Commit Graph

16266 Commits

Author SHA1 Message Date
Linus Torvalds
29e553631b Merge branch 'security' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
* 'security' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6:
  mac80211: fix spurious delBA handling
  mac80211: fix two remote exploits
2009-11-30 16:47:16 -08:00
Johannes Berg
827d42c9ac mac80211: fix spurious delBA handling
Lennert Buytenhek noticed that delBA handling in mac80211
was broken and has remotely triggerable problems, some of
which are due to some code shuffling I did that ended up
changing the order in which things were done -- this was

  commit d75636ef9c
  Author: Johannes Berg <johannes@sipsolutions.net>
  Date:   Tue Feb 10 21:25:53 2009 +0100

    mac80211: RX aggregation: clean up stop session

and other parts were already present in the original

  commit d92684e660
  Author: Ron Rindjunsky <ron.rindjunsky@intel.com>
  Date:   Mon Jan 28 14:07:22 2008 +0200

      mac80211: A-MPDU Tx add delBA from recipient support

The first problem is that I moved a BUG_ON before various
checks -- thereby making it possible to hit. As the comment
indicates, the BUG_ON can be removed since the ampdu_action
callback must already exist when the state is != IDLE.

The second problem isn't easily exploitable but there's a
race condition due to unconditionally setting the state to
OPERATIONAL when a delBA frame is received, even when no
aggregation session was ever initiated. All the drivers
accept stopping the session even then, but that opens a
race window where crashes could happen before the driver
accepts it. Right now, a WARN_ON may happen with non-HT
drivers, while the race opens only for HT drivers.

For this case, there are two things necessary to fix it:
 1) don't process spurious delBA frames, and be more careful
    about the session state; don't drop the lock

 2) HT drivers need to be prepared to handle a session stop
    even before the session was really started -- this is
    true for all drivers (that support aggregation) but
    iwlwifi which can be fixed easily. The other HT drivers
    (ath9k and ar9170) are behaving properly already.

Reported-by: Lennert Buytenhek <buytenh@marvell.com>
Cc: stable@kernel.org
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-30 13:55:51 -05:00
David S. Miller
0cae200eec b44: Fix wedge when using netconsole.
Fixes kernel bugzilla #14691

Due to the way netpoll works, it is perfectly legal to see
NAPI already scheduled when new device events are pending
in b44_interrupt().

So logging a message about it is wrong and in fact harmful.

Based upon a patch by Andreas Mohr.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-30 00:13:28 -08:00
Dan Carpenter
40be261dfd wan: cosa: drop chan->wsem on error path
The other paths all drop chan->wsem.  This was found by a static
checker (smatch).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-30 00:06:51 -08:00
Florian Fainelli
3c91c7ae84 ep93xx-eth: check for zero MAC address on probe, not on device open
If we happen to have registered the driver without passing
a MAC address, we will print a zero MAC address and register
the interface with this invalid address, this is confusin. This
patch moves the checking of a valid ethernet address and the
generation of a random one down from the open function to
the probe function.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 23:50:32 -08:00
Russell King - ARM Linux
d5ccd67bb7 NET: smc91x: Fix irq flags
smc91x.h defines SMC_IRQ_FLAGS to be -1 when it wants the interrupt
flags to be taken from the resource structure.  However, d280ead
changed this to checking for non-zero resource flags.

Unfortunately, this means that on some platforms, we end up passing
'-1' to request_irq rather than the desired result.  Combine the two
conditions into one so that the IRQ flags are taken from the resource
if either SMC_IRQ_FLAGS is -1 or the resource flags specify an
interrupt trigger.

