Commit Graph

2567 Commits

Author SHA1 Message Date
Ingo Molnar
a0dc72601d sched: fix niced_granularity() shift
fix niced_granularity(). This resulted in under-scheduling for
CPU-bound negative nice level tasks (and this in turn caused
higher than necessary latencies in nice-0 tasks).

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05 14:32:49 +02:00
Suresh Siddha
7fd0d2dde9 sched: fix MC/HT scheduler optimization, without breaking the FUZZ logic.
First fix the check
	if (*imbalance + SCHED_LOAD_SCALE_FUZZ < busiest_load_per_task)
with this
	if (*imbalance < busiest_load_per_task)

As the current check is always false for nice 0 tasks (as
SCHED_LOAD_SCALE_FUZZ is same as busiest_load_per_task for nice 0
tasks).

With the above change, imbalance was getting reset to 0 in the corner
case condition, making the FUZZ logic fail. Fix it by not corrupting the
imbalance and change the imbalance, only when it finds that the HT/MC
optimization is needed.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05 14:32:48 +02:00
Linus Torvalds
5e7a39275b Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: clean up task_new_fair()
  sched: small schedstat fix
  sched: fix wait_start_fair condition in update_stats_wait_end()
  sched: call update_curr() in task_tick_fair()
  sched: make the scheduler converge to the ideal latency
  sched: fix sleeper bonus limit
2007-08-31 10:52:00 -07:00
Oleg Nesterov
60187d2708 sigqueue_free: fix the race with collect_signal()
Spotted by taoyue <yue.tao@windriver.com> and Jeremy Katz <jeremy.katz@windriver.com>.

collect_signal:				sigqueue_free:

	list_del_init(&first->list);
						if (!list_empty(&q->list)) {
							// not taken
						}
						q->flags &= ~SIGQUEUE_PREALLOC;

	__sigqueue_free(first);			__sigqueue_free(q);

Now, __sigqueue_free() is called twice on the same "struct sigqueue" with the
obviously bad implications.

In particular, this double free breaks the array_cache->avail logic, so the
same sigqueue could be "allocated" twice, and the bug can manifest itself via
the "impossible" BUG_ON(!SIGQUEUE_PREALLOC) in sigqueue_free/send_sigqueue.

Hopefully this can explain these mysterious bug-reports, see

	http://marc.info/?t=118766926500003
	http://marc.info/?t=118466273000005

Alexey Dobriyan reports this patch makes the difference for the testcase, but
nobody has an access to the application which opened the problems originally.

Also, this patch removes tasklist lock/unlock, ->siglock is enough.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: taoyue <yue.tao@windriver.com>
Cc: Jeremy Katz <jeremy.katz@windriver.com>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Roland McGrath <roland@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 01:42:23 -07:00
Alexey Dobriyan
99db67bc04 userns: don't leak root user
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Acked-by: Cedric Le Goater <clg@fr.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 01:42:23 -07:00
Jarek Poplawski
59845b1ffd request_irq: fix DEBUG_SHIRQ handling
Mariusz Kozlowski reported lockdep's warning:

> =================================
> [ INFO: inconsistent lock state ]
> 2.6.23-rc2-mm1 #7
> ---------------------------------
> inconsistent {in-hardirq-W} -> {hardirq-on-W} usage.
> ifconfig/5492 [HC0[0]:SC0[0]:HE1:SE1] takes:
>  (&tp->lock){+...}, at: [<de8706e0>] rtl8139_interrupt+0x27/0x46b [8139too]
> {in-hardirq-W} state was registered at:
>   [<c0138eeb>] __lock_acquire+0x949/0x11ac
>   [<c01397e7>] lock_acquire+0x99/0xb2
>   [<c0452ff3>] _spin_lock+0x35/0x42
>   [<de8706e0>] rtl8139_interrupt+0x27/0x46b [8139too]
>   [<c0147a5d>] handle_IRQ_event+0x28/0x59
>   [<c01493ca>] handle_level_irq+0xad/0x10b
>   [<c0105a13>] do_IRQ+0x93/0xd0
>   [<c010441e>] common_interrupt+0x2e/0x34
...
> other info that might help us debug this:
> 1 lock held by ifconfig/5492:
>  #0:  (rtnl_mutex){--..}, at: [<c0451778>] mutex_lock+0x1c/0x1f
>
> stack backtrace:
...
>  [<c0452ff3>] _spin_lock+0x35/0x42
>  [<de8706e0>] rtl8139_interrupt+0x27/0x46b [8139too]
>  [<c01480fd>] free_irq+0x11b/0x146
>  [<de871d59>] rtl8139_close+0x8a/0x14a [8139too]
>  [<c03bde63>] dev_close+0x57/0x74
...

This shows that a driver's irq handler was running both in hard interrupt
and process contexts with irqs enabled. The latter was done during
free_irq() call and was possible only with CONFIG_DEBUG_SHIRQ enabled.
This was fixed by another patch.

But similar problem is possible with request_irq(): any locks taken from
irq handler could be vulnerable - especially with soft interrupts. This
patch fixes it by disabling local interrupts during handler's run. (It
seems, disabling softirqs should be enough, but it needs more checking
on possible races or other special cases).

