The prioritized bit vector manipulation functions are useful in both vmx and
svm.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We ignore writes to the performance counters and performance event
selector registers already. Kaspersky antivirus reads the eventsel
MSR causing it to crash with the current behaviour.
Return 0 as data when the eventsel registers are read to stop the
crash.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
free_mmu_pages() should only undo what alloc_mmu_pages() does.
Free mmu pages from the generic VM destruction function, kvm_destroy_vm().
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
After discussion with Marcelo, we decided to rework device assignment framework
together. The old problems are kernel logic is unnecessary complex. So Marcelo
suggest to split it into a more elegant way:
1. Split host IRQ assign and guest IRQ assign. And userspace determine the
combination. Also discard msi2intx parameter, userspace can specific
KVM_DEV_IRQ_HOST_MSI | KVM_DEV_IRQ_GUEST_INTX in assigned_irq->flags to
enable MSI to INTx convertion.
2. Split assign IRQ and deassign IRQ. Import two new ioctls:
KVM_ASSIGN_DEV_IRQ and KVM_DEASSIGN_DEV_IRQ.
This patch also fixed the reversed _IOR vs _IOW in definition(by deprecated the
old interface).
[avi: replace homemade bitcount() by hweight_long()]
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Fix this sparse warnings:
arch/x86/kvm/lapic.c:916:22: warning: symbol 'lapic_timer_ops' was not declared. Should it be static?
arch/x86/kvm/i8254.c:268:22: warning: symbol 'kpit_ops' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
The new way does not require additional loop over vcpus to calculate
the one with lowest priority as one is chosen during delivery bitmap
construction.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Use kvm_apic_match_dest() in kvm_get_intr_delivery_bitmask() instead
of duplicating the same code. Use kvm_get_intr_delivery_bitmask() in
apic_send_ipi() to figure out ipi destination instead of reimplementing
the logic.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Get rid of ioapic_inj_irq() and ioapic_inj_nmi() functions.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
There is no reason to update the shadow pte here because the guest pte
is only changed to dirty state.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Hide the internals of vcpu awakening / injection from the in-kernel
emulated timers. This makes future changes in this logic easier and
decreases the distance to more generic timer handling.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We can infer elapsed time from hrtimer_expires_remaining.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This issue just appeared in kvm-84 when running on 2.6.28.7 (x86-64)
with PREEMPT enabled.
We're getting syslog warnings like this many (but not all) times qemu
tells KVM to run the VCPU:
BUG: using smp_processor_id() in preemptible [00000000] code:
qemu-system-x86/28938
caller is kvm_arch_vcpu_ioctl_run+0x5d1/0xc70 [kvm]
Pid: 28938, comm: qemu-system-x86 2.6.28.7-mtyrel-64bit
Call Trace:
debug_smp_processor_id+0xf7/0x100
kvm_arch_vcpu_ioctl_run+0x5d1/0xc70 [kvm]
? __wake_up+0x4e/0x70
? wake_futex+0x27/0x40
kvm_vcpu_ioctl+0x2e9/0x5a0 [kvm]
enqueue_hrtimer+0x8a/0x110
_spin_unlock_irqrestore+0x27/0x50
vfs_ioctl+0x31/0xa0
do_vfs_ioctl+0x74/0x480
sys_futex+0xb4/0x140
sys_ioctl+0x99/0xa0
system_call_fastpath+0x16/0x1b
As it turns out, the call trace is messed up due to gcc's inlining, but
I isolated the problem anyway: kvm_write_guest_time() is being used in a
non-thread-safe manner on preemptable kernels.
Basically kvm_write_guest_time()'s body needs to be surrounded by
preempt_disable() and preempt_enable(), since the kernel won't let us
query any per-CPU data (indirectly using smp_processor_id()) without
preemption disabled. The attached patch fixes this issue by disabling
preemption inside kvm_write_guest_time().
[marcelo: surround only __get_cpu_var calls since the warning
is harmless]
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
It's also convenient when we extend KVM supported vcpu number in the future.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Would be used with bit ops, and would be easily extended if KVM_MAX_VCPUS is
increased.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Windows 2008 accesses this MSR often on context switch intensive workloads;
since we run in guest context with the guest MSR value loaded (so swapgs can
work correctly), we can simply disable interception of rdmsr/wrmsr for this
MSR.
A complication occurs since in legacy mode, we run with the host MSR value
loaded. In this case we enable interception. This means we need two MSR
bitmaps, one for legacy mode and one for long mode.