This restores network on at least the Versatile platform.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 23:47:14 -08:00
Steve Glendinning
6c53b1b15e smsc9420: prevent BUG() if ethtool is called with interface down
This patch fixes a null pointer dereference BUG() if ethtool is used on
an smsc9420 interface while it is down, because the phy_dev is only
allocated while the interface is up.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 23:14:45 -08:00
Ivan Vecera
cc098dc705 r8169: restore mac addr in rtl8169_remove_one and rtl_shutdown
The newer chipsets (all PCI-E) are known that they need full power cycle
(AC or battery removal) to reset MAC address to a  hardwired one. Previous
patch to address this problem loads the original MAC address from EEPROM.
But it brought other problem for which it is necessary to introduce a new
module parameter.
However, it might suffice to restore the initial MAC address before
shutdown/reboot/kexec and when removing the module.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 23:12:52 -08:00
Roger Oksanen
98468efddb e100: Use pci pool to work around GFP_ATOMIC order 5 memory allocation failure
pci_alloc_consistent uses GFP_ATOMIC allocation that may fail on some systems
with limited memory (Bug #14265). pci_pool_alloc allows waiting with
GFP_KERNEL.

Tested-by: Karol Lewandowski <karol.k.lewandowski@gmail.com>
Signed-off-by: Roger Oksanen <roger.oksanen@cs.helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 17:17:29 -08:00
Patrick McHardy
8c2acc53fd macvlan: fix gso_max_size setting
gso_max_size must be set based on the value of the underlying device to
support devices not using the full 64k.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23 14:18:53 -08:00
David S. Miller
b5b5150977 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2009-11-23 14:01:47 -08:00
John W. Linville
54ab040d24 ath9k: set ps_default as false
Copied from original one-line patch here:

	http://bugzilla.kernel.org/show_bug.cgi?id=14267#c26

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23 16:17:21 -05:00
Antti Kaijanmäki
dcfcb256cc hso: fix soft-lockup
Fix soft-lockup in hso.c which is triggered on SMP machine when
modem is removed while file descriptor(s) under /dev are still open:

  old version called kref_put() too early which resulted in destroying
  hso_serial and hso_device objects which were still used later on.

Signed-off-by: Antti Kaijanmäki <antti.kaijanmaki@nomovok.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23 10:54:47 -08:00
Antti Kaijanmäki
9ce673d5e9 hso: fix debug routines
Signed-off-by: Antti Kaijanmäki <antti.kaijanmaki@nomovok.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23 10:54:24 -08:00
Giuseppe CAVALLARO
73cfe264c2 stmmac: do not fail when the timer cannot be used.
If the external timer cannot be used the driver
will continue to work without mitigation.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23 10:37:52 -08:00
Giuseppe CAVALLARO
e6e3625f3b stmmac: fixed a compilation error when use the external timer
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23 10:37:47 -08:00
Alexander Beregalov
63edaf6476 Au1x00: fix crash when trying register_netdev()
Andreas Lohre reported that the driver crashes when trying
to register_netdev(), he sugessted to move dev->netdev_ops initialization
before calling register_netdev(), it worked for him.

Reported-by: Andreas Lohre <alohre@gmail.com>
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-22 20:40:52 -08:00
Narender Kumar
5d09e534bb netxen : fix BOND_MODE_TLB/ALB mode.
o Along with netdev->perm_addr, mac address will be
  maintained in device private structure.

o Device limitation: We need to set mac address when ever
  interface comes up.

In ALB/TAL mode, bonding driver calls set_mac for all slave with bond mac address.
But bonding driver set netdev->dev_addr field to its original value,
after enslaving interfaces.

When ever active slave changes, it swap dev_addr of inactive slave with active.
Yet it doesn't notify driver about change in netdev->dev_addr.

As netxen driver need to set mac addr when ever interface comes up,
it can't rely on netdev->dev_addr field. Specially in case of bonding mode ALB/TLB.

Signed-off-by: Narender Kumar <narender.kumar@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-21 11:37:37 -08:00
Narender Kumar
a7483b0afa netxen: fix promisc for NX2031.
Kernel crashes, if promisc mode set without disabling rx queue.
Before changing mode in NX2031 chip, wait till rx queue drains.

