Commit Graph

1014 Commits

Author SHA1 Message Date
Linas Vepstas
94688cf245 PCI: export pci_restore_msi_state()
PCI error recovery usually involves the PCI adapter being reset.
If the device is using MSI, the reset will cause the MSI state
to be lost; the device driver needs to restore the MSI state.

The pci_restore_msi_state() routine is currently protected
by CONFIG_PM; remove this, and also export the symbol, so
that it can be used in a modle.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:22 -08:00
Linas Vepstas
1b7c9fcaa1 pci hotplug: fix rpaphp directory naming
Fix presentation of the slot number in the /sys/bus/pci/slots
directory to match that used in the majority of other drivers.

> Greg said:
> How is anyone supposed to write sane managability tools in the
> presence
> of such anarchy?
>
> > ~ # cat /sys/bus/pci/slots/0000:00:02.2/phy_location
> > U787A.001.DNZ00Z5-P1-C2
>
> Right.  This should look like:
>
> # cat /sys/bus/pci/slots/U787A.001.DNZ00Z5-P1-C2/address
> 0000:00:02

This patch implements exactly what you describe. Boot tested.
I assume you really mean it -- if so, then please review and
ack the patch !?

I have absolutely no clue if this breaks any existing IBM tools.
I'm pretty sure it doesn't ... but attention Mike Strosaker! does it?

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: <strosake@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:22 -08:00
Jean Delvare
677cc6443b PCI: Unhide the SMBus on the HP xw4100
Unhide the SMBus on the HP xw4100. This gives access to a hardware
monitoring chip (ADT7463) and to the memory module SPD EEPROMs. I
checked that ACPI wasn't accessing the SMBus, so it should be safe.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:22 -08:00
Fenghua Yu
093f87d279 PCI: More Sanity checks for DMAR
Add and changes a few sanity checks in dmar.c.

1.  The haw field in ACPI DMAR table in VT-d spec doesn't describe the
   range of haw.  But since DMA page size is 4KB in DMA remapping, haw
   should be at least 4KB.  The current VT-d code in dmar.c returns failure
   when haw==0.  This sanity check is not accurate and execution can pass
   when haw is less than one page size 4KB.  This patch changes the haw
   sanity check to validate if haw is less than 4KB.

2. Add dmar_rmrr_units verification.

3. Add parse_dmar_table() verification.

[akpm@linux-foundation.org: coding-style fixes]

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: mark gross <mgross@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:21 -08:00
Andrew Morton
652c538eb5 PCI: drivers/pci/quirks.c: coding-style cleanup
Remove lots of space-before-) instances.  Perhaps these were a workaround for
problems in some long-dead cpp version.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:21 -08:00
Adrian Bunk
943e6c0d5c PCI: remove additional pci_scan_child_bus() prototype
There's already a prototype for pci_scan_child_bus() at the correct place in
pci.h, so there's no reason for an additional one.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:21 -08:00
Adrian Bunk
b73e96878d PCI: always export pci_scan_single_device
This patch fixes the following build error with CONFIG_HOTPLUG=n:

  MODPOST 2137 modules
ERROR: "pci_scan_single_device" [drivers/edac/i82875p_edac.ko] undefined!

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:21 -08:00
Diego Woitasen
0741a951e8 PCI: remove unneeded lock_kernel() in drivers/pci/syscall.c.
sys_pciconfig_{read,write}() are protected against PCI removal with the
reference count in struct pci_dev.  The concurrency of
pci_user_{read,write}_config_* functions are already protected by pci_lock
in drivers/pci/access.c.

Signed-off-by: Diego Woitasen <diego@woitasen.com.ar>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:21 -08:00
Lee Schermerhorn
74e27e44b0 PCI: Mem Policy: fix mempolicy usage in pci driver
In an attempt to ensure memory allocation from the local node, the pci
driver temporarily replaces the current task's memory policy with the
system default policy.  Trying to be a good citizen, the driver then call's
mpol_get() on the new policy.  When it's finished probing, it undoes the
'_get by calling mpol_free() [on the system default policy] and then
restores the current task's saved mempolicy.

A couple of issues here:

1) it's never necessary to set a task's mempolicy to the
   system default policy in order to get system default
   allocation behavior.  Simply set the current task's
   mempolicy to NULL and allocations will fall back to
   system default policy.

2) we should never [need to] call mpol_free() on the system
   default policy.  [I plan on trapping this with a VM_BUG_ON()
   in a subsequent patch.]

This patch removes the calls to mpol_get() and mpol_free()
and uses NULL for the temporary task mempolicy to effect
default allocation behavior.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:20 -08:00
Tim Yamin
53a9bf4267 PCI: VIA CX700 quirk to disable PCI Bus Parking
PCI Bus Parking and PCI Master read caching on the VIA CX700 is buggy and
can lead to problems such as USB2.0 packet loss if a VT6212L controller
is on the PCI bus. It's disabled by default, but some BIOSes turn these
features on and this patch reverts the configuration to the safe defaults.

Signed-off-by: Tim Yamin <tim.yamin@zonbu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:20 -08:00
Auke Kok
2b1afa87e1 PCI: quirk_vialatency: Omit reading pci revision ID
Don't read the revision ID unnecessary since the PCI subsystem
fills this field in already.

Updated to fix a thinko bug in a previously sent patch.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:20 -08:00
Alex Chiang
561e55e8e3 PCI: hotplug: Link fakephp last
Currently, fakephp will claim all devices; we really only want it
to claim those not in slots.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:20 -08:00
Alex Chiang
41ece3829f PCI: hotplug: pci_hotplug_core whitespace fix
Remove superfluous space.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:20 -08:00
Alex Chiang
1d5b95ab8e PCI: hotplug: acpiphp: Remove unused variable from acpiphp
Remove unused variable from acpiphp.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:20 -08:00
Kristen Carlson Accardi
1ec87280eb PCI: hotplug: remove Experimental
Remove EXPERIMENTAL from PCI Hot Plug.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:19 -08:00
Joonwoo Park
f362b8bffe PCI: hotplug: Switch to pci_get_bus_and_slot
Thank you so much for your check & advise.
This time, I've tried on ibmphp_core.c, is it OK?

Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:19 -08:00
Shaohua Li
4348a2dc49 pcie: utilize pcie transaction pending bit
PCIE has a mechanism to wait for Non-Posted request to complete. I think
pci_disable_device is a good place to do this.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:19 -08:00
Shaohua Li
39ec4561b3 pcie port driver: correctly detect native PME feature
Native PME is capability of root port or root complex event collector.
It's not determined by PCI PME capability.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:18 -08:00
Adrian Bunk
eb003ec265 PCI: drivers/pci/: remove unused exports
This patch removes the following unused exports:
- remove the following unused EXPORT_SYMBOL's:
 - pci-acpi.c: pci_osc_support_set
 - proc.c: pci_proc_detach_bus
- remove the following unused EXPORT_SYMBOL_GPL's:
  - bus.c: pci_walk_bus
  - probe.c: pci_create_bus
  - setup-res.c: pci_claim_resource

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:18 -08:00
Adrian Bunk
b09549ef9b PCI: drivers/pci/rom.c: #if 0 two functions
This patch #if 0's the following unused global functions:
- rom.c: pci_map_rom_copy()
- rom.c: pci_remove_rom()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:18 -08:00
Adrian Bunk
ad668599f2 PCI: make pci_restore_bars() static
This patch makes the needlessly global pci_restore_bars() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:18 -08:00
Tejun Heo
b95d58eaf2 pci: allow multiple calls to pcim_enable_device()
There's no reason not to allow multiple calls to pcim_enable_device().
Calls after the first one can simply be noop.  All PCI resources will
be released when the initial pcim_enable_device() resource is
released.

This allows more flexibility to managed PCI users.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-01 12:26:44 -05:00
Paul Mackerras
bd45ac0c5d Merge branch 'linux-2.6' 2008-01-31 11:25:51 +11:00
Kumar Gala
03a16b27bd [POWERPC] Always build setup-bus.c on powerpc
The common arch/powerpc code calls in to functions in setup-bus.c
so some builds of ppc32 would fail.

Note, ppc32 usage of setup-irq.c is limited to arch/ppc and should be
removed when arch/ppc goes away.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-27 14:07:37 -06:00
Greg Kroah-Hartman
c10997f657 Kobject: convert drivers/* from kobject_unregister() to kobject_put()
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Greg Kroah-Hartman
2b93730318 PCI: remove foolish code from pci-driver.c
The PCI bus should not be trying to declare its own attribute type.
Especially as this code could never ever be called because the driver
core overwrites the driver kobject type to be its own internal type.
Delete all of this code as it was never being used and is not correct.

Also update my copyright on the file while I'm touching things there.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:34 -08:00
Greg Kroah-Hartman
03d43b19b9 PCI: use proper call to driver_create_file
Don't try to call the "raw" sysfs_create_file when we already have a
helper function to do this kind of work for us.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:33 -08:00
Greg Kroah-Hartman
b249072ee6 driver core: add way to get to bus device klist
This allows an easier way to get to the device klist associated with a
struct bus_type (you have three to choose from...)  This will make it
easier to move these fields to be dynamic in a future patch.

The only user of this is the PCI core which horribly abuses this
interface to rearrange the order of the pci devices.  This should be
done using the existing bus device walking functions, but that's left
for future patches.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:33 -08:00
Greg Kroah-Hartman
0fed80f7a6 driver core: add way to get to bus kset
This allows an easier way to get to the kset associated with a struct
bus_type (you have three to choose from...)  This will make it easier to
move these fields to be dynamic in a future patch.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:33 -08:00
Greg Kroah-Hartman
64dbcac3a1 Kobject: change drivers/pci/hotplug/pci_hotplug_core.c to use kobject_init_and_add
Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:28 -08:00
Greg Kroah-Hartman
f55842f232 kobject: clean up rpadlpar horrid sysfs abuse
rpadlpar pci hotplug driver was doing some pretty bad stuff with the
sysfs files.  This cleans up the logic to be sane and gets rid of the
gratuitous kset that is not needed for a simple directory like this.

Note, this patch is not even build tested, let alone run-time tested.
Someone with access to this hardware and can test would be greatly
appreciated.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: John Rose <johnrose@austin.ibm.com>
Cc: Badari Pulavarty <pbadari@gmail.com>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:24 -08:00
Greg Kroah-Hartman
81ace5cd8f kset: convert pci hotplug to use kset_create_and_add
This also renames pci_hotplug_slots_subsys to pcis_hotplug_slots_kset
catch all current users with a build error instead of a build warning
which can easily be missed.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:14 -08:00
Greg Kroah-Hartman
3514faca19 kobject: remove struct kobj_type from struct kset
We don't need a "default" ktype for a kset.  We should set this
explicitly every time for each kset.  This change is needed so that we
can make ksets dynamic, and cleans up one of the odd, undocumented
assumption that the kset/kobject/ktype model has.

This patch is based on a lot of help from Kay Sievers.

