Commit Graph

42596 Commits

Author SHA1 Message Date
Linus Torvalds
e80b135985 Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: x86: Add support for the ANY bit
  perf: Change the is_software_event() definition
  perf: Honour event state for aux stream data
  perf: Fix perf_event_do_pending() fallback callsite
  perf kmem: Print usage help for unknown commands
  perf kmem: Increase "Hit" column length
  hw-breakpoints, perf: Fix broken mmiotrace due to dr6 by reference change
  perf timechart: Use tid not pid for COMM change
2010-01-21 08:50:04 -08:00
Linus Torvalds
dedd0c2a48 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (23 commits)
  ACPI: delete acpi_processor_power_verify_c2()
  ACPI: allow C3 > 1000usec
  ACPI: enable C2 and Turbo-mode on Nehalem notebooks on A/C
  ACPI: power_meter: remove double kfree()
  ACPI: processor: restrict early _PDC to opt-in platforms
  ACPI: Fix unused variable warning in sbs.c
  acpi: make ACPI device id constant
  sony-laptop - fix using of uninitialized variable
  ACPI: Fix section mismatch error for acpi_early_processor_set_pdc()
  eeepc-laptop: disable wireless hotplug for 1201N
  eeepc-laptop: add hotplug_disable parameter
  eeepc-laptop: switch to using sparse keymap library
  eeepc-laptop: dmi blacklist to disable pci hotplug code
  eeepc-laptop: disable cpu speed control on EeePC 701
  ACPI: don't cond_resched if irq is disabled
  ACPI: Remove unnecessary cast.
  ACPI: Advertise to BIOS in _OSC: _OST on _PPC changes
  ACPI: EC: Add wait for irq storm
  ACPI: SBS: Move SBS HC callback to faster Notify queue
  x86, ACPI: delete acpi_boot_table_init() return value
  ...
2010-01-21 07:29:36 -08:00
Linus Torvalds
970114a1da Merge branch 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh64: wire up sys_accept4.
  sh: unwire sys_recvmmsg.
  sh: ms7724: Correct sh-eth EEPROM polling timeout.
2010-01-21 07:16:27 -08:00
Linus Torvalds
def2052922 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 and V7 comments
  ARM: 5886/1: arm: Fix cpu_proc_fin() for proc-v7.S and make kexec work
  ARM: 5885/1: arm: Flush TLB entries in setup_mm_for_reboot()
  ARM: 5884/1: arm: Fix DCC console for v7
  ARM: 5883/1: Revert "disable NX support for OABI-supporting kernels"
  ARM: 5882/1: ARM: Fix uncompress code compile for different defines of flush(void)
  ARM: fix badly placed mach/plat entries in Kconfig & Makefile
2010-01-21 07:15:10 -08:00
Stephane Eranian
b27d515a49 perf: x86: Add support for the ANY bit
Propagate the ANY bit into the fixed counter config for v3 and higher.

Signed-off-by: Stephane Eranian <eranian@google.com>
[a.p.zijlstra@chello.nl: split from larger patch]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4b5430c6.0f975e0a.1bf9.ffff85fe@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-21 13:40:41 +01:00
Len Brown
be6066f34c Merge branch 'misc' into release 2010-01-20 01:23:27 -05:00
Tony Lindgren
2045124ffd ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 and V7 comments
The comments in cacheflush.h should follow what's in
struct cpu_cache_fns. The comments for V6 and V7 are
unnecessary.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-19 23:11:56 +00:00
Tony Lindgren
1f667c690b ARM: 5886/1: arm: Fix cpu_proc_fin() for proc-v7.S and make kexec work
The comments in arm_machine_restart() suggest that cpu_proc_fin()
will clean and disable cache and turn off interrupts. This does
not seem to be implemented for proc-v7.S, implement it the same
way as for proc-v6.S.

This also makes kexec work for v7. Note that a related TLB and
branch traget flush patch is also needed to avoid kexec
"crc error".

Note that there are still some issues that seem to be related
to L2 cache being on and causing occasional uncompress "crc error"
with kexec. Anyways, this gets kexec mostly working on V7 for now.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-19 20:23:17 +00:00
Tony Lindgren
ad3e6c0b1f ARM: 5885/1: arm: Flush TLB entries in setup_mm_for_reboot()
We need to do that if we tinker with the MMU entries.

