Commit Graph

6855 Commits

Author SHA1 Message Date
Linus Torvalds
7f8635cc9e Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cciss: fix cciss_revalidate panic
  block: max hardware sectors limit wrapper
  block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead
  blk-throttle: Correct the placement of smp_rmb()
  blk-throttle: Trim/adjust slice_end once a bio has been dispatched
  block: check for proper length of iov entries earlier in blk_rq_map_user_iov()
  drbd: fix for spin_lock_irqsave in endio callback
  drbd: don't recvmsg with zero length
2010-12-20 09:19:46 -08:00
Martin K. Petersen
e692cb668f block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead
When stacking devices, a request_queue is not always available. This
forced us to have a no_cluster flag in the queue_limits that could be
used as a carrier until the request_queue had been set up for a
metadevice.

There were several problems with that approach. First of all it was up
to the stacking device to remember to set queue flag after stacking had
completed. Also, the queue flag and the queue limits had to be kept in
sync at all times. We got that wrong, which could lead to us issuing
commands that went beyond the max scatterlist limit set by the driver.

The proper fix is to avoid having two flags for tracking the same thing.
We deprecate QUEUE_FLAG_CLUSTER and use the queue limit directly in the
block layer merging functions. The queue_limit 'no_cluster' is turned
into 'cluster' to avoid double negatives and to ease stacking.
Clustering defaults to being enabled as before. The queue flag logic is
removed from the stacking function, and explicitly setting the cluster
flag is no longer necessary in DM and MD.

Reported-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 08:35:53 +01:00
Mike Miller
7c03b87048 [SCSI] hpsa: fix redefinition of PCI_DEVICE_ID_CISSF
PCI_DEVICE_ID_CISSF is defined as 323b in pci_ids.h but redefined as 3fff in
hpsa.c. The ID of 3fff will _never_ ship as a standalone controller. It is
intended only as part a complete storage solution. As such, this patch
removes the redefinition and the StorageWorks P1210m from the product table.

It also removes a duplicate line for the "unknown" controller support.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09 15:06:50 -06:00
Madhuranath Iyengar
13d38d9df2 [SCSI] qla2xxx: Update version number to 8.03.05-k0.
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09 13:25:51 -06:00
Saurav Kashyap
69abf61ea1 [SCSI] qla2xxx: Properly set the return value in qla2xxx_eh_abort function.
A return value is not set for the successful case and it has a garbage value.
This fix will set the default value to SUCCESS and in case of any failures
it is changed.

Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09 13:25:47 -06:00
Andrew Vasquez
087c621e22 [SCSI] qla2xxx: Correct issue where NPIV-config data was not being allocated for 82xx parts.
This would cause a panic while reading the NPIV-config data.

Cc: stable@kernel.org
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09 13:25:21 -06:00
Mike Hernandez
7992abfc8b [SCSI] qla2xxx: Change MSI initialization from using incorrect request_irq parameter.
IRQF_SHARED flag should not be set when calling request_irq for MSI
since this interrupt mechanism cannot be shared like standard INTx.

Signed-off-by: Mike Hernandez <michael.hernandez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09 13:25:03 -06:00
Mike Hernandez
85727e1f78 [SCSI] qla2xxx: Populate Command Type 6 LUN field properly.
Use the host_to_fcp_swap call to correctly populate the LUN field
in the Command Type 6 path.  This field is used during LUN reset
cleanup and must match the field used in the FCP command.

Cc: stable@kernel.org
Signed-off-by: Mike Hernandez <michael.hernandez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09 13:24:11 -06:00
James Bottomley
459dbf72e4 [SCSI] Eliminate error handler overload of the SCSI serial number
The error handler is using the test cmd->serial_number == 0 in the
abort routines to signal that the command to be aborted has already
completed normally.  This design was to close a race window in the
original error handler where a command could go through the normal
completion routines after it timed out but before error handling was
started.

