Commit Graph

58 Commits

Author SHA1 Message Date
Tejun Heo
cc1887f3d8 [PATCH] libata: fix qc->n_elem == 0 case handling in ata_qc_next_sg
This patch makes ata_for_each_sg() start with pad_sgent when
qc->n_elem is zero.  Previously, ata_for_each_sg() unconditionally
started with qc->__sg, handling the first sg to fill_sg() routines
even when the entry was invalid.  And while at it, unwind ?: in
ata_qc_next_sg() into if statement.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 16:48:18 -05:00
Alan Cox
8d238e0124 [PATCH] libata: Fix heuristic typos add LBA48PIO flag and support code, add IRQ flag for next diff
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17 19:37:45 -05:00
Alan Cox
1bc4ccfff8 [PATCH] libata: add a function to decide if we need iordy
This ought to be simple but for PIO2 we have to poke around the drive
data to get it 100% correct.

Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17 08:25:39 -05:00
Linus Torvalds
d99cf9d679 Merge branch 'post-2.6.15' of git://brick.kernel.dk/data/git/linux-2.6-block
Manual fixup for merge with Jens' "Suspend support for libata", commit
ID 9b84754866.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 09:01:25 -08:00
Jens Axboe
9b84754866 [PATCH] Suspend support for libata
This patch adds suspend patch to libata, and ata_piix in particular. For
most low level drivers, they should just need to add the 4 hooks to
work. As I can only test ata_piix, I didn't enable it for more
though.

Suspend support is the single most important feature on a notebook, and
most new notebooks have sata drives. It's quite embarrassing that we
_still_ do not support this. Right now, it's perfectly possible to
suspend the drive in mid-transfer.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:36:09 -08:00
Tejun Heo
9a3dccc425 [BLOCK] add FUA support to libata
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 09:56:18 +01:00
Jeff Garzik
e508a391a0 Merge branch 'upstream-fixes' 2005-12-13 02:30:04 -05:00
Jeff Garzik
50630195bb [libata] mark certain hardware (or drivers) with a no-atapi flag
Some hardware does not support the PACKET command at all.
Other hardware supports ATAPI, but the driver does something nasty such
as calling BUG() when an ATAPI command is issued.

For these such cases, we mark them with a new flag, ATA_FLAG_NO_ATAPI.

Initial version contributed by Ben Collins.
2005-12-13 02:29:45 -05:00
Tejun Heo
b563230340 [PATCH] libata: remove unused qc->waiting
There is no user of qc->waiting left after ata_exec_internal()
changes.  Kill the field.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-13 01:34:46 -05:00
Tejun Heo
a2a7a662f8 [PATCH] libata: implement ata_exec_internal()
This patch implements ata_exec_internal() function which performs
libata internal command execution.  Previously, this was done by each
user by manually initializing a qc, issueing it, waiting for its
completion and handling errors.  In addition to obvious code
factoring, using ata_exec_internal() fixes the following bugs.

* qc not freed on issue failure
* ap->qactive clearing could race with the next internal command
* race between timeout handling and irq
* ignoring error condition not represented in tf->status

Also, qc & hardware are not accessed anymore once it's completed,
making internal commands more conformant with general semantics.
ata_exec_internal() also makes it easy to issue internal commands from
multiple threads if that becomes necessary.

This patch only implements ata_exec_internal().  A following patch
will convert all users.

Signed-off-by: Tejun Heo <htejun@gmail.com>

--

Jeff, all patches have been regenerated against upstream branch as of
today.  (575ab52a21)

Also, I took out a debug printk from ata_exec_internal (don't know how
that one got left there).  Other than that, all patches are identical
to the previous posting.

Thanks. :-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-13 01:34:45 -05:00
Albert Lee
a22e2eb071 [PATCH] libata: move err_mask to ata_queued_cmd
- remove err_mask from the parameter list of the complete functions
  - move err_mask to ata_queued_cmd
  - initialize qc->err_mask when needed
  - for each function call to ata_qc_complete(), replace the err_mask parameter with qc->err_mask.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