Reported-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 01:42:23 -07:00
Rafael J. Wysocki
f3de4be9d5 PM: Fix dependencies of CONFIG_SUSPEND and CONFIG_HIBERNATION
Dependencies of CONFIG_SUSPEND and CONFIG_HIBERNATION introduced by commit
296699de6b "Introduce CONFIG_SUSPEND for
suspend-to-Ram and standby" are incorrect, as they don't cover the facts that
(1) not all architectures support suspend and (2) SMP hibernation is only
possible on X86 and PPC64 (if CONFIG_PPC64_SWSUSP is set).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 01:42:22 -07:00
Oleg Nesterov
b07e35f94a setpgid(child) fails if the child was forked by sub-thread
Spotted by Marcin Kowalczyk <qrczak@knm.org.pl>.

sys_setpgid(child) fails if the child was forked by sub-thread.

Fix the "is it our child" check. The previous commit
ee0acf90d3 was not complete.

(this patch asks for the new same_thread_group() helper, but mainline doesn't
 have it yet).

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: <stable@kernel.org>
Tested-by: "Marcin 'Qrczak' Kowalczyk" <qrczak@knm.org.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 01:42:22 -07:00
Jonathan Lim
f2ab6d8889 Assign task_struct.exit_code before taskstats_exit()
taskstats.ac_exitcode is assigned to task_struct.exit_code in bacct_add_tsk()
through the following kernel function calls:

  do_exit()
    taskstats_exit()
      fill_pid()
        bacct_add_tsk()

The problem is that in do_exit(), task_struct.exit_code is set to 'code' only
after taskstats_exit() has been called.  So we need to move the assignment
before taskstats_exit().

Signed-off-by: Jonathan Lim <jlim@sgi.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 01:42:22 -07:00
Ingo Molnar
9f508f8258 sched: clean up task_new_fair()
cleanup: we have the 'se' and 'curr' entity-pointers already,
no need to use p->se and current->se.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
2007-08-28 12:53:24 +02:00
Ingo Molnar
213c8af67f sched: small schedstat fix
small schedstat fix: the cfs_rq->wait_runtime 'sum of all runtimes'
statistics counters missed newly forked tasks and thus had a constant
negative skew. Fix this.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
2007-08-28 12:53:24 +02:00
Ingo Molnar
b77d69db9f sched: fix wait_start_fair condition in update_stats_wait_end()
Peter Zijlstra noticed the following bug in SCHED_FEAT_SKIP_INITIAL (which
is disabled by default at the moment): it relies on se.wait_start_fair
being 0 while update_stats_wait_end() did not recognize a 0 value,
so instead of 'skipping' the initial interval we gave the new child
a maximum boost of +runtime-limit ...

(No impact on the default kernel, but nice to fix for completeness.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
2007-08-28 12:53:24 +02:00
Ting Yang
7109c4429a sched: call update_curr() in task_tick_fair()
update the fair-clock before using it for the key value.

[ mingo@elte.hu: small cleanups. ]

Signed-off-by: Ting Yang <tingy@cs.umass.edu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2007-08-28 12:53:24 +02:00
Ingo Molnar
f6cf891c4d sched: make the scheduler converge to the ideal latency
de-HZ-ification of the granularity defaults unearthed a pre-existing
property of CFS: while it correctly converges to the granularity goal,
it does not prevent run-time fluctuations in the range of
[-gran ... 0 ... +gran].

With the increase of the granularity due to the removal of HZ
dependencies, this becomes visible in chew-max output (with 5 tasks
running):

 out:  28 . 27. 32 | flu:  0 .  0 | ran:    9 .   13 | per:   37 .   40
 out:  27 . 27. 32 | flu:  0 .  0 | ran:   17 .   13 | per:   44 .   40
 out:  27 . 27. 32 | flu:  0 .  0 | ran:    9 .   13 | per:   36 .   40
 out:  29 . 27. 32 | flu:  2 .  0 | ran:   17 .   13 | per:   46 .   40
 out:  28 . 27. 32 | flu:  0 .  0 | ran:    9 .   13 | per:   37 .   40
 out:  29 . 27. 32 | flu:  0 .  0 | ran:   18 .   13 | per:   47 .   40
 out:  28 . 27. 32 | flu:  0 .  0 | ran:    9 .   13 | per:   37 .   40

average slice is the ideal 13 msecs and the period is picture-perfect 40
msecs. But the 'ran' field fluctuates around 13.33 msecs and there's no
mechanism in CFS to keep that from happening: it's a perfectly valid
solution that CFS finds.

to fix this we add a granularity/preemption rule that knows about
the "target latency", which makes tasks that run longer than the ideal
latency run a bit less. The simplest approach is to simply decrease the
preemption granularity when a task overruns its ideal latency. For this
we have to track how much the task executed since its last preemption.

