Commit Graph

145 Commits

Author SHA1 Message Date
Chanwoo Choi
0d37189e80 PM / devfreq: Send the DEVFREQ_POSTCHANGE notification when target() is failed
This patch sends the DEVFREQ_POSTCHANGE notification when
devfreq->profile->targer() is failed. The PRECHANGE/POSTCHANGE
should be paired.

Fixes: 0fe3a66410 (PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier)
Reported-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-23 23:15:12 +02:00
Lukasz Luba
8d39fc085d PM / devfreq: fix initialization of current frequency in last status
Some systems need current frequency from last_status for calculation
but it is zeroed during initialization. When the device starts there is
no history, but we can assume that the last frequency was the
same as the initial frequency (which is also used in 'previous_freq').
The log shows the result of this misinterpreted value.
[    2.042847] ... Failed to get voltage for frequency 0: -34

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:53:00 +09:00
Dan Carpenter
674789dd2c PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
Smatch complains because platform_get_resource() returns NULL on error
and not an error pointer so the check is wrong.  Julia Lawall pointed
out that normally we don't check these, because devm_ioremap_resource()
has a check for NULL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:52:55 +09:00
MyungJoo Ham
67ffdb529b PM / devfreq: remove double put_device
When device_register() returns with error, it has already
done put_device() on the input device pointer.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:52:52 +09:00
Cai Zhiyong
a5e9b937fa PM / devfreq: fix double call put_device
1295  */
1296 void device_unregister(struct device *dev)
1297 {
1298         pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
1299         device_del(dev);
1300         put_device(dev);
1301 }
1302 EXPORT_SYMBOL_GPL(device_unregister);
1303

device_unregister is called put_device, there is no need to call
put_device(&devfreq->dev) again.

Signed-off-by: Cai Zhiyong <caizhiyong@huawei.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:52:43 +09:00
MyungJoo Ham
ac4b281176 PM / devfreq: fix duplicated kfree on devfreq pointer
device_unregister() calls kfree already.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:52:40 +09:00
MyungJoo Ham
3e1d7fb0d2 PM / devfreq: devm_kzalloc to have dev pointer more precisely
devm_kzalloc of devfreq's statistics data structure has been
using its parent device as the dev allocated for.
If a device's devfreq is disabled in run-time,
such allocated memory won't be freed.

Desginating more precisely with the devfreq device
pointer fixes the issue.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:51:08 +09:00
MyungJoo Ham
83cb0e4d83 PM / devfreq: style/typo fixes
- Typo in comments fixed
- Unnecessary return statement removed

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-05-03 11:22:10 +09:00
Chanwoo Choi
19cf91d0f9 PM / devfreq: event: Find the instance of devfreq-event device by using phandle
This patch use the phandle to find the instance of devfreq-event device in
Device Tree when calling the devfreq_event_get_edev_by_phandle() because there
is two type devfreq-event devices as following:

First case, exynos-ppmu.c driver provides the maximum four event of each PPMU.
So, when getting the instance of devfreq-event device, using the unique name of
struct devfreq_event_desc.

Second case, exynos-nocp.c driver provide the only one event of each NoC Probe
device. So, when getting the instance of devfreq-event device, using the
phandle of each NoC probe device.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-05-03 11:21:51 +09:00
Chanwoo Choi
0179a91387 PM / devfreq: event: Add new Exynos NoC probe driver
This patch adds NoC (Network on Chip) Probe driver which provides
the primitive values to get the performance data. The packets that the Network
on Chip (NoC) probes detects are transported over the network infrastructure.
Exynos542x bus has multiple NoC probes to provide bandwidth information about
behavior of the SoC that you can use while analyzing system performance.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03 11:21:07 +09:00
Chanwoo Choi
bfcd620487 PM / devfreq: exynos: Remove unused exynos4/5 busfreq driver
This patch removes the unused exynos4/5 busfreq driver. Instead,
generic exynos-bus frequency driver support the all Exynos SoCs.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03 11:20:09 +09:00
Chanwoo Choi
403e0689d2 PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor
This patch adds the support of bus frequency feature for sub-blocks which share
the one power line. If each bus depends on the power line, each bus is not able
to change the voltage by oneself. To optimize the power-consumption on runtime,
some buses using the same power line should change the source clock and
regulator at the same time. So, this patch uses the passive governor to support
the bus frequency for all buses which sharing the one power line.

