Commit Graph

343 Commits

Author SHA1 Message Date
Stephen Rothwell
b877b90f22 [PATCH] Create vio_register_device
Take some assignments out of vio_register_device_common and
rename it to vio_register_device.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:23:47 +10:00
Stephen Rothwell
5c0b4b8759 [PATCH] Formatting changes to vio.c
Formatting changes to vio.c to bring it closer to the
kernel coding standard.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:08:53 +10:00
Stephen Rothwell
1e4a79e045 [PATCH] fix iSeries build for gcc-3.4
gcc 3.4 (at least the build we are using) puts the gcc generated .ident
string into a .note section at the end of the files it compiles (gcc
3.3.3-hammer and gcc 4.0.2 Debian puts it in the .text section).  This
means that the lparmap.s file we produce in the iSeries build may end with
a .note section.  When we include it into head.S, the assembler can no
longer resolve some of the conditional branches since the target label
ends up too far away.  This patch just forces us back to the .text section
after including lparmap.s.

The breakage was caused by my patch "iSeries build with newer assemblers
and compilers" (sha1-id: 2ad5649662).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:08:53 +10:00
David Gibson
2739e8cf11 [PATCH] Restore lparmap.s include for iSeries
A mistake rebasing the series of ppc64 head.S cleanup patches meant
the #include of lparmap.s, needed for iSeries was lost.  This patch
puts it back again.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 12:59:48 +10:00
Linus Torvalds
40193713df Merge HEAD from master.kernel.org:/pub/scm/linux/kernel/git/paulus/ppc64-2.6 2005-08-29 17:11:29 -07:00
Steven Rostedt
69be8f1896 [PATCH] convert signal handling of NODEFER to act like other Unix boxes.
It has been reported that the way Linux handles NODEFER for signals is
not consistent with the way other Unix boxes handle it.  I've written a
program to test the behavior of how this flag affects signals and had
several reports from people who ran this on various Unix boxes,
confirming that Linux seems to be unique on the way this is handled.

The way NODEFER affects signals on other Unix boxes is as follows:

1) If NODEFER is set, other signals in sa_mask are still blocked.

2) If NODEFER is set and the signal is in sa_mask, then the signal is
still blocked. (Note: this is the behavior of all tested but Linux _and_
NetBSD 2.0 *).

The way NODEFER affects signals on Linux:

1) If NODEFER is set, other signals are _not_ blocked regardless of
sa_mask (Even NetBSD doesn't do this).

2) If NODEFER is set and the signal is in sa_mask, then the signal being
handled is not blocked.

The patch converts signal handling in all current Linux architectures to
the way most Unix boxes work.

Unix boxes that were tested:  DU4, AIX 5.2, Irix 6.5, NetBSD 2.0, SFU
3.5 on WinXP, AIX 5.3, Mac OSX, and of course Linux 2.6.13-rcX.

* NetBSD was the only other Unix to behave like Linux on point #2. The
main concern was brought up by point #1 which even NetBSD isn't like
Linux.  So with this patch, we leave NetBSD as the lonely one that
behaves differently here with #2.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29 10:03:11 -07:00
David Gibson
c594adad56 [PATCH] Dynamic hugepage addresses for ppc64
Paulus, I think this is now a reasonable candidate for the post-2.6.13
queue.

Relax address restrictions for hugepages on ppc64

Presently, 64-bit applications on ppc64 may only use hugepages in the
address region from 1-1.5T.  Furthermore, if hugepages are enabled in
the kernel config, they may only use hugepages and never normal pages
in this area.  This patch relaxes this restriction, allowing any
address to be used with hugepages, but with a 1TB granularity.  That
is if you map a hugepage anywhere in the region 1TB-2TB, that entire
area will be reserved exclusively for hugepages for the remainder of
the process's lifetime.  This works analagously to hugepages in 32-bit
applications, where hugepages can be mapped anywhere, but with 256MB
(mmu segment) granularity.

This patch applies on top of the four level pagetable patch
(http://patchwork.ozlabs.org/linuxppc64/patch?id=1936).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:38 +10:00
Michael Ellerman
9a5573e378 [PATCH] ppc64: Check of_chosen in check_for_initrd()
You can't call get_property() on a NULL node, so check if of_chosen is set
in check_for_initrd().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

 arch/ppc64/kernel/setup.c |   20 ++++++++++++--------
 1 files changed, 12 insertions(+), 8 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:38 +10:00
Michael Ellerman
95920324f5 [PATCH] ppc64: unflatten_device_tree() should check if lmb_alloc() fails
unflatten_device_tree() doesn't check if lmb_alloc() succeeds or not, it
should. All it can do is panic, but at least there's an error message
(assuming you have some sort of console at that point).

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

 arch/ppc64/kernel/prom.c |    9 +++++++--
 1 files changed, 7 insertions(+), 2 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:38 +10:00
Michael Ellerman
145ec7d51a [PATCH] ppc64: Fix a misleading printk in unflatten_dt_node()
When unflatten_dt_node() fails to find an OF_DT_END_NODE tag it prints
"Weird tag at start of node", this should be "Weird tag at end of node".

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

 arch/ppc64/kernel/prom.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:38 +10:00
Michael Ellerman
180a33627d [PATCH] ppc64: Move ppc64_enable_pmcs() logic into a ppc_md function
This patch moves power4_enable_pmcs() to arch/ppc64/kernel/pmc.c.

I've tested it on P5 LPAR and P4. It does what it used to.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:38 +10:00
Olaf Hering
b13cfd173f [PATCH] ppc64: allow xmon=off
If both CONFIG_XMON and CONFIG_XMON_DEFAULT is enabled in the .config,
there is no way to disable xmon again. setup_system calls first xmon_init,
later parse_early_param. So a new 'xmon=off' cmdline option will do the right
thing.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:37 +10:00
Michael Ellerman
bef5686229 [PATCH] ppc64: Remove CONFIG_MSCHUNKS
We can now remove CONFIG_MSCHUNKS as it doesn't do anything interesting
anymore.

The only macro in abs_addr.h which is called by non-iSeries code is
phys_to_abs(), so remove the other dummy implementations, and we add a
firmware feature check to phys_to_abs().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:37 +10:00
Michael Ellerman
71e1f55ad4 [PATCH] ppc64: Simplify some lmb functions
lmb_phys_mem_size() can always return lmb.memory.size, as long as it's called
after lmb_analyze(), which it is. There's no need to recalculate the size on
every call.

lmb_analyze() was calculating a few things we then threw away, so just don't
calculate them to start with.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:37 +10:00
Michael Ellerman
180379dcef [PATCH] ppc64: Remove physbase from the lmb_property struct
We no longer need the lmb code to know about abs and phys addresses, so
remove the physbase variable from the lmb_property struct.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:37 +10:00
Michael Ellerman
e88bcd1b29 [PATCH] ppc64: Remove redundant abs_to_phys() macro
abs_to_phys() is a macro that turns out to do nothing, and also has the
unfortunate property that it's not the inverse of phys_to_abs() on iSeries.

The following is for my benefit as much as everyone else.

With CONFIG_MSCHUNKS enabled, the lmb code is changed such that it keeps
a physbase variable for each lmb region. This is used to take the possibly
discontiguous lmb regions and present them as a contiguous address space
beginning from zero.

In this context each lmb region's base address is its "absolute" base
address, and its physbase is it's "physical" address (from Linux's point of
view). The abs_to_phys() macro does the mapping from "absolute" to "physical".

Note: This is not related to the iSeries mapping of physical to absolute
(ie. Hypervisor) addresses which is maintained with the msChunks structure.
And the msChunks structure is not controlled via CONFIG_MSCHUNKS.

Once upon a time you could compile for non-iSeries with CONFIG_MSCHUNKS
enabled. But these days CONFIG_MSCHUNKS depends on CONFIG_PPC_ISERIES, so
for non-iSeries code abs_to_phys() is a no-op.

On iSeries we always have one lmb region which spans from 0 to
systemcfg->physicalMemorySize (arch/ppc64/kernel/iSeries_setup.c line 383).
This region has a base (ie. absolute) address of 0, and a physbase address
of 0 (as calculated in lmb_analyze() (arch/ppc64/kernel/lmb.c line 144)).

On iSeries, abs_to_phys(aa) is defined as lmb_abs_to_phys(aa), which finds
the lmb region containing aa (and there's only one, ie. 0), and then does:

 return lmb.memory.region[0].physbase + (aa - lmb.memory.region[0].base)

physbase == base == 0, so you're left with "return aa".

