Commit Graph

90 Commits

Author SHA1 Message Date
Sheng Yang
36463146ff KVM: Get support IRQ routing entry counts
In capability probing ioctl.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:14 +02:00
Weidong Han
4a906e49f1 KVM: fix kvm_vm_ioctl_deassign_device
only need to set assigned_dev_id for deassignment, use
match->flags to judge and deassign it.

Acked-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:12 +02:00
Joerg Roedel
fc5659c8c6 KVM: MMU: handle compound pages in kvm_is_mmio_pfn
The function kvm_is_mmio_pfn is called before put_page is called on a
page by KVM. This is a problem when when this function is called on some
struct page which is part of a compund page. It does not test the
reserved flag of the compound page but of the struct page within the
compount page. This is a problem when KVM works with hugepages allocated
at boot time. These pages have the reserved bit set in all tail pages.
Only the flag in the compount head is cleared. KVM would not put such a
page which results in a memory leak.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:09 +02:00
Sheng Yang
79950e1073 KVM: Use irq routing API for MSI
Merge MSI userspace interface with IRQ routing table. Notice the API have been
changed, and using IRQ routing table would be the only interface kvm-userspace
supported.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:09 +02:00
Avi Kivity
399ec807dd KVM: Userspace controlled irq routing
Currently KVM has a static routing from GSI numbers to interrupts (namely,
0-15 are mapped 1:1 to both PIC and IOAPIC, and 16:23 are mapped 1:1 to
the IOAPIC).  This is insufficient for several reasons:

- HPET requires non 1:1 mapping for the timer interrupt
- MSIs need a new method to assign interrupt numbers and dispatch them
- ACPI APIC mode needs to be able to reassign the PCI LINK interrupts to the
  ioapics

This patch implements an interrupt routing table (as a linked list, but this
can be easily changed) and a userspace interface to replace the table.  The
routing table is initialized according to the current hardwired mapping.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:06 +02:00
Avi Kivity
75858a84a6 KVM: Interrupt mask notifiers for ioapic
Allow clients to request notifications when the guest masks or unmasks a
particular irq line.  This complements irq ack notifications, as the guest
will not ack an irq line that is masked.

Currently implemented for the ioapic only.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:03 +02:00
Sheng Yang
17071fe74f KVM: Add support to disable MSI for assigned device
MSI is always enabled by default for msi2intx=1. But if msi2intx=0, we
have to disable MSI if guest require to do so.

The patch also discard unnecessary msi2intx judgment if guest want to update
MSI state.

Notice KVM_DEV_IRQ_ASSIGN_MSI_ACTION is a mask which should cover all MSI
related operations, though we only got one for now.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:02 +02:00
Jan Kiszka
d0bfb940ec KVM: New guest debug interface
This rips out the support for KVM_DEBUG_GUEST and introduces a new IOCTL
instead: KVM_SET_GUEST_DEBUG. The IOCTL payload consists of a generic
part, controlling the "main switch" and the single-step feature. The
arch specific part adds an x86 interface for intercepting both types of
debug exceptions separately and re-injecting them when the host was not
interested. Moveover, the foundation for guest debugging via debug
registers is layed.

To signal breakpoint events properly back to userland, an arch-specific
data block is now returned along KVM_EXIT_DEBUG. For x86, the arch block
contains the PC, the debug exception, and relevant debug registers to
tell debug events properly apart.

The availability of this new interface is signaled by
KVM_CAP_SET_GUEST_DEBUG. Empty stubs for not yet supported archs are
provided.

Note that both SVM and VTX are supported, but only the latter was tested
yet. Based on the experience with all those VTX corner case, I would be
fairly surprised if SVM will work out of the box.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:49 +02:00
Mark McLoughlin
682edb4c01 KVM: Fix assigned devices circular locking dependency
kvm->slots_lock is outer to kvm->lock, so take slots_lock
in kvm_vm_ioctl_assign_device() before taking kvm->lock,
rather than taking it in kvm_iommu_map_memslots().

