Commit Graph

15395 Commits

Author SHA1 Message Date
Paul Mackerras
8b1af56b29 powerpc: Fix i8259 cascade on pSeries with XICS interrupt controller
It turns out that commit f9bd170a87
broke the cascade from XICS to i8259 on pSeries machines; specifically
we ended up not ever doing the EOI on the XICS for the cascade.  The
result was that interrupts from the serial ports (and presumably any
other devices using ISA interrupts) didn't get through.  This fixes
it and also simplifies the code, by doing the EOI on the XICS in the
xics_get_irq routine after reading and acking the interrupt on the
i8259.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-22 21:55:37 +11:00
Hans Verkuil
515432aa7a V4L/DVB (3191): Fix CC output
- CC data was swapped the wrong way around.
- Enabling CC disabled XDS and vice versa: these two should
be independent from one another.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-22 07:55:12 -02:00
Ricardo Cerqueira
7bb9529602 V4L/DVB (3200): Fix saa7134 ALSA/OSS collisions
- When ALSA or OSS are loaded, check if the other is present
Fixed hotplug notifiers cleanup on module removal
- The saa7134 DMA sound modules now have their own Kconfig entries, and
if built statically enforce exclusivity
- SND_PCM_OSS isn't necessary for the OSS driver

Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-22 07:55:06 -02:00
Ian McDonald
4c7e689502 [DCCP]: Comment typo
I hope to actually change this behaviour shortly but this will help
anybody grepping code at present.

Signed-off-by: Ian McDonald <imcdnzl@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-21 19:02:39 -08:00
Kristian Slavov
1d1428045c [IPV6]: Fix address deletion
If you add more than one IPv6 address belonging to the same prefix and 
delete the address that was last added, routing table entry for that 
prefix is also deleted.
Tested on 2.6.14.4

To reproduce:
ip addr add 3ffe::1/64 dev eth0
ip addr add 3ffe::2/64 dev eth0
/* wait DAD */
sleep 1
ip addr del 3ffe::2/64 dev eth0
ip -6 route

(route to 3ffe::/64 should be gone)

In ipv6_del_addr(), if ifa == ifp, we set ifa->if_next to NULL, and later 
assign ifap = &ifa->if_next, effectively terminating the for-loop.
This prevents us from checking if there are other addresses using the same 
prefix that are valid, and thus resulting in deletion of the prefix.
This applies only if the first entry in idev->addr_list is the address to 
be deleted.

Signed-off-by: Kristian Slavov <kristian.slavov@nomadiclab.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-21 18:47:24 -08:00
Mika Kukkonen
7eb1b3d372 [VLAN]: Add two missing checks to vlan_ioctl_handler()
In vlan_ioctl_handler() the code misses couple checks for
error return values.

Signed-off-by: Mika Kukkonen <mikukkon@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-21 18:39:49 -08:00
Mika Kukkonen
0d77d59f62 [NETROM]: Fix three if-statements in nr_state1_machine()
I found these while compiling with extra gcc warnings;
considering the indenting surely they are not intentional?

Signed-off-by: Mika Kukkonen <mikukkon@iki.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-21 18:38:26 -08:00
Linus Torvalds
d5ea4e2660 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 2005-12-21 15:09:50 -08:00
Linus Torvalds
c7ac6b42ff Initialize drivers/media/video/saa7134 late
When compiled-in, make sure the sound system has initialized
before these drivers do.

Reported by Adrian Bunk <bunk@stusta.de>

(The right fix would be to make the sound core use "subsys_initcall()"
and thus initialize before all normal drivers, but this is the quick
and limited safe fix for 2.6.15).

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-21 14:52:32 -08:00
Alan Stern
5a9191ff68 [PATCH] usbcore: allow suspend/resume even if drivers don't support it
This patch (as618) changes usbcore to prevent derailing the
suspend/resume sequence when a USB driver doesn't include support for
it.  This is a workaround rather than a true fix; the core needs to be
changed so that URB submissions from suspended drivers can be refused
and outstanding URBs cancelled.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-21 14:46:35 -08:00
Paul Walmsley
28120be5d6 [PATCH] USB Storage: Force starget->scsi_level in usb-storage scsiglue.c
When the usb-storage module forces sdev->scsi_level to SCSI_2, it should
also force starget->scsi_level to the same value.  Otherwise, the SCSI
layer may attempt to issue SCSI-3 commands to the device, such as REPORT
LUNS, which it cannot handle.  This can prevent the device from working
with Linux.

