Graph

191 Commits

Author SHA1 Message Date
Linus Torvalds
f01ef569cd Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback: (27 commits)
  mm: properly reflect task dirty limits in dirty_exceeded logic
  writeback: don't busy retry writeback on new/freeing inodes
  writeback: scale IO chunk size up to half device bandwidth
  writeback: trace global_dirty_state
  writeback: introduce max-pause and pass-good dirty limits
  writeback: introduce smoothed global dirty limit
  writeback: consolidate variable names in balance_dirty_pages()
  writeback: show bdi write bandwidth in debugfs
  writeback: bdi write bandwidth estimation
  writeback: account per-bdi accumulated written pages
  writeback: make writeback_control.nr_to_write straight
  writeback: skip tmpfs early in balance_dirty_pages_ratelimited_nr()
  writeback: trace event writeback_queue_io
  writeback: trace event writeback_single_inode
  writeback: remove .nonblocking and .encountered_congestion
  writeback: remove writeback_control.more_io
  writeback: skip balance_dirty_pages() for in-memory fs
  writeback: add bdi_dirty_limit() kernel-doc
  writeback: avoid extra sync work at enqueue time
  writeback: elevate queue_io() into wb_writeback()
  ...

Fix up trivial conflicts in fs/fs-writeback.c and mm/filemap.c
2011-07-26 10:39:54 -07:00
Linus Torvalds
096a705bbc Merge branch 'for-3.1/core' of git://git.kernel.dk/linux-block
* 'for-3.1/core' of git://git.kernel.dk/linux-block: (24 commits)
  block: strict rq_affinity
  backing-dev: use synchronize_rcu_expedited instead of synchronize_rcu
  block: fix patch import error in max_discard_sectors check
  block: reorder request_queue to remove 64 bit alignment padding
  CFQ: add think time check for group
  CFQ: add think time check for service tree
  CFQ: move think time check variables to a separate struct
  fixlet: Remove fs_excl from struct task.
  cfq: Remove special treatment for metadata rqs.
  block: document blk_plug list access
  block: avoid building too big plug list
  compat_ioctl: fix make headers_check regression
  block: eliminate potential for infinite loop in blkdev_issue_discard
  compat_ioctl: fix warning caused by qemu
  block: flush MEDIA_CHANGE from drivers on close(2)
  blk-throttle: Make total_nr_queued unsigned
  block: Add __attribute__((format(printf...) and fix fallout
  fs/partitions/check.c: make local symbols static
  block:remove some spare spaces in genhd.c
  block:fix the comment error in blkdev.h
  ...
2011-07-25 10:33:36 -07:00
Josef Bacik
02c24a8218 fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers
Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers.  Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2.  For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:59 -04:00
Josef Bacik
06222e491e fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek
This converts everybody to handle SEEK_HOLE/SEEK_DATA properly.  In some cases
we just return -EINVAL, in others we do the normal generic thing, and in others
we're simply making sure that the properly due-dilligence is done.  For example
in NFS/CIFS we need to make sure the file size is update properly for the
SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself
that is all we have to do.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:58 -04:00
Tejun Heo
85ef06d1d2 block: flush MEDIA_CHANGE from drivers on close(2)
Currently, only open(2) is defined as the 'clearing' point.  It has
two roles - first, it's an acknowledgement from userland indicating
that the event has been received and kernel can clear pending states
and proceed to generate more events.  Secondly, it's passed on to
device drivers as a hint indicating that a synchronization point has
been reached and it might want to take a deeper look at the device.

The latter currently is only used by sr which uses two different
mechanisms - GET_EVENT_MEDIA_STATUS_NOTIFICATION and TEST_UNIT_READY
to discover events, where the former is lighter weight and safe to be
used repeatedly but may not provide full coverage.  Among other
things, GET_EVENT can't detect media removal while TUR can.

This patch makes close(2) - blkdev_put() - indicate clearing hint for
MEDIA_CHANGE to drivers.  disk_check_events() is renamed to
disk_flush_events() and updated to take @mask for events to flush
which is or'd to ev->clearing and will be passed to the driver on the
next ->check_events() invocation.

This change makes sr generate MEDIA_CHANGE when media is ejected from
userland - e.g. with eject(1).