So remove abs_to_phys(), and lmb_abs_to_phys() which is the implementation
of abs_to_phys() for iSeries.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:37 +10:00
Michael Ellerman
a4a0f97020 [PATCH] ppc64: Remove redundant use of pointers in lmb code
The lmb code is all written to use a pointer to an lmb struct. But it's always
the same lmb struct, called "lmb". So we take the address of lmb, call it
_lmb and then start using _lmb->foo everywhere, which is silly.

This patch removes the _lmb pointers and replaces them with direct references
to the one "lmb" struct. We do the same for some _mem and _rsv pointers which
point to lmb.memory and lmb.reserved respectively.

This patch looks quite busy, but it's basically just:
s/_lmb->/lmb./g
s/_mem->/lmb.memory./g
s/_rsv->/lmb.reserved./g
s/_rsv/&lmb.reserved/g
s/mem->/lmb.memory./g

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:36 +10:00
Michael Ellerman
aefd16b0c5 [PATCH] ppc64: Remove redundant uses of physRpn_to_absRpn
physRpn_to_absRpn is a no-op on non-iSeries platforms, remove the two
redundant calls.

There's only one caller on iSeries so fold the logic in there so we can get
rid of it completely.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:36 +10:00
Michael Ellerman
56e97b71bf [PATCH] ppc64: Rename msChunks structure
Rename the msChunks struct to get rid of the StUdlY caps and make it a bit
clearer what it's for.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:36 +10:00
Michael Ellerman
34c8f6961f [PATCH] ppc64: msChunks cleanups
Chunks are 256KB, so use constants for the size/shift/mask, rather than
getting them from the msChunks struct. The iSeries debugger (??) might still
need access to the values in the msChunks struct, so we keep them around
for now, but set them from the constant values.

Replace msChunks_entry typedef with regular u32.

Simplify msChunks_alloc() to manipulate klimit directly, rather than via
a parameter.

Move msChunks_alloc() and msChunks into iSeries_setup.c, as that's where
they're used.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:35 +10:00
Michael Ellerman
38e85dc180 [PATCH] ppc64: Remove PTRRELOC() from msChunks code
The msChunks code was written to work on pSeries, but now it's only used on
iSeries. This means there's no need to do PTRRELOC anymore, so remove it all.

A few places were getting "extern reloc_offset()" from abs_addr.h, move it
into system.h instead.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:35 +10:00
Stephen Rothwell
aed3135194 [PATCH] ppc64: introduce FW_FEATURE_ISERIES
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:35 +10:00
Stephen Rothwell
8d15a3e55f [PATCH] ppc64: make firmware_has_feature() stronger
Make firmware_has_feature() evaluate at compile time for the non pSeries
case and tidy up code where possible.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:35 +10:00
Stephen Rothwell
1ababe1148 [PATCH] ppc64: create firmware_has_feature()
Create the firmware_has_feature() inline and move the firmware feature
stuff into its own header file.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:35 +10:00
Stephen Rothwell
7a6af5e380 [PATCH] ppc64: remove firmware features from cpu_spec
The firmware_features field of struct cpu_spec should really be a separate
variable as the firmware features do not depend on the chip and the
bitmask is constructed independently.  By removing it, we save 112 bytes
from the cpu_specs array and we access the bitmask directly instead of via
the cur_cpu_spec pointer.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:34 +10:00
David Gibson
6fbb49d56d [PATCH] Move variables in ppc64 head.S from .data to .bss
The ppc64 head.S defines several zero-initialized structures, such as
the empty_zero_page and the kernel top-level pagetable.  Currently
they are defined to be in the data section.  However, they're not used
until after the bss is cleared, so this patch moves them to the bss,
saving two and a half pages from the vmlinux.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:34 +10:00
David Gibson
91a57fc672 [PATCH] Tweak comments in ppc64 head.S
This patch adjust some comments in head.S for accuracy, clarity, and
spelling.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:34 +10:00
David Gibson
1d086e6bd6 [PATCH] Remove unneeded #defines in head.S
arch/ppc64/kernel/head.S #defines SECONDARY_PROCESSORS then has some
#ifdefs based on it.  Whatever purpose this had is long lost, this
patch removes it.

Likewise, head.S defines H_SET_ASR, which is now defined, along with
other hypervisor call numbers in hvcall.h.  This patch deletes it, as
well, from head.S.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:34 +10:00
David Gibson
60ba449457 [PATCH] Fix apparent code overlap in ppc64 head.S
An #if/#else construct near the top of ppc64's head.S appears to
create overlapping sections of code for iSeries and pSeries (i.e. one
thing on iSeries and something different in the same place on
pSeries).  In fact, checking the various absolute offsets, it doesn't.
This patch unravels the #ifdefs to make it more obvious what's going
on.  This accomplishes another microstep towards a single kernel image
which can boot both iSeries and pSeries.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:34 +10:00
David Gibson
0ab20002f4 [PATCH] Remove general use functions from head.S
As well as the interrupt vectors and initialization code, head.S
contains several asm functions which are used during runtime.  This
patch moves these to misc.S, a more sensible location for random asm
support code.  A couple The functions moved are:
	disable_kernel_fp
	giveup_fpu
	disable_kernel_altivec
	giveup_altivec
	__setup_cpu_power3	(empty function)

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:33 +10:00
David Gibson
c59c464a3e [PATCH] Change address of ppc64 initial segment table
On ppc64 machines with segment tables, CPU0's segment table is at a
fixed address, currently 0x9000.  This patch moves it to the free
space at 0x6000, just below the fwnmi data area.  This saves 8k of
space in vmlinux and the runtime kernel image.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:33 +10:00
David Gibson
ec465515ee [PATCH] Move iSeries and common vectors into unused space in head.S
In the ppc64 kernel head.S there is currently quite a lot of unused
space between the naca (at fixed address 0x4000) and the fwnmi data
area (at fixed address 0x7000).  This patch moves various exception
vectors and support code into this region to use the wasted space.

The functions load_up_fpu and load_up_altivec are moved down as well,
since they are essentially continuations of the fp_unavailable_common
and altivec_unavailable_common vectors, respectively.

Likewise, the fwnmi vectors themselves are moved down into this area,
because while the location of the fwnmi data area is fixed by the RPA,
the vectors themselves can be anywhere sufficiently low.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:33 +10:00
David Gibson
2e2446ea07 [PATCH] Remove NACA fixed address constraint
Comments in head.S suggest that the iSeries naca has a fixed address,
because tools expect to find it there.  The only tool which appears to
access the naca is addRamDisk, but both the in-kernel version and the
version used in RHEL and SuSE in fact locate the NACA the same way as
the hypervisor does, by following the pointer in the hvReleaseData
structure.

Since the requirement for a fixed address seems to be obsolete, this
patch removes the naca from head.S and replaces it with a normal C
initializer.

For good measure, it removes an old version of addRamDisk.c which was
sitting, unused, in the ppc32 tree.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:33 +10:00
Stephen Rothwell
19dbd0f6a7 [PATCH] ppc64: split pSeries specific parts out of vio.c
This patch just splits out the pSeries specific parts of vio.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:32 +10:00
Stephen Rothwell
6312236fe8 [PATCH] ppc64: make the bus matching function platform specific
This patch allows us to have a different bus if matching function for
each platform.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:32 +10:00
Stephen Rothwell
8c65b5c955 [PATCH] ppc64: move iSeries vio iommu init
Since the iSeries vio iommu tables cannot be used until after the vio bus has
been initialised, move the initialisation of the tables to there.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:32 +10:00
Stephen Rothwell
3e494c8048 [PATCH] ppc64: split iSeries specific parts out of vio.c
This patch splits the iSeries specific parts out of vio.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:32 +10:00
Frank Rowand
6020164499 [PATCH] ppc64: change duplicate Kconfig menu "General setup" to "Bus Options"
arch/ppc64/Kconfig defines a "General setup" menu, but also sources
init/Kconfig which also defines a "General setup" menu.  Both of these
menus appear at the top level of make menuconfig.  Having two menus with
the same name is confusing.  This patch renames the ppc64/Kconfig menu to
be "Bus Options" and moves options in this menu which are not bus related
to the end of the "Platform support" menu.

