Commit Graph

806 Commits

Author SHA1 Message Date
Sam Ravnborg
b2b77b2335 acpi: fix section mismatch warning in asus + toshiba
Fix following section mismatch warnings in acpi

WARNING: drivers/acpi/asus_acpi.o(.init.text+0xb7): Section mismatch: reference to .exit.text: (after 'init_module')
WARNING: o-i386/drivers/acpi/toshiba_acpi.o(.init.text+0x13a): Section mismatch: reference to .exit.text: (after 'init_module')

The exit function is used in the init function during an error codition.
As __exit may be discarded during link-time / run-time this is no good.
Do not mark the exit function __exit.

Note: This warning is only seen by my local copy of modpost
      but the change will soon hit upstream.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01 08:18:30 -07:00
Aaron Durbin
f363d16fbb acpi: fix potential call to a freed memory section.
Strip __cpuinit[data] from Node <-> PXM routines and supporting data
structures.  Also make pxm_to_node_map and node_to_pxm_map local to the
numa acpi module.

This fixes a bug triggered by the following conditions:
- boot on a machine with a SLIT table defined
- kernel is configured w/ CONFIG_HOTPLUG_CPU=n
- cat /sys/devices/system/node/node*/distance
This will cause an oops by calling into a freed memory section.

In particular, on x86_64, __node_distance calls node_to_pxm().

Signed-off-by: Aaron Durbin <adurbin@google.com>
Cc: Len Brown <lenb@kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17 05:23:04 -07:00
Len Brown
f685648e7d Pull misc-for-upstream into release branch 2007-05-10 04:06:12 -04:00
Lennart Poettering
00eb43a189 acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands
The ACPI EC that is used in MSI laptops knows some non-standard
commands for changing the screen brighntess and a few other things,
which are used by the msi-laptop.c driver. Unfortunately for these
commands no GPE events for IBF and OBF are triggered. Since nowadays
the EC code uses the ec_intr=1 mode by default, this causes these
operations to timeout, although they don't fail. In result, all
operations that you can do with the msi-laptop.c driver take more or
less 1s to complete, which is awfully slow.

In one of the more recent kernels (2.6.20?) the EC subsystem has been
revamped. With that change the EC timeout has been increased. before
that increase the MSI EC accesses were slow -- but not *that* slow,
hence I took notice of this limitation of the MSI EC hardware only very
recently.

The standard EC operations on the MSI EC as defined in the ACPI spec
support GPE events properly.

The following patch adds a new argument "force_poll" to the
ec_transaction() function (and friends). If set to 1, the function
will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the
current behaviour is used. The msi-laptop driver is modified to make
use of this new flag, so that OBF/IBF is polled for the special MSI EC
transactions -- but only for them.

Signed-off-by: Lennart Poettering <mzxreary@0pointer.de>
Acked-by: Alexey Starikovskiy <aystarik@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-10 03:52:22 -04:00
Len Brown
71b43ca46f Pull acpica into release branch 2007-05-10 02:49:34 -04:00
Len Brown
3dd6786f55 Pull bugzilla-8385 into release branch 2007-05-10 02:49:21 -04:00
Len Brown
f697b67762 Pull thermal into release branch 2007-05-10 02:49:01 -04:00
Len Brown
fd3509436f ACPICA: Lindent
Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09 23:34:35 -04:00
Alexey Starikovskiy
88db5e1489 ACPI: created a dedicated workqueue for notify() execution
HP nx6125/nx6325/... machines have a _GPE handler with an infinite
loop sending Notify() events to different ACPI subsystems.

Notify handler in ACPI driver is a C-routine, which may call ACPI
interpreter again to get access to some ACPI variables
(acpi_evaluate_xxx).
On these HP machines such an evaluation changes state of some variable
and lets the loop above break.

In the current ACPI implementation Notify requests are being deferred
to the same kacpid workqueue on which the above GPE handler with
infinite loop is executing. Thus we have a deadlock -- loop will
continue to spin, sending notify events, and at the same time
preventing these notify events from being run on a workqueue. All
notify events are deferred, thus we see increase in memory consumption
noticed by author of the thread. Also as GPE handling is bloked,
machines overheat. Eventually by external poll of the same
acpi_evaluate, kacpid is released and all the queued notify events are
free to run, thus 100% cpu utilization by kacpid for several seconds
or more.

To prevent all these horrors it's needed to not put notify events to
kacpid workqueue by either executing them immediately or putting them
on some other thread. It's dangerous to execute notify events in
place, as it will put several ACPI interpreter stacks on top of each
other (at least 4 in case of nx6125), thus causing kernel  stack
overflow.

