Commit Graph

14087 Commits

Author SHA1 Message Date
Linus Torvalds
4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Linus Torvalds
a252e749f1 sctp: fix compile error due to sysctl mismerge
I messed up the merge in d7fc02c7ba, where
the conflict in question wasn't just about CTL_UNNUMBERED being removed,
but the 'strategy' field is too (sysctl handling is now done through the
/proc interface, with no duplicate protocols for reading the data).

Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-08 12:51:22 -08:00
Linus Torvalds
d7fc02c7ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits)
  mac80211: fix reorder buffer release
  iwmc3200wifi: Enable wimax core through module parameter
  iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter
  iwmc3200wifi: Coex table command does not expect a response
  iwmc3200wifi: Update wiwi priority table
  iwlwifi: driver version track kernel version
  iwlwifi: indicate uCode type when fail dump error/event log
  iwl3945: remove duplicated event logging code
  b43: fix two warnings
  ipw2100: fix rebooting hang with driver loaded
  cfg80211: indent regulatory messages with spaces
  iwmc3200wifi: fix NULL pointer dereference in pmkid update
  mac80211: Fix TX status reporting for injected data frames
  ath9k: enable 2GHz band only if the device supports it
  airo: Fix integer overflow warning
  rt2x00: Fix padding bug on L2PAD devices.
  WE: Fix set events not propagated
  b43legacy: avoid PPC fault during resume
  b43: avoid PPC fault during resume
  tcp: fix a timewait refcnt race
  ...

Fix up conflicts due to sysctl cleanups (dead sysctl_check code and
CTL_UNNUMBERED removed) in
	kernel/sysctl_check.c
	net/ipv4/sysctl_net_ipv4.c
	net/ipv6/addrconf.c
	net/sctp/sysctl.c
2009-12-08 07:55:01 -08:00
Linus Torvalds
1557d33007 Merge git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl-2.6: (43 commits)
  security/tomoyo: Remove now unnecessary handling of security_sysctl.
  security/tomoyo: Add a special case to handle accesses through the internal proc mount.
  sysctl: Drop & in front of every proc_handler.
  sysctl: Remove CTL_NONE and CTL_UNNUMBERED
  sysctl: kill dead ctl_handler definitions.
  sysctl: Remove the last of the generic binary sysctl support
  sysctl net: Remove unused binary sysctl code
  sysctl security/tomoyo: Don't look at ctl_name
  sysctl arm: Remove binary sysctl support
  sysctl x86: Remove dead binary sysctl support
  sysctl sh: Remove dead binary sysctl support
  sysctl powerpc: Remove dead binary sysctl support
  sysctl ia64: Remove dead binary sysctl support
  sysctl s390: Remove dead sysctl binary support
  sysctl frv: Remove dead binary sysctl support
  sysctl mips/lasat: Remove dead binary sysctl support
  sysctl drivers: Remove dead binary sysctl support
  sysctl crypto: Remove dead binary sysctl support
  sysctl security/keys: Remove dead binary sysctl support
  sysctl kernel: Remove binary sysctl logic
  ...
2009-12-08 07:38:50 -08:00
Jiri Kosina
d014d04386 Merge branch 'for-next' into for-linus
Conflicts:

	kernel/irq/chip.c
2009-12-07 18:36:35 +01:00
David S. Miller
28b4d5cc17 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/net/pcmcia/fmvj18x_cs.c
	drivers/net/pcmcia/nmclan_cs.c
	drivers/net/pcmcia/xirc2ps_cs.c
	drivers/net/wireless/ray_cs.c
2009-12-05 15:22:26 -08:00
Linus Torvalds
d0b093a8b5 Merge branch 'core-printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ratelimit: Make suppressed output messages more useful
  printk: Remove ratelimit.h from kernel.h
  ratelimit: Fix/allow use in atomic contexts
  ratelimit: Use per ratelimit context locking
2009-12-05 09:50:22 -08:00
Johannes Berg
d29cecda03 mac80211: fix reorder buffer release
My patch "mac80211: correctly place aMPDU RX reorder code"
uses an skb queue for MPDUs that were released from the
buffer. I intentially didn't initialise and use the skb
queue's spinlock, but in this place forgot that the code
variant that doesn't touch the spinlock is needed.