There are many variations among architectures on the exact naming of the
"Bus Options" menu.  I chose to use the simplest one, which is also used
in arch/ppc/Kconfig.

Signed-off-by: Frank Rowand <frowand@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:32 +10:00
Jake Moilanen
293da76b3d [PATCH] ppc64: PCI device-node failure detection
OpenFirmware marks devices as failed in the device-tree when a hardware
problem is detected.  The kernel needs to fail config reads/writes to
prevent a kernel crash when incorrect data is read.

This patch validates that the device-node is not marked "fail" when
config space reads/writes are attempted.

Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:31 +10:00
Benjamin Herrenschmidt
34153fa3af [PATCH] flattened device tree changes
This patch updates the format of the flattened device-tree passed
between the boot trampoline and the kernel to support a more compact
representation, for use by embedded systems mostly.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:31 +10:00
David Gibson
e28f7faf05 [PATCH] Four level pagetables for ppc64
Implement 4-level pagetables for ppc64

This patch implements full four-level page tables for ppc64, thereby
extending the usable user address range to 44 bits (16T).

The patch uses a full page for the tables at the bottom and top level,
and a quarter page for the intermediate levels.  It uses full 64-bit
pointers at every level, thus also increasing the addressable range of
physical memory.  This patch also tweaks the VSID allocation to allow
matching range for user addresses (this halves the number of available
contexts) and adds some #if and BUILD_BUG sanity checks.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:31 +10:00
Olaf Hering
decd300b30 [PATCH] ppc64: make arch/ppc64/boot standalone
Make the bootheader for ppc64 independent from kernel and libc headers.
* add -nostdinc -isystem $gccincludes to not include libc headers
* declare all functions in header files, also the stuff from string.S
* declare some functions static
* use stddef.h to get size_t (hopefully ok)
* remove ppc32-types.h, only elf.h used the __NN types

With further modifications by Paul Mackerras and Stephen Rothwell.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:31 +10:00
David Woodhouse
efda945204 Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-08-27 14:30:07 +02:00
David Woodhouse
17888225c2 Fix missing audit_syscall_exit() on ppc64 sigsuspend exit path
When we leave sigsuspend() directly into a signal handler, we don't want
to go via the normal syscall exit path -- it'll corrupt r4 and r5 which
are supposed to be giving information to the signal handler, and it'll
give us one more single-step SIGTRAP than we need if single-stepping is
in operation.

However, we _should_ be calling audit_syscall_exit(), which would
normally get invoked in that patch. It's not wonderfully pretty, but I
suspect the best answer is just to call it directly...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-08-27 10:23:46 +01:00
Benjamin Herrenschmidt
5477d30e84 [PATCH] ppc64: Export machine_power_off for therm_pm72 module
This patch puts back the export of machine_power_off() that was removed
by some janitor as it's used for emergency shutdown by the G5 thermal
control driver. Wether that driver should use kernel_power_off() instead
is debatable and a post-2.6.13 decision. In the meantime, please commit
that patch that fixes the driver for now.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-24 09:41:35 -07:00
Brian King
ac9af7cba9 [PATCH] ppc64: iommu vmerge fix
This fixes a bug in the PPC64 iommu vmerge code which results in the
potential for iommu_unmap_sg to go off unmapping more than it should.

This was found on a test system which resulted in PCI bus errors due to
PCI memory being unmapped while DMAs were still in progress.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-17 14:41:22 -07:00
Stephen Rothwell
2ad5649662 [PATCH] iSeries build with newer assemblers and compilers
Paulus suggested that we put xLparMap in its own .c file so that we can
generate a .s file to be included into head.S.  This doesn't get around
the problem of having it at a fixed address, but it makes it more
palatable.

It would be good if this could be included in 2.6.13 as it solves our
build problems with various versions of binutils and gcc.  In
particular, it allows us to build an iSeries kernel on Debian unstable
using their biarch compiler.

This has been built and booted on iSeries and built for pSeries and g5.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16 21:06:25 -07:00
Benjamin Herrenschmidt
e62b8b2bc7 [PATCH] ppc64: Fix Fan control for new PowerMac G5 2.7GHz machines
The workaround for broken device-tree that prevents fan control from
working on recent G5 models need to be "enabled" for machines with
revision 0x37 of the bridge in addition to machines with revision 0x35.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-10 11:07:40 -07:00
Paul Mackerras
0f0767c67a [PATCH] ppc64: update defconfigs
Update the default/example configs for ppc64.  Pretty boring...

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-08 11:46:24 -07:00
Arnd Bergmann
2c875bbda9 [PATCH] ppc64: add default config for BPA
This adds a bpa_defconfig file and make target. The config settings
are made for the current version of the Cell Processor Based Blade,
so there are not too many drivers enabled. A few more drivers might
get added in the future though.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-08 11:46:24 -07:00
Tim Yamin
4aad724d3e [PATCH] Update in-kernel zlib routines
These bugs have been fixed in the standard zlib for a while.

See for example

 a) http://sources.redhat.com/ml/bug-gnu-utils/1999-06/msg00183.html
 b) http://bugs.gentoo.org/show_bug.cgi?id=94584

Signed-off-by: Tim Yamin <plasmaroo@gentoo.org>
Signed-off-by: Tavis Ormandy <taviso@gentoo.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-05 16:23:21 -07:00
Dominik Brodowski
43c3473552 [PATCH] pci and yenta: pcibios_bus_to_resource
In yenta_socket, we default to using the resource setting of the CardBus
bridge.  However, this is a PCI-bus-centric view of resources and thus needs
to be converted to generic resources first.  Therefore, add a call to
pcibios_bus_to_resource() call in between.  This function is a mere wrapper on
x86 and friends, however on some others it already exists, is added in this
patch (alpha, arm, ppc, ppc64) or still needs to be provided (parisc -- where
is its pcibios_resource_to_bus() ?).

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-04 21:32:46 -07:00
Paul Mackerras
6d22d85a85 [PATCH] ppc64: fix for kexec boot issue
The kexec boot is not successful on some power machines since all CPUs are
getting removed from global interrupt queue (GIQ) before kexec boot.  Some
systems always expect at least one CPU in GIQ.  Hence, this patch will make
sure that only secondary CPUs are removed from GIQ.

Signed-off-by: Haren Myneni <hbabu@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-04 13:00:55 -07:00
Olof Johansson
75eedfed3e [PATCH] ppc64: Fix UP kernel build
CONFIG_KEXEC breaks UP builds because of a misspelled smp_release_cpus().
Also, the function isn't defined unless built with CONFIG_SMP but it is
needed if we are to go from a UP to SMP kernel.  Enable it and document it.

Thanks to Steven Winiecki for reporting this and to Milton for remembering
how it's supposed to work and why.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-04 13:00:53 -07:00
Haren Myneni
5cb4cc0d82 [PATCH] Xmon bug fix for soft-reset
For soft reset during system hang, got an error "CPU did not take
control" for some CPUs even though they responded to soft-reset (called
SystemReset, die and called debugger - xmon).   First these CPUs entered
into xmon by IPI callback and then got a soft-reset exception and
re-entered into xmon again. The first CPU which re-entered into xmon got
the output lock and made into xmon successfully without unlocking.
Hence, the next CPU(s) which re-entered into xmon try to acquire a lock
(get_output_lock). Therefore, we can not view state of those CPU(s).

[This is a simple, very low risk, obvious fix for an obvious bug, and
should go into 2.6.13.  -- paulus]

Signed-off-by: Haren Myneni <hbabu@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-02 22:16:45 -07:00
Mike Kravetz
96cd5b0856 [PATCH] ppc64: POWER 4 fails to boot with NUMA
If CONFIG_NUMA is set, some POWER 4 systems will fail to boot.  This is
because of special processing needed to handle invalid node IDs (0xffff) on
POWER 4.  My previous patch to handle memory 'holes' within nodes forgot to
add this special case for POWER 4 in one place.

In reality, I'm not sure that configuring the kernel for NUMA on POWER 4 makes
much sense.  Are there POWER 4 based systems with NUMA characteristics that
are presented by the firmware?  But, distros want one kernel for all systems
so NUMA is on by default in their kernels.  The patch handles those cases.

Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 21:38:01 -07:00
Benjamin Herrenschmidt
57ee67af35 [PATCH] ppc64: Fix CONFIG_ALTIVEC not set
The code that sets the altivec capability of the CPU based on firmware
informations can enable altivec when the kernel has CONFIG_ALTIVEC
disabled.  This results in "interesting" crashes.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 19:14:00 -07:00
Robert Love
5fa918b451 [PATCH] ppc64: inotify syscalls
inotify system call support for PPC64

[ I don't think we need sys32 compatibility versions--and if we do, I
failed in life. ]

Signed-off-by: Robert Love <rml@novell.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-30 10:14:46 -07:00
Olaf Hering
44456d37b5 [PATCH] turn many #if $undefined_string into #ifdef $undefined_string
turn many #if $undefined_string into #ifdef $undefined_string to fix some
warnings after -Wno-def was added to global CFLAGS

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:08 -07:00
David Gibson
488f84994c [PATCH] ppc64: remove another fixed address constraint
Presently the LparMap, one of the structures the kernel shares with the
legacy iSeries hypervisor has a fixed offset address in head.S.  This patch
changes this so the LparMap is a normally initialized structure, without
fixed address.  This allows us to use macros to compute some of the values
in the structure, which wasn't previously possible because the assembler
always uses signed-% which gets the wrong answers for the computations in
question.

Unfortunately, a gcc bug means that doing this requires another structure
(hvReleaseData) to be initialized in asm instead of C, but on the whole the
result is cleaner than before.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:58 -07:00
David Gibson
533f08172e [PATCH] ppc64: dynamically allocate segment tables
PPC64 machines before Power4 need a segment table page allocated for each
CPU.  Currently these are allocated statically in a big array in head.S for
all CPUs.  The segment tables need to be in the first segment (so
do_stab_bolted doesn't take a recursive fault on the stab itself), but
other than that there are no constraints which require the stabs for the
secondary CPUs to be statically allocated.

This patch allocates segment tables dynamically during boot, using
lmb_alloc() to ensure they are within the first 256M segment.  This reduces
the kernel image size by 192k...

Tested on RS64 iSeries, POWER3 pSeries, and POWER5.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:58 -07:00
Olaf Hering
6fdfb38281 [PATCH] make a few functions static in pmac_setup.c
Making a few functions static saves a few bytes, but only on ppc32.

     text	   data	    bss	    dec	    hex	filename
  3752421	1605208	 345608	5703237	 570645	../O-ppc64_iSeries_defconfig/vmlinux
  3709411	2042552	 339992	6091955	 5cf4b3	../O-ppc64_maple_defconfig/vmlinux
  5397329	3054824	 679856	9132009	 8b57e9	../O-ppc64_pSeries_defconfig/vmlinux
 -3882695	 417552	 197760	4498007	 44a257	../O-ppc_common_defconfig/vmlinux
 -3414510	 574500	 241440	4230450	 408d32	../O-ppc_pmac_defconfig/vmlinux
 +3882627	 417168	 197760	4497555	 44a093	../O-ppc_common_defconfig/vmlinux
 +3414442	 575428	 241440	4231310	 40908e	../O-ppc_pmac_defconfig/vmlinux

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:57 -07:00
Olaf Hering
1bc3a1ec60 [PATCH] ppc64: update defconfigs
update defconfig, use new CONFIG_HZ and set it to 100 just for the kicks.

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:57 -07:00
Olaf Hering
7b625c001a [PATCH] ppc/ppc64: use Kconfig.hz
use new Kconfig.hz on ppc/ppc64, use also Kconfig.preempt for ppc

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:55 -07:00
Eric W. Biederman
59586e5a26 [PATCH] Don't export machine_restart, machine_halt, or machine_power_off.
machine_restart, machine_halt and machine_power_off are machine
specific hooks deep into the reboot logic, that modules
have no business messing with.  Usually code should be calling
kernel_restart, kernel_halt, kernel_power_off, or
emergency_restart. So don't export machine_restart,
machine_halt, and machine_power_off so we can catch buggy users.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:42 -07:00
Olof Johansson
f264cc2824 [PATCH] ppc64: add 970MP PVR
Add PVR value and tests for 970MP.  Also switch to a simpler (but slightly
longer) check at init time for simplicity.

Signed-off-by: Olof Johansson <olof@austin.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-13 11:25:25 -07:00
David Gibson
96e2844999 [PATCH] ppc64: kill bitfields in ppc64 hash code
This patch removes the use of bitfield types from the ppc64 hash table
manipulation code.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-13 11:25:25 -07:00
Sam Ravnborg
d5950b4355 [NET]: add a top-level Networking menu to *config
Create a new top-level menu named "Networking" thus moving
net related options and protocol selection way from the drivers
menu and up on the top-level where they belong.

To implement this all architectures has to source "net/Kconfig" before
drivers/*/Kconfig in their Kconfig file. This change has been
implemented for all architectures.

Device drivers for ordinary NIC's are still to be found
in the Device Drivers section, but Bluetooth, IrDA and ax25
are located with their corresponding menu entries under the new
networking menu item.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 21:03:49 -07:00
Anton Blanchard
059e277e5b [PATCH] ppc64: silence perfmon exception warnings
We dont need to use the PERFMON exception on POWER5, in fact the firmware
returns an error.  Due to this just remove the warning.

Also now that we have proper runlatch support we can remove the bootup
hack.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:42 -07:00
Michael Ellerman
b6bff397ea [PATCH] ppc64: Be consistent about printing which idle loop we're using
Not sure if we really need this, but it was handy to know which iSeries loop I
was testing.

Be consistent about printing which idle loop we're using, with this patch we
cover all cases.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:42 -07:00
Anton Blanchard
10ca1e1ed5 [PATCH] ppc64: fix compile warning
Fix a compile warning introduced by the previous patches.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:41 -07:00
Anton Blanchard
45e75dfb60 [PATCH] ppc64: idle fixups
- remove some unnecessary includes
- add runlatch support
- no need to use raw_smp_processor_id any more, current preempt debug
  logic checks for processes that are bound to one cpu.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:41 -07:00
Anton Blanchard
050a09389e [PATCH] ppc64: pSeries idle fixups
- separate out sleep logic in dedicated_idle, it was so far indented
  that it got squashed against the right side of the screen.
- add runlatch support, looping on runlatch disable.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:41 -07:00
Anton Blanchard
3c57bb9f45 [PATCH] ppc64: iSeries idle fixups
- remove min/max yield time, we dont use the values anywhere
- separate shared and dedicated idle loops
- check need_resched again with irqs off to avoid sleeping with pending work
- continually set runlatch off in idle loop, this means we dont need to
  turn the runlatch off on exception exit and suffer that associated
  cost for all exceptions. (A future patch will turn the runlatch on at
  exception entry)

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:41 -07:00
Michael Ellerman
08d5e3eb4b [PATCH] ppc64: Remove obsolete idle_setup()
Now that the idle loop is configured by each platform we don't need
idle_setup() anymore.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:41 -07:00
Michael Ellerman
62d60e9f0f [PATCH] ppc64: Fixup platforms for new ppc_md.idle
This patch fixes up iSeries, pSeries, pmac and maple to set the correct idle
function for each platform.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:41 -07:00
Michael Ellerman
c66d5dd6b5 [PATCH] ppc64: Move pSeries idle functions into pSeries_setup.c
dedicated_idle() and shared_idle() are only used by pSeries, so move them into
pSeries_setup.c

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:41 -07:00
Michael Ellerman
d200903e11 [PATCH] ppc64: Move iSeries_idle() into iSeries_setup.c
Move iSeries_idle() into iSeries_setup.c, no one else needs to know about it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:40 -07:00
Michael Ellerman
fd899c0cc7 [PATCH] ppc64: Make idle_loop a ppc_md function
This patch adds an idle member to the ppc_md structure and calls it from
cpu_idle().  If a platform leaves ppc_md.idle as null it will get the default
idle loop default_idle().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:40 -07:00
Milton Miller
70b234a401 [PATCH] hvc_console: Separate the NUL character filtering from get_hvc_chars
Separate the NUL character filtering from get_hvc_chars.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:40 -07:00
Milton Miller
acad9559f1 [PATCH] hvc_console: Separate hvc_console and vio code 2
Remove all the vio device driver code from hvc_console.c

This will allow us to separate hvsi, hvc, and allow hvc_console to be used
without the ppc64 vio layer.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:39 -07:00
Milton Miller
d5ee257c33 [PATCH] hvc_console: Separate hvc_console and vio code
Separate the console setup routines of the hvc_console and the vio layer.

