Commit Graph

350 Commits

Author SHA1 Message Date
Javier Martinez Canillas
a259f3896a mfd: max77686: Add Maxim 77802 PMIC support
Maxim MAX77802 is a power management chip that contains 10 high
efficiency Buck regulators, 32 Low-dropout (LDO) regulators used
to power up application processors and peripherals, a 2-channel
32kHz clock outputs, a Real-Time-Clock (RTC) and a I2C interface
to program the individual regulators, clocks outputs and the RTC.

This patch adds support for MAX77802 to the MAX77686 driver and is
based on a driver added to the Chrome OS kernel 3.8 by Simon Glass.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-25 15:31:48 +01:00
Javier Martinez Canillas
6f1c1e71d9 mfd: max77686: Convert to use regmap_irq
By using the generic IRQ support in the Register map API, it
is possible to get rid max77686-irq.c and simplify the code.

Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-21 16:54:26 +01:00
Chanwoo Choi
b7cde7078d mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption
This patch use regulator_suspend_prepare() function to prepare the proper state
of regulators for suspend state to remove un-necessary leakage power-consumption.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09 14:58:12 +01:00
Alexander Shiyan
10f9edaeaa mfd: mc13xxx: Use regmap irq framework for interrupts
This patch convert mc13xxx MFD driver to use regmap irq framework
for interrupt registration.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09 14:58:10 +01:00
Jean Delvare
c03842d89b mfd: Fix cs5535 dependencies
As far as I know, the CS5535 and CS5536 chipsets are companions of the
Geode series of processors, which are 32-bit only. So the CS5535
drivers are not needed on x86-64, except for build testing purpose.

This aligns the dependencies to what FB_GEODE already uses.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09 14:57:59 +01:00
Jean Delvare
84c3a8f6ea mfd: timberdale: Depend on X86_32
As far as I know the Timberdale chip was only used as a companion for
Intel Atom E600 series processors. As such, its drivers are only
useful on X86_32.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09 14:57:59 +01:00
Lee Jones
6ec9dc323b Merge branches 'ib-mfd-extcon-regulator-3.17', 'ib-mfd-gpio-3.17' and 'ib-mfd-mmc-3.17' into ibs-for-mfd-merged 2014-07-09 14:55:13 +01:00
Arnd Bergmann
9e8884872d mfd: davinci: Voicecodec needs regmap_mmio
Without REGMAP_MMIO, building that driver results in a link error:

drivers/built-in.o: In function `davinci_vc_probe':
:(.init.text+0x3c1c): undefined reference to `devm_regmap_init_mmio_clk'

This adds a Kconfig 'select' statement as the usual way to ensure
that REGMAP_MMIO is enabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-26 13:33:58 +01:00
Arnd Bergmann
f41716dc52 mfd: STw481x: Allow modular build
This driver depends on I2C, which may be a loadable module.
While you'd probably want both to be built-in in practice,
allowing a modular build avoids possible randconfig link
errors.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-26 13:33:50 +01:00
Arnd Bergmann
1c93c725d6 mfd: UCB1x00: Enable modular build
The UCB1200 / UCB1300 driver uses the MCP_SA11X0 driver, which
can be a loadable module, but this results in a link error
when UCB1200 itself is built-in:

drivers/built-in.o: In function `ucb1x00_io_set_dir':
:(.text+0x4a364): undefined reference to `mcp_reg_write'
drivers/built-in.o: In function `ucb1x00_io_write':
:(.text+0x4a3dc): undefined reference to `mcp_reg_write'
drivers/built-in.o: In function `ucb1x00_io_read':
:(.text+0x4a400): undefined reference to `mcp_reg_read'
drivers/built-in.o: In function `ucb1x00_adc_enable':
:(.text+0x4a460): undefined reference to `mcp_enable'
...

This can easily be resolved by making CONFIG_MCP_UCB1200 itself
a tristate option, since that causes Kconfig to track the
dependency correctly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-26 13:33:34 +01:00
Zhu, Lejun
7cf0a66f32 mfd: intel_soc_pmic: Crystal Cove support
This patch provides chip-specific support for Crystal Cove. Crystal
Cove is the PMIC in Baytrail-T platform.

Also adds Intel SoC PMIC support to the build files.