Nasty bug in the block code was found by Dave Young
<hidave.darkstar@gmail.com>

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:10 -08:00
Paul Mackerras
9156ad4833 Merge branch 'linux-2.6' 2008-01-24 10:07:21 +11:00
Zhao Yakui
d1ec7298fc ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9
It is important that these resources be reserved
to avoid conflicts with well known ACPI registers.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-11 00:24:55 -05:00
Linus Torvalds
ad7edfe049 [PCI] Do not enable CRS Software Visibility by default
It appears that some PCI-E bridges do the wrong thing in the presense of
CRS Software Visibility and MMCONFIG.  In particular, it looks like an
ATI bridge (device ID 7936) will return 0001 in the vendor ID field of
any bridged devices indefinitely.

Not enabling CRS SV avoids the problem, and as we currently do not
really make good use of the feature anyway (we just time out rather than
do any threaded discovery as suggested by the CRS specs), we're better
off just not enabling it.

This should fix a slew of problem reports with random devices (generally
graphics adapters or fairly high-performance networking cards, since it
only affected PCI-E) not getting properly recognized on these AMD systems.

If we really want to use CRS-SV, we may end up eventually needing a
whitelist of systems where this should be enabled, along with some kind
of "pcibios_enable_crs()" query to call the system-specific code.

Suggested-by: Loic Prylli <loic@myri.com>
Tested-by: Kai Ruhnau <kai@tragetaschen.dyndns.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-27 21:21:36 -08:00
Paul Mackerras
c2a7dcad9f Merge branch 'linux-2.6' 2007-12-21 22:21:08 +11:00
Benjamin Herrenschmidt
bf5e2ba28f [POWERPC] Merge PCI resource fixups
The PCI code in 32 and 64 bits fixes up resources differently.

32 bits uses a header quirk plus handles bridges in pcibios_fixup_bus()
while 64 bits does things in various places depending on whether you
are using OF probing, using PCI hotplug, etc...

This merges those by basically using the 32 bits approach for both,
with various tweaks to make 64 bits work with the new approach.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:09 +11:00
Gary Hade
bb44609361 PCI: Restore PCI expansion ROM P2P prefetch window creation
Restore PCI expansion ROM P2P prefetch window creation.

This patch reverts previous "Avoid creating P2P prefetch
window for expansion ROMs" change due to regressions that
were spotted on some systems.

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-17 10:41:19 -08:00
Linus Torvalds
af1bff4f1d Revert "PCI: fix IDE legacy mode resources"
This reverts commit fd6e732186, which
helped up things on MIPS, but was wrong for everything else.  As Ralf
Baechle puts it:

  "It seems the whole MIPS resource managment is complicated enough (out
   of necessity) that only a few people actually grok it.  Ioports being
   actually memory mapped on MIPS only makes the confusion worse, sigh."

Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Alan Cox <alan@redhat.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-10 07:40:54 -08:00
Randy Dunlap
26e6c66e47 pci hotplug: kernel-doc fixes
acpiphp.h: not using kernel-doc, so change /** to /*
acpiphp_core.c: lots of kernel-doc cleanups
acpiphp_glue.c: lots of kernel-doc cleanups
acpiphp_ibm.c: lots of kernel-doc cleanups
cpqphp_core.c: lots of kernel-doc cleanups
cpqphp_ctrl.c: lots of kernel-doc cleanups
fakephp.c:  correct kernel-doc notation
pciehp_ctrl.c: correct kernel-doc notation
rpadlpar_core.c: correct function names & kernel-doc notation
rpaphp_core.c: correct kernel-doc notation
shpchp_ctrl.c: correct kernel-doc notation

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kristen Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28 14:35:26 -08:00
Randy Dunlap
d885c6b75b pci-aer: fix kernel-doc mistakes
Fix kernel-doc parameter names and ending block comments (change **/
to */).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28 14:35:26 -08:00
Julia Lawall
151fc5dfc8 PCI: drivers/pci/pci-sysfs.c: Add missing pci_dev_put
There should be a pci_dev_put when breaking out of a loop that iterates
over calls to pci_get_device and similar functions.

This was fixed using the following semantic patch.

// <smpl>
@@
identifier d;
type T;
expression e;
iterator for_each_pci_dev;
@@

T *d;
...
for_each_pci_dev(d)
  {... when != pci_dev_put(d)
       when != e = d
(
   return d;
|
+  pci_dev_put(d);
?  return ...;
)
...}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28 14:35:26 -08:00
Linas Vepstas
bf164410d0 PCI: pcie portdriver: initialize returned value
The pcie protdrv status can be returned uninitialized,
if there are no children under a device. This leads to
bad responses downstream. Fix this.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28 14:35:25 -08:00
Jeff Garzik
bd3989e006 PCI: Add Kconfig option to disable deprecated pci_find_* API
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05 13:35:17 -08:00
Adrian Bunk
0039541088 PCI Hotplug: cpqhp_pushbutton_thread(): remove a pointless if() check
The Coverity checker spotted that we'd have already oops'ed if "ctrl"
was NULL.

Additionally, "func" had just been checked for not being NULL.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05 13:35:17 -08:00
Adrian Bunk
d73460d79b PCI: make pci_match_device() static
pci_match_device() no longer has any other users.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05 13:35:17 -08:00
David Miller
5257dca0bd PCI: Remove 3 incorrect MSI quirks.
Now that we have dealt with the real issue, in that some ATI SATA and
USB controllers needed the INTX_DISABLE quirk, we can remove these AMD
chipset global MSI disabling quirks.

This reverts three changesets:

4be8f90643 (PCI: disable MSI on RS690)
aea6a433f5 (PCI: disable MSI on RD580)
f122392f67 (PCI: disable MSI on RX790)

This is based upon testing and feedback from
Shane Huang <Shane.Huang@amd.com>.

Cc: Shane Huang <Shane.Huang@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05 13:35:17 -08:00
David Miller
bc38b411fe PCI: Add MSI INTX_DISABLE quirks for ATI SB700/800 SATA and IXP SB400 USB
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05 13:35:16 -08:00
David Miller
ba698ad4b7 PCI: Add quirk for devices which disable MSI when INTX_DISABLE is set.
A reasonably common problem with some devices is that they will
disable MSI generation when the INTX_DISABLE bit is set in the
PCI_COMMAND register.

Quirk this explicitly, guarding the pci_intx() calls in msi.c with
this quirk indication.

The first entries for this quirk are for 5714 and 5780 Tigon3 chips,
and thus we can remove the workaround code from the tg3.c driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05 13:35:16 -08:00
David Miller
1d84b5424e PCI: Add MSI quirk for ServerWorks HT1000 PCIX bridge.
This is the fix for the following problem:

https://bugzilla.redhat.com/show_bug.cgi?id=227657

The bnx2 device 5706 complains about MSI not working behind a
ServerWorks HT1000 PCIX bridge. An earlier commit to fix the problem:

e3008dedff:

"PCI: disable MSI by default on systems with Serverworks HT1000 chips"

was not entirely correct, and has been reverted.

MSI does not work on the PCIX bus because the BIOS did not set the
HT_MSI_FLAGS_ENABLE bit in the HyperTransport MSI capability on the
bridge.  We use the existing quirk_msi_ht_cap() to detect the problem
and disable MSI in all buses behind it.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Cc: Anantha Subramanyam <ananth@broadcom.com>
Cc: Naren Sankar <nsankar@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05 13:35:16 -08:00
David Miller
2cc31879f8 PCI: Revert "PCI: disable MSI by default on systems with Serverworks HT1000 chips"
This reverts commit e3008dedff.

The real bug was an INTX issue in the tg3 ethernet chip, and
cured by commit c129d962a66c76964954a98b38586ada82cf9381

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05 13:35:16 -08:00
Takashi Iwai
10e27ed4ba intel-iommu: Fix array overflow
Fix possible array overflow:

drivers/pci/intel-iommu.c: In function ¡dmar_get_fault_reason¢:
drivers/pci/intel-iommu.c:753: warning: array subscript is above array bounds
drivers/pci/intel-iommu.c: In function ¡iommu_page_fault¢:
drivers/pci/intel-iommu.c:753: warning: array subscript is above array bounds

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Mark Gross <mgross@linux.intel.com>
Acked-by: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-30 08:06:55 -07:00
Joerg Roedel
395624fcdd x86 gart: rename iommu.h to gart.h
This patch renames the include file asm-x86/iommu.h to asm-x86/gart.h to make
clear to which IOMMU implementation it belongs. The patch also adds "GART" to
the Kconfig line.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-30 00:22:22 +01:00
Al Viro
4fe05bbcd5 intel-iommu fixes
- off by one in dmar_get_fault_reason() (maximal index in array is
   ARRAY_SIZE()-1, not ARRAY_SIZE())
 - NULL noise removal
 - __iomem annotation fix

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-29 07:41:32 -07:00
Tejun Heo
3a9e3a51dd jmicron: update quirk for JMB361/3/5/6
Set bits 0, 4, 5 and 7 of PCI configuration register 0x40 in the
quirk.  This has the following effects and is recommended by the
vendor.

* Force enable of IDE channels (used to be left alone as BIOS
  configured)

* Change initial phase behavior of PIO cycle such that the host pulls
  down the bus instead of tristating it.  Vendor recommends this
  setting.

The above settings are better for the current generation of
controllers and needed for the upcoming next generation.

Tested on JMB363.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Ethan Hsiao <ethanhsiao@jmicron.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-23 21:20:02 -04:00
FUJITA Tomonori
12d4d40e6f intel-iommu: fix sg_page()
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23 09:49:33 +02:00
FUJITA Tomonori
c03ab37cbe intel-iommu sg chaining support
x86_64 defines ARCH_HAS_SG_CHAIN. So if IOMMU implementations don't
support sg chaining, we will get data corruption.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:19 -07:00
Keshavamurthy, Anil S
358dd8ac53 intel-iommu: fix for IOMMU early crash
pci_dev's->sysdata is highly overloaded and currently IOMMU is broken due
to IOMMU code depending on this field.

This patch introduces new field in pci_dev's dev.archdata struct to hold
IOMMU specific per device IOMMU private data.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:19 -07:00
Keshavamurthy, Anil S
f76aec76ec intel-iommu: optimize sg map/unmap calls
This patch adds PageSelectiveInvalidation support replacing existing
DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also
enables to mapping one big contiguous DMA virtual address which is mapped
to discontiguous physical address for SG map/unmap calls.

"Doamin selective invalidations" wipes out the IOMMU address translation
cache based on domain ID where as "Page selective invalidations" wipes out
the IOMMU address translation cache for that address mask range which is
more cache friendly when compared to Domain selective invalidations.

Here is how it is done.
1) changes to iova.c
alloc_iova() now takes a bool size_aligned argument, which
when when set, returns the io virtual address that is
naturally aligned to 2 ^ x, where x is the order
of the size requested.

Returning this io vitual address which is naturally
aligned helps iommu to do the "page selective
invalidations" which is IOMMU cache friendly
over "domain selective invalidations".

