PNPACPI complained about and ignored devices with ADDRESS16, ADDRESS32, or
ADDRESS64 descriptors in _PRS. HP firmware uses them for built-in serial
ports, so this patch adds support for parsing these descriptors from _PRS.
Note that this does not add the corresponding support for encoding them in
preparation for _SRS, because I don't have any machine that supports _SRS
on these descriptors, so I couldn't test that support. Attempts to encode
them will cause a warning and an -EINVAL return.
http://sourceforge.net/mailarchive/forum.php?thread_id=8250154&forum_id=6102
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
I've spent the past 3 days digging into a glibc testsuite failure in
current CVS, specifically libc/rt/tst-cputimer1.c The thr1 and thr2
timers fire too early in the second pass of this test. The second
pass is noteworthy because it makes use of intervals, whereas the
first pass does not.
All throughout the posix-cpu-timers.c code, the calculation of the
process sched_time sum is implemented roughly as:
unsigned long long sum;
sum = tsk->signal->sched_time;
t = tsk;
do {
sum += t->sched_time;
t = next_thread(t);
} while (t != tsk);
In fact this is the exact scheme used by check_process_timers().
In the case of check_process_timers(), current->sched_time has just
been updated (via scheduler_tick(), which is invoked by
update_process_times(), which subsequently invokes
run_posix_cpu_timers()) So there is no special processing necessary
wrt. that.
In other contexts, we have to allot for the fact that tsk->sched_time
might be a bit out of date if we are current. And the
posix-cpu-timers.c code uses current_sched_time() to deal with that.
Unfortunately it does so in an erroneous and inconsistent manner in
one spot which is what results in the early timer firing.
In cpu_clock_sample_group_locked(), it does this:
cpu->sched = p->signal->sched_time;
/* Add in each other live thread. */
while ((t = next_thread(t)) != p) {
cpu->sched += t->sched_time;
}
if (p->tgid == current->tgid) {
/*
* We're sampling ourselves, so include the
* cycles not yet banked. We still omit
* other threads running on other CPUs,
* so the total can always be behind as
* much as max(nthreads-1,ncpus) * (NSEC_PER_SEC/HZ).
*/
cpu->sched += current_sched_time(current);
} else {
cpu->sched += p->sched_time;
}
The problem is the "p->tgid == current->tgid" test. If "p" is
not current, and the tgids are the same, we will add the process
t->sched_time twice into cpu->sched and omit "p"'s sched_time
which is very very very wrong.
posix-cpu-timers.c has a helper function, sched_ns(p) which takes care
of this, so my fix is to use that here instead of this special tgid
test.
The fact that current can be one of the sub-threads of "p" points out
that we could make things a little bit more accurate, perhaps by using
sched_ns() on every thread we process in these loops. It also points
out that we don't use the most accurate value for threads in the group
actively running other cpus (and this is mentioned in the comment).
But that is a future enhancement, and this fix here definitely makes
sense.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch should fix compilation failure of fs/ufs/dir.c with defined UFS_DIR_DEBUG
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This greatly reduces the amount of memory used by mmtimer on smaller
machines with large values of MAX_COMPACT_NODES.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap: "Dave is no longer at OSDL and is no longer maintaining
that driver."
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch contains two corrections to the LSM-IPsec Nethooks patches
previously applied.
(1) free a security context on a failed insert via xfrm_user
interface in xfrm_add_policy. Memory leak.
(2) change the authorization of the allocation of a security context
in a xfrm_policy or xfrm_state from both relabelfrom and relabelto
to setcontext.
Signed-off-by: Trent Jaeger <tjaeger@cse.psu.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
pktgen_find_thread() and pktgen_create_thread() are only called at
initialization time.
Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
It looks like the bridge netfilter code does not correctly update
the hardware checksum after popping off the VLAN header.
This is by inspection, I have *not* tested this.
To test you would need to set up a filtering bridge with vlans
and a device the does hardware receive checksum (skge, or sungem)
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a user-space server application calls bind on a socket, then in kernel
space this bound socket is considered 'x25-linked' and the SOCK_ZAPPED flag
is unset.(As in x25_bind()/af_x25.c).
Now when a user-space client application attempts to connect to the server
on the listening socket, if the kernel accepts this in-coming call, then it
returns a new socket to userland and attempts to reply to the caller.
The reply/x25_sendmsg() will fail, because the new socket created on
call-accept has its SOCK_ZAPPED flag set by x25_make_new().
(sock_init_data() called by x25_alloc_socket() called by x25_make_new()
sets the flag to SOCK_ZAPPED)).
Fix: Using the sock_copy_flag() routine available in sock.h fixes this.
Tested on 32 and 64 bit kernels with x25 over tcp.
Signed-off-by: Shaun Pereira <pereira.shaun@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It should return an unsigned value, and fix sk_filter() as well.
Signed-off-by: Kris Katterjohn <kjak@ispwest.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This uses is_multicast_ether_addr() because it has recently been
changed to do the same thing these seperate tests are doing.
Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixed "make gconfig" with POSIXLY_CORRECT=1 set.
This issue was reported by Jens Elkner <elkner@linofee.org> in kernel
Bugzilla #2919.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Now when kbuild passes KBUILD_MODNAME with "" do not __stringify it when
used. Remove __stringnify for all users.