First attempt to create a new thread was done by Peter Wainwright
He created a bunch of threads, which were stealing work from a kacpid
workqueue.
This patch appeared in 2.6.15 kernel shipped with Ubuntu 6.06 LTS.

Second attempt was done by me, I created a new thread for each Notify
event. This worked OK on HP nx machines, but broke Linus' Compaq
n620c, by producing threads with a speed what they stopped the machine
completely. Thus this patch was reverted from 18-rc2 as I remember.
I re-made the patch to create second workqueue just for notify events,
thus hopping it will not break Linus' machine. Patch was tested on the
same HP nx machines in #5534 and #7122, but I did not received reply
from Linus on a test patch sent to him.
Patch went to 19-rc and was rejected with much fanfare again.
There was 4th patch, which inserted schedule_timeout(1) into deferred
execution of kacpid, if we had any notify requests pending, but Linus
decided that it was too complex (involved either changes to workqueue
to see if it's empty or atomic inc/dec).
Now you see last variant which adds yield() to every GPE execution.

http://bugzilla.kernel.org/show_bug.cgi?id=5534
http://bugzilla.kernel.org/show_bug.cgi?id=8385

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09 23:31:03 -04:00
Len Brown
262a7a28de Revert "ACPICA: fix AML mutex re-entrancy"
This reverts commit c0d127b569.

These changes to AML locking were made to allow
Notify handlers to be called on the stack
and not deadlock.  However, that scheme turns
out to be flawed and was reverted by the previous commit,
so this commit restores the locking to it previous design.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09 23:01:59 -04:00
Len Brown
40d07080e5 Revert "Execute AML Notify() requests on stack."
This reverts commit 5f7748cf91.

While that change fixed the HP
http://bugzilla.kernel.org/show_bug.cgi?id=5534

it broke the ACER:
http://bugzilla.kernel.org/show_bug.cgi?id=8385
which as AML that caused Linux go recursive
and stack fault.

So this commit by itself will restore the ACER
and again break the HP, which we'll fix another way.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09 22:59:38 -04:00
Len Brown
4d2acd9ea5 Revert "ACPICA: revert "acpi_serialize" changes"
This reverts commit a8f4af6dc6.
Thus restoring ACPICA's new acpi_serialize code.

This commit by itself may cause a regression, but
it is reverted in this order so that subsequent
reverts reverts under this one can be made
without conflict.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09 22:56:38 -04:00
Rafael J. Wysocki
a3d25c275d PM: Separate hibernation code from suspend code
[ With Johannes Berg <johannes@sipsolutions.net> ]

Separate the hibernation (aka suspend to disk code) from the other suspend
code.  In particular:

 * Remove the definitions related to hibernation from include/linux/pm.h
 * Introduce struct hibernation_ops and a new hibernate() function to hibernate
   the system, defined in include/linux/suspend.h
 * Separate suspend code in kernel/power/main.c from hibernation-related code
   in kernel/power/disk.c and kernel/power/user.c (with the help of
   hibernation_ops)
 * Switch ACPI (the only user of pm_ops.pm_disk_mode) to hibernation_ops

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:48 -07:00
Yasunori Goto
7e81ab9d3d Fix unnecesary meminit
This is to fix unnecessary __meminit definition.  These are exported for
kernel modules.

I compiled on ia64/x86-64 with memory hotplug on/off.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 20:41:14 -07:00
David Brownell
19bfe37caa workaround rtc-related acpi table bugs
This works around a bug seen in some RTC-related ACPI table entries, and
tweaks related diagnostics to follow the ACPI convention.

The bug prevents misleading boot-time messages: platforms affected by this
bug wrongly report they can support alarms up to one year in the future,
when in fact the longest alarm is just 24 hours.  That will surprise anyone
trying to use those extended alarms.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:18 -07:00
David Brownell
f5f72b46c3 ACPI wakeup hooks for rtc-cmos
Remove /proc/acpi/alarm file when the rtc-cmos "wakealarm" file is available.
Instead, provide hooks that rtc-cmos will use.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:18 -07:00
David Brownell
55955aad7c PNPACPI sets pnpdev->dev.archdata
Teach PNPACPI how to hook up its devices to their ACPI nodes, so that
pnpdev->dev.archdata points to the parallel acpi device node.  Previously
this only worked for PCI, leaving a notable hole.

Export "acpi_bus_type" so this can work.

