In struct page we have enough space to fit long-size page->ptl there,
but we use dynamically-allocated page->ptl if size(spinlock_t) is larger
than sizeof(int).
It hurts 64-bit architectures with CONFIG_GENERIC_LOCKBREAK, where
sizeof(spinlock_t) == 8, but it easily fits into struct page.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The problem is that the profiler only initializes the online
CPUs, and not possible CPUs. This causes issues if the user takes
CPUs online or offline while the profiler is running.
If we online a CPU after starting the profiler, we lose all the
trace information on the CPU going online.
If we offline a CPU after running a test and start a new test, it
will not clear the old data from that CPU.
This bug causes incorrect data to be reported to the user if they
online or offline CPUs during the profiling.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSsNBHAAoJEKQekfcNnQGuKP8H/2mol/d7z2vANh7/FeNjTKIN
VkRzDEwUIwoaJBsL75EDDXBFx7w8jjAsXyoTrqrvMRV4UNcsfm46mohQTPAmK39y
muqodL1VnVXdKrUmtw/1nL7yDi2KltQH1UwOgvwXGuUFIq5cuCXNQxNK9/1fVVVn
tIMNz5kEAG3XCwnqP0PgQxWCuA7s+aQR0ijTf4vPf1G3IJujPyG9VhJWcGS3dJTR
t8TPyatd9D/S+7/r7iZ9hS8nWpaka3qJfhiWqk16SC9LiUXVA8oFOVMoN7n6Co5E
6r2dNo01WOABlojCxi1t3afUtcV1bUjBnVkiDva5cSc84pQSxe1qRrIpjTmHk00=
=MSZs
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"This fixes a long standing bug in the ftrace profiler. The problem is
that the profiler only initializes the online CPUs, and not possible
CPUs. This causes issues if the user takes CPUs online or offline
while the profiler is running.
If we online a CPU after starting the profiler, we lose all the trace
information on the CPU going online.
If we offline a CPU after running a test and start a new test, it will
not clear the old data from that CPU.
This bug causes incorrect data to be reported to the user if they
online or offline CPUs during the profiling"
* tag 'trace-fixes-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Initialize the ftrace profiler for each possible cpu
Pull perf fixes from Ingo Molnar:
"An ABI documentation fix, and a mixed-PMU perf-info-corruption fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Document the new transaction sample type
perf: Disable all pmus on unthrottling and rescheduling
Merge patches from Andrew Morton:
"23 fixes and a MAINTAINERS update"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits)
mm/hugetlb: check for pte NULL pointer in __page_check_address()
fix build with make 3.80
mm/mempolicy: fix !vma in new_vma_page()
MAINTAINERS: add Davidlohr as GPT maintainer
mm/memory-failure.c: recheck PageHuge() after hugetlb page migrate successfully
mm/compaction: respect ignore_skip_hint in update_pageblock_skip
mm/mempolicy: correct putback method for isolate pages if failed
mm: add missing dependency in Kconfig
sh: always link in helper functions extracted from libgcc
mm: page_alloc: exclude unreclaimable allocations from zone fairness policy
mm: numa: defer TLB flush for THP migration as long as possible
mm: numa: guarantee that tlb_flush_pending updates are visible before page table updates
mm: fix TLB flush race between migration, and change_protection_range
mm: numa: avoid unnecessary disruption of NUMA hinting during migration
mm: numa: clear numa hinting information on mprotect
sched: numa: skip inaccessible VMAs
mm: numa: avoid unnecessary work on the failure path
mm: numa: ensure anon_vma is locked to prevent parallel THP splits
mm: numa: do not clear PTE for pte_numa update
mm: numa: do not clear PMD during PTE update scan
...
There are a few subtle races, between change_protection_range (used by
mprotect and change_prot_numa) on one side, and NUMA page migration and
compaction on the other side.
The basic race is that there is a time window between when the PTE gets
made non-present (PROT_NONE or NUMA), and the TLB is flushed.
During that time, a CPU may continue writing to the page.
This is fine most of the time, however compaction or the NUMA migration
code may come in, and migrate the page away.
When that happens, the CPU may continue writing, through the cached
translation, to what is no longer the current memory location of the
process.
This only affects x86, which has a somewhat optimistic pte_accessible.
All other architectures appear to be safe, and will either always flush,
or flush whenever there is a valid mapping, even with no permissions
(SPARC).
The basic race looks like this:
CPU A CPU B CPU C
load TLB entry
make entry PTE/PMD_NUMA
fault on entry
read/write old page
start migrating page
change PTE/PMD to new page
read/write old page [*]
flush TLB
reload TLB from new entry
read/write new page
lose data
[*] the old page may belong to a new user at this point!
The obvious fix is to flush remote TLB entries, by making sure that
pte_accessible aware of the fact that PROT_NONE and PROT_NUMA memory may
still be accessible if there is a TLB flush pending for the mm.
This should fix both NUMA migration and compaction.
[mgorman@suse.de: fix build]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Inaccessible VMA should not be trapping NUMA hint faults. Skip them.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 1b3a5d02ee ("reboot: move arch/x86 reboot= handling to generic
kernel") moved reboot= handling to generic code. In the process it also
removed the code in native_machine_shutdown() which are moving reboot
process to reboot_cpu/cpu0.
I guess that thought must have been that all reboot paths are calling
migrate_to_reboot_cpu(), so we don't need this special handling. But
kexec reboot path (kernel_kexec()) is not calling
migrate_to_reboot_cpu() so above change broke kexec. Now reboot can
happen on non-boot cpu and when INIT is sent in second kerneo to bring
up BP, it brings down the machine.
So start calling migrate_to_reboot_cpu() in kexec reboot path to avoid
this problem.