Signed-off-by: Narender Kumar <narender.kumar@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-21 11:37:35 -08:00
Amit Kumar Salecha
5d521fd36d netxen: fix memory initialization
Avoid resetting memory during initialization, skip this memory
block during driver probe.

Signed-off-by: Amit Kumar Salecha <amit@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-21 11:37:32 -08:00
chaithrika@ti.com
507eebef86 TI DaVinci EMAC: Minor macro related updates
Use BIT for macro definitions wherever possible, remove
unused and redundant macros.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20 13:57:54 -08:00
David J. Choi
4a91ca4e18 drivers/net: ks8851_mll ethernet network driver -resubmit
Summary of Changes:

	-Fix to receive multicast packets by setting the corresponding hardware
	 bit during initialization.
	-Fix to re-enable the interface [by interface up command(ifup)] while the
	 interface is down.
	-Fix to be able to down the interface by passing the last parameter
	 correctly to request_irq().
	-Remove to read 4 extra bytes from the receiving queue after reading a
	 packet, even though it does not cause a predictable issue now.
	-Remove occurrences of transmission done interrupt in order to tx
	 throughput enhancement.
	-Enable IP checksum for packet receiving by setting the corresponding
	 hardware bit during initialization.
	-Relocate ks_enable_int()/ks_disable_int() in order not to declare those
	 functions at the beginning of the file.
	-Rename ks_enable()/_disable() to ks_enable_qmu()/ks_disable_qmu() in
	 order to give more meaningful names and relocate them not declaire
	 those functions at the beginning of the file.

Signed-off-by: David J. Choi <david.choi@micrel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20 13:53:36 -08:00
Geert Uytterhoeven
0ebe74e7ba net: ETHOC should depend on HAS_DMA
When building for Sun 3:

drivers/net/ethoc.c:1091: undefined reference to `dma_free_coherent'
drivers/built-in.o: In function `ethoc_probe':
drivers/net/ethoc.c:965: undefined reference to `dma_alloc_coherent'
drivers/net/ethoc.c:1063: undefined reference to `dma_free_coherent'

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20 13:53:33 -08:00
Bruce Allan
818f33313c e1000e: do not initiate autonegotiation during OEM configuration
When configuring the OEM bits in the PHY on 82577/82578, do not restart
autonegotiation if the firmware is blocking it (e.g. when an IDE-R session
is active) because the link must not go down.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20 13:53:32 -08:00
Bruce Allan
189983d469 e1000e: remove unnecessary 82577 workaround causing link issues
A workaround for pre-release versions of 82577 is causing link issues on
some switches.  The workaround is no longer needed on production parts so
remove it.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20 13:53:29 -08:00
Bruce Allan
610c992884 e1000e: flow control thresholds not correct when changing mtu
When changing MTU, save it off prior to resetting otherwise the flow control
thresholds may be miscalculated.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20 13:53:27 -08:00
Bruce Allan
4c86e0b945 e1000e: add Tx timeout factor for 100Mbps
On some devices (e.g. 82578) not having a Tx timeout factor when linked at
100Mbps can cause false reports of hardware hangs on busy hubs.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20 13:53:26 -08:00
Bruce Allan
29afd69063 e1000e: set flow control thresholds properly after enabling/disabling pause
When flow control (pause) parameters were changed via ethtool (i.e. enabled
or disabled), the newly calculated thresholds were not being written to the
device for non-fiber media.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20 13:53:24 -08:00
Bruce Allan
842ec8b64a e1000e: read of PHY register may access wrong page on 82578
Remove unnecessary workaround that mistakenly does not perform a page
select operation for PHY registers 29 and 30 (assuming these are the PHY
debug port address and data registers) on 82578 which can cause reads
of the Transmit with No Carrier Sense statistics register on page 778 to be
read from an incorrect page.  Also error out if the page select operation
fails.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20 13:53:22 -08:00
Bruce Allan
38eb394e33 e1000e: partial revert of 3ec2a2b8 plus FC workraround for 82577/8
Commit 3ec2a2b80f broke Tx/Rx when using
jumbo frames on certain parts (i.e. only PAUSE frames could be exchanged
once the high water mark was reached preventing normal packet traffic).
This patch reverts the breakage and sets appropriate high and low water
marks of the Rx FIFO for 82577/82578 which require a workaround due to a
flow control issue in hardware.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20 13:53:20 -08:00
Jaswinder Singh Rajput
30b768323f ixgbe: move tc variable to CONFIG_IXGBE_DCB
tc is required by CONFIG_IXGBE_DCB.
This also fixes compilation warning:

 drivers/net/ixgbe/ixgbe_main.c: In function ‘ixgbe_tx_is_paused’:
 drivers/net/ixgbe/ixgbe_main.c:245: warning: unused variable ‘tc’

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20 13:47:27 -08:00
Eric Dumazet
2b1c8b0f92 veth: Fix veth_get_stats()
veth_get_stats() can be called in parallel on several cpus.

It's better to not reset dev->stats as it could give wrong result on
one cpu. Use temporary variables, then store the final results.

Also, we should loop on every possible cpus, not only online cpus,
or cpu hotplug can suddenly give wrong veth stats.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-19 13:16:22 -08:00
Linus Torvalds
486bfe5c7c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits)
  cxgb3: fix premature page unmap
  ibm_newemac: Fix EMACx_TRTR[TRT] bit shifts
  vlan: Fix register_vlan_dev() error path
  gro: Fix illegal merging of trailer trash
  sungem: Fix Serdes detection.
  net: fix mdio section mismatch warning
  ppp: fix BUG on non-linear SKB (multilink receive)
  ixgbe: Fixing EEH handler to handle more than one error
  net: Fix the rollback test in dev_change_name()
  Revert "isdn: isdn_ppp: Use SKB list facilities instead of home-grown implementation."
  TI Davinci EMAC : Fix Console Hang when bringing the interface down
  smsc911x: Fix Console Hang when bringing the interface down.
  mISDN: fix error return in HFCmulti_init()
  forcedeth: mac address fix
  r6040: fix version printing
  Bluetooth: Fix regression with L2CAP configuration in Basic Mode
  Bluetooth: Select Basic Mode as default for SOCK_SEQPACKET
  Bluetooth: Set general bonding security for ACL by default
  r8169: Fix receive buffer length when MTU is between 1515 and 1536
  can: add the missing netlink get_xstats_size callback
  ...
2009-11-18 14:54:45 -08:00
Divy Le Ray
70e3bb504c cxgb3: fix premature page unmap
unmap Rx page only when guaranteed that this page won't be
used anymore to allocate rx page chunks.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18 05:11:14 -08:00
Dave Mitchell
4acc5a8eb4 ibm_newemac: Fix EMACx_TRTR[TRT] bit shifts
The TRT bit shifts were reversed for EMAC4 and non-EMAC4 during the
port from ibm_emac to ibm_newemac. This patch corrects that error.

Signed-off-by: Dave Mitchell <dmitchell@appliedmicro.com>
Acked-by: Feng Kan <fkan@appliedmicro.com>
Acked-by: Prodyut Hazarika <phazarika@appliedmicro.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18 05:11:09 -08:00
David S. Miller
e54d5512b6 sungem: Fix Serdes detection.
We need to look for the 'shared-pins' property to get
this right.

Based upon a patch by Hermann Lauer.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17 04:46:18 -08:00
Stephen Rothwell
f99b4a0284 net: fix mdio section mismatch warning
This fixes the following warning:

WARNING: drivers/net/phy/built-in.o(.devexit.text+0x70): Section mismatch in reference from the function .mdio_gpio_bus_destroy() to the function .devinit.text:.mdio_gpio_bus_deinit()
The function __devexit .mdio_gpio_bus_destroy() references
a function __devinit .mdio_gpio_bus_deinit().
This is often seen when error handling in the exit function
uses functionality in the init path.
The fix is often to remove the __devinit annotation of
.mdio_gpio_bus_deinit() so it may be used outside an init section.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17 04:04:40 -08:00
Ben McKeegan
82b3cc1a2f ppp: fix BUG on non-linear SKB (multilink receive)
PPP does not correctly call pskb_may_pull() on all necessary receive paths
before reading the PPP protocol, thus causing PPP to report seemingly
random 'unsupported protocols' and eventually trigger BUG_ON(skb->len <
skb->data_len) in skb_pull_rcsum() when receiving multilink protocol in
non-linear skbs.

ppp_receive_nonmp_frame() does not call pskb_may_pull() before reading the
protocol number.  For the non-mp receive path this is not a problem, as
this check is done in ppp_receive_frame().  For the mp receive path,
ppp_mp_reconstruct() usually copies the data into a new linear skb.
However, in the case where the frame is made up of a single mp fragment,
the mp header is pulled and the existing skb used.  This skb was then
passed to ppp_receive_nonmp_frame() without checking if the encapsulated
protocol header could safely be read.

Signed-off-by: Ben McKeegan <ben@netservers.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 23:51:34 -08:00
Breno Leitao
c0e1f68bce ixgbe: Fixing EEH handler to handle more than one error
After commmit 4b77b0a2ba EEH breaks
after the second error, since it calls pci_restore_state()
but it returns 0, since pci->state_saved is false.

So, this patch just call pci_save_state() after pci_restore_state().

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 23:51:32 -08:00
David S. Miller
8494347eed Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2009-11-16 23:43:01 -08:00
Sriram
5bfa2a17f2 TI Davinci EMAC : Fix Console Hang when bringing the interface down
In the NAPI poll function(emac_poll), check for netif_running()
is unnecassary. In addition to associated runtime overhead, it
also results in a continuous softirq loop when the interface is
brought down under heavy traffic(tested wit Traffic Generator).
Once the interface is disabled, the poll function always returns
zero(with the check for netif_running) and napi_complete() would
never get called resulting in softirq loop.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Acked-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:17:43 -08:00
Sriram
f88c5b9887 smsc911x: Fix Console Hang when bringing the interface down.
In the NAPI poll function, check for netif_running() is unnecassary.
In addition to associated runtime overhead, it also results in
continuous softirq loop when the interface is brought down under heavy
traffic(tested with Traffic Generator).Once the interface is disabled,
the poll function always returns zero(with the check for netif_running)
and napi_complete() would never get called resulting in softirq loop.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:17:41 -08:00
Stanislav O. Bezzubtsev
655a6595af forcedeth: mac address fix
Use the existing random_ether_addr() to generate random MAC
instead of doing it by-hand.

Signed-off-by: Stanislav O. Bezzubtsev <stas@lvk.cs.msu.su>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 21:17:02 -08:00
Florian Fainelli
3fa8486bae r6040: fix version printing
The version string already contains the printk level
specifying it again results in the following message
being printed:
<6>r6040: RDC R6040 NAPI ...

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 21:14:59 -08:00
Raimonds Cicans
8812304cf1 r8169: Fix receive buffer length when MTU is between 1515 and 1536
In r8169 driver MTU is used to calculate receive buffer size.
Receive buffer size is used to configure hardware incoming packet filter.

For jumbo frames:
Receive buffer size = Max frame size = MTU + 14 (ethernet header) + 4
(vlan header) + 4 (ethernet checksum) = MTU + 22

Bug:
driver for all MTU up to 1536 use receive buffer size 1536

As you can see from formula, this mean all IP packets > 1536 - 22
(for vlan tagged, 1536 - 18 for not tagged) are dropped by hardware
filter.