Cc: stable@kernel.org
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15 02:47:39 +02:00
Sheng Yang
d7cff1c376 KVM: Fix INTx for device assignment
Missing buckets and wrong parameter for free_irq()

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15 02:47:38 +02:00
Sheng Yang
ba4cef31d5 KVM: Fix racy in kvm_free_assigned_irq
In the past, kvm_get_kvm() and kvm_put_kvm() was called in assigned device irq
handler and interrupt_work, in order to prevent cancel_work_sync() in
kvm_free_assigned_irq got a illegal state when waiting for interrupt_work done.
But it's tricky and still got two problems:

1. A bug ignored two conditions that cancel_work_sync() would return true result
in a additional kvm_put_kvm().

2. If interrupt type is MSI, we would got a window between cancel_work_sync()
and free_irq(), which interrupt would be injected again...

This patch discard the reference count used for irq handler and interrupt_work,
and ensure the legal state by moving the free function at the very beginning of
kvm_destroy_vm(). And the patch fix the second bug by disable irq before
cancel_work_sync(), which may result in nested disable of irq but OK for we are
going to free it.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15 02:47:36 +02:00
Sheng Yang
ad8ba2cd44 KVM: Add kvm_arch_sync_events to sync with asynchronize events
kvm_arch_sync_events is introduced to quiet down all other events may happen
contemporary with VM destroy process, like IRQ handler and work struct for
assigned device.

For kvm_arch_sync_events is called at the very beginning of kvm_destroy_vm(), so
the state of KVM here is legal and can provide a environment to quiet down other
events.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15 02:47:36 +02:00
Marcelo Tosatti
85db06e514 KVM: mmu_notifiers release method
The destructor for huge pages uses the backing inode for adjusting
hugetlbfs accounting.

Hugepage mappings are destroyed by exit_mmap, after
mmu_notifier_release, so there are no notifications through
unmap_hugepage_range at this point.

The hugetlbfs inode can be freed with pages backed by it referenced
by the shadow. When the shadow releases its reference, the huge page
destructor will access a now freed inode.

Implement the release operation for kvm mmu notifiers to release page
refs before the hugetlbfs inode is gone.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15 02:47:35 +02:00
Joerg Roedel
19de40a847 KVM: change KVM to use IOMMU API
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03 14:11:07 +01:00
Weidong Han
b653574a7d Deassign device in kvm_free_assgined_device
In kvm_iommu_unmap_memslots(), assigned_dev_head is already empty.

Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03 14:10:08 +01:00
Weidong Han
0a92035674 KVM: support device deassignment
Support device deassignment, it can be used in device hotplug.

Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03 14:02:19 +01:00
Weidong Han
260782bcfd KVM: use the new intel iommu APIs
intel iommu APIs are updated, use the new APIs.

In addition, change kvm_iommu_map_guest() to just create the domain, let kvm_iommu_assign_device() assign device.

Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03 14:02:19 +01:00
Mark McLoughlin
defaf1587c KVM: fix handling of ACK from shared guest IRQ
If an assigned device shares a guest irq with an emulated
device then we currently interpret an ack generated by the
emulated device as originating from the assigned device
leading to e.g. "Unbalanced enable for IRQ 4347" from the
enable_irq() in kvm_assigned_dev_ack_irq().

The fix is fairly simple - don't enable the physical device
irq unless it was previously disabled.

Of course, this can still lead to a situation where a
non-assigned device ACK can cause the physical device irq to
be reenabled before the device was serviced. However, being
level sensitive, the interrupt will merely be regenerated.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:47 +02:00
Avi Kivity
ca9edaee1a KVM: Consolidate userspace memory capability reporting into common code
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:46 +02:00
Avi Kivity
1a811b6167 KVM: Advertise the bug in memory region destruction as fixed
Userspace might need to act differently.

Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:46 +02:00
Rusty Russell
7f59f492da KVM: use cpumask_var_t for cpus_hardware_enabled
This changes cpus_hardware_enabled from a cpumask_t to a cpumask_var_t:
equivalent for CONFIG_CPUMASKS_OFFSTACK=n, otherwise dynamically allocated.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:45 +02:00
Rusty Russell
6ef7a1bc45 KVM: use modern cpumask primitives, no cpumask_t on stack
We're getting rid on on-stack cpumasks for large NR_CPUS.

1) Use cpumask_var_t/alloc_cpumask_var.
2) smp_call_function_mask -> smp_call_function_many
3) cpus_clear, cpus_empty, cpu_set -> cpumask_clear, cpumask_empty,
   cpumask_set_cpu.

This actually generates slightly smaller code than the old one with
CONFIG_CPUMASKS_OFFSTACK=n.  (gcc knows that cpus cannot be NULL in
that case, where cpumask_var_t is cpumask_t[1]).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:45 +02:00
Rusty Russell
498468961e KVM: Extract core of kvm_flush_remote_tlbs/kvm_reload_remote_mmus
Avi said:
> Wow, code duplication from Rusty. Things must be bad.

Something about glass houses comes to mind.  But instead, a patch.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:45 +02:00
Christian Borntraeger
3d3aab1b97 KVM: set owner of cpu and vm file operations
There is a race between a "close of the file descriptors" and module
unload in the kvm module.

You can easily trigger this problem by applying this debug patch:
>--- kvm.orig/virt/kvm/kvm_main.c
>+++ kvm/virt/kvm/kvm_main.c
>@@ -648,10 +648,14 @@ void kvm_free_physmem(struct kvm *kvm)
>                kvm_free_physmem_slot(&kvm->memslots[i], NULL);
> }
>
>+#include <linux/delay.h>
> static void kvm_destroy_vm(struct kvm *kvm)
> {
>        struct mm_struct *mm = kvm->mm;
>
>+       printk("off1\n");
>+       msleep(5000);
>+       printk("off2\n");
>        spin_lock(&kvm_lock);
>        list_del(&kvm->vm_list);
>        spin_unlock(&kvm_lock);

and killing the userspace, followed by an rmmod.

The problem is that kvm_destroy_vm can run while the module count
is 0. That means, you can remove the module while kvm_destroy_vm
is running. But kvm_destroy_vm is part of the module text. This
causes a kerneloops. The race exists without the msleep but is much
harder to trigger.

This patch requires the fix for anon_inodes (anon_inodes: use fops->owner
for module refcount).
With this patch, we can set the owner of all anonymous KVM inodes file
operations. The VFS will then control the KVM module refcount as long as there
is an open file. kvm_destroy_vm will be called by the release function of the
last closed file - before the VFS drops the module refcount.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:45 +02:00
Glauber Costa
6f89724829 KVM: Really remove a slot when a user ask us so
Right now, KVM does not remove a slot when we do a
register ioctl for size 0 (would be the expected behaviour).

Instead, we only mark it as empty, but keep all bitmaps
and allocated data structures present. It completely
nullifies our chances of reusing that same slot again
for mapping a different piece of memory.

In this patch, we destroy rmaps, and vfree() the
pointers that used to hold the dirty bitmap, rmap
and lpage_info structures.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:41 +02:00
Mark McLoughlin
4a643be8c9 KVM: split out kvm_free_assigned_irq()
Split out the logic corresponding to undoing assign_irq() and
clean it up a bit.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:07 +02:00
Mark McLoughlin
f29b2673d3 KVM: don't free an unallocated irq source id
Set assigned_dev->irq_source_id to -1 so that we can avoid freeing
a source ID which we never allocated.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:06 +02:00
Hannes Eder
e8ba5d311d KVM: fix sparse warning
Impact: make global function static

  virt/kvm/kvm_main.c:85:6: warning: symbol 'kvm_rebooting' was not declared. Should it be static?

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:05 +02:00
Sheng Yang
5319c66252 KVM: MSI to INTx translate
Now we use MSI as default one, and translate MSI to INTx when guest need
INTx rather than MSI. For legacy device, we provide support for non-sharing
host IRQ.