2) Changes to driver/pci/intel-iommu.c
Clean up intel_{map/unmap}_{single/sg} () calls so that
s/g map/unamp calls is no more dependent on
intel_{map/unmap}_single()

intel_map_sg() now computes the total DMA virtual address
required and allocates the size aligned total DMA virtual address
and maps the discontiguous physical address to the allocated
contiguous DMA virtual address.

In the intel_unmap_sg() case since the DMA virtual address
is contiguous and size_aligned, PageSelectiveInvalidation
is used replacing earlier DomainSelectiveInvalidations.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Suresh B <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:19 -07:00
Keshavamurthy, Anil S
49a0429e53 Intel IOMMU: Iommu floppy workaround
This config option (DMAR_FLPY_WA) sets up 1:1 mapping for the floppy device so
that the floppy device which does not use DMA api's will continue to work.

Once the floppy driver starts using DMA api's this config option can be turn
off or this patch can be yanked out of kernel at that time.

[akpm@linux-foundation.org: cleanups, rename things, build fix]
[jengelh@computergmbh.de: Kconfig fixes]
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:19 -07:00
Keshavamurthy, Anil S
e820482cd2 Intel IOMMU: Iommu Gfx workaround
When we fix all the opensource gfx drivers to use the DMA api's, at that time
we can yank this config options out.

[jengelh@computergmbh.de: Kconfig fixes]
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:19 -07:00
Keshavamurthy, Anil S
3460a6d9ce Intel IOMMU: DMAR fault handling support
MSI interrupt handler registrations and fault handling support for Intel-IOMMU
hadrware.

This patch enables the MSI interrupts for the DMA remapping units and in the
interrupt handler read the fault cause and outputs the same on to the console.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:19 -07:00
Keshavamurthy, Anil S
7d3b03ce7b Intel IOMMU: Intel iommu cmdline option - forcedac
Introduce intel_iommu=forcedac commandline option.  This option is helpful to
verify the pci device capability of handling physical dma'able address greater
than 4G.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:18 -07:00
Keshavamurthy, Anil S
eb3fa7cb51 Intel IOMMU: Avoid memory allocation failures in dma map api calls
Intel IOMMU driver needs memory during DMA map calls to setup its internal
page tables and for other data structures.  As we all know that these DMA map
calls are mostly called in the interrupt context or with the spinlock held by
the upper level drivers(network/storage drivers), so in order to avoid any
memory allocation failure due to low memory issues, this patch makes memory
allocation by temporarily setting PF_MEMALLOC flags for the current task
before making memory allocation calls.

We evaluated mempools as a backup when kmem_cache_alloc() fails
and found that mempools are really not useful here because
 1) We don't know for sure how much to reserve in advance
 2) And mempools are not useful for GFP_ATOMIC case (as we call
    memory alloc functions with GFP_ATOMIC)

(akpm: point 2 is wrong...)

With PF_MEMALLOC flag set in the current->flags, the VM subsystem avoids any
watermark checks before allocating memory thus guarantee'ing the memory till
the last free page.  Further, looking at the code in mm/page_alloc.c in
__alloc_pages() function, looks like this flag is useful only in the
non-interrupt context.

If we are in the interrupt context and memory allocation in IOMMU driver fails
for some reason, then the DMA map api's will return failure and it is up to
the higher level drivers to retry.  Suppose, if upper level driver programs
the controller with the buggy DMA virtual address, the IOMMU will block that
DMA transaction when that happens thus preventing any corruption to main
memory.

So far in our test scenario, we were unable to create any memory allocation
failure inside dma map api calls.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:18 -07:00
Keshavamurthy, Anil S
ba39592764 Intel IOMMU: Intel IOMMU driver
Actual intel IOMMU driver.  Hardware spec can be found at:
http://www.intel.com/technology/virtualization

This driver sets X86_64 'dma_ops', so hook into standard DMA APIs.  In this
way, PCI driver will get virtual DMA address.  This change is transparent to
PCI drivers.

[akpm@linux-foundation.org: remove unneeded cast]
[akpm@linux-foundation.org: build fix]
[bunk@stusta.de: fix duplicate CONFIG_DMAR Makefile line]
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:18 -07:00
Keshavamurthy, Anil S
f8de50eb6b Intel IOMMU: IOVA allocation and management routines
This code implements a generic IOVA allocation and management.  As per Dave's
suggestion we are now allocating IO virtual address from Higher DMA limit
address rather than lower end address and this eliminated the need to preserve
the IO virtual address for multiple devices sharing the same domain virtual
address.

Also this code uses red black trees to store the allocated and reserved iova
nodes.  This showed a good performance improvements over previous linear
linked list.

[akpm@linux-foundation.org: remove inlines]
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:18 -07:00
Keshavamurthy, Anil S
994a65e25d Intel IOMMU: PCI generic helper function
When devices are under a p2p bridge, upstream transactions get replaced by the
device id of the bridge as it owns the PCIE transaction.  Hence its necessary
to setup translations on behalf of the bridge as well.  Due to this limitation
all devices under a p2p share the same domain in a DMAR.

We just cache the type of device, if its a native PCIe device
or not for later use.

[akpm@linux-foundation.org: BUG_ON -> WARN_ON+recover]
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:18 -07:00
Keshavamurthy, Anil S
10e5247f40 Intel IOMMU: DMAR detection and parsing logic
This patch supports the upcomming Intel IOMMU hardware a.k.a.  Intel(R)
Virtualization Technology for Directed I/O Architecture and the hardware spec
for the same can be found here
http://www.intel.com/technology/virtualization/index.htm

FAQ! (questions from akpm, answers from ak)

> So...  what's all this code for?
>
> I assume that the intent here is to speed things up under Xen, etc?

Yes in some cases, but not this code.  That would be the Xen version of this
code that could potentially assign whole devices to guests.  I expect this to
be only useful in some special cases though because most hardware is not
virtualizable and you typically want an own instance for each guest.

Ok at some point KVM might implement this too; i likely would use this code
for this.

> Do we
> have any benchmark results to help us to decide whether a merge would be
> justified?

The main advantage for doing it in the normal kernel is not performance, but
more safety.  Broken devices won't be able to corrupt memory by doing random
DMA.

Unfortunately that doesn't work for graphics yet, for that need user space
interfaces for the X server are needed.

There are some potential performance benefits too:

- When you have a device that cannot address the complete address range an
  IOMMU can remap its memory instead of bounce buffering.  Remapping is likely
  cheaper than copying.

- The IOMMU can merge sg lists into a single virtual block.  This could
  potentially speed up SG IO when the device is slow walking SG lists.  [I
  long ago benchmarked 5% on some block benchmark with an old MPT Fusion; but
  it probably depends a lot on the HBA]

And you get better driver debugging because unexpected memory accesses from
the devices will cause a trappable event.

>
> Does it slow anything down?

It adds more overhead to each IO so yes.

This patch:

Add support for early detection and parsing of DMAR's (DMA Remapping) reported
to OS via ACPI tables.

DMA remapping(DMAR) devices support enables independent address translations
for Direct Memory Access(DMA) from Devices.  These DMA remapping devices are
reported via ACPI tables and includes pci device scope covered by these DMA
remapping device.

For detailed info on the specification of "Intel(R) Virtualization Technology
for Directed I/O Architecture" please see
http://www.intel.com/technology/virtualization/index.htm

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Greg KH <greg@kroah.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:18 -07:00
Linus Torvalds
4271e0f7e1 Get rid of unused variable warning in drivers/pci/hotplug/pci_hotplug_core.c
Commit 5a7ad7f044 removed all uses of
'retval', but didn't remove the variable itself.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15 09:07:58 -07:00
Al Viro
b4482a4b2e more trivial signedness fixes in drivers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14 12:41:52 -07:00
Linus Torvalds
6a84258e5f Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (37 commits)
  PCI: merge almost all of pci_32.h and pci_64.h together
  PCI: X86: Introduce and enable PCI domain support
  PCI: Add 'nodomains' boot option, and pci_domains_supported global
  PCI: modify PCI bridge control ISA flag for clarity
  PCI: use _CRS for PCI resource allocation
  PCI: avoid P2P prefetch window for expansion ROMs
  PCI: skip ISA ioresource alignment on some systems
  PCI: remove transparent bridge sizing
  pci: write file size to inode on proc bus file write
  pci: use size stored in proc_dir_entry for proc bus files
  pci: implement "pci=noaer"
  PCI: fix IDE legacy mode resources
  MSI: Use correct data offset for 32-bit MSI in read_msi_msg()
  PCI: Fix incorrect argument order to list_add_tail() in PCI dynamic ID code
  PCI: i386: Compaq EVO N800c needs PCI bus renumbering
  PCI: Remove no longer correct documentation regarding MSI vector assignment
  PCI: re-enable onboard sound on "MSI K8T Neo2-FIR"
  PCI: quirk_vt82c586_acpi: Omit reading PCI revision ID
  PCI: quirk amd_8131_mmrbc: Omit reading pci revision ID
  cpqphp: Use PCI_CLASS_REVISION instead of PCI_REVISION_ID for read
  ...
2007-10-12 15:50:23 -07:00
Jeff Garzik
32a2eea795 PCI: Add 'nodomains' boot option, and pci_domains_supported global
* Introduce pci_domains_supported global, hardcoded to zero if
  !CONFIG_PCI_DOMAINS.

* Introduce 'nodomains' boot option, which clears pci_domains_supported
  on platforms that enable it by default (x86, x86-64, and others when
  they are converted to use this).

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:18 -07:00
Gary Hade
11949255d9 PCI: modify PCI bridge control ISA flag for clarity
Modify PCI Bridge Control ISA flag for clarity

This patch changes PCI_BRIDGE_CTL_NO_ISA to PCI_BRIDGE_CTL_ISA
and modifies it's clarifying comment and locations where used.
The change reduces the chance of future confusion since it makes
the set/unset meaning of the bit the same in both the bridge
control register and bridge_ctl field of the pci_bus struct.

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Acked-by: Linas Vepstas <linas@austin.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:18 -07:00
Gary Hade
fd64cb4606 PCI: avoid P2P prefetch window for expansion ROMs
Avoid creating P2P prefetch window for expansion ROMs

Because of the future possibility that P2P prefetch windows will contain
address ranges above 4GB some BIOSes are providing space in the P2P
non-prefetch windows for expansion ROMs.  This is due to expansion ROM
BAR 32-bit limitation.  When expansion ROM BARs without BIOS assigned
address(es) are currently found behind a P2P bridge, the kernel attempts
to create a P2P prefetch window for them even though space for them has
already been provided in the non-prefetch window.  _CRS on some systems
with certain resource conservation conscious BIOSes may not provide the
extra 1MB or more memory resource needed for the expansion ROM motivated
prefetch window causing resource allocation errors.

This change corrects the problem by removing IORESOURCE_PREFETCH from
the expansion ROM flags initialization.  It also removes
IORESOURCE_CACHEABLE which seems inappropriate if only non-cacheable
memory is available.