Note: Given the current usage, it seems @clearing hint is needlessly
complex.  disk_clear_events() can simply clear all events and the hint
can be boolean @flush.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-01 16:17:47 +02:00
Tejun Heo
d4c208b86b block: use the passed in @bdev when claiming if partno is zero
6b4517a791 (block: implement bd_claiming and claiming block)
introduced claiming block to support O_EXCL blkdev opens properly.

bd_start_claiming() looks up the part 0 bdev and starts claiming
block.  The function assumed that there is only one part 0 bdev and
always used bdget_disk(disk, 0) to look it up; unfortunately, this
isn't true for some drivers (floppy) which use multiple block devices
to denote different operating parameters for the same physical device.
There can be multiple part 0 bdev's for the same device number.

This incorrect assumption caused the wrong bdev to be used during
claiming leading to unbalanced bd_holders as reported in the following
bug.

  https://bugzilla.kernel.org/show_bug.cgi?id=28522

This patch updates bd_start_claiming() such that it uses the bdev
specified as argument if its partno is zero.

Note that this means that different bdev's can be used for the same
device and O_EXCL check can be effectively bypassed.  It has always
been broken that way and floppy is fortunately on its way out.  Leave
that breakage alone.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Alex Villacis Lasso <avillaci@ceibo.fiec.espol.edu.ec>
Tested-by: Alex Villacis Lasso <avillaci@ceibo.fiec.espol.edu.ec>
Cc: stable@kernel.org	# >= v2.6.36
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-13 12:45:48 +02:00
Christoph Hellwig
f758eeabeb writeback: split inode_wb_list_lock into bdi_writeback.list_lock
Split the global inode_wb_list_lock into a per-bdi_writeback list_lock,
as it's currently the most contended lock in the system for metadata
heavy workloads.  It won't help for single-filesystem workloads for
which we'll need the I/O-less balance_dirty_pages, but at least we
can dedicate a cpu to spinning on each bdi now for larger systems.

Based on earlier patches from Nick Piggin and Dave Chinner.

It reduces lock contentions to 1/4 in this test case:
10 HDD JBOD, 100 dd on each disk, XFS, 6GB ram

lock_stat version 0.3
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
                              class name    con-bounces    contentions   waittime-min   waittime-max waittime-total    acq-bounces   acquisitions   holdtime-min   holdtime-max holdtime-total
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
vanilla 2.6.39-rc3:
                      inode_wb_list_lock:         42590          44433           0.12         147.74      144127.35         252274         886792           0.08         121.34      917211.23
                      ------------------
                      inode_wb_list_lock              2          [<ffffffff81165da5>] bdev_inode_switch_bdi+0x29/0x85
                      inode_wb_list_lock             34          [<ffffffff8115bd0b>] inode_wb_list_del+0x22/0x49
                      inode_wb_list_lock          12893          [<ffffffff8115bb53>] __mark_inode_dirty+0x170/0x1d0
                      inode_wb_list_lock          10702          [<ffffffff8115afef>] writeback_single_inode+0x16d/0x20a
                      ------------------
                      inode_wb_list_lock              2          [<ffffffff81165da5>] bdev_inode_switch_bdi+0x29/0x85
                      inode_wb_list_lock             19          [<ffffffff8115bd0b>] inode_wb_list_del+0x22/0x49
                      inode_wb_list_lock           5550          [<ffffffff8115bb53>] __mark_inode_dirty+0x170/0x1d0
                      inode_wb_list_lock           8511          [<ffffffff8115b4ad>] writeback_sb_inodes+0x10f/0x157

2.6.39-rc3 + patch:
                &(&wb->list_lock)->rlock:         11383          11657           0.14         151.69       40429.51          90825         527918           0.11         145.90      556843.37
                ------------------------
                &(&wb->list_lock)->rlock             10          [<ffffffff8115b189>] inode_wb_list_del+0x5f/0x86
                &(&wb->list_lock)->rlock           1493          [<ffffffff8115b1ed>] writeback_inodes_wb+0x3d/0x150
                &(&wb->list_lock)->rlock           3652          [<ffffffff8115a8e9>] writeback_sb_inodes+0x123/0x16f
                &(&wb->list_lock)->rlock           1412          [<ffffffff8115a38e>] writeback_single_inode+0x17f/0x223
                ------------------------
                &(&wb->list_lock)->rlock              3          [<ffffffff8110b5af>] bdi_lock_two+0x46/0x4b
                &(&wb->list_lock)->rlock              6          [<ffffffff8115b189>] inode_wb_list_del+0x5f/0x86
                &(&wb->list_lock)->rlock           2061          [<ffffffff8115af97>] __mark_inode_dirty+0x173/0x1cf
                &(&wb->list_lock)->rlock           2629          [<ffffffff8115a8e9>] writeback_sb_inodes+0x123/0x16f

hughd@google.com: fix recursive lock when bdi_lock_two() is called with new the same as old
akpm@linux-foundation.org: cleanup bdev_inode_switch_bdi() comment

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-06-08 08:25:21 +08:00
Tejun Heo
4c49ff3fe1 block: blkdev_get() should access ->bd_disk only after success
d4dc210f69 (block: don't block events on excl write for non-optical
devices) added dereferencing of bdev->bd_disk to test
GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE; however, bdev->bd_disk can be
%NULL if open failed which can lead to an oops.

