Commit Graph

132697 Commits

Author SHA1 Message Date
Abhijeet Kolekar
e9dde6f6ed iwl3945: use iwl_mac_hw_scan callback
3945 can use iwl_mac_hw_scan callback instead of
iwl3945_mac_hw_scan callback.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Acked-by: Samuel Ortiz <samuel.ortiz@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:45 -05:00
Abhijeet Kolekar
cade0eb2c7 iwl3945: use iwl_rx_scan handlers
Patch makes use of iwl_rx_scan handler for 3945.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Acked-by: Samuel Ortiz <samuel.ortiz@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:45 -05:00
Jason Andryuk
2ce4f9d861 at76c50x-usb: convert at76_debug to an unsigned int
at76_debug should be an unsigned int as it used as a bit field.  In
fact, modprobe fails when trying to set at76_debug's high bit.

Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:44 -05:00
Jason Andryuk
19e8bc7fa7 at76c50x-usb: update to latest mac80211 hw scan api
With the latest mac80211 stack, the driver needs to be updated for
cfg80211 scanning.  I based the changes off of modifications for
at76_usb found here:

http://johannes.sipsolutions.net/patches/old/all/2008-09-19-13:35/020-cfg80211-scan.patch

The trick was that max_signal also needs to be set to avoid a divide
by zero Oops.  I just guessed and used the value 100 for now.

kvalo: handpicked the change from two different patches

Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:44 -05:00
Kalle Valo
1264b95146 at76c50x-usb: add driver
This is a driver for usb devices based on at76c50x chipset. This is
a mac80211 port of the original at76_usb driver.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:44 -05:00
John W. Linville
41d2f291d7 iwlagn: default to MAX_UCODE_BEACON_INTERVAL in iwl_adjust_beacon_interval
Default to MAX_UCODE_BEACON_INTERVAL if the output of
iwl_adjust_beacon_interval would otherwise be zero.  This prevents a
division by zero on my iwl5300-equipped Lenovo T400 with kernels that
include "mac80211: use cfg80211s BSS infrastructure".

This patch is a bit of a hack -- I'm not sure why iwl_setup_rxon_timing
is giving iwl_adjust_beacon_interval a zero input (which is the only way
it would output zero).  I would be happy to have a better fix.  But for
now, this makes my box boot...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:44 -05:00
Roel Kluin
c493b017e0 b43: Fix LO calibration txctl reg value
This patch expands the parenthesis in the txctl reg write
of the LO calibration to enforce precedence rules.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:43 -05:00
Roel Kluin
e05eac3794 p54: misplaced parentheses
Only FIF_FCSFAIL is set due to parentheses

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:43 -05:00
Dan Williams
c3d72b9681 ipw2x00: age scan results on resume
Scanned BSS entries are timestamped with jiffies, which doesn't
increment across suspend and hibernate.  On resume, every BSS in the
scan list looks like it was scanned within the last 10 seconds,
irregardless of how long the machine was actually asleep.  Age scan
results on resume with the time spent during sleep so userspace has a
clue how old they really are.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:43 -05:00
John W. Linville
bc8263f1d8 airo: correct improper initialization of local variable
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:42 -05:00
Johannes Berg
4aa188e1a8 mac80211/cfg80211: move iwrange handler to cfg80211
The previous patch made cfg80211 generally aware of the signal
type a given hardware will give, so now it can implement
SIOCGIWRANGE itself, removing more wext stuff from mac80211.
Might need to be a little more parametrized once we have
more hardware using cfg80211 and new hardware capabilities.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:42 -05:00
Johannes Berg
77965c970d cfg80211: clean up signal type
It wasn't a good idea to make the signal type a per-BSS option,
although then it is closer to the actual value. Move it to be
a per-wiphy setting, update mac80211 to match.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:42 -05:00
Johannes Berg
630e64c487 nl80211: remove admin requirement from station get
There's no particular reason to not let untrusted users see
this information -- it's just the stations we're talking to,
packet counters for them and possibly some mesh things.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:41 -05:00
Johannes Berg
0a16ec5f5e mac80211: add missing kernel-doc
Document the new shutdown member.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:41 -05:00
Vasanthakumar Thiagarajan
d5c232ff9b ath9k: Fix PTK/GTK handshake timeout
Some APs don't start BA negotiation with the client before it is done
with the key handshake in WPA/RSN. With those APs, key handshake times
out if EAPOL frames are sent after addba request. So defer the BA negotiation
until we are done with tx/rx of all EAPOL frames.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:41 -05:00
Johannes Berg
a77b855245 cfg80211/mac80211: fill qual.qual value/adjust max_qual.qual
Due to various bugs in the software stack we end up having
to fill qual.qual; level should be used, but wpa_supplicant
doesn't properly ignore qual.qual, NM should use qual.level
regardless of that because qual.qual is 0 but doesn't handle
IW_QUAL_DBM right now.