( this adds a new field to task_struct, but we can eliminate that
  overhead in 2.6.24 by putting all the scheduler timestamps into an
  anonymous union. )

with this change in place, chew-max output is fluctuation-less all
around:

 out:  28 . 27. 39 | flu:  0 .  2 | ran:   13 .   13 | per:   41 .   40
 out:  28 . 27. 39 | flu:  0 .  2 | ran:   13 .   13 | per:   41 .   40
 out:  28 . 27. 39 | flu:  0 .  2 | ran:   13 .   13 | per:   41 .   40
 out:  28 . 27. 39 | flu:  0 .  2 | ran:   13 .   13 | per:   41 .   40
 out:  28 . 27. 39 | flu:  0 .  1 | ran:   13 .   13 | per:   41 .   40
 out:  28 . 27. 39 | flu:  0 .  1 | ran:   13 .   13 | per:   41 .   40

this patch has no impact on any fastpath or on any globally observable
scheduling property. (unless you have sharp enough eyes to see
millisecond-level ruckles in glxgears smoothness :-)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
2007-08-28 12:53:24 +02:00
Mike Galbraith
5f01d519e6 sched: fix sleeper bonus limit
There is an Amarok song switch time increase (regression) under
hefty load.

What is happening is that sleeper_bonus is never consumed, and only
rarely goes below runtime_limit, so for the most part, Amarok isn't
getting any bonus at all.  We're keeping sleeper_bonus right at
runtime_limit (sched_latency == sched_runtime_limit == 40ms) forever, ie
we don't consume if we're lower that that, and don't add if we're above
it.  One Amarok thread waking (or anybody else) will push us past the
threshold, so the next thread waking gets nada, but will reap pain from
the previous thread waking until we drop back to runtime_limit.  It
looks to me like under load, some random task gets a bonus, and
everybody else pays, whether deserving or not.

This diff fixed the regression for me at any load rate.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2007-08-28 12:53:24 +02:00
Hugh Dickins
d243769d3f fix bogus hotplug cpu warning
Fix bogus DEBUG_PREEMPT warning on x86_64, when cpu brought online after
bootup: current_is_keventd is right to note its use of smp_processor_id
is preempt-safe, but should use raw_smp_processor_id to avoid the warning.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-27 10:27:48 -07:00
Ingo Molnar
50c46637aa sched: s/sched_latency/sched_min_granularity
runtime limit and wakeup granularity used to be a function of
granularity and that was incorrect changed to sched_latency.

Fix this to make wakeup granularity a function of min-granularity,
and the runtime limit equal to latency.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-25 22:17:19 +02:00
Ingo Molnar
172ac3dbb7 sched: cleanup, sched_granularity -> sched_min_granularity
due to adaptive granularity scheduling the role of sched_granularity
has changed to "minimum granularity", so rename the variable (and the
tunable) accordingly.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2007-08-25 18:41:53 +02:00
Peter Zijlstra
218050855e sched: adaptive scheduler granularity
Instead of specifying the preemption granularity, specify the wanted
latency. By fixing the granlarity to a constany the wakeup latency
it a function of the number of running tasks on the rq.

Invert this relation.

sysctl_sched_granularity becomes a minimum for the dynamic granularity
computed from the new sysctl_sched_latency.

Then use this latency to do more intelligent granularity decisions: if
there are fewer tasks running then we can schedule coarser. This helps
performance while still always keeping the latency target.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-25 18:41:53 +02:00
Peter Zijlstra
1fc84aaae3 sched: fix CONFIG_SCHED_DEBUG dependency of lockdep sysctls
Make the lockdep sysctls not depend on CONFIG_SCHED_DEBUG.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-25 18:41:52 +02:00
Ingo Molnar
095e56c703 sched: fix startup penalty calculation
fix task startup penalty miscalculation: sysctl_sched_granularity is
unsigned int and wait_runtime is long so we first have to convert it
to long before turning it negative ...

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-24 20:39:10 +02:00
Peter Zijlstra
ea0aa3b23a sched: simplify bonus calculation #2
current code:

 delta = calc_delta_mine(delta_exec, curr->load.weight, lw);
 delta = min((u64)delta, cfs_rq->sleeper_bonus);

Notice that this calc_delta_mine() line is exactly delta_mine, which
gives:

 delta = min((u64)delta_mine, cfs_rq->sleeper_bonus);

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-24 20:39:10 +02:00
Peter Zijlstra
a6f2994042 sched: simplify bonus calculation #1
current code:

 delta = min(cfs_rq->sleeper_bonus, (u64)delta_exec);
 delta = calc_delta_mine(delta, curr->load.weight, lw);
 delta = min((u64)delta, cfs_rq->sleeper_bonus);

drop the first min(), because we clip against sleeper_bonus in the 3rd line
again. That gives:

 delta = calc_delta_mine(delta_exec, curr->load.weight, lw);
 delta = min((u64)delta, cfs_rq->sleeper_bonus);

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-24 20:39:10 +02:00
Ingo Molnar
b2133c8b1e sched: tidy up and simplify the bonus balance
make the bonus balance more consistent: do not hand out a bonus if
there's too much in flight already, and only deduct as much from a
runner as it has the capacity. This makes the bonus engine a zero-sum
game (as intended).

this also simplifies the code:

   text    data     bss     dec     hex filename
  34770    2998      24   37792    93a0 sched.o.before
  34749    2998      24   37771    938b sched.o.after

and it also avoids overscheduling in sleep-happy workloads like
hackbench.c.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-24 20:39:10 +02:00
Dmitry Adamushko
98fbc79853 sched: optimize task_tick_rt() a bit
Mitchell Erblich suggested a quality-of-implementation change to
not requeue SCHED_RR tasks if there's only a single task on the
runqueue, by checking for rq->nr_running == 1.

provide a more efficient implementation of that, to check that
particular RT priority-queue only.