Test the flag after testing open was successful, not before.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: David Miller <davem@davemloft.net>
Tested-by: David Miller <davem@davemloft.net>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-01 08:28:47 +02:00
Tejun Heo
7e69723fef block: move bd_set_size() above rescan_partitions() in __blkdev_get()
02e352287a (block: rescan partitions on invalidated devices on
-ENOMEDIA too) relocated partition rescan above explicit bd_set_size()
to simplify condition check.  As rescan_partitions() does its own bdev
size setting, this doesn't break anything; however,
rescan_partitions() prints out the following messages when adjusting
bdev size, which can be confusing.

  sda: detected capacity change from 0 to 146815737856
  sdb: detected capacity change from 0 to 146815737856

This patch restores the original order and remove the warning
messages.

stable: Please apply together with 02e352287a (block: rescan
        partitions on invalidated devices on -ENOMEDIA too).

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Tony Luck <tony.luck@gmail.com>
Tested-by: Tony Luck <tony.luck@gmail.com>
Cc: stable@kernel.org

Stable note: 2.6.39 only.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-23 13:26:07 +02:00
Tejun Heo
d4dc210f69 block: don't block events on excl write for non-optical devices
Disk event code automatically blocks events on excl write.  This is
primarily to avoid issuing polling commands while burning is in
progress.  This behavior doesn't fit other types of devices with
removeable media where polling commands don't have adverse side
effects and door locking usually doesn't exist.

This patch introduces new genhd flag which controls the auto-blocking
behavior and uses it to enable auto-blocking only on optical devices.

Note for stable: 2.6.38 and later only

Cc: stable@kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-21 20:54:46 +02:00
Tejun Heo
1196f8b814 block: rescan partitions on invalidated devices on -ENOMEDIA too
__blkdev_get() doesn't rescan partitions if disk->fops->open() fails,
which leads to ghost partition devices lingering after medimum removal
is known to both the kernel and userland.  The behavior also creates a
subtle inconsistency where O_NONBLOCK open, which doesn't fail even if
there's no medium, clears the ghots partitions, which is exploited to
work around the problem from userland.

Fix it by updating __blkdev_get() to issue partition rescan after
-ENOMEDIA too.

This was reported in the following bz.

 https://bugzilla.kernel.org/show_bug.cgi?id=13029

Note for stable: 2.6.38 and later only

Cc: stable@kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: David Zeuthen <zeuthen@gmail.com>
Reported-by: Martin Pitt <martin.pitt@ubuntu.com>
Reported-by: Kay Sievers <kay.sievers@vrfy.org>
Tested-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-21 20:54:45 +02:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds
d39dd11c3e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  fs: simplify iget & friends
  fs: pull inode->i_lock up out of writeback_single_inode
  fs: rename inode_lock to inode_hash_lock
  fs: move i_wb_list out from under inode_lock
  fs: move i_sb_list out from under inode_lock
  fs: remove inode_lock from iput_final and prune_icache
  fs: Lock the inode LRU list separately
  fs: factor inode disposal
  fs: protect inode->i_state with inode->i_lock
  autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd()
  autofs4 - remove autofs4_lock
  autofs4 - fix d_manage() return on rcu-walk
  autofs4 - fix autofs4_expire_indirect() traversal
  autofs4 - fix dentry leak in autofs4_expire_direct()
  autofs4 - reinstate last used update on access
  vfs - check non-mountpoint dentry might block in __follow_mount_rcu()
2011-03-24 19:01:30 -07:00
Dave Chinner
a66979abad fs: move i_wb_list out from under inode_lock
Protect the inode writeback list with a new global lock
inode_wb_list_lock and use it to protect the list manipulations and
traversals. This lock replaces the inode_lock as the inodes on the
list can be validity checked while holding the inode->i_lock and
hence the inode_lock is no longer needed to protect the list.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-24 21:17:51 -04:00
Dave Chinner
250df6ed27 fs: protect inode->i_state with inode->i_lock
Protect inode state transitions and validity checks with the
inode->i_lock. This enables us to make inode state transitions
independently of the inode_lock and is the first step to peeling
away the inode_lock from the code.