Signed-off-by: Yang, Bin <bin.yang@intel.com>
Signed-off-by: Zhu, Lejun <lejun.zhu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-17 15:59:38 +01:00
Robert Baldyga
342d669c1e mfd: max77693: Handle IRQs using regmap
This patch modifies mfd driver to use regmap for handling interrupts.
It allows to simplify irq handling process. This modifications needed
to make small changes in function drivers, which use interrupts.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-17 15:17:00 +01:00
Linus Torvalds
1fe9eb1847 Changes to existing drivers:
- Increase DT coverage - arizona, mc13xxx, stmpe-i2c, syscon, sun6i-prcm
  - Regmap use of and/or clean-up - tps65090, twl6040
  - Basic renaming - max14577
  - Use new cpufreq helpers -  db8500-prcmu
  - Increase regulator support - stmpe, arizona, wm5102
  - Reduce legacy GPIO overhead - stmpe
  - Provide necessary remove path - bcm590xx
  - Expand sysfs presence - kempld
  - Move driver specific code out to drivers - rtc-s5m, arizona
  - Clk handling - twl6040
  - Use managed (devm_*) resources - ipaq-micro
  - Clean-up/remove unused/duplicated code - tps65218, sec, pm8921, abx500-core
    		   		     	    db8500-prcmu, menelaus
  - Build/boot/sematic bug fixes - rtsx_usb, stmpe, bcm590xx, abx500, mc13xxx
                                   rdc321x-southbridge, mfd-core, sec, max14577
 				  syscon, cros_ec_spi
  - Constify stuff 		- sm501, tps65910, tps6507x, tps6586x, max77686,
    	    	  		  max8997, kempld, max77693, max8907, rtsx_usb
 				  db8500-prcmu, max8998, wm8400, sec, lp3943,
 				  max14577, as3711, omap-usb-host, ipaq-micro
 Support for new devices:
  - Add support for max77836 into max14577
  - Add support for tps658640 into tps6586x
  - Add support for cros-ec-i2c-tunnel into cros_ec
  - Add new driver for rtsx_usb_sdmmc and rtsx_usb_ms
  - Add new driver for axp20x
  - Add new driver for sun6i-prcm
  - Add new driver for ipaq-micro
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTkEAyAAoJEFGvii+H/HdhYdMP/j0MCmbORM9mr84Uuhi0PfBZ
 yE1zlhLQHtqQEcp4Ih6vWxIbgdhyHy3CqIiCKkhSTH0TWfreBX7DmlSc1QAKazpy
 sXeD/pB5TSIIfAHVh4NXF51WMzZ8OvQrmJQwdjUY1Sal2tlDCUdc84qtnn+3/J9N
 JIKpf4E1IeWojE8F3koKBcyE6ZzkAthIzWNDU9/y+sIZZEqPVRu9Y3mpdhPo6P3I
 9TboZ/s2cAwad56iArFMOCvtg1xpn0WyS0HgAxpSa9X5qLRjYPX5GnBBz8zKJYm3
 xHCiD6SgN29xX9W+MkcvtgEghhMfOkPgwF69u2/eagbtNEOm50cyLrvAe+SKjRvE
 pODs5yvHJap29cbVafHSdzV+zLZ51J/Oi/TFsG8/VBbd4DyW7oSM4juT20TFSiNt
 Edwzd4gicg/NxA7TupFCRQLgwAa3fnpPeCtsIims7LU7SclPuwNgS31isOGAkOvd
 mMaBa1clZb50Dy2iL8m1ugyqdOZXs9S24j3u+B0TTJyabMbNhDTGUwBG4/PrlJHq
 fIysx6CdNUGLikG2PybFvhCf3+FkEoPPtkloM1sblkhPHVunVlhXPRYAE90W2jUA
 dDQ2Aco/idWSGRZ5t7kA8OBN3+PwiIpxTt/D4eDmS7Qe/v3KXvhUYuKl2mD5+IfC
 StFiP5cd3zyJvWTeexuW
 =GYTU
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - increase DT coverage: arizona, mc13xxx, stmpe-i2c, syscon,
     sun6i-prcm
   - regmap use of and/or clean-up: tps65090, twl6040
   - basic renaming: max14577
   - use new cpufreq helpers: db8500-prcmu
   - increase regulator support: stmpe, arizona, wm5102
   - reduce legacy GPIO overhead: stmpe
   - provide necessary remove path: bcm590xx
   - expand sysfs presence: kempld
   - move driver specific code out to drivers: rtc-s5m, arizona
   - clk handling: twl6040
   - use managed (devm_*) resources: ipaq-micro
   - clean-up/remove unused/duplicated code: tps65218, sec, pm8921,
     abx500-core, db8500-prcmu, menelaus
   - build/boot/sematic bug fixes: rtsx_usb, stmpe, bcm590xx, abx500,
     mc13xxx, rdc321x-southbridge, mfd-core, sec, max14577, syscon,
     cros_ec_spi
   - constify stuff: sm501, tps65910, tps6507x, tps6586x, max77686,
     max8997, kempld, max77693, max8907, rtsx_usb, db8500-prcmu,
     max8998, wm8400, sec, lp3943, max14577, as3711, omap-usb-host,
     ipaq-micro