Remove some extraneous whitespace.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:08 -07:00
Randy Dunlap
e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Yasunori Goto
a3142c8e1d Fix section mismatch of memory hotplug related code.
This is to fix many section mismatches of code related to memory hotplug.
I checked compile with memory hotplug on/off on ia64 and x86-64 box.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:14:57 -07:00
Johannes Berg
ab3bfca7ab remove software_suspend()
Remove software_suspend() and all its users since
pm_suspend(PM_SUSPEND_DISK) should be equivalent and there's no point in
having two interfaces for the same thing.

The patch also changes the valid_state function to return 0 (false) for
PM_SUSPEND_DISK when SOFTWARE_SUSPEND is not configured instead of
accepting it and having the whole thing fail later.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:59 -07:00
Linus Torvalds
ea62ccd00f Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (231 commits)
  [PATCH] i386: Don't delete cpu_devs data to identify different x86 types in late_initcall
  [PATCH] i386: type may be unused
  [PATCH] i386: Some additional chipset register values validation.
  [PATCH] i386: Add missing !X86_PAE dependincy to the 2G/2G split.
  [PATCH] x86-64: Don't exclude asm-offsets.c in Documentation/dontdiff
  [PATCH] i386: avoid redundant preempt_disable in __unlazy_fpu
  [PATCH] i386: white space fixes in i387.h
  [PATCH] i386: Drop noisy e820 debugging printks
  [PATCH] x86-64: Fix allnoconfig error in genapic_flat.c
  [PATCH] x86-64: Shut up warnings for vfat compat ioctls on other file systems
  [PATCH] x86-64: Share identical video.S between i386 and x86-64
  [PATCH] x86-64: Remove CONFIG_REORDER
  [PATCH] x86-64: Print type and size correctly for unknown compat ioctls
  [PATCH] i386: Remove copy_*_user BUG_ONs for (size < 0)
  [PATCH] i386: Little cleanups in smpboot.c
  [PATCH] x86-64: Don't enable NUMA for a single node in K8 NUMA scanning
  [PATCH] x86: Use RDTSCP for synchronous get_cycles if possible
  [PATCH] i386: Add X86_FEATURE_RDTSCP
  [PATCH] i386: Implement X86_FEATURE_SYNC_RDTSC on i386
  [PATCH] i386: Implement alternative_io for i386
  ...

Fix up trivial conflict in include/linux/highmem.h manually.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-05 14:55:20 -07:00
Linus Torvalds
ded1504dfa Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Report the number of processors in PowerNow-k8 correctly
  [CPUFREQ] do not declare undefined functions
  [CPUFREQ] cleanup kconfig options
  [CPUFREQ] Longhaul - Revert Longhaul ver. 2
  [CPUFREQ] Remove deprecated /proc/acpi/processor/performance write support
  [CPUFREQ] Fix limited cpufreq when booted on battery
  Fix preemption warnings in speedstep-centrino.c
  [CPUFREQ] Longhaul - Correct PCI code
  [CPUFREQ] p4-clockmod: switch to rdmsr_on_cpu/wrmsr_on_cpu
2007-05-04 17:38:48 -07:00
john stultz
5a90cf205c [PATCH] x86: Log reason why TSC was marked unstable
Change mark_tsc_unstable() so it takes a string argument, which holds the
reason the TSC was marked unstable.

This is then displayed the first time mark_tsc_unstable is called.

This should help us better debug why the TSC was marked unstable on certain
systems and allow us to make sure we're not being overly paranoid when
throwing out this troublesome clocksource.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:08 +02:00
Len Brown
eaca2d3f6c ACPI: delete un-reliable concept of cooling mode
The scheme where the thermal driver displayed the
cooling mode /proc/acpi/thermal_zone/*/cooling_mode
was flawed in two ways.

First, the success of _SCP doesn't actually mean
that the BIOS moved any trip points.
On many BIOS, _SCP is present, but does nothing.
So displaying what _SCP executed actually
was wrong more times than it was right.

Second, examining the relative position of the
trip points when the thermal_zone is added
is insufficient -- as the BIOS reserves the right
to change the trip points at run-time.

The only reliable way for the user to determine if
the thermal zone is in active, passive, or critical
mode is to examine the relative position of the trip points.
The user can do this without the kernel doing it
for them by looking in /proc/acpi/thermal_zone/*/trip_points

New contents for /proc/acpi/thermal_zone/*/cooling_mode:

If _SCP available:
"0 - Active; 1 - Passive\n"

If _SCP unavailable:
"<setting not supported>\n"

Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-30 23:27:43 -04:00
Len Brown
11ccc0f249 ACPI: thermal trip points are read-only
/proc/acpi/thermal_zone/*/trip_points displays
what the kernel reads from the BIOS via ACPI.