Signed-off-by: Avi Kivity <avi@redhat.com>
The processor is documented to reload the PDPTRs while in PAE mode if any
of the CR4 bits PSE, PGE, or PAE change. Linux relies on this
behaviour when zapping the low mappings of PAE kernels during boot.
The code already handled changes to CR4.PAE; augment it to also notice changes
to PSE and PGE.
This triggered while booting an F11 PAE kernel; the futex initialization code
runs before any CR3 reloads and writes to a NULL pointer; the futex subsystem
ended up uninitialized, killing PI futexes and pulseaudio which uses them.
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
The paravirt tlb flush may be used not only to flush TLBs, but also
to reload the four page-directory-pointer-table entries, as it is used
as a replacement for reloading CR3. Change the code to do the entire
CR3 reloading dance instead of simply flushing the TLB.
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
KVM optimizes guest port 80 accesses by passthing them through to the host.
Some AMD machines die on port 80 writes, allowing the guest to hard-lock the
host.
Remove the port passthrough to avoid the problem.
Cc: stable@kernel.org
Reported-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Tested-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Some processors don't have EFER; don't oops if userspace wants us to
read EFER when we check NX.
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
AMDs VMCB does not have an explicit unusable segment descriptor field,
so we emulate it by using "not present". This has to be setup before
the fixups, because this field is used there.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Properly unregister cpufreq notifier on onload if it was registered
during init.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Not releasing the time_page causes a leak of that page or the compound
page it is situated in.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
vmx_set_msr() does not allow i386 guests to touch EFER, but they can still
do so through the default: label in the switch. If they set EFER_LME, they
can oops the host.
Fix by having EFER access through the normal channel (which will check for
EFER_LME) even on i386.
Reported-and-tested-by: Benjamin Gilbert <bgilbert@cs.cmu.edu>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
When kvm emulates an invlpg instruction, it can drop a shadow pte, but
leaves the guest tlbs intact. This can cause memory corruption when
swapping out.
Without this the other cpu can still write to a freed host physical page.
tlb smp flush must happen if rmap_remove is called always before mmu_lock
is released because the VM will take the mmu_lock before it can finally add
the page to the freelist after swapout. mmu notifier makes it safe to flush
the tlb after freeing the page (otherwise it would never be safe) so we can do
a single flush for multiple sptes invalidated.
Cc: stable@kernel.org
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Impact: Make symbols static.
Fix this sparse warnings:
arch/x86/kvm/mmu.c:992:5: warning: symbol 'mmu_pages_add' was not declared. Should it be static?
arch/x86/kvm/mmu.c:1124:5: warning: symbol 'mmu_pages_next' was not declared. Should it be static?
arch/x86/kvm/mmu.c:1144:6: warning: symbol 'mmu_pages_clear_parents' was not declared. Should it be static?
arch/x86/kvm/x86.c:2037:5: warning: symbol 'kvm_read_guest_virt' was not declared. Should it be static?
arch/x86/kvm/x86.c:2067:5: warning: symbol 'kvm_write_guest_virt' was not declared. Should it be static?
virt/kvm/irq_comm.c:220:5: warning: symbol 'setup_routing_entry' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Impact: Attribute function with __acquires(...) resp. __releases(...).
Fix this sparse warnings:
arch/x86/kvm/i8259.c:34:13: warning: context imbalance in 'pic_lock' - wrong count at exit
arch/x86/kvm/i8259.c:39:13: warning: context imbalance in 'pic_unlock' - unexpected unlock
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
is_long_mode currently checks the LongModeEnable bit in
EFER instead of the LongModeActive bit. This is wrong, but
we survived this till now since it wasn't triggered. This
breaks guests that go from long mode to compatibility mode.
This is noticed on a solaris guest and fixes bug #1842160
Signed-off-by: Amit Shah <amit.shah@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
setup_msrs() should be called when entering long mode to save the
shadow state for the 64-bit guest state.
Using vmx_set_efer() in enter_lmode() removes some duplicated code
and also ensures we call setup_msrs(). We can safely pass the value
of shadow_efer to vmx_set_efer() as no other bits in the efer change
while enabling long mode (guest first sets EFER.LME, then sets CR0.PG
which causes a vmexit where we activate long mode).
With this fix, is_long_mode() can check for EFER.LMA set instead of
EFER.LME and 5e23049e86dd298b72e206b420513dbc3a240cd9 can be reverted.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In the paging_fetch function rmap_remove is called after setting a large
pte to non-present. This causes rmap_remove to not drop the reference to
the large page. The result is a memory leak of that page.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In the segment descriptor _cache_ the accessed bit is always set
(although it can be cleared in the descriptor itself). Since Intel
checks for this condition on a VMENTRY, set this bit in the AMD path
to enable cross vendor migration.