Thanks to Christian Lamparter for quickly spotting the
bug in the backtrace Reinette reported.

Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Bug-identified-by: Christian Lamparter <chunkeey@googlemail.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-04 14:25:43 -08:00
David S. Miller
8f56874bd7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2009-12-04 13:25:15 -08:00
Kalle Valo
269ac5fd2d cfg80211: indent regulatory messages with spaces
The regulatory messages in syslog look weird:

kernel: cfg80211: Regulatory domain: US
kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
kernel: ^I(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
kernel: ^I(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
kernel: ^I(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
kernel: ^I(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)

Indent them with four spaces instead of the tab character to get prettier
output.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Acked: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04 14:16:24 -05:00
Jouni Malinen
914828fad0 mac80211: Fix TX status reporting for injected data frames
An earlier optimization on removing unnecessary traffic on cooked
monitor interfaces ("mac80211: reduce the amount of unnecessary traffic
on cooked monitor interfaces ") ended up removing quite a bit more
than just unnecessary traffic. It was not supposed to remove TX status
reporting for injected frames, but ended up doing it by checking the
injected flag in skb->cb only after that field had been cleared with
memset.. Fix this by taking a local copy of the injected flag before
skb->cb is cleared.

This broke user space applications that depend on getting TX status
notifications for injected data frames. For example, STA inactivity
poll from hostapd did not work and ended up kicking out stations even
if they were still present.

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04 14:16:23 -05:00
Jean Tourrilhes
1014eb6ec9 WE: Fix set events not propagated
I've just noticed that some events are no longer propagated
for some wireless drivers. Basically, SET request with a extra payload
for driver without commit handler. The fix is pretty simple, see
attached.
	Actually, a few lines below this line, you will see that the
event generation for simple SET (iwpoint-less ?) is done properly,
and this other event generation does not need fixing.

Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04 13:30:39 -05:00
André Goddard Rosa
af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Thadeu Lima de Souza Cascardo
94e2bd6888 tree-wide: fix some typos and punctuation in comments
fix some typos and punctuation in comments

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:48 +01:00
Eric Dumazet
47e1c32306 tcp: fix a timewait refcnt race
After TCP RCU conversion, tw->tw_refcnt should not be set to 1 in
inet_twsk_alloc(). It allows a RCU reader to get this timewait socket,
while we not yet stabilized it.

Only choice we have is to set tw_refcnt to 0 in inet_twsk_alloc(),
then atomic_add() it later, once everything is done.

Location of this atomic_add() is tricky, because we dont want another
writer to find this timewait in ehash, while tw_refcnt is still zero !

Thanks to Kapil Dakhane tests and reports.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 16:17:44 -08:00
Eric Dumazet
13475a30b6 tcp: connect() race with timewait reuse
Its currently possible that several threads issuing a connect() find
the same timewait socket and try to reuse it, leading to list
corruptions.

Condition for bug is that these threads bound their socket on same
address/port of to-be-find timewait socket, and connected to same
target. (SO_REUSEADDR needed)

To fix this problem, we could unhash timewait socket while holding
ehash lock, to make sure lookups/changes will be serialized. Only
first thread finds the timewait socket, other ones find the
established socket and return an EADDRNOTAVAIL error.

This second version takes into account Evgeniy's review and makes sure
inet_twsk_put() is called outside of locked sections.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 16:17:43 -08:00
Eric Dumazet
49d0900787 tcp: diag: Dont report negative values for rx queue
Both netlink and /proc/net/tcp interfaces can report transient
negative values for rx queue.

ss ->
State   Recv-Q Send-Q  Local Address:Port  Peer Address:Port
ESTAB   -6     6       127.0.0.1:45956     127.0.0.1:3333 

netstat ->
tcp   4294967290      6 127.0.0.1:37784  127.0.0.1:3333 ESTABLISHED

This is because we dont lock socket while computing 
tp->rcv_nxt - tp->copied_seq,
and another CPU can update copied_seq before rcv_next in RX path.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 16:06:13 -08:00
Patrick Mullaney
fc4a748966 netdevice: provide common routine for macvlan and vlan operstate management
Provide common routine for the transition of operational state for a leaf
device during a root device transition.