Remove the call to find_init_vty from hvc_console.c.

Fail the setup routine if the console doesn't exist, but register the console
again when the specified channel is instantiated.  This scheme maintains the
print buffer semantics while eliminating callout and call back for the console
code.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:39 -07:00
Anton Blanchard
79c2cc7b6d [PATCH] ppc64: add ioprio syscalls
- Clean up sys32_getpriority comment.
- Add ioprio syscalls, and sign extend 32bit versions.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:37 -07:00
Anton Blanchard
4416f3968a [PATCH] ppc64: sys_ppc32.c cleanups
Remove some unnecessary includes, an out of date comment and a prototype for
sys_timer_create (which is now in syscalls.h)

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:37 -07:00
Anton Blanchard
8dc4fd87f2 [PATCH] ppc64: Turn runlatch on in exception entry
Enable the runlatch at the start of each exception.  Unfortunately we are out
of space in the 0x300 handler, so I added it a bit later.

The SPR write is fairly expensive, perhaps we should cache the runlatch state
in the paca and avoid the write when possible.

We don't need to turn the runlatch off, we do that in the idle loop.  Better
to take the hit in the idle loop than for each exception exit.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:37 -07:00
Anton Blanchard
a2f7a9ce2a [PATCH] ppc64: Fix runlatch code to work on pseries machines
Not all ppc64 CPUs have the CTRL SPR, so we need a cputable feature for it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:37 -07:00
Anton Blanchard
315a699851 [PATCH] ppc64: use c99 initialisers in cputable code
Use c99 initialisers in the cputable code.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:36 -07:00
Olaf Hering
2098eec228 [PATCH] ppc64: vdso32: fix link errors after recent toolchain changes
Patch from <amodra@bigpond.net.au>,
http://sources.redhat.com/bugzilla/show_bug.cgi?id=1042

/usr/bin/ld: arch/ppc64/kernel/vdso32/vdso32.so: The first section in the
PT_DYNAMIC segment is not the .dynamic section

Signed-off-by: Olaf Hering <olh@suse.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:36 -07:00
Jeff Mahoney
5e6557722e [PATCH] openfirmware: generate device table for userspace
This converts the usage of struct of_match to struct of_device_id,
similar to pci_device_id.  This allows a device table to be generated,
which can be parsed by depmod(8) to generate a map file for module
loading.

In order for hotplug to work with macio devices, patches to
module-init-tools and hotplug must be applied.  Those patches are
available at:

 ftp://ftp.suse.com/pub/people/jeffm/linux/macio-hotplug/

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-06 12:55:20 -07:00
Rusty Lynch
6772926bef [PATCH] kprobes: fix namespace problem and sparc64 build
The following renames arch_init, a kprobes function for performing any
architecture specific initialization, to arch_init_kprobes in order to
cleanup the namespace.

Also, this patch adds arch_init_kprobes to sparc64 to fix the sparc64 kprobes
build from the last return probe patch.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-05 19:19:00 -07:00
Linus Torvalds
12829dcb10 Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/paulus/ppc64-2.6 2005-06-30 08:48:56 -07:00
Michael Ellerman
719d1cd867 [PATCH] ppc64: Replace custom locking code with a spinlock
The hvlpevent_queue (formally ItLpQueue) has a member called xInUseWord
which is used for serialising access to the queue. Because it's a word
(ie. 32 bit) there's a custom 32-bit version of test_and_set_bit() or
thereabouts in ItLpQueue.c.

The xInUseWord is not shared with they hypervisor, so we can replace it
with a spinlock and remove the custom code.

There is also another locking mechanism (ItLpQueueInProcess). This is
redundant because it's only manipulated while the lock's held. Remove it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:17:02 +10:00
Michael Ellerman
ffe1b7e14e [PATCH] ppc64: Formatting cleanups in arch/ppc64/kernel/ItLpQueue.c
Just formatting cleanups:
 * rename some "nextLpEvent" variables to just "event"
 * make code fit in 80 columns
 * use brackets around if/else
 * use a temporary to make hvlpevent_clear_valid clearer

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:16:48 +10:00
Michael Ellerman
38fcdcfe38 [PATCH] ppc64: Cleanup whitespace in arch/ppc64/kernel/ItLpQueue.c
Just cleanup white space.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:16:28 +10:00
Michael Ellerman
9b0470200a [PATCH] ppc64: Cleanup proc printing of event types
The code that prints event counts by type uses a hand-coded number of tabs
to get the alignment right. Instead use a printf alignment which will allow
allow us to use the event_type strings elsewhere in the future.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:16:18 +10:00
Michael Ellerman
ed094150bd [PATCH] ppc64: Simplify counting of lpevents, remove lpevent_count from paca
Currently there's a per-cpu count of lpevents processed, a per-queue (ie.
global) total count, and a count by event type.

Replace all that with a count by event for each cpu. We only need to add
it up int the proc code.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:16:09 +10:00
Michael Ellerman
74889802a1 [PATCH] ppc64: Don't count number of events processed for caller
Currently we count the number of lpevents processed in 3 seperate places.

One of these counters is never read, so just remove it. This means
hvlpevent_queue_process() no longer needs to return the number of events
processed.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:15:53 +10:00
Michael Ellerman
937b31b114 [PATCH] ppc64: Rename ItLpQueue_* functions to hvlpevent_queue_*
Now that we've renamed the xItLpQueue structure, rename the functions that
operate on it also.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:15:42 +10:00
Michael Ellerman
a61874648d [PATCH] ppc64: Rename xItLpQueue to hvlpevent_queue
The xItLpQueue is a queue of HvLpEvents that we're given by the Hypervisor.
Rename xItLpQueue to hvlpevent_queue and make the type struct hvlpevent_queue.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:15:32 +10:00
Michael Ellerman
ab354b6379 [PATCH] ppc64: Move definition of xItLpQueue
The xItLpQueue is declared in LparData.c, move it into ItLpQueue.c.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:12:21 +10:00
Michael Ellerman
0f6014b37e [PATCH] ppc64: Make two ItLpQueue related functions static
External parties don't need to use ItLpQueue_getNextLpEvent() or
ItLpQueue_clearValid(), they're internal to ItLpQueue.c

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:08:56 +10:00
Michael Ellerman
7b01328d45 [PATCH] ppc64: Move xItLpQueue proc code into ItLpQueue.c
Move the code that displays xItLpQueue values in /proc into
ItLpQueue.c.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:08:44 +10:00
Michael Ellerman
512d31d6a8 [PATCH] ppc64: Move initialisation of xItLpQueue into ItLpQueue.c
The xItLpQueue is initalised manually in iSeries_setup_arch().  Move
this code into ItLpQueue.c for a cleaner separation.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:08:27 +10:00
Michael Ellerman
1b19bc7214 [PATCH] ppc64: Don't pass the pointers to xItLpQueue around
Because there's only one ItLpQueue and we know where it is, ie. xItLpQueue,
there's no point passing pointers to it it around all over the place.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:07:57 +10:00
Michael Ellerman
ee48444b85 [PATCH] ppc64: Reorganise the paca initialisation macros
This patch updates the macros that initialise the paca to remove the lpq
parameter. It also rearranges them a bit with the hope of making them a
bit clearer.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:07:48 +10:00
Michael Ellerman
0c885c175c [PATCH] ppc64: Move set_spread_lpevents() into ItLpQueue.c
The only code outside ItLpQueue.c that refers to spread_lpevents is in
set_apread_lpevents(), so move it inside ItLpQueue.c and make spread_lpevents
static.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:07:33 +10:00
Michael Ellerman
fc07695386 [PATCH] ppc64: Spread lpevents by default on iSeries
With the previous patch in place, spreading lpevents by default becomes
a one liner.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:07:21 +10:00
Michael Ellerman
bea248fb30 [PATCH] ppc64: Remove lpqueue pointer from the paca on iSeries
The iSeries code keeps a pointer to the ItLpQueue in its paca struct. But
all these pointers end up pointing to the one place, ie. xItLpQueue.

So remove the pointer from the paca struct and just refer to xItLpQueue
directly where needed.