[ From: mingo@elte.hu ]

Also first requeue the task then set need_resched - results in slightly
better machine-instruction ordering. Also clean up the code a bit.

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-24 20:39:10 +02:00
Sven-Thorsten Dietrich
deac4ee65a sched: simplify can_migrate_task()
Remove trivial conditional branch in Linux scheduler's
can_migrate_task() function.

   text    data     bss     dec     hex filename
   34770    2998      24   37792    93a0 sched.o.before
   34757    2998      24   37779    9393 sched.o.after

Signed-off-by: Sven-Thorsten Dietrich <sven@thebigcorporation.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-24 20:39:10 +02:00
Ingo Molnar
71fd371463 sched: remove HZ dependency from the granularity default
remove HZ dependency from the granularity default. Use 10 msec for
the base granularity, 1 msec for wakeup granularity and 25 msec for
batch wakeup granularity. (These defaults are close to the values
that the default HZ=250 setting got previously, and thus it's the
most common setting.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-24 20:39:10 +02:00
Bruce Ashfield
7c6c16f354 sched: CONFIG_SCHED_GROUP_FAIR=y fixlet
when I built with CONFIG_FAIR_GROUP_SCHED=y, I need the following change
to make things right.

[ From: mingo@elte.hu ]

this config option is not upstream-configurable right now but lets fix
this for completeness.

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-24 20:39:10 +02:00
Linus Torvalds
d0797b39dc Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: tweak the sched_runtime_limit tunable
  sched: skip updating rq's next_balance under null SD
  sched: fix broken SMT/MC optimizations
  sched: accounting regression since rc1
  sched: fix sysctl directory permissions
  sched: sched_clock_idle_[sleep|wakeup]_event()
2007-08-23 21:38:39 -07:00
Linus Torvalds
de80af4cc9 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  sysfs: don't warn on removal of a nonexistent binary file
  HOWTO: latest lxr url address changed
  HOWTO: korean translation of Documentation/HOWTO
  Fix Off-by-one in /sys/module/*/refcnt
  sysfs: fix locking in sysfs_lookup() and sysfs_rename_dir()
2007-08-23 21:34:43 -07:00
Ingo Molnar
505c0efd58 sched: tweak the sched_runtime_limit tunable
Michael Gerdau reported reniced task CPU usage weirdnesses.
Such symptoms can be caused by limit underruns so double the
sched_runtime_limit.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-23 15:18:02 +02:00
Suresh Siddha
f549da848e sched: skip updating rq's next_balance under null SD
Was playing with sched_smt_power_savings/sched_mc_power_savings and
found out that while the scheduler domains are reconstructed when sysfs
settings change, rebalance_domains() can get triggered with null domain
on other cpus, which is setting next_balance to jiffies + 60*HZ.
Resulting in no idle/busy balancing for 60 seconds.

Fix this.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-23 15:18:02 +02:00
Suresh Siddha
f8700df7c4 sched: fix broken SMT/MC optimizations
On a four package system with HT - HT load balancing optimizations were
broken.  For example, if two tasks end up running on two logical threads
of one of the packages, scheduler is not able to pull one of the tasks
to a completely idle package.

In this scenario, for nice-0 tasks, imbalance calculated by scheduler
will be 512 and find_busiest_queue() will return 0 (as each cpu's load
is 1024 > imbalance and has only one task running).

Similarly MC scheduler optimizations also get fixed with this patch.

[ mingo@elte.hu: restored fair balancing by increasing the fuzz and
                 adding it back to the power decision, without the /2
                 factor. ]

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-23 15:18:02 +02:00
Eric W. Biederman
c57baf1e1e sched: fix sysctl directory permissions
There are two remaining gotchas:

- The directories have impossible permissions (writeable).

- The ctl_name for the kernel directory is inconsistent with
  everything else.  It should be CTL_KERN.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-23 15:18:02 +02:00
Ingo Molnar
2aa44d0567 sched: sched_clock_idle_[sleep|wakeup]_event()
construct a more or less wall-clock time out of sched_clock(), by
using ACPI-idle's existing knowledge about how much time we spent
idling. This allows the rq clock to work around TSC-stops-in-C2,
TSC-gets-corrupted-in-C3 type of problems.

( Besides the scheduler's statistics this also benefits blktrace and
  printk-timestamps as well. )

Furthermore, the precise before-C2/C3-sleep and after-C2/C3-wakeup
callbacks allow the scheduler to get out the most of the period where
the CPU has a reliable TSC. This results in slightly more precise
task statistics.

the ACPI bits were acked by Len.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Len Brown <len.brown@intel.com>
2007-08-23 15:18:02 +02:00
Oleg Nesterov
834d216e1f signalfd: fix interaction with posix-timers
dequeue_signal:

	if (__SI_TIMER) {
		spin_unlock(&tsk->sighand->siglock);
		do_schedule_next_timer(info);
		spin_lock(&tsk->sighand->siglock);
	}

Unless tsk == curent, this is absolutely unsafe: nothing prevents tsk from
exiting. If signalfd was passed to another process, do_schedule_next_timer()
is just wrong.