If you echo a string of ':' deliminted numbers to this file
then it will change what it displays.

But it shouldn't, since the kernel has no way to communicate
these changes to ACPI thermal zones.  ACPI thermal zone
trip points are read-only.

The kernel does have the opportunity to ask the BIOS to change
the trip points with _SCP - Set Cooling Policy.

Request Active Cooling Mode:
# echo 0 > /proc/acpi/thermal_zone/*/cooling_policy

Request Passive Cooling Mode:
# echo 1 > /proc/acpi/thermal_zone/*/cooling_policy

However, in practice it is quite rare for the BIOS
to support the optional _SCP, and it is even more rare
for the BIOS to export an _SCP that actually changes
the trip points.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-30 22:36:01 -04:00
Johannes Berg
e8c9c50269 power management: implement pm_ops.valid for everybody
Almost all users of pm_ops only support mem sleep, don't check in .valid and
don't reject any others in .prepare so users can be confused if they check
/sys/power/state, especially when new states are added (these would then
result in s-t-r although they're supposed to be something different).

This patch implements a generic pm_valid_only_mem function that is then
exported for users and puts it to use in almost all existing pm_ops.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: linux-pm@lists.linux-foundation.org
Cc: Len Brown <lenb@kernel.org>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-30 16:40:40 -07:00
Len Brown
aac60c1113 Pull bugzilla-8346 into release branch 2007-04-28 23:19:25 -04:00
Len Brown
12a5a71212 Pull sbs into release branch 2007-04-28 23:16:59 -04:00
Len Brown
14d2178588 Pull dock into release branch 2007-04-28 23:13:03 -04:00
Len Brown
03feb05246 Pull ec into release branch 2007-04-28 23:12:56 -04:00
Len Brown
fb16596997 Pull misc-for-upstream into release branch 2007-04-28 23:12:03 -04:00
Len Brown
f188291aec Pull thinkpad into release branch
Conflicts:

	drivers/misc/Kconfig

Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 23:11:19 -04:00
Bob Moore
79fff27002 ACPICA: clear fields reserved before FADT r3
Linux-2.6.21 stopped booting on a P4/HT because Linux
wrote the FADT.CST_CNT value to the SMI_CMD.
Apparently this stumbled over some SMM instability,
such as confusing SMM when invoking it from cpu1.

Linux did this because even though the r2 FADT reserves
the CST_CNT field, this BIOS set that field and Linux
used it.

Turns out that up through 2.6.20 we explicitly cleared
cst_control for r2 FADTs.  So here we go back to doing that,
plus also clear some additional fields that are reserved
until FADT r3.

http://bugzilla.kernel.org/show_bug.cgi?id=8346

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28 20:55:06 -04:00
Thomas Renninger
632786ce9f [CPUFREQ] Remove deprecated /proc/acpi/processor/performance write support
Remove deprecated /proc/acpi/processor/performance write support

Writing to /proc/acpi/processor/xy/performance interferes with sysfs
cpufreq interface. Also removes buggy cpufreq_set_policy exported symbol.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>
2007-04-26 14:32:02 -04:00
David Brownell
8aa55591bf ACPI: make /proc/acpi/wakeup more useful
This updates /proc/acpi/wakeup to be more informative, primarily by showing
the sysfs node associated with each wakeup-enabled device.  Example:

	Device	S-state	  Status   Sysfs node
	PCI0	  S4	 disabled  no-bus:pci0000:00
	PS2M	  S4	 disabled  pnp:00:05
	PS2K	  S4	 disabled  pnp:00:06
	UAR1	  S4	 disabled  pnp:00:08
	USB1	  S3	 disabled  pci:0000:00:03.0
	USB2	  S3	 disabled  pci:0000:00:03.1
	USB3	  S3	 disabled
	USB4	  S3	 disabled  pci:0000:00:03.3
	S139	  S4	 disabled
	LAN	  S4	 disabled  pci:0000:00:04.0
	MDM	  S4	 disabled
	AUD	  S4	 disabled  pci:0000:00:02.7
	SLPB	  S4	*enabled

Eventually this file should be removed, but until then it's almost the only
way we have to tell how the relevant ACPI tables are broken (and cope).  In
that example, two devices don't actually exist (USB3, S139), one can't issue
wakeup events (PCI0), and two seem harmlessly (?) confused (MDM and AUD are
the same PCI device, but it's the _modem_ that does wake-on-ring).

