Commit Graph

14 Commits

Author SHA1 Message Date
Gleb Natapov
4925663a07 KVM: Report IRQ injection status to userspace.
IRQ injection status is either -1 (if there was no CPU found
that should except the interrupt because IRQ was masked or
ioapic was misconfigured or ...) or >= 0 in that case the
number indicates to how many CPUs interrupt was injected.
If the value is 0 it means that the interrupt was coalesced
and probably should be reinjected.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:11 +02:00
Marcelo Tosatti
44882eed2e KVM: make irq ack notifications aware of routing table
IRQ ack notifications assume an identity mapping between pin->gsi,
which might not be the case with, for example, HPET.

Translate before acking.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
2009-03-24 11:03:08 +02:00
Avi Kivity
75858a84a6 KVM: Interrupt mask notifiers for ioapic
Allow clients to request notifications when the guest masks or unmasks a
particular irq line.  This complements irq ack notifications, as the guest
will not ack an irq line that is masked.

Currently implemented for the ioapic only.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:03 +02:00
Sheng Yang
68b76f5167 KVM: Export ioapic_get_delivery_bitmask
It would be used for MSI in device assignment, for MSI dispatch.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:01 +02:00
Jan Kiszka
26df99c6c5 KVM: Kick NMI receiving VCPU
Kick the NMI receiving VCPU in case the triggering caller runs in a
different context.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:51:42 +02:00
Xiantao Zhang
26815a648e KVM: ia64: add a dummy irq ack notification
Before enabling notify_acked_irq for ia64, leave the related APIs as
nop-op first.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:21 +02:00
Marcelo Tosatti
f52447261b KVM: irq ack notification
Based on a patch from: Ben-Ami Yassour <benami@il.ibm.com>
which was based on a patch from: Amit Shah <amit.shah@qumranet.com>

Notify IRQ acking on PIC/APIC emulation. The previous patch missed two things:

- Edge triggered interrupts on IOAPIC
- PIC reset with IRR/ISR set should be equivalent to ack (LAPIC probably
needs something similar).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: Amit Shah <amit.shah@qumranet.com>
CC: Ben-Ami Yassour <benami@il.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:16 +02:00
Laurent Vivier
92760499d0 KVM: kvm_io_device: extend in_range() to manage len and write attribute
Modify member in_range() of structure kvm_io_device to pass length and the type
of the I/O (write or read).

This modification allows to use kvm_io_device with coalesced MMIO.

Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:42:30 +03:00
Sheng Yang
3419ffc8e4 KVM: IOAPIC/LAPIC: Enable NMI support
[avi: fix ia64 build breakage]

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:42:25 +03:00
Mark McLoughlin
35baff256d KVM: IOAPIC: Fix level-triggered irq injection hang
The "remote_irr" variable is used to indicate an interrupt
which has been received by the LAPIC, but not acked.

In our EOI handler, we unset remote_irr and re-inject the
interrupt if the interrupt line is still asserted.

However, we do not set remote_irr here, leading to a
situation where if kvm_ioapic_set_irq() is called, then we go
ahead and call ioapic_service(). This means that IRR is
re-asserted even though the interrupt is currently in service
(i.e. LAPIC IRR is cleared and ISR/TMR set)

The issue with this is that when the currently executing
interrupt handler finishes and writes LAPIC EOI, then TMR is
unset and EOI sent to the IOAPIC. Since IRR is now asserted,
but TMR is not, then when the second interrupt is handled,
no EOI is sent and if there is any pending interrupt, it is
not re-injected.

This fixes a hang only seen while running mke2fs -j on an
8Gb virtio disk backed by a fully sparse raw file, with
aliguori "avoid fragmented virtio-blk transfers by copying"
changes.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-06 11:05:35 +03:00
Avi Kivity
4fa6b9c5dc KVM: ioapic: fix lost interrupt when changing a device's irq
The ioapic acknowledge path translates interrupt vectors to irqs.  It
currently uses a first match algorithm, stopping when it finds the first
redirection table entry containing the vector.  That fails however if the
guest changes the irq to a different line, leaving the old redirection table
entry in place (though masked).  Result is interrupts not making it to the
guest.

Fix by always scanning the entire redirection table.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-24 12:23:55 +03:00
Marcelo Tosatti
ff4b9df877 KVM: IOAPIC: only set remote_irr if interrupt was injected
There's a bug in the IOAPIC code for level-triggered interrupts. Its
relatively easy to trigger by sharing (virtio-blk + usbtablet was the
testcase, initially reported by Gerd von Egidy).

The "remote_irr" variable is used to indicate accepted but not yet acked
interrupts. Its cleared from the EOI handler.

Problem is that the EOI handler clears remote_irr unconditionally, even
if it reinjected another pending interrupt.

In that case, kvm_ioapic_set_irq() proceeds to ioapic_service() which
sets remote_irr even if it failed to inject (since the IRR was high due
to EOI reinjection).

Since the TMR bit has been cleared by the first EOI, the second one
fails to clear remote_irr.

End result is interrupt line dead.

Fix it by setting remote_irr only if a new pending interrupt has been
generated (and the TMR bit for vector in question set).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-06 21:32:39 +03:00
Avi Kivity
8c35f237fb KVM: Route irq 0 to vcpu 0 exclusively
Some Linux versions allow the timer interrupt to be processed by more than
one cpu, leading to hangs due to tsc instability.  Work around the issue
by only disaptching the interrupt to vcpu 0.

Problem analyzed (and patch tested) by Sheng Yang.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-04 15:19:48 +02:00
Zhang Xiantao
0eb8f49848 KVM: Move ioapic code to common directory.
Move ioapic code to common, since IA64 also needs it.

Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:19 +02:00