Add yet another "tsk == current" check into dequeue_signal().

This patch fixes an oopsable bug, but breaks the scheduling of posix timers
if the shared __SI_TIMER signal was fetched via signalfd attached to another
sub-thread. Mostly fixed by the next patch.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Roland McGrath <roland@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:46 -07:00
Oleg Nesterov
d02479bdeb posix-timers: fix creation race
sys_timer_create() sets ->it_process and unlocks ->siglock, then checks
tmr->it_sigev_notify to define if get_task_struct() is needed.

We already passed ->it_id to the caller, another thread can delete this timer
and free its memory in between.

As a minimal fix, move this code under ->siglock, sys_timer_delete() takes it
too before calling release_posix_timer().  A proper serialization would be to
take ->it_lock, we add a partly initialized timer on posix_timers_id, not
good.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:46 -07:00
Thomas Gleixner
179394af7a posix-timers: fix deletion race
timer_delete does:
	lock_timer();
	timer->it_process = NULL;
	unlock_timer();
	release_posix_timer();

timer->it_process is checked in lock_timer() to prevent access to a
timer, which is on the way to be deleted, but the check happens after
idr_lock is dropped. This allows release_posix_timer() to delete the
timer before the lock code can check the timer:

  CPU 0				CPU 1

  lock_timer();
  timer->it_process = NULL;
  unlock_timer();
				lock_timer()
					spin_lock(idr_lock);
					timer = idr_find();
					spin_lock(timer->lock);
					spin_unlock(idr_lock);
  release_posix_timer();
	spin_lock(idr_lock);
	idr_remove(timer);
	spin_unlock(idr_lock);
	free_timer(timer);
					if (timer->......)

Change the locking to prevent this.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:45 -07:00
Andrew Morton
8b7f07155f free_irq(): fix DEBUG_SHIRQ handling
If we're going to run the handler from free_irq() then we must do it with
local irq's disabled.  Otherwise lockdep complains that the handler is taking
irq-safe spinlocks in a non-irq-safe fashion.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
john stultz
187226f57f futex_unlock_pi() hurts my brain and may cause application deadlock
Avoid futex_unlock_pi returning -EFAULT (which results in deadlock), by
clearing uval before jumping to retry_locked.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
Adrian Bunk
88ae704c2a kernel/auditsc.c: fix an off-by-one
This patch fixes an off-by-one in a BUG_ON() spotted by the Coverity
checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Amy Griffis <amy.griffis@hp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
Alexey Dobriyan
256e2fdf03 Fix Off-by-one in /sys/module/*/refcnt
sysfs internals were changed to not pin module in question.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 14:35:35 -07:00
Robin Getz
cb00e99c0a fix - ensure we don't use bootconsoles after init has been released
Gerd Hoffmann pointed out that my patch from yesterday can lead
to a null pointer dereference if the kernel is booted with no
console, and no earlyprintk defined. This fixes that issue.

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-21 20:23:53 -07:00
Robin Getz
0c5564bd91 ensure we don't use bootconsoles after init has been released
This is a followup to the cleanups for earlyprintk patch from Gerd Hoffmann

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=69331af79cf29e26d1231152a172a1a10c2df511

This ensures that a bootconsole is unregistered if it is not replaced.
The current implementation spews garbage out the bootconsole in this case,
since the bootconsole structure is normally in the init section, and is
freed, but still used.

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-20 22:42:01 -07:00
Christian Heim
e598fbaabd Remove double inclusion of linux/capability.h
Remove the second inclusion of linux/capability.h, which has been
introduced with "[PATCH] move capable() to capability.h" (commit
c59ede7b78)

Signed-off-by: Christian Heim <phreak@gentoo.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-19 10:12:32 -07:00
Linus Torvalds
738ddd3039 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: run_rebalance_domains: s/SCHED_IDLE/CPU_IDLE/
  sched: fix sleeper bonus
  sched: make global code static
2007-08-12 11:06:45 -07:00
Thomas Gleixner
2464286ace genirq: suppress resend of level interrupts
Level type interrupts are resent by the interrupt hardware when they are
still active at irq_enable().

Suppress the resend mechanism for interrupts marked as level.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-12 11:05:45 -07:00
Thomas Gleixner
496634217e genirq: cleanup mismerge artifact
Commit 5a43a066b1: "genirq: Allow fasteoi
handler to retrigger disabled interrupts" was erroneously applied to
handle_level_irq().  This added the irq retrigger / resend functionality
to the level irq handler.

