Commit Graph

390 Commits

Author SHA1 Message Date
Linus Torvalds
c32da02342 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits)
  doc: fix typo in comment explaining rb_tree usage
  Remove fs/ntfs/ChangeLog
  doc: fix console doc typo
  doc: cpuset: Update the cpuset flag file
  Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed
  Remove drivers/parport/ChangeLog
  Remove drivers/char/ChangeLog
  doc: typo - Table 1-2 should refer to "status", not "statm"
  tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments
  No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h
  devres/irq: Fix devm_irq_match comment
  Remove reference to kthread_create_on_cpu
  tree-wide: Assorted spelling fixes
  tree-wide: fix 'lenght' typo in comments and code
  drm/kms: fix spelling in error message
  doc: capitalization and other minor fixes in pnp doc
  devres: typo fix s/dev/devm/
  Remove redundant trailing semicolons from macros
  fix typo "definetly" -> "definitely" in comment
  tree-wide: s/widht/width/g typo in comments
  ...

Fix trivial conflict in Documentation/laptops/00-INDEX
2010-03-12 16:04:50 -08:00
Linus Torvalds
dca1d9f6d7 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
  ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
  ARM: S3C2443: Remove #if 0 for clk_mpll
  ARM: S3C2443: Update notes on MPLLREF clock
  ARM: S3C2443: Further clksrc-clk conversions
  ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
  USB: Fix s3c-hsotg build following Samsung platform header moves
  ARM: S3C64XX: Reintroduce unconditional build of audio device
  ARM: 5961/1: ux500: fix CLKRST addresses
  ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
  ASoC: Fix S3C64xx IIS driver for Samsung header reorg
  ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
  [ARM] pxa: fix typo in mxm8x10.h
  [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
  [ARM] pxa/zeus: Add support for mcp2515 CAN bus
  [ARM] pxa/zeus: Add support for onboard max6369 watchdog
  [ARM] pxa/zeus: Add Eurotech as the manufacturer
  [ARM] pxa/zeus: Correct the USB host initialisation flags
  [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
  [ARM] pxa: refactor uncompress.h for non-PXA uarts
  [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
  ...
2010-03-12 16:00:54 -08:00
Russell King
988addf82e Merge branch 'origin' into devel-stable
Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c
2010-03-08 20:21:04 +00:00
Jiri Kosina
318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
Uwe Kleine-König
91a99dfc6b platform-drivers: move probe to .devinit.text in arch/arm
A pointer to a probe callback is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Cc: Paul Sokolovsky <pmiscml@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:50 -08:00
Ben Dooks
3b05007e43 ARM: Merge next-samsung-s3c2443-clock
Merge branch 'next-samsung-s3c2443-clock' into next-samsung
2010-03-07 22:56:19 +00:00
Ben Dooks
4bed36b2c5 ARM: S3C2443: Further clksrc-clk conversions
Move more of the core clocks that where left over from the last commit
as they are much more core to the system operation. This should allow
for easier tracking of any problems.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-07 22:56:11 +00:00
Ben Dooks
9aa753c442 ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
The S3C2443 clock code could easily make use of the clksrc implementation
in plat-samsung for many of the clocks. Make the clocks that easily move
to clksrc-clk over, update any initialisation and remove the old register
definitions from the header file (it is only being used once).

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-07 22:56:07 +00:00
Jassi Brar
bc449e5312 ARM: S3C2443: GPIO: Correct AC97 pin defines
GPIO_E-[5,9] pin functionality was defined incorrectly.
The patch corrects and adds missing pins.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-24 01:58:17 +00:00
Ben Dooks
f94327f2ce ARM: SAMSUNG: Move include/mach files out of plat-s3c
Move the include/mach files out of plat-s3c and into the relevant
machine files. This does mean copying the files, but there is nowhere
else to put them.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-24 01:52:12 +00:00
Ben Dooks
992426bfe9 ARM: SAMSUNG: Remove dma-plat.h to allow plat-s3c64xx to be removed
dma-plat.h is the last file left in plat-s3c64xx, but to remove it we
must also change the use of dma-plat.h by the core code and the s3c24xx
implementation.