Bisected by WANG Chao.
Reported-by: Matthew Whitehead <mwhitehe@redhat.com>
Reported-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Tested-by: Baoquan He <bhe@redhat.com>
Tested-by: WANG Chao <chaowang@redhat.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto key patches from David Howells:
"There are four items:
- A patch to fix X.509 certificate gathering. The problem was that I
was coming up with a different path for signing_key.x509 in the
build directory if it didn't exist to if it did exist. This meant
that the X.509 cert container object file would be rebuilt on the
second rebuild in a build directory and the kernel would get
relinked.
- Unconditionally remove files generated by SYSTEM_TRUSTED_KEYRING=y
when doing make mrproper.
- Actually initialise the persistent-keyring semaphore for
init_user_ns. I have no idea why this works at all for users in
the base user namespace unless it's something to do with systemd
containerising the system.
- Documentation for module signing"
* 'keys-devel' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
Add Documentation/module-signing.txt file
KEYS: fix uninitialized persistent_keyring_register_sem
KEYS: Remove files generated when SYSTEM_TRUSTED_KEYRING=y
X.509: Fix certificate gathering
Pull scheduler fixes from Ingo Molnar:
"Three fixes for scheduler crashes, each triggers in relatively rare,
hardware environment dependent situations"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Rework sched_fair time accounting
math64: Add mul_u64_u32_shr()
sched: Remove PREEMPT_NEED_RESCHED from generic code
sched: Initialize power_orig for overlapping groups
This patch touches the RT group scheduling case.
Functions inc_rt_prio_smp() and dec_rt_prio_smp() change (global) rq's
priority, while rt_rq passed to them may be not the top-level rt_rq.
This is wrong, because changing of priority on a child level does not
guarantee that the priority is the highest all over the rq. So, this
leak makes RT balancing unusable.
The short example: the task having the highest priority among all rq's
RT tasks (no one other task has the same priority) are waking on a
throttle rt_rq. The rq's cpupri is set to the task's priority
equivalent, but real rq->rt.highest_prio.curr is less.
The patch below fixes the problem.
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/49231385567953@web4m.yandex.ru
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 42eb088e (sched: Avoid NULL dereference on sd_busy) corrected a NULL
dereference on sd_busy but the fix also altered what scheduling domain it
used for the 'sd_llc' percpu variable.
One impact of this is that a task selecting a runqueue may consider
idle CPUs that are not cache siblings as candidates for running.
Tasks are then running on CPUs that are not cache hot.
This was found through bisection where ebizzy threads were not seeing equal
performance and it looked like a scheduling fairness issue. This patch
mitigates but does not completely fix the problem on all machines tested
implying there may be an additional bug or a common root cause. Here are
the average range of performance seen by individual ebizzy threads. It
was tested on top of candidate patches related to x86 TLB range flushing.
4-core machine
3.13.0-rc3 3.13.0-rc3
vanilla fixsd-v3r3
Mean 1 0.00 ( 0.00%) 0.00 ( 0.00%)
Mean 2 0.34 ( 0.00%) 0.10 ( 70.59%)
Mean 3 1.29 ( 0.00%) 0.93 ( 27.91%)
Mean 4 7.08 ( 0.00%) 0.77 ( 89.12%)
Mean 5 193.54 ( 0.00%) 2.14 ( 98.89%)
Mean 6 151.12 ( 0.00%) 2.06 ( 98.64%)
Mean 7 115.38 ( 0.00%) 2.04 ( 98.23%)
Mean 8 108.65 ( 0.00%) 1.92 ( 98.23%)
8-core machine
Mean 1 0.00 ( 0.00%) 0.00 ( 0.00%)
Mean 2 0.40 ( 0.00%) 0.21 ( 47.50%)
Mean 3 23.73 ( 0.00%) 0.89 ( 96.25%)
Mean 4 12.79 ( 0.00%) 1.04 ( 91.87%)
Mean 5 13.08 ( 0.00%) 2.42 ( 81.50%)
Mean 6 23.21 ( 0.00%) 69.46 (-199.27%)
Mean 7 15.85 ( 0.00%) 101.72 (-541.77%)
Mean 8 109.37 ( 0.00%) 19.13 ( 82.51%)
Mean 12 124.84 ( 0.00%) 28.62 ( 77.07%)
Mean 16 113.50 ( 0.00%) 24.16 ( 78.71%)
It's eliminated for one machine and reduced for another.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: H Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131217092124.GV11295@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, only one PMU in a context gets disabled during unthrottling
and event_sched_{out,in}(), however, events in one context may belong to
different pmus, which results in PMUs being reprogrammed while they are
still enabled.
This means that mixed PMU use [which is rare in itself] resulted in
potentially completely unreliable results: corrupted events, bogus
results, etc.
This patch temporarily disables PMUs that correspond to
each event in the context while these events are being modified.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: http://lkml.kernel.org/r/1387196256-8030-1-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ftrace currently initializes only the online CPUs. This implementation has
two problems:
- If we online a CPU after we enable the function profile, and then run the
test, we will lose the trace information on that CPU.
Steps to reproduce:
# echo 0 > /sys/devices/system/cpu/cpu1/online
# cd <debugfs>/tracing/
# echo <some function name> >> set_ftrace_filter
# echo 1 > function_profile_enabled
# echo 1 > /sys/devices/system/cpu/cpu1/online
# run test
- If we offline a CPU before we enable the function profile, we will not clear
the trace information when we enable the function profile. It will trouble
the users.