Signed-off-by: Gary Hade <gary.hade@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:18 -07:00
Gary Hade
036fff4cf7 PCI: skip ISA ioresource alignment on some systems
Skip ISA ioresource alignment on some systems

To conserve limited PCI i/o resource on some IBM multi-node systems, the
BIOS allocates (via _CRS) and expects the kernel to use addresses in
ranges currently excluded by pcibios_align_resource() [i386/pci/i386.c].
This change allows the kernel to use the currently excluded address
ranges on the IBM x3800, x3850, and x3950.

Signed-off-by: Gary Hade <gary.hade@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:18 -07:00
Gary Hade
8fa5913d54 PCI: remove transparent bridge sizing
Remove transparent bridge sizing.

Due to code in pci_read_bridge_bases() [drivers/pci/probe.c] the child
bus of a transparent bridge already has access to the parent bus
resources so transparent bridge sizing appears unnecessary.  The bridge
sizing includes alignment and granularity adjustments that can cause
significantly more memory to be reserved from the parant bus than
required by devices on the child bus and allotted by _CRS.

Signed-off-by: Gary Hade <gary.hade@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:17 -07:00
David Rientjes
ecb3908046 pci: write file size to inode on proc bus file write
When a /proc/bus/pci file is written to, the size of that PCI device's
configuration space must be written to the inode.  Otherwise, it is
possible for the file to specify a size of 0 on stat if a task is holding
the same file open.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:17 -07:00
David Rientjes
cd68602f36 pci: use size stored in proc_dir_entry for proc bus files
On pci_proc_attach_device(), the size of the PCI configuration space is
stored in the proc_dir_entry as the size of the file.  Thus, the procfs
interface to PCI devices should use it instead of the device directly.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:17 -07:00
Randy Dunlap
7f78576366 pci: implement "pci=noaer"
For cases in which CONFIG_PCIEAER=y (such as distro kernels), allow users
to disable PCIE Advanced Error Reporting by using "pci=noaer" on the
kernel command line.

This can be used to work around hardware or (kernel) software problems.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:17 -07:00
Yoichi Yuasa
fd6e732186 PCI: fix IDE legacy mode resources
I got the following error on MIPS Cobalt.

PCI: Unable to reserve I/O region #1:8@f00001f0 for device 0000:00:09.1
pata_via 0000:00:09.1: failed to request/iomap BARs for port 0 (errno=-16)
PCI: Unable to reserve I/O region #3:8@f0000170 for device 0000:00:09.1
pata_via 0000:00:09.1: failed to request/iomap BARs for port 1 (errno=-16)
pata_via 0000:00:09.1: no available native port

The legacy mode IDE resources set the following order.

pci_setup_device()
    Legacy mode ATA controllers have fixed addresses.
    IDE resources: 0x1F0-0x1F7, 0x3F6, 0x170-0x177, 0x376
    |
    V
pcibios_fixup_bus()
    MIPS Cobalt PCI bus regions have the -0x10000000 offset from PCI resources.
    pcibios_fixup_bus() fix PCI bus regions.
    0x1F0 - 0x10000000 = 0xF00001F0
    |
    V
ata_pci_init_one()
    PCI: Unable to reserve I/O region #1:8@f00001f0 for device 0000:00:09.1

In some architectures, PCI bus regions have the offset from PCI resources. 
For this reason, pci_setup_device() should set PCI bus regions to
dev->resource[].

[akpm@linux-foundation.org: use struct initialiser]
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:17 -07:00
Roland Dreier
cbf5d9e6b9 MSI: Use correct data offset for 32-bit MSI in read_msi_msg()
While reading the MSI code trying to find a reason why MSI wouldn't
work for devices that have a 32-bit MSI address capability, I noticed
that read_msi_msg() seems to read the message data from the wrong
offset in this case.

Signed-off-by: Roland Dreier <roland@digitalvampire.org>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:17 -07:00
Michael Ellerman
a56bc69a18 PCI: Fix incorrect argument order to list_add_tail() in PCI dynamic ID code
The code for dynamically assigning new ids to PCI drivers,
store_new_id(), calls list_add_tail() with the list head and new node
arguments in reversed order.

The result is that every new id written essentially overwrites the
previous list of ids.

Caught with the help of Rusty's "horribly bad" list_node patch:
 http://lkml.org/lkml/2007/6/10/10

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:17 -07:00
Johannes Goecke
346ca04d05 PCI: re-enable onboard sound on "MSI K8T Neo2-FIR"
On the "MSI K8T Neo2-FIR" board the BIOS disables the onboard
soundcard, if a second PCI soundcard is present.

This patch sets the korrect register bit to enable the onboard sound.

Removed old code in /drivers/pci/quirks.c that only checks for the
PCI-ID and fires on any Board with VIA 8237.

New code in /arch/i386/pci/fixup.c checks the DMI-tables and only runs
on the specific board.


Signed-off-by: Johannes Goecke <goecke@upb.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:16 -07:00
Auke Kok
651472fbff PCI: quirk_vt82c586_acpi: Omit reading PCI revision ID
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:16 -07:00
Auke Kok
aa288d4d6b PCI: quirk amd_8131_mmrbc: Omit reading pci revision ID
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Peter Oruba <peter.oruba@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:16 -07:00
Auke Kok
3799a4e7d8 cpqphp: Use PCI_CLASS_REVISION instead of PCI_REVISION_ID for read
While PCI_CLASS_REVISION and PCI_REVISION_ID are identical, the
code here discards the revision content and is only interested in
the class number.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Krosten Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:16 -07:00
Christoph Hellwig
fa007d8beb pci: hotplug: cpqphp: convert to kthread infrastructure
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:15 -07:00
Kristen Carlson Accardi
2d100fe8f6 pci: hotplug: ibmphp: convert to kthread
Convert ibmphp to new kthread api

Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:15 -07:00
vignesh babu
229f5afded PCI: is_power_of_2 in drivers/pci/pci.c
Replacing n & (n - 1) for power of 2 check by is_power_of_2(n)

Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:15 -07:00
Kenji Kaneshige
40730d1042 pciehp: minor cleanups for pciehp_hpc.c
Minor cleanups for pciehp_hpc.c. The 80 column rules, removing
unnecessary lines, and so on.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:15 -07:00
Kenji Kaneshige
9fe8164536 pciehp: remove trailing whitespace form pciehp_pci.c
Remove trailing whitespaces from pciehp_pci.c.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:14 -07:00
Kenji Kaneshige
36ed27b07b pciehp: remove trailing whitespace from pciehp_ctrl.c
Remove trailing whitespaces from pciehp_ctrl.c.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:14 -07:00
Kenji Kaneshige
a073a82674 pciehp: remove trailing whitespace from pciehp_core.c
Remove trailing whitespaces from pciehp_core.c.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:14 -07:00
Kenji Kaneshige
71ad556dad pciehp: remove trailing whitespace from pciehp_hpc.c
Remove trailing whitespaces from pciehp_hpc.c.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:14 -07:00
Kenji Kaneshige
c842648377 pciehp: remove DBG_XXX_ROUTINE
This patch removes DBG_ENTER_ROUTIN, DBG_LEAVE_ROUTINE and related
code, which seem no longer needed.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:14 -07:00
Kristen Carlson Accardi
57d90c0276 PCI Hotplug: pciehp: Request control over PCI Express Capability as well as Native hotplug
According to the PCI firmware spec (3.0), the OS must claim control
over the PCI Express Capability bits in addition to the PCI Express
Native Hot Plug feature when executing _OSC.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:14 -07:00
Kristen Carlson Accardi
1cf53d5ddb PCI Hotplug: pciehp: Dont check bridge control on remove
When removing a device with a bridge on it, only read the
bridge control register if the adapter is actually present.

Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:14 -07:00
Kenji Kaneshige
89913bf77a pciehp: remove CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE
Remove unnecessary CONFIG_HOTPLUG_PCI_PCIE_EVENT_MODE.

The CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE option is not needed
because polling mechanism can be enabled through 'pciehp_poll_mode'
module option.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:14 -07:00
Mariusz Kozlowski
73a985a140 PCI Hotplug: cpqphp_ctrl.c: kmalloc + memset conversion to kzalloc
drivers/pci/hotplug/cpqphp_ctrl.c | 79698 -> 79638 (-60 bytes)
 drivers/pci/hotplug/cpqphp_ctrl.o | 192896 -> 192736 (-160 bytes)

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:13 -07:00
Tejun Heo
5a7ad7f044 sysfs: kill sysfs_update_file()
sysfs_update_file() depends on inode->i_mtime but sysfs iondes are now
reclaimable making the reported modification time unreliable.  There's
only one user (pci hotplug) of this notification mechanism and it
reportedly isn't utilized from userland.

Kill sysfs_update_file().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:09 -07:00
Greg Kroah-Hartman
34980ca8fa Drivers: clean up direct setting of the name of a kset
A kset should not have its name set directly, so dynamically set the
name at runtime.

This is needed to remove the static array in the kobject structure which
will be changed in a future patch.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:02 -07:00
Greg Kroah-Hartman
19c38de88a kobjects: fix up improper use of the kobject name field
A number of different drivers incorrect access the kobject name field
directly.  This is not correct as the name might not be in the array.
Use the proper accessor function instead.
2007-10-12 14:51:02 -07:00
Kay Sievers
7eff2e7a8b Driver core: change add_uevent_var to use a struct
This changes the uevent buffer functions to use a struct instead of a
long list of parameters. It does no longer require the caller to do the
proper buffer termination and size accounting, which is currently wrong
in some places. It fixes a known bug where parts of the uevent
environment are overwritten because of wrong index calculations.

Many thanks to Mathieu Desnoyers for finding bugs and improving the
error handling.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:01 -07:00
Thomas Gleixner
fb9aa6f1d4 i386: move pci
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:16:36 +02:00
Benjamin Herrenschmidt
1bef7dc00c Fix bogus PCI quirk for e100
Linas reported me that some machines were crashing at boot in
quirk_e100_interrupt. It appears that this quirk is doing an ioremap
directly on a PCI BAR value, which isn't legal and will cause all sorts
of bad things to happen on architectures where PCI BARs don't directly
match processor bus addresses.

This fixes it by using the proper PCI resources instead which is possible
since the quirk has been moved by a previous commit to happen late enough
for that.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-28 16:21:10 -07:00
gw.kernel@tnode.com
d7698edca8 PCI: unhide SMBus on Compaq Deskpro EP 401963-001 motherboard
PCI quirk to unhide SMBus on Compaq Deskpro EP 401963-001 (PCA# 010174) motherboard.

Signed-off-by: Greg White <gw.kernel@tnode.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-11 04:22:16 -07:00
Ralf Baechle
e365c3e75e PCI: remove devinit from pci_read_bridge_bases
On MIPS with PCI && !HOTPLUG, I'm currently getting the following modpost
warning:

  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x1ce128): Section mismatch: reference to .init.text:pci_read_bridge_bases (between 'pcibios_fixup_bus' and 'pcibios_enable_device')

On MIPS I have the call chains pci_scan_child_bus -> pcibios_fixup_bus ->
pci_read_bridge_bases.  pci_scan_child_bus can't be __devinit because it
it is an exported symbol, thus pcibios_fixup_bus and pci_read_bridge_bases
can't be either.