For example,

Exynos3250 include the two power line for AXI buses as following:
: VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller)
  with the power (regulator).
: VDD_INT : INT (Internal) provide the various sub-blocks with the power
  (regulator).

Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus
use the power line. So, there is no any depencency between buese. But, in the
case of VDD_INT, various buses share the one power line of VDD_INT. We need to
make the depenency between buses. When using passive governor, there is no
problem to support the bus frequency as DVFS for all buses. One bus should be
operated as the parent bus device which gathering the current load of INT block
and then decides the new frequency with some governors except of passive
governor. After deciding the new frequency by the parent bus device, the rest
bus devices will change the each source clock according to new frequency of the
parent bus device.

- MIF (Memory Interface) block
: VDD_MIF |--- DMC

- INT (Internal) block
: VDD_INT |--- LEFTBUS (parent)
          |--- PERIL
          |--- MFC
          |--- G3D
          |--- RIGHTBUS
          |--- FSYS
          |--- LCD0
          |--- PERIR
          |--- ISP
          |--- CAM

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[tjakobi: Reported debugfs error during booting and cw00.choi fix it.]
Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03 11:20:08 +09:00
Chanwoo Choi
996133119f PM / devfreq: Add new passive governor
This patch adds the new passive governor for DEVFREQ framework. The following
governors are already present and used for DVFS (Dynamic Voltage and Frequency
Scaling) drivers. The following governors are independently used for one device
driver which don't give the influence to other device drviers and also don't
receive the effect from other device drivers.
- ondemand / performance / powersave / userspace

The passive governor depends on operation of parent driver with specific
governos extremely and is not able to decide the new frequency by oneself.
According to the decided new frequency of parent driver with governor,
the passive governor uses it to decide the appropriate frequency for own
device driver. The passive governor must need the following information
from device tree:
- the source clock and OPP tables
- the instance of parent device

For exameple,
there are one more devfreq device drivers which need to change their source
clock according to their utilization on runtime. But, they share the same
power line (e.g., regulator). So, specific device driver is operated as parent
with ondemand governor and then the rest device driver with passive governor
is influenced by parent device.

Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[tjakobi: Reported RCU locking issue and cw00.choi fix it]
Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
[linux.amoon: Reported possible recursive locking and cw00.choi fix it]
Reported-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03 11:20:07 +09:00
Chanwoo Choi
0fe3a66410 PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier
This patch adds the new DEVFREQ_TRANSITION_NOTIFIER notifier to send
the notification when the frequency of device is changed.
This notifier has two state as following:
- DEVFREQ_PRECHANGE  : Notify it before chaning the frequency of device
- DEVFREQ_POSTCHANGE : Notify it after changed the frequency of device

And this patch adds the resourced-managed function to release the resource
automatically when error happen.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board]
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03 11:20:07 +09:00
Chanwoo Choi
8f510aeb22 PM / devfreq: Add devfreq_get_devfreq_by_phandle()
This patch adds the new devfreq_get_devfreq_by_phandle() OF helper function
which can find the instance of devfreq device by using phandle ("devfreq").

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
[m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board]
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03 11:20:06 +09:00
Chanwoo Choi
0722249ac1 PM / devfreq: exynos: Add generic exynos bus frequency driver
This patch adds the generic exynos bus frequency driver for AMBA AXI bus
of sub-blocks in exynos SoC with DEVFREQ framework. The Samsung Exynos SoC
have the common architecture for bus between DRAM and sub-blocks in SoC.
This driver can support the generic bus frequency driver for Exynos SoCs.

