Commit Graph

18 Commits

Author SHA1 Message Date
Larry Finger
01449c5a46 [BCM43XX]: Change radio hardware switch status printk from debug to regular
Some distros ship bcm43xx with debugging printout disabled. For those
BCM43xx devices with radio on/off switches, this makes it impossible
to know if the radio is on or off. This patch changes a pair of debug
printk's into ordinary printk's. It also changes the message that
prints when the radio is initialized to the off state as the old message
seems to confuse users.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:18 -07:00
Larry Finger
3a5c393e6f [PATCH] bcm43xx: Change initialization for 2050 radios
This patch implements the changes in the specifications for
2050radio_init that were recently posted.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:01:03 -04:00
Stefano Brivio
7265c5d10d [PATCH] bcm43xx: fix radio_set_tx_iq
Fix a duplicated leftshift in bcm43xx_radio_set_tx_iq. data_high values are
already leftshifted. Thanks to Michael Buesch for spotting this.

Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-03-27 13:16:52 -04:00
Larry Finger
be10d3860e [PATCH] bcm43xx: Fix code for confusion between PHY revision and PHY version
There are several places where the PHY version and revision were interchanged.
These are changed in the specifications on 2/13/07 and now use "analog" instead
instead of "version" to help reduce confusion.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-03-27 13:16:52 -04:00
Larry Finger
21665a69e6 [PATCH] bcm43xx: MANUALWLAN fixes
During testing of bcm43xx interference mitigation, two problems were
discovered:

(1) When the MANUALWLAN mode was set, routines _stack_save and _stack_restore
    generated assertions that were traced to saving ILT registers with addresses
    > 0xFFF. This problem was fixed by adding one bit to the field used for
    the offset, and subtracting one bit from the space used for the id.
(2) In MANUALWLAN mode, the IRQ XMIT errors are generated. The cause of these
    errors has not yet been located. Any suggestions on debugging this problem
    would be greatly appreciated.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-03-16 15:32:46 -04:00
John W. Linville
b312362be6 Merge branch 'upstream' into upstream-jgarzik
Conflicts:

	net/ieee80211/softmac/ieee80211softmac_module.c
	net/ieee80211/softmac/ieee80211softmac_wx.c
2007-02-17 18:26:09 -05:00
Larry Finger
740ac4fb08 [PATCH] bcm43xx: Fix for 4311 and 02/07/07 specification changes
The specifications for the bcm43xx driver have been modified. This
patch incorporates these changes in the code, which results in the
BCM4311 and BCM4312 working. The name of one of the PHY parameters,
previously known as "version", has been changed to "analog", short for
"analog core version" .

Signed-off-by: Larry Finger<Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-14 15:45:05 -05:00
Larry Finger
0191738286 [PATCH] bcm43xx: Interrogate hardware-enable switch and update LEDs
The current bcm43xx driver ignores any wireless-enable switches on mini-PCI
and mini-PCI-E cards. This patch implements a new routine to interrogate the
radio hardware enabled bit in the interface, logs the initial state and any
changes in the switch (if debugging enabled), activates the LED to show the
state, and changes the periodic work handler to provide 1 second response
to switch changes and to account for changes in the periodic work specs.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05 16:58:42 -05:00
Larry Finger
fc8fd3400b [PATCH] Convert bcm43xx-softmac to use the ieee80211_is_valid_channel routine
The current version of bcm43xx-softmac uses local routines to check
if a channel is valid. As noted in the comments, these routines do
not take any regulatory information into account. This patch converts
the code to use the equivalent routine in ieee80211, which is being
converted to know about regulatory information.

Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05 13:42:57 -04:00
Michael Buesch
cf017e1b6f [PATCH] bcm43xx: fix nrssi_threshold calculation.
patch by doctorzoidberg.

Signed-off-by: Michael Buesch <mbuesch@freenet.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27 11:19:43 -05:00
Michael Buesch
e382c234cb [PATCH] bcm43xx: sync interference mitigation code to the specs.
This also includes a rewritten valuesave-stack.

Signed-off-by: Michael Buesch <mbuesch@freenet.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27 11:19:43 -05:00
Michael Buesch
6ecb26904c [PATCH] bcm43xx: set default attenuation values.
Signed-off-by: Michael Buesch <mbuesch@freenet.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27 11:19:42 -05:00
Michael Buesch
5808bbbdf8 [PATCH] bcm43xx: properly mask txctl1 before writing it to hardware.
This should not make a difference, but be careful to not trash the register.

Signed-off-by: Michael Buesch <mbuesch@freenet.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27 11:19:39 -05:00
Michael Buesch
e9357c056c [PATCH] bcm43xx: reduce the size of bcm43xx_private by removing unneeded members.
Signed-off-by: Michael Buesch <mbuesch@freenet.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27 11:19:37 -05:00
Michael Buesch
73733847be [PATCH] bcm43xx: fix some stuff, add a few missing mmiowb(), remove dead code.
This may workaround the XMIT ERRORs some people are getting.

Signed-off-by: Michael Buesch <mbuesch@freenet.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27 11:19:36 -05:00
Danny van Dyk
67093a65c0 [PATCH] Sync bcm43xx_phy_initb6() with specs
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27 11:18:29 -05:00
Michael Buesch
ea72ab229f [PATCH] bcm43xx: sync with svn.berlios.de
Signed-off-by: Michael Buesch <mbuesch@freenet.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27 11:18:24 -05:00
John W. Linville
f222313a61 [PATCH] wireless: import bcm43xx sources
Import the bcm43xx driver from the upstream sources here:

ftp://ftp.berlios.de/pub/bcm43xx/snapshots/bcm43xx/bcm43xx-20060123.tar.bz2

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27 11:18:23 -05:00