The only complication is that the spread_lpevents logic was implemented by
having a NULL lpqueue pointer in the paca on CPUs that weren't supposed to
process events. Instead we just compare the spread_lpevents value to the
processor id to get the same behaviour.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30 15:07:09 +10:00
Alan Cox
200803dfe4 [PATCH] irqpoll
Anyone reporting a stuck IRQ should try these options.  Its effectiveness
varies we've found in the Fedora case.  Quite a few systems with misdescribed
IRQ routing just work when you use irqpoll.  It also fixes up the VIA systems
although thats now fixed with the VIA quirk (which we could just make default
as its what Redmond OS does but Linus didn't like it historically).

A small number of systems have jammed IRQ sources or misdescribes that cause
an IRQ that we have no handler registered anywhere for.  In those cases it
doesn't help.

Signed-off-by: Alan Cox <number6@the-village.bc.nu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 21:20:35 -07:00
Olaf Hering
b1bdfbd0a2 [PATCH] remove duplicate printf in arch/ppc64/boot/main.c
initrd size is printed as hex, add a missing 0x
remove a duplicate printf when initrd is used.
remove use of kernel type to access the first bytes of the initrd memarea.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-28 21:01:46 +10:00
Olaf Hering
e6019db5a7 [PATCH] remove printk usage in arch/ppc64/boot/prom.c
remove the printk usage in the zImage. we are not there, yet.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-28 21:01:35 +10:00
Olaf Hering
a58dfbbb2a [PATCH] remove unused arch/ppc64/boot/mknote.c
mknote is not called in arch/ppc64/boot/Makefile

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-28 21:01:28 +10:00
Olaf Hering
45891f7660 [PATCH] remove unused arch/ppc64/boot/piggyback.c
piggyback is not called in arch/ppc64/boot/Makefile

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-28 21:01:21 +10:00
Nathan Lynch
f5f1cc5437 [PATCH] ppc64: don't create spurious symlinks under node0 sysdev
On partitioned systems we can wind up creating spurious symlinks in
/sys/devices/system/node/node0 to non-present cpus.  The symlinks are
not broken; the problem is that we're potentially misinforming
userspace that there is a relationship between node0 and cpus which
are to be added later.  There's no guarantee at all that a cpu which
is added later will belong to node 0.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-28 20:55:25 +10:00
Arnd Bergmann
a341ad9724 [PATCH] ppc64: simplify nvram partition scanning code
Convert nvram_create_os_partition to use list_for_each_entry
instead of list_for_each, as this reduces the code size by
two lines.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-28 20:33:49 +10:00
Greg KH
8644d2a42b Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2005-06-27 22:07:56 -07:00
Michael Ellerman
2311b1f2bb [PATCH] PCI: fix-pci-mmap-on-ppc-and-ppc64.patch
This is an updated version of Ben's fix-pci-mmap-on-ppc-and-ppc64.patch
which is in 2.6.12-rc4-mm1.

It fixes the patch to work on PPC iSeries, removes some debug printks
at Ben's request, and incorporates your
fix-pci-mmap-on-ppc-and-ppc64-fix.patch also.

Originally from Benjamin Herrenschmidt <benh@kernel.crashing.org>

This patch was discussed at length on linux-pci and so far, the last
iteration of it didn't raise any comment.  It's effect is a nop on
architecture that don't define the new pci_resource_to_user() callback
anyway.  It allows architecture like ppc who put weird things inside of
PCI resource structures to convert to some different value for user
visible ones.  It also fixes mmap'ing of IO space on those archs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:45 -07:00
Rusty Lynch
97f7943d70 [PATCH] Return probe redesign: ppc64 specific implementation
The following is a patch provided by Ananth Mavinakayanahalli that implements
the new PPC64 specific parts of the new function return probe design.

NOTE: Since getting Ananth's patch, I changed trampoline_probe_handler()
      to consume each of the outstanding return probem instances (feedback
      on my original RFC after Ananth cut a patch), and also added the
      arch_init() function (adding arch specific initialization.) I have
      cross compiled but have not testing this on a PPC64 machine.

Changes include:
 * Addition of kretprobe_trampoline to act as a dummy function for instrumented
   functions to return to, and for the return probe infrastructure to place
   a kprobe on on, gaining control so that the return probe handler
   can be called, and so that the instruction pointer can be moved back
   to the original return address.
 * Addition of arch_init(), allowing a kprobe to be registered on
   kretprobe_trampoline
 * Addition of trampoline_probe_handler() which is used as the pre_handler
   for the kprobe inserted on kretprobe_implementation.  This is the function
   that handles the details for calling the return probe handler function
   and returning control back at the original return address
 * Addition of arch_prepare_kretprobe() which is setup as the pre_handler
   for a kprobe registered at the beginning of the target function by
   kernel/kprobes.c so that a return probe instance can be setup when
   a caller enters the target function.  (A return probe instance contains
   all the needed information for trampoline_probe_handler to do it's job.)
 * Hooks added to the exit path of a task so that we can cleanup any left-over
   return probe instances (i.e. if a task dies while inside a targeted function
   then the return probe instance was reserved at the beginning of the function
   but the function never returns so we need to mark the instance as unused.)

Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:53 -07:00
Ananth N Mavinakayanahalli
9ec4b1f356 [PATCH] kprobes: fix single-step out of line - take2
Now that PPC64 has no-execute support, here is a second try to fix the
single step out of line during kprobe execution.  Kprobes on x86_64 already
solved this problem by allocating an executable page and using it as the
scratch area for stepping out of line.  Reuse that.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:52 -07:00
Benjamin Herrenschmidt
6ae3db110e [PATCH] ppc64: Add missing exports
This patch adds a couple of missing symbol exports.  flush_dcache_page is
used by the AGP driver and rtc_lock by the RTC driver.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:43 -07:00
Maneesh Soni
72414d3f1d [PATCH] kexec code cleanup
o Following patch provides purely cosmetic changes and corrects CodingStyle
  guide lines related certain issues like below in kexec related files

  o braces for one line "if" statements, "for" loops,
  o more than 80 column wide lines,
  o No space after "while", "for" and "switch" key words

o Changes:
  o take-2: Removed the extra tab before "case" key words.
  o take-3: Put operator at the end of line and space before "*/"

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:55 -07:00
Alexander Nyberg
6e274d1443 [PATCH] kdump: Use real pt_regs from exception
Makes kexec_crashdump() take a pt_regs * as an argument.  This allows to
get exact register state at the point of the crash.  If we come from direct
panic assertion NULL will be passed and the current registers saved before
crashdump.

This hooks into two places:
die(): check the conditions under which we will panic when calling
do_exit and go there directly with the pt_regs that caused the fatal
fault.

die_nmi(): If we receive an NMI lockup while in the kernel use the
pt_regs and go directly to crash_kexec(). We're probably nested up badly
at this point so this might be the only chance to escape with proper
information.

Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:54 -07:00
R Sharada
fce0d57403 [PATCH] ppc64: kexec support for ppc64
This patch implements the kexec support for ppc64 platforms.

A couple of notes:

1)  We copy the pages in virtual mode, using the full base kernel
    and a statically allocated stack.   At kexec_prepare time we
    scan the pages and if any overlap our (0, _end[]) range we
    return -ETXTBSY.

    On PowerPC 64 systems running in LPAR (logical partitioning)
    mode, only a small region of memory, referred to as the RMO,
    can be accessed in real mode.  Since Linux runs with only one
    zone of memory in the memory allocator, and it can be orders of
    magnitude more memory than the RMO, looping until we allocate
    pages in the source region is not feasible.  Copying in virtual
    means we don't have to write a hash table generation and call
    hypervisor to insert translations, instead we rely on the pinned
    kernel linear mapping.  The kernel already has move to linked
    location built in, so there is no requirement to load it at 0.

    If we want to load something other than a kernel, then a stub
    can be written to copy a linear chunk in real mode.

2)  The start entry point gets passed parameters from the kernel.
    Slaves are started at a fixed address after copying code from
    the entry point.

    All CPUs get passed their firmware assigned physical id in r3
    (most calling conventions use this register for the first
    argument).

    This is used to distinguish each CPU from all other CPUs.
    Since firmware is not around, there is no other way to obtain
    this information other than to pass it somewhere.

    A single CPU, referred to here as the master and the one executing
    the kexec call, branches to start with the address of start in r4.
    While this can be calculated, we have to load it through a gpr to
    branch to this point so defining the register this is contained
    in is free.  A stack of unspecified size is available at r1
    (also common calling convention).

    All remaining running CPUs are sent to start at absolute address
    0x60 after copying the first 0x100 bytes from start to address 0.
    This convention was chosen because it matches what the kernel
    has been doing itself.  (only gpr3 is defined).