In particular, we need to be sure driver model nodes are properly hooked
up before we can get rid of this ACPI-only interface for wakeup events.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-25 15:20:10 -04:00
Borislav Petkov
cf6c6045a0 ACPI: word-smith kconfig help
Signed-off-by: <bbpetkov@yahoo.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-25 14:29:50 -04:00
Bjorn Helgaas
0c0e892101 ACPI: use _STA bit names rather than 0x0F
Be explicit about what "device->status = 0x0F" really means.

syntax only.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-25 14:20:58 -04:00
Bjorn Helgaas
a0bd4ac498 ACPI: Remove duplicate definitions for _STA bits
No need to duplicate the existing definitions in include/acpi/actypes.h.

syntax only -- no functional change.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-25 14:17:39 -04:00
Ray Lee
d8938801d1 ACPI: remove duplicate include
Thomas's patch for including <asm/apic.h> for x86 UP builds came into
Linus's tree from two different directions, both of which were merged.
This reverts the latter, yanking out the duplicate #include and comment.

Signed-off-by: Ray Lee <ray-lk@madrabbit.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-25 14:12:00 -04:00
Andrew Morton
94e22e13ad acpi-thermal: fix mod_timer() interval
Use relative time, not absolute.  Discovered by Jung-Ik (John) Lee
<jilee@google.com>.

Cc: Jung-Ik (John) Lee <jilee@google.com>
Acked-by: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-24 08:23:08 -07:00
Len Brown
4e381a4f06 Revert "ACPI: parse 2nd MADT by default"
This reverts commit 09fe58356d.
http://bugzilla.kernel.org/show_bug.cgi?id=8283

Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-30 14:16:10 -04:00
Randy Dunlap
62a6d7fd9b ACPI: dock: use NULL for pointer
Use NULL instead of 0 for pointers:
drivers/acpi/dock.c:677:75: warning: Using plain integer as NULL pointer

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-28 23:31:43 -04:00
Henrique de Moraes Holschuh
3ede41c718 ACPI: ibm-acpi: move driver to drivers/misc hierarchy
ibm-acpi is not an ACPICA driver, so move it to drivers/misc as per Len
Brown's request.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-25 23:37:55 -04:00
Henrique de Moraes Holschuh
a62bc916cf ACPI: ibm-acpi: update copyright notice
Update copyright and license info on the source code comments.  No
functional changes.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-25 23:37:54 -04:00
Henrique de Moraes Holschuh
56b6aeb058 ACPI: ibm-acpi: organize code
Shuffle code around to better organize the driver code inside the
ibm-acpi.c file.

This patch adds no functional changes.  It is pure fluff that will make me
a bit more productive.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-25 23:37:54 -04:00
Henrique de Moraes Holschuh
1406cdd176 ACPI: ibm-acpi: add header file
Add a (private) header file for ibm-acpi, and move type definitions and
ThinkPad driver constants to the new header file.

This patch has no functional changes.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-25 23:37:54 -04:00
Henrique de Moraes Holschuh
e062e03438 ACPI: ibm-acpi: rename some identifiers
Rename some identifiers so that they are more in tune with the rest of the
driver code, or less generic.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-25 23:37:54 -04:00
Henrique de Moraes Holschuh
837ca6ddb4 ACPI: ibm-acpi: kill trailing whitespace
I shall protect the ibm-acpi city against the invasion of the barbarian
blanks!  To the unforgiving jaws of sed s/[[:blank:]]\+$// they go!

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-25 23:37:54 -04:00
Thomas Gleixner
e585bef815 [PATCH] i386: add command line option "local_apic_timer_c2_ok"
It turned out that it is almost impossible to trust ACPI, BIOS & Co.
regarding the C states. This was the reason to switch the local apic
timer off in C2 state already. OTOH there are sane and well behaving
systems, which get punished by that decision.

Allow the user to confirm that the local apic timer is trustworthy in C2
state. This keeps the default behaviour on the safe side.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23 10:21:02 -07:00
Linus Torvalds
296d93cd02 Revert "ACPI: Only use IPI on known broken machines (AMD, Dothan/BaniasPentium M)"
This reverts commit 25496caec1, which
broke bootup on at least Ingo's ThinkPad T60.  Need to figure out
exactly what is wrong before we can re-do the logic.

Requested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23 08:03:47 -07:00