So fill qual.qual with the qual.level value clamped to
-110..-40 dBm or just the regular 'unspecified' signal level.
This requires a mac80211 change to properly announce the
max_qual.qual and avg_qual.qual values.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:40 -05:00
Dan Williams
cb3a8eec0e cfg80211: age scan results on resume
Scanned BSS entries are timestamped with jiffies, which doesn't
increment across suspend and hibernate.  On resume, every BSS in the
scan list looks like it was scanned within the last 10 seconds,
irregardless of how long the machine was actually asleep.  Age scan
results on resume with the time spent during sleep so userspace has a
clue how old they really are.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:40 -05:00
Ivo van Doorn
abd2fdb4c6 rt2x00: Fix RF offset
The word_base is in bytes instead of word index number,
this means that when using it, it should be transformed into
a word index first.

Otherwise RF register reading will fail through debugfs since
we would start reading 4 words starting with word 4 (which is the last
valid word for RF).

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:40 -05:00
Jouni Malinen
98c8a60a04 nl80211: Provide access to STA TX/RX packet counters
The TX/RX packet counters are needed to fill in RADIUS Accounting
attributes Acct-Output-Packets and Acct-Input-Packets. We already
collect the needed information, but only the TX/RX bytes were
previously exposed through nl80211. Allow applications to fetch the
packet counters, too, to provide more complete support for accounting.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:39 -05:00
Sujith
fdbf7335ea ath9k: Use beacon interval directly
Setting up the CAB queue requires only the beacon interval,
remove the function ath_get_beaconconfig() which is redundant.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:39 -05:00
Sujith
f7a99e46be ath9k: Remove ath_txq_depth and get the queue depth directly
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:39 -05:00
Sujith
f34639d323 ath9k: Remove a few unused capability macros
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:39 -05:00
Sujith
171387ef0a ath9k: Initialize channel change time
Set channel change time to 5ms, this will improve scan results.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:38 -05:00
Jouni Malinen
70692ad292 nl80211: Optional IEs into scan request
This extends the NL80211_CMD_TRIGGER_SCAN command to allow applications
to specify a set of information element(s) to be added into Probe
Request frames with NL80211_ATTR_IE. This provides support for the
MLME-SCAN.request primitive parameter VendorSpecificInfo and can be
used, e.g., to implement WPS scanning.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:38 -05:00
Sujith
83befbde83 ath9k: Fix antenna assignment bug in TX status processing
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:38 -05:00
Sujith
0caa7b14f3 ath9k: Fix HW wait timeout
RX and calibration have different timeout requirements.
This patch fixes it by changing the HW wait routine
to accept a timeout value.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:37 -05:00
Sujith
70768496db ath9k: Program the RTC registers correctly
This patch programs the RTC registers of AR9100 chipsets
correctly during chip reset.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:37 -05:00
Bob Copeland
362695e11a ath5k: compute rts/cts duration after computing full pktlen
RTS and CTS-to-self duration needs to go after ICV len is considered.

Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:37 -05:00
Bob Copeland
acf3c1a592 ath5k: move beacon processing to a tasklet
We currently send beacons directly from the interrupt routine.  This
can hold up interrupt processing in beaconing modes and makes the
ISR somewhat more complex.  Move it to a tasklet like rx and tx.

Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:37 -05:00
Bob Copeland
b5f03956c5 ath5k: use spin_lock_irqsave for beacon lock
ath5k_reset can be called from process context, which in turn can
call ath5k_beacon_config which takes the sc->block spinlock.  Since
it can also be taken in hard irq context, use spin_lock_irqsave
everywhere.  This fixes a potential deadlock in adhoc mode.

Changes-licensed-under: 3-Clause-BSD

Cc: stable@kernel.org
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:36 -05:00
Bob Copeland
0b6f582bd3 ath5k: don't mask off interrupt bits
Since interrupts are already masked by the hardware, there's no need to
discard interrupt bits in the ISR itself.  Also, in ath5k_beacon_config
we mask off a couple of bits without locking, so doing this mask in
software can lead to unhandled beacon timer and beacon miss interrupts.

Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:36 -05:00
Ivo van Doorn
144d9ad98e rt2x00: Add various new USB IDs for rt73usb
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:36 -05:00
Ivo van Doorn
53bc647a1a rt2x00: Remove check for rf word 0
The only way rf_write() can be called with word 0 is
when the user sends the wrong word index through debugfs.
However the values which are send through debugfs are
validated using the RF_BASE and RF_SIZE macro values,
the most logical solution is to increase RF_BASE with 4
and decrease RF_SIZE with 4 (RF_SIZE has always been
1 word too big)

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:35 -05:00
Ivo van Doorn
62750f421f rt2x00: uncomment get_tsf
The atomic requirement for get_tsf() has been removed
by mac80211. This means the USB drivers can add support
for the callback function again.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:35 -05:00
Randy Dunlap
13e967b292 wireless: fix for CONFIG_NL80211=n
Add empty function for case of CONFIG_NL80211=n:

net/wireless/scan.c:35: error: implicit declaration of function 'nl80211_send_scan_aborted'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:35 -05:00
Reinette Chatre
80bc53931b iwlwifi: Fix and rework Kconfig file
Fixes:
- iwlwifi is an optional driver and should thus not default to 'y'.
- 3945 now depends on IWLCORE.