Provide a parameter msi2intx for this method. The value is true by default in
x86 architecture.

We can't guarantee this mode can work on every device, but for most of us
tested, it works. If your device encounter some trouble with this mode, you can
try set msi2intx modules parameter to 0. If the device is OK with msi2intx=0,
then please report it to KVM mailing list or me. We may prepare a blacklist for
the device that can't work in this mode.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:02 +02:00
Sheng Yang
6b9cc7fd46 KVM: Enable MSI for device assignment
We enable guest MSI and host MSI support in this patch. The userspace want to
enable MSI should set KVM_DEV_IRQ_ASSIGN_ENABLE_MSI in the assigned_irq's flag.
Function would return -ENOTTY if can't enable MSI, userspace shouldn't set MSI
Enable bit when KVM_ASSIGN_IRQ return -ENOTTY with
KVM_DEV_IRQ_ASSIGN_ENABLE_MSI.

Userspace can tell the support of MSI device from #ifdef KVM_CAP_DEVICE_MSI.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:02 +02:00
Sheng Yang
f64769eb05 KVM: Add assigned_device_msi_dispatch()
The function is used to dispatch MSI to lapic according to MSI message
address and message data.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:02 +02:00
Sheng Yang
fbac7818d8 KVM: Clean up assigned_device_update_irq
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:01 +02:00
Sheng Yang
4f906c19ae KVM: Replace irq_requested with more generic irq_requested_type
Separate guest irq type and host irq type, for we can support guest using INTx
with host using MSI (but not opposite combination).

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:01 +02:00
Sheng Yang
00e3ed39e2 KVM: Separate update irq to a single function
Separate INTx enabling part to a independence function, so that we can add MSI
enabling part easily.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:00 +02:00
Sheng Yang
342ffb9300 KVM: Move ack notifier register and IRQ sourcd ID request
Distinguish common part for device assignment and INTx part, perparing for
refactor later.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:00 +02:00
Sheng Yang
e7cacd40d2 KVM: Fix kernel allocated memory slot
Commit 7fd49de9773fdcb7b75e823b21c1c5dc1e218c14 "KVM: ensure that memslot
userspace addresses are page-aligned" broke kernel space allocated memory
slot, for the userspace_addr is invalid.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:52:25 +02:00
Hollis Blanchard
7874980922 KVM: ensure that memslot userspace addresses are page-aligned
Bad page translation and silent guest failure ensue if the userspace address is
not page-aligned.  I hit this problem using large (host) pages with qemu,
because qemu currently has a hardcoded 4096-byte alignment for guest memory
allocations.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:52:24 +02:00
Izik Eidus
2843099fee KVM: MMU: Fix aliased gfns treated as unaliased
Some areas of kvm x86 mmu are using gfn offset inside a slot without
unaliasing the gfn first.  This patch makes sure that the gfn will be
unaliased and add gfn_to_memslot_unaliased() to save the calculating
of the gfn unaliasing in case we have it unaliased already.

Signed-off-by: Izik Eidus <ieidus@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:51:50 +02:00
Sheng Yang
6eb55818c0 KVM: Enable Function Level Reset for assigned device
Ideally, every assigned device should in a clear condition before and after
assignment, so that the former state of device won't affect later work.
Some devices provide a mechanism named Function Level Reset, which is
defined in PCI/PCI-e document. We should execute it before and after device
assignment.

(But sadly, the feature is new, and most device on the market now don't
support it. We are considering using D0/D3hot transmit to emulate it later,
but not that elegant and reliable as FLR itself.)

[Update: Reminded by Xiantao, execute FLR after we ensure that the device can
be assigned to the guest.]

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:51:49 +02:00
Sheng Yang
e19e30effa KVM: IRQ ACK notifier should be used with in-kernel irqchip
Also remove unnecessary parameter of unregister irq ack notifier.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:51:47 +02:00
Sheng Yang
5550af4df1 KVM: Fix guest shared interrupt with in-kernel irqchip
Every call of kvm_set_irq() should offer an irq_source_id, which is
allocated by kvm_request_irq_source_id(). Based on irq_source_id, we
identify the irq source and implement logical OR for shared level
interrupts.