Steps to reproduce:
# cd <debugfs>/tracing/
# echo <some function name> >> set_ftrace_filter
# echo 1 > function_profile_enabled
# run test
# cat trace_stat/function*
# echo 0 > /sys/devices/system/cpu/cpu1/online
# echo 0 > function_profile_enabled
# echo 1 > function_profile_enabled
# cat trace_stat/function*
# run test
# cat trace_stat/function*
So it is better that we initialize the ftrace profiler for each possible cpu
every time we enable the function profile instead of just the online ones.
Link: http://lkml.kernel.org/r/1387178401-10619-1-git-send-email-miaox@cn.fujitsu.com
Cc: stable@vger.kernel.org # 2.6.31+
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix the gathering of certificates from both the source tree and the build tree
to correctly calculate the pathnames of all the certificates.
The problem was that if the default generated cert, signing_key.x509, didn't
exist then it would not have a path attached and if it did, it would have a
path attached.
This means that the contents of kernel/.x509.list would change between the
first compilation in a directory and the second. After the second it would
remain stable because the signing_key.x509 file exists.
The consequence was that the kernel would get relinked unconditionally on the
second recompilation. The second recompilation would also show something like
this:
X.509 certificate list changed
CERTS kernel/x509_certificate_list
- Including cert /home/torvalds/v2.6/linux/signing_key.x509
AS kernel/system_certificates.o
LD kernel/built-in.o
which is why the relink would happen.
Unfortunately, it isn't a simple matter of just sticking a path on the front
of the filename of the certificate in the build directory as make can't then
work out how to build it.
So the path has to be prepended to the name for sorting and duplicate
elimination and then removed for the make rule if it is in the build tree.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=/AdA
-----END PGP SIGNATURE-----
Merge tag 'keys-devel-20131210' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull misc keyrings fixes from David Howells:
"These break down into five sets:
- A patch to error handling in the big_key type for huge payloads.
If the payload is larger than the "low limit" and the backing store
allocation fails, then big_key_instantiate() doesn't clear the
payload pointers in the key, assuming them to have been previously
cleared - but only one of them is.
Unfortunately, the garbage collector still calls big_key_destroy()
when sees one of the pointers with a weird value in it (and not
NULL) which it then tries to clean up.
- Three patches to fix the keyring type:
* A patch to fix the hash function to correctly divide keyrings off
from keys in the topology of the tree inside the associative
array. This is only a problem if searching through nested
keyrings - and only if the hash function incorrectly puts the a
keyring outside of the 0 branch of the root node.
* A patch to fix keyrings' use of the associative array. The
__key_link_begin() function initially passes a NULL key pointer
to assoc_array_insert() on the basis that it's holding a place in
the tree whilst it does more allocation and stuff.
This is only a problem when a node contains 16 keys that match at
that level and we want to add an also matching 17th. This should
easily be manufactured with a keyring full of keyrings (without
chucking any other sort of key into the mix) - except for (a)
above which makes it on average adding the 65th keyring.
* A patch to fix searching down through nested keyrings, where any
keyring in the set has more than 16 keyrings and none of the
first keyrings we look through has a match (before the tree
iteration needs to step to a more distal node).
Test in keyutils test suite:
http://git.kernel.org/cgit/linux/kernel/git/dhowells/keyutils.git/commit/?id=8b4ae963ed92523aea18dfbb8cab3f4979e13bd1
- A patch to fix the big_key type's use of a shmem file as its
backing store causing audit messages and LSM check failures. This
is done by setting S_PRIVATE on the file to avoid LSM checks on the
file (access to the shmem file goes through the keyctl() interface
and so is gated by the LSM that way).
This isn't normally a problem if a key is used by the context that
generated it - and it's currently only used by libkrb5.
Test in keyutils test suite:
http://git.kernel.org/cgit/linux/kernel/git/dhowells/keyutils.git/commit/?id=d9a53cbab42c293962f2f78f7190253fc73bd32e
- A patch to add a generated file to .gitignore.
- A patch to fix the alignment of the system certificate data such
that it it works on s390. As I understand it, on the S390 arch,
symbols must be 2-byte aligned because loading the address discards
the least-significant bit"
* tag 'keys-devel-20131210' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
KEYS: correct alignment of system_certificate_list content in assembly file
Ignore generated file kernel/x509_certificate_list
security: shmem: implement kernel private shmem inodes
KEYS: Fix searching of nested keyrings
KEYS: Fix multiple key add into associative array
KEYS: Fix the keyring hash function
KEYS: Pre-clear struct key on allocation
When debugging the read-only hugepage case, I was confused by the fact
that get_futex_key() did an access_ok() only for the non-shared futex
case, since the user address checking really isn't in any way specific
to the private key handling.
Now, it turns out that the shared key handling does effectively do the
equivalent checks inside get_user_pages_fast() (it doesn't actually
check the address range on x86, but does check the page protections for
being a user page). So it wasn't actually a bug, but the fact that we
treat the address differently for private and shared futexes threw me
for a loop.
Just move the check up, so that it gets done for both cases. Also, use
the 'rw' parameter for the type, even if it doesn't actually matter any
more (it's a historical artifact of the old racy i386 "page faults from
kernel space don't check write protections").
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The hugepage code had the exact same bug that regular pages had in
commit 7485d0d375 ("futexes: Remove rw parameter from
get_futex_key()").
The regular page case was fixed by commit 9ea71503a8 ("futex: Fix
regression with read only mappings"), but the transparent hugepage case
(added in a5b338f2b0: "thp: update futex compound knowledge") case
remained broken.
Found by Dave Jones and his trinity tool.
Reported-and-tested-by: Dave Jones <davej@fedoraproject.org>
Cc: stable@kernel.org # v2.6.38+
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christian suffers from a bad BIOS that wrecks his i5's TSC sync. This
results in him occasionally seeing time going backwards - which
crashes the scheduler ...