The AMS Venus DS3 DS2316SU2S SATA-to-SATA+USB enclosure, based on the
Oxford Semiconductor OXU921S chip, requires this patch to function
correctly on Linux.  The enclosure reports a SCSI-3 SPC-2 command set
level, but does not correctly handle the REPORT LUNS SCSI command -
probably due to a bug in its firmware.

It seems likely that other USB storage enclosures with similar bugs will
also benefit from this patch.

Tony Lindgren <tony@atomide.com> collaborated in the development of this
patch.

Signed-off-by: Paul Walmsley <paul@booyaka.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-21 14:46:34 -08:00
Adrian Bunk
23f9b317e0 [PATCH] include/linux/irq.h: #include <linux/smp.h>
Jan's crosscompile page [1] shows, that one regression in 2.6.15-rc is
that the v850 defconfig does no longer compile.

The compile error is:

<--  snip  -->

...
  CC      arch/v850/kernel/setup.o
In file included from /usr/src/ctest/rc/kernel/arch/v850/kernel/setup.c:17:
/usr/src/ctest/rc/kernel/include/linux/irq.h:13:43: asm/smp.h: No such file or directory
make[2]: *** [arch/v850/kernel/setup.o] Error 1

<--  snip  -->

The #include <asm/smp.h> in irq.h was intruduced in 2.6.15-rc.

Since include/linux/irq.h needs code from asm/smp.h only in the
CONFIG_SMP=y case and linux/smp.h #include's asm/smp.h only in the
CONFIG_SMP=y case, I'm suggesting this patch to #include <linux/smp.h>
in irq.h.

I've tested the compilation with both CONFIG_SMP=y and CONFIG_SMP=n
on i386.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-21 14:45:25 -08:00
Linus Torvalds
bee5ab3f57 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 2005-12-21 11:05:15 -08:00
YOSHIFUJI Hideaki
6b3ae80a63 [IPV6]: Don't select a tentative address as a source address.
A tentative address is not considered "assigned to an interface"
in the traditional sense (RFC2462 Section 4).
Don't try to select such an address for the source address.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 22:58:01 +09:00
YOSHIFUJI Hideaki
c5e33bddd3 [IPV6]: Run DAD when the link becomes ready.
If the link was not available when the interface was created,
run DAD for pending tentative addresses when the link becomes ready.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 22:57:44 +09:00
YOSHIFUJI Hideaki
3c21edbd11 [IPV6]: Defer IPv6 device initialization until the link becomes ready.
NETDEV_UP might be sent even if the link attached to the interface was
not ready.  DAD does not make sense in such case, so we won't do so.
After interface

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 22:57:24 +09:00
YOSHIFUJI Hideaki
8de3351e6e [IPV6]: Try not to send icmp to anycast address.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 22:57:06 +09:00
YOSHIFUJI Hideaki
58c4fb86ea [IPV6]: Flag RTF_ANYCAST for anycast routes.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 22:56:42 +09:00
Alex Williamson
05465fd562 [ACPI] increase owner_id limit to 64 from 32
This is an interim patch until changes in an updated
ACPICA core increase the limit to 255.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-12-21 04:52:16 -05:00
Len Brown
d8bcd8e415 Auto-update from upstream 2005-12-21 04:38:01 -05:00
Linus Torvalds
b05948d9b7 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-12-20 17:33:54 -08:00
Tom Zanussi
fd30fc3256 [PATCH] relayfs: remove warning printk() in relay_switch_subbuf()
There's currently a diagnostic printk in relay_switch_subbuf() meant as
a warning if you accidentally try to log an event larger than the
sub-buffer size.

The problem is if this happens while logging from somewhere it's not
safe to be doing printks, such as in the scheduler, you can end up with
a deadlock.  This patch removes the warning from relay_switch_subbuf()
and instead prints some diagnostic info when the channel is closed.

Thanks to Mathieu Desnoyers for pointing out the problem and
suggesting a fix.

Signed-off-by: Tom Zanussi <zanussi@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20 17:33:22 -08:00
David S. Miller
a9c9dff1bc [SPARC64]: Stop putting -finline-limit=XXX into CFLAGS
It was a stupid workaround for the "static inline" vs.
"extern inline" issues of long ago, and it is what causes
schedule() to be inlined like crazy into kernel/sched.c
when -Os is specified.

MIPS and S390 should probably do the same.

Now CC_OPTIMIZE_FOR_SIZE can be safely used on sparc64
once more.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-20 14:53:05 -08:00
Ingo Molnar
bb44f116a1 [PATCH] fix spinlock-debugging smp_processor_id() usage
When a spinlock debugging check hits, we print the CPU number as an
informational thing - but there is no guarantee that preemption is off
at that point - hence we should use raw_smp_processor_id().  Otherwise
DEBUG_PREEMPT will print a warning.