This requires that __iget() is done atomically with i_state checks
during list traversals so that we don't race with another thread
marking the inode I_FREEING between the state check and grabbing the
reference.

Also remove the unlock_new_inode() memory barrier optimisation
required to avoid taking the inode_lock when clearing I_NEW.
Simplify the code by simply taking the inode->i_lock around the
state change and wakeup. Because the wakeup is no longer tricky,
remove the wake_up_inode() function and open code the wakeup where
necessary.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-24 21:16:31 -04:00
Dan Carpenter
4345caba34 block: NULL dereference on error path in __blkdev_get()
"disk" is always NULL when we goto out.  There was a check for this
before, but it was removed in 69e02c59a7 "block: Don't check events
while open is in progress".

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@carl>
2011-03-19 13:53:31 +01:00
Jens Axboe
4c63f5646e Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/core
Conflicts:
	block/blk-core.c
	block/blk-flush.c
	drivers/md/raid1.c
	drivers/md/raid10.c
	drivers/md/raid5.c
	fs/nilfs2/btnode.c
	fs/nilfs2/mdt.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:58:35 +01:00
Jens Axboe
7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Tejun Heo
69e02c59a7 block: Don't check events while open is in progress
Not all block drivers clear events immediately after reporting.  Some
do so in ->revalidate_disk() or other steps during ->open().  There is
a slim chance event poll may happen between the clearing event check
from check_disk_change() and the actual clearing of the events which
would result in spurious events.

Block event checks while block device open is in progress.  There is
no need to kick explicit event check afterwards as events are always
checked during open.

-v2: The original patch could have called disk_unblock_events() with
     an already released or %NULL @disk causing oops.  Fixed by making
     sure references are put after disk_unblock_events() is called.
     It also makes the error path of __blkdev_get() a bit simpler.
     This problem was reported by Jens.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2011-03-09 19:54:27 +01:00
Tejun Heo
6936217cc7 block: Don't check events on close unless it was blocked
The block event mechanism currently always checks events when the
device is being closed regardless of the open mode.  The intention was
to allow detection of EJECT_REQUEST when a device is closed whether
disk event polling is enabled or not.

This is unnecessary as, for devices of interest, events are checked
from either userland or kernel and in the former case ->check_events()
is performed on open of each poll attempt anyway.  Furthermore, this
unconditional event check on close makes the code susceptible to event
loop if the block driver doesn't clear reported events correctly - an
event triggers userland to open and close the device which in turn
causes another event, rinse and repeat.

Check events on close only if it was blocked by excl write open.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2011-03-09 19:54:27 +01:00
Tejun Heo
facc31ddc3 block: Don't implicitly trigger event check on disk_unblock_events()
Currently, disk_unblock_events() implicitly kick event check if the
block count reaches zero.  This behavior is not described in the
comment and hinders with future changes.  Make the unblocker
explicitly check events by calling disk_check_events() as necessary.

This patch doesn't cause any behavior difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2011-03-09 19:54:27 +01:00
Randy Dunlap
e6eb5ce1b2 fs/block_dev.c: fix new kernel-doc warning
Fix new kernel-doc warning in fs/block_dev.c:

Warning(fs/block_dev.c:937): No description found for parameter 'kill_dirty'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-28 18:08:31 -08:00
Linus Torvalds
638691a7a4 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
  md: Fix - again - partition detection when array becomes active
  Fix over-zealous flush_disk when changing device size.
  md: avoid spinlock problem in blk_throtl_exit
  md: correctly handle probe of an 'mdp' device.
  md: don't set_capacity before array is active.
  md: Fix raid1->raid0 takeover
2011-02-25 11:13:26 -08:00
Tejun Heo
e7407d1619 block: bd_link_disk_holder() should hold on to holder_dir
The new implementation of bd_link_disk_holder() added by 49731baa41
(block: restore multiple bd_link_disk_holder() support) didn't get an
extra reference for the holder_dir kobject of the slave bdev; however,
bdev kills holder_dir on removal, not release, so if the slave bdev is
removed while there are holder links, the holder_dir will be destroyed
while there still are holder links, which leads to oops later when
bd_unlink_disk_order() tries to remove those links.

Make bd_link_disk_holder() grab an extra reference for the slave's
holder_dir and put it in bd_unlink_disk_holder().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@intel.com>
Tested-by: "Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@intel.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-24 08:55:55 -08:00
NeilBrown
93b270f76e Fix over-zealous flush_disk when changing device size.
There are two cases when we call flush_disk.
In one, the device has disappeared (check_disk_change) so any
data will hold becomes irrelevant.
In the oter, the device has changed size (check_disk_size_change)
so data we hold may be irrelevant.