Example:

host_good>  ifconfig eth0 mtu 1536
host_r8169> ifconfig eth0 mtu 1536
host_good>  ping host_r8169
Ok
host_good>  ping -s 1500 host_r8169
Fail
host_good>  ifconfig eth0 mtu 7000
host_r8169> ifconfig eth0 mtu 7000
host_good>  ping -s 1500 host_r8169
Ok

Bonus: got rid of magic number 8

Signed-off-by: Raimonds Cicans <ray@apollo.lv>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13 19:56:56 -08:00
Wolfgang Grandegger
55369c0a64 can: add the missing netlink get_xstats_size callback
This patch adds the missing "get_xstats_size" callback for the
netlink interface, which is required if "fill_xstats" is used,
as pointed out by Patrick McHardy.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13 19:56:55 -08:00
Oliver Hartkopp
b93cf3f0bb can: Fix driver Kconfig structure
In 2.6.32-rc the new EMS USB CAN driver was contributed and added the Kconfig
entry right behind an entry of the same *vendor*. This teared the SJA1000
based driver selection into pieces.

This fix cleans up the 2.6.32-rc Kconfig files for the CAN drivers and moves
the SJA1000 and USB Kconfig portions into the belonging directories.

As there are many new CAN drivers in the queue getting this cleanup into
2.6.32-rc would massively reduce the problems for the upcoming drivers.

Thanks,
Oliver

Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13 19:56:55 -08:00
Breno Leitao
b8a623bf83 s2io: fixing a ethtool test that is broken
Due commit 4b77b0a2ba, it is not more
possible to pci_restore_state() more than once without calling
pci_save_state() in the middle.

Actually running a ethtool test on s2io makes the card inactive,
and it needs to unload/reload the module to fix.

This patch just save the state just after it restore in order to
keep the old behaviour

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13 19:56:53 -08:00
Larry Finger
21d6c270f1 p54usb: Remove DMA buffer from stack
On 2.6.32-rc6 from wireless-testing, the following warning is emitted:

------------[ cut here ]------------
WARNING: at lib/dma-debug.c:860 check_for_stack+0xaa/0xe0()
Hardware name: HP Pavilion dv2700 Notebook PC
ehci_hcd 0000:00:02.1: DMA-API: device driver maps memory fromstack
	 [addr=ffff8800b6e2bca8]
Modules linked in: <Removed>
Pid: 16378, comm: modprobe Not tainted 2.6.32-rc6-wl #244
Call Trace:
 [<ffffffff81049698>] warn_slowpath_common+0x78/0xb0
 [<ffffffff8104972c>] warn_slowpath_fmt+0x3c/0x40
 [<ffffffff811ae52a>] check_for_stack+0xaa/0xe0
 [<ffffffff811afc8d>] debug_dma_map_page+0xfd/0x170
 [<ffffffffa006297a>] usb_hcd_submit_urb+0x3da/0x9c0 [usbcore]
 [<ffffffff81076e6f>] ? lockdep_init_map+0x5f/0x5d0
 [<ffffffffa0063365>] usb_submit_urb+0xe5/0x260 [usbcore]
 [<ffffffffa0064b7e>] usb_start_wait_urb+0x5e/0xf0 [usbcore]
 [<ffffffffa0063943>] ? usb_init_urb+0x23/0x40 [usbcore]
 [<ffffffffa0064cd4>] usb_bulk_msg+0xc4/0x150 [usbcore]
 [<ffffffffa0441a91>] T.719+0x31/0x40 [p54usb]
 [<ffffffffa0441acf>] p54u_upload_firmware_3887+0x2f/0x490 [p54usb]
 [<ffffffffa049c667>] ? p54_parse_firmware+0x427/0x450 [p54common]
 <Rest of traceback removed>
---[ end trace f77df0316ddad3de ]---

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-13 17:33:49 -05:00
John W. Linville
8cc3174ef9 Revert "libipw: initiate cfg80211 API conversion"
This reverts commit b8ecd988b1.

Due to poor API call balancing by me, this commit not only broke ipw2200
if it can't find it's firmware, it broke ipw2100 basically anytime you
removed the module.  At this point in the cycle, let's just put it back
to a sane state and try again next time...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-13 17:33:48 -05:00