  Support for new devices:
   - add support for max77836 into max14577
   - add support for tps658640 into tps6586x
   - add support for cros-ec-i2c-tunnel into cros_ec
   - add new driver for rtsx_usb_sdmmc and rtsx_usb_ms
   - add new driver for axp20x
   - add new driver for sun6i-prcm
   - add new driver for ipaq-micro"

* tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (77 commits)
  mfd: wm5102: Correct default for LDO Control 2 register
  mfd: menelaus: Use module_i2c_driver
  mfd: tps65218: Terminate of match table
  mfd: db8500-prcmu: Remove check for CONFIG_DBX500_PRCMU_DEBUG
  mfd: ti-keystone-devctrl: Add bindings for device state control
  mfd: palmas: Format the header file
  mfd: abx500-core: Remove unused function abx500_dump_all_banks()
  mfd: arizona: Correct addresses of always-on trigger registers
  mfd: max14577: Cast to architecture agnostic data type
  i2c: ChromeOS EC tunnel driver
  mfd: cros_ec: Sync to the latest cros_ec_commands.h from EC sources
  mfd: cros_ec: spi: Increase cros_ec_spi deadline from 5ms to 100ms
  mfd: cros_ec: spi: Make the cros_ec_spi timeout more reliable
  mfd: cros_ec: spi: Add mutex to cros_ec_spi
  mfd: cros_ec: spi: Calculate delay between transfers correctly
  mfd: arizona: Correct error message for addition of main IRQ chip
  mfd: wm8997: Add registers for high power mode
  mfd: arizona: Add MICVDD to mapped regulators
  mfd: ipaq-micro: Make mfd_cell array const
  mfd: ipaq-micro: Use devm_ioremap_resource()
  ...
2014-06-06 12:08:39 -07:00
Linus Torvalds
4046136afb Char / misc driver patches for 3.16-rc1
Here is the big char / misc driver updates for 3.16-rc1.
 
 Lots of different driver updates for a variety of different drivers and
 minor driver subsystems.
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlONWI8ACgkQMUfUDdst+ykvQACdGxTChdEU7edElDAXeelVmu8v
 D1UAoLDvqwUsN7t5v+WG2wkOvhf5MEA7
 =tVMP
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into next

Pull char/misc driver patches from Greg KH:
 "Here is the big char / misc driver update for 3.16-rc1.

  Lots of different driver updates for a variety of different drivers
  and minor driver subsystems.

  All have been in linux-next with no reported issues"

* tag 'char-misc-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (79 commits)
  hv: use correct order when freeing monitor_pages
  spmi: of: fixup generic SPMI devicetree binding example
  applicom: dereferencing NULL on error path
  misc: genwqe: fix uninitialized return value in genwqe_free_sync_sgl()
  miscdevice.h: Simple syntax fix to make pointers consistent.
  MAINTAINERS: Add miscdevice.h to file list for char/misc drivers.
  mcb: Add support for shared PCI IRQs
  drivers: Remove duplicate conditionally included subdirs
  misc: atmel_pwm: only build for supported platforms
  mei: me: move probe quirk to cfg structure
  mei: add per device configuration
  mei: me: read H_CSR after asserting reset
  mei: me: drop harmful wait optimization
  mei: me: fix hw ready reset flow
  mei: fix memory leak of mei_clients array
  uio: fix vma io range check in mmap
  drivers: uio_dmem_genirq: Fix memory leak in uio_dmem_genirq_probe()
  w1: do not unlock unheld list_mutex in __w1_remove_master_device()
  w1: optional bundling of netlink kernel replies
  connector: allow multiple messages to be sent in one packet
  ...
2014-06-03 08:06:56 -07:00
Linus Walleij
dcc21cc09e mfd: Add driver for Atmel Microcontroller on iPaq h3xxx
This adds a driver for the Atmel Microcontroller found on the
iPAQ h3xxx series. This device handles some keys, the
touchscreen, and the battery monitoring.