In both cases it makes sense to discard any 'clean' buffers,
so they will be read back from the device if needed.

In the former case it makes sense to discard 'dirty' buffers
as there will never be anywhere safe to write the data.  In the
second case it *does*not* make sense to discard dirty buffers
as that will lead to file system corruption when you simply enlarge
the containing devices.

flush_disk calls __invalidate_devices.
__invalidate_device calls both invalidate_inodes and invalidate_bdev.

invalidate_inodes *does* discard I_DIRTY inodes and this does lead
to fs corruption.

invalidate_bev *does*not* discard dirty pages, but I don't really care
about that at present.

So this patch adds a flag to __invalidate_device (calling it
__invalidate_device2) to indicate whether dirty buffers should be
killed, and this is passed to invalidate_inodes which can choose to
skip dirty inodes.

flusk_disk then passes true from check_disk_change and false from
check_disk_size_change.

dm avoids tripping over this problem by calling i_size_write directly
rathher than using check_disk_size_change.

md does use check_disk_size_change and so is affected.

This regression was introduced by commit 608aeef17a which causes
check_disk_size_change to call flush_disk, so it is suitable for any
kernel since 2.6.27.

Cc: stable@kernel.org
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Andrew Patterson <andrew.patterson@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-24 17:25:47 +11:00
Chuck Ebbert
e51900f7d3 block: revert block_dev read-only check
This reverts commit 75f1dc0d07 ("block: check bdev_read_only() from
blkdev_get()").  That commit added stricter checking to make sure
devices that were being used read-only were actually opened in that
mode.

It turns out that the change breaks a bunch of kernel code that opens
block devices.  Affected systems include dm, md, and the loop device.
Because strict checking for read-only opens of block devices was not
done before this, the code that opens the devices was opening them
read-write even if they were being used read-only.  Auditing all that
code will take time, and new userspace packages for dm, mdadm, etc.
will also be required.

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-16 16:48:13 -08:00
Tejun Heo
49731baa41 block: restore multiple bd_link_disk_holder() support
Commit e09b457b (block: simplify holder symlink handling) incorrectly
assumed that there is only one link at maximum.  dm may use multiple
links and expects block layer to track reference count for each link,
which is different from and unrelated to the exclusive device holder
identified by @holder when the device is opened.

Remove the single holder assumption and automatic removal of the link
and revive the per-link reference count tracking.  The code
essentially behaves the same as before commit e09b457b sans the
unnecessary kobject reference count dancing.

While at it, note that this facility should not be used by anyone else
than the current ones.  Sysfs symlinks shouldn't be abused like this
and the whole thing doesn't belong in the block layer at all.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Milan Broz <mbroz@redhat.com>
Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Neil Brown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-14 18:44:22 +01:00
Linus Torvalds
275220f0fc Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
  block: ensure that completion error gets properly traced
  blktrace: add missing probe argument to block_bio_complete
  block cfq: don't use atomic_t for cfq_group
  block cfq: don't use atomic_t for cfq_queue
  block: trace event block fix unassigned field
  block: add internal hd part table references
  block: fix accounting bug on cross partition merges
  kref: add kref_test_and_get
  bio-integrity: mark kintegrityd_wq highpri and CPU intensive
  block: make kblockd_workqueue smarter
  Revert "sd: implement sd_check_events()"
  block: Clean up exit_io_context() source code.
  Fix compile warnings due to missing removal of a 'ret' variable
  fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
  block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
  cfq-iosched: don't check cfqg in choose_service_tree()
  fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
  cdrom: export cdrom_check_events()
  sd: implement sd_check_events()
  sr: implement sr_check_events()
  ...
2011-01-13 10:45:01 -08:00
Al Viro
c74a1cbb3c pass default dentry_operations to mount_pseudo()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-12 20:03:43 -05:00
Nick Piggin
fa0d7e3de6 fs: icache RCU free inodes
RCU free the struct inode. This will allow:

- Subsequent store-free path walking patch. The inode must be consulted for
  permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
  to take i_lock no longer need to take sb_inode_list_lock to walk the list in
  the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
  page lock to follow page->mapping.

The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.

In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.

The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:26 +11:00
Tejun Heo
77ea887e43 implement in-kernel gendisk events handling
Currently, media presence polling for removeable block devices is done
from userland.  There are several issues with this.

