Commit Graph

556 Commits

Author SHA1 Message Date
Alexey Dobriyan
6d703a81ad ide: convert to ->proc_fops
->read_proc, ->write_proc are going away, ->proc_fops should be used instead.

The only tricky place is IDENTIFY handling: if for some reason
taskfile_lib_get_identify() fails, buffer _is_ changed and at least
first byte is overwritten. Emulate old behaviour with returning
that first byte to userspace and reporting length=1 despite overall -E.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 17:52:57 -07:00
Bartlomiej Zolnierkiewicz
665d66e8fa ide: fix races in handling of user-space SET XFER commands
* Make cmd->tf_flags field 'u16' and add IDE_TFLAG_SET_XFER taskfile flag.

* Update ide_finish_cmd() to set xfer / re-read id if the new flag is set.

* Convert set_xfer_rate() (write handler for /proc/ide/hd?/current_speed)
  and ide_cmd_ioctl() (HDIO_DRIVE_CMD ioctl handler) to use the new flag.

* Remove no longer needed disable_irq_nosync() + enable_irq() from
  ide_config_drive_speed().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:43:00 -07:00
Bartlomiej Zolnierkiewicz
fa56d4cb40 ide: allow ide_dev_read_id() to be called from the IRQ context
* Un-static __ide_wait_stat().

* Allow ide_dev_read_id() helper to be called from the IRQ context by
  adding irq_ctx flag and using mdelay()/__ide_wait_stat() when needed.

* Switch ide_driveid_update() to set irq_ctx flag.

This change is needed for the consecutive patch which fixes races in
handling of user-space SET XFER commands but for improved bisectability
and clarity it is better to do it in a separate patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:59 -07:00
Bartlomiej Zolnierkiewicz
2bf427b25b ide: fix resume for CONFIG_BLK_DEV_IDEACPI=y
commit 2f0d0fd2a6 ("ide-acpi: cleanup
do_drive_get_GTF()") didn't account for the lack of hwif->acpidata
check in generic_ide_suspend() [ indirect user of do_drive_get_GTF()
through ide_acpi_exec_tfs() ] resulting in broken resume when ACPI
support is enabled but ACPI data is unavailable.

Fix it by adding ide_port_acpi() helper for checking if port needs
ACPI handling and cleaning generic_ide_{suspend,resume}() to use it
instead of hiding hwif->acpidata and ide_noacpi checks in IDE ACPI
helpers (this should help in preventing similar bugs in the future).

While at it:
- kill superfluous debugging printks in ide_acpi_{get,push}_timing()

Reported-and-tested-by: Etienne Basset <etienne.basset@numericable.fr>
Also-reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-29 19:20:42 -07:00
Bartlomiej Zolnierkiewicz
5e955245d6 ide: always kill the whole request on error
* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_kill_rq()
  and ide_floppy_do_request() for failed requests.
  [ bugfix part ]

* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_do_devset()
  and ide_complete_drive_reset().  Then remove ide_rq_bytes().
  [ cleanup part ]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 23:57:16 -07:00
Bartlomiej Zolnierkiewicz
346c17a6cf ide: relax DMA info validity checking
There are some broken devices that report multiple DMA xfer modes
enabled at once (ATA spec doesn't allow it) but otherwise work fine
with DMA so just delete ide_id_dma_bug().

[ As discovered by detective work by Frans and Bart, due to how
  handling of the ID block was handled before commit c419993
  ("ide-iops: only clear DMA words on setting DMA mode") this
  check was always seeing zeros in the fields or other similar
  garbage.  Therefore this check wasn't actually checking anything.
  Now that the tests actually check the real bits, all we see are
  devices that trigger the check yet work perfectly fine, therefore
  killing this useless check is the best thing to do. -DaveM ]

Reported-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:32 -07:00
Joao Ramos
5bfb151f1f ide: do not access ide_drive_t 'drive_data' field directly
Change ide_drive_t 'drive_data' field from 'unsigned int' type to 'void *'
type, allowing a wider range of values/types to be stored in this field.