Rename the s3c24xx dma-plat.h in the common plat-samsung directory as it
may be used for other ports. Move the specific dma bits into the
mach-s3c64xx directory and update the build as needed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-21 23:10:35 +00:00
Ben Dooks
431fb7df24 ARM: SAMSUNG: Move pm-core.h to machine directory
Move the pm-core.h to the machine include directory in the process of
eliminating the plat-s3c64xx.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-20 22:34:03 +00:00
Tony Lindgren
4e6d488af3 ARM: 5910/1: ARM: Add tmp register for addruart and loadsp
Otherwise more complicated uart configuration won't be possible.
We can use r1 for tmp register for both head.S and debug.S.

NOTE: This patch depends on another patch to add the the tmp register
into all debug-macro.S files. That can be done with:

$ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/"
	arch/arm/*/include/*/debug-macro.S

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 17:27:52 +00:00
Stefan Weil
947af29435 Fix spelling of 'platform' in comments and doc
Replace platfrom -> platform.

This is a frequent spelling bug.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-05 12:22:34 +01:00
Ben Dooks
e856bb1f8d ARM: SAMSUNG: Remove empty gpio-core.h and use central plat/gpio-core.h
Rename mach-s3c2410/include/mach/gpio-core.h to mach/gpio-track.h so that
it can be included by <plat/gpio-core.h> when needed.

Eliminate all other empty gpio-core.h files and just include the
<plat/gpio-core.h> as necessary.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19 18:46:02 +09:00
Ben Dooks
22c810ab3e ARM: S3C24XX: Add mci platform data set call s3c24xx_mci_set_platdata().
Add a s3c24xx_mci_set_platdata() call for all the machine files that have
platform data for the MCI driver. This brings the MCI device into line with
the other devices with __initdata and a specific call to ensure the right
structure type is being passed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19 17:21:38 +09:00
Ben Dooks
f126752043 ARM: SAMSUNG: Add platform data registration for OHCI
Add a platform data helper for the OHCI device

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19 09:23:51 +09:00
Ben Dooks
b813248c61 ARM: S3C: Rename s3c_device_usb to s3c_device_ohci
Prepare for the forthcoming device changes by renaming s3c_device_usb to
s3c_device_ohci as this is what the device represents.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 19:33:19 +09:00
Arnaud Patard
ce8877b542 ARM: S3C24XX: touchscreen device definition
Add definition for the touchscreen driver platform data and initial
support for the H1940 machine.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-23 19:28:12 +00:00
Ben Dooks
d3ef7ee4a7 ARM: mach-bast: add NAND_SCAN_SILENT_NODEV to optional devices
Add the NAND_SCAN_SILENT_NODEV to the optional NAND devices that may not
be fitted to the board

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-23 19:28:11 +00:00
Linus Torvalds
bf931a01a2 Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6:
  spi: spi_txx9.c: use resource_size()
  spi: spi_sh_sci.c: use resource_size()
  spi: spi_mpc8xxx.c: use resource_size()
  spi: spi_bfin5xx.c: use resource_size()
  spi: atmel_spi.c: use resource_size()
  spi: Add s3c64xx SPI Controller driver
  atmel_spi: fix dma addr calculation for len > BUFFER_SIZE
  spi_s3c24xx: add FIQ pseudo-DMA support
  spi: controller driver for Designware SPI core
  spidev: add proper section markers
  spidev: use DECLARE_BITMAP instead of declaring the array
2009-12-17 15:59:05 -08:00
Ben Dooks
bec0806cfe spi_s3c24xx: add FIQ pseudo-DMA support
Add pseudo-DMA by FIQ to the S3C24XX SPI driver.  This allows the driver
to get DMA-like performance where there are either no free DMA channels or
when doing transfers that required both TX and RX data paths.