Signed-off-by: Patrick Mullaney <pmullaney@novell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 15:59:22 -08:00
David S. Miller
a7fca0ccec Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6 2009-12-03 13:51:02 -08:00
David S. Miller
424eff9751 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6 2009-12-03 13:23:12 -08:00
Eric W. Biederman
b099ce2602 net: Batch inet_twsk_purge
This function walks the whole hashtable so there is no point in
passing it a network namespace.  Instead I purge all timewait
sockets from dead network namespaces that I find.  If the namespace
is one of the once I am trying to purge I am guaranteed no new timewait
sockets can be formed so this will get them all.  If the namespace
is one I am not acting for it might form a few more but I will
call inet_twsk_purge again and  shortly to get rid of them.  In
any even if the network namespace is dead timewait sockets are
useless.

Move the calls of inet_twsk_purge into batch_exit routines so
that if I am killing a bunch of namespaces at once I will just
call inet_twsk_purge once and save a lot of redundant unnecessary
work.

My simple 4k network namespace exit test the cleanup time dropped from
roughly 8.2s to 1.6s.  While the time spent running inet_twsk_purge fell
to about 2ms.  1ms for ipv4 and 1ms for ipv6.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:23:47 -08:00
Eric W. Biederman
575f4cd5a5 net: Use rcu lookups in inet_twsk_purge.
While we are looking up entries to free there is no reason to take
the lock in inet_twsk_purge.  We have to drop locks and restart
occassionally anyway so adding a few more in case we get on the
wrong list because of a timewait move is no big deal.  At the
same time not taking the lock for long periods of time is much
more polite to the rest of the users of the hash table.

In my test configuration of killing 4k network namespaces
this change causes 4k back to back runs of inet_twsk_purge on an
empty hash table to go from roughly 20.7s to 3.3s, and the total
time to destroy 4k network namespaces goes from roughly 44s to
3.3s.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:23:47 -08:00
Eric W. Biederman
e9c5158ac2 net: Allow fib_rule_unregister to batch
Refactor the code so fib_rules_register always takes a template instead
of the actual fib_rules_ops structure that will be used.  This is
required for network namespace support so 2 out of the 3 callers already
do this, it allows the error handling to be made common, and it allows
fib_rules_unregister to free the template for hte caller.

Modify fib_rules_unregister to use call_rcu instead of syncrhonize_rcu
to allw multiple namespaces to be cleaned up in the same rcu grace
period.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:22:55 -08:00
Eric W. Biederman
3a765edadb netns: Add an explicit rcu_barrier to unregister_pernet_{device|subsys}
This allows namespace exit methods to batch work that comes requires an
rcu barrier using call_rcu without having to treat the
unregister_pernet_operations cases specially.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:22:03 -08:00
Eric W. Biederman
d79d792ef9 net: Allow xfrm_user_net_exit to batch efficiently.
xfrm.nlsk is provided by the xfrm_user module and is access via rcu from
other parts of the xfrm code.  Add xfrm.nlsk_stash a copy of xfrm.nlsk that
will never be set to NULL.  This allows the synchronize_net and
netlink_kernel_release to be deferred until a whole batch of xfrm.nlsk sockets
have been set to NULL.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:22:03 -08:00
Eric W. Biederman
04dc7f6be3 net: Move network device exit batching
Move network device exit batching from a special case in
net_namespace.c to using common mechanisms in dev.c

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:22:02 -08:00
Eric W. Biederman
72ad937abd net: Add support for batching network namespace cleanups
- Add exit_list to struct net to support building lists of network
  namespaces to cleanup.

- Add exit_batch to pernet_operations to allow running operations only
  once during a network namespace exit.  Instead of once per network
  namespace.

- Factor opt ops_exit_list and ops_exit_free so the logic with cleanup
  up a network namespace does not need to be duplicated.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:22:01 -08:00
Patrick McHardy
8153a10c08 ipv4 05/05: add sysctl to accept packets with local source addresses
commit 8ec1e0ebe26087bfc5c0394ada5feb5758014fc8
Author: Patrick McHardy <kaber@trash.net>
Date:   Thu Dec 3 12:16:35 2009 +0100

    ipv4: add sysctl to accept packets with local source addresses

    Change fib_validate_source() to accept packets with a local source address when
    the "accept_local" sysctl is set for the incoming inet device. Combined with the
    previous patches, this allows to communicate between multiple local interfaces
    over the wire.