Cc: stable@kernel.org
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Acked-By: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
IRQ injection status is either -1 (if there was no CPU found
that should except the interrupt because IRQ was masked or
ioapic was misconfigured or ...) or >= 0 in that case the
number indicates to how many CPUs interrupt was injected.
If the value is 0 it means that the interrupt was coalesced
and probably should be reinjected.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The assertion no longer makes sense since we don't clear page tables on
allocation; instead we clear them during prefetch.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The following code flow is unnecessary:
if (largepage)
was_rmapped = is_large_pte(*shadow_pte);
else
was_rmapped = 1;
The is_large_pte() function will always evaluate to one here because the
(largepage && !is_large_pte) case is already handled in the first
if-clause. So we can remove this check and set was_rmapped to one always
here.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvmclock currently falls apart on machines without constant tsc.
This patch fixes it. Changes:
* keep tsc frequency in a per-cpu variable.
* handle kvmclock update using a new request flag, thus checking
whenever we need an update each time we enter guest context.
* use a cpufreq notifier to track frequency changes and force
kvmclock updates.
* send ipis to kick cpu out of guest context if needed to make
sure the guest doesn't see stale values.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Looks like neither the direction nor the rep prefix are used anymore.
Drop related evaluations from SVM's and VMX's I/O exit handlers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
AMD K10 CPUs implement the FFXSR feature that gets enabled using
EFER. Let's check if the virtual CPU description includes that
CPUID feature bit and allow enabling it then.
This is required for Windows Server 2008 in Hyper-V mode.
v2 adds CPUID capability exposure
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
IRQ ack notifications assume an identity mapping between pin->gsi,
which might not be the case with, for example, HPET.
Translate before acking.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Currently KVM has a static routing from GSI numbers to interrupts (namely,
0-15 are mapped 1:1 to both PIC and IOAPIC, and 16:23 are mapped 1:1 to
the IOAPIC). This is insufficient for several reasons:
- HPET requires non 1:1 mapping for the timer interrupt
- MSIs need a new method to assign interrupt numbers and dispatch them
- ACPI APIC mode needs to be able to reassign the PCI LINK interrupts to the
ioapics
This patch implements an interrupt routing table (as a linked list, but this
can be easily changed) and a userspace interface to replace the table. The
routing table is initialized according to the current hardwired mapping.
Signed-off-by: Avi Kivity <avi@redhat.com>
Some typos, comments, whitespace errors corrected in the cpuid code
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This actually describes what is going on, rather than alerting the reader
that something strange is going on.
Signed-off-by: Avi Kivity <avi@redhat.com>
Zeroing on mmu_memory_cache_alloc is unnecessary since:
- Smaller areas are pre-allocated with kmem_cache_zalloc.
- Page pointed by ->spt is overwritten with prefetch_page
and entries in page pointed by ->gfns are initialized
before reading.
[avi: zeroing pages is unnecessary]
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
While the PIT is masked the guest cannot ack the irq, so the reinject logic
will never allow the interrupt to be injected.
Fix by resetting the reinjection counters on unmask.
Unbreaks Xen.
Signed-off-by: Avi Kivity <avi@redhat.com>
Two KVM archs support irqchips and two don't. Add a Kconfig item to
make selecting between the two models easier.
Signed-off-by: Avi Kivity <avi@redhat.com>
Using kvm_mmu_lookup_page() will result in multiple scans of the hash chains;
use hlist_for_each_entry_safe() to achieve a single scan instead.
Signed-off-by: Avi Kivity <avi@redhat.com>
VMware ESX checks if the microcode level is correct when using a barcelona
CPU, in order to see if it actually can use SVM. Let's tell it we're on the
safe side...
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Allow emulate_pop() to read into arbitrary memory rather than just the
source operand. Needed for complicated instructions like far returns.
Signed-off-by: Avi Kivity <avi@redhat.com>
If we've just emulated an instruction, we won't have any valid exit
reason and associated information.
Fix by moving the clearing of the emulation_required flag to the exit handler.
This way the exit handler can notice that we've been emulating and abort
early.
Signed-off-by: Avi Kivity <avi@redhat.com>
Certain clocks (such as TSC) in older 2.6 guests overaccount for lost
ticks, causing severe time drift. Interrupt reinjection magnifies the
problem.
Provide an option to disable it.
[avi: allow room for expansion in case we want to disable reinjection
of other timers]
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Since we advertise MSR_VM_HSAVE_PA, userspace will attempt to read it
even on Intel. Implement fake support for this MSR to avoid the
warnings.