* Polling is done by periodically opening the device.  For SCSI
  devices, the command sequence generated by such action involves a
  few different commands including TEST_UNIT_READY.  This behavior,
  while perfectly legal, is different from Windows which only issues
  single command, GET_EVENT_STATUS_NOTIFICATION.  Unfortunately, some
  ATAPI devices lock up after being periodically queried such command
  sequences.

* There is no reliable and unintrusive way for a userland program to
  tell whether the target device is safe for media presence polling.
  For example, polling for media presence during an on-going burning
  session can make it fail.  The polling program can avoid this by
  opening the device with O_EXCL but then it risks making a valid
  exclusive user of the device fail w/ -EBUSY.

* Userland polling is unnecessarily heavy and in-kernel implementation
  is lighter and better coordinated (workqueue, timer slack).

This patch implements framework for in-kernel disk event handling,
which includes media presence polling.

* bdops->check_events() is added, which supercedes ->media_changed().
  It should check whether there's any pending event and return if so.
  Currently, two events are defined - DISK_EVENT_MEDIA_CHANGE and
  DISK_EVENT_EJECT_REQUEST.  ->check_events() is guaranteed not to be
  called parallelly.

* gendisk->events and ->async_events are added.  These should be
  initialized by block driver before passing the device to add_disk().
  The former contains the mask of all supported events and the latter
  the mask of all events which the device can report without polling.
  /sys/block/*/events[_async] export these to userland.

* Kernel parameter block.events_dfl_poll_msecs controls the system
  polling interval (default is 0 which means disable) and
  /sys/block/*/events_poll_msecs control polling intervals for
  individual devices (default is -1 meaning use system setting).  Note
  that if a device can report all supported events asynchronously and
  its polling interval isn't explicitly set, the device won't be
  polled regardless of the system polling interval.

* If a device is opened exclusively with write access, event checking
  is automatically disabled until all write exclusive accesses are
  released.

* There are event 'clearing' events.  For example, both of currently
  defined events are cleared after the device has been successfully
  opened.  This information is passed to ->check_events() callback
  using @clearing argument as a hint.

* Event checking is always performed from system_nrt_wq and timer
  slack is set to 25% for polling.

* Nothing changes for drivers which implement ->media_changed() but
  not ->check_events().  Going forward, all drivers will be converted
  to ->check_events() and ->media_change() will be dropped.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-16 17:53:38 +01:00
Arnd Bergmann
451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Tejun Heo
d4d7762995 block: clean up blkdev_get() wrappers and their users
After recent blkdev_get() modifications, open_by_devnum() and
open_bdev_exclusive() are simple wrappers around blkdev_get().
Replace them with blkdev_get_by_dev() and blkdev_get_by_path().

blkdev_get_by_dev() is identical to open_by_devnum().
blkdev_get_by_path() is slightly different in that it doesn't
automatically add %FMODE_EXCL to @mode.

All users are converted.  Most conversions are mechanical and don't
introduce any behavior difference.  There are several exceptions.

* btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no
  reason to OR it explicitly on blkdev_put().

* gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in
  sb->s_mode.

* With the above changes, sb->s_mode now always should contain
  FMODE_EXCL.  WARN_ON_ONCE() added to kill_block_super() to detect
  errors.

The new blkdev_get_*() functions are with proper docbook comments.
While at it, add function description to blkdev_get() too.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Joern Engel <joern@lazybastard.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: reiserfs-devel@vger.kernel.org
Cc: xfs-masters@oss.sgi.com
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-11-13 11:55:18 +01:00
Tejun Heo
75f1dc0d07 block: check bdev_read_only() from blkdev_get()
bdev read-only status can be queried using bdev_read_only() and may
change while the device is being opened.  Enforce it by checking it
from blkdev_get() after open succeeds.

This makes bdev_read_only() check in open_bdev_exclusive() and
fsg_lun_open() unnecessary.  Drop them.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: linux-usb@vger.kernel.org
2010-11-13 11:55:17 +01:00
Tejun Heo
6a027eff62 block: reorganize claim/release implementation
With claim/release rolled into blkdev_get/put(), there's no reason to
keep bd_abort/finish_claim(), __bd_claim() and bd_release() as
separate functions.  It only makes the code difficult to follow.
Collapse them into blkdev_get/put().  This will ease future changes
around claim/release.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-11-13 11:55:17 +01:00
Tejun Heo
e525fd89d3 block: make blkdev_get/put() handle exclusive access
Over time, block layer has accumulated a set of APIs dealing with bdev
open, close, claim and release.

* blkdev_get/put() are the primary open and close functions.

* bd_claim/release() deal with exclusive open.