    Signed-off-by: Patrick McHardy <kaber@trash.net>

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:14:38 -08:00
Patrick McHardy
5adef18091 net 04/05: fib_rules: allow to delete local rule
commit d124356ce314fff22a047ea334379d5105b2d834
Author: Patrick McHardy <kaber@trash.net>
Date:   Thu Dec 3 12:16:35 2009 +0100

    net: fib_rules: allow to delete local rule

    Allow to delete the local rule and recreate it with a higher priority. This
    can be used to force packets with a local destination out on the wire instead
    of routing them to loopback. Additionally this patch allows to recreate rules
    with a priority of 0.

    Combined with the previous patch to allow oif classification, a socket can
    be bound to the desired interface and packets routed to the wire like this:

    # move local rule to lower priority
    ip rule add pref 1000 lookup local
    ip rule del pref 0

    # route packets of sockets bound to eth0 to the wire independant
    # of the destination address
    ip rule add pref 100 oif eth0 lookup 100
    ip route add default dev eth0 table 100

    Signed-off-by: Patrick McHardy <kaber@trash.net>

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:14:37 -08:00
Patrick McHardy
1b038a5e60 net 03/05: fib_rules: add oif classification
commit 68144d350f4f6c348659c825cde6a82b34c27a91
Author: Patrick McHardy <kaber@trash.net>
Date:   Thu Dec 3 12:05:25 2009 +0100

    net: fib_rules: add oif classification

    Support routing table lookup based on the flow's oif. This is useful to
    classify packets originating from sockets bound to interfaces differently.

    The route cache already includes the oif and needs no changes.

    Signed-off-by: Patrick McHardy <kaber@trash.net>

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:14:36 -08:00
Patrick McHardy
491deb24bf net 02/05: fib_rules: rename ifindex/ifname/FRA_IFNAME to iifindex/iifname/FRA_IIFNAME
commit 229e77eec406ad68662f18e49fda8b5d366768c5
Author: Patrick McHardy <kaber@trash.net>
Date:   Thu Dec 3 12:05:23 2009 +0100

    net: fib_rules: rename ifindex/ifname/FRA_IFNAME to iifindex/iifname/FRA_IIFNAME

    The next patch will add oif classification, rename interface related members
    and attributes to reflect that they're used for iif classification.