Added 'ide_get_drivedata' and 'ide_set_drivedata' helpers to get and set
the 'drive_data' field.

Fixed all host drivers to maintain coherency with the change in the
'drive_data' field type.

Signed-off-by: Joao Ramos <joao.ramos@inov.pt>
[bart: fix qd65xx build, cast to 'unsigned long', minor Coding Style fixups]
Acked-by: Sergei Shtylyov <sshtylyov@ru.montavista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 22:13:44 +02:00
Sergei Shtylyov
f4d3ffa52a ide: move ack_intr() method into 'struct ide_port_ops' (take 2)
Move the ack_intr() method into 'struct ide_port_ops', also renaming it to
test_irq() while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:58 +02:00
Bartlomiej Zolnierkiewicz
5880b5de71 ide: don't enable IORDY at a probe time
* Add 'unsigned long port_flags' field to ide_hwif_t.

* Add IDE_PFLAG_PROBING port flag and keep it set during probing.

* Fix ide_pio_need_iordy() to not enable IORDY at a probe time
  (IORDY may lead to controller lock up on certain controllers
   if the port is not occupied).

Loosely based on the recent libata's fix by Tejun, thanks to Alan
for the hint that IDE may also need it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:54 +02:00
Bartlomiej Zolnierkiewicz
c9ef59ff01 ide: IORDY handling fixes
Add ide_pio_need_iordy() helper and convert host drivers to use it.

This fixes it8172, it8213, pdc202xx_old, piix, slc90e66 and siimage
host drivers to handle IORDY correctly.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15 18:52:53 +02:00
Bartlomiej Zolnierkiewicz
8dcce40813 Merge branch 'bp-remove-pc-buf' into for-next
Conflicts:
	drivers/ide/ide-tape.c
2009-06-13 12:00:54 +02:00
Bartlomiej Zolnierkiewicz
734affdcae ide: add IDE_DFLAG_NIEN_QUIRK device flag
Add IDE_DFLAG_NIEN_QUIRK device flag and use it instead of
drive->quirk_list.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:10 +02:00
Bartlomiej Zolnierkiewicz
8bc1e5aa06 ide: respect quirk_drives[] list on all controllers
* Add ide_check_nien_quirk_list() helper to the core code
  and then use it in ide_port_tune_devices().

* Remove no longer needed ->quirkproc methods from hpt366.c
  and pdc202xx_{new,old}.c.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 15:37:09 +02:00
Bartlomiej Zolnierkiewicz
6250d3af2a Merge branch 'for-linus' into for-next 2009-06-07 14:27:11 +02:00
Bartlomiej Zolnierkiewicz
075affcbe0 ide: preserve Host Protected Area by default (v2)
From the perspective of most users of recent systems, disabling Host
Protected Area (HPA) can break vendor RAID formats, GPT partitions and
risks corrupting firmware or overwriting vendor system recovery tools.

Unfortunately the original (kernels < 2.6.30) behavior (unconditionally
disabling HPA and using full disk capacity) was introduced at the time
when the main use of HPA was to make the drive look small enough for the
BIOS to allow the system to boot with large capacity drives.

Thus to allow the maximum compatibility with the existing setups (using
HPA and partitioned with HPA disabled) we automically disable HPA if
any partitions overlapping HPA are detected.  Additionally HPA can also
be disabled using the "nohpa" module parameter (i.e. "ide_core.nohpa=0.0"
to disable HPA on /dev/hda).

v2:
Fix ->resume HPA support.

While at it:
- remove stale "idebus=" entry from Documentation/kernel-parameters.txt

Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[patch description was based on input from Alan Cox and Frans Pop]
Emphatically-Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 13:52:52 +02:00
Bartlomiej Zolnierkiewicz
e957b60d15 ide-gd: implement block device ->set_capacity method (v2)
* Use ->probed_capacity to store native device capacity for ATA disks.

* Add ->set_capacity method to struct ide_disk_ops.