This fixes the occasional bug with kexec where the new
fails to uncompress with "crc error". Most likely at
least kexec on v6 and v7 need this fix.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-19 20:23:17 +00:00
Tony Lindgren
200b7a8dc0 ARM: 5884/1: arm: Fix DCC console for v7
Without this patch arch/arm/compressed/head.S defaults to generic
DCC code that does not work for v7.

For more information on the v7 DCC, see Cortex-A8 TRM
"12.11.1 Debug communications channel".

To use it with post 2.6.33-rc1 or later, you need to have:

CONFIG_DEBUG_LL=y
ONFIG_DEBUG_ICEDCC=y
CONFIG_EARLY_PRINTK=y

Earlier kernels need commit 93fd03a8c6
backported.

Tested on omap3430.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-19 20:23:16 +00:00
Paul Mundt
79f211b8e1 sh64: wire up sys_accept4.
sh64 on the other hand provides both direct broken out syscalls as well
as socketcall access. As there are binaries that use both socketcall has
to stay around. The current ABI prefers direct syscalls.

It was pointed out that when sys_recvmmsg was added in, sys_accept4 was
overlooked. This takes care of wiring it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 17:00:31 +09:00
Paul Mundt
6eacb2c4cb sh: unwire sys_recvmmsg.
sh32 at the moment only uses sys_socketcall to reach these, so unwire
recvmmsg for now. While we're at it, add it to the ignore list, as per
the s390 change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 17:00:06 +09:00
Suresh Siddha
bb668da6d6 x86, apic: use logical flat for systems with <= 8 logical cpus
We can use logical flat mode if there are <= 8 logical cpu's
(irrespective of physical apic id values).  This will enable simplified
and efficient IPI and device interrupt routing on such platforms.

This has been tested to work on both Intel and AMD platforms.
Exceptions like IBM summit platform which can't use logical flat mode
are addressed by using OEM platform checks.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Chris McDermott <lcm@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-18 14:15:28 -08:00
Suresh Siddha
dfea91d5a7 x86, apic: use physical mode for IBM summit platforms
Chris McDermott from IBM confirmed that hurricane chipset in IBM summit
platforms doesn't support logical flat mode.  Irrespective of the other
things like apic_id's, total number of logical cpu's, Linux kernel
should default to physical mode for this system.

The 32-bit kernel does so using the OEM checks for the IBM summit
platform.  Add a similar OEM platform check for the 64bit kernel too.

Otherwise the linux kernel boot can hang on this platform under certain
bios/platform settings.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Tested-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Chris McDermott <lcm@linux.vnet.ibm.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-18 14:15:27 -08:00
Linus Torvalds
91302873ba Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: pci_controller->arch_data really is a struct device_node *
  microblaze: Add missing double apostrophe in Kconfig
  microblaze: Add PT_ macros for special purpose regs
  microblaze: Enable accept4 syscall
  microblaze: Wire up recvmmsg syscall
2010-01-18 14:12:42 -08:00
Linus Torvalds
8888be69ad Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Move cpu hotplug driver lock from pseries to powerpc
  powerpc: Move /proc/ppc64 to /proc/powerpc update
  powerpc/8xx: Fix user space TLB walk in dcbX fixup
  powerpc: Fix decrementer setup on 1GHz boards
  powerpc/iseries: Initialise on-stack completion
  powerpc/hvc: Driver build breaks with !HVC_CONSOLE
  serial/pmac_zilog: Workaround problem due to interrupt on closed port
  powerpc/macintosh: Make Open Firmware device id constant
  powerpc: Use helpers for rlimits
  powerpc: cpumask_of_node() should handle -1 as a node
  powerpc/pseries: Fix dlpar compile warning without CONFIG_PROC_DEVICETREE
  powerpc/pseries: Fix xics interrupt affinity
  powerpc/swsusp_32: Fix TLB invalidation
  powerpc/8xx: Always pin kernel instruction TLB
  powerpc: 2.6.33 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx
  powerpc: Use scripts/mkuboot.sh instead of 'mkimage'
  powerpc/5200: update defconfigs
2010-01-18 14:08:55 -08:00
Michal Simek
878194c823 microblaze: pci_controller->arch_data really is a struct device_node *
we are follow powerpc change:
44ef339073