Revert the offending bits.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-12 11:05:45 -07:00
Oleg Nesterov
de0cf899bb sched: run_rebalance_domains: s/SCHED_IDLE/CPU_IDLE/
rebalance_domains(SCHED_IDLE) looks strange (typo), change it to CPU_IDLE.

the effect of this bug was slightly more agressive idle-balancing on
SMP than intended.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-12 18:08:19 +02:00
Ingo Molnar
5d2b3d3695 sched: fix sleeper bonus
Peter Ziljstra noticed that the sleeper bonus deduction code
was not properly rate-limited: a task that scheduled more
frequently would get a disproportionately large deduction.
So limit the deduction to delta_exec.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-12 18:08:19 +02:00
Adrian Bunk
6707de00fd sched: make global code static
This patch makes the following needlessly global code static:

- arch_reinit_sched_domains()
- struct attr_sched_mc_power_savings
- struct attr_sched_smt_power_savings

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-12 18:08:19 +02:00
Linus Torvalds
d291676ce8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched debug: dont print kernel address in /proc/sched_debug
  sched: fix typo in the FAIR_GROUP_SCHED branch
  sched: improve rq-clock overflow logic
2007-08-11 15:58:37 -07:00
Peter Chubb
cd5bfea278 fix compilation with gcc 4.2
gcc-4.2 is a lot more picky about its symbol handling.  EXPORT_SYMBOL no
longer works on symbols that are undefined or defined with static scope.

For example, with CONFIG_PROFILE off, I see:

  kernel/profile.c:206: error: __ksymtab_profile_event_unregister causes a section type conflict
  kernel/profile.c:205: error: __ksymtab_profile_event_register causes a section type conflict

This patch moves the EXPORTs inside the #ifdef CONFIG_PROFILE, so we
only try to export symbols that are defined.

Also, in kernel/kprobes.c there's an EXPORT_SYMBOL_GPL() for
jprobes_return, which if CONFIG_JPROBES is undefined is a static
inline and gives the same error.

And in drivers/acpi/resources/rsxface.c, there's an
ACPI_EXPORT_SYMBOPL() for a static symbol. If it's static, it's not
accessible from outside the compilation unit, so should bot be exported.

These three changes allow building a zx1_defconfig kernel with gcc 4.2
on IA64.

[akpm@linux-foundation.org: export jpobe_return properly]
Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:42 -07:00
Miao Xie
6ddfca9548 timer: remove clockevents_unregister_notifier
I find a function(clockevents_unregister_notifier) which is not called by
anything in tree.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:42 -07:00
Rafael J. Wysocki
c5a69adff9 Hibernation: do not try to mark invalid PFNs as nosave
On some systems some PFNs reported by the early initialization code as
'nosave' may be invalid.  If we try to set the corresponding bits in the
hibernation bitmap, BUG_ON() in memory_bm_find_bit() will be triggered and
the system won't be able to boot (cf.
https://bugzilla.novell.com/show_bug.cgi?id=296242).

Prevent this from happening by verifying if the 'nosave' PFNs are valid in
mark_nosave_pages().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:40 -07:00
Lee Schermerhorn
8daec965e7 Fix missing numa_zonelist_order sysctl
Misplaced #endif is hiding the numa_zonelist_order sysctl when !SECURITY.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:40 -07:00
Ingo Molnar
5167e75f4d sched debug: dont print kernel address in /proc/sched_debug
Arjan van de Ven pointed out that we should not print kernel addresses
in world-readable /proc files - fix that.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-08-10 23:05:11 +02:00
Ingo Molnar
e56f31aad9 sched: fix typo in the FAIR_GROUP_SCHED branch
while there's no in-tree way to turn group scheduling at the moment,
fix a typo in it nevertheless.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-10 23:05:11 +02:00
Ingo Molnar
529c77261b sched: improve rq-clock overflow logic
improve the rq-clock overflow logic: limit the absolute rq->clock
delta since the last scheduler tick, instead of limiting the delta
itself.

tested by Arjan van de Ven - whole laptop was misbehaving due to
an incorrectly calibrated cpu_khz confusing sched_clock().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-08-10 23:05:11 +02:00
Linus Torvalds
be12014dd7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: (61 commits)
  sched: refine negative nice level granularity
  sched: fix update_stats_enqueue() reniced codepath
  sched: round a bit better
  sched: make the multiplication table more accurate
  sched: optimize update_rq_clock() calls in the load-balancer
  sched: optimize activate_task()
  sched: clean up set_curr_task_fair()
  sched: remove __update_rq_clock() call from entity_tick()
  sched: move the __update_rq_clock() call to scheduler_tick()
  sched debug: remove the 'u64 now' parameter from print_task()/_rq()
  sched: remove the 'u64 now' local variables
  sched: remove the 'u64 now' parameter from deactivate_task()
  sched: remove the 'u64 now' parameter from dequeue_task()
  sched: remove the 'u64 now' parameter from enqueue_task()
  sched: remove the 'u64 now' parameter from dec_nr_running()
  sched: remove the 'u64 now' parameter from inc_nr_running()
  sched: remove the 'u64 now' parameter from dec_load()
  sched: remove the 'u64 now' parameter from inc_load()
  sched: remove the 'u64 now' parameter from update_curr_load()
  sched: remove the 'u64 now' parameter from ->task_new()
  ...
2007-08-09 08:23:31 -07:00
Linus Torvalds
88ffc35059 Revert "genirq: temporary fix for level-triggered IRQ resend"
This reverts commit 0fc4969b86.  It was
always meant to be temporary, but it's generating more useless noise
than anything else, and we probably should never have done it in the
generic kernel (only had the people involved test it on their own).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-09 08:10:16 -07:00
Ingo Molnar
7cff8cf61c sched: refine negative nice level granularity
refine the granularity of negative nice level tasks: let them
reschedule more often to offset the effect of them consuming
their wait_runtime proportionately slower. (This makes nice-0
task scheduling smoother in the presence of negatively
reniced tasks.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:52 +02:00
Ingo Molnar
a69edb5560 sched: fix update_stats_enqueue() reniced codepath
the key has to be rescaled to /weight even if it has a positive value.

