* 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: (30 commits)
BKL: remove BKL from freevxfs
BKL: remove BKL from qnx4
autofs4: Only declare function when CONFIG_COMPAT is defined
autofs: Only declare function when CONFIG_COMPAT is defined
ncpfs: Lock socket in ncpfs while setting its callbacks
fs/locks.c: prepare for BKL removal
BKL: Remove BKL from ncpfs
BKL: Remove BKL from OCFS2
BKL: Remove BKL from squashfs
BKL: Remove BKL from jffs2
BKL: Remove BKL from ecryptfs
BKL: Remove BKL from afs
BKL: Remove BKL from USB gadgetfs
BKL: Remove BKL from autofs4
BKL: Remove BKL from isofs
BKL: Remove BKL from fat
BKL: Remove BKL from ext2 filesystem
BKL: Remove BKL from do_new_mount()
BKL: Remove BKL from cgroup
BKL: Remove BKL from NTFS
...
Currently, the default behavior of O_DIRECT writes was allowing
concurrent writing among nodes to the same file, with no cluster
coherency guaranteed (no EX lock held). This can leave stale data in
the cache for buffered reads on other nodes.
The new mount option introduce a chance to choose two different
behaviors for O_DIRECT writes:
* coherency=full, as the default value, will disallow
concurrent O_DIRECT writes by taking
EX locks.
* coherency=buffered, allow concurrent O_DIRECT writes
without EX lock among nodes, which
gains high performance at risk of
getting stale data on other nodes.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Functions such as ocfs2_recovery_init() make use of osb->max_slots.
Initialize osb->max_slots early so the functions may use the correct
value.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Adds support for heartbeat=global mount option. It ensures that the heartbeat
mode passed matches the one enabled on disk.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
OCFS2_FEATURE_INCOMPAT_CLUSTERINFO allows us to use sb->s_cluster_info for
both userspace and o2cb cluster stacks. It also allows us to extend cluster
info to include stack flags.
This patch also adds stackflags to sb->s_clusterinfo. It also introduces a
clusterinfo flag OCFS2_CLUSTER_O2CB_GLOBAL_HEARTBEAT to denote the enabled
global heartbeat mode.
This incompat flag can be set/cleared using tunefs.ocfs2 --fs-features. The
clusterinfo flag is set/cleared using tunefs.ocfs2 --update-cluster-stack.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
The BKL in ocfs2/dlmfs is used in put_super, fill_super and remount_fs
that are all three protected by the superblocks s_umount rw_semaphore.
The use in ocfs2_control_open is evidently unrelated and the function
is protected by ocfs2_control_lock.
Therefore it is safe to remove the BKL entirely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
This patch is a preparation necessary to remove the BKL from do_new_mount().
It explicitly adds calls to lock_kernel()/unlock_kernel() around
get_sb/fill_super operations for filesystems that still uses the BKL.
I've read through all the code formerly covered by the BKL inside
do_kern_mount() and have satisfied myself that it doesn't need the BKL
any more.
do_kern_mount() is already called without the BKL when mounting the rootfs
and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called
from various places without BKL: simple_pin_fs(), nfs_do_clone_mount()
through nfs_follow_mountpoint(), afs_mntpt_do_automount() through
afs_mntpt_follow_link(). Both later functions are actually the filesystems
follow_link inode operation. vfs_kern_mount() is calling the specified
get_sb function and lets the filesystem do its job by calling the given
fill_super function.
Therefore I think it is safe to push down the BKL from the VFS to the
low-level filesystems get_sb/fill_super operation.
[arnd: do not add the BKL to those file systems that already
don't use it elsewhere]
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Christoph Hellwig <hch@infradead.org>
Durring orphan scan, if we are slot 0, and we are replaying
orphan_dir:0001, the general process is that for every file
in this dir:
1. we will iget orphan_dir:0001, since there is no inode for it.
we will have to create an inode and read it from the disk.
2. do the normal work, such as delete_inode and remove it from
the dir if it is allowed.