===============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-06 04:49:22 -05:00
Jeff Garzik
e74ac79956 [libata] remove two unused fields from struct ata_port 2005-11-14 18:16:37 -05:00
Jeff Garzik
2c13b7cee0 [libata] minor fixes, new helpers
- in ata_dev_identify(), don't assume that all devices are either
  ATA or ATAPI.  In the future, this code will see port multipliers
  and other devices.
- make a debugging printk less verbose
- add new helper ata_qc_reinit()
- add new helper BPRINTK() and port flag ATA_FLAG_DEBUGMSG, for
  fine-grained debugging use.
2005-11-14 14:14:16 -05:00
Linus Torvalds
d72d6f1b56 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 2005-11-11 14:04:37 -08:00
Alan Cox
e99f8b5efe [PATCH] libata: propogate host private data from probe function
This will let me chop the code size of several drivers right down. In
many cases the actual private data is very useful and constant for a
given host controller so being able to just pass it at probe time would
be very useful indeed (eg with the via driver would could pass the udma
clocking and reduce the code size, or with the AMD one the UDMA
multiplier and the offset)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11 08:19:55 -05:00
Andrew Morton
1c72d8d90d [PATCH] libata.h needs dma-mapping.h
On Alpha:

include/linux/libata.h: In function `ata_pad_alloc':
include/linux/libata.h:785: warning: implicit declaration of function `dma_alloc_coherent'
include/linux/libata.h:786: warning: assignment makes pointer from integer without a cast
include/linux/libata.h: In function `ata_pad_free':
include/linux/libata.h:792: warning: implicit declaration of function `dma_free_coherent'

(I have a decouple-some-header-files cleanup in -mm, so it's causing some
fallout of this nature)

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11 05:48:46 -05:00
Christoph Hellwig
d0be4a7d29 [SCSI] remove Scsi_Host_Template typedef
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09 15:44:09 -05:00
Jeff Garzik
193515d51c [libata] eliminate use of drivers/scsi/scsi.h compatibility header/defines 2005-11-07 00:59:37 -05:00
Jeff Garzik
6037d6bbdf [libata] ATAPI pad allocation fixes/cleanup
Use ata_pad_{alloc,free} in two drivers, to factor out common code.

Add ata_pad_{alloc,free} to two other drivers, which needed the padding
but had not been updated.
2005-11-04 22:08:00 -05:00
Jeff Garzik
054ee8fd39 Merge branch 'upstream' 2005-10-30 04:50:22 -05:00
Jeff Garzik
a7dac447bb [libata] change ata_qc_complete() to take error mask as second arg
The second argument to ata_qc_complete() was being used for two
purposes: communicate the ATA Status register to the completion
function, and indicate an error.  On legacy PCI IDE hardware, the latter
is often implicit in the former.  On more modern hardware, the driver
often completely emulated a Status register value, passing ATA_ERR as an
indication that something went wrong.

Now that previous code changes have eliminated the need to use drv_stat
arg to communicate the ATA Status register value, we can convert it to a
mask of possible error classes.

This will lead to more flexible error handling in the future.
2005-10-30 04:44:42 -05:00
Jeff Garzik
f0612bbc41 Merge branch 'upstream' 2005-10-30 01:58:18 -05:00
Jeff Garzik
0169e284f6 [libata] remove ata_chk_err(), ->check_err() hook.
We now depend on ->tf_read() to provide us with the contents
of the Error shadow register.
2005-10-29 21:25:10 -04:00
Jeff Garzik
7a9f8f93d2 Merge branch 'master' 2005-10-28 12:29:23 -04:00
Jeff Garzik
057ace5e79 libata: const-ification bombing run
Enforce access rules where appropriate.

If the compiler is smart enough, this may buy us an optimization or two
as a side effect.
2005-10-22 14:27:05 -04:00
Jeff Garzik
cf482935c6 libata: turn on block layer clustering 2005-10-22 00:19:33 -04:00
Alan Cox
452503f993 Add ide-timing functionality to libata.
This is needed for full AMD and VIA drivers and possibly more. Functions
to turn actual clocking and cycle timings into register values. Also to
merge shared timings to compute an optimal timing set.

Built from the drivers/ide version by Vojtech Pavlik

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 19:01:32 -04:00
Jeff Garzik
972c26bdd6 libata: add ata_sg_is_last() helper, use it in several drivers 2005-10-18 22:14:54 -04:00
Jeff Garzik
b194b4250c Merge branch 'upstream' 2005-10-18 21:52:42 -04:00
Albert Lee
8cbd6df1f0 [PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6)
- merge ata_prot_to_cmd() and ata_dev_set_protocol() as
       ata_rwcmd_protocol()
     - pave road for read/write multiple support
     - remove usage of pre-cached command and protocol values and call
       ata_rwcmd_protocol() instead

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

==============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 17:16:13 -04:00
Jeff Garzik
c4052da6f0 Merge branch 'upstream' 2005-10-09 11:16:14 -04:00
Jeff Garzik
cedc9a478d libata: fix ATAPI DMA alignment issues
ATAPI needs to be padded to next 4 byte boundary, if misaligned.