(this change only affects the scheduling of reniced tasks)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:52 +02:00
Ingo Molnar
194081ebfa sched: round a bit better
round a tiny bit better in high-frequency rescheduling scenarios,
by rounding around zero instead of rounding down.

(this is pretty theoretical though)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:51 +02:00
Ingo Molnar
254753dc32 sched: make the multiplication table more accurate
do small deltas in the weight and multiplication constant table so
that the worst-case numeric error is better than 1:100000000. (8 digits)

the current error table is:

     nice       mult *   inv_mult   error
     ------------------------------------------
     -20:      88761 *      48388  -0.0000000065
     -19:      71755 *      59856  -0.0000000037
     -18:      56483 *      76040   0.0000000056
     -17:      46273 *      92818   0.0000000042
     -16:      36291 *     118348  -0.0000000065
     -15:      29154 *     147320  -0.0000000037
     -14:      23254 *     184698  -0.0000000009
     -13:      18705 *     229616  -0.0000000037
     -12:      14949 *     287308  -0.0000000009
     -11:      11916 *     360437  -0.0000000009
     -10:       9548 *     449829  -0.0000000009
      -9:       7620 *     563644  -0.0000000037
      -8:       6100 *     704093   0.0000000009
      -7:       4904 *     875809   0.0000000093
      -6:       3906 *    1099582  -0.0000000009
      -5:       3121 *    1376151  -0.0000000058
      -4:       2501 *    1717300   0.0000000009
      -3:       1991 *    2157191  -0.0000000035
      -2:       1586 *    2708050   0.0000000009
      -1:       1277 *    3363326   0.0000000014
       0:       1024 *    4194304   0.0000000000
       1:        820 *    5237765   0.0000000009
       2:        655 *    6557202   0.0000000033
       3:        526 *    8165337  -0.0000000079
       4:        423 *   10153587   0.0000000012
       5:        335 *   12820798   0.0000000079
       6:        272 *   15790321   0.0000000037
       7:        215 *   19976592  -0.0000000037
       8:        172 *   24970740  -0.0000000037
       9:        137 *   31350126  -0.0000000079
      10:        110 *   39045157  -0.0000000061
      11:         87 *   49367440  -0.0000000037
      12:         70 *   61356676   0.0000000056
      13:         56 *   76695844  -0.0000000075
      14:         45 *   95443717  -0.0000000072
      15:         36 *  119304647  -0.0000000009
      16:         29 *  148102320  -0.0000000037
      17:         23 *  186737708  -0.0000000028
      18:         18 *  238609294  -0.0000000009
      19:         15 *  286331153  -0.0000000002

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:51 +02:00
Ingo Molnar
6e82a3befe sched: optimize update_rq_clock() calls in the load-balancer
optimize update_rq_clock() calls in the load-balancer: update them
right after locking the runqueue(s) so that the pull functions do
not have to call it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:51 +02:00
Ingo Molnar
2daa357705 sched: optimize activate_task()
optimize activate_task() by removing update_rq_clock() from it.
(and add update_rq_clock() to all callsites of activate_task() that
did not have it before.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:51 +02:00
Ingo Molnar
c3b64f1e4f sched: clean up set_curr_task_fair()
clean up set_curr_task_fair().

( identity transformation that causes no change in functionality. )

   text    data     bss     dec     hex filename
  39170    3750      36   42956    a7cc sched.o.before
  39170    3750      36   42956    a7cc sched.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:51 +02:00
Ingo Molnar
d9e0e6aa6d sched: remove __update_rq_clock() call from entity_tick()
remove __update_rq_clock() call from entity_tick().

no change in functionality because scheduler_tick() already calls
__update_rq_clock().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:51 +02:00
Ingo Molnar
546fe3c909 sched: move the __update_rq_clock() call to scheduler_tick()
move the __update_rq_clock() call from update_cpu_load() to
scheduler_tick().

( identity transformation that causes no change in functionality. )

this allows the direct use of rq->clock in ->task_tick() functions.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:51 +02:00
Ingo Molnar
a48da48b40 sched debug: remove the 'u64 now' parameter from print_task()/_rq()
remove the 'u64 now' parameter from sched_debug.c:print_task()/_rq().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:51 +02:00
Ingo Molnar
bdd4dfa89c sched: remove the 'u64 now' local variables
final step: remove all (now superfluous) 'u64 now' variables.