This is a port of a driver from handhelds.org 2.6.21 kernel,
written by Alessandro Gardich based on Andrew Christians
original HAL-driver. It has been heavily cleaned and
converted to mfd-core by Dmitry Artamonow and rewritten
again for the v3.x series kernels by Linus Walleij,
bringing back some of the functionality lost from Andrew's
original driver.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alessandro Gardich <gremlin@gremlin.it>
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03 08:11:42 +01:00
Boris BREZILLON
d58603cc30 mfd: Add support for sun6i PRCM (Power/Reset/Clock Management) unit
The PRCM (Power/Reset/Clock Management) block exposes several subdevices
in different subsystems (clk, reset ...)

Add basic support for the PRCM unit with clk (AR100, AHB0, and APB0 clks)
and reset controller subdevices.

Other subdevices might be added later (if needed).

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03 08:11:40 +01:00
Carlo Caione
cfb61a4196 mfd: AXP20x: Add mfd driver for AXP20x PMIC
This patch introduces the preliminary support for PMICs X-Powers AXP202
and AXP209. The AXP209 and AXP202 are the PMUs (Power Management Unit)
used by A10, A13 and A20 SoCs and developed by X-Powers, a sister company
of Allwinner.

The core enables support for two subsystems:
- PEK (Power Enable Key)
- Regulators

Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03 08:11:25 +01:00
Lee Jones
28fee3fa0e Immutable branch between MFD and Extcon due for v3.16 merge-window.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTV7vmAAoJEFGvii+H/HdhStcQAIPXONkcTtnRijYYVo4+zMfY
 5lyEc7bpboK3FJW0SrSM3gt6jSjFayz7HN+oVd5ez73XYlKr+X4oap6GD1VnP+r2
 d2kc0ccfRa5oMPdeth0xabwmXnG2Cm3i3EwLGZAjxRAI72nmmTJu08HSWYSw9tBs
 oxKLuuYNhdIRAoEHrA5wyymb4fq2AdQrdNGEXZ9utZEK7z0+DRxD3LxeNEiW8dU2
 pU9XXlEbp9gQKsyiRL+MPxuFH7C7QpaQN1aryKupHEHtuRPjxqIsXETUsmxGt+sQ
 P3jN3FayYRYknqWSda+/lgEjkzw0CgeLFpR13emt5P2K8K8NPcV17mHhggWxFaes
 iGPi9cgotV9X2zxAgayAusunPRHEQ8Yz7bnQsXBuH04CbBgnu53gBUQyELQhJ2xO
 HBG6VVn5kXCpb80OWX/lTefEIN3yfuH15eV/cmBk3Qu6qqVFjCg6cBqi2b5QFPYN
 8ks/58ewbhKqh+T+yr7N70sXIfOF9aBIqREdnlp/uXaCYLkylSNaUPpxZTllDUnE
 QoJVTMwb/BgGKolhpfwva2UkVPt5C50w1+mNLh05d9IMF/C9kyQMcsC7rOa229LU
 XwtDoWFUTMzjNqTRBTLdElfkEnEET07xDvv3SQTAj30eTCaQs0+gxDMNSrDN/0zN
 u6uUTp1grfVVOoz1FPcS
 =q4Ul
 -----END PGP SIGNATURE-----
mergetag object a613b739b8
 type commit
 tag ib-mfd-omap-3.16
 tagger Lee Jones <lee.jones@linaro.org> 1398263769 +0100
 