Most of our time accounting can actually handle that except the most
common one; the tick time update of sched_fair.
There is a further problem with that code; previously we assumed that
because we get a tick every TICK_NSEC our time delta could never
exceed 32bits and math was simpler.
However, ever since Frederic managed to get NO_HZ_FULL merged; this is
no longer the case since now a task can run for a long time indeed
without getting a tick. It only takes about ~4.2 seconds to overflow
our u32 in nanoseconds.
This means we not only need to better deal with time going backwards;
but also means we need to be able to deal with large deltas.
This patch reworks the entire code and uses mul_u64_u32_shr() as
proposed by Andy a long while ago.
We express our virtual time scale factor in a u32 multiplier and shift
right and the 32bit mul_u64_u32_shr() implementation reduces to a
single 32x32->64 multiply if the time delta is still short (common
case).
For 64bit a 64x64->128 multiply can be used if ARCH_SUPPORTS_INT128.
Reported-and-Tested-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: fweisbec@gmail.com
Cc: Paul Turner <pjt@google.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131118172706.GI3866@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yinghai reported that he saw a /0 in sg_capacity on his EX parts.
Make sure to always initialize power_orig now that we actually use it.
Ideally build_sched_domains() -> init_sched_groups_power() would also
initialize this; but for some yet unexplained reason some setups seem
to miss updates there.
Reported-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-l8ng2m9uml6fhibln8wqpom7@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Apart from data-type specific alignment constraints, there are also
architecture-specific alignment requirements.
For example, on s390 symbols must be on even addresses implying a 2-byte
alignment. If the system_certificate_list_end symbol is on an odd address
and if this address is loaded, the least-significant bit is ignored. As a
result, the load_system_certificate_list() fails to load the certificates
because of a wrong certificate length calculation.
To be safe, align system_certificate_list on an 8-byte boundary. Also improve
the length calculation of the system_certificate_list content. Introduce a
system_certificate_list_size (8-byte aligned because of unsigned long) variable
that stores the length. Let the linker calculate this size by introducing
a start and end label for the certificate content.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
$ git status
# On branch pending-rebases
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# kernel/x509_certificate_list
nothing added to commit but untracked files present (use "git add" to track)
$
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Add a flag to tell the PCI subsystem that kernel is shutting down in
preparation to kexec a kernel. Add code in PCI subsystem to use this flag
to clear Bus Master bit on PCI devices only in case of kexec reboot.
This fixes a power-off problem on Acer Aspire V5-573G and likely other
machines and avoids any other issues caused by clearing Bus Master bit on
PCI devices in normal shutdown path. The problem was introduced by
b566a22c23 ("PCI: disable Bus Master on PCI device shutdown").
This patch is based on discussion at
http://marc.info/?l=linux-pci&m=138425645204355&w=2
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63861
Reported-by: Chang Liu <cl91tp@gmail.com>
Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: stable@vger.kernel.org # v3.5+
all events. This was prevalent when FTRACE_SELFTEST was enabled which
enables all events several times, and caused the system bootup to
pause for over a minute.
This was tracked down to an addition of a synchronize_sched() performed
when system call tracepoints are unregistered.
The synchronize_sched() is needed between the unregistering of the
system call tracepoint and a deletion of a tracing instance buffer.
But placing the synchronize_sched() in the unreg of *every* system call
tracepoint is a bit overboard. A single synchronize_sched() before
the deletion of the instance is sufficient.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSofYNAAoJEKQekfcNnQGuTUcIAJOx8745KlkFjN4VX+nCWNfP
xrrpnLBymbGMA9lQ4fXk+kdiuhH8DjRYdKq9fU4T481MFYKkToUIZH6NeaLI5fr1
0nBPPjVyAlJ+yt9JbOAYa1jEYnAr27ORDHEtdQnqb6OJSky3oh9jCQi+toxmh2qX
Sv1tIYeAf3K2V/h5xt6uSl9oiZ6KBtwE3f+xkHWNizaU9i2rq2gxd77fSbPNTIps
wLdsESYziA2UeAm13eh8xXo1uqRbfvx7bPr59cu0+3AqdOoaXFG+JoE/MqmljIO5
HkyCKJVqP8HD+QieuEB+hw4zpSsl6A6iKSlaiHm8NMnRRocfM6qMKMQXQ28KhxA=
=sYm/
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"A regression showed up that there's a large delay when enabling all
events. This was prevalent when FTRACE_SELFTEST was enabled which
enables all events several times, and caused the system bootup to
pause for over a minute.
This was tracked down to an addition of a synchronize_sched()
performed when system call tracepoints are unregistered.
The synchronize_sched() is needed between the unregistering of the
system call tracepoint and a deletion of a tracing instance buffer.
But placing the synchronize_sched() in the unreg of *every* system
call tracepoint is a bit overboard. A single synchronize_sched()
before the deletion of the instance is sufficient"
* tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Only run synchronize_sched() at instance deletion time
It has been reported that boot up with FTRACE_SELFTEST enabled can take a
very long time. There can be stalls of over a minute.
This was tracked down to the synchronize_sched() called when a system call
event is disabled. As the self tests enable and disable thousands of events,
this makes the synchronize_sched() get called thousands of times.
The synchornize_sched() was added with d562aff93b "tracing: Add support
for SOFT_DISABLE to syscall events" which caused this regression (added
in 3.13-rc1).
The synchronize_sched() is to protect against the events being accessed
when a tracer instance is being deleted. When an instance is being deleted
all the events associated to it are unregistered. The synchronize_sched()
makes sure that no more users are running when it finishes.