For some reason I don't see this issue on x86; I blame compiler differences.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-11 04:22:16 -07:00
Len Brown
25c87f7f2a Pull events into release branch
Conflicts:

	drivers/acpi/video.c

Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-25 01:44:01 -04:00
Jeremy Fitzhardinge
5e1f198bbf acpiphp_ibm: add missing '\n' to error message
Add missing \n to error in ibm_find_acpi_device.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Adrian Bunk <trivial@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-25 01:39:13 -04:00
Len Brown
14e04fb34f ACPI: Schedule /proc/acpi/event for removal
Schedule /proc/acpi/event for removal in 6 months.

Re-name acpi_bus_generate_event() to acpi_bus_generate_proc_event()
to make sure there is no confusion that it is for /proc/acpi/event only.

Add CONFIG_ACPI_PROC_EVENT to allow removal of /proc/acpi/event.
There is no functional change if CONFIG_ACPI_PROC_EVENT=y

Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-23 15:20:26 -04:00
Zhang Rui
962ce8ca06 ACPI: don't duplicate input events on netlink
The previous events patch added a netlink event for every
user of the legacy /proc/acpi/event interface.

However, some users of /proc/acpi/event are really input events,
and they already report their events via the input layer.

Introduce a new interface, acpi_bus_generate_netlink_event(),
which is explicitly called by devices that want to repoprt
events via netlink.  This allows the input-like events
to opt-out of generating netlink events.  In summary:

events that are sent via netlink:
	ac/battery/sbs
	thermal
	processor
	thinkpad_acpi dock/bay

events that are sent via input layer:
	button
	video hotkey
	thinkpad_acpi hotkey
	asus_acpi/asus-laptop hotkey
	sonypi/sonylaptop

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-23 14:27:23 -04:00
Jean Delvare
18166c1a50 PCI: Run k8t_sound_hostbridge quirk only when needed
The k8t_sound_hostbridge PCI quick fires on my motherboard (Jetway
K8M8MS) while it shouldn't: the on-board sound chip is not disabled
and is working just fine. Looking at the code, I see that we are
running the quirk for two distinct register values (0x88 and 0xc8)
and then clear bit 6 (0x40). However value 0x88 already has bit 6
cleared so this is a no-op. This is what happens on my board. Thus I
believe that the quirk should only be run for register value 0xc8.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 14:48:41 -07:00
Tejun Heo
f122392f67 PCI: disable MSI on RX790
RX790 can't do MSI like its predecessors.  Disable MSI on RX790.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 14:48:41 -07:00
Tejun Heo
aea6a433f5 PCI: disable MSI on RD580
RD580 can't do MSI like its predecessors.  Disable MSI on RD580.

Signed-off-by: Tejun Heo <teheo@suse.de>
CC: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 14:48:41 -07:00
Tejun Heo
4be8f90643 PCI: disable MSI on RS690
RS690 can't do MSI like its predecessors.  Disable MSI on RS690.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Henry Su <henry.su@amd.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 14:48:41 -07:00
Bernhard Kaindl
d55bef515a PCI: lets kill the 'PCI hidden behind bridge' message
Adrian Bunk wrote:
> Alois Nešpor wrote
>> PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0b) (try 'pci=assign-busses')
>> Please report the result to linux-kernel to fix this permanently"
>>
>> dmesg:
>> "Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e"
>> without pci=assign-busses and nothing with pci=assign-busses.
> 
> Bernhard?

Ok, lets kill the message. As Alois Nešpor also saw, that's fixed up by Yenta,
so PCI does not have to warn about it. PCI could still warn about it if
is_cardbus is 0 in that instance of pci_scan_bridge(), but so far I have
not seen a report where this would have been the case so I think we can
spare the kernel of that check (removes ~300 lines of asm) unless debugging
is done.

History: The whole check was added in the days before we had the fixup
for this in Yenta and pci=assign-busses was the only way to get CardBus
cards detected on many (not all) of the machines which give this warning.

In theory, there could be cases when this warning would be triggered and
it's not cardbus, then the warning should still apply, but I think this
should only be the case when working on a completely broken PCI setup,
but one may have already enabled the debug code in drivers/pci and the
patched check would then trigger.

I do not sign this off yet because it's completely untested so far, but
everyone is free to test it (with the #ifdef DEBUG replaced by #if 1 and
pr_debug( changed to printk(.

We may also dump the whole check (remove everything within the #ifdef from
the source) if that's perferred.

On Alois Nešpor's machine this would then (only when debugging) this message:

"PCI: Bus #0b (-#0e) is partially hidden behind transparent bridge #0a (-#0b)"

"partially" should be in the message on his machine because #0b of #0b-#0e 
is reachable behind #0a-#0b, but not #0c-#0e.

But that differentiation is now moot anyway because the fixup in Yenta takes
care of it as far as I could see so far, which means that unless somebody
is debugging a totally broken PCI setup, this message is not needed anymore,
not even for debugging PCI.


Ok, here the patch with the following changes:

* Refined to say that the bus is only partially hidden when the parent
  bus numbers are not totally way off (outside of) the child bus range
* remove the reference to pci=assign-busses and the plea to report it

We could add a pure source code-only comment to keep a reference to
pci=assign-busses the in case when this is triggered by someone who
is debugging the cause of this message and looking the way to solve it.

From: Bernhard Kaindl <bk@suse.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 14:48:40 -07:00
Ingo Molnar
60ac8f20fe pci/hotplug/cpqphp_ctrl.c: remove stale BKL use
remove stale BKL use from drivers/pci/hotplug/cpqphp_ctrl.c.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 14:48:40 -07:00
Marian Balakowicz
4e68fc97b1 PCI: quirk_e100_interrupt() called too early
quirk_e100_interrupts() is called after PCI controller is initialized
and before PCI bus enumeration is performed. On some powerpc platforms
which modify PCI controller configuration and set different MEM and IO
windows than those set by firmware quirk_e100_interrupt() is causing
kernel panic as it tries to read from device BAR0 offets which at this
time points to a invalid PCI window (set by firmware).

This patch delays the quirk_100_interrupt() to pci_fixup_final phase,
which happens after bus enumeration and before PCI enable and
device driver initialization.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 14:48:40 -07:00
Kumar Gala
ce5ccdef10 PCI: Move prototypes for pci_bus_find_capability to include/linux/pci.h
We need pci_bus_find_capability() in some arch/powerpc code so move
the prototype into a header accessible to it.

Also kill the duplicate prototype for pci_bus_alloc_resource().

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 14:48:40 -07:00
Tejun Heo
0b62e13b5c pci: rename __pci_reenable_device() to pci_reenable_device()
Rename __pci_reenable_device() to pci_reenable_device().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01 10:00:56 -04:00
Randy Dunlap
42e61f4adb kernel-doc fixes for PCI and drivers/base/
Fix undocumented function parameters in PCI and drivers/base.

Warning(linux-2.6.23-rc1//drivers/pci/pci.c:1526): No description found for parameter 'rq'
Warning(linux-2.6.23-rc1//drivers/base/firmware_class.c:245): No description found for parameter 'bin_attr'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30 14:25:12 -07:00
Len Brown
673d5b43da ACPI: restore CONFIG_ACPI_SLEEP
Restore the 2.6.22 CONFIG_ACPI_SLEEP build option, but now shadowing the
new CONFIG_PM_SLEEP option.

Signed-off-by: Len Brown <len.brown@intel.com>
[ Modified to work with the PM config setup changes. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 16:53:59 -07:00
Linus Torvalds
a4fb2122f1 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: Kconfig: remove CONFIG_ACPI_SLEEP from source
  ACPI: quiet ACPI Exceptions due to no _PTC or _TSS
  ACPI: Remove references to ACPI_STATE_S2 from acpi_pm_enter
  ACPI: Kconfig: always enable CONFIG_ACPI_SLEEP on X86
  ACPI: Kconfig: fold /proc/acpi/sleep under CONFIG_ACPI_PROCFS
  ACPI: Kconfig: CONFIG_ACPI_PROCFS now defaults to N
  ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers
  ACPI: autoload modules - Create ACPI alias interface
  ACPI: autoload modules - ACPICA modifications
  ACPI: asus-laptop: Fix failure exits
  ACPI: fix oops due to typo in new throttling code
  ACPI: ignore _PSx method for hotplugable PCI devices
  ACPI: Use ACPI methods to select PCI device suspend state
  ACPI, PNP: hook ACPI D-state to PNP suspend/resume
  ACPI: Add acpi_pm_device_sleep_state helper routine
  ACPI: Implement the set_target() callback from pm_ops
2007-07-25 11:28:00 -07:00
Tejun Heo
f0a664bbd1 PCI: export __pci_reenable_device()
Some odd ACPI implementations choke if certain controller is disabled
when ACPI suspend is invoked but we still need to make sure the PCI
device is enabled during resume.  Simply using pci_enable_device()
unbalances device enable count.  Export __pci_reenable_device().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:55:01 -04:00
Shaohua Li
10b3dcae0f ACPI: ignore _PSx method for hotplugable PCI devices
If the ACPI device has _EJ0, ignore the device.
_PSx will set power for the slot,
and the hotplug driver will take care of _PSx.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22 04:18:45 -04:00
Shaohua Li
ab826ca4cf ACPI: Use ACPI methods to select PCI device suspend state
applied after Rafel's 'PM: Update global suspend and hibernation
operations framework' patch set

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22 04:18:32 -04:00
Yoann Padioleau
dd00cc486a some kmalloc/memset ->kzalloc (tree wide)
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).

Here is a short excerpt of the semantic patch performing
this transformation:

@@
type T2;
expression x;
identifier f,fld;
expression E;
expression E1,E2;
expression e1,e2,e3,y;
statement S;
@@

 x =
- kmalloc
+ kzalloc
  (E1,E2)
  ...  when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
- memset((T2)x,0,E1);

@@
expression E1,E2,E3;
@@

- kzalloc(E1 * E2,E3)
+ kcalloc(E1,E2,E3)

[akpm@linux-foundation.org: get kcalloc args the right way around]
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <bryan.wu@analog.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg KH <greg@kroah.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:50 -07:00
Linus Torvalds
489de30259 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (209 commits)
  [POWERPC] Create add_rtc() function to enable the RTC CMOS driver
  [POWERPC] Add H_ILLAN_ATTRIBUTES hcall number
  [POWERPC] xilinxfb: Parameterize xilinxfb platform device registration
  [POWERPC] Oprofile support for Power 5++
  [POWERPC] Enable arbitary speed tty ioctls and split input/output speed
  [POWERPC] Make drivers/char/hvc_console.c:khvcd() static
  [POWERPC] Remove dead code for preventing pread() and pwrite() calls
  [POWERPC] Remove unnecessary #undef printk from prom.c
  [POWERPC] Fix typo in Ebony default DTS
  [POWERPC] Check for NULL ppc_md.init_IRQ() before calling
  [POWERPC] Remove extra return statement
  [POWERPC] pasemi: Don't auto-select CONFIG_EMBEDDED
  [POWERPC] pasemi: Rename platform
  [POWERPC] arch/powerpc/kernel/sysfs.c: Move NUMA exports
  [POWERPC] Add __read_mostly support for powerpc
  [POWERPC] Modify sched_clock() to make CONFIG_PRINTK_TIME more sane
  [POWERPC] Create a dummy zImage if no valid platform has been selected
  [POWERPC] PS3: Bootwrapper support.
  [POWERPC] powermac i2c: Use mutex
  [POWERPC] Schedule removal of arch/ppc
  ...