In devicetree, Each bus block has a bus clock, regulator, operation-point
and devfreq-event devices which measure the utilization of each bus block.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board]
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03 11:20:05 +09:00
Geert Uytterhoeven
027b6934aa PM / devfreq: Spelling s/frequnecy/frequency/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-17 02:30:16 +01:00
Tomeu Vizoso
dbb0c7c430 PM / devfreq: tegra: Set freq in rate callback
As per the documentation of the devfreq_dev_profile.target callback, set
the freq argument to the new frequency before returning.

This caused endless messages like this after recent changes in the core:

devfreq 6000c800.actmon: Couldn't update frequency transition information.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reported-by: Tyler Baker <tyler.baker@linaro.org>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-02-23 14:27:42 +09:00
MyungJoo Ham
34bd322070 PM / devfreq: Do not show statistics if it's not ready.
Before this patch for a device without statistics support,

$ cat trans_stat
    From  :   To
          :   time(ms)
Total transitions : 0
$

After this patch applied for such a device,

$ cat trans_stat
Not Supported.
$

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13 17:30:33 +09:00
Chanwoo Choi
d7df1e4647 PM / devfreq: Modify the indentation of trans_stat sysfs for readability
This patch modifies the indentation of 'trans_stat' sysfs to improve readability.
The 1GHz is 1000,000,000. So it needs the least 10 position to show the GHz unit.

- Before apply this patch,
-sh-3.2# cat trans_stat
   From  :   To
         :50000000100000000133000000200000000400000000   time(ms)
*50000000:       0       0       0       0       7   1817635
 100000000:       4       0       0       0       4      1590
 133000000:       1       4       0       0       7       975
 200000000:       2       2       7       0       1      2655
 400000000:       0       2       5      12       0      1860
Total transition : 58

- After apply this patch,
-sh-3.2# cat trans_stat
     From  :   To
           :  50000000 100000000 133000000 200000000 400000000   time(ms)
*  50000000:         0         0         0         0         7     14405
  100000000:         4         0         0         0         3      2015
  133000000:         2         3         0         0         7      1020
  200000000:         1         2         7         0         0      2970
  400000000:         0         2         5        10         0      1575
Total transition : 53

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13 17:30:33 +09:00
Chanwoo Choi
0ec09ac2ce PM / devfreq: Set the freq_table of devfreq device
This patch initialize the freq_table array of each devfreq device by using
the devfreq_set_freq_table(). If freq_table is NULL, the devfreq framework
is not able to support the frequency transtion information through sysfs.

The OPP core uses the integer type for the number of opps in the opp list
and uses the 'unsigned long' type for each frequency. So, this patch
modifies the type of some variable as following:
- the type of freq_table : unsigned int -> unsigned long
- the type of max_state  : unsigned int -> int

- Corrected types, format strings, mutex usages by MyungJoo

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13 17:30:32 +09:00
Chanwoo Choi
3104fa3081 PM / devfreq: Add show_one macro to delete the duplicate code
This patch adds the 'show_one' macro to simplify the duplicate code
of both max_freq_show() and min_freq_show().

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13 17:30:32 +09:00
Chanwoo Choi
e54916c6e1 PM / devfreq: event: Fix the error and warning from script/checkpatch.pl
This patch just fixes following error and warning by using
scripts/checkpatch.pl.