Instead of calling synchronize_sched() for all syscall events, we only
need to call it once, after the events are unregistered and before the
instance is deleted. The event_mutex is held during this action to
prevent new users from enabling events.
Link: http://lkml.kernel.org/r/20131203124120.427b9661@gandalf.local.home
Reported-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Petr Mladek <pmladek@suse.cz>
Tested-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull timer fixes from Thomas Gleixner:
- timekeeping: Cure a subtle drift issue on GENERIC_TIME_VSYSCALL_OLD
- nohz: Make CONFIG_NO_HZ=n and nohz=off command line option behave the
same way. Fixes a long standing load accounting wreckage.
- clocksource/ARM: Kconfig update to avoid ARM=n wreckage
- clocksource/ARM: Fixlets for the AT91 and SH clocksource/clockevents
- Trivial documentation update and kzalloc conversion from akpms pile
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
nohz: Fix another inconsistency between CONFIG_NO_HZ=n and nohz=off
time: Fix 1ns/tick drift w/ GENERIC_TIME_VSYSCALL_OLD
clocksource: arm_arch_timer: Hide eventstream Kconfig on non-ARM
clocksource: sh_tmu: Add clk_prepare/unprepare support
clocksource: sh_tmu: Release clock when sh_tmu_register() fails
clocksource: sh_mtu2: Add clk_prepare/unprepare support
clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails
ARM: at91: rm9200: switch back to clockevents_config_and_register
tick: Document tick_do_timer_cpu
timer: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...)
NOHZ: Check for nohz active instead of nohz enabled
Pull irq fixes from Thomas Gleixner:
- Correction of fuzzy and fragile IRQ_RETVAL macro
- IRQ related resume fix affecting only XEN
- ARM/GIC fix for chained GIC controllers
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Gic: fix boot for chained gics
irq: Enable all irqs unconditionally in irq_resume
genirq: Correct fuzzy and fragile IRQ_RETVAL() definition
Pull scheduler fixes from Ingo Molnar:
"Various smaller fixlets, all over the place"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/doc: Fix generation of device-drivers
sched: Expose preempt_schedule_irq()
sched: Fix a trivial typo in comments
sched: Remove unused variable in 'struct sched_domain'
sched: Avoid NULL dereference on sd_busy
sched: Check sched_domain before computing group power
MAINTAINERS: Update file patterns in the lockdep and scheduler entries
Pull perf fixes from Ingo Molnar:
"Misc kernel and tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools lib traceevent: Fix conversion of pointer to integer of different size
perf/trace: Properly use u64 to hold event_id
perf: Remove fragile swevent hlist optimization
ftrace, perf: Avoid infinite event generation loop
tools lib traceevent: Fix use of multiple options in processing field
perf header: Fix possible memory leaks in process_group_desc()
perf header: Fix bogus group name
perf tools: Tag thread comm as overriden
Pull workqueue fixes from Tejun Heo:
"This contains one important fix. The NUMA support added a while back
broke ordering guarantees on ordered workqueues. It was enforced by
having single frontend interface with @max_active == 1 but the NUMA
support puts multiple interfaces on unbound workqueues on NUMA
machines thus breaking the ordered guarantee. This is fixed by
disabling NUMA support on ordered workqueues.
The above and a couple other patches were sitting in for-3.12-fixes
but I forgot to push that out, so they ended up waiting a bit too
long. My aplogies.
Other fixes are minor"
* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix pool ID allocation leakage and remove BUILD_BUG_ON() in init_workqueues
workqueue: fix comment typo for __queue_work()
workqueue: fix ordered workqueues in NUMA setups
workqueue: swap set_cpus_allowed_ptr() and PF_NO_SETAFFINITY
Pull cgroup fixes from Tejun Heo:
"Fixes for three issues.
- cgroup destruction path could swamp system_wq possibly leading to
deadlock. This actually seems to happen in the wild with memcg
because memcg destruction path adds nested dependency on system_wq.
Resolved by isolating cgroup destruction work items on its
dedicated workqueue.
- Possible locking context deadlock through seqcount reported by
lockdep
- Memory leak under certain conditions"
* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix cgroup_subsys_state leak for seq_files
cpuset: Fix memory allocator deadlock
cgroup: use a dedicated workqueue for cgroup destruction
If CONFIG_NO_HZ=n tick_nohz_get_sleep_length() returns NSEC_PER_SEC/HZ.
If CONFIG_NO_HZ=y and the nohz functionality is disabled via the
command line option "nohz=off" or not enabled due to missing hardware
support, then tick_nohz_get_sleep_length() returns 0. That happens
because ts->sleep_length is never set in that case.
Set it to NSEC_PER_SEC/HZ when the NOHZ mode is inactive.
Reported-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The init_kernel_text() and core_kernel_text() functions should not
include the labels _einittext and _etext when checking if an address is
inside the .text or .init sections.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a cgroup file implements either read_map() or read_seq_string(),
such file is served using seq_file by overriding file->f_op to
cgroup_seqfile_operations, which also overrides the release method to
single_release() from cgroup_file_release().
Because cgroup_file_open() didn't use to acquire any resources, this
used to be fine, but since f7d58818ba ("cgroup: pin
cgroup_subsys_state when opening a cgroupfs file"), cgroup_file_open()
pins the css (cgroup_subsys_state) which is put by
cgroup_file_release(). The patch forgot to update the release path
for seq_files and each open/release cycle leaks a css reference.