* Implement disk device ->set_capacity method for ATA disks.

* Implement block device ->set_capacity method.

v2:
* Check if LBA and HPA are supported in ide_disk_set_capacity().

* According to the spec the SET MAX ADDRESS command shall be
  immediately preceded by a READ NATIVE MAX ADDRESS command.

* Add ide_disk_hpa_{get_native,set}_capacity() helpers.

Together with the previous patch adding ->set_capacity block device
method this allows automatic disabling of Host Protected Area (HPA)
if any partitions overlapping HPA are detected.

Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Emphatically-Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 13:52:52 +02:00
Bartlomiej Zolnierkiewicz
4c9773ed79 Merge branch 'for-linus' into for-next 2009-05-22 17:10:55 +02:00
Bartlomiej Zolnierkiewicz
28ee9bc5cc ide: report timeouts in ide_busy_sleep()
* change 'hwif' argument to 'drive'
* report an error on timeout

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22 16:23:38 +02:00
Bartlomiej Zolnierkiewicz
9f36d31437 ide: remove hw_regs_t typedef
Remove hw_regs_t typedef and rename struct hw_regs_s to struct ide_hw.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:25 +02:00
Bartlomiej Zolnierkiewicz
dca3983059 ide: pass number of ports to ide_host_{alloc,add}() (v2)
Pass number of ports to ide_host_{alloc,add}() and then update
all users accordingly.

v2:
- drop no longer needed NULL initializers in buddha.c, cmd640.c and gayle.c
  (noticed by Sergei)

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:24 +02:00
Bartlomiej Zolnierkiewicz
29e52cf793 ide: remove chipset field from hw_regs_t
* Convert host drivers that still use hw_regs_t's chipset field to use
  the one in struct ide_port_info instead.

* Move special handling of ide_pci chipset type from ide_hw_configure()
  to ide_init_port().

* Remove chipset field from hw_regs_t.

While at it:
- remove stale comment in delkin_cb.c

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:22 +02:00
Bartlomiej Zolnierkiewicz
ca1b96e00a ide: replace special_t typedef by IDE_SFLAG_* flags
Replace:
- special_t typedef by IDE_SFLAG_* flags
- 'special_t special' ide_drive_t's field by 'u8 special_flags' one

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17 19:12:21 +02:00
Borislav Petkov
103f7033bd ide: unify interrupt reason checking
Add ide_check_ireason() function that handles all ATAPI devices.
Reorganize all unlikely cases in ireason checking further down in the
code path.

In addition, add PFX for printks originating from ide-atapi. Finally,
remove ide_cd_check_ireason.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:45 +02:00
Borislav Petkov
19f52a784f ide-atapi: remove pc->buf
Now after all users of pc->buf have been converted, remove the 64B buffer
embedded in each packet command.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:38 +02:00
Borislav Petkov
b13345f39d ide-atapi: add a buffer-arg to ide_queue_pc_tail
This is in preparation of removing ide_atapi_pc. Expose the buffer as an
argument to ide_queue_pc_tail with later replacing it with local buffer
or even kmalloc'ed one if needed due to stack usage constraints.

Also, add the possibility of passing a NULL-ptr buffer for cmds which
don't transfer data besides the cdb. While at it, switch to local buffer
in idetape_get_mode_sense_results().

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:09 +02:00
Borislav Petkov
5a0e43b5e2 ide-atapi: add a len-parameter to ide_queue_pc_tail
This is in preparation for removing ide_atapi_pc.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:06 +02:00
Borislav Petkov
077e6dba20 ide-atapi: switch to rq->resid_len
Now that we have rq->resid_len, use it to account partial completion
amount during the lifetime of an rq, decrementing it on each successful
transfer. As a result, get rid of now unused pc->xferred.

While at it, remove noisy debug call in ide_prep_sense.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:02 +02:00
Tejun Heo
29d1a43710 ide-atapi: kill unused fields and callbacks
Impact: remove fields and code paths which are no longer necessary

Now that ide-tape uses standard mechanisms to transfer data, special
case handling for bh handling can be dropped from ide-atapi.  Drop the
followings.