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18 16:36:07 +01:00
Michal Simek
296e2603cf microblaze: Add missing double apostrophe in Kconfig
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18 16:35:52 +01:00
Michal Simek
90974cb4cc microblaze: Add PT_ macros for special purpose regs
PT_ macros are used by gdb and strace uses them too.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18 16:35:39 +01:00
Michal Simek
4a3bb9a900 microblaze: Enable accept4 syscall
We had wrong name in unistd.h + I wire up this syscall
in syscall table.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18 16:35:27 +01:00
Michal Simek
ce9c37f131 microblaze: Wire up recvmmsg syscall
Patch a2e2725541 should
contain change in unistd.h too. The same problem
had MIPS.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18 16:35:15 +01:00
Rabin Vincent
a7b2296277 ARM: 5883/1: Revert "disable NX support for OABI-supporting kernels"
This reverts commit 14f0aa3593.

That commit was needed earlier because system call restarting for
OABI (compat) required an executable stack and thus had problems
with NX.  Since ab72b00734 ("ARM: Fix signal restart issues
with NX and OABI compat") has reworked the code to not require an
executable stack anymore, we can re-enable NX support for kernels
with OABI (compat) support.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-18 14:12:11 +00:00
Tony Lindgren
b53e9b5ebd ARM: 5882/1: ARM: Fix uncompress code compile for different defines of flush(void)
Because of the include of the decompress_inflate.c file from
boot/compress/misc.c, there are different flush() defines:

In file included from arch/arm/boot/compressed/misc.c:249:
arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:138:29: error: macro "flush" passed 2 arguments, but takes just 0

Fix this by removing the define of flush() in misc.c for
CONFIG_DEBUG_ICEDCC as it's already defined in mach/uncompress.h,
and that is being included unconditionally.

Also use a static inline function instead of define
for mach-mxc and mach-gemini to avoid similar bug
for those platforms.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-18 12:44:51 +00:00
Kuninori Morimoto
c718aff2e6 sh: ms7724: Correct sh-eth EEPROM polling timeout.
This converts the cpu_relax() to a udelay(1), which fixes up issues with
the EEPROM polling occasionally timing out.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-18 20:47:15 +09:00
Linus Torvalds
7dc9c484a7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  do_add_mount() should sanitize mnt_flags
  CIFS shouldn't make mountpoints shrinkable
  mnt_flags fixes in do_remount()
  attach_recursive_mnt() needs to hold vfsmount_lock over set_mnt_shared()
  may_umount() needs namespace_sem
  Fix configfs leak
  Fix the -ESTALE handling in do_filp_open()
  ecryptfs: Fix refcnt leak on ecryptfs_follow_link() error path
  Fix ACC_MODE() for real
  Unrot uml mconsole a bit
  hppfs: handle ->put_link()
  Kill 9p readlink()
  fix autofs/afs/etc. magic mountpoint breakage
2010-01-17 11:01:16 -08:00
Russell King
95b8f20fd6 ARM: fix badly placed mach/plat entries in Kconfig & Makefile
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-17 17:19:56 +00:00
Luca Barbieri
0bb7a95f54 hw-breakpoints, perf: Fix broken mmiotrace due to dr6 by reference change
Commit 62edab9056 (from June 2009
but merged in 2.6.33) changes notify_die to pass dr6 by
reference.

However, it forgets to fix the check for DR_STEP in kmmio.c,
breaking mmiotrace. It also passes a wrong value to the post
handler.

This simple fix makes mmiotrace work again.