Fixed up conflicts manually in:

	Documentation/feature-removal-schedule.txt
	arch/powerpc/kernel/pci_32.c
	arch/powerpc/kernel/pci_64.c
	include/asm-powerpc/pci.h

and asked the powerpc people to double-check the result..
2007-07-16 17:58:08 -07:00
Alexey Dobriyan
aa0ac36518 Remove capability.h from mm.h
I forgot to remove capability.h from mm.h while removing sched.h!  This
patch remedies that, because the only inline function which was using
CAP_something was made out of line.

Cross-compile tested without regressions on:

	all powerpc defconfigs
	all mips defconfigs
	all m68k defconfigs
	all arm defconfigs
	all ia64 defconfigs

	alpha alpha-allnoconfig alpha-defconfig alpha-up
	arm
	i386 i386-allnoconfig i386-defconfig i386-up
	ia64 ia64-allnoconfig ia64-defconfig ia64-up
	m68k
	mips
	parisc parisc-allnoconfig parisc-defconfig parisc-up
	powerpc powerpc-up
	s390 s390-allnoconfig s390-defconfig s390-up
	sparc sparc-allnoconfig sparc-defconfig sparc-up
	sparc64 sparc64-allnoconfig sparc64-defconfig sparc64-up
	um-x86_64
	x86_64 x86_64-allnoconfig x86_64-defconfig x86_64-up

as well as my two usual configs.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:45 -07:00
Andrew Morton
35ef63f635 use no_pci_devices() in pci/search.c
We have an API function for this now.

Cc: Zhang Yanmin <yanmin.zhang@intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:41 -07:00
Zhang, Yanmin
ed4aaadb1a fix jvc cdrom drive lockup
Before calling init_hwif_default, ide_unregister gets lock ide_lock and
disables irq.  init_hwif_default calls ide_default_io_base which calls
pci_get_device and later pci_get_subsys tries to apply for semaphore
pci_bus_sem and goes to sleep.

Mostly, pci_get_device should be called when irq is turned on.

ide_default_io_base just needs find if list pci_devices is empty.

Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:40 -07:00
Linus Torvalds
0806ca2ab3 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Support multiple CPUs going through OS_MCA
  [IA64] silence GCC ia64 unused variable warnings
  [IA64] prevent MCA when performing MMIO mmap to PCI config space
  [IA64] add sn_register_pmi_handler oemcall
  [IA64] Stop bit for brl instruction
  [IA64] SN: Correct ROM resource length for BIOS copy
  [IA64] Don't set psr.ic and psr.i simultaneously
2007-07-12 13:41:29 -07:00
Linus Torvalds
21ba0f88ae Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)
  PCI: Only build PCI syscalls on architectures that want them
  PCI: limit pci_get_bus_and_slot to domain 0
  PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure
  PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge
  PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3
  PCI: hotplug: pciehp: wait for 1 second after power off slot
  PCI: pci_set_power_state(): check for PM capabilities earlier
  PCI: cpci_hotplug: Convert to use the kthread API
  PCI: add pci_try_set_mwi
  PCI: pcie: remove SPIN_LOCK_UNLOCKED
  PCI: ROUND_UP macro cleanup in drivers/pci
  PCI: remove pci_dac_dma_... APIs
  PCI: pci-x-pci-express-read-control-interfaces cleanups
  PCI: Fix typo in include/linux/pci.h
  PCI: pci_ids, remove double or more empty lines
  PCI: pci_ids, add atheros and 3com_2 vendors
  PCI: pci_ids, reorder some entries
  PCI: i386: traps, change VENDOR to DEVICE
  PCI: ATM: lanai, change VENDOR to DEVICE
  PCI: Change all drivers to use pci_device->revision
  ...
2007-07-12 13:40:57 -07:00
Zhang Rui
91a6902958 sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes
Well, first of all, I don't want to change so many files either.

What I do:
Adding a new parameter "struct bin_attribute *" in the
.read/.write methods for the sysfs binary attributes.

In fact, only the four lines change in fs/sysfs/bin.c and
include/linux/sysfs.h do the real work.
But I have to update all the files that use binary attributes
to make them compatible with the new .read and .write methods.
I'm not sure if I missed any. :(

Why I do this:
For a sysfs attribute, we can get a pointer pointing to the
struct attribute in the .show/.store method,
while we can't do this for the binary attributes.
I don't know why this is different, but this does make it not
so handy to use the binary attributes as the regular ones.
So I think this patch is reasonable. :)

Who benefits from it:
The patch that exposes ACPI tables in sysfs
requires such an improvement.
All the table binary attributes share the same .read method.
Parameter "struct bin_attribute *" is used to get
the table signature and instance number which are used to
distinguish different ACPI table binary attributes.

Without this parameter, we need to offer different .read methods
for different ACPI table binary attributes.
This is impossible as there are various ACPI tables on different
platforms, and we don't know what they are until they are loaded.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:09 -07:00
Tejun Heo
7b595756ec sysfs: kill unnecessary attribute->owner
sysfs is now completely out of driver/module lifetime game.  After
deletion, a sysfs node doesn't access anything outside sysfs proper,
so there's no reason to hold onto the attribute owners.  Note that
often the wrong modules were accounted for as owners leading to
accessing removed modules.

This patch kills now unnecessary attribute->owner.  Note that with
this change, userland holding a sysfs node does not prevent the
backing module from being unloaded.

For more info regarding lifetime rule cleanup, please read the
following message.

  http://article.gmane.org/gmane.linux.kernel/510293

(tweaked by Greg to not delete the field just yet, to make it easier to
merge things properly.)

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:06 -07:00
Matthew Wilcox
36e235901f PCI: Only build PCI syscalls on architectures that want them
The PCI syscalls are built on every architecture except X86, but only
a few have ever hooked them up.  Use a new Kconfig symbol to save a
couple of kB on the architectures that have never used the syscalls.
Tested on x86 and ia64 only.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:13 -07:00
Randy Dunlap
5463d9f0f3 PCI: limit pci_get_bus_and_slot to domain 0
Limit pci_get_bus_and_slot() to domain (segment) 0 since domain is not
specified in the function call and defaulting to domain 0 is the only
reasonable thing to do (rather than returning a device from some other
unknown domain).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:13 -07:00
Gary Hade
0bbd6424c5 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure
On some systems, the ACPI bus check event can reference a bridge that is
higher in the ACPI hierarchy than the bridge immediately above the
hotplug PCI slot into which an adapter was just inserted.  The current
'acpiphp' code expects the bus check event to reference the bridge
immediately above the slot that received the adapter so the hotplug
operation can fail on these systems with the message "acpiphp_glue:
cannot get bridge info".  This change fixes the problem by
re-enumerating all slots that lie below the bridge referenced by the bus
check event, including those slots that may be located under lower level
PCI-to-PCI bridge(s).

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Cc: <lcm@us.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:13 -07:00
Gary Hade
9ef2241b18 PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge
acpiphp is writing hot plug parameters to the PCI host bridge
PCI config space.  This patch removes the incorrect operation.

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Cc: <lcm@us.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:13 -07:00
Gary Hade
bfceafc597 PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3
On systems where the optional _PS3 ACPI object is not implemented
acpiphp fails to power off the slot.  This is happening because the
current code does not attempt to remove power using the _EJ0 ACPI
object.  This patch restores the _EJ0 evaluation attempt which was
apparently inadvertently removed from the power-off sequence when the
_EJ0 evaluation code was relocated from power_off_slot() to
acpiphp_eject_slot().

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Cc: <lcm@us.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:12 -07:00
Kenji Kaneshige
5b57a6cea4 PCI: hotplug: pciehp: wait for 1 second after power off slot
According to the specification, we must wait for at least 1 second
after turning power off before taking any action that relies on power
having been removed from the slot/adapter.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:12 -07:00
Andrew Lunn
cca03dec2f PCI: pci_set_power_state(): check for PM capabilities earlier
Check for PCI_CAP_ID_PM before checking the device state.  Apparently fixes
some log spam via the 3c59x driver.

Signed-off-by: Andrew Lunn <andrew.lunn@ascom.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:12 -07:00
Scott Murray
0bec2c85bb PCI: cpci_hotplug: Convert to use the kthread API
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Scott Murray <scottm@somanetworks.com>
Acked-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:11 -07:00
Randy Dunlap
694625c0b3 PCI: add pci_try_set_mwi
As suggested by Andrew, add pci_try_set_mwi(), which does not require
return-value checking.

- add pci_try_set_mwi() without __must_check
- make it return 0 on success, errno if the "try" failed or error
- review callers

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:11 -07:00
Milind Arun Choudhary
f5609d7e67 PCI: pcie: remove SPIN_LOCK_UNLOCKED
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:11 -07:00
Milind Arun Choudhary
6f6f8c2f4b PCI: ROUND_UP macro cleanup in drivers/pci
ROUND_UP macro cleanup, use ALIGN where ever appropriate

Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Acked-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:11 -07:00
Andrew Morton
b7b095c154 PCI: pci-x-pci-express-read-control-interfaces cleanups
- remove unneeded local

- 80-col fix

Cc: Peter Oruba <peter.oruba@amd.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:11 -07:00
Auke Kok
44c10138fd PCI: Change all drivers to use pci_device->revision
Instead of all drivers reading pci config space to get the revision
ID, they can now use the pci_device->revision member.

This exposes some issues where drivers where reading a word or a dword
for the revision number, and adding useless error-handling around the
read. Some drivers even just read it for no purpose of all.

In devices where the revision ID is being copied over and used in what
appears to be the equivalent of hotpath, I have left the copy code
and the cached copy as not to influence the driver's performance.

Compile tested with make all{yes,mod}config on x86_64 and i386.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:10 -07:00
Auke Kok
b8a3a5214d PCI: read revision ID by default
Currently there are 97 occurrences where drivers need the pci
revision ID. We can do this once for all devices. Even the pci
subsystem needs the revision several times for quirks. The extra
u8 member pads out nicely in the pci_dev struct.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:09 -07:00
Adrian Bunk
e57571a07d PCI: unexport pci_proc_attach_device
On Mon, Apr 02, 2007 at 10:47:45PM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.21-rc5-mm3:
>...
> +fix-82875-pci-setup.patch
>...
>  Misc
>...


pci_proc_attach_device() no longer has any modular user.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:08 -07:00
Stephen Hemminger
f0dce41193 PCI aer: add pci_cleanup_aer_correct_aer_status
Function to clear bogus correctable errors. Analog to pci_aer_uncorrect_are_status.
The Marvell chips seem to start out with a bogus value that needs to be
cleared.