- Follwoing issue from checkpatch.pl:
ERROR: space prohibited before that close parenthesis ')'
+	if (count < 0 ) {

WARNING: line over 80 characters
+	ptr = devres_alloc(devm_devfreq_event_release, sizeof(*ptr), GFP_KERNEL);

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13 17:30:32 +09:00
Chanwoo Choi
df678ff753 PM / devfreq: event: Remove the error log of devfreq_event_get_edev_by_phandle()
This patch just removes the error log when
devfreq_event_get_edev_by_phandle() fail to get the instance of
devfreq-event device. It is related to sequence of the probe() of each
driver. So, this error log might show the always during kernel booting.
Each driver using this function can show the appropriate error log.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13 17:30:32 +09:00
Geliang Tang
6d3cbfa718 PM / devfreq: fix double kfree
When device_register() fails, kfree(devfreq) is called already in
devfreq_dev_release(), hence there is no need to call kfree(devfreq)
in err_dev again.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-10-02 11:05:58 +09:00
Tobias Jakobi
14a21e7ba8 PM / devfreq: Fix governor_store()
Writing the currently set governor into sysfs currently
seems to fail.
Fix this by setting the return code to zero before
leaving governor_store().

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-30 14:16:31 +09:00
Xiaolong Ye
5f25f066f7 PM / devfreq: Fix incorrect type issue.
time_in_state in struct devfreq is defined as unsigned long, so
devm_kzalloc should use sizeof(unsigned long) as argument instead
of sizeof(unsigned int), otherwise it will cause unexpected result
in 64bit system.

Signed-off-by: Xiaolong Ye <yexl@marvell.com>
Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11 14:23:30 +09:00
MyungJoo Ham
14de390318 PM / devfreq: tegra: Update governor to use devfreq_update_stats()
Direct invocation of get_dev_status() is no more recommended.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11 14:23:30 +09:00
Javi Merino
d3b7e1745c PM / devfreq: drop comment about thermal setting max_freq
The thermal infrastructure should use the devfreq cooling device, which
uses the OPP library to disable OPPs as necessary.

Fix a couple of typos in the same comment while we are at it.

Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11 14:23:29 +09:00
Javi Merino
08e75e754a PM / devfreq: cache the last call to get_dev_status()
The return value of get_dev_status() can be reused.  Cache it so that
other parts of the kernel can reuse it instead of having to call the
same function again.

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11 14:23:28 +09:00
Viresh Kumar
9348da2f1c PM / devfreq: Drop unlikely before IS_ERR(_OR_NULL)
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there
is no need to do that again from its callers. Drop it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11 14:23:21 +09:00
MyungJoo Ham
86fa4cdb0f PM / devfreq: exynos-ppmu: bit-wise operation bugfix.
Make it u64 before left-shifting 32bits.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11 14:22:26 +09:00
Chanwoo Choi
77fe46a301 PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433
This patch adds the support for PPMU (Platform Performance Monitoring Unit)
version 2.0 for Exynos5433 SoC. Exynos5433 SoC must need PPMUv2 which is
quite different from PPMUv1.1. The exynos-ppmu.c driver supports both PPMUv1.1
and PPMUv2.

Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-11 14:22:26 +09:00
Tomeu Vizoso
358b615f58 PM / devfreq: tegra: Register governor on module init
So this driver builds as a module.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31 13:17:15 +09:00
Tomeu Vizoso
34ed504008 PM / devfreq: tegra: Enable interrupts after resuming the devfreq monitor
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31 13:17:15 +09:00
Tomeu Vizoso
2da19b1a4d PM / devfreq: tegra: Set drvdata before enabling the irq
To avoid a race in which the interrupt will be handled before the
drvdata has been set up.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31 13:17:14 +09:00
Tomeu Vizoso
5d498b463a PM / devfreq: tegra: remove operating-points
As the DT bindings don't have an operating-points property any more,
build the OPP table from the frequencies supported by the EMC clock.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31 13:17:14 +09:00
Tomeu Vizoso
c70eea739f PM / devfreq: tegra: Use clock rate constraints
Now that we have per-user clocks and the possibility to set constraints
in a clock, set a floor constraint on the EMC clock.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31 13:17:13 +09:00
Tomeu Vizoso
11573e9132 PM / devfreq: tegra: Update to v5 of the submitted patches
There seemed to be some miscommunication and an old version of the
submitted patches was merged.