Rework:
- There is not a case when IWLCORE should not be selected. At the same time
  the driver does not use IWLWIFI or IWLCORE. We can just merge the usage of
  these two. With IWLWIFI being the driver name we proceed to use just it and
  replace instances of IWLCORE with it. The module name does not change
  and is still iwlcore.
- Both IWLAGN and IWL3945 are selecting FW_LOADER, we can thus just move
  this up to one select when IWLWIFI is selected.
- IWL5000 now supports Intel Wireless Wifi 100, 6000, and 6050 series.
- Now that 3945 depends on IWLWIFI we can also indicate its dependency on
  MAC80211_LEDS and LEDS_CLASS at this level.
- IWLAGN_LEDS is not used by driver - remove it.
- IWLAGN_SPECTRUM_MEASUREMENT actually depends on IWLWIFI as it forms part
  of iwlcore module. Move this config up in Kconfig to reflect that and also
  change name to IWLWIFI_SPECTRUM_MEASUREMENT.
- CONFIG_IWLWIFI_RFKILL is used by iwlagn as well as iwl3945, add text to
  description that indicates this.
- CONFIG_IWL3945_RFKILL does not exist - remove usage from driver.
- Add "iwlagn" to end of description of IWLAGN to help people understand
  what iwlagn means in rest of Kconfig text.
- Add "iwl3945" to end of description of IWL3945 to help people understand
  what iwlagn means in rest of Kconfig text.
- Change IWLWIFI_DEBUGFS description to indicate that only iwlagn supports
  it (for now).

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:35 -05:00
Reinette Chatre
d21050c7be iwlwifi: use singlethread workqueue
Use one workqueue instead of one per CPU.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:34 -05:00
Wu, Fengguang
daf518dee6 iwlwifi: report correct and detailed values about requested txpower
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:34 -05:00
Jiri Slaby
1788bcd155 ipw2200, fix ipw io functions
- some of them are defined as follows:
  #define ipw_write32	expr1; expr2
  and are called from loops or ifs without a compound statement, so
  they are broken. Fix it by putting them into do {} while (0) for
  writes and ({ }) for reads.
- also unify and cleanup them while at it -- convert them from
  macros to inline functions, so that we get some basic typechecking

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Zhu Yi <yi.zhu@intel.com>
Cc: James Ketrenos <jketreno@linux.intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:34 -05:00
Bob Copeland
191a99b748 ath9k: move common regulatory code out of if() branches
Both branches of the regulatory check in ath_attach() set up a
custom regulatory domain and apply radar and world flags, so extract
those into a single path.

While at it, fix a couple of spelling errors and an unnecessary extra
pointer traversal.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:33 -05:00
Bob Copeland
65fe4656b7 ath9k: remove prototype for ath9k_regd_get_current_country
ath9k_regd_get_current_country() doesn't exist.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:47 -05:00
Bob Copeland
17580f6ab1 ath9k: remove ath9k_regd_get_rd()
The function ath9k_regd_get_rd() is unused.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:47 -05:00
Bob Copeland
d0f48f9d1f ath9k: convert isWwrSKU macro into C code
Write isWwrSKU as an inline function and nix the camel-case to make
the routine slightly clearer.  Change its argument to take the regd
value directly so it can eventually be used by ath5k as well.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:47 -05:00
Bob Copeland
e775aaf07a ath9k: save a few calls to ath9k_regd_get_eepromRD
Since we already have a stack variable to track the eeprom regd,
we can grab it up front it and save three calls to fetch it again.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:47 -05:00
Bob Copeland
63a7c8e254 ath9k: remove write-only current_rd_inuse
The current_rd_inuse regulatory value is assigned but not used anywhere.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:46 -05:00
Helmut Schaa
795cc0ad54 iwlagn: clean up error path in iwl_pci_probe
This avoids triggering a BUG_ON in pci_disable_msi in the error path.
Furthermore remove the first call to pci_disable_device as it is already
called at out_pci_disable_device.

Both issues were introduced in the patch "iwlagn: fix hw-rfkill while
the interface is down".

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:46 -05:00
Senthil Balasubramanian
8bd1d07f93 ath9k: Add open loop control support
This patch adds Open Loop Control support for Atheros chipsets that
supports open loop power control.

Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:46 -05:00
Sujith
81cb7623ad mac80211: Extend the rate control API with an update callback
The AP can switch dynamically between 20/40 Mhz channel width,
in which case we switch the local operating channel, but the
rate control algorithm is not notified. This patch adds a new callback
to indicate such changes to the RC algorithm.

Currently, HT channel width change is notified, but this callback
can be used to indicate any new requirements that might come up later on.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:45 -05:00
Sujith
b06e786d4c ath9k: Decrease minimum NF threshold
The existing value was too conservative, causing
the history buffer not to be updated.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:45 -05:00
Sujith
668158af48 ath9k: Fix incorrect noise floor reading for 4k EEPROM
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:44 -05:00