With this fix the warning goes away and only the spinlock-debugging info
is printed.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20 10:47:55 -08:00
Andi Kleen
391eadeec8 [PATCH] Fix build with CONFIG_PCI_MMCONFIG
Now needs to include the type 1 functions ("direct") too.

Reported by Pavel Roskin <proski@gnu.org>

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20 10:41:57 -08:00
Andreas Gruenbacher
b7964c3d88 [PATCH] nfsd: check for read-only exports before setting acls
We must check for MAY_SATTR before setting acls, which includes checking
for read-only exports: the lower-level setxattr operation that
eventually sets the acl cannot check export-level restrictions.

Bug reported by Martin Walter <mawa@uni-freiburg.de>.

Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20 10:31:33 -08:00
Jason Wessel
9e28393998 [PATCH] kernel/params.c: fix sysfs access with CONFIG_MODULES=n
All the work was done to setup the file and maintain the file handles but
the access functions were zeroed out due to the #ifdef.  Removing the
#ifdef allows full access to all the parameters when CONFIG_MODULES=n.

akpm: put it back again, but use CONFIG_SYSFS instead.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20 10:31:33 -08:00
Andi Kleen
7e87023348 [PATCH] Fix swiotlb pci_map_sg error handling
The overflow checking condition in lib/swiotlb.c was wrong.
It would first run a NULL pointer through virt_to_phys before
testing it. Since pci_map_sg overflow is not that uncommon
and causes data corruption (including broken file systems) when not
properly detected I think it's better to fix it in 2.6.15.

This affects x86-64 and IA64.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20 10:13:54 -08:00
Knut Petersen
7ca0b3bf69 [PATCH] Fix framebuffer console upside-down ywrap scrolling
Whenever ywrap scrolling is selected together with 180 degree screen
rotation, 2.6.15-rc6 and earlier versions are broken.  fb_pan_display()
expects non-negative yoffsets, but ud_update_start() calls it with
yoffsets down to -(yres - font height).  This patch transforms yoffset
to the correct range 0 ...  vyres-1.

Some obviously unneeded parentheses are removed, too.

Verified with cyblafb, should be applied before 2.6.15-final because it
does fix the framebuffer rotation code introduced early in the 2.6.15
release cycle.

Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de>
Acked-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20 09:44:20 -08:00
Linus Torvalds
d5d74efbea Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge 2005-12-20 09:41:25 -08:00
Linus Torvalds
fc7e13104f Merge branch 'fixes' of git://git.linux-nfs.org/pub/linux/nfs-2.6 2005-12-20 09:35:05 -08:00
Antonino A. Daplas
33c37c06f8 [PATCH] intelfb: Fix oops when changing video mode
Reported by: janis huang (Bugzilla Bug 5747)

Fix on oops in intelfb.  Not sure what's happening, looks like
dinfo->name pointer is invalidated after initialization.  Remove
intelfb_get_fix, it's not needed and move the majority of the code to
the initialization routine.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20 09:27:15 -08:00
Antonino A. Daplas
4b3760ce3d [PATCH] intelfb: Fix freeing of nonexistent resource
Fix intelfb trying to free a non-existent resource in its error path.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20 09:27:15 -08:00
Benjamin Herrenschmidt
6ee7fb7e36 [PATCH] powerpc: g5 thermal overtemp bug
The g5 thermal control for liquid cooled machines has a small bug, when
the temperatures gets too high, it boosts all fans to the max, but
incorrectly sets the liquids pump to the min instead of the max speed,
thus causing the overtemp condition not to clear and the machine to shut
down after a while. This fixes it to set the pumps to max speed instead.
This problem might explain some of the reports of random shutdowns that
some g5 users have been reporting in the past.

Many thanks to Marcus Rothe for spending a lot of time trying various
patches & sending log logs before I found out that typo. Note that
overtemp handling is still not perfect and the machine might still
shutdown, that patch should reduce if not eliminate such occcurences in
"normal" conditions with high load. I'll implement a better handling
with proper slowing down of the CPUs later.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20 09:25:33 -08:00
Paul Mackerras
5a1244e9dd powerpc: update defconfigs
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-20 16:00:17 +11:00
Edson Seabra
b273ed266a [PATCH] powerpc: CPM2 interrupt handler failure after 100,000 interrupts
The CPM2 interrupt handler does not return success to the IRQ subsystem, which
causes it to kill the IRQ line after 100,000 interrupts.