Fix it by updating cgroup_file_release() to also handle seq_files and
using it for seq_file release path too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v3.12
Juri hit the below lockdep report:
[ 4.303391] ======================================================
[ 4.303392] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[ 4.303394] 3.12.0-dl-peterz+ #144 Not tainted
[ 4.303395] ------------------------------------------------------
[ 4.303397] kworker/u4:3/689 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 4.303399] (&p->mems_allowed_seq){+.+...}, at: [<ffffffff8114e63c>] new_slab+0x6c/0x290
[ 4.303417]
[ 4.303417] and this task is already holding:
[ 4.303418] (&(&q->__queue_lock)->rlock){..-...}, at: [<ffffffff812d2dfb>] blk_execute_rq_nowait+0x5b/0x100
[ 4.303431] which would create a new lock dependency:
[ 4.303432] (&(&q->__queue_lock)->rlock){..-...} -> (&p->mems_allowed_seq){+.+...}
[ 4.303436]
[ 4.303898] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock:
[ 4.303918] -> (&p->mems_allowed_seq){+.+...} ops: 2762 {
[ 4.303922] HARDIRQ-ON-W at:
[ 4.303923] [<ffffffff8108ab9a>] __lock_acquire+0x65a/0x1ff0
[ 4.303926] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[ 4.303929] [<ffffffff81063dd6>] kthreadd+0x86/0x180
[ 4.303931] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[ 4.303933] SOFTIRQ-ON-W at:
[ 4.303933] [<ffffffff8108abcc>] __lock_acquire+0x68c/0x1ff0
[ 4.303935] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[ 4.303940] [<ffffffff81063dd6>] kthreadd+0x86/0x180
[ 4.303955] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[ 4.303959] INITIAL USE at:
[ 4.303960] [<ffffffff8108a884>] __lock_acquire+0x344/0x1ff0
[ 4.303963] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[ 4.303966] [<ffffffff81063dd6>] kthreadd+0x86/0x180
[ 4.303969] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[ 4.303972] }
Which reports that we take mems_allowed_seq with interrupts enabled. A
little digging found that this can only be from
cpuset_change_task_nodemask().
This is an actual deadlock because an interrupt doing an allocation will
hit get_mems_allowed()->...->__read_seqcount_begin(), which will spin
forever waiting for the write side to complete.
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mel Gorman <mgorman@suse.de>
Reported-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Tony reported that aa0d532605 ("ia64: Use preempt_schedule_irq")
broke PREEMPT=n builds on ia64.
Ok, wrapped my brain around it. I tripped over the magic asm foo which
has a single need_resched check and schedule point for both sys call
return and interrupt return.
So you need the schedule_preempt_irq() for kernel preemption from
interrupt return while on a normal syscall preemption a schedule would
be sufficient. But using schedule_preempt_irq() is not harmful here in
any way. It just sets the preempt_active bit also in cases where it
would not be required.
Even on preempt=n kernels adding the preempt_active bit is completely
harmless. So instead of having an extra function, moving the existing
one out of the ifdef PREEMPT looks like the sanest thing to do.
It would also allow getting rid of various other sti/schedule/cli asm
magic in other archs.
Reported-and-Tested-by: Tony Luck <tony.luck@gmail.com>
Fixes: aa0d532605 ("ia64: Use preempt_schedule_irq")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[slightly edited Changelog]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311211230030.30673@ionos.tec.linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
1) is a bug fix that happens when root does the following:
echo function_graph > current_tracer
modprobe foo
echo nop > current_tracer
This causes the ftrace internal accounting to get screwed up and
crashes ftrace, preventing the user from using the function tracer
after that.
2) if a TRACE_EVENT has a string field, and NULL is given for it.
The internal trace event code does a strlen() and strcpy() on the
source of field. If it is NULL it causes the system to oops.
This bug has been there since 2.6.31, but no TRACE_EVENT ever passed
in a NULL to the string field, until now.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSlUw+AAoJEKQekfcNnQGugTYIAJQ7Zfhor2Jrw7XzkcBDpQv9
kqL/NvjLfyA49BLwba0VJCqJA56dEfW7kaSa7Wx0qAHdHKATLDA8G4c9FdHRAmZf
WJ4jDbrcJqc7DA2vEn4aUuczwvTMx0H1KJHPMAu9taEno3YocIzCMxkuNYelwAz2
XUkUGtR7olF85pyVccfZLKnKPtslSwxWoG6WgEqiAap6fIorPlcSXBVYFqLKVTRJ
P2e847eqxMF5ACLmv3dWiEvTPtWY91abN1zpeJYQNjBtQJmzVlvRcXYE6TwPUIFg
RtB9n3SrT+0lEWvcxDbQi+4hKHf+JQLkGaYwWCMJihbdF4sh36olzpUOimKVqsk=
=+9+v
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This includes two fixes.
1) is a bug fix that happens when root does the following:
echo function_graph > current_tracer
modprobe foo
echo nop > current_tracer
This causes the ftrace internal accounting to get screwed up and
crashes ftrace, preventing the user from using the function tracer
after that.
2) if a TRACE_EVENT has a string field, and NULL is given for it.
The internal trace event code does a strlen() and strcpy() on the
source of field. If it is NULL it causes the system to oops.