    Signed-off-by: Patrick McHardy <kaber@trash.net>

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:14:36 -08:00
Marcel Holtmann
eae38eede2 Bluetooth: Add RFCOMM option to use L2CAP ERTM mode
By default the RFCOMM layer would still use L2CAP basic mode. For testing
purposes this option enables RFCOMM to select enhanced retransmission
mode.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03 19:34:26 +01:00
Marcel Holtmann
5fbcd3d1a0 Bluetooth: Add L2CAP option for max transmit value
For testing purposes it is important to modify the max transmit value.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03 19:34:25 +01:00
Gustavo F. Padovan
2ab25cdd7b Bluetooth: Fix 'SendRRorRNR' to send the ReqSeq value
SendRRorRNR needs to acknowledge received I-frames (actually every packet
needs to acknowledge received I-frames by sending the proper packet
sequence number), so ReqSeq is set to the next I-frame number sequence to
be pulled by the reassembly function.
SendRRorRNR tells the remote side about local busy conditions, it sends
a Receiver Ready frame if local busy is false or a Receiver Not Ready
if local busy is true.
ReqSeq is the packet's field to send the number of the acknowledged
packets.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03 19:34:24 +01:00
Gustavo F. Padovan
4ec10d9720 Bluetooth: Implement RejActioned flag
RejActioned is used to prevent retransmission when a entity is on the
WAIT_F state, i.e., waiting for a frame with F-bit set due local busy
condition or a expired retransmission timer. (When these two events raise
they send a frame with the Poll bit set and enters in the WAIT_F state to
wait for a frame with the Final bit set.)
The local entity doesn't send I-frames(the data frames) until the receipt
of a frame with F-bit set. When that happens it also set RejActioned to false.
RejActioned is a mandatory feature of ERTM spec.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03 19:34:24 +01:00
Gustavo F. Padovan
9f121a5a80 Bluetooth: Fix sending ReqSeq on I-frames
As specified by ERTM spec an ERTM channel can acknowledge received
I-frames(the data frames) by sending an I-frame with the proper ReqSeq
value (i.e. ReqSeq is set to BufferSeq).  Until now we aren't setting the
ReqSeq value on I-frame control bits. That way we can save sending
S-frames(Supervise frames) only to acknowledge receipt of I-frames. It
is very helpful to the full-duplex channel.
ReqSeq is the packet sequence number sent in an acknowledgement frame to
acknowledge receipt of frames up to (ReqSeq - 1).
BufferSeq controls the receiver buffer, it is used to delay
acknowledgement of new frames to not cause buffer overflow. BufferSeq
value is not increased until frames are pulled by reassembly function.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03 19:34:23 +01:00
Gustavo F. Padovan
889a3ca466 Bluetooth: Fix unset of SrejActioned flag
SrejActioned  is a flag that when set prevents local side to retransmit a
I-frame(the data frame) already retransmitted. The local entity can
retransmit again only when it receives a SREJ frame with the F-bit set.
SREJ frame - Selective Reject frame  - is sent when an entity wants the
retransmission of a specific I-frame that was lost or corrupted.
This bug can put ERTM in an unknown state once the entity can't
retransmit.
A frame with the Final bit set is expected when the local side sends a
frame with the Poll bit set due to a local busy condition or a
retransmission timer expired. (Receipt of P-bit shall always be replied by
a frame with the F-bit set).
pi->conn_state keeps informations about many ERTM flags including
SrejActioned.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03 19:34:23 +01:00
Gustavo F. Padovan
0565c1c24a Bluetooth: Initialize variables and timers for both channel's sides
Fix ERTM's full-duplex channel to work as specified by ERTM spec. ERTM
needs to handle state vars, timers and counters to send and receive
I-frames(the data frames), i.e., for both sides of data communication.
We initialize all of them to the default values here.
Full-duplex channel is a mandatory feature of ERTM spec.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03 19:34:22 +01:00
Vikram Kandukuri
cde9f807f0 Bluetooth: Fix handling of BNEP setup connection requests
According to BNEP test specification the proper response should be sent
for a setup connection request message after the BNEP connection setup
has been completed.

Signed-off-by: Vikram Kandukuri <vikram.kandukuri@atheros.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03 19:34:21 +01:00
Marcel Holtmann
c78ae28314 Bluetooth: Unobfuscate tasklet_schedule usage
The tasklet schedule function helpers are just an obfuscation. So remove
them and call the schedule functions directly.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03 19:34:21 +01:00
Marcel Holtmann
76bca88012 Bluetooth: Turn hci_recv_frame into an exported function
For future simplification it is important that the hci_recv_frame
function is no longer an inline function. So move it into the module
itself and export it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03 19:34:20 +01:00
Marcel Holtmann
7e21addcd0 Bluetooth: Return ENETDOWN when interface is down
Sending commands to a down interface results in a timeout while clearly
it should just return ENETDOWN. When using the ioctls this works fine,
but not when using the HCI sockets sendmsg interface.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03 19:34:20 +01:00
Jiri Kosina
2da31939a4 Bluetooth: Implement raw output support for HIDP layer
Implement raw output callback which is used by hidraw to send raw data to
the underlying device.

Without this patch, the userspace hidraw-based applications can't send
output reports to HID Bluetooth devices.

Reported-and-tested-by: Brian Gunn <bgunn@solekai.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03 19:34:19 +01:00
David S. Miller
e6b09ccada tcp: sysctl_tcp_cookie_size needs to be exported to modules.
Otherwise:

ERROR: "sysctl_tcp_cookie_size" [net/ipv6/ipv6.ko] undefined!
make[1]: *** [__modpost] Error 1

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 22:18:58 -08:00
David S. Miller
f9a2e69e8b tcp: Fix warning on 64-bit.
net/ipv4/tcp_output.c: In function ‘tcp_make_synack’:
net/ipv4/tcp_output.c:2488: warning: cast from pointer to integer of different size

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 22:12:04 -08:00
Eric W. Biederman
91e2ff3528 net: Teach vlans to cleanup as a pernet subsystem
Take advantage of the fact that an explicit rtnl_kill_links is
unnecessary (and skipping it improves batching), as network namespace
exit calls dellink on all remaining virtual devices, and
rtnl_link_unregister calls dellink on all outstanding devices in that
network namespace.  To do this we need to leave the vlan proc
directories in place until after network device exit time, which is
done by using register_pernet_subsys instead of
register_pernet_device.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 22:10:24 -08:00
William Allen Simpson
4957faade1 TCPCT part 1g: Responder Cookie => Initiator
Parse incoming TCP_COOKIE option(s).

