Commit Graph

1191 Commits

Author SHA1 Message Date
Akinobu Mita
3869007812 V4L/DVB (7077): bt878: remove handcrafted PCI subsystem ID check
This patch moves the subsystem ID and subsystem vendor ID check from probing
function to the PCI generic function by describing subsystem IDs in
pci_device_id table. This enables to add new PCI IDs to a device driver pci_ids
table at runtime by new_id file in sysfs pci driver tree.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:22 -02:00
Patrick Boettcher
4a2b108379 V4L/DVB (7075): Make a local function static
Make a local function static

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:20 -02:00
Patrick Boettcher
904a82e3e2 V4L/DVB (7074): DiB7000P: correct tuning problem for 7MHz channel
Tuning problem for 7Mhz channels fixes

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:20 -02:00
Patrick Boettcher
3cb2c39ded V4L/DVB (7073): DiB7070: Reception quality improved
Removing two bugs to improve sensitivity for DiB7070 and Dib7000P with MT2266.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:19 -02:00
Olivier DANET
c52344fdc4 V4L/DVB (7072): sets the MT2060 IF1 frequency according to EEPROM
Here is a patch for Hauppage Nova-T-Stick and Nova-T-500 users.  It
sets the MT2060 IF1 frequency according to the calibration values
stored in the EEPROM.

It is supposed to enhance the signal quality, but, hey, there is no
guarantee.  Feedbacks would be much appreciated, to know whether it
deserves being applied.

Signed-off-by: Olivier DANET <odanet at caramail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:19 -02:00
Patrick Boettcher
a162abb06b V4L/DVB (7071): DiB0700: Start streaming the right way
There was a mistake in the way how to start the streaming in the dib0700. This patch fixes that.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:18 -02:00
Soeren Moch
853ea132c7 V4L/DVB (7070): Fix some tuning problems
The attached patch solves all my vdr tuning problems on a dib7000p
nova-t stick as far as I could check within the last weekend.

It disables streaming while tuning, like that the number of faulty TS
packets is reduced.

Signed-off-by: Soeren Moch <Soeren.Moch@stud.uni-hannover.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:17 -02:00
Darren Salt
13b83b5d51 V4L/DVB (7069): Support for myTV.t
Here's a roll-up which provides support for both this and the myTV.t.

Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:17 -02:00
Tim Taubert
c7637b1a31 V4L/DVB (7068): Add support for WinTV Nova-T-CE driver
Add support for WinTV Nova-T-CE driver

Signed-off-by: Tim Taubert <ttmails@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:16 -02:00
Jose Alberto Reguero
3a0311c6c5 V4L/DVB (7067): fix autoserach in the Hauppauge NOVA-T 500
This patch fix autoserach in the Hauppauge NOVA-T 500.

Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:15 -02:00
Daniel Gimpelevich
132c318843 V4L/DVB (7066): ASUS My Cinema U3000 Mini DVBT Tuner
Adding support for ASUS My Cinema U3000 Mini DVBT Tuner

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:15 -02:00
Yousef Lamlum
7999a8161d V4L/DVB (7065): Artec T14BR patches
Added Artec T14BR support

Signed-off-by: Yousef Lamlum <yousef@youseflamlum.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:15 -02:00
Steven Toth
5ea60531c1 V4L/DVB (7063): xc5000: Fix OOPS caused by missing firmware
xc5000: Fix OOPS caused by missing firmware.

Signed-off-by: Chaogui Zhang <czhang1974@gmail.com>
Acked-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:14 -02:00
Luca Olivetti
8cb9329309 V4L/DVB (7054): ansonic branded dvb-t usb stick support in the af9005 driver
Marcos Melero (marcosmelero at gmail.com) reported he could make
his dvb-t usb stick work with the af9005 driver by changing the device
ids (10b9:6000).

The stick is branded "Ansonic" (one of the brands of a spanish chain of
supermarkets) with no other identification of the model.
Since neither Marcos nor me know the OEM for the stick, in the attached
patch I used Ansonic for the ids/description.

