Commit Graph

21772 Commits

Author SHA1 Message Date
Catherine Zhang
e6f507196c [SELINUX]: selinux_socket_getpeer_{stream,dgram} fixup
Signed-off-by: Catherine Zhang <cxzhang@watson.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-03-20 22:49:00 -08:00
Arnaldo Carvalho de Melo
543d9cfeec [NET]: Identation & other cleanups related to compat_[gs]etsockopt cset
No code changes, just tidying up, in some cases moving EXPORT_SYMBOLs
to just after the function exported, etc.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:48:35 -08:00
Arnaldo Carvalho de Melo
f94691acf9 [SK_BUFF]: export skb_pull_rcsum
*** Warning: "skb_pull_rcsum" [net/bridge/bridge.ko] undefined!
*** Warning: "skb_pull_rcsum" [net/8021q/8021q.ko] undefined!
*** Warning: "skb_pull_rcsum" [drivers/net/pppoe.ko] undefined!
*** Warning: "skb_pull_rcsum" [drivers/net/ppp_generic.ko] undefined!

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:47:55 -08:00
Arnaldo Carvalho de Melo
c841aa0304 [SECURITY] getpeersec: Fix build breakage
A recent changeset removes dummy_socket_getpeersec, replacing it with
two new functions, but still references the removed function in the
security_fixup_ops table, fix it by doing the replacement operation in
the fixup table too.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:47:37 -08:00
Arnaldo Carvalho de Melo
e35fc38565 [INFINIBAND] ipoib: Remove leftover use of neigh_ops->destructor
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:46:40 -08:00
Arnaldo Carvalho de Melo
dec73ff029 [ICSK] compat: Introduce inet_csk_compat_[gs]etsockopt
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:46:16 -08:00
Arnaldo Carvalho de Melo
d1d47beef8 [SNAP]: Remove leftover unused hdr variable
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:45:37 -08:00
Dmitry Mishin
3fdadf7d27 [NET]: {get|set}sockopt compatibility layer
This patch extends {get|set}sockopt compatibility layer in order to
move protocol specific parts to their place and avoid huge universal
net/compat.c file in the future.

Signed-off-by: Dmitry Mishin <dim@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:45:21 -08:00
Dave Jones
c750360938 [IPV6]: remove useless test in ip6_append_data
We've already dereferenced 'np' a dozen
times at this point, so it's safe to say it's not null.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:44:52 -08:00
Adrian Bunk
afb5bb5744 [PKT_SCHED]: Let NET_CLS_ACT no longer depend on EXPERIMENTAL
This option should IMHO no longer depend on EXPERIMENTAL.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
ACKed-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:44:24 -08:00
Herbert Xu
cbb042f9e1 [NET]: Replace skb_pull/skb_postpull_rcsum with skb_pull_rcsum
We're now starting to have quite a number of places that do skb_pull
followed immediately by an skb_postpull_rcsum.  We can merge these two
operations into one function with skb_pull_rcsum.  This makes sense
since most pull operations on receive skb's need to update the
checksum.

I've decided to make this out-of-line since it is fairly big and the
fast path where hardware checksums are enabled need to call
csum_partial anyway.

Since this is a brand new function we get to add an extra check on the
len argument.  As it is most callers of skb_pull ignore its return
value which essentially means that there is no check on the len
argument.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:43:56 -08:00
Steven Whitehouse
ecba320f2e [DECnet]: Use RCU locking in dn_rules.c
As per Robert Olsson's patch for ipv4, this is the DECnet
version to keep the code "in step". It changes the list
of rules to use RCU rather than an rwlock.

Inspired-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: Steven Whitehouse <steve@chygwyn.com>
Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:43:28 -08:00
Patrick Caulfield
c60992db46 [DECnet]: Patch to fix recvmsg() flag check
This patch means that 64bit kernel/32bit userland platforms will now
work correctly with DECnet.

Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: Steven Whitehouse <steve@chygwyn.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:43:05 -08:00
Steven Whitehouse
c4ea94ab37 [DECnet]: Endian annotation and fixes for DECnet.
The typedef for dn_address has been removed in favour of using __le16
or __u16 directly as appropriate. All the DECnet header files are
updated accordingly.

The byte ordering of dn_eth2dn() and dn_dn2eth() are both changed
since just about all their callers wanted network order rather than
host order, so the conversion is now done in the functions themselves.

Several missed endianess conversions have been picked up during the
conversion process. The nh_gw field in struct dn_fib_info has been
changed from a 32 bit field to 16 bits as it ought to be.

One or two cases of using htons rather than dn_htons in the routing
code have been found and fixed.

There are still a few warnings to fix, but this patch deals with the
important cases.

Signed-off-by: Steven Whitehouse <steve@chygwyn.com>
Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:42:39 -08:00
Catherine Zhang
2c7946a7bf [SECURITY]: TCP/UDP getpeersec
This patch implements an application of the LSM-IPSec networking
controls whereby an application can determine the label of the
security association its TCP or UDP sockets are currently connected to
via getsockopt and the auxiliary data mechanism of recvmsg.

Patch purpose:

This patch enables a security-aware application to retrieve the
security context of an IPSec security association a particular TCP or
UDP socket is using.  The application can then use this security
context to determine the security context for processing on behalf of
the peer at the other end of this connection.  In the case of UDP, the
security context is for each individual packet.  An example
application is the inetd daemon, which could be modified to start
daemons running at security contexts dependent on the remote client.

Patch design approach:

- Design for TCP
The patch enables the SELinux LSM to set the peer security context for
a socket based on the security context of the IPSec security
association.  The application may retrieve this context using
getsockopt.  When called, the kernel determines if the socket is a
connected (TCP_ESTABLISHED) TCP socket and, if so, uses the dst_entry
cache on the socket to retrieve the security associations.  If a
security association has a security context, the context string is
returned, as for UNIX domain sockets.

- Design for UDP
Unlike TCP, UDP is connectionless.  This requires a somewhat different
API to retrieve the peer security context.  With TCP, the peer
security context stays the same throughout the connection, thus it can
be retrieved at any time between when the connection is established
and when it is torn down.  With UDP, each read/write can have
different peer and thus the security context might change every time.
As a result the security context retrieval must be done TOGETHER with
the packet retrieval.

The solution is to build upon the existing Unix domain socket API for
retrieving user credentials.  Linux offers the API for obtaining user
credentials via ancillary messages (i.e., out of band/control messages
that are bundled together with a normal message).

Patch implementation details:

- Implementation for TCP
The security context can be retrieved by applications using getsockopt
with the existing SO_PEERSEC flag.  As an example (ignoring error
checking):

getsockopt(sockfd, SOL_SOCKET, SO_PEERSEC, optbuf, &optlen);
printf("Socket peer context is: %s\n", optbuf);

The SELinux function, selinux_socket_getpeersec, is extended to check
for labeled security associations for connected (TCP_ESTABLISHED ==
sk->sk_state) TCP sockets only.  If so, the socket has a dst_cache of
struct dst_entry values that may refer to security associations.  If
these have security associations with security contexts, the security
context is returned.

getsockopt returns a buffer that contains a security context string or
the buffer is unmodified.

- Implementation for UDP
To retrieve the security context, the application first indicates to
the kernel such desire by setting the IP_PASSSEC option via
getsockopt.  Then the application retrieves the security context using
the auxiliary data mechanism.