This bug has been there since 2.6.31, but no TRACE_EVENT ever passed
in a NULL to the string field, until now"
* tag 'trace-fixes-v3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix function graph with loading of modules
tracing: Allow events to have NULL strings
Commit 8c4f3c3fa9 "ftrace: Check module functions being traced on reload"
fixed module loading and unloading with respect to function tracing, but
it missed the function graph tracer. If you perform the following
# cd /sys/kernel/debug/tracing
# echo function_graph > current_tracer
# modprobe nfsd
# echo nop > current_tracer
You'll get the following oops message:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 2910 at /linux.git/kernel/trace/ftrace.c:1640 __ftrace_hash_rec_update.part.35+0x168/0x1b9()
Modules linked in: nfsd exportfs nfs_acl lockd ipt_MASQUERADE sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables uinput snd_hda_codec_idt
CPU: 2 PID: 2910 Comm: bash Not tainted 3.13.0-rc1-test #7
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
0000000000000668 ffff8800787efcf8 ffffffff814fe193 ffff88007d500000
0000000000000000 ffff8800787efd38 ffffffff8103b80a 0000000000000668
ffffffff810b2b9a ffffffff81a48370 0000000000000001 ffff880037aea000
Call Trace:
[<ffffffff814fe193>] dump_stack+0x4f/0x7c
[<ffffffff8103b80a>] warn_slowpath_common+0x81/0x9b
[<ffffffff810b2b9a>] ? __ftrace_hash_rec_update.part.35+0x168/0x1b9
[<ffffffff8103b83e>] warn_slowpath_null+0x1a/0x1c
[<ffffffff810b2b9a>] __ftrace_hash_rec_update.part.35+0x168/0x1b9
[<ffffffff81502f89>] ? __mutex_lock_slowpath+0x364/0x364
[<ffffffff810b2cc2>] ftrace_shutdown+0xd7/0x12b
[<ffffffff810b47f0>] unregister_ftrace_graph+0x49/0x78
[<ffffffff810c4b30>] graph_trace_reset+0xe/0x10
[<ffffffff810bf393>] tracing_set_tracer+0xa7/0x26a
[<ffffffff810bf5e1>] tracing_set_trace_write+0x8b/0xbd
[<ffffffff810c501c>] ? ftrace_return_to_handler+0xb2/0xde
[<ffffffff811240a8>] ? __sb_end_write+0x5e/0x5e
[<ffffffff81122aed>] vfs_write+0xab/0xf6
[<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85
[<ffffffff81122dbd>] SyS_write+0x59/0x82
[<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85
[<ffffffff8150a2d2>] system_call_fastpath+0x16/0x1b
---[ end trace 940358030751eafb ]---
The above mentioned commit didn't go far enough. Well, it covered the
function tracer by adding checks in __register_ftrace_function(). The
problem is that the function graph tracer circumvents that (for a slight
efficiency gain when function graph trace is running with a function
tracer. The gain was not worth this).
The problem came with ftrace_startup() which should always be called after
__register_ftrace_function(), if you want this bug to be completely fixed.
Anyway, this solution moves __register_ftrace_function() inside of
ftrace_startup() and removes the need to call them both.
Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Fixes: ed926f9b35 ("ftrace: Use counters to enable functions to trace")
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This reverts commit c2fda50966.
c2fda50966 removed lockdep annotation from work_on_cpu() to work around
the PCI path that calls work_on_cpu() from within a work_on_cpu() work item
(PF driver .probe() method -> pci_enable_sriov() -> add VFs -> VF driver
.probe method).
961da7fb6b22 ("PCI: Avoid unnecessary CPU switch when calling driver
.probe() method) avoids that recursive work_on_cpu() use in a different
way, so this revert restores the work_on_cpu() lockdep annotation.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
When the system enters suspend, it disables all interrupts in
suspend_device_irqs(), including the interrupts marked EARLY_RESUME.
On the resume side things are different. The EARLY_RESUME interrupts
are reenabled in sys_core_ops->resume and the non EARLY_RESUME
interrupts are reenabled in the normal system resume path.
When suspend_noirq() failed or suspend is aborted for any other
reason, we might omit the resume side call to sys_core_ops->resume()
and therefor the interrupts marked EARLY_RESUME are not reenabled and
stay disabled forever.
To solve this, enable all irqs unconditionally in irq_resume()
regardless whether interrupts marked EARLY_RESUMEhave been already
enabled or not.
This might try to reenable already enabled interrupts in the non
failure case, but the only affected platform is XEN and it has been
confirmed that it does not cause any side effects.
[ tglx: Massaged changelog. ]
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Cc: <ian.campbell@citrix.com>
Cc: <rjw@rjwysocki.net>
Cc: <len.brown@intel.com>
Cc: <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1385388587-16442-1-git-send-email-ldewangan@nvidia.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull crypto update from Herbert Xu:
- Made x86 ablk_helper generic for ARM
- Phase out chainiv in favour of eseqiv (affects IPsec)
- Fixed aes-cbc IV corruption on s390
- Added constant-time crypto_memneq which replaces memcmp
- Fixed aes-ctr in omap-aes
- Added OMAP3 ROM RNG support
- Add PRNG support for MSM SoC's
- Add and use Job Ring API in caam
- Misc fixes
[ NOTE! This pull request was sent within the merge window, but Herbert
has some questionable email sending setup that makes him public enemy
#1 as far as gmail is concerned. So most of his emails seem to be
trapped by gmail as spam, resulting in me not seeing them. - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (49 commits)
crypto: s390 - Fix aes-cbc IV corruption
crypto: omap-aes - Fix CTR mode counter length
crypto: omap-sham - Add missing modalias
padata: make the sequence counter an atomic_t
crypto: caam - Modify the interface layers to use JR API's
crypto: caam - Add API's to allocate/free Job Rings
crypto: caam - Add Platform driver for Job Ring
hwrng: msm - Add PRNG support for MSM SoC's
ARM: DT: msm: Add Qualcomm's PRNG driver binding document
crypto: skcipher - Use eseqiv even on UP machines
crypto: talitos - Simplify key parsing
crypto: picoxcell - Simplify and harden key parsing
crypto: ixp4xx - Simplify and harden key parsing
crypto: authencesn - Simplify key parsing
crypto: authenc - Export key parsing helper function
crypto: mv_cesa: remove deprecated IRQF_DISABLED
hwrng: OMAP3 ROM Random Number Generator support
crypto: sha256_ssse3 - also test for BMI2
crypto: mv_cesa - Remove redundant of_match_ptr
crypto: sahara - Remove redundant of_match_ptr
...