This commit updates the driver to v5, which had this changelog:

* Clarify the units of avg_dependency_threshold
* Remove unused references to platform_device
* Enable and disable interrupts on governor events
* Make sure we handle all interrupts for any of the devices we are sampling
* Move locking to be per-actmon-device

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
CC: Alex Frid <afrid@nvidia.com>
CC: Mikko Perttunen <mikko.perttunen@kapsi.fi>
[Added const to device ID by MyungJoo]
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31 13:17:03 +09:00
MyungJoo Ham
4b524f1218 PM / devfreq: correct misleading comment
_remove_devfreq() does not have @skip anymore after 3.16.
The comment for _remove_devfreq() has been updated correspondingly.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-30 17:09:41 +09:00
Chanwoo Choi
6f240fbc47 PM / devfreq: event: Add const keyword for devfreq_event_ops structure
This patch adds the const keyword for devfreq_event_ops structure
because the ops of devfreq_event_desc structure should not be changed
after initialization.

Cc: Myungjoo Ham <myungjoo.ham@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-30 17:09:41 +09:00
Rafael J. Wysocki
c7fb90dfbe Merge branches 'pm-cpufreq', 'pm-cpuidle', 'pm-devfreq', 'pm-opp' and 'pm-tools'
* pm-cpufreq:
  cpufreq: speedstep-smi: enable interrupts when waiting

* pm-cpuidle:
  intel_idle: support additional Broadwell model

* pm-devfreq:
  PM / devfreq: event: testing the wrong variable

* pm-opp:
  PM / OPP / clk: Remove unnecessary OOM message

* pm-tools:
  tools/power turbostat: support additional Broadwell model
  tools/power turbostat: update parameters, documentation
  tools/power turbostat: Skip printing disabled package C-states
2015-02-13 21:39:06 +01:00
Dan Carpenter
04a695edca PM / devfreq: event: testing the wrong variable
There is a typo here so we test "edev" but we intended to test
"edev[i]".

Fixes: f262f28c14 ('PM / devfreq: event: Add devfreq_event class')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-12 02:06:20 +01:00
Linus Torvalds
872912352c ACPI and power management updates for v3.20-rc1
- Rework of the core ACPI resources parsing code to fix issues
    in it and make using resource offsets more convenient and
    consolidation of some resource-handing code in a couple of places
    that have grown analagous data structures and code to cover the
    the same gap in the core (Jiang Liu, Thomas Gleixner, Lv Zheng).
 
  - ACPI-based IOAPIC hotplug support on top of the resources handling
    rework (Jiang Liu, Yinghai Lu).
 
  - ACPICA update to upstream release 20150204 including an interrupt
    handling rework that allows drivers to install raw handlers for
    ACPI GPEs which then become entirely responsible for the given GPE
    and the ACPICA core code won't touch it (Lv Zheng, David E Box,
    Octavian Purdila).
 
  - ACPI EC driver rework to fix several concurrency issues and other
    problems related to events handling on top of the ACPICA's new
    support for raw GPE handlers (Lv Zheng).
 
  - New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power
    Subsystem) driver for Intel chips (Ken Xue).
 
  - Two minor fixes of the ACPI LPSS driver (Heikki Krogerus,
    Jarkko Nikula).
 
  - Two new blacklist entries for machines (Samsung 730U3E/740U3E and
    510R) where the native backlight interface doesn't work correctly
    while the ACPI one does (Hans de Goede).
 
  - Rework of the ACPI processor driver's handling of idle states
    to make the code more straightforward and less bloated overall
    (Rafael J Wysocki).
 
  - Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht,
    Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki,
    Yaowei Bai).
 
  - PCI core power management modification to avoid resuming (some)
    runtime-suspended devices during system suspend if they are in
    the right states already (Rafael J Wysocki).
 