Yanmin ported it to 2.6.22-rc4 by fixing a fuzz patch applying info.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Acked-by: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:08 -07:00
Zhang, Yanmin
8d29bfb79e PCI: fix AER driver error information
Below patch fixes aer driver error information and enables aer driver
although CONFIG_ACPI=n.

As a matter of fact, the new patch is created from below 2 patches plus
a minor patch apply fuzz fixing. Because the second patch fixed a compilation
error introduced by the first patch, I merge them to facilitate bisect.


1) http://marc.info/?l=linux-kernel&m=117783233918191&w=2;
2) http://marc.info/?l=linux-mm-commits&m=118046936720790&w=2


Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:08 -07:00
Kenji Kaneshige
f477836457 PCI: hotplug: pciehp: Fix possible race condition in writing slot
The slot control register is modified as follows:

    (1) Read the register value
    (2) Change the value
    (3) Write the value to the register

Those must be done atomically, otherwise writing to control register
would cause an unexpected result.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:08 -07:00
Michael Ellerman
a2cd52ca90 PCI: Make pcibios_add_platform_entries() return errors
Currently pcibios_add_platform_entries() returns void, but could fail,
so instead have it return an int and propagate errors up to
pci_create_sysfs_dev_files().

Fixes:
arch/powerpc/kernel/pci_64.c: In function 'pcibios_add_platform_entries':
arch/powerpc/kernel/pci_64.c:878: warning: ignoring return value of
	'device_create_file', declared with attribute warn_unused_result
arch/powerpc/kernel/pci_32.c: In function 'pcibios_add_platform_entries':
  arch/powerpc/kernel/pci_32.c:1043: warning: ignoring return value of
	'device_create_file', declared with attribute warn_unused_result

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:07 -07:00
Michael Ellerman
575e3348cb PCI: Use a weak symbol for the empty version of pcibios_add_platform_entries()
I'm not sure if this is going to fly, weak symbols work on the compilers I'm
using, but whether they work for all of the affected architectures I can't say.
I've cc'ed as many arch maintainers/lists as I could find.

But assuming they do, we can use a weak empty definition of
pcibios_add_platform_entries() to avoid having an empty definition on every
arch.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:07 -07:00
Peter Oruba
d556ad4bbe PCI: add PCI-X/PCI-Express read control interfaces
This patch introduces an interface to read and write PCI-X / PCI-Express 
maximum read byte count values from PCI config space. There is a second 
function that returns the maximum _designed_ read byte count, which marks the 
maximum value for a device, since some drivers try to set MMRBC to the 
highest allowed value and rely on such a function.

Based on patch set by Stephen Hemminger <shemminger@linux-foundation.org>

Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Peter Oruba <peter.oruba@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:07 -07:00
Alan Cox
e4585da22a pci syscall.c: Switch to refcounting API
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:07 -07:00
Greg Kroah-Hartman
a23adb5b2d PCI: point people to Bernhard instead of the linux-kernel list
Back in commit 8c4b2cf9af, Bernhard said
that he would fix up all instances of when this message happens.  So
point people at him instead of the linux-kernel list which can not fix
things up.

Cc: Bernhard Kaindl <bk@suse.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Miles Lane <miles.lane@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:06 -07:00
John Keller
d7ad2254fa [IA64] SN: Correct ROM resource length for BIOS copy
On SN systems, when setting the IORESOURCE_ROM_BIOS_COPY resource flag,
the resource length should be set to the actual size of the ROM image
so that a call to pci_map_rom() returns the correct size.

Signed-off-by: John Keller <jpk@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-09 13:37:18 -07:00
Benjamin Herrenschmidt
3d5134ee83 [POWERPC] Rewrite IO allocation & mapping on powerpc64
This rewrites pretty much from scratch the handling of MMIO and PIO
space allocations on powerpc64.  The main goals are:

 - Get rid of imalloc and use more common code where possible
 - Simplify the current mess so that PIO space is allocated and
   mapped in a single place for PCI bridges
 - Handle allocation constraints of PIO for all bridges including
   hot plugged ones within the 2GB space reserved for IO ports,
   so that devices on hotplugged busses will now work with drivers
   that assume IO ports fit in an int.
 - Cleanup and separate tracking of the ISA space in the reserved
   low 64K of IO space. No ISA -> Nothing mapped there.

I booted a cell blade with IDE on PIO and MMIO and a dual G5 so
far, that's it :-)

With this patch, all allocations are done using the code in
mm/vmalloc.c, though we use the low level __get_vm_area with
explicit start/stop constraints in order to manage separate
areas for vmalloc/vmap, ioremap, and PCI IOs.

This greatly simplifies a lot of things, as you can see in the
diffstat of that patch :-)

A new pair of functions pcibios_map/unmap_io_space() now replace
all of the previous code that used to manipulate PCI IOs space.
The allocation is done at mapping time, which is now called from
scan_phb's, just before the devices are probed (instead of after,
which is by itself a bug fix). The only other caller is the PCI
hotplug code for hot adding PCI-PCI bridges (slots).

imalloc is gone, as is the "sub-allocation" thing, but I do beleive
that hotplug should still work in the sense that the space allocation
is always done by the PHB, but if you unmap a child bus of this PHB
(which seems to be possible), then the code should properly tear
down all the HPTE mappings for that area of the PHB allocated IO space.

I now always reserve the first 64K of IO space for the bridge with
the ISA bus on it. I have moved the code for tracking ISA in a separate
file which should also make it smarter if we ever are capable of
hot unplugging or re-plugging an ISA bridge.

This should have a side effect on platforms like powermac where VGA IOs
will no longer work. This is done on purpose though as they would have
worked semi-randomly before. The idea at this point is to isolate drivers
that might need to access those and fix them by providing a proper
function to obtain an offset to the legacy IOs of a given bus.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14 22:29:56 +10:00
Eric W. Biederman
78b7611c4a msi: mask the msix vector before we unmap it
With these two lines in the reverse order the drives/block/ccis.c was
oopsing in msi_free_irqs.  Silly us calling writel on an area after
we unmap it.

BUG: unable to handle kernel paging request at virtual address f8b2200c
 printing eip:
c01e9cc7
*pdpt = 0000000000003001
*pde = 0000000037e48067
*pte = 0000000000000000
Oops: 0002 [#1]
SMP
Modules linked in: cciss ipv6 parport_pc lp parport autofs4 i2c_dev i2c_core
sunrpc loop dm_multipath button battery asus_acpi ac tg3 floppy sg dm_snapshot
dm_zero dm_mirror ext3 jbd dm_mod ata_piix libata mptsas scsi_transport_sas
mptspi scsi_transport_spi mptscsih mptbase sd_mod scsi_mod
CPU:    1
EIP:    0060:[<c01e9cc7>]    Not tainted VLI
EFLAGS: 00010286   (2.6.22-rc2-gd2579053 #1)
EIP is at msi_free_irqs+0x81/0xbe
eax: f8b22000   ebx: f71f3180   ecx: f7fff280   edx: c1886eb8
esi: f7c4e800   edi: f7c4ec48   ebp: 00000002   esp: f5a0dec8
ds: 007b   es: 007b   fs: 00d8  gs: 0033  ss: 0068
Process rmmod (pid: 5286, ti=f5a0d000 task=c47d2550 task.ti=f5a0d000)
Stack: 00000002 f8b72294 00000400 f8b69ca7 f8b6bc6c 00000002 00000000 00000000
       00000000 00000000 00000000 f5a997f4 f8b69d61 f7c5a4b0 f7c4e848 f7c4e848
       f7c4e800 f7c4e800 f8b72294 f7c4e848 f8b72294 c01e3cdf f7c4e848 c024c469
Call Trace:
 [<f8b69ca7>] cciss_shutdown+0xae/0xc3 [cciss]
 [<f8b69d61>] cciss_remove_one+0xa5/0x178 [cciss]
 [<c01e3cdf>] pci_device_remove+0x16/0x35
 [<c024c469>] __device_release_driver+0x71/0x8e
 [<c024c56e>] driver_detach+0xa0/0xde
 [<c024bc5c>] bus_remove_driver+0x27/0x41
 [<c01e3ef3>] pci_unregister_driver+0xb/0x13
 [<f8b6a343>] cciss_cleanup+0xf/0x51 [cciss]
 [<c0139ced>] sys_delete_module+0x110/0x135
 [<c0104c7a>] sysenter_past_esp+0x5f/0x85

Here's a patch that just reverses the 2 lines of code as Eric suggests. Please
consider this for inclusion.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Chase Maupin <chase.maupin@hp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01 08:18:27 -07:00
Eric W. Biederman
0dd11f9be4 msi: fix the ordering of msix irqs
"Mike Miller (OS Dev)" <mikem@beardog.cca.cpqcorp.net> writes:

Found what seems the problem with our vectors being listed backward.  In
drivers/pci/msi.c we should be using list_add_tail rather than list_add to
preserve the ordering across various kernels.  Please consider this for
inclusion.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Screwed-up-by: Michael Ellerman <michael@ellerman.id.au>
Cc: "Mike Miller (OS Dev)" <mikem@beardog.cca.cpqcorp.net>
Cc: Andi Kleen <ak@suse.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01 08:18:27 -07:00
Jay Cliburn
184b812f7d PCI: quirk disable MSI on via vt3351
The Via VT3351 APIC does not play well with MSI and unleashes a flood
of APIC errors when MSI is used to deliver interrupts.  The problem
was recently exposed when the atl1 network device driver, which enables
MSI by default, stimulated APIC errors on an Asus M2V mainboard, which
employs the Via VT3351.
See http://bugzilla.kernel.org/show_bug.cgi?id=8472 for additional
details on this bug.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 16:56:37 -07:00
Ben Gardner
3c92c57af9 PCI: Fix pci_find_present
pci_find_present() is only matching the last item in the list of ids.

The break after the match is found only escapes the for loop, not the
while loop, so found gets reset to NULL on the next pass.

Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 16:56:37 -07:00
Andy Gospodarek
e3008dedff PCI: disable MSI by default on systems with Serverworks HT1000 chips
I've been seeing lots of messages like these:

eth0: No interrupt was generated using MSI, switching to INTx mode.  Please
report this failure to the PCI maintainer and include system chipset
information.