Since this patch requires the addition of an assembly file to hold the FIQ
code, we rename the module (instead of adding a rename of the .c file to
this patch).  We expect most users are loading this via udev and thus
there should be no change to the userland configuration.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17 08:57:01 -07:00
Linus Torvalds
4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Ben Dooks
f18ea8276b ARM: Merge next-s3c24xx-dev-rtp
Merge branch 'next-s3c24xx-dev-rtp' into for-rmk

Conflicts:

	arch/arm/mach-s3c2440/mach-anubis.c
2009-12-03 21:33:01 +00:00
arnaud.patard@rtp-net.org
1a71e4ade1 ARM: H1940: Convert h1940 bluetooth driver to rfkill
Better using standard interfaces to enable/disable bluetooth

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:35:06 +00:00
arnaud.patard@rtp-net.org
22e649ff2e ARM: H1940: add lcd/backlight device definition
Add lcd and backlight device definition. The pwm backlight stuff does
not allow to really set maximum pwm as with my custom driver but it's
better to use standard driver instead of out of tree driver.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
[ben-linux@fluff.org: tidy header]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:35:05 +00:00
arnaud.patard@rtp-net.org
13733d524d ARM: H1940: enable rtc
Enable S3C2410 rtc on h1940

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
[ben-linux@fluff.org: tidy header]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:35:05 +00:00
arnaud.patard@rtp-net.org
3909b9f7a3 ARM: H1940: add mmc device
Add mmc host support to h1940

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
[ben-linux@fluff.org: tidy description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:35:04 +00:00
Ben Dooks
7bcb7eda99 ARM: N30: Use s3c_i2c0_set_platdata() to set I2C platform data
Fix mach-n30.c to use the s3c_i2c0_set_platdata() call to register the
platform data with the system to get rid of any reliance on having a real
device structure available in memory.

Since s3c_i2c0_set_platdata() copies the data, mark the original as
__initdata so it is thrown away.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:34:17 +00:00
Ben Dooks
2a3a18045b ARM: S3C: Add NAND device platform data set call 2009-12-01 01:34:16 +00:00
Ben Dooks
ff34aaa953 ARM: H1940: Correct name of the local platform devices for LED and Bluetooth
The mach-h1940.c file was using s3c_device_ where it really should be
calling these local definitions h1940_device to ensure they are not
mistaken for real s3c_devices when the device change is done.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:34:16 +00:00
Ben Dooks
ccae941ee2 ARM: S3C: Update Simtec copyright statements from , to - [2]
There are a number of statements of the form A, B or A, B, C where
the numbers A,B,C are not consecutive. However, referencing [1] it
is the correct thing to replace these with A-B or A-C as apropriate.

[1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices
    section 4iii 'Year of publication'

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:33:51 +00:00
Ben Dooks
e02f866456 ARM: S3C: Update Simtec copyright statements from , to -
There are a number of statements of the form A, B or A, B, C where
the numbers A,B,C are consecutive. Tidy these up to be A-B or A-C
as appropriate and to comply better with copyright standards [1]

[1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices
    section 4iii 'Year of publication'

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:33:51 +00:00
Ben Dooks
50f430e3ad ARM: S3C: Fix Simtec copyright statements in Documentation/S3C24XX
The (c) alone is not a sufficient copyright statement, nor is it a
good replacement for the proper encircled &copy; symbol [1]. Add the
word copyright to the apropriate places and remove the (c) symbol.

[1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices
    section 4 'What does a notice consist of?'

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:33:50 +00:00
Ben Dooks
4d3a3469db ARM: S3C24XX: machine support for Simtec Audio
Add the platform/machine support for the audio devices fitted to
the Simtec range of boards since the move to ASoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01 01:33:48 +00:00
Michael Roth
fa3012318b Kconfig: Remove useless and sometimes wrong comments
Additionally, some excessive newlines removed.

Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-09 09:40:56 +01:00
Ben Dooks
620abe2877 ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.c
Fix sparse warning in arch/arm/mach-s3c2410/gpio.c due to missing
include of <mach/gpio-fns.h>. Fixes the following warning:

warning: symbol 's3c2410_gpio_irqfilter' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28 18:34:56 +00:00
Ben Dooks
e3d8024891 ARM: S3C: Add info for supporting circular DMA buffers
The S3C64XX DMA implementation will work a lot better with the ability
to enqueue circular buffers as the hardware can do it's own linked-list
management.

Add a function s3c_dma_has_circular() to show that the system can do this
and a flag for the channel.

Update the s3c24xx/s3c64xx I2S DMA code to deal with this.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Mark Brown <broonie@@opensource.wolfsonmicro.com>
2009-10-28 18:22:57 +00:00
Ben Dooks
d23b351740 ARM: S3C: Add missing selection of S3C_DEV_NAND in machine Kconfigs.
A number of machines that need s3c_device_nand present do not select
this in their Kconfig entries. Add the necessary selection of the
configuration S3C_DEV_NAND so that we avoid the following error:

arch/arm/mach-s3c2410/built-in.o: In function `bast_map_io':
arch/arm/mach-s3c2410/mach-bast.c:634: undefined reference to `s3c_device_nand'
arch/arm/mach-s3c2412/built-in.o: In function `s3c2412_init_uarts':
arch/arm/mach-s3c2412/s3c2412.c:109: undefined reference to `s3c_device_nand'
arch/arm/mach-s3c2412/built-in.o: In function `jive_machine_init':
arch/arm/mach-s3c2412/mach-jive.c:673: undefined reference to `s3c_device_nand'

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-09-17 10:12:28 +01:00
Ben Dooks
b282e29b54 Merge branch 'next-s3c64xx-moves' into next-s3c 2009-08-14 15:24:06 +01:00
Ben Dooks
215ed3236a Merge branch 'next-s3c24xx-cpufreq' into next-s3c 2009-08-14 15:23:45 +01:00
Ben Dooks
0fbdd27007 Merge branch 'next-s3c24xx' into next-s3c 2009-08-14 15:23:34 +01:00
Ben Dooks
63c949ea1d Merge branch 'next-s3c-hwmon' into next-s3c 2009-08-14 15:23:15 +01:00
Ben Dooks
a2c195fdde ARM: S3C24XX: Add SPI bus 1 on GPD8 through GPD10
Add configuration callback for SPI bus 1 on GPD[8..10] and ensure the
correct GPIO configuration register definitions in regs-gpio.h

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-14 01:26:09 +01:00
Mark Brown
d91e9a7ab9 ARM: S3C24XX: Add platform device for AC97 controller
Move the definition of the "generic" IRQ in the process.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-14 01:13:29 +01:00
Peter Korsgaard
14077ea63b ARM: S3C: move s3c_device_nand from plat-s3c24xx to plat-s3c
Move the s3c_device_nand platform device from plat-s3c24xx to plat-s3c,
now that the nand driver also support the s3c64xx devices.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-31 00:10:24 +01:00
Ben Dooks
e6d197a695 ARM: S3C: CPUFREQ: Add debugfs support for cpufreq
Add debugfs support for the cpufreq driver to allow
information about the system state to be exported to
the user.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:56 +01:00
Ben Dooks
ad78759529 ARM: S3C2410: Add armclk for cpufreq support
Add armclk for use with the cpufreq support and anything
else that may want it. This clock is just a direct
descendant of fclk.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:55 +01:00
Ben Dooks
ca0b4901d8 ARM: BAST: CPUFREQ: Add board support
Add board support for CPUFREQ with the Simtec BAST board
registering the necessary information with the core.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:55 +01:00
Ben Dooks
f0176794b6 ARM: S3C2410: Add S3C2410A sysdev.
Add a sysdev S3C2410A sysdev to allow the differentiation
of the S3C2410A from the S3C2410. This is needed for the
CPUFREQ code to enable the extra features and update cpu
specific information.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:55 +01:00