3. call iput orphan_dir:0001 when we are done. In this case,
since we have no dcache for this inode, i_count will
reach 0, and VFS will have to call clear_inode and in
ocfs2_clear_inode we will checkpoint the inode which will let
ocfs2_cmt and journald begin to work.
4. We loop back to 1 for the next file.
So you see, actually for every deleted file, we have to read the
orphan dir from the disk and checkpoint the journal. It is very
time consuming and cause a lot of journal checkpoint I/O.
A better solution is that we can have another reference for these
inodes in ocfs2_super. So if there is no other race among
nodes(which will let dlmglue to checkpoint the inode), for step 3,
clear_inode won't be called and for step 1, we may only need to
read the inode for the 1st time. This is a big win for us.
So this patch will try to cache system inodes of other slots so
that we will have one more reference for these inodes and avoid
the extra inode read and journal checkpoint.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The OCFS2 developers have already done all of the hard work to allow
volumes larger than 16 TiB. But there is still a "sanity check" in
fs/ocfs2/super.c that prevents the mounting of such volumes, even when
the cluster size and journal options would allow it.
This patch replaces that sanity check with a more sophisticated one to
mount a huge volume provided that (a) it is addressable by the raw
word/address size of the system (borrowing a test from ext4); (b) the
volume is using JBD2; and (c) the JBD2_FEATURE_INCOMPAT_64BIT flag is
set on the journal.
I factored out the sanity check into its own function. I also moved it
from ocfs2_initialize_super() down to ocfs2_check_volume(); any earlier,
and the journal will not have been initialized yet.
This patch is one of a pair, and it depends on the other ("JBD2: Allow
feature checks before journal recovery").
I have tested this patch on small volumes, huge volumes, and huge
volumes without 64-bit block support in the journal. All of them appear
to work or to fail gracefully, as appropriate.
Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
Follow the dquot_* style used elsewhere in dquot.c.
[Jan Kara: Fixed up missing conversion of ext2]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Remount handling has fully moved into the filesystem, so all this is
superflous now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Instead of having wrappers in the VFS namespace export the dquot_suspend
and dquot_resume helpers directly. Also rename vfs_quota_disable to
dquot_disable while we're at it.
[Jan Kara: Moved dquot_suspend to quotaops.h and made it inline]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
We also have to cancel quota syncing thread on remount read only because
at that moment quota is being turned off. Otherwise quota syncing thread
will try to access already freed quota structures.
Signed-off-by: Jan Kara <jack@suse.cz>
We cannot cancel delayed work from ocfs2_local_free_info because that is called
with dqonoff_mutex held and the work it cancels requires dqonoff_mutex to
finish. Cancel the work before acquiring dqonoff_mutex.
Acked-by: Joel Becker <Joel.Becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
ocfs2 sometimes needs to block signals around dlm operations, but it
currently does it with sigprocmask(). Even worse, it's checking the
error code of sigprocmask(). The in-kernel sigprocmask() can only error
if you get the SIG_* argument wrong. We don't.
Wrap the sigprocmask() calls with ocfs2_[un]block_signals(). These
functions are void, but they will BUG() if somehow sigprocmask() returns
an error.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
OCFS2 has never really supported intr. This patch acknowledges this reality
and makes nointr the default mount option. In a later patch, we intend to
support intr.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The default behavior for directory reservations stays the same, but we add a
mount option so people can tweak the size of directory reservations
according to their workloads.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
I have observed that the current size of 8M gives us pretty poor
fragmentation on multi-threaded workloads which do lots of writes.
Generally, I can increase the size of local alloc windows and observe a
marked decrease in fragmentation, even up and beyond window sizes of 512
megabytes. This makes sense for a couple reasons - larger local alloc means
more room for reservation windows. On multi-node workloads the larger local
alloc helps as well because we don't have to do window slides as often.
Also, I removed the OCFS2_DEFAULT_LOCAL_ALLOC_SIZE constant as it is no
longer used and the comment above it was out of date.