* pc->cur_pos, b_count, bh and b_data
* drive->pc_update_buffers() and pc_io_buffers().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:32 +02:00
Tejun Heo
02e7cf8f84 ide-cd,atapi: use bio for internal commands
Impact: unify request data buffer handling

rq->data is used mostly to pass kernel buffer through request queue
without using bio.  There are only a couple of places which still do
this in kernel and converting to bio isn't difficult.

This patch converts ide-cd and atapi to use bio instead of rq->data
for request sense and internal pc commands.  With previous change to
unify sense request handling, this is relatively easily achieved by
adding blk_rq_map_kern() during sense_rq prep and PC issue.

If blk_rq_map_kern() fails for sense, the error is deferred till sense
issue and aborts the failed command which triggered the sense.  Note
that this is a slim possibility as sense prep is done on each command
issue, so for the above condition to actually trigger, all preps since
the last sense issue till the issue of the request which would require
a sense should fail.

* do_request functions might sleep now.  This should be okay as ide
  request_fn - do_ide_request() - is invoked only from make_request
  and plug work.  Make sure this is the case by adding might_sleep()
  to do_ide_request().

* Functions which access the read sense data before the sense request
  is complete now should access bio_data(sense_rq->bio) as the sense
  buffer might have been copied during blk_rq_map_kern().

* ide-tape updated to map sg.

* cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC
  special case.  Simplified.

* tp_ops->output/input_data path dropped from ide_pc_intr().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:30 +02:00
Borislav Petkov
068753203e ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer
Since we're issuing REQ_TYPE_SENSE now we need to allow those types of
rqs in the ->do_request callbacks. As a future improvement, sense_len
assignment might be unified across all ATAPI devices. Borislav to
check with specs and test.

As a result, get rid of ide_queue_pc_head() and
drive->request_sense_rq.

tj: * Init request sense ide_atapi_pc from sense request.  In the
      longer timer, it would probably better to fold
      ide_create_request_sense_cmd() into its only current user -
      ide_floppy_get_format_progress().

    * ide_retry_pc() no longer takes @disk.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:30 +02:00
Borislav Petkov
e69d800f7e ide: add helpers for preparing sense requests
This is in preparation of removing the queueing of a sense request out
of the IRQ handler path.

Use struct request_sense as a general sense buffer for all ATAPI
devices ide-{floppy,tape,cd}.

tj: * blk_get_request(__GFP_WAIT) can't be called from do_request() as
      it can cause deadlock.  Converted to use inline struct request
      and blk_rq_init().

    * Added xfer / cdb len selection depending on device type.

    * All sense prep logics folded into ide_prep_sense() which never
      fails.

    * hwif->rq clearing and sense_rq used handling moved into
      ide_queue_sense_rq().

    * blk_rq_map_kern() conversion is moved to later patch.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:30 +02:00
Tejun Heo
214ae19104 ide kill unused ide_cmd->special
Impact: removal of unused field

No one uses ide_cmd->special anymore.  Kill it.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28 07:37:29 +02:00
Tejun Heo
6d7003877c ide-atapi: kill unused fields and callbacks
Impact: remove fields and code paths which are no longer necessary

Now that ide-tape uses standard mechanisms to transfer data, special
case handling for bh handling can be dropped from ide-atapi.  Drop the
followings.

* pc->cur_pos, b_count, bh and b_data
* drive->pc_update_buffers() and pc_io_buffers().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 08:46:03 +09:00
Tejun Heo
5c4be57249 ide-cd,atapi: use bio for internal commands
Impact: unify request data buffer handling

rq->data is used mostly to pass kernel buffer through request queue
without using bio.  There are only a couple of places which still do
this in kernel and converting to bio isn't difficult.

This patch converts ide-cd and atapi to use bio instead of rq->data
for request sense and internal pc commands.  With previous change to
unify sense request handling, this is relatively easily achieved by
adding blk_rq_map_kern() during sense_rq prep and PC issue.