Signed-off-by: Avi Kivity <avi@redhat.com>
vmap() on guest pages hides those pages from the Linux mm for an extended
(userspace determined) amount of time. Get rid of it.
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This commit change the name of emulator_read_std into kvm_read_guest_virt,
and add new function name kvm_write_guest_virt that allow writing into a
guest virtual address.
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
VMX initializes the TSC offset for each vcpu at different times, and
also reinitializes it for vcpus other than 0 on APIC SIPI message.
This bug causes the TSC's to appear unsynchronized in the guest, even if
the host is good.
Older Linux kernels don't handle the situation very well, so
gettimeofday is likely to go backwards in time:
http://www.mail-archive.com/kvm@vger.kernel.org/msg02955.htmlhttp://sourceforge.net/tracker/index.php?func=detail&aid=2025534&group_id=180599&atid=893831
Fix it by initializating the offset of each vcpu relative to vm creation
time, and moving it from vmx_vcpu_reset to vmx_vcpu_setup, out of the
APIC MP init path.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Using a for_each loop style removes the need to write callback and nasty
casts.
Implement the walk_shadow() using the for_each_shadow_entry().
Signed-off-by: Avi Kivity <avi@redhat.com>
The AMD SVM instruction family all overload the 0f 01 /3 opcode, further
multiplexing on the three r/m bits. But the code decided that anything that
isn't a vmmcall must be an lidt (which shares the 0f 01 /3 opcode, for the
case that mod = 3).
Fix by aborting emulation if this isn't a vmmcall.
Signed-off-by: Avi Kivity <avi@redhat.com>
If cr4.pge is cleared, we ought to treat any ptes in the page as non-global.
This allows us to remove the check from set_spte().
Signed-off-by: Avi Kivity <avi@redhat.com>
Don't allow a vcpu with cr4.pge cleared to use a shadow page created with
cr4.pge set; this might cause a cr3 switch not to sync ptes that have the
global bit set (the global bit has no effect if !cr4.pge).
This can only occur on smp with different cr4.pge settings for different
vcpus (since a cr4 change will resync the shadow ptes), but there's no
cost to being correct here.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of "calculating" it on every shadow page allocation, set it once
when switching modes, and copy it when allocating pages.
This doesn't buy us much, but sets up the stage for inheriting more
information related to the mmu setup.
Signed-off-by: Avi Kivity <avi@redhat.com>
Add the remaining bits to make use of debug registers also for guest
debugging, thus enabling the use of hardware breakpoints and
watchpoints.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
So far KVM only had basic x86 debug register support, once introduced to
realize guest debugging that way. The guest itself was not able to use
those registers.
This patch now adds (almost) full support for guest self-debugging via
hardware registers. It refactors the code, moving generic parts out of
SVM (VMX was already cleaned up by the KVM_SET_GUEST_DEBUG patches), and
it ensures that the registers are properly switched between host and
guest.
This patch also prepares debug register usage by the host. The latter
will (once wired-up by the following patch) allow for hardware
breakpoints/watchpoints in guest code. If this is enabled, the guest
will only see faked debug registers without functionality, but with
content reflecting the guest's modifications.
Tested on Intel only, but SVM /should/ work as well, but who knows...
Known limitations: Trapping on tss switch won't work - most probably on
Intel.
Credits also go to Joerg Roedel - I used his once posted debugging
series as platform for this patch.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When single-stepping over STI and MOV SS, we must clear the
corresponding interruptibility bits in the guest state. Otherwise
vmentry fails as it then expects bit 14 (BS) in pending debug exceptions
being set, but that's not correct for the guest debugging case.
Note that clearing those bits is safe as we check for interruptibility
based on the original state and do not inject interrupts or NMIs if
guest interruptibility was blocked.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This rips out the support for KVM_DEBUG_GUEST and introduces a new IOCTL
instead: KVM_SET_GUEST_DEBUG. The IOCTL payload consists of a generic
part, controlling the "main switch" and the single-step feature. The
arch specific part adds an x86 interface for intercepting both types of
debug exceptions separately and re-injecting them when the host was not
interested. Moveover, the foundation for guest debugging via debug
registers is layed.
To signal breakpoint events properly back to userland, an arch-specific
data block is now returned along KVM_EXIT_DEBUG. For x86, the arch block
contains the PC, the debug exception, and relevant debug registers to
tell debug events properly apart.
The availability of this new interface is signaled by
KVM_CAP_SET_GUEST_DEBUG. Empty stubs for not yet supported archs are
provided.