An example server application for UDP should look like this:

toggle = 1;
toggle_len = sizeof(toggle);

setsockopt(sockfd, SOL_IP, IP_PASSSEC, &toggle, &toggle_len);
recvmsg(sockfd, &msg_hdr, 0);
if (msg_hdr.msg_controllen > sizeof(struct cmsghdr)) {
    cmsg_hdr = CMSG_FIRSTHDR(&msg_hdr);
    if (cmsg_hdr->cmsg_len <= CMSG_LEN(sizeof(scontext)) &&
        cmsg_hdr->cmsg_level == SOL_IP &&
        cmsg_hdr->cmsg_type == SCM_SECURITY) {
        memcpy(&scontext, CMSG_DATA(cmsg_hdr), sizeof(scontext));
    }
}

ip_setsockopt is enhanced with a new socket option IP_PASSSEC to allow
a server socket to receive security context of the peer.  A new
ancillary message type SCM_SECURITY.

When the packet is received we get the security context from the
sec_path pointer which is contained in the sk_buff, and copy it to the
ancillary message space.  An additional LSM hook,
selinux_socket_getpeersec_udp, is defined to retrieve the security
context from the SELinux space.  The existing function,
selinux_socket_getpeersec does not suit our purpose, because the
security context is copied directly to user space, rather than to
kernel space.

Testing:

We have tested the patch by setting up TCP and UDP connections between
applications on two machines using the IPSec policies that result in
labeled security associations being built.  For TCP, we can then
extract the peer security context using getsockopt on either end.  For
UDP, the receiving end can retrieve the security context using the
auxiliary data mechanism of recvmsg.

Signed-off-by: Catherine Zhang <cxzhang@watson.ibm.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:41:23 -08:00
Patrick McHardy
be33690d8f [XFRM]: Fix aevent related crash
When xfrm_user isn't loaded xfrm_nl is NULL, which makes IPsec crash because
xfrm_aevent_is_on passes the NULL pointer to netlink_has_listeners as socket.
A second problem is that the xfrm_nl pointer is not cleared when the socket
is releases at module unload time.

Protect references of xfrm_nl from outside of xfrm_user by RCU, check
that the socket is present in xfrm_aevent_is_on and set it to NULL
when unloading xfrm_user.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:40:54 -08:00
Rick Jones
15d99e02ba [TCP]: sysctl to allow TCP window > 32767 sans wscale
Back in the dark ages, we had to be conservative and only allow 15-bit
window fields if the window scale option was not negotiated.  Some
ancient stacks used a signed 16-bit quantity for the window field of
the TCP header and would get confused.

Those days are long gone, so we can use the full 16-bits by default
now.

There is a sysctl added so that we can still interact with such old
stacks

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:40:29 -08:00
Neil Horman
c1b1bce852 [IPV4] ARP: Documentation for new arp_accept sysctl variable.
As John pointed out, I had not added documentation to describe the
arp_accpet sysctl that I posted in my last patch.  This patch adds
that documentation.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:40:03 -08:00
Neil Horman
abd596a4b6 [IPV4] ARP: Alloc acceptance of unsolicited ARP via netdevice sysctl.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:39:47 -08:00
Jeff Mahoney
59f1741e54 [TG3]: netif_carrier_off runs too early; could still be queued when init fails
Move the netif_carrier_off() call from tg3_init_one()->
tg3_init_link_config() to tg3_open() as is the convention for most other
network drivers.

I was getting a panic after a tg3 device failed to initialize due to DMA
failure.  The oops pointed to the link watch queue with spinlock debugging
enabled.  Without spinlock debugging, the Oops didn't occur.

I suspect that the link event was getting queued but not executed until
after the DMA test had failed and the device was freed.  The link event was
then operating on freed memory, which could contain anything.  With this
patch applied, the Oops no longer occurs.

[ Based upon feedback from Michael Chan, we move netif_carrier_off()
  to the end of tg3_init_one() instead of moving it to tg3_open() -DaveM ]

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:39:21 -08:00
Per Liden
87546b1c25 [TIPC]: Avoid compiler warning
Signed-off-by: Per Liden <per.liden@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:38:33 -08:00
Per Liden
de70c5ba43 [TIPC]: Reduce stack usage
The node_map struct can be quite large (516 bytes) and allocating two of
them on the stack is not a good idea since we might only have a 4K stack
to start with.