If blk_rq_map_kern() fails for sense, the error is deferred till sense
issue and aborts the failed command which triggered the sense.  Note
that this is a slim possibility as sense prep is done on each command
issue, so for the above condition to actually trigger, all preps since
the last sense issue till the issue of the request which would require
a sense should fail.

* do_request functions might sleep now.  This should be okay as ide
  request_fn - do_ide_request() - is invoked only from make_request
  and plug work.  Make sure this is the case by adding might_sleep()
  to do_ide_request().

* Functions which access the read sense data before the sense request
  is complete now should access bio_data(sense_rq->bio) as the sense
  buffer might have been copied during blk_rq_map_kern().

* ide-tape updated to map sg.

* cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC
  special case.  Simplified.

* tp_ops->output/input_data path dropped from ide_pc_intr().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 07:00:42 +09:00
Borislav Petkov
6b544fcc8c ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer
Since we're issuing REQ_TYPE_SENSE now we need to allow those types of
rqs in the ->do_request callbacks. As a future improvement, sense_len
assignment might be unified across all ATAPI devices. Borislav to
check with specs and test.

As a result, get rid of ide_queue_pc_head() and
drive->request_sense_rq.

tj: * Init request sense ide_atapi_pc from sense request.  In the
      longer timer, it would probably better to fold
      ide_create_request_sense_cmd() into its only current user -
      ide_floppy_get_format_progress().

    * ide_retry_pc() no longer takes @disk.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 07:00:42 +09:00
Borislav Petkov
a1df5169f9 ide: add helpers for preparing sense requests
This is in preparation of removing the queueing of a sense request out
of the IRQ handler path.

Use struct request_sense as a general sense buffer for all ATAPI
devices ide-{floppy,tape,cd}.

tj: * blk_get_request(__GFP_WAIT) can't be called from do_request() as
      it can cause deadlock.  Converted to use inline struct request
      and blk_rq_init().

    * Added xfer / cdb len selection depending on device type.

    * All sense prep logics folded into ide_prep_sense() which never
      fails.

    * hwif->rq clearing and sense_rq used handling moved into
      ide_queue_sense_rq().

    * blk_rq_map_kern() conversion is moved to later patch.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 07:00:42 +09:00
Tejun Heo
46a802e852 ide kill unused ide_cmd->special
Impact: removal of unused field

No one uses ide_cmd->special anymore.  Kill it.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19 07:00:41 +09:00
Sergei Shtylyov
3153c26b54 ide: refactor tf_read() method
Simplify tf_read() method, making it deal only with 'struct ide_taskfile' and
the validity flags that the upper layer passes, and factoring out the code that
deals with the high order bytes into ide_tf_readback() to be called from the
only two functions interested, ide_complete_cmd() and ide_dump_sector().

This should stop the needless code duplication in this method and so make
it about twice smaller than it was; along with simplifying the setup for
the method call, this should save both time and space...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:03 +02:00
Sergei Shtylyov
c9ff9e7b64 ide: refactor tf_load() method
Simplify tf_load() method, making it deal only with 'struct ide_taskfile' and
the validity flags that the upper layer passes, and moving the code that deals
with the high order bytes into the only function interested, do_rw_taskfile().

This should stop the needless code duplication in this method and so make
it about twice smaller than it was; along with simplifying the setup for the
method call, this should save both time and space...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:03 +02:00
Sergei Shtylyov
745483f10c ide: simplify 'struct ide_taskfile'
Make 'struct ide_taskfile' cover only 8 register values and thus put two such
fields ('tf' and 'hob') into 'struct ide_cmd', dropping unnecessary 'tf_array'
field from it.