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
Acked-by: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1263634770-14578-1-git-send-email-luca@luca-barbieri.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-17 08:01:44 +01:00
Linus Torvalds
330a518a1a Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, uv: Ensure hub revision set for all ACPI modes.
  x86, uv: Add function retrieving node controller revision number
  x86: xen: 64-bit kernel RPL should be 0
  x86: kernel_thread() -- initialize SS to a known state
  x86/agp: Fix agp_amd64_init and agp_amd64_cleanup
  x86: SGI UV: Fix mapping of MMIO registers
  x86: mce.h: Fix warning in header checks
2010-01-16 12:31:42 -08:00
Linus Torvalds
c6a93d330b Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Check if /dev/null can be used as the -o gcc argument
  perf tools: Move QUIET_STDERR def to before first use
  perf: Stop stack frame walking off kernel addresses boundaries
2010-01-16 12:27:47 -08:00
john stultz
355e8e8d1b m68knommu: fix invalid flags on coldfire pit clocksource
The m68knommu coldfire pit clocksource looks like it was incorrectly
marked as a continuous clocksource.  Running with it marked as a
continuous clocksource could cause hangs when the system switches to
highres mode or enables nohz.

This patch removes the CLOCK_SOURCE_IS_CONTINUOUS flag on the coldfire pit
clocksource.  This will disallow systems using this clocksource from
entering oneshot mode (disabling highres timers and nohz).

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Cc: Steven King <sfking@fdwdc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16 12:15:38 -08:00
Linus Torvalds
9ddabb6700 Merge branch 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux
* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux:
  ARM: MINI2440: Fixup __initdata usage
  ARM: MINI2440: Fix crash on boot due to improper __initdata qualifier
  ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulator
  ARM: S3C: NAND: Check the existence of nr_map before copying
2010-01-15 14:53:24 -08:00
Linus Torvalds
3b3ef30833 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sentelic - fix left/right horizontal scroll mapping
  Input: pmouse - move Sentelic probe down the list
  Input: add compat support for sysfs and /proc capabilities output
  Input: i8042 - add Dritek quirk for Acer Aspire 5610.
  Input: xbox - do not use GFP_KERNEL under spinlock
  Input: psmouse - fix Synaptics detection when protocol is disabled
  Input: bcm5974 - report ABS_MT events
  Input: davinci_keyscan - add device_enable method to platform data
  Input: evdev - be less aggressive about sending SIGIO notifies
  Input: atkbd - fix canceling event_work in disconnect
  Input: serio - fix potential deadlock when unbinding drivers
  Input: gf2k - fix &&/|| confusion in gf2k_connect()
2010-01-15 14:51:57 -08:00
Linus Torvalds
9fc819172a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: cpumask_of_node() should handle -1 as a node
  alpha: add myself as a maintainer, and drop mention of 2.4
2010-01-15 14:51:39 -08:00
Russ Anderson
1d2c867c94 x86, uv: Ensure hub revision set for all ACPI modes.
Ensure that UV hub revision is set for all ACPI modes.

Signed-off-by: Russ Anderson <rja@sgi.com>
LKML-Reference: <20100115180908.GB7757@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-15 11:09:04 -08:00
Jack Steiner
7a1110e861 x86, uv: Add function retrieving node controller revision number
Add function for determining the revision id of the SGI UV
node controller chip (HUB). This function is needed in a
subsequent patch.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20100112210904.GA24546@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-15 11:08:55 -08:00
Ben Dooks
3ce2f76f5d ARM: MINI2440: Fixup __initdata usage
Remove some of the __initdata tags which are currently inappropriate for
platform_device and some of the platform data. These can be returned once
support for copying platform devices and data is added.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:04:42 +09:00
Uri Yosef
0a3727ffb9 ARM: MINI2440: Fix crash on boot due to improper __initdata qualifier
This patch fix mini2440 crash on boot due to improper __initdata
qualifier on mini2440_led1_pdata.

Signed-off-by: Uri Yosef <uri.yosef@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 16:56:05 +09:00
Benjamin Herrenschmidt
78924577f4 Merge commit 'gcl/merge' into merge 2010-01-15 13:40:17 +11:00
Benjamin Herrenschmidt
291f8de2c6 Merge commit 'kumar/merge' into merge 2010-01-15 13:40:03 +11:00
Nathan Fontenot
d0174c7219 powerpc: Move cpu hotplug driver lock from pseries to powerpc
Move the defintion and lock helper routines for the cpu hotplug driver
lock from pseries to powerpc code to avoid build breaks for platforms
other than pseries that use cpu hotplug.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:18 +11:00
Nathan Fontenot
9becd2a0d6 powerpc: Move /proc/ppc64 to /proc/powerpc update
It looks like the previous patch sent out to move RTAS and
other items from /proc/ppc64 to /proc/powerpc missed a few
files needed for RAS and DLPAR functionality.