    Note: This is not quite the convention of the kexec bootblock v2
    in the kernel.  A stub has been written to convert between them,
    and we may adjust the kernel in the future to allow this directly
    without any stub.

3)  Destination pages can be placed anywhere, even where they
    would not be accessible in real mode.  This will allow us to
    place ram disks above the RMO if we choose.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: R Sharada <sharada@in.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:51 -07:00
R Sharada
f4c82d5132 [PATCH] ppc64 kexec: native hash clear
Add code to clear the hash table and invalidate the tlb for native (SMP,
non-LPAR) mode.  Supports 16M and 4k pages.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: R Sharada <sharada@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:51 -07:00
Ingo Molnar
cc19ca86a0 [PATCH] consolidate PREEMPT options into kernel/Kconfig.preempt
This patch consolidates the CONFIG_PREEMPT and CONFIG_PREEMPT_BKL
preemption options into kernel/Kconfig.preempt.  This, besides reducing
source-code, also enables more centralized tweaking of preemption related
options.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:45 -07:00
Zwane Mwaikambo
f370513640 [PATCH] i386 CPU hotplug
(The i386 CPU hotplug patch provides infrastructure for some work which Pavel
is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua
<shaohua.li@intel.com> is doing)

The following provides i386 architecture support for safely unregistering and
registering processors during runtime, updated for the current -mm tree.  In
order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the
cpu_online check in do_IRQ() by modifying fixup_irqs().  The difference being
that on cpu offline, fixup_irqs() is called before we clear the cpu from
cpu_online_map and a long delay in order to ensure that we never have any
queued external interrupts on the APICs.  There are additional changes to s390
and ppc64 to account for this change.

1) Add CONFIG_HOTPLUG_CPU
2) disable local APIC timer on dead cpus.
3) Disable preempt around irq balancing to prevent CPUs going down.
4) Print irq stats for all possible cpus.
5) Debugging check for interrupts on offline cpus.
6) Hacky fixup_irqs() to redirect irqs when cpus go off/online.
7) play_dead() for offline cpus to spin inside.
8) Handle offline cpus set in flush_tlb_others().
9) Grab lock earlier in smp_call_function() to prevent CPUs going down.
10) Implement __cpu_disable() and __cpu_die().
11) Enable local interrupts in cpu_enable() after fixup_irqs()
12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus.
13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline.

Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:29 -07:00
Michael Ellerman
856509d5da [PATCH] ppc64: Fix compile warnings in arch/ppc64/kernel/lparcfg.c
Stephen's patch to remove LparData.h missed an include in lparcfg.c This
fixes a few compile warnings.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:27 -07:00
Andrea Arcangeli
7286aa9b9a [PATCH] ppc64: fix seccomp with 32-bit userland
The seccomp check has to happen when entering the syscall and not when
exiting it or regs->gpr[0] contains garabge during signal handling in
ppc64_rt_sigreturn (this actually might be a bug too, but an orthogonal
one, since we really have to run the check before invoking the syscall and
not after it).

Signed-off-by: Andrea Arcangeli <andrea@cpushare.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:18 -07:00
Linus Torvalds
24665cd00d Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/paulus/ppc64-2.6 2005-06-23 09:49:55 -07:00
Prasanna S Panchamukhi
42cc20600a [PATCH] kprobes: Temporary disarming of reentrant probe for ppc64
This patch includes ppc64 architecture specific changes to support temporary
disarming on reentrancy of probes.

Signed-of-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:25 -07:00
Rusty Lynch
7e1048b11c [PATCH] Move kprobe [dis]arming into arch specific code
The architecture independent code of the current kprobes implementation is
arming and disarming kprobes at registration time.  The problem is that the
code is assuming that arming and disarming is a just done by a simple write
of some magic value to an address.  This is problematic for ia64 where our
instructions look more like structures, and we can not insert break points
by just doing something like:

*p->addr = BREAKPOINT_INSTRUCTION;

The following patch to 2.6.12-rc4-mm2 adds two new architecture dependent
functions:

     * void arch_arm_kprobe(struct kprobe *p)
     * void arch_disarm_kprobe(struct kprobe *p)

and then adds the new functions for each of the architectures that already
implement kprobes (spar64/ppc64/i386/x86_64).

I thought arch_[dis]arm_kprobe was the most descriptive of what was really
happening, but each of the architectures already had a disarm_kprobe()
function that was really a "disarm and do some other clean-up items as
needed when you stumble across a recursive kprobe." So...  I took the
liberty of changing the code that was calling disarm_kprobe() to call
arch_disarm_kprobe(), and then do the cleanup in the block of code dealing
with the recursive kprobe case.

So far this patch as been tested on i386, x86_64, and ppc64, but still
needs to be tested in sparc64.

Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:21 -07:00
Ian Campbell
0f8e2d62fa [PATCH] use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh
The attached patch causes the various arch specific install.sh scripts to
look for ${CROSS_COMPILE}installkernel rather than just installkernel (in
both /sbin/ and ~/bin/ where the script already did this).  This allows you
to have e.g.  arm-linux-installkernel as a handy way to install on your
cross target.  It also prevents the script picking up on the host
/sbin/installkernel which causes the script to fall through and do the
install itself (which is what I actually use myself, with $INSTALL_PATH
set).

I don't believe it causes back-compatibility problems since calling the
host installkernel was never likely to work or be what you wanted when
cross compiling anyway.  If $CROSS_COMPILE isn't set then nothing changes.

I only use ARM and i386 myself but I figured it couldn't hurt to do the
whole lot.  I've cc'd those who I hope are the arch maintainers for files
that I've touched.

Signed-off-by: Ian Campbell <icampbell@arcom.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:07 -07:00
Andy Whitcroft
145e664231 [PATCH] ppc64: sparsemem memory model
Provide the architecture specific implementation for SPARSEMEM for PPC64
systems.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> (in part)
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:06 -07:00
Andy Whitcroft
74b30be2e1 [PATCH] ppc64: add memory present
Provide hooks for PPC64 to allow memory models to be informed of installed
memory areas.  This allows SPARSEMEM to instantiate mem_map for the populated
areas.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:05 -07:00
Andy Whitcroft
510f8fa7ba [PATCH] ppc64: add early_pfn_to_nid
Provide an implementation of early_pfn_to_nid for PPC64.  This is used by
memory models to determine the node from which to take allocations before the
memory allocators are fully initialised.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:05 -07:00
Andy Whitcroft
641c767389 [PATCH] sparsemem swiss cheese numa layouts
The part of the sparsemem patch which modifies memmap_init_zone() has recently
become a problem.  It changes behavior so that there is a call to
pfn_to_page() for each individual page inside of a node's range:
node_start_pfn through node_end_pfn.  It used to simply do this once, at the
beginning of the node, but having sparsemem's non-contiguous mem_map[]s inside
of a node made it necessary to change.

Mike Kravetz recently wrote a patch which made the NUMA code accept some new
kinds of layouts.  The system's memory was laid out like this, with node 0's
memory in two pieces: one before and one after node 1's memory:

	Node 0: +++++     +++++
	Node 1:      +++++

Previous behavior before Mike's patch was to assign nodes like this:

	Node 0: 00000     XXXXX
	Node 1:      11111

Where the 'X' areas were simply thrown away.  The new behavior was to make the
pg_data_t span node 0 across all of its areas, including areas that are really
node 1's: Node 0: 000000000000000 Node 1: 11111

This wastes a little bit of mem_map space, but ends up being OK, and more
fully utilizes the system's memory.  memmap_init_zone() initializes all of the
"struct page"s for node 0, even for the "hole", but those never get used,
because there is no pfn_to_page() that resolves to those pages.  However, only
calling pfn_to_page() once, memmap_init_zone() always uses the pages that were
allocated for node0->node_mem_map because:

	struct page *start = pfn_to_page(start_pfn);
	// effectively start = &node->node_mem_map[0]
	for (page = start; page < (start + size); page++) {
		init_page_here();...
		page++;
	}

Slow, and wasteful, but generally harmless.