This required changing the prototype of ide_get_lba_addr() and ide_tf_dump().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: fix setting of ATA_LBA bit for LBA48 commands in __ide_do_rw_disk()]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:02 +02:00
Sergei Shtylyov
60f85019c6 ide: replace IDE_TFLAG_* flags by IDE_VALID_*
Replace IDE_TFLAG_{IN|OUT}_* flags meaning to the taskfile register validity on
input/output by the IDE_VALID_* flags and introduce 4 symmetric 8-bit register
validity indicator subfields, 'valid.{input/output}.{tf|hob}', into the 'struct
ide_cmd' instead of using the 'tf_flags' field for that purpose (this field can
then be turned from 32-bit into 8-bit one).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08 14:13:01 +02:00
Sergei Shtylyov
fdd88f0af6 ide: inline SELECT_DRIVE()
Since SELECT_DRIVE() has boiled down to a mere dev_select() method call, it now
makes sense to just inline it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:33 +02:00
Sergei Shtylyov
abb596b25e ide: turn selectproc() method into dev_select() method (take 5)
Turn selectproc() method into dev_select() method by teaching it to write to the
device register and moving it from 'struct ide_port_ops' to 'struct ide_tp_ops'.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: benh@kernel.crashing.org
Cc: petkovbb@gmail.com
[bart: add ->dev_select to at91_ide.c and tx4939.c (__BIG_ENDIAN case)]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:32 +02:00
Sergei Shtylyov
6762511934 ide: rename IDE_TFLAG_IN_[HOB_]FEATURE
The feature register has never been readable -- when its location is read, one
gets the error register value; hence rename IDE_TFLAG_IN_[HOB_]FEATURE into
IDE_TFLAG_IN_[HOB_]ERROR and introduce the 'hob_error' field into the 'struct
ide_taskfile' (despite the error register not really depending on the HOB bit).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:30 +02:00
Sergei Shtylyov
ecf3a31d2a ide: turn set_irq() method into write_devctl() method
Turn set_irq() method with its software reset hack into write_devctl() method
(for just writing a value into the device control register) at last...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:30 +02:00
Bartlomiej Zolnierkiewicz
349d12a1fe ide-floppy: use ide_pio_bytes()
* Fix ide_init_sg_cmd() setup for non-fs requests.

* Convert ide_pc_intr() to use ide_pio_bytes() for floppy media.

* Remove no longer needed ide_io_buffers() and sg/sg_cnt fields
  from struct ide_atapi_pc.

* Remove partial completions; kill idefloppy_update_buffers(), as a
  result.

* Add some more debugging statements.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:26 +02:00
Bartlomiej Zolnierkiewicz
41fa9f863b ide: decrease size of ->pc_buf field in struct ide_atapi_pc
struct ide_atapi_pc is often allocated on the stack and size of ->pc_buf
size is 256 bytes.  However since only ide_floppy_create_read_capacity_cmd()
and idetape_create_inquiry_cmd() require such size allocate buffers for
these pc-s explicitely and decrease ->pc_buf size to 64 bytes.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:25 +02:00
Bartlomiej Zolnierkiewicz
f094d4d83b ide: sanitize ide_build_sglist() and ide_destroy_dmatable()
* Move ide_map_sg() calls out from ide_build_sglist()
  to ide_dma_prepare().

* Pass command to ide_destroy_dmatable().

* Rename ide_build_sglist() to ide_dma_map_sg()
  and ide_destroy_dmatable() to ide_dma_unmap_sg().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:24 +02:00
Bartlomiej Zolnierkiewicz
8a4a5738ba ide: add ->dma_check method
* Add (an optional) ->dma_check method for checking if DMA can be
  used for a given command and fail DMA setup in ide_dma_prepare()
  if necessary.

* Convert alim15x3 and trm290 host drivers to use ->dma_check.

* Rename ali15x3_dma_setup() to ali_dma_check() while at it.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:21 +02:00
Bartlomiej Zolnierkiewicz
5ae5412d9a ide: add ide_dma_prepare() helper
* Add ide_dma_prepare() helper.

* Convert ide_issue_pc() and do_rw_taskfile() to use it.

* Make ide_build_sglist() static.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:20 +02:00