Mike Anderson pointed out that when we converted our timeout and
softirq completions, we picked up atomicity here because the block
layer now mediates this with the REQ_ATOM_COMPLETE flag and guarantees
that *either* the command times out or our done routine is called, but
ensures we can't get both occurring.  That makes the serial number
zero check redundant and it can be removed.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09 09:41:16 -06:00
Anil Ravindranath
5da6141005 [SCSI] pmcraid: disable msix and expand device config entry
Firmware requires a larger configuration entry size than the driver
currently allows, and MSI-X pretty much doesn't work with current FW,
so disable it for now.

Signed-off-by: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09 09:41:15 -06:00
Dan Carpenter
057f02a38e [SCSI] osd: checking NULL instead of ERR_PTR()
bio_map_kern() returns ERR_PTRs on failure and never returns NULL.

[jejb: remove redundant unlikely spotted by Tobias Klauser]
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09 09:24:13 -06:00
Russell King
5d61b718ec SCSI: arm fas216: fix missing ';'
f281233 (SCSI host lock push-down) broke the fas216 build:

drivers/scsi/arm/fas216.h: In function 'fas216_noqueue_command':
drivers/scsi/arm/fas216.h:354: error: storage class specified for parameter 'fas216_intr'
drivers/scsi/arm/fas216.h:356: error: storage class specified for parameter 'fas216_remove'
...

Fix it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-23 22:26:23 +00:00
Arnd Bergmann
451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Jeff Garzik
f281233d3e SCSI host lock push-down
Move the mid-layer's ->queuecommand() invocation from being locked
with the host lock to being unlocked to facilitate speeding up the
critical path for drivers who don't need this lock taken anyway.

The patch below presents a simple SCSI host lock push-down as an
equivalent transformation.  No locking or other behavior should change
with this patch.  All existing bugs and locking orders are preserved.

Additionally, add one parameter to queuecommand,
	struct Scsi_Host *
and remove one parameter from queuecommand,
	void (*done)(struct scsi_cmnd *)

Scsi_Host* is a convenient pointer that most host drivers need anyway,
and 'done' is redundant to struct scsi_cmnd->scsi_done.

Minimal code disturbance was attempted with this change.  Most drivers
needed only two one-line modifications for their host lock push-down.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16 13:33:23 -08:00
Christoph Hellwig
02e031cbc8 block: remove REQ_HARDBARRIER
REQ_HARDBARRIER is dead now, so remove the leftovers.  What's left
at this point is:

 - various checks inside the block layer.
 - sanity checks in bio based drivers.
 - now unused bio_empty_barrier helper.
 - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while,
   but Xen really needs to sort out it's barrier situaton.
 - setting of ordered tags in uas - dead code copied from old scsi
   drivers.
 - scsi different retry for barriers - it's dead and should have been
   removed when flushes were converted to FS requests.
 - blktrace handling of barriers - removed.  Someone who knows blktrace
   better should add support for REQ_FLUSH and REQ_FUA, though.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:54:09 +01:00
Anil Ravindranath
592488a32b [SCSI] pmcraid: add support for set timestamp command and other fixes
The following are the fixes in this patch:

1. Added support of set timestamp command in the driver
2. Pass all status code to mgmt application. Earlier we were passing
   only failed ones.
3. Call class_destroy after unregister_chrdev and pci_unregister_driver

Signed-off-by: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-29 12:03:01 -05:00
Anil Ravindranath
df30e50596 [SCSI] pmcraid: remove duplicate struct member
sense_buffer is both a direct member of struct pmcraid_cmd as well as
an indirect one via an anonymous union and struct.  Fix this clash by
eliminating the direct member in favour of the anonymous struct/union
one.  The name duplication apparently isn't noticed by gcc versions
earlier than 4.4

Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 12:51:09 -05:00
Mike Christie
a1e0063d0c [SCSI] qla4xxx: Fix cmd check in qla4xxx_cmd_wait
If the command has timedout then the block layer has called
blk_mark_rq_complete. If qla4xxx_cmd_wait is then called
from qla4xxx_eh_host_reset, we will always fail, because if
the driver calls scsi_done then the the block layer will fail
at blk_complete_request's blk_mark_rq_complete call instead of
calling the normal completion path including the function,
blk_queue_end_tag, which releases the tag.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 11:16:56 -05:00
Yang, Bo
e340c35372 [SCSI] megaraid_sas: Version and documentation update
Signed-off-by Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 11:11:12 -05:00
Yang, Bo
707e09bd86 [SCSI] megaraid_sas: Add three times Online controller reset
If fw didn't raise the interrupt with the fw state change to driver
and fw goes to failure state, driver Will check the FW state in
driver's timeout routine and issue the reset if need.  Driver will do
the OCR upto three times until kill adapter.  Also driver will issue
OCR before driver kill adapter even if fw in operational state.

Signed-off-by Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 11:07:07 -05:00
Yang, Bo
1fd1068516 [SCSI] megaraid_sas: Add input parameter for max_sectors
Driver add the input parameters support for max_sectors for megaraid
sas gen2 chip.  Customer can set the max_sectors support to 1MB for
gen2 chip during the driver load.

Signed-off-by Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 11:06:03 -05:00
Yang, Bo
837f5fe89c [SCSI] megaraid_sas: support devices update flag
Driver added the Device update flag to tell LSI application driver
whether to do the device Update.  LSI MegaRAID SAS application will
check this flag to decide if it needs to update the Device or not.

Signed-off-by Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 11:05:37 -05:00
Boaz Harrosh
6dd1d8a795 [SCSI] libosd: write/read_sg_kern API
This is a trivial addition to the SG API that can receive kernel
pointers. It is only used by the out-of-tree test module. So
it's immediate need is questionable. For maintenance ease it might
just get in, as it's very small.

John.
do you need this in the Kernel, or is it only for osd_ktest.ko?

Signed-off-by: John A. Chandy <john.chandy@uconn.edu>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 10:42:35 -05:00
Boaz Harrosh
e96e72c45a [SCSI] libosd: Support for scatter gather write/read commands
This patch adds the Scatter-Gather (sg) API to libosd.
Scatter-gather enables a write/read of multiple none-contiguous
areas of an object, in a single call. The extents may overlap
and/or be in any order.

The Scatter-Gather list is sent to the target in what is called
a "cdb continuation segment". This is yet another possible segment
in the osd-out-buffer. It is unlike all other segments in that it
sits before the actual "data" segment (which until now was always
first), and that it is signed by itself and not part of the data
buffer. This is because the cdb-continuation-segment is considered
a spill-over of the CDB data, and is therefor signed under
OSD_SEC_CAPKEY and higher.

TODO: A new osd_finalize_request_ex version should be supplied so
the @caps received on the network also contains a size parameter
and can be spilled over into the "cdb continuation segment".

Thanks to John Chandy <john.chandy@uconn.edu> for the original
code, and investigations. And the implementation of SG support
in the osd-target.

Original-coded-by: John Chandy <john.chandy@uconn.edu>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 10:42:34 -05:00
Boaz Harrosh
c4df46c49d [SCSI] libosd: Free resources in reverse order of allocation
At osd_end_request first free the request that might
point to pages, then free these pages. In reverse order
of allocation. For now it's just anal neatness. When we'll
use mempools It'll also pay in performance.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 10:42:31 -05:00
Boaz Harrosh
ec6a0a41b5 [SCSI] libosd: Fix bug in attr_page handling
The _osd_req_finalize_attr_page was off by a mile, when trying to
append the enc_get_attr segment instead of the proper set_attr segment.

Also properly support when we don't have any attribute to set while
getting a full page. And when clearing an attribute by setting it's
size to zero.