* open/close_bdev_exclusive() are combination of open and claim and
  the other way around, respectively.

* bd_link/unlink_disk_holder() to create and remove holder/slave
  symlinks.

* open_by_devnum() wraps bdget() + blkdev_get().

The interface is a bit confusing and the decoupling of open and claim
makes it impossible to properly guarantee exclusive access as
in-kernel open + claim sequence can disturb the existing exclusive
open even before the block layer knows the current open if for another
exclusive access.  Reorganize the interface such that,

* blkdev_get() is extended to include exclusive access management.
  @holder argument is added and, if is @FMODE_EXCL specified, it will
  gain exclusive access atomically w.r.t. other exclusive accesses.

* blkdev_put() is similarly extended.  It now takes @mode argument and
  if @FMODE_EXCL is set, it releases an exclusive access.  Also, when
  the last exclusive claim is released, the holder/slave symlinks are
  removed automatically.

* bd_claim/release() and close_bdev_exclusive() are no longer
  necessary and either made static or removed.

* bd_link_disk_holder() remains the same but bd_unlink_disk_holder()
  is no longer necessary and removed.

* open_bdev_exclusive() becomes a simple wrapper around lookup_bdev()
  and blkdev_get().  It also has an unexpected extra bdev_read_only()
  test which probably should be moved into blkdev_get().

* open_by_devnum() is modified to take @holder argument and pass it to
  blkdev_get().

Most of bdev open/close operations are unified into blkdev_get/put()
and most exclusive accesses are tested atomically at the open time (as
it should).  This cleans up code and removes some, both valid and
invalid, but unnecessary all the same, corner cases.

open_bdev_exclusive() and open_by_devnum() can use further cleanup -
rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop
special features.  Well, let's leave them for another day.

Most conversions are straight-forward.  drbd conversion is a bit more
involved as there was some reordering, but the logic should stay the
same.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: dm-devel@redhat.com
Cc: drbd-dev@lists.linbit.com
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Joern Engel <joern@logfs.org>
Cc: reiserfs-devel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-11-13 11:55:17 +01:00
Tejun Heo
e09b457bdb block: simplify holder symlink handling
Code to manage symlinks in /sys/block/*/{holders|slaves} are overly
complex with multiple holder considerations, redundant extra
references to all involved kobjects, unused generic kobject holder
support and unnecessary mixup with bd_claim/release functionalities.

Strip it down to what's necessary (single gendisk holder) and make it
use a separate interface.  This is a step for cleaning up
bd_claim/release.  This patch makes dm-table slightly more complex but
it will be simplified again with further changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
2010-11-13 11:55:17 +01:00
Al Viro
51139adac9 convert get_sb_pseudo() users
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:33 -04:00
Nick Piggin
7ccf19a804 fs: inode split IO and LRU lists
The use of the same inode list structure (inode->i_list) for two
different list constructs with different lifecycles and purposes
makes it impossible to separate the locking of the different
operations. Therefore, to enable the separation of the locking of
the writeback and reclaim lists, split the inode->i_list into two
separate lists dedicated to their specific tracking functions.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:15 -04:00
Dave Chinner
a5491e0c7b fs: switch bdev inode bdi's correctly
bdev inodes can remain dirty even after their last close. Hence the
BDI associated with the bdev->inode gets modified duringthe last
close to point to the default BDI. However, the bdev inode still
needs to be moved to the dirty lists of the new BDI, otherwise it
will corrupt the writeback list is was left on.

Add a new function bdev_inode_switch_bdi() to move all the bdi state
from the old bdi to the new one safely. This is only a temporary
measure until the bdev inode<->bdi lifecycle problems are sorted
out.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:14 -04:00
Al Viro
7de9c6ee3e new helper: ihold()
Clones an existing reference to inode; caller must already hold one.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:11 -04:00
Christoph Hellwig
dd3932eddf block: remove BLKDEV_IFL_WAIT
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller.  To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead.  So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout.  For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 20:52:58 +02:00
Chris Wright
b7300b78d1 blkdev: cgroup whitelist permission fix
The cgroup device whitelist code gets confused when trying to grant
permission to a disk partition that is not currently open.  Part of
blkdev_open() includes __blkdev_get() on the whole disk.

Basically, the only ways to reliably allow a cgroup access to a partition
on a block device when using the whitelist are to 1) also give it access
to the whole block device or 2) make sure the partition is already open in
a different context.

The patch avoids the cgroup check for the whole disk case when opening a
partition.