 Immutable branch between MFD and ARM OMAP due for v3.16 merge-window.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTV9ADAAoJEFGvii+H/HdhPhkP/1Xoc6APceeJaX8jOmx0rxzQ
 PhYl3er5b3eYtxgGR8s8FrdVrYNyEytGZtMoQN3EYhVnq/ZvbPkR8zMruDszUHYP
 PBfcZJi4GBJIAQU30a8Dvla8UtFaph+IoxSd6E4hSIvb+UFjSvi9ZjQYX82gFop4
 TLeAPW4byQP2YKSkDUq5WzzMLbjQ+ZanJSrueYXmu4VOVgtA0+nBWVj5B8PD1m+O
 2Sp2vhdCPCgIsChQZl3i9h2HroUtomnNWeCdv0YzOwISlvUv+aBg7khK35Jtw7v3
 YeAx3YelQ3z2dnFS/ddEvLKthuTV5BfyGq+dJjMwBLrOv81rzHFBYLCRiABB0RgD
 EUEAv3IJ31SpjrsO0uXnGFp69gMsJgOwLRcjM8TfUi+Wd4YQcbl/tCYX2k7voJ6u
 fbpqarr1zgZpV7r1cX2ivsm8VY2bzQ7p2Dh681oQtHyM+RC94dVvGS0cAaVlnhYY
 MtJWEdtpY3hRcx5qVE8+8wf5RYyXjluhme1EGhO8VL13hMw7ofmtfl2OKN4WAsYO
 KIDMTVJ9RneUQQ6FOx270x17Gp01vxoHIV6pBMi7Uo65l7xrs2YEfgUJhp4eCVXT
 dD4appF5q090UwD7lYADztQZ8RB5GLELZH6Vkpw3qPtfqM97zSy9IFMzTxn446ic
 vdktkG6GJab2vg3mLxDf
 =izRQ
 -----END PGP SIGNATURE-----
mergetag object c42ba72ec3
 type commit
 tag ib-mfd-regulator-3.16
 tagger Lee Jones <lee.jones@linaro.org> 1398675220 +0100
 
 Immutable branch between MFD and Regulator due for v3.16 merge-window.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTXhcuAAoJEFGvii+H/HdhoJEQAI15rEldcSpzLCYiinEfiKUI
 d+6zn5Gx6pKtkfCWdplHxM82Fe5H/kbgCLq+SSCQ6DFrOGXC34i4JnmhdCvcaU/K
 OEtXsG1i2PNzJwMFcnXVW5wD6LnS/b+243XtBtfQ887j9A1R2tEM9ka+i5AP3+O2
 NoBT9DshWWnj16CRJbMMFgNqDI6+QUoirgKzOXLp9stuzrThYU7kaluyMmMUREAx
 tXl8jOBH2Nu0YBiVi6Cgn1xNqtX0Snc9UU1QcugJzuPtyseFsQGUp1cP/ahmeP0y
 EFzKoDbKpag1BV/IEsKWfiD6KEEPFd3IUcZugXIhlRKSGsEcIRTeu6PBFMq9FssF
 hfajzbTw7aDFmYq3Ifc4V6MGtalnCoJz0bsM5XA1voWqXJ+9Tqp4p/5xbJVn2ObA
 /e8k5ljeRH+PBuRKrxgmJJUP3n/QXlJMZ+IrI3BTSeMLu2xZ1U95ynbHO8s3Dxdd
 CpX4xbDq82cBn+JNG3K9+l8XTZUdaWwEQ18VylVcbBdEa4jS2lMyYKIFCJiERLNt
 LCD6hzMGjF7/qVeXhi9AyITEe1XrFSjeTv8WH2R3C4vVXLcjQ3bCnWTFlszbGBsK
 /H0dUWg0HofMrR/oATydWtrgj5F+1aEIdZZqDU0hUCvC849c62zprqXUe7TbP6FT
 yvAlikr5PGMIWw89DCn1
 =NGmT
 -----END PGP SIGNATURE-----

Merge branches 'ib-from-asoc-3.16', 'ib-from-pm-3.16', 'ib-from-regulator-3.16', 'ib-mfd-gpio-3.16' and 'ib-mfd-mmc-memstick-3.16', tags 'ib-mfd-extcon-3.16', 'ib-mfd-omap-3.16' and 'ib-mfd-regulator-3.16' into ibs-for-mfd-merged
2014-06-03 08:08:40 +01:00
Arnd Bergmann
b33cdd283b ARM: vexpress: refine dependencies for new code
The versatile express changes for 3.16 introduced a number of
build regressions for randconfig kernels by not tracking dependencies
between the components right.