  - New SFI-based cpufreq driver for Intel platforms using SFI
    (Srinidhi Kasagar).
 
  - cpufreq core fixes, cleanups and simplifications (Viresh Kumar,
    Doug Anderson, Wolfram Sang).
 
  - SkyLake CPU support and other updates for the intel_pstate driver
    (Kristen Carlson Accardi, Srinivas Pandruvada).
 
  - cpufreq-dt driver cleanup (Markus Elfring).
 
  - Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla).
 
  - Generic power domains core code fixes and cleanups (Ulf Hansson).
 
  - Operating Performance Points (OPP) core code cleanups and kernel
    documentation update (Nishanth Menon).
 
  - New dabugfs interface to make the list of PM QoS constraints
    available to user space (Nishanth Menon).
 
  - New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso).
 
  - New devfreq class (devfreq_event) to provide raw utilization data
    to devfreq governors (Chanwoo Choi).
 
  - Assorted minor fixes and cleanups related to power management
    (Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist,
    Pavel Machek, Todd E Brandt, Wonhong Kwon).
 
  - turbostat updates (Len Brown) and cpupower Makefile improvement
    (Sriram Raghunathan).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJU2neOAAoJEILEb/54YlRx51QP/jrv1Wb5eMaemzMksPIWI5Zn
 I8IbxzToxu7wDDsrTBRv+LuyllMPrnppFOHHvB35gUYu7Y6I066s3ErwuqeFlbmy
 +VicmyGMahv3yN74qg49MXzWtaJZa8hrFXn8ItujiUIcs08yELi0vBQFlZImIbTB
 PdQngO88VfiOVjDvmKkYUU//9Sc9LCU0ZcdUQXSnA1oNOxuUHjiARz98R03hhSqu
 BWR+7M0uaFbu6XeK+BExMXJTpKicIBZ1GAF6hWrS8V4aYg+hH1cwjf2neDAzZkcU
 UkXieJlLJrCq+ZBNcy7WEhkWQkqJNWei5WYiy6eoQeQpNoliY2V+2OtSMJaKqDye
 PIiMwXstyDc5rgyULN0d1UUzY6mbcUt2rOL0VN2bsFVIJ1HWCq8mr8qq689pQUYv
 tcH18VQ2/6r2zW28sTO/ByWLYomklD/Y6bw2onMhGx3Knl0D8xYJKapVnTGhr5eY
 d4k41ybHSWNKfXsZxdJc+RxndhPwj9rFLfvY/CZEhLcW+2pAiMarRDOPXDoUI7/l
 aJpmPzy/6mPXGBnTfr6jKDSY3gXNazRIvfPbAdiGayKcHcdRM4glbSbNH0/h1Iq6
 HKa8v9Fx87k1X5r4ZbhiPdABWlxuKDiM7725rfGpvjlWC3GNFOq7YTVMOuuBA225
 Mu9PRZbOsZsnyNkixBpX
 =zZER
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "We have a few new features this time, including a new SFI-based
  cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new
  devfreq class for providing its governors with raw utilization data
  and a new ACPI driver for AMD SoCs.

  Still, the majority of changes here are reworks of existing code to
  make it more straightforward or to prepare it for implementing new
  features on top of it.  The primary example is the rework of ACPI
  resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with
  support for IOAPIC hotplug implemented on top of it, but there is
  quite a number of changes of this kind in the cpufreq core, ACPICA,
  ACPI EC driver, ACPI processor driver and the generic power domains
  core code too.

  The most active developer is Viresh Kumar with his cpufreq changes.

  Specifics:

   - Rework of the core ACPI resources parsing code to fix issues in it
     and make using resource offsets more convenient and consolidation
     of some resource-handing code in a couple of places that have grown
     analagous data structures and code to cover the the same gap in the
     core (Jiang Liu, Thomas Gleixner, Lv Zheng).