Addresses https://bugzilla.redhat.com/show_bug.cgi?id=589662

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Tested-by: Serge E. Hallyn <serue@us.ibm.com>
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:18 -07:00
Linus Torvalds
2f9e825d3e Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
  block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
  xen-blkfront: fix missing out label
  blkdev: fix blkdev_issue_zeroout return value
  block: update request stacking methods to support discards
  block: fix missing export of blk_types.h
  writeback: fix bad _bh spinlock nesting
  drbd: revert "delay probes", feature is being re-implemented differently
  drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
  drbd: Disable delay probes for the upcomming release
  writeback: cleanup bdi_register
  writeback: add new tracepoints
  writeback: remove unnecessary init_timer call
  writeback: optimize periodic bdi thread wakeups
  writeback: prevent unnecessary bdi threads wakeups
  writeback: move bdi threads exiting logic to the forker thread
  writeback: restructure bdi forker loop a little
  writeback: move last_active to bdi
  writeback: do not remove bdi from bdi_list
  writeback: simplify bdi code a little
  writeback: do not lose wake-ups in bdi threads
  ...

Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
2010-08-10 15:22:42 -07:00
Linus Torvalds
5f248c9c25 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
  no need for list_for_each_entry_safe()/resetting with superblock list
  Fix sget() race with failing mount
  vfs: don't hold s_umount over close_bdev_exclusive() call
  sysv: do not mark superblock dirty on remount
  sysv: do not mark superblock dirty on mount
  btrfs: remove junk sb_dirt change
  BFS: clean up the superblock usage
  AFFS: wait for sb synchronization when needed
  AFFS: clean up dirty flag usage
  cifs: truncate fallout
  mbcache: fix shrinker function return value
  mbcache: Remove unused features
  add f_flags to struct statfs(64)
  pass a struct path to vfs_statfs
  update VFS documentation for method changes.
  All filesystems that need invalidate_inode_buffers() are doing that explicitly
  convert remaining ->clear_inode() to ->evict_inode()
  Make ->drop_inode() just return whether inode needs to be dropped
  fs/inode.c:clear_inode() is gone
  fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
  ...

Fix up trivial conflicts in fs/nilfs2/super.c
2010-08-10 11:26:52 -07:00
Al Viro
b57922d97f convert remaining ->clear_inode() to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:48:37 -04:00
Christoph Hellwig
155130a4f7 get rid of block_write_begin_newtrunc
Move the call to vmtruncate to get rid of accessive blocks to the callers
in preparation of the new truncate sequence and rename the non-truncating
version to block_write_begin.

While we're at it also remove several unused arguments to block_write_begin.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:33 -04:00
Christoph Hellwig
eafdc7d190 sort out blockdev_direct_IO variants
Move the call to vmtruncate to get rid of accessive blocks to the callers
in prepearation of the new truncate calling sequence.  This was only done
for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant
was not needed anyway.  Get rid of blockdev_direct_IO_no_locking and
its _newtrunc variant while at it as just opencoding the two additional
paramters is shorted than the name suffix.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:29 -04:00
Arnd Bergmann
6e9624b8ca block: push down BKL into .open and .release
The open and release block_device_operations are currently
called with the BKL held. In order to change that, we must
first make sure that all drivers that currently rely
on this have no regressions.

This blindly pushes the BKL into all .open and .release
operations for all block drivers to prepare for the
next step. The drivers can subsequently replace the BKL
with their own locks or remove it completely when it can
be shown that it is not needed.

The functions blkdev_get and blkdev_put are the only
remaining users of the big kernel lock in the block
layer, besides a few uses in the ioctl code, none
of which need to serialize with blkdev_{get,put}.

Most of these two functions is also under the protection
of bdev->bd_mutex, including the actual calls to
->open and ->release, and the common code does not
access any global data structures that need the BKL.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:25:34 +02:00
Tejun Heo
e75aa85892 block_dev: always serialize exclusive open attempts
bd_prepare_to_claim() incorrectly allowed multiple attempts for
exclusive open to progress in parallel if the attempting holders are
identical.  This triggered BUG_ON() as reported in the following bug.

  https://bugzilla.kernel.org/show_bug.cgi?id=16393

__bd_abort_claiming() is used to finish claiming blocks and doesn't
work if multiple openers are inside a claiming block.  Allowing
multiple parallel open attempts to continue doesn't gain anything as
those are serialized down in the call chain anyway.  Fix it by always
allowing only single open attempt in a claiming block.

This problem can easily be reproduced by adding a delay after
bd_prepare_to_claim() and attempting to mount two partitions of a
disk.

stable: only applicable to v2.6.35

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-04 11:17:10 -07:00