The allocated irq_source_id can be freed by kvm_free_irq_source_id().

Currently, we support at most sizeof(unsigned long) different irq sources.

[Amit: - rebase to kvm.git HEAD
       - move definition of KVM_USERSPACE_IRQ_SOURCE_ID to common file
       - move kvm_request_irq_source_id to the update_irq ioctl]

[Xiantao: - Add kvm/ia64 stuff and make it work for kvm/ia64 guests]

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-28 14:21:34 +02:00
Xiantao Zhang
c77fb9dc7a KVM: Change is_mmio_pfn to kvm_is_mmio_pfn, and make it common for all archs
Add a kvm_ prefix to avoid polluting kernel's name space.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 14:25:34 +02:00
Xiantao Zhang
8a98f6648a KVM: Move device assignment logic to common code
To share with other archs, this patch moves device assignment
logic to common parts.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 14:25:33 +02:00
Weidong Han
e5fcfc821a KVM: Device Assignment: Map mmio pages into VT-d page table
Assigned device could DMA to mmio pages, so also need to map mmio pages
into VT-d page table.

Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-15 14:25:29 +02:00
Weidong Han
271b05281f KVM: Remove useless intel-iommu.h header inclusion
Currently "#include <linux/intel-iommu.h>" is not needed in
virt/kvm/kvm_main.c.

Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-15 14:25:11 +02:00
Glauber Costa
7d8fece678 KVM: Don't destroy vcpu in case vcpu_setup fails
One of vcpu_setup responsibilities is to do mmu initialization.
However, in case we fail in kvm_arch_vcpu_reset, before we get the
chance to init mmu. OTOH, vcpu_destroy will attempt to destroy mmu,
triggering a bug. Keeping track of whether or not mmu is initialized
would unnecessarily complicate things. Rather, we just make return,
making sure any needed uninitialization is done before we return, in
case we fail.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-15 14:25:10 +02:00
Marcelo Tosatti
4c2155ce81 KVM: switch to get_user_pages_fast
Convert gfn_to_pfn to use get_user_pages_fast, which can do lockless
pagetable lookups on x86. Kernel compilation on 4-way guest is 3.7%
faster on VMX.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-15 14:25:06 +02:00
Marcelo Tosatti
777b3f49d2 KVM: opencode gfn_to_page in kvm_vm_fault
kvm_vm_fault is invoked with mmap_sem held in read mode. Since gfn_to_page
will be converted to get_user_pages_fast, which requires this lock NOT
to be held, switch to opencoded get_user_pages.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-15 14:25:05 +02:00
Ben-Ami Yassour
62c476c7c7 KVM: Device Assignment with VT-d
Based on a patch by: Kay, Allen M <allen.m.kay@intel.com>

This patch enables PCI device assignment based on VT-d support.
When a device is assigned to the guest, the guest memory is pinned and
the mapping is updated in the VT-d IOMMU.

[Amit: Expose KVM_CAP_IOMMU so we can check if an IOMMU is present
and also control enable/disable from userspace]

Signed-off-by: Kay, Allen M <allen.m.kay@intel.com>
Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Ben-Ami Yassour <benami@il.ibm.com>
Signed-off-by: Amit Shah <amit.shah@qumranet.com>

Acked-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 14:25:04 +02:00
Marcelo Tosatti
d76901750a KVM: x86: do not execute halted vcpus
Offline or uninitialized vcpu's can be executed if requested to perform
userspace work.

Follow Avi's suggestion to handle halted vcpu's in the main loop,
simplifying kvm_emulate_halt(). Introduce a new vcpu->requests bit to
indicate events that promote state from halted to running.

Also standardize vcpu wake sites.

Signed-off-by: Marcelo Tosatti <mtosatti <at> redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:26 +02:00