Reported-by: John Chandy <john.chandy@uconn.edu>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 10:42:30 -05:00
James Smart
391cbf46f2 [SCSI] lpfc 8.3.18: Update lpfc driver version to 8.3.18
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 10:42:29 -05:00
James Smart
f0d9bccc90 [SCSI] lpfc 8.3.18: Add new WQE support
- Add new WQE fields as defined by new SLI interface to support new hardware.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 10:42:29 -05:00
James Smart
5989b8d4dc [SCSI] lpfc 8.3.18: Fix critical errors
Fix critical errors

- Update send_scsi_event to validate pnode pointer active before copying
  the wwpn information.
- Add a message, mailbox_idle, and unlock before failing SECURITY_MGMT
  or AUTH_PORT mailbox commands
- Prevent spin_lock_irqsave from being called twice in a row.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 10:42:27 -05:00
James Smart
5af5eee7ca [SCSI] lpfc 8.3.18: Adapter Shutdown and Unregistration cleanup
Adapter Shutdown and Unregistration cleanup

- Correct the logic around hba shutdown. Prior to final reset, the
  driver must wait for all XRIs to return from the adapter. Added logic
  to poll, progressively slowing the poll rate as delay gets longer.
- Correct behavior around the rsvd1 field in UNREG_RPI_ALL mailbox
  completion and final rpi cleanup.
- Updated logic to move pending VPI registrations to their completion
  in cases where a CVL may be received while registration in progress.
- Added unreg all rpi mailbox command before unreg vpi.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 10:42:27 -05:00
James Smart
a93ff37a8a [SCSI] lpfc 8.3.18: Add logic to detect last devloss timeout
Added driver logic to detect the last devloss timeout of remote nodes which
was still in use of FCF. At that point, the driver should set the last
in-use remote node devloss timeout flag if it was not already set and should
perform proper action on the in-use FCF and recover of FCF from firmware,
depending on the state the driver's FIP engine is in.

Find eligible FCF through FCF table rescan or the next new FCF event when
FCF table rescan turned out empty eligible FCF, and the successful flogi
into an FCF shall clear the HBA_DEVLOSS_TMO flag, indicating the successful
recovery from devloss timeout.

[jejb: add delay.h include to lpfc_hbadisc.c to fix ppc compile]
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 10:40:49 -05:00
James Smart
12265f68ae [SCSI] lpfc 8.3.18: Add support of received ELS commands
Add support of received ELS commands

- Add support for received RLS ELS command
- Add support for received ECHO ELS command
- Add support for received RTV ELS command

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:36:18 -05:00
James Smart
5ac6b30383 [SCSI] lpfc 8.3.18: FC/FCoE Discovery fixes
FC/FCoE Discovery fixes:

- Call the lpfc_drain_txq only for SLI4 hba
- In lpfc_cmpl_els_fdisc, fix code path that does not free IOCB.
- Treated firmware matching FCF property with different index as error
- Propagate error returns from lpfc_issue_els_flogi()
- Refactored lpfc_unregister_unused_fcf() to create a post
  lpfc_dev_loss_tmo handler call for SLI-4 devices. Allows checking of
  fcf after last ndlp released so that fcf can be released if no longer
  in use.
- Replaced individual FCF_XXXX_DISC flag clearing in lieu of aggregate
  FCF_DISCOVERY flag upon succesful completion of flogi.
- Correct setting of altBbCredit value in sparams to correct issue with
  logins with remote loop-based devices.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:35:36 -05:00
Wayne Boyer
32622bdea0 [SCSI] ipr: add definitions for a new adapter
There was an addition to the hardware roadmap that includes a new adapter.
This patch adds the new definitions for the adapter.

Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:29:02 -05:00
Jing Huang
5fbe25c7a6 [SCSI] bfa: fix comments for c files
This patch addresses the comments from Randy Dunlap (Randy.Dunlap@oracle.com)
regarding comment blocks that begining with "/**". bfa driver comments
currently do not follow kernel-doc convention, we hence replace all
/** with /* and **/ with */.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:28:09 -05:00
Jing Huang
acdc79a60c [SCSI] bfa: fix comments for header files
This patch addresses the comments from Randy Dunlap (Randy.Dunlap@oracle.com)
regarding comment blocks that begining with "/**". bfa driver comments
currently do not follow kernel-doc convention, we hence replace all
/** with /* and **/ with */.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:26:57 -05:00
Jing Huang
e0a08a30c9 [SCSI] bfa: fix frame size over 1024 compile warning
Fix compile warning for frame size over 1024 in gcc 4.4.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:25:35 -05:00
Jing Huang
5344026065 [SCSI] bfa: remove os wrapper functions and macros
This patch replaces register access functions and macros with the the ones
provided by linux.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:18:20 -05:00
Jing Huang
ba816ea8e2 [SCSI] bfa: replace endian swap macros with the ones provided by linux
Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:17:14 -05:00
Jing Huang
6a18b1675f [SCSI] bfa: remove os wrapper and unused functions
This patch removes os wrapper and unused functions.
bfa_os_assign(), bfa_os_memset(), bfa_os_memcpy(), bfa_os_udelay()
bfa_os_vsprintf(), bfa_os_snprintf(), and bfa_os_get_clock() are replaced with
direct assignment or native linux functions. Some unused functions related to VF
(Vitual fabric) are also removed.

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:15:58 -05:00
Chauhan, Vijay
156606768c [SCSI] scsi_dh_rdac: Add two new SUN devices to rdac_dev_list
Signed-off-by: Vijay Chauhan <vijay.chauhan@lsi.com>
Acked-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:13:24 -05:00
Karen Xie
150cca7c0e [SCSI] cxgb4i: ignore informational act-open-rpl message
Ignore active open reply with status negative advice. This is an
informational message.

Signed-off-by: Karen Xie <kxie@chelsio.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:09:57 -05:00
Giridhar Malavali
38170fa8e6 [SCSI] qla2xxx: Avoid depending on SCSI host_lock in queuecommand function.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:04:12 -05:00
Andrew Vasquez
9dac0d9a93 [SCSI] qla2xxx: Correct PRLI failure response code handling.
This patch fixes an issue which causes the firmware to fail with a
'PRLI failed' status code (iop1 = 405). This status triggers the
driver to fall into an incorrect code-path which does not attempt
a login retry.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:03:57 -05:00
Mike Christie
170babc372 [SCSI] qla2xxx: Drop srb reference before waiting for completion.
This patch fixes a regression introduced by commit
083a469db4

qla2xxx_eh_wait_on_command() is waiting for an srb to
complete, which will never happen as the routine took
a reference to the srb previously and will only drop it
after this function. So every command abort will fail.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:03:39 -05:00
Madhuranath Iyengar
e30d175648 [SCSI] qla2xxx: Addition of shutdown callback handler.
This patch adds a shutdown handler to qla2xxx driver to make sure that all
DMA and firmware activities are stopped, and any associated driver resources
are released. The need for this handler arose when executing kexec in specific
environments caused the data of the 2nd kernel to be corrupted, due to DMA
activities.

Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:03:18 -05:00
Andrew Vasquez
339aa70ecb [SCSI] qla2xxx: Initialize the vport_slock spinlock.
Commit feafb7b171 neglected to initialize
the spinlock.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:02:57 -05:00
Madhuranath Iyengar
09d1dc2a00 [SCSI] qla2xxx: Remove scsi_cmnd->serial_number from debug traces
This patch cleans up any printk or debug tracing of the the
serial_number field in the qla2xxx driver.

Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:02:38 -05:00
Harish Zunjarrao
f19af1636b [SCSI] qla2xxx: Add flash read/update support using BSG interface
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:00:40 -05:00
Chad Dupuis
ff454b01b4 [SCSI] qla2xxx: Group CS_RESET return status with other link level event statuses.
Currently when we receive a CS_RESET as a response for a SCSI command the
driver will return DID_TRANSPORT_DISRUPTED back to the SCSI mid-layer.  There
are certain circumstances where this could cause the mid-layer to exhaust all of
its retries if the FC port goes away for a short time.  This will result in
commands being prematurly failed.  Moving the CS_RESET return code to be
grouped with other link level events will cause the FC transport layer to block
that target's queue thus preventing the premature exhaustion of retries.

Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25 16:00:22 -05:00