Signed-off-by: Luca Olivetti <luca@ventoso.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:10 -02:00
Michael Krufky
ed73683f06 V4L/DVB (7052): tda18271: when tuning digital, the analog demod must be tri-stated
Call analog_ops.standby during tda18271_set_params, to put the tda8295
in tri-state when tuning digital channels.  Otherwise the tda8295 will
interfere with the signal coming from the tda18271 into the digital
demodulator.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:09 -02:00
Mauro Carvalho Chehab
3473e342d7 V4L/DVB (7051): Cleans up error handling on or51xxx_attach
state is already NULL.

Reviewed-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:09 -02:00
Steven Toth
4917019d19 V4L/DVB (7046): Finalise support for the Pinnacle HD 8000i
Correctly set the atatch structures, enable IR, configure the
xc5000 tuner includes.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:08 -02:00
Steven Toth
73c993a829 V4L/DVB (7045): xc5000: Small amount of cleanup and commenting
xc5000: Small amount of cleanup and commenting, just for clarification.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:07 -02:00
Steven Toth
27c685a4b0 V4L/DVB (7042): xc5000: Tuner analog support
From Zhang: This an updated patch that adds analog support for
the xc5000 tuner driver. it was tested on a Pinnacle PCTV HD 800i
card (patches to follow).

Patch commited as-is, cleanup to follow ... Steve.

Signed-off-by: Chaogui Zhang <czhang1974@gmail.com>
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:05 -02:00
Steven Toth
dfc1c08aab V4L/DVB (7041): s5h1409: Bug fix for parallel support
Parallel support was not working with the s5h1409 and the Pinnacle HD800i.
This patch fixes the demodulator driver and ensures that all existing
s5h1409 based products configure the demodulator correctly.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:05 -02:00
Michael Krufky
bc835d80d9 V4L/DVB (7032): tda18271: tda18271_cal_on_startup should be declared static
This module option variable is only handled within the file tda18271-fe.c -

Declare this variable as static.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:01 -02:00
Michael Krufky
0f96251e7b V4L/DVB (7029): tda18271: provide a choice whether to perform rf cal on init or on first tune
If module option "cal" is set to 1, the ~22 sec rf tracking filter calibration
sequence will be invoked on startup.  Otherwise, the calibration will take
place during the first tune.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:05:00 -02:00
Michael Krufky
839c6c96d0 V4L/DVB (7028): tda18271: test RF_CAL_OK to see if we need additional RF calibration
Test RF_CAL_OK to see if we need to perform the RF tracking filter
calibration after returning from standby.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:59 -02:00
Michael Krufky
518d87399b V4L/DVB (7027): tda18271: put the device in standby mode during sleep()
Add function, tda18271_set_standby_mode.

During sleep, enter standby mode with slave tuner output enabled,
loop through on and xtal oscillator on.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:58 -02:00
Michael Krufky
6bfa665724 V4L/DVB (7026): tda18271: report when the RF tracking filter calibration has completed
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:58 -02:00
Steven Toth
a57ed8a1f7 V4L/DVB (7008): s5h1409: Ensure the silicon is initialized during attach
If not it impacts on analog tuner quality.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:50 -02:00
Michael Krufky
cf04d29c48 V4L/DVB (6988): tda18271: give calibration debug a separate debug mask
We don't usually want to see the calibration debug messages, but sometimes
it is useful.  Assign it to a separate debug mask.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:44 -02:00
Michael Krufky
c353f42f75 V4L/DVB (6987): tda18271: add support for fm radio
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:44 -02:00
Michael Krufky
a4f263b587 V4L/DVB (6986): tda18271: share state between analog and digital tuner instances
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:43 -02:00
Michael Krufky
8d316bf54b V4L/DVB (6979): tda18271: use a mutex to protect state in critical sections
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:43 -02:00
Michael Krufky
ccbac9bb17 V4L/DVB (6978): tda18271: store frequency and bandwidth after successful tune
Store last tuned frequency & bandwidth after successful tune.