Original work by me, many fixes from Tejun Heo.
2005-10-05 07:13:30 -04:00
Jeff Garzik
67846b3017 libata: add ata_ratelimit(), use it in AHCI driver irq handler 2005-10-05 02:58:32 -04:00
Alan Cox
47a8659380 libata: bitmask based pci init functions for one or two ports
This redoes the n_ports logic I proposed before as a bitmask.
ata_pci_init_native_mode is now used with a mask allowing for mixed mode
stuff later on. ata_pci_init_legacy_port is called with port number and
does one port now not two. Instead it is called twice by the ata init
logic which cleans both of them up.

There are stil limits in the original code left over

- IRQ/port mapping for legacy mode should be arch specific values
- You can have one legacy mode IDE adapter per PCI root bridge on some systems
- Doesn't handle mixed mode devices yet (but is now a lot closer to it)
2005-10-04 08:09:19 -04:00
Jeff Garzik
64f09c98d7 /spare/repo/libata-dev branch 'chs-support' 2005-09-28 12:11:15 -04:00
Albert Lee
14be71f4c5 [PATCH] libata: rename host states
Changes:
s/PIO_ST_/HSM_ST_/ and s/pio_task_state/hsm_task_state/.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-28 11:58:39 -04:00
Jeff Garzik
98ed72deeb Merge /spare/repo/linux-2.6/ 2005-09-24 00:26:49 -04:00
Alan Cox
17b14451fd [PATCH] PATCH: remove function for non-PCI as requested
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-16 02:39:01 -04:00
Jeff Garzik
142e27fc8a Merge /spare/repo/linux-2.6/ 2005-09-08 05:41:28 -04:00
Jeff Garzik
d0bd99299b /spare/repo/libata-dev branch 'iomap-try3' 2005-09-05 05:20:33 -04:00
Jeff Garzik
374b187357 [libata] update several drivers to use pci_iomap()/pci_iounmap() 2005-08-30 05:42:52 -04:00
Jeff Garzik
1623c81eec [libata] allow ATAPI to be enabled with new atapi_enabled module option
ATAPI is getting close to being ready.  To increase exposure, we enable
the code in the upstream kernel, but default it to off (present
behavior).  Users must pass atapi_enabled=1 as a module option (if
module) or on the kernel command line (if built in) to turn on
discovery of their ATAPI devices.
2005-08-30 03:37:42 -04:00
Jeff Garzik
76b2bf9b4d Merge libata branch 'chs-support' to latest upstream kernel. 2005-08-29 19:24:43 -04:00
Jeff Garzik
70d374ea99 Merge /spare/repo/linux-2.6/ 2005-08-29 15:59:42 -04:00
Jeff Garzik
af36d7f0df [libata] license change, other bits
- changes license of all code from OSL+GPL to plain ole GPL
  - except for NVIDIA, who hasn't yet responded about sata_nv
  - copyright holders were already contacted privately

- adds info in each driver about where hardware/protocol docs may be
  obtained

- where I have made major contributions, updated copyright dates
2005-08-28 20:18:39 -04:00
Jeff Garzik
d18d36b4ed libata: fix a few alan-isms 2005-08-27 04:13:52 -04:00
Alan Cox
b73fc89f6d [PATCH] libata: regularize dma_start/stop arguments
Needed for a few PATA drivers.

Also fix up a wrong comment.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-26 17:36:26 -04:00
Tejun Heo
c138950371 [PATCH] fix atapi_packet_task vs. intr race (take 2)
Interrupts from devices sharing the same IRQ could cause
ata_host_intr to finish commands being processed by atapi_packet_task
if the commands are using ATA_PROT_ATAPI_NODATA or ATA_PROT_ATAPI_DMA
protocol.  This is because libata interrupt handler is unaware that
interrupts are not expected during that period.  This patch adds
ATA_FLAG_NOINTR flag to tell the interrupt handler that we're not
expecting interrupts.

 Note that once proper HSM is implemented for interrupt-driven PIO,
this should be merged into it and this flag will be removed.

 ahci.c is a different kind of beast, so it's left alone.

* The following drivers use ata_qc_issue_prot and ata_interrupt, so
  changes in libata core will do.

  ata_piix sata_sil sata_svw sata_via sata_sis sata_uli

* The following drivers use ata_qc_issue_prot and custom intr handler.
  They need this change to work correctly.

  sata_nv sata_vsc

* The following drivers use custom issue function and intr handler.
  Currently all custom issue functions don't support ATAPI, so this
  change is irrelevant, updated for consistency and to avoid later
  mistakes.

  sata_promise sata_qstor sata_sx4

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23 01:05:55 -04:00
Jeff Garzik
8a60a07129 libata: trim trailing whitespace.
Also, fixup a tabs-to-spaces block of code in ata_piix.
2005-07-31 13:13:24 -04:00
Jeff Garzik
ff40c6d3d1 Merge upstream kernel changes into 'C/H/S support' branch of libata. 2005-06-22 13:07:28 -04:00