Signed-off-by: Edson Seabra <Edson.Seabra@cyclades.com>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-20 15:39:33 +11:00
Paul Mackerras
3eb6f26bcd powerpc: correct register usage in 64-bit syscall exit path
Since we don't restore the volatile registers in the syscall exit
path, we need to make sure we don't leak any potentially interesting
values from the kernel to userspace.  This was already the case for
all except r11.  This makes it use r11 for an MSR value, so r11 will
have an (uninteresting) MSR value in it on return to userspace.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-20 15:38:47 +11:00
Trond Myklebust
9b5b1f5bf9 NLM: Fix Oops in nlmclnt_mark_reclaim()
When mixing -olock and -onolock mounts on the same client, we have to
 check that fl->fl_u.nfs_fl.owner is set before dereferencing it.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-12-19 23:12:31 -05:00
Trond Myklebust
48e4918775 SUNRPC: Fix "EPIPE" error on mount of rpcsec_gss-protected partitions
gss_create_upcall() should not error just because rpc.gssd closed the
 pipe on its end. Instead, it should requeue the pending requests and then
 retry.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-12-19 23:12:21 -05:00
Trond Myklebust
29884df0d8 NFS: Fix another O_DIRECT race
Ensure we call unmap_mapping_range() and sync dirty pages to disk before
 doing an NFS direct write.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-12-19 23:12:09 -05:00
Trond Myklebust
b079fa7baa RPC: Do not block on skb allocation
If we get something like the following,
 [  125.300636]  [<c04086e1>] schedule_timeout+0x54/0xa5
 [  125.305931]  [<c040866e>] io_schedule_timeout+0x29/0x33
 [  125.311495]  [<c02880c4>] blk_congestion_wait+0x70/0x85
 [  125.317058]  [<c014136b>] throttle_vm_writeout+0x69/0x7d
 [  125.322720]  [<c014714d>] shrink_zone+0xe0/0xfa
 [  125.327560]  [<c01471d4>] shrink_caches+0x6d/0x6f
 [  125.332581]  [<c01472a6>] try_to_free_pages+0xd0/0x1b5
 [  125.338056]  [<c013fa4b>] __alloc_pages+0x135/0x2e8
 [  125.343258]  [<c03b74ad>] tcp_sendmsg+0xaa0/0xb78
 [  125.348281]  [<c03d4666>] inet_sendmsg+0x48/0x53
 [  125.353212]  [<c0388716>] sock_sendmsg+0xb8/0xd3
 [  125.358147]  [<c0388773>] kernel_sendmsg+0x42/0x4f
 [  125.363259]  [<c038bc00>] sock_no_sendpage+0x5e/0x77
 [  125.368556]  [<c03ee7af>] xs_tcp_send_request+0x2af/0x375
 then the socket is blocked until memory is reclaimed, and no
 progress can ever be made.

 Try to access the emergency pools by using GFP_ATOMIC.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-12-19 23:11:54 -05:00
Linus Torvalds
3e1ec1f433 Merge branch 'to_linus' of master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb 2005-12-19 18:34:37 -08:00
Neil Brown
bcb97940f3 [PATCH] md: Change case of raid level reported in sys/mdX/md/level
I had thought that keeping the reported tail level clearly different
from the module name was a good idea, but I've changed my mind.

'raid5' is better and probably less confusing than 'RAID-5'.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-19 16:47:50 -08:00
Ben Collins
f98d2dfd02 [PATCH] block: Cleanup CDROMEJECT ioctl
This is just a basic cleanup. No change in functionality.

Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-19 16:47:50 -08:00
Linus Torvalds
931b11be32 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/tg3-2.6 2005-12-19 16:46:14 -08:00
Linus Torvalds
546ac8a631 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-12-19 16:43:57 -08:00
Linus Torvalds
ce7fa1b3f9 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2005-12-19 16:43:36 -08:00
Linus Torvalds
d898d485e7 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-12-19 16:43:13 -08:00
Michael Chan
38690194bc [TG3]: Fix ethtool memory test
Skip the memory 0xb50 to 0x1000 during "ethtool -t" memory test.
Overwriting memory in this region can cause ASF problems.

Update version and release date.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19 16:27:28 -08:00
Michael Chan
b401e9e2ec [TG3]: Add tw32_wait_f() for some sensitive registers
The tw32_f() function (register write with immediate read flush) can
hang when used on some registers to switch clock frequencies and
power. A new tw32_wait_f() is added for such registers with the
delay before the read and after the read.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19 16:27:04 -08:00