Signed-off-by: Per Liden <per.liden@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:38:14 -08:00
Adrian Bunk
988f088a8e [TIPC]: Cleanups
This patch contains the following possible cleanups:
- make needlessly global code static
- #if 0 the following unused global functions:
  - name_table.c: tipc_nametbl_print()
  - name_table.c: tipc_nametbl_dump()
  - net.c: tipc_net_next_node()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Per Liden <per.liden@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:37:52 -08:00
Per Liden
7c501a5960 [TIPC]: Remove unused functions
Signed-off-by: Per Liden <per.liden@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:37:27 -08:00
Sam Ravnborg
05790c6456 [TIPC]: Remove inlines from *.c
With reference to latest discussions on linux-kernel with respect to
inline here is a patch for tipc to remove all inlines as used in
the .c files. See also chapter 14 in Documentation/CodingStyle.

Before:
   text        data     bss     dec     hex filename
 102990        5292    1752  110034   1add2 tipc.o

Now:
   text        data     bss     dec     hex filename
 101190        5292    1752  108234   1a6ca tipc.o

This is a nice text size reduction which will improve icache usage.
In some cases bigger (> 4 lines) functions where declared inline
and used in many places, they are most probarly no longer inlined by gcc
resulting in the size reduction.
There are several one liners that no longer are declared inline, but gcc
should inline these just fine without the inline hint.

With this patch applied one warning is added about an unused static
function - that was hidded by utilising inline before.
The function in question were kept so this patch is solely a
inline removal patch.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Per Liden <per.liden@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:37:04 -08:00
Sam Ravnborg
1fc54d8f49 [TIPC]: Fix simple sparse warnings
Tried to run the new tipc stack through sparse.
Following patch fixes all cases where 0 was used
as replacement of NULL.
Use NULL to document this is a pointer and to silence sparse.

This brough sparse warning count down with 127 to 24 warnings.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Per Liden <per.liden@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:36:47 -08:00
David S. Miller
edb2c34fb2 [NETFILTER]: Fix warnings in ip_nat_snmp_basic.c
net/ipv4/netfilter/ip_nat_snmp_basic.c: In function 'asn1_header_decode':
net/ipv4/netfilter/ip_nat_snmp_basic.c:248: warning: 'len' may be used uninitialized in this function
net/ipv4/netfilter/ip_nat_snmp_basic.c:248: warning: 'def' may be used uninitialized in this function
net/ipv4/netfilter/ip_nat_snmp_basic.c: In function 'snmp_translate':
net/ipv4/netfilter/ip_nat_snmp_basic.c:672: warning: 'l' may be used uninitialized in this function
net/ipv4/netfilter/ip_nat_snmp_basic.c:668: warning: 'type' may be used uninitialized in this function

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:36:21 -08:00
David S. Miller
fb9504964d [DCCP]: Fix uninitialized var warnings in dccp_parse_options().
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:36:01 -08:00
Ingo Molnar
57b47a53ec [NET]: sem2mutex part 2
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:35:41 -08:00
Alexey Dobriyan
6613f82dd2 [ATM] suni: cast arg properly in SONET_SETFRAMING
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:35:16 -08:00
Sam Ravnborg
471a24c058 [WAN]: fix section mismatch warning in sbni
In latest -mm sbni gives following warning: WARNING:
drivers/net/wan/sbni.o - Section mismatch: reference to \ .init.data:
from .text between 'init_module' (at offset 0x14ef) and \
'cleanup_module'