Note that both SVM and VTX are supported, but only the latter was tested
yet. Based on the experience with all those VTX corner case, I would be
fairly surprised if SVM will work out of the box.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
VMX differentiates between processor and software generated exceptions
when injecting them into the guest. Extend vmx_queue_exception
accordingly (and refactor related constants) so that we can use this
service reliably for the new guest debugging framework.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Userspace has to tell the kernel module somehow that nested SVM should be used.
The easiest way that doesn't break anything I could think of is to implement
if (cpuid & svm)
allow write to efer
else
deny write to efer
Old userspaces mask the SVM capability bit, so they don't break.
In order to find out that the SVM capability is set, I had to split the
kvm_emulate_cpuid into a finding and an emulating part.
(introduced in v6)
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Normally setting the SVME bit in EFER is not allowed, as we did
not support SVM. Not since we do, we should also allow enabling
SVM mode.
v2 comes as last patch, so we don't enable half-ready code
v4 introduces a module option to enable SVM
v6 warns that nesting is enabled
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
KVM tries to read the VM_CR MSR to find out if SVM was disabled by
the BIOS. So implement read support for this MSR to make nested
SVM running.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
This adds the #VMEXIT intercept, so we return to the level 1 guest
when something happens in the level 2 guest that should return to
the level 1 guest.
v2 implements HIF handling and cleans up exception interception
v3 adds support for V_INTR_MASKING_MASK
v4 uses the host page hsave
v5 removes IOPM merging code
v6 moves mmu code out of the atomic section
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch implements VMRUN. VMRUN enters a virtual CPU and runs that
in the same context as the normal guest CPU would run.
So basically it is implemented the same way, a normal CPU would do it.
We also prepare all intercepts that get OR'ed with the original
intercepts, as we do not allow a level 2 guest to be intercepted less
than the first level guest.
v2 implements the following improvements:
- fixes the CPL check
- does not allocate iopm when not used
- remembers the host's IF in the HIF bit in the hflags
v3:
- make use of the new permission checking
- add support for V_INTR_MASKING_MASK
v4:
- use host page backed hsave
v5:
- remove IOPM merging code
v6:
- save cr4 so PAE l1 guests work
v7:
- return 0 on vmrun so we check the MSRs too
- fix MSR check to use the correct variable
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
This implements the VMLOAD and VMSAVE instructions, that usually surround
the VMRUN instructions. Both instructions load / restore the same elements,
so we only need to implement them once.
v2 fixes CPL checking and replaces memcpy by assignments
v3 makes use of the new permission checking
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Implement the hsave MSR, that gives the VCPU a GPA to save the
old guest state in.
v2 allows userspace to save/restore hsave
v4 dummys out the hsave MSR, so we use a host page
v6 remembers the guest's hsave and exports the MSR
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch implements the GIF flag and the clgi and stgi instructions that
set this flag. Only if the flag is set (default), interrupts can be received by
the CPU.
To keep the information about that somewhere, this patch adds a new hidden
flags vector. that is used to store information that does not go into the
vmcb, but is SVM specific.
I tried to write some code to make -no-kvm-irqchip work too, but the first
level guest won't even boot with that atm, so I ditched it.
v2 moves the hflags to x86 generic code
v3 makes use of the new permission helper
v6 only enables interrupt_window if GIF=1
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
These are helpers for the nested SVM implementation.
- nsvm_printk implements a debug printk variant
- nested_svm_do calls a handler that can accesses gpa-based memory
v3 makes use of the new permission checker
v6 changes:
- streamline nsvm_debug()
- remove printk(KERN_ERR)
- SVME check before CPL check
- give GP error code
- use new EFER constant
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
MSR_EFER_SVME_MASK, MSR_VM_CR and MSR_VM_HSAVE_PA are set in KVM
specific headers. Linux does have nice header files to collect
EFER bits and MSR IDs, so IMHO we should put them there.
While at it, I also changed the naming scheme to match that
of the other defines.
(introduced in v6)
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
The current VINTR intercept setters don't look clean to me. To make
the code easier to read and enable the possibilty to trap on a VINTR
set, this uses a helper function to set the VINTR intercept.
v2 uses two distinct functions for setting and clearing the bit
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Some msrs (notable MSR_KERNEL_GS_BASE) are held in the processor registers
and need to be flushed to the vcpu struture before they can be read.
This fixes cygwin longjmp() failure on Windows x64.
Signed-off-by: Avi Kivity <avi@redhat.com>
Simplify LAPIC TMCCT calculation by using hrtimer provided
function to query remaining time until expiration.
Fixes host hang with nested ESX.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Software are not allow to access device MMIO using cacheable memory type, the
patch limit MMIO region with UC and WC(guest can select WC using PAT and