But, modify that to call pfn_to_page() for each loop iteration (like sparsemem
does):

	for (pfn = start_pfn; pfn < < (start_pfn + size); pfn++++) {
		page = pfn_to_page(pfn);
	}

And you end up trying to initialize node 1's pages too early, along with bogus
data from node 0.  This patch checks for those weird layouts and declines to
touch the pages, making the more frequent pfn_to_page() calls OK to do.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:05 -07:00
Mike Kravetz
368a0a3afa [PATCH] ppc64: Kconfig memory models
This patch changes some of the default behavior in the ppc64 Kconfig file
that was recently changed/added to 2.6.12-rc2-mm1 by Dave Hansen in
preparation for SPARSEMEM.  Patch allows the display of both FLAT and
DISCONTIG models on pseries.  As before, default is DISCONTIG for SMP and
PSERIES and FLAT for others.

Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:04 -07:00
Dave Hansen
0e19243e9a [PATCH] update all defconfigs for ARCH_DISCONTIGMEM_ENABLE
This will at least suppress one prompt that users would have received the
first time they compile with the new DISCONTIG arch option.  They'll still
get the "Memory Model" prompt, but 99% of them will have the default work
there.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:02 -07:00
Dave Hansen
3f22ab276b [PATCH] make each arch use mm/Kconfig
For all architectures, this just means that you'll see a "Memory Model"
choice in your architecture menu.  For those that implement DISCONTIGMEM,
you may eventually want to make your ARCH_DISCONTIGMEM_ENABLE a "def_bool
y" and make your users select DISCONTIGMEM right out of the new choice
menu.  The only disadvantage might be if you have some specific things that
you need in your help option to explain something about DISCONTIGMEM.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:02 -07:00
Dave Hansen
408fde81c1 [PATCH] remove non-DISCONTIG use of pgdat->node_mem_map
This patch effectively eliminates direct use of pgdat->node_mem_map outside
of the DISCONTIG code.  On a flat memory system, these fields aren't
currently used, neither are they on a sparsemem system.

There was also a node_mem_map(nid) macro on many architectures.  Its use
along with the use of ->node_mem_map itself was not consistent.  It has
been removed in favor of two new, more explicit, arch-independent macros:

	pgdat_page_nr(pgdat, pagenr)
	nid_page_nr(nid, pagenr)

I called them "pgdat" and "nid" because we overload the term "node" to mean
"NUMA node", "DISCONTIG node" or "pg_data_t" in very confusing ways.  I
believe the newer names are much clearer.

These macros can be overridden in the sparsemem case with a theoretically
slower operation using node_start_pfn and pfn_to_page(), instead.  We could
make this the only behavior if people want, but I don't want to change too
much at once.  One thing at a time.

This patch removes more code than it adds.

Compile tested on alpha, alpha discontig, arm, arm-discontig, i386, i386
generic, NUMAQ, Summit, ppc64, ppc64 discontig, and x86_64.  Full list
here: http://sr71.net/patches/2.6.12/2.6.12-rc1-mhp2/configs/

Boot tested on NUMAQ, x86 SMP and ppc64 power4/5 LPARs.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin J. Bligh <mbligh@aracnet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:00 -07:00
David Gibson
d7152fe14c [PATCH] Maple powerdown patch
Currently reset and powerdown are not implemented on the Maple board,
and attempting to do so will (incorrectly return).  This implements
the proper communication with the service processor, allowing correct
reset and powerdown on the Maple board, by communicating with the
service processor.  If somehow it's unable to communicate with the
service processor it will loop forever instead.

Note that powerdown on the Maple will power down the CPUs, but not the
fans or other board components due to hardware and firmware
limitations.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Frank Rowand <frowand@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-23 17:14:39 +10:00
John Rose
dad32bbf43 [PATCH] pSeries - read irqs dynamically
For I/O DLPAR to work properly, the kernel needs to allow for dynamic
assignment of the irq field of the pci_dev structure upon dynamic bus
addition.  This patch moves the assignment of that field from
pSeries_final_fixup() to pcibios_fixup_bus(), which enables dynamic
assignment for the children of a newly added bus.

Currently, pci_devs receive their irq numbers in one of two ways.  The
irq line is either read at boot for all pci_devs, or read by the rpaphp
module at slot enable time.  The latter is no longer sufficient for
DLPAR addition of slots that don't qualify as PCI-hotplug capable.
This solution handles the cases of boot and dynamic add.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-23 17:09:54 +10:00
Mike Strosaker
8f586b2243 [PATCH] correct printing to operator panel
This patch corrects the printing of progress indicators to the op
panel on p/iSeries ppc64 systems.  Each discrete reference code should
begin with a form feed char to clear the op panel, and the first and
second lines should be separated with a CR/LF sequence.  Padding with
spaces is not necessary.

Also, capitalize the hex value printed on the first line, to be
consistent with the values printed by firmware, service processor,
etc.

It turns out that there's an ibm,form-feed property; this patch uses
it in the pSeries-specific progress routine.  This patch also checks
the number of rows and the specific width of each row (the second row
on power5 systems can actually hold 80 characters).  If the displayed
text is too wide for the physical display, it can be viewed in the ASM
menus, or by selecting option 14 on the op panel.

Signed-off-by: Mike Strosaker <strosake@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-23 16:09:41 +10:00
Arnd Bergmann
ae209cf100 [PATCH] ppc64: Add driver for BPA iommu
Implementation of software load support for the BE iommu. This is very
different from other iommu code on ppc64, since we only do a static mapping.
The mapping is currently hardcoded but should really be read from the
firmware, but they don't set up the device nodes yet. There is a single
512MB DMA window for PCI, USB and ethernet at 0x20000000 for our RAM.

The Cell processor can put the I/O page table either in memory like
the hashed page table (hardware load) or have the operating system
write the entries into memory mapped CPU registers (software load).

I use the software load mechanism because I know that all I/O page
table entries for the amount of installed physical memory fit into
the IO TLB cache. At the point when we get machines with more than
4GB of installed memory, we can either use hardware I/O page table
access like the other platforms do or dynamically update the I/O
TLB entries when a page fault occurs in the I/O subsystem.

The software load can then use the macros that I have implemented
for the static mapping in order to do the TLB cache updates.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-23 09:43:54 +10:00
Arnd Bergmann
cebf589c82 [PATCH] ppc64: Add driver for BPA interrupt controllers
Add support for the integrated interrupt controller on BPA
CPUs. There is one of those for each SMT thread.

The mapping of interrupt numbers to HW interrupt sources
is described in arch/ppc64/kernel/bpa_iic.h.

This version hardcodes the 'Spider' chip as the secondary
interrupt controller. That is not really generic for the
architecture, but at the moment it is the only secondary
PIC that exists.

A little more work will be needed on this as soon as
we have boards with multiple external interrupt controllers.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-23 09:43:43 +10:00
Arnd Bergmann
fef1c772fa [PATCH] ppc64: add BPA platform type
This adds the basic support for running on BPA machines.
So far, this is only the IBM workstation, and it will
not run on others without a little more generalization.

It should be possible to configure a kernel for any
combination of CONFIG_PPC_BPA with any of the other
multiplatform targets.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-23 09:43:37 +10:00
Utz Bacher
5f5b4e669a [PATCH] ppc64: add a minimal nvram driver
The firmware provides the location and size of the nvram
in the device tree, so it does not really contain any
hardware specific bits and could be used on other
machines as well.
 
Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-23 09:43:31 +10:00
Arnd Bergmann
6566c6f1f1 [PATCH] ppc64: pSeries_progress -> rtas_progress
The pSeries_progress function is called from some places in the rtas code,
which may also be used by non-pSeries platforms.
Though pSeries is currently the only platform type that implements
display-character, the code is actually generic enough to be part of
the rtas subsystem.

I hit a bug here because the generic rtas code tried calling ppc_md.progress,
which points to an __init function on most platforms.

We could also clear the ppc_md.progress pointer when freeing the init memory
to make it more explicit that ppc_md.progress must not be called after
bootup.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-23 09:43:28 +10:00
Arnd Bergmann
c5a3c2e52a [PATCH] ppc64: Split out generic rtas code from pSeries_pci.c.
BPA is using rtas for PCI but should not be confused by
pSeries code. This also avoids some #ifdefs. Other
platforms that want to use rtas_pci.c could create
their own platform_pci.c with platform specific fixups.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-23 09:43:23 +10:00
Arnd Bergmann
773bf9c469 [PATCH] ppc64: rename pSeries rtc functions into rtas_*
The rtc rtas functions are not pSeries specific but can
also be used by BPA and other SLOF based platforms

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-23 09:43:18 +10:00