Original Patch here:
http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-September/076096.html

This patch updates the remaining files to be created under /proc/powerpc.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:17 +11:00
Joakim Tjernlund
061ec9599f powerpc/8xx: Fix user space TLB walk in dcbX fixup
The newly added fixup for buggy dcbX insn's has
a bug that always trigger a kernel TLB walk so a user space
dcbX insn will cause a Kernel Machine Check if it hits DTLB error.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:16 +11:00
Stefan Roese
3e7b484354 powerpc: Fix decrementer setup on 1GHz boards
We noticed that recent kernels didn't boot on our 1GHz Canyonlands 460EX
boards anymore. As it seems, patch 8d165db1 [powerpc: Improve
decrementer accuracy] introduced this problem. The routine div_sc()
overflows with shift = 32 resulting in this incorrect setup:

time_init: decrementer frequency = 1000.000012 MHz
time_init: processor frequency   = 1000.000012 MHz
clocksource: timebase mult[400000] shift[22] registered
clockevent: decrementer mult[33] shift[32] cpu[0]

This patch now introduces a local div_dc64() version of this function
so that this overflow doesn't happen anymore.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Detlev Zundel <dzu@denx.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:15 +11:00
Michael Ellerman
b0ff153cd6 powerpc/iseries: Initialise on-stack completion
get_viotape_info() declares a vio_waitevent on the stack, which
contains a completion, but never initialises the completion.

I have no idea how this ever worked, and on recent kernels it causes
an oops in handle_tape_event() when we access the non-initialised
completion.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:14 +11:00
Jiri Slaby
4bf936b9e4 powerpc: Use helpers for rlimits
Make sure compiler won't do weird things with limits. E.g. fetching
them twice may return 2 different values after writable limits are
implemented.

I.e. either use rlimit helpers added in
3e10e716ab
or ACCESS_ONCE if not applicable.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:08 +11:00
Anton Blanchard
c81b812a33 powerpc: cpumask_of_node() should handle -1 as a node
pcibus_to_node can return -1 if we cannot determine which node a pci bus
is on. If passed -1, cpumask_of_node will negatively index the lookup array
and pull in random data:

# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus
00000000,00000003,00000000,00000000
# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist
64-65

Change cpumask_of_node to check for -1 and return cpu_all_mask in this
case:

# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus
ffffffff,ffffffff,ffffffff,ffffffff
# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist
0-127

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:08 +11:00
FUJITA Tomonori
46150a050f powerpc/pseries: Fix dlpar compile warning without CONFIG_PROC_DEVICETREE
cc1: warnings being treated as errors
arch/powerpc/platforms/pseries/dlpar.c: In function 'dlpar_attach_node':
arch/powerpc/platforms/pseries/dlpar.c:239: error: unused variable 'ent'
arch/powerpc/platforms/pseries/dlpar.c: In function 'dlpar_detach_node':
arch/powerpc/platforms/pseries/dlpar.c:271: error: unused variable 'prop'
arch/powerpc/platforms/pseries/dlpar.c:270: error: unused variable 'parent'
make[3]: *** [arch/powerpc/platforms/pseries/dlpar.o] Error 1

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:07 +11:00
Anton Blanchard
92cb3694dd powerpc/pseries: Fix xics interrupt affinity
Commit 57b150cce8 (irq: only update affinity if
->set_affinity() is sucessfull) broke xics irq affinity.

We need to use the cpumask passed in, instead of accessing ->affinity directly.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:07 +11:00
Anton Vorontsov
e443ed3560 powerpc/swsusp_32: Fix TLB invalidation
It seems there is a thinko in the TLB invalidation code that makes the
tlbie in the loop executed just once. The intended check was probably
'gt', not 'lt'.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:07 +11:00
Joakim Tjernlund
9f4f04ba2b powerpc/8xx: Always pin kernel instruction TLB
Various kernel asm modifies SRR0/SRR1 just before executing
a rfi. If such code crosses a page boundary you risk a TLB miss
which will clobber SRR0/SRR1. Avoid this by always pinning
kernel instruction TLB space.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:07 +11:00