Calculate <SYN,ACK> TCP_COOKIE option.

Send optional <SYN,ACK> data.

This is a significantly revised implementation of an earlier (year-old)
patch that no longer applies cleanly, with permission of the original
author (Adam Langley):

    http://thread.gmane.org/gmane.linux.network/102586

Requires:
   TCPCT part 1a: add request_values parameter for sending SYNACK
   TCPCT part 1b: generate Responder Cookie secret
   TCPCT part 1c: sysctl_tcp_cookie_size, socket option TCP_COOKIE_TRANSACTIONS
   TCPCT part 1d: define TCP cookie option, extend existing struct's
   TCPCT part 1e: implement socket option TCP_COOKIE_TRANSACTIONS
   TCPCT part 1f: Initiator Cookie => Responder

Signed-off-by: William.Allen.Simpson@gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 22:07:26 -08:00
William Allen Simpson
bd0388ae77 TCPCT part 1f: Initiator Cookie => Responder
Calculate and format <SYN> TCP_COOKIE option.

This is a significantly revised implementation of an earlier (year-old)
patch that no longer applies cleanly, with permission of the original
author (Adam Langley):

    http://thread.gmane.org/gmane.linux.network/102586

Requires:
   TCPCT part 1c: sysctl_tcp_cookie_size, socket option TCP_COOKIE_TRANSACTIONS
   TCPCT part 1d: define TCP cookie option, extend existing struct's

Signed-off-by: William.Allen.Simpson@gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 22:07:26 -08:00
William Allen Simpson
e56fb50f2b TCPCT part 1e: implement socket option TCP_COOKIE_TRANSACTIONS
Provide per socket control of the TCP cookie option and SYN/SYNACK data.

This is a straightforward re-implementation of an earlier (year-old)
patch that no longer applies cleanly, with permission of the original
author (Adam Langley):

    http://thread.gmane.org/gmane.linux.network/102586

The principle difference is using a TCP option to carry the cookie nonce,
instead of a user configured offset in the data.

Allocations have been rearranged to avoid requiring GFP_ATOMIC.

Requires:
   net: TCP_MSS_DEFAULT, TCP_MSS_DESIRED
   TCPCT part 1c: sysctl_tcp_cookie_size, socket option TCP_COOKIE_TRANSACTIONS
   TCPCT part 1d: define TCP cookie option, extend existing struct's

Signed-off-by: William.Allen.Simpson@gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 22:07:25 -08:00
William Allen Simpson
435cf559f0 TCPCT part 1d: define TCP cookie option, extend existing struct's
Data structures are carefully composed to require minimal additions.
For example, the struct tcp_options_received cookie_plus variable fits
between existing 16-bit and 8-bit variables, requiring no additional
space (taking alignment into consideration).  There are no additions to
tcp_request_sock, and only 1 pointer in tcp_sock.

This is a significantly revised implementation of an earlier (year-old)
patch that no longer applies cleanly, with permission of the original
author (Adam Langley):

    http://thread.gmane.org/gmane.linux.network/102586

The principle difference is using a TCP option to carry the cookie nonce,
instead of a user configured offset in the data.  This is more flexible and
less subject to user configuration error.  Such a cookie option has been
suggested for many years, and is also useful without SYN data, allowing
several related concepts to use the same extension option.

    "Re: SYN floods (was: does history repeat itself?)", September 9, 1996.
    http://www.merit.net/mail.archives/nanog/1996-09/msg00235.html

    "Re: what a new TCP header might look like", May 12, 1998.
    ftp://ftp.isi.edu/end2end/end2end-interest-1998.mail

These functions will also be used in subsequent patches that implement
additional features.

Requires:
   TCPCT part 1a: add request_values parameter for sending SYNACK
   TCPCT part 1b: generate Responder Cookie secret
   TCPCT part 1c: sysctl_tcp_cookie_size, socket option TCP_COOKIE_TRANSACTIONS

Signed-off-by: William.Allen.Simpson@gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 22:07:25 -08:00