On several systems that use the following Severworks HT1000 (also sometimes
labeled as a Broadcom chipset as well) bridge chips.  It doesn't appear MSI
works well (if at all) on these systems.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 16:56:36 -07:00
Dan Williams
4fdadebc31 msi: fix ARM compile
In file included from drivers/pci/msi.c:22:
include/asm/smp.h:17:26: asm/arch/smp.h: No such file or directory
include/asm/smp.h:20:3: #error "<asm-arm/smp.h> included in non-SMP build"
include/asm/smp.h:23:1: warning: "raw_smp_processor_id" redefined
In file included from include/linux/sched.h:65,
                 from include/linux/mm.h:4,
                 from drivers/pci/msi.c:10:
include/linux/smp.h:85:1: warning: this is the location of the previous
definition

Tested on powerpc, i386, and x86_64.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 16:56:36 -07:00
Tejun Heo
ebdf7d399e pci-quirks: fix MSI disabling on RS400-200 and RS480
Commit c0affe9db4 doesn't work because
the host controller is being quirked not a PCI bridge.  This patch
reverts the commit, rename quirk_svw_msi() to quirk_disable_all_msi()
and use it instead.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Matias Alejandro Torres <torresmat@gmail.com>
Cc: Greg K-H <greg@kroah.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-31 07:58:13 -07:00
Alexey Dobriyan
e8edc6e03a Detach sched.h from mm.h
First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
   getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
   they don't need sched.h
b) sched.h stops being dependency for significant number of files:
   on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
   after patch it's only 3744 (-8.3%).

Cross-compile tested on

	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
	alpha alpha-up
	arm
	i386 i386-up i386-defconfig i386-allnoconfig
	ia64 ia64-up
	m68k
	mips
	parisc parisc-up
	powerpc powerpc-up
	s390 s390-up
	sparc sparc-up
	sparc64 sparc64-up
	um-x86_64
	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 09:18:19 -07:00
Al Viro
8eafafb54b rpadlpar breakage - fallout of struct subsystem removal
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15 18:56:37 -07:00
Linus Torvalds
fb2c922b85 Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_platform: don't use generic ata_port_start
  Use menuconfig objects: libata
  add the ATI SB700 SATA controller device id to AHCI pci table
  Add the combined mode for ATI SB700
  pata_pcmcia: recognize 2GB CompactFlash from Transcend
  git-libata-all: sata_via build fix
  libata-acpi: clean up parameters and misc stuff
  libata-acpi: s/CONFIG_SATA_ACPI/CONFIG_ATA_ACPI/
  libata: give devices one last chance even if recovery failed with -EINVAL
  libata: fallback to the other IDENTIFY on device error, take#2
  libata: ignore EH scheduling during initialization
  libata: clean up SFF init mess
  libata: implement libata.spindown_compat
  libata: reimplement suspend/resume support using sdev->manage_start_stop
2007-05-11 16:03:03 -07:00
David Miller
b3b7cc7b41 Fix assertion failure with MSI on sparc64
Today's find is a triggered assertion in msi_free_irqs() when the system
doesn't support MSI, in which case arch_setup_msi_irqs() always returns
an error.

The problem is that when this happens we branch into msi_free_irqs(), to
which you added the following assertion loop:

	list_for_each_entry(entry, &dev->msi_list, list)
		BUG_ON(irq_has_action(entry->irq));

Well, if arch_setup_msi_irqs() fails, entry->irq will be zero and
although that's never assigned to any normal devices we use that IRQ
number for the timer interrupt on sparc64 so this assertion triggers.

Better to test for zero before doing the irq_has_action() assertion
thing.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 16:01:18 -07:00
Henry Su
823777181b Add the combined mode for ATI SB700
Besides those modes in ATI SB600 SATA controller, ATI SB700 supports one
more mode:the combined mode.

The combined mode is a Legacy IDE mode used for compatibility with some old
OS without AHCI driver, but now it is not necessary for Linux since the
kernel has supported AHCI.

Signed-off-by: Luugi Marsan <luugi.marsan@amd.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11 18:16:01 -04:00
Tony Luck
34ef30ca4a [IA64] Fix warnings resulting from type-checking in dev_dbg()
Lots of places where we passed a "struct pci_device *" rather than
a "struct device *".  One place where we used a "%s" in the format,
but forgot to provide an argument.

Acked-by: John Keller <jpk@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-10 09:39:41 -07:00
Randy Dunlap
8b60756a62 Fix more "deprecated" spellos.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 07:19:14 +02:00
Linus Torvalds
df6d3916f3 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (77 commits)
  [POWERPC] Abolish powerpc_flash_init()
  [POWERPC] Early serial debug support for PPC44x
  [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc
  [POWERPC] Add device tree for Ebony
  [POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for now
  [POWERPC] MPIC U3/U4 MSI backend
  [POWERPC] MPIC MSI allocator
  [POWERPC] Enable MSI mappings for MPIC
  [POWERPC] Tell Phyp we support MSI
  [POWERPC] RTAS MSI implementation
  [POWERPC] PowerPC MSI infrastructure
  [POWERPC] Rip out the existing powerpc msi stubs
  [POWERPC] Remove use of 4level-fixup.h for ppc32
  [POWERPC] Add powerpc PCI-E reset API implementation
  [POWERPC] Holly bootwrapper
  [POWERPC] Holly DTS
  [POWERPC] Holly defconfig
  [POWERPC] Add support for 750CL Holly board
  [POWERPC] Generalize tsi108 PCI setup
  [POWERPC] Generalize tsi108 PHY types
  ...

Fixed conflict in include/asm-powerpc/kdebug.h manually

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:50:19 -07:00
Randy Dunlap
e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Paul Mackerras
02bbc0f09c Merge branch 'linux-2.6' 2007-05-08 13:37:51 +10:00
Linus Torvalds
5b33991576 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  remove "struct subsystem" as it is no longer needed
  sysfs: printk format warning
  DOC: Fix wrong identifier name in Documentation/driver-model/devres.txt
  platform: reorder platform_device_del
  Driver core: fix show_uevent from taking up way too much stack
2007-05-04 18:04:48 -07:00
Michael Ellerman
9890b12a4a PCI: Free resource files in error path of pci_create_sysfs_dev_files()
pci_create_sysfs_dev_files() should call pci_remove_resource_files() in
its error path, to match the call it makes to pci_create_resource_files().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:43 -07:00
Tejun Heo
c0affe9db4 pci-quirks: disable MSI on RS400-200 and RS480
MSI doesn't work on RS400-200 and RS480 requiring pci=nomsi kernel
boot parameter for ahci to work.  This patch disables MSI on those
chips.

  http://thread.gmane.org/gmane.linux.ide/17820
  http://thread.gmane.org/gmane.linux.ide/17516
  https://bugzilla.novell.com/show_bug.cgi?id=263893

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:43 -07:00
Jan Engelhardt
d4770143fe PCI hotplug: Use menuconfig objects
Use menuconfigs instead of menus, so the whole menu can be disabled at
once instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:42 -07:00
Scott Murray
03555d591d PCI: ZT5550 CPCI Hotplug driver fix
cc: Philip Guo <pg@cs.stanford.edu>

Here's a small patch against the current git tree for the ZT5550 CPCI 
hotplug driver to fix an issue with port freeing that Philip Guo found.

Signed-off-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:40 -07:00
Linas Vepstas
ac1f0e9923 PCI: rpaphp: Remove semaphores
Remove the semaphores from the get routine. These do not 
appear to be protecting anything that I can make out, 
and they also do not seem to be required by the hotplug
driver.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:40 -07:00
Linas Vepstas
b5661479ee PCI: rpaphp: Ensure more pcibios_add/pcibios_remove symmetry
Calls to pcibios_add should be symmetric with calls to pcibios_remove.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:40 -07:00
Linas Vepstas
e70ea2634a PCI: rpaphp: Use pcibios_remove_pci_devices() symmetrically
At first blush, the disable_slot() routine does not look
at all like its symmetric with the enable_slot() routine;
as it seems to call a very different set of routines.
However, this is easily fixed: pcibios_remove_pci_devices()
does the right thing.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:40 -07:00
Linas Vepstas
da65944be2 PCI: rpaphp: Document is_php_dn()
Fix up the documentation: the rpaphp_add_slot() does not actually
handle embedded slots: in fact, it ignores them. Fix the flow of
control in the routine that checks for embedded slots.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:40 -07:00
Linas Vepstas
8485d1a123 PCI: rpaphp: Document find_php_slot()
Document some of the interaction between dlpar and hotplug.
viz, the a dlpar remove of a htoplug slot uses hotplug to remove it.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:40 -07:00
Linas Vepstas
fea54b8cc9 PCI: rpaphp: Rename rpaphp_register_pci_slot() to rpaphp_enable_slot()
Rename rpaphp_register_pci_slot() because its easy to confuse
with  rpaphp_register_slot() even though it does something 
completely different. Rename it to rpaphp_enable_slot() because
its almost identical to enbale_slot().

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:40 -07:00
Linas Vepstas
6f79eb749d PCI: rpaphp: refactor tail call to rpaphp_register_slot()
Eliminate the tail call to rpaphp_register_slot() 
by placing it in the caller. This will help later
dis-entanglement.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:40 -07:00
Linas Vepstas
c02929c278 PCI: rpaphp: remove rpaphp_set_attention_status()
The rpaphp_set_attention_status() routine seems to be a wrapper
around a single rtas call. Abolish it.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:39 -07:00
Linas Vepstas
307ff12e35 PCI: rpaphp: remove print_slot_pci_funcs()
The debug function print_slot_pci_funcs() is a large wrapper
around two debug print statements.  Just invoke these directly.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:39 -07:00
Linas Vepstas
03a6675591 PCI: rpaphp: Remove setup_pci_slot()
The setup_pci_slot() routine appears to be nothing else than
a big, complicated wrapper around pcibios_add_pci_devices().
Remove the wrapping, and call pcibios_add_pci_devices() directly.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:39 -07:00
Linas Vepstas
ebf42c0edd PCI: rpaphp: remove a call that does nothing but a pointer lookup
Delete another stovepipe: a call to a routine which does nothing.
Remove un-needed semaphore as well.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:39 -07:00
Linas Vepstas
bf0af511fc PCI: rpaphp: Remove another wrappered function
Remove another stove-pipe; this funcion was called from
two different places, with a compile-time const that is
then run-time checked to perform two different things.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:39 -07:00
Linas Vepstas
427310ff02 PCI: rpaphp: Remve another call that is a wrapper
Remove another stovepipe: a call which wraps another call, and
just adds printks.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:39 -07:00
Linas Vepstas
517d5a0417 PCI: rpaphp: remove a function that does nothing but wrap debug printks
Remove a stove-pipe-- a function that is called from only one place, 
does nothing but wraps another function with debug printk's.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:39 -07:00
Linas Vepstas
3499f0726e PCI: rpaphp: Remove un-needed goto
Remove un-needed goto.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:39 -07:00
Linas Vepstas
5fd39c35a0 PCI: rpaphp: Fix a memleak; slot->location string was never freed
Fix a memleak; the slot->location string was never freed.
Fix some whitespace and overlong-line probelms while we're here.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:39 -07:00
Linas Vepstas
31be7586d1 PCI: rpaphp: match up alloc and free in same routine
The routine that called an alloc should be the same routine that 
calles the mathcing free, if anything in the middle failed.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:38 -07:00