When one work starts execution, the high bits of work's data contain
pool ID. It can represent a maximum of WORK_OFFQ_POOL_NONE. Pool ID
is assigned WORK_OFFQ_POOL_NONE when the work being initialized
indicating that no pool is associated and get_work_pool() uses it to
check the associated pool. So if worker_pool_assign_id() assigns a
ID greater than or equal WORK_OFFQ_POOL_NONE to a pool, it triggers
leakage, and it may break the non-reentrance guarantee.
This patch fix this issue by modifying the worker_pool_assign_id()
function calling idr_alloc() by setting @end param WORK_OFFQ_POOL_NONE.
Furthermore, in the current implementation, the BUILD_BUG_ON() in
init_workqueues makes no sense. The number of worker pools needed
cannot be determined at compile time, because the number of backing
pools for UNBOUND workqueues is dynamic based on the assigned custom
attributes. So remove it.
tj: Minor comment and indentation updates.
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
An ordered workqueue implements execution ordering by using single
pool_workqueue with max_active == 1. On a given pool_workqueue, work
items are processed in FIFO order and limiting max_active to 1
enforces the queued work items to be processed one by one.
Unfortunately, 4c16bd327c ("workqueue: implement NUMA affinity for
unbound workqueues") accidentally broke this guarantee by applying
NUMA affinity to ordered workqueues too. On NUMA setups, an ordered
workqueue would end up with separate pool_workqueues for different
nodes. Each pool_workqueue still limits max_active to 1 but multiple
work items may be executed concurrently and out of order depending on
which node they are queued to.
Fix it by using dedicated ordered_wq_attrs[] when creating ordered
workqueues. The new attrs match the unbound ones except that no_numa
is always set thus forcing all NUMA nodes to share the default
pool_workqueue.
While at it, add sanity check in workqueue creation path which
verifies that an ordered workqueues has only the default
pool_workqueue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Libin <huawei.libin@huawei.com>
Cc: stable@vger.kernel.org
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Move the setting of PF_NO_SETAFFINITY up before set_cpus_allowed()
in create_worker(). Otherwise userland can change ->cpus_allowed
in between.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since be44562613 ("cgroup: remove synchronize_rcu() from
cgroup_diput()"), cgroup destruction path makes use of workqueue. css
freeing is performed from a work item from that point on and a later
commit, ea15f8ccdb ("cgroup: split cgroup destruction into two
steps"), moves css offlining to workqueue too.
As cgroup destruction isn't depended upon for memory reclaim, the
destruction work items were put on the system_wq; unfortunately, some
controller may block in the destruction path for considerable duration
while holding cgroup_mutex. As large part of destruction path is
synchronized through cgroup_mutex, when combined with high rate of
cgroup removals, this has potential to fill up system_wq's max_active
of 256.
Also, it turns out that memcg's css destruction path ends up queueing
and waiting for work items on system_wq through work_on_cpu(). If
such operation happens while system_wq is fully occupied by cgroup
destruction work items, work_on_cpu() can't make forward progress
because system_wq is full and other destruction work items on
system_wq can't make forward progress because the work item waiting
for work_on_cpu() is holding cgroup_mutex, leading to deadlock.
This can be fixed by queueing destruction work items on a separate
workqueue. This patch creates a dedicated workqueue -
cgroup_destroy_wq - for this purpose. As these work items shouldn't
have inter-dependencies and mostly serialized by cgroup_mutex anyway,
giving high concurrency level doesn't buy anything and the workqueue's
@max_active is set to 1 so that destruction work items are executed
one by one on each CPU.
Hugh Dickins: Because cgroup_init() is run before init_workqueues(),
cgroup_destroy_wq can't be allocated from cgroup_init(). Do it from a
separate core_initcall(). In the future, we probably want to reorder
so that workqueue init happens before cgroup_init().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Link: http://lkml.kernel.org/r/20131111220626.GA7509@sbohrermbp13-local.rgmadvisors.com
Link: http://lkml.kernel.org/g/alpine.LNX.2.00.1310301606080.2333@eggly.anvils
Cc: stable@vger.kernel.org # v3.9+
Since commit 1e75fa8be9 (time: Condense timekeeper.xtime
into xtime_sec - merged in v3.6), there has been an problem
with the error accounting in the timekeeping code, such that
when truncating to nanoseconds, we round up to the next nsec,
but the balancing adjustment to the ntp_error value was dropped.
This causes 1ns per tick drift forward of the clock.
In 3.7, this logic was isolated to only GENERIC_TIME_VSYSCALL_OLD
architectures (s390, ia64, powerpc).
The fix is simply to balance the accounting and to subtract the
added nanosecond from ntp_error. This allows the internal long-term
clock steering to keep the clock accurate.
While this fix removes the regression added in 1e75fa8be9, the
ideal solution is to move away from GENERIC_TIME_VSYSCALL_OLD
and use the new VSYSCALL method, which avoids entirely the
nanosecond granular rounding, and the resulting short-term clock
adjustment oscillation needed to keep long term accurate time.
[ jstultz: Many thanks to Martin for his efforts identifying this
subtle bug, and providing the fix. ]
Originally-from: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Paul Turner <pjt@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable <stable@vger.kernel.org> #v3.6+
Link: http://lkml.kernel.org/r/1385149491-20307-1-git-send-email-john.stultz@linaro.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