This patch tries to rectify that:

* the mach-vexpress code cannot link without the syscfg driver,
  which in turn needs MFD_VEXPRESS_SYSREG
* various drivers call devm_regmap_init_vexpress_config(), which
  has to be exported so it can be used by loadable modules
* the configuration bus uses OF DT helper functions that are not
  available to platforms disable CONFIG_OF
* The sysreg driver exports GPIOs through gpiolib, which can
  be disabled on some platforms.
* The clocksource code cannot be built on platforms that don't
  use modern timekeeping but rely on gettimeoffset.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-26 21:26:52 +02:00
Pawel Moll
974cc7b934 mfd: vexpress: Define the device as MFD cells
This patch - finally, after over 6 months! :-( - addresses
Samuel's request to split the vexpress-sysreg driver into
smaller portions and define the device in a form of MFD
cells:

* LEDs code has been completely removed and replaced with
  "gpio-leds" nodes in the tree (referencing dedicated
  GPIO subnodes in sysreg - bindings documentation updated);
  this also better fits the reality as some variants of the
  motherboard don't have all the LEDs populated

* syscfg bridge code has been extracted into a separate
  driver (placed in drivers/misc for no better place)

* all the ID & MISC registers are defined as sysconf
  making them available for other drivers should they need
  to use them (and also to the user via /sys/kernel/debug/regmap
  which can be helpful in platform debugging)

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15 17:02:19 +01:00
Linus Walleij
5a826feedc mfd: stmpe: Probe properly from the Device Tree
The current STMPE I2C probing code does not really match the
compatible strings - it matches node names happening to give
the right device name. Instead, let's introduce some real
compatible matching, more complex, more accurate. Make the
driver depend on OF since all platforms using it are DT-only.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-05-09 10:51:09 +01:00
Krzysztof Kozlowski
aee2a57c74 mfd: max77836: Add MAX77836 support to max14577 driver
Add Maxim 77836 support to max14577 driver. The chipsets have same MUIC
component so the extcon, charger and regulators are almost the same. The
MAX77836 however has also PMIC and Fuel Gauge.

The MAX77836 uses three I2C slave addresses and has additional interrupts
(related to PMIC and Fuel Gauge). It has also Interrupt Source register,
just like MAX77686 and MAX77693.

The MAX77836 PMIC's TOPSYS and INTSRC interrupts are reported in the
PMIC block. The PMIC block has different I2C slave address and uses own
regmap so another regmap_irq_chip is needed.

Since we have two regmap_irq_chip, use shared interrupts on MAX77836.

This patch adds additional defines and functions to the max14577 MFD core
driver so the driver will handle both chipsets. Also this patch replaces
"0x1 << N" with BIT(N) in defines for register masks.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-23 14:08:54 +01:00
Arnd Bergmann
3033ee62c0 mfd: Remove obsolete ti-ssp driver
The tnetv107x platform is getting removed, so this driver
is not needed any more.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 09:00:07 +00:00
Matt Porter
037b60f2ca mfd: Add bcm590xx pmu driver
Add a driver for the BCM590xx PMU multi-function devices. The driver
initially supports regmap initialization and instantiation of the
voltage regulator device function of the PMU.

Signed-off-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:59:59 +00:00
Krzysztof Kozlowski
0c8a9dea21 mfd: max14577: Select REGMAP_IRQ
MAXIM 14577 MFD driver uses the regmap_irq_chip so it's Kconfig entry
should select REGMAP_IRQ.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:59:58 +00:00
Lee Jones
2d5d366a08 mfd: tps65218: Fix reported randconfig error
Reported error was:
  ERROR: "regmap_del_irq_chip" [drivers/mfd/tps65218.ko] undefined!
    when CONFIG_REGMAP_IRQ is not enabled.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:58:42 +00:00
Stephen Boyd
549f8db793 mfd: pm8921: Loosen Kconfig dependency
Allow this driver to be compiled on all ARM builds as it doesn't
rely on anything within arm/mach-msm.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:58:32 +00:00
Stephen Boyd
e7b81fca7d mfd: pm8921: Use ssbi regmap
Use a regmap so that the pm8xxx read/write APIs can be removed
once all consumer drivers are converted.

Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:58:31 +00:00
Stephen Boyd
dc1a95ccaa mfd: pm8921: Migrate to irqdomains
Convert this driver to use irqdomains so that the PMIC's child
devices can be converted to devicetree.

Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-03-19 08:58:29 +00:00
Stephen Boyd
cced3548ba mfd: pm8921: Update for genirq changes
Since this code has been marked broken for some time a few genirq
tree wide changes weren't made. set_irq_wake() was renamed to
irq_set_irq_wake() in commit a0cd9ca2b (genirq: Namespace
cleanup, 2011-02-10) and commit 10a8c383 (irq: introduce entry
and exit functions for chained handlers) introduced the chained
irq functions but this driver wasn't updated to use them. Fix
these problems and remove the BROKEN marking on this driver.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:58:29 +00:00
Stephen Boyd
bc866fc7a8 mfd: pm8xxx: Move pm8xxx-irq.c contents into only driver that uses it
The pm8xxx-irq.c code is practically mandatory given that the
pm8921-core driver will WARN about it missing and the Kconfig
marks it as default y when a PM8xxx chips is enabled. The only
reason the file was split out was because we planned to support
other pm8xxx chips with different pm8xxx-core.c files. Now that
we have DT on ARM this isn't necessary because we should be able
to support all the ssbi based PM8xxx chips in one driver and one
file with no data bloat. Let's move this code into the only
driver that uses it right now (pm8921) so that it's always compiled when
needed. In the future we can rename pm8921-core.c to something
more generic.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:58:28 +00:00
Michael Brunner
a3ee75092e mfd: kempld: Add support for COMe-mBT10, COMe-cBT6 and COMe-cHL6 to Kontron PLD driver
This patch adds DMI system IDs for the Kontron modules COMe-mBT10, COMe-cBT6
and COMe-cHL6 to the Kontron PLD driver. The list of supported products in
the module description is also updated.

Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Acked-by: Christian Rauch <christian.rauch@kontron.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:58:24 +00:00
Roger Tseng
730876be25 mfd: Add realtek USB card reader driver
Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Roger Tseng <rogerable@realtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:58:18 +00:00
Laszlo Papp
921a1b0c1a mfd: Trivial: Fix a grammar issues in MFD Kconfig
s/to support for/to add support for/

Signed-off-by: Laszlo Papp <lpapp@kde.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:58:14 +00:00
Keerthy
44b4dc6163 mfd: tps65218: Add driver for the TPS65218 PMIC
The TPS65218 chip is a power management IC for Portable Navigation Systems
and Tablet Computing devices. It contains the following components:

 - Regulators.
 - Over Temperature warning and Shut down.

This patch adds support for tps65218 mfd device. At this time only
the regulator functionality is made available.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:58:06 +00:00
Linus Walleij
a6e6e660ba mfd: Include all drivers in subsystem menu
It is currently not possible to select the SA1100 or Vexpress
drivers in the MFD subsystem, because the menu for the entire
subsystem ends before these options are presented.

Move the main menu closing and the endif for HAS_IOMEM to the
end of the file so these are selectable again.

Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:58:01 +00:00
Sebastian Reichel
b2931b98ce mfd: twl4030-madc: Move driver to drivers/iio/adc
This is a driver for an A/D converter, which belongs into
drivers/iio/adc.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18 08:16:20 +00:00
Alexander Shiyan
e5a3da2143 mfd: mc13xxx: Remove useless symbol MFD_MC13783
Symbol MFD_MC13783 always selected by MFD_MC13XXX, so no need
to keep additional symbol.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21 08:28:09 +00:00
Thierry Reding
fcfccdb22f mfd: cros ec: spi: Depend on OF
The driver is not used on any non-DT platform, so it can depend on the
OF Kconfig symbol to make that explicit. This is in preparation of a
subsequent patch which parses some parameters from the device tree and
would otherwise have to conditionalize that code.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21 08:28:04 +00:00
Milo Kim
470eca47bd mfd: Add LP3943 MFD driver
LP3943 has 16 output pins which can be used as GPIO expander and PWM generator.

* Regmap I2C interface for R/W LP3943 registers

* Atomic operations for output pin assignment
  The driver should check whether requested pin is available or not.
  If the pin is already used, pin request returns as a failure.
  A driver data, 'pin_used' is checked when gpio_request() and
  pwm_request() are called. If the pin is available, then pin_used is set.
  And it is cleared when gpio_free() and pwm_free().

* Device tree support
  Compatible strings for GPIO and PWM driver.
  LP3943 platform data is PWM related, so parsing the device tree is
  implemented in the PWM driver.

Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21 08:27:59 +00:00
Chanwoo Choi
3008ddbe06 mfd: max14577: Add max14577 MFD driver core
This patch adds max14577 core/irq driver to support MUIC(Micro USB IC)
device and charger device and support irq domain method to control
internal interrupt of max14577 device. Also, this patch supports DT
binding with max14577_i2c_parse_dt().