The warning is caused by init_module() calling a function declared
__init.  Declare init_module() __init too to fix warning.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:34:52 -08:00
Ingo Molnar
e3968fc0f3 [SUNGEM]: sem2mutex
Semaphore to mutexes conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:34:25 -08:00
Ingo Molnar
758df69ee0 [CASSINI]: sem2mutex
Semaphore to mutexes conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:34:09 -08:00
Andrew Morton
73a6c63068 [IRDA]: remove MODULE_PARM()
MODULE_PARM() is deprecated and is about to go away altogether.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:33:41 -08:00
Arjan van de Ven
4a3e2f711a [NET] sem2mutex: net/
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:33:17 -08:00
Arjan van de Ven
d4ccd08cdf [IRDA] sem2mutex: drivers/net/irda
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:32:53 -08:00
Stephen Hemminger
1533306186 [NET]: dev_put/dev_hold cleanup
Get rid of the old __dev_put macro that is just a hold over from pre 2.6
kernel.  And turn dev_hold into an inline instead of a macro.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:32:28 -08:00
Arnaldo Carvalho de Melo
2d0817d11e [DCCP] options: Make dccp_insert_options & friends yell on error
And not the silly LIMIT_NETDEBUG and silently return without inserting
the option requested.

Also drop some old debugging messages associated to option insertion.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:32:06 -08:00
Arnaldo Carvalho de Melo
110bae4efb [DCCP]: Remove leftover dccp_send_response prototype
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:31:46 -08:00
Arnaldo Carvalho de Melo
c5fed1597e [DCCP]: ditch dccp_v[46]_ctl_send_ack
Merging it with its only user: dccp_v[46]_reqsk_send_ack.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:31:26 -08:00
Arnaldo Carvalho de Melo
118b2c9532 [DCCP]: Use sk->sk_prot->max_header consistently for non-data packets
Using this also provides opportunities for introducing
inet_csk_alloc_skb that would call alloc_skb, account it to the sock
and skb_reserve(max_header), but I'll leave this for later, for now
using sk_prot->max_header consistently is enough.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:31:09 -08:00
Arnaldo Carvalho de Melo
e5a6de915b [DCCP] options: Fix handling of ackvecs in DATA packets
I.e. they should be just ignored, but we have to use 'break', not 'continue',
as we have to possibly reset the mandatory flag.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:30:51 -08:00
David S. Miller
aa837b5bbd [ATM]: Fix build after neigh->parms->neigh_destructor change.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:30:23 -08:00
Michael Chan
e9e678006e [TG3]: update version and reldate
Update version to 3.52.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:29:52 -08:00
Michael Chan
c4e6575c78 [TG3]: Add firmware version info
Add fw_version information to ethtool -i.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:29:32 -08:00
Michael Chan
1820180b0e [TG3]: nvram cleanup
Some nvram related cleanup:

1. Add a tg3_nvram_read_swab() since swabing the data is frequently
done.

2. Add a function to convert nvram address to physical address
instead of doing it in 2 separate places.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:29:15 -08:00
Michael Chan
79f4d13a15 [TG3]: Fixup memory test for 5787
Ethtool memory test on 5787 requires a new memory table.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:28:57 -08:00
Michael Chan
fcfa0a32c7 [TG3]: Add new one-shot MSI handler
Support one-shot MSI on 5787.

This one-shot MSI idea is credited to David Miller. In this mode, MSI
disables itself automatically after it is generated, saving the driver
a register access to disable it for NAPI.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:28:41 -08:00
Michael Chan
9c27dbdf64 [TG3]: Add ipv6 checksum support
Support ipv6 tx csum on 5787 by setting NETIF_F_HW_CSUM.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:28:27 -08:00
Michael Chan
5a6f3074c2 [TG3]: Add new hard_start_xmit
Support 5787 hardware TSO using a new flag TG3_FLG2_HW_TSO_2.

Since the TSO interface is slightly different and these chips have
finally fixed the 4GB DMA problem and do not have the 40-bit DMA
problem, a new hard_start_xmit is used for these chips. All previous
chips will use the old hard_start_xmit that is now renamed
tg3_start_xmit_dma_bug().

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:28:05 -08:00