To test fragmentation, I used a workload which launched 4 threads that did
4k writes into a series of about 140 alternating files.
With resv_level=2, and a 4k/4k file system I observed the following average
fragmentation for various localalloc= parameters:
localalloc= avg. fragmentation
8 48
32 16
64 10
120 7
On larger cluster sizes, the difference is more dramatic.
The new default size top out at 256M, which we'll only get for cluster
sizes of 32K and above.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch pulls the local alloc sizing code into localalloc.c and provides
a callout to it from ocfs2_fill_super(). Behavior is essentially unchanged
except that I correctly calculate the maximum local alloc size. The old code
in ocfs2_parse_options() calculated the max size as:
ocfs2_local_alloc_size(sb) * 8
which is correct, in bits. Unfortunately though the option passed in is in
megabytes. Ultimately, this bug made no real difference - the shrink code
would catch a too-large size and bring it down to something reasonable.
Still, it's less than efficient as-is.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch improves Ocfs2 allocation policy by allowing an inode to
reserve a portion of the local alloc bitmap for itself. The reserved
portion (allocation window) is advisory in that other allocation
windows might steal it if the local alloc bitmap becomes
full. Otherwise, the reservations are honored and guaranteed to be
free. When the local alloc window is moved to a different portion of
the bitmap, existing reservations are discarded.
Reservation windows are represented internally by a red-black
tree. Within that tree, each node represents the reservation window of
one inode. An LRU of active reservations is also maintained. When new
data is written, we allocate it from the inodes window. When all bits
in a window are exhausted, we allocate a new one as close to the
previous one as possible. Should we not find free space, an existing
reservation is pulled off the LRU and cannibalized.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_group_bitmap_size has to handle the case when the
volume don't have discontiguous block group support. So
pass the feature_incompat in and check it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Defines the OCFS2_FEATURE_INCOMPAT_DISCONTIG_BG feature bit and modifies
struct ocfs2_group_desc for the feature.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
This patch add extent block (metadata) stealing mechanism for
extent allocation. This mechanism is same as the inode stealing.
if no room in slot specific extent_alloc, we will try to
allocate extent block from the next slot.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c
ocfs2/trivial: Use proper mask for 2 places in hearbeat.c
Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink.
Ocfs2: Should ocfs2 support fiemap for S_IFDIR inode?
ocfs2: Use FIEMAP_EXTENT_SHARED
fiemap: Add new extent flag FIEMAP_EXTENT_SHARED
ocfs2: replace u8 by __u8 in ocfs2_fs.h
ocfs2: explicit declare uninitialized var in user_cluster_connect()
ocfs2-devel: remove redundant OCFS2_MOUNT_POSIX_ACL check in ocfs2_get_acl_nolock()
ocfs2: return -EAGAIN instead of EAGAIN in dlm
ocfs2/cluster: Make fence method configurable - v2
ocfs2: Set MS_POSIXACL on remount
ocfs2: Make acl use the default
ocfs2: Always include ACL support
Currently the f_fsid of struct kstatfs returned from ocfs2_statfs() is
undefined (vfs layer fills in 0 as default). Since in some conditions,
f_fsid value might be used in a (f_fsid, ino) pair to uniquely identify
a file, ocfs2 should return a unique defined f_fsid value from
ocfs2_statfs().
Because uuid_str is the same on big or litlle endian machine, it's
endian consistent to use osb->uuid_str to generate f_fsid value.