This also fixes the output of:
$ ls -l /sys/module/
drwxr-xr-x 4 root root 0 2006-01-05 14:24 pcmcia
drwxr-xr-x 4 root root 0 2006-01-05 14:24 pcmcia_core
drwxr-xr-x 3 root root 0 2006-01-05 14:24 "processor"
drwxr-xr-x 3 root root 0 2006-01-05 14:24 "psmouse"
The quoting of the module names will be gone again.
Thanks to GregKH + Kay Sievers for reproting this.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Print messages when an unsupported encrytion algorthm is requested or
there is an error locating a supported algorthm.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Print messages when an unsupported encrytion algorthm is requested or
there is an error locating a supported algorthm.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Also update the tokenlen calculations to accomodate g_token_size().
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If someone changes the uid/gid mapping in userland, then we do eventually
want those changes to be propagated to the kernel. Currently the kernel
assumes that it may cache entries forever.
Add an expiration time + garbage collector for idmap entries.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We ought never to be calling xprt_destroy() if there are still active
rpc_tasks. Optimise away the broken code that attempts to "fix" that case.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the server decides to close the RPC socket, we currently don't actually
respond until either another RPC call is scheduled, or until xprt_autoclose()
gets called by the socket expiry timer (which may be up to 5 minutes
later).
This patch ensures that xprt_autoclose() is called much sooner if the
server closes the socket.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
inode->i_mode contains a lot more than just the mode bits. Make sure that
we mask away this extra stuff in SETATTR calls to the server.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Every ULP that uses the in-kernel RPC client, except the NLM
client, sets cl_chatty. There's no reason why NLM shouldn't set it, so
just get rid of cl_chatty and always be verbose.
Test-plan:
Compile with CONFIG_NFS enabled.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
At some point, transport endpoint addresses will no longer be IPv4. To hide
the structure of the rpc_xprt's address field from ULPs and port mappers,
add an API for setting the port number during an RPC bind operation.
Test-plan:
Destructive testing (unplugging the network temporarily). Connectathon
with UDP and TCP. NFSv2/3 and NFSv4 mounting should be carefully checked.
Probably need to rig a server where certain services aren't running, or
that returns an error for some typical operation.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We'd like to hide fields in rpc_xprt and rpc_clnt from upper layer protocols.
Start by creating an API to force RPC rebind, replacing logic that simply
sets cl_port to zero.
Test-plan:
Destructive testing (unplugging the network temporarily). Connectathon
with UDP and TCP. NFSv2/3 and NFSv4 mounting should be carefully checked.
Probably need to rig a server where certain services aren't running, or
that returns an error for some typical operation.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add RPC client transport switch support for replacing buffer management
on a per-transport basis.
In the current IPv4 socket transport implementation, RPC buffers are
allocated as needed for each RPC message that is sent. Some transport
implementations may choose to use pre-allocated buffers for encoding,
sending, receiving, and unmarshalling RPC messages, however. For
transports capable of direct data placement, the buffers can be carved
out of a pre-registered area of memory rather than from a slab cache.
Test-plan:
Millions of fsx operations. Performance characterization with "sio" and
"iozone". Use oprofile and other tools to look for significant regression
in CPU utilization.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Thanks to Ed Keizer for bug and root cause. He says: "... we could only mount
the top-level Solaris share. We could not mount deeper into the tree.
Investigation showed that Solaris allows UNIX authenticated FSINFO only on the
top level of the share. This is a problem because we share/export our home
directories one level higher than we mount them. I.e. we share the partition
and not the individual home directories. This prevented access to home
directories."
We still may need to try auth_sys for the case where the client doesn't have
appropriate credentials.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The procedure that decodes statd sm_notify call seems to be skipping a
few arguments. How did this ever work?
>From folks at Polyserve.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the server receives an NLM cancel call and finds no waiting lock to
cancel, then chances are the lock has already been applied, and the client
just hadn't yet processed the NLM granted callback before it sent the
cancel.
The Open Group text, for example, perimts a server to return either success
(LCK_GRANTED) or failure (LCK_DENIED) in this case. But returning an error
seems more helpful; the client may be able to use it to recognize that a
race has occurred and to recover from the race.
So, modify the relevant functions to return an error in this case.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The fl_next check here is superfluous (and possibly a layering violation).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently when lockd gets an NLM_CANCEL request, it also does an unlock for
the same range. This is incorrect.
The Open Group documentation says that "This procedure cancels an
*outstanding* blocked lock request." (Emphasis mine.)
Also, consider a client that holds a lock on the first byte of a file, and
requests a lock on the entire file. If the client cancels that request
(perhaps because the requesting process is signalled), the server shouldn't
apply perform an unlock on the entire file, since that will also remove the
previous lock that the client was already granted.
Or consider a lock request that actually *downgraded* an exclusive lock to
a shared lock.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Slightly simpler logic here makes it more trivial to verify that the up's
and down's are balanced here. Break out an assignment from a conditional
while we're at it.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch removes ths unused function xdr_decode_string().
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Charles Lever <Charles.Lever@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Upon return of a write delegation, the server will almost always bump the
change attribute. Ensure that we pick up that change so that we don't
invalidate our data cache unnecessarily.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
According to RFC3530 we're supposed to cache the change attribute
at the time the client receives a write delegation.
If the inode is clean, a CB_GETATTR callback by the server to the
client is supposed to return the cached change attribute.
If, OTOH, the inode is dirty, the client should bump the cached
change attribute by 1.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The SuS states that a call to write() will cause mtime to be updated on
the file. In order to satisfy that requirement, we need to flush out
any cached writes in nfs_getattr().
Speed things up slightly by not committing the writes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