Clean up tune functions -- remove pointer to tune function in
state structure, instead call tune function based on priv->id.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:42 -02:00
Michael Krufky
09f83c4fc0 V4L/DVB (6977): tda18271: clean up calibration initialization procedures
Always initialize registers during attach.

Perform IR Calibration during init if needed.
Perform RF Calibration during init if needed for C2, only.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:41 -02:00
Michael Krufky
d2c932a1f7 V4L/DVB (6965): tda18271: fix analog tuning regression caused by earlier changeset
An earlier patch, "tda18271: fail table lookups if frequency is out of range"
broke analog support on certain hardware.  This patch fixes that problem, by
allowing the RF_CAL byte to be set to the maximum value, in cases of the
frequency being out of range.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:38 -02:00
Michael Krufky
0e1fab90a8 V4L/DVB (6964): tda18271: document debug level and configuration parameters
Document debug level module options and
tda18271_config attach-time parameters.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:38 -02:00
Michael Krufky
2ba65d517b V4L/DVB (6963): tda18271: store IF frequency in a u16 instead of u32
Store IF Frequency in a u16 instead of a u32.  Multiply by 1000 before use.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:37 -02:00
Michael Krufky
f21e0d7f05 V4L/DVB (6962): tda18271: allow device-specific configuration of IF frequency and std bits
Allow drivers to pass device-specific configuration parameters during attach.

If these parameters are omitted, default values will be used.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:36 -02:00
Michael Krufky
59067f7ed4 V4L/DVB (6961): tda18271: move common code to tda18271-common.c
Move some common code to a new file to make this easier to look at.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:36 -02:00
Michael Krufky
255b5113b4 V4L/DVB (6960): tda18271: add support for NXP TDA18271HD/C2
Tested successfully with QAM256 digital cable.
Analog television is limping, needs more work.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:35 -02:00
Michael Krufky
dec9ccceef V4L/DVB (6959): tda18271: add MODULE_VERSION
version 0.1

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:35 -02:00
Michael Krufky
95af8a26cb V4L/DVB (6958): tda18271: clean up function tda18271_set_analog_params
make set_analog_params function look consistent with set_params function

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:34 -02:00
Michael Krufky
33f25b4275 V4L/DVB (6957): tda18271: fail table lookups if frequency is out of range
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:34 -02:00
Steven Toth
71bc9bd96b V4L/DVB (6930): xc5000: Removed erroneous defines
Basic cleanup.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:26 -02:00
Michael Krufky
b92bf0f6a9 V4L/DVB (6928): tda18271: break calculation functions out of tda18271_tune
Break out the following new functions from tda18271_tune:

tda18271_calc_bp_filter
tda18271_calc_km
tda18271_calc_rf_band
tda18271_calc_gain_taper
tda18271_calc_ir_measure
tda18271_calc_rf_cal

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:26 -02:00
Michael Krufky
182519f4c9 V4L/DVB (6927): tda18271: improve printk macros
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:25 -02:00
Michael Krufky
2f27dfc98c V4L/DVB (6926): tda18271: consolidate table lookup functions
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:25 -02:00
Michael Krufky
d37142102a V4L/DVB (6925): tda18271: move state structures to tda18271-priv.h
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:25 -02:00
Michael Krufky
7686b574a1 V4L/DVB (6924): tda18271: fix whitespace in tda18271_ir_measure
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:24 -02:00
Michael Krufky
926bf3ca93 V4L/DVB (6923): tda18271: remove extraneous debug
We don't need to do a dbg_info during tda18271_attach anymore, since
the tda18271_get_id function will call dbg_info with the same information
and more.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:24 -02:00
Michael Krufky
fe0bf6d783 V4L/DVB (6907): tda18271: create separate calc_pll functions
Consolidate duplicated code by creating functions:

tda18271_calc_main_pll
tda18271_calc_cal_pll

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:19 -02:00
Michael Krufky
f0bd504fb9 V4L/DVB (6906): tda18271: rename tda18271_calc_* functions to tda18271_lookup_*
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:19 -02:00