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Sunil Mushran <sunil.mushran@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We have to set MS_POSIXACL on remount as well. Otherwise VFS
would not know we started supporting ACLs after remount and
thus ACLs would not work.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Change acl mount options handling to match the one of XFS and BTRFS and
hopefully it is also easier to use now. When admin does not specify any
acl mount option, acls are enabled if and only if the filesystem has
xattr feature enabled. If admin specifies 'acl' mount option, we fail
the mount if the filesystem does not have xattr feature and thus acls
cannot be enabled.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
To become consistent with filesystems such as XFS or BTRFS, make posix
ACLs always available. This also reduces possibility of
misconfiguration on admin's side.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In case of non-modular kernels the root filesystem is mounted by trying
several filesystems. If ocfs2 was tried before the actual filesystem
type, the mount would fail because ocfs2_sb_probe() returns -EAGAIN
instead of -EINVAL. ocfs2 will now return -EINVAL properly.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Reported-by: Laszlo Attila Toth <panther@balabit.hu>
* remove asm/atomic.h inclusion from linux/utsname.h --
not needed after kref conversion
* remove linux/utsname.h inclusion from files which do not need it
NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (85 commits)
ocfs2: Use buffer IO if we are appending a file.
ocfs2: add spinlock protection when dealing with lockres->purge.
dlmglue.c: add missed mlog lines
ocfs2: __ocfs2_abort() should not enable panic for local mounts
ocfs2: Add ioctl for reflink.
ocfs2: Enable refcount tree support.
ocfs2: Implement ocfs2_reflink.
ocfs2: Add preserve to reflink.
ocfs2: Create reflinked file in orphan dir.
ocfs2: Use proper parameter for some inode operation.
ocfs2: Make transaction extend more efficient.
ocfs2: Don't merge in 1st refcount ops of reflink.
ocfs2: Modify removing xattr process for refcount.
ocfs2: Add reflink support for xattr.
ocfs2: Create an xattr indexed block if needed.
ocfs2: Call refcount tree remove process properly.
ocfs2: Attach xattr clusters to refcount tree.
ocfs2: Abstract ocfs2 xattr tree extend rec iteration process.
ocfs2: Abstract the creation of xattr block.
ocfs2: Remove inode from ocfs2_xattr_bucket_get_name_value.
...
In a clustered setup, we have to panic the box on journal abort. This is
because we don't have the facility to go hard readonly. With hard ro, another
node would detect node failure and initiate recovery.
Having said that, we shouldn't force panic if the volume is mounted locally.
This patch defers the handling to the mount option, errors.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Implement locking around struct ocfs2_refcount_tree. This protects
all read/write operations on refcount trees. ocfs2_refcount_tree
has its own lock and its own caching_info, protecting buffers among
multiple nodes.
User must call ocfs2_lock_refcount_tree before his operation on
the tree and unlock it after that.
ocfs2_refcount_trees are referenced by the block number of the
refcount tree root block, So we create an rb-tree on the ocfs2_super
to look them up.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Similar ip_last_trans, ip_created_trans tracks the creation of a journal
managed inode. This specifically tracks what transaction created the
inode. This is so the code can know if the inode has ever been written
to disk.
This behavior is desirable for any journal managed object. We move it
to struct ocfs2_caching_info as ci_created_trans so that any object
using ocfs2_caching_info can rely on this behavior.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We have the read side of metadata caching isolated to struct
ocfs2_caching_info, now we need the write side. This means the journal
functions. The journal only does a couple of things with struct inode.
This change moves the ip_last_trans field onto struct
ocfs2_caching_info as ci_last_trans. This field tells the journal
whether a pending journal flush is required.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We are really passing the inode into the ocfs2_read/write_blocks()
functions to get at the metadata cache. This commit passes the cache
directly into the metadata block functions, divorcing them from the
inode.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We don't really want to cart around too many new fields on the
ocfs2_caching_info structure. So let's wrap all our access of the
parent object in a set of operations. One pointer on caching_info, and
more flexibility to boot.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We want to use the ocfs2_caching_info structure in places that are not
inodes. To do that, it can no longer rely on referencing the inode
directly.
This patch moves the flags to ocfs2_caching_info->ci_flags, stores
pointers to the parent's locks on the ocfs2_caching_info, and renames
the constants and flags to reflect its independant state.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
If we fail to mount the filesystem, we have to be careful not to dereference
uninitialized structures in ocfs2_kill_sb.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