The MAXIM 14577 chip contains Micro-USB Interface Circuit and Li+ Battery
Charger. It contains accessory and USB charger detection logic. It supports
USB 2.0 Hi-Speed, UART and stereo audio signals over Micro-USB connector.

The battery charger is compliant with the USB Battery Charging Specification
Revision 1.1. It has also SFOUT LDO output for powering USB devices.

Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21 08:13:36 +00:00
Michal Marek
72ac01274a mfd: Make MFD_AS3722 depend on I2C=y
MFD_AS3722 can only be builtin, so it needs I2C builtin as well.
With I2C=m, we get:

drivers/mfd/as3722.c:372: undefined reference to `devm_regmap_init_i2c'
drivers/built-in.o: In function `as3722_i2c_driver_init':
drivers/mfd/as3722.c:444: undefined reference to `i2c_register_driver'
drivers/built-in.o: In function `as3722_i2c_driver_exit':
drivers/mfd/as3722.c:444: undefined reference to `i2c_del_driver'

Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-11-26 09:12:19 +00:00
Linus Torvalds
9073e1a804 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual earth-shaking, news-breaking, rocket science pile from
  trivial.git"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
  doc: usb: Fix typo in Documentation/usb/gadget_configs.txt
  doc: add missing files to timers/00-INDEX
  timekeeping: Fix some trivial typos in comments
  mm: Fix some trivial typos in comments
  irq: Fix some trivial typos in comments
  NUMA: fix typos in Kconfig help text
  mm: update 00-INDEX
  doc: Documentation/DMA-attributes.txt fix typo
  DRM: comment: `halve' -> `half'
  Docs: Kconfig: `devlopers' -> `developers'
  doc: typo on word accounting in kprobes.c in mutliple architectures
  treewide: fix "usefull" typo
  treewide: fix "distingush" typo
  mm/Kconfig: Grammar s/an/a/
  kexec: Typo s/the/then/
  Documentation/kvm: Update cpuid documentation for steal time and pv eoi
  treewide: Fix common typo in "identify"
  __page_to_pfn: Fix typo in comment
  Correct some typos for word frequency
  clk: fixed-factor: Fix a trivial typo
  ...
2013-11-15 16:47:22 -08:00
Laxman Dewangan
d460a6f3d6 mfd: Add support for ams AS3722 PMIC
The ams AS3722 is a compact system PMU suitable for mobile phones,
tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
controller, 11 LDOs, RTC, automatic battery, temperature and
over-current monitoring, 8 GPIOs, ADC and a watchdog.

Add MFD core driver for the AS3722 to support core functionality.

Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-10-23 16:22:33 +01:00
Linus Walleij
60013b94d9 mfd: Add STw481x driver
This adds a driver for the STw481x PMICs found in the Nomadik
family of platforms. This one uses pure device tree probing.
Print some of the OTP registers on boot and register a regulator
MFD child.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-10-23 16:21:12 +01:00
Masanari Iida
8c88126bbb treewide: Fix typo in Kconfig
Correct spelling typo in Kconfig.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-14 15:23:02 +02:00
Martin Schwidefsky
0244ad004a Remove GENERIC_HARDIRQ config option
After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-13 15:09:52 +02:00
Krystian Garbaciak
8e685483b0 mfd: da9063: Add Dialog DA9063 core driver
This is MFD module providing access to registers and interrupts of DA906x
series PMIC. It is used by other functional modules, registered as MFD cells.
Driver uses regmap with paging to access extended register list. Register map
is divided into two pages, where the second page is used during initialisation.

This module provides support to following functional cells:
 - Regulators
 - RTC
 - HWMON
 - OnKey (power key misc input device)
 - Vibration (force-feedback input device)
 - Watchdog
 - LEDs

Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-20 03:15:52 +02:00
Mark Brown
ca16ecbccb mfd: wm8997: Make Kconfig prompt for WM8997 more consistent
The Kconfig prompt for WM8997 says "Support for..." while the other MFD
Kconfigs (including the adjacent ones for other Arizona devices) just
list the device name which sticks out like a sore thumb when doing
configuration.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31 02:04:18 +02:00
Tomasz Figa
443c6ae253 mfd: max8998: Add irq domain support
This patch adds irq domain support for max8998 interrupts.

To keep both non-DT and DT worlds happy, simple domain is used, which is
linear when no explicit IRQ base is specified and legacy, with static
mapping, otherwise.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-30 23:29:44 +02:00