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:51 +02:00
Ingo Molnar
2e1cb74a50 sched: remove the 'u64 now' parameter from deactivate_task()
remove the 'u64 now' parameter from deactivate_task().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:49 +02:00
Ingo Molnar
69be72c13d sched: remove the 'u64 now' parameter from dequeue_task()
remove the 'u64 now' parameter from dequeue_task().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:49 +02:00
Ingo Molnar
8159f87e2b sched: remove the 'u64 now' parameter from enqueue_task()
remove the 'u64 now' parameter from enqueue_task().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:49 +02:00
Ingo Molnar
db53181e41 sched: remove the 'u64 now' parameter from dec_nr_running()
remove the 'u64 now' parameter from dec_nr_running().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:49 +02:00
Ingo Molnar
e5fa2237b5 sched: remove the 'u64 now' parameter from inc_nr_running()
remove the 'u64 now' parameter from inc_nr_running().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:49 +02:00
Ingo Molnar
79b5dddf83 sched: remove the 'u64 now' parameter from dec_load()
remove the 'u64 now' parameter from dec_load().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:49 +02:00
Ingo Molnar
29b4b623fe sched: remove the 'u64 now' parameter from inc_load()
remove the 'u64 now' parameter from inc_load().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:49 +02:00
Ingo Molnar
84a1d7a2f9 sched: remove the 'u64 now' parameter from update_curr_load()
remove the 'u64 now' parameter from update_curr_load().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:49 +02:00
Ingo Molnar
ee0827d8b5 sched: remove the 'u64 now' parameter from ->task_new()
remove the 'u64 now' parameter from ->task_new().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:49 +02:00
Ingo Molnar
31ee529cc2 sched: remove the 'u64 now' parameter from ->put_prev_task()
remove the 'u64 now' parameter from ->put_prev_task().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:49 +02:00
Ingo Molnar
ff95f3df54 sched: remove the 'u64 now' parameter from pick_next_task()
remove the 'u64 now' parameter from pick_next_task().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:49 +02:00
Ingo Molnar
fb8d472402 sched: remove the 'u64 now' parameter from ->pick_next_task()
remove the 'u64 now' parameter from ->pick_next_task().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:48 +02:00
Ingo Molnar
f02231e51a sched: remove the 'u64 now' parameter from ->dequeue_task()
remove the 'u64 now' parameter from ->dequeue_task().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:48 +02:00
Ingo Molnar
fd390f6a04 sched: remove the 'u64 now' parameter from ->enqueue_task()
remove the 'u64 now' parameter from ->enqueue_task().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:48 +02:00
Ingo Molnar
f1e14ef64d sched: remove the 'u64 now' parameter from update_curr_rt()
remove the 'u64 now' parameter from update_curr_rt().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:48 +02:00
Ingo Molnar
ab6cde2692 sched: remove the 'u64 now' parameter from put_prev_entity()
remove the 'u64 now' parameter from put_prev_entity().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:48 +02:00
Ingo Molnar
9948f4b2a7 sched: remove the 'u64 now' parameter from pick_next_entity()
remove the 'u64 now' parameter from pick_next_entity().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:48 +02:00
Ingo Molnar
8494f412ed sched: remove the 'u64 now' parameter from set_next_entity()
remove the 'u64 now' parameter from set_next_entity().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:48 +02:00
Ingo Molnar
525c2716a4 sched: remove the 'u64 now' parameter from dequeue_entity()
remove the 'u64 now' parameter from dequeue_entity().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:48 +02:00
Ingo Molnar
668031ca8f sched: remove the 'u64 now' parameter from enqueue_entity()
remove the 'u64 now' parameter from enqueue_entity().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:48 +02:00
Ingo Molnar
2396af69be sched: remove the 'u64 now' parameter from enqueue_sleeper()
remove the 'u64 now' parameter from enqueue_sleeper().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:48 +02:00
Ingo Molnar
dfdc119e54 sched: remove the 'u64 now' parameter from __enqueue_sleeper()
remove the 'u64 now' parameter from __enqueue_sleeper().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:48 +02:00
Ingo Molnar
c7e9b5b293 sched: remove the 'u64 now' parameter from update_stats_curr_end()
remove the 'u64 now' parameter from update_stats_curr_end().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:48 +02:00
Ingo Molnar
19b6a2e370 sched: remove the 'u64 now' parameter from update_stats_dequeue()
remove the 'u64 now' parameter from update_stats_dequeue().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:48 +02:00
Ingo Molnar
79303e9e02 sched: remove the 'u64 now' parameter from update_stats_curr_start()
remove the 'u64 now' parameter from update_stats_curr_start().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:47 +02:00
Ingo Molnar
9ef0a9615b sched: remove the 'u64 now' parameter from update_stats_wait_end()
remove the 'u64 now' parameter from update_stats_wait_end().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:47 +02:00
Ingo Molnar
eac55ea376 sched: remove the 'u64 now' parameter from __update_stats_wait_end()
remove the 'u64 now' parameter from __update_stats_wait_end().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:47 +02:00
Ingo Molnar
d2417e5a3e sched: remove the 'u64 now' parameter from update_stats_enqueue()
remove the 'u64 now' parameter from update_stats_enqueue().

( identity transformation that causes no change in functionality. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 11:16:47 +02:00