   - ACPI-based IOAPIC hotplug support on top of the resources handling
     rework (Jiang Liu, Yinghai Lu).

   - ACPICA update to upstream release 20150204 including an interrupt
     handling rework that allows drivers to install raw handlers for
     ACPI GPEs which then become entirely responsible for the given GPE
     and the ACPICA core code won't touch it (Lv Zheng, David E Box,
     Octavian Purdila).

   - ACPI EC driver rework to fix several concurrency issues and other
     problems related to events handling on top of the ACPICA's new
     support for raw GPE handlers (Lv Zheng).

   - New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power
     Subsystem) driver for Intel chips (Ken Xue).

   - Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko
     Nikula).

   - Two new blacklist entries for machines (Samsung 730U3E/740U3E and
     510R) where the native backlight interface doesn't work correctly
     while the ACPI one does (Hans de Goede).

   - Rework of the ACPI processor driver's handling of idle states to
     make the code more straightforward and less bloated overall (Rafael
     J Wysocki).

   - Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht,
     Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei
     Bai).

   - PCI core power management modification to avoid resuming (some)
     runtime-suspended devices during system suspend if they are in the
     right states already (Rafael J Wysocki).

   - New SFI-based cpufreq driver for Intel platforms using SFI
     (Srinidhi Kasagar).

   - cpufreq core fixes, cleanups and simplifications (Viresh Kumar,
     Doug Anderson, Wolfram Sang).

   - SkyLake CPU support and other updates for the intel_pstate driver
     (Kristen Carlson Accardi, Srinivas Pandruvada).

   - cpufreq-dt driver cleanup (Markus Elfring).

   - Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla).

   - Generic power domains core code fixes and cleanups (Ulf Hansson).

   - Operating Performance Points (OPP) core code cleanups and kernel
     documentation update (Nishanth Menon).

   - New dabugfs interface to make the list of PM QoS constraints
     available to user space (Nishanth Menon).

   - New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso).

   - New devfreq class (devfreq_event) to provide raw utilization data
     to devfreq governors (Chanwoo Choi).

   - Assorted minor fixes and cleanups related to power management
     (Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel
     Machek, Todd E Brandt, Wonhong Kwon).

   - turbostat updates (Len Brown) and cpupower Makefile improvement
     (Sriram Raghunathan)"

* tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits)
  tools/power turbostat: relax dependency on APERF_MSR
  tools/power turbostat: relax dependency on invariant TSC
  Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources
  tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS
  tools/power turbostat: relax dependency on root permission
  ACPI / video: Add disable_native_backlight quirk for Samsung 510R
  ACPI / PM: Remove unneeded nested #ifdef
  USB / PM: Remove unneeded #ifdef and associated dead code
  intel_pstate: provide option to only use intel_pstate with HWP
  ACPI / EC: Add GPE reference counting debugging messages
  ACPI / EC: Add query flushing support
  ACPI / EC: Refine command storm prevention support
  ACPI / EC: Add command flushing support.
  ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag
  ACPI: add AMD ACPI2Platform device support for x86 system
  ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse()
  ACPI / EC: Update revision due to raw handler mode.
  ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp.
  ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode.
  ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model
  ...
2015-02-10 15:09:41 -08:00
Chanwoo Choi
e6ee319247 devfreq: Fix build break of devfreq-event class
This patch fixes the build break of the exynos-ppmu driver because Makefile
in drivers/devfreq don't include the entry of devfreq-event.c driver.

The original patch[1] includes the entry to build devfreq-event.c without
the build break. This build break is generated in the process of merging the
patch.
[1] https://lkml.org/lkml/2015/1/25/579
- [PATCH v10 1/7] devfreq: event: Add new devfreq_event class to provide basic
                  data for devfreq governor

CC      init/version.o
LD      init/built-in.o
drivers/built-in.o: In function `exynos_ppmu_probe':
binder.c:(.text+0x4447ec): undefined reference to `devm_devfreq_event_add_edev'
make: *** [vmlinux] Error 1

Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-01-30 17:56:41 +09:00
Chanwoo Choi
f262f28c14 PM / devfreq: event: Add devfreq_event class
This patch adds a new class in devfreq, devfreq_event, which provides
raw data (e.g., memory bus utilization, GPU utilization) for devfreq
governors.

- devfreq_event device : Provides raw data for a governor of a devfreq device
- devfreq device       : Monitors device state and changes frequency/voltage
			of the device using the raw data from its
			devfreq_event device.

A devfreq device dertermines performance states (normally the frequency
and the voltage vlues) based on the results its designtated devfreq governor:
e.g., ondemand, performance, powersave.

In order to give such results required by a devfreq device, the devfreq
governor requires data that indicates the performance requirement given
to the devfreq device. The conventional (previous) implementatino of
devfreq subsystem requires a devfreq device driver to implement its own
mechanism to acquire performance requirement for its governor. However,
there had been issues with such requirements:

1. Although performance requirement of such devices is usually acquired
 from common devices (PMU/PPMU), we do not have any abstract structure to
 represent them properly.
2. Such performance requirement devices (PMU/PPMU) are actual hardware
 pieces that may be represented by Device Tree directly while devfreq device
 itself is a virtual entity that are not considered to be represented by
 Device Tree according to Device Tree folks.

In order to address such issues, a devferq_event device (represented by
this patch) provides a template for device drivers representing
performance monitoring unit, which gives the basic or raw data for
preformance requirement, which in turn, is required by devfreq governors.

The following description explains the feature of two kind of devfreq class:
- devfreq class (existing)
 : devfreq consumer device use raw data from devfreq_event device for
   determining proper current system state and change voltage/frequency
   dynamically using various governors.

- devfreq_event class (new)
 : Provide measured raw data to devfreq device for governor

Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[Commit message rewritten & conflict resolved by MyungJoo]
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-30 17:56:40 +09:00
Tomeu Vizoso
6234f38016 PM / devfreq: tegra: add devfreq driver for Tegra Activity Monitor
The ACTMON block can monitor several counters, providing averaging and firing
interrupts based on watermarking configuration. This implementation monitors
the MCALL and MCCPU counters to choose an appropriate frequency for the
external memory clock.

This patch is based on work by Alex Frid <afrid@nvidia.com> and Mikko
Perttunen <mikko.perttunen@kapsi.fi>.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-29 21:25:48 +09:00
Pranith Kumar
83fe27ea53 rcu: Make SRCU optional by using CONFIG_SRCU
SRCU is not necessary to be compiled by default in all cases. For tinification
efforts not compiling SRCU unless necessary is desirable.

The current patch tries to make compiling SRCU optional by introducing a new
Kconfig option CONFIG_SRCU which is selected when any of the components making
use of SRCU are selected.

If we do not select CONFIG_SRCU, srcu.o will not be compiled at all.

   text    data     bss     dec     hex filename
   2007       0       0    2007     7d7 kernel/rcu/srcu.o

Size of arch/powerpc/boot/zImage changes from

   text    data     bss     dec     hex filename
 831552   64180   23944  919676   e087c arch/powerpc/boot/zImage : before
 829504   64180   23952  917636   e0084 arch/powerpc/boot/zImage : after

so the savings are about ~2000 bytes.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
CC: Josh Triplett <josh@joshtriplett.org>
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: resolve conflict due to removal of arch/ia64/kvm/Kconfig. ]
2015-01-06 11:04:29 -08:00
Wolfram Sang
c4456c1701 devfreq: exynos: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:20:27 +02:00
Punit Agrawal
81da57e649 PM / devfreq: exynos: Enable building exynos PPMU as module
Export symbols from the PPMU driver needed to build the exynos bus
driver as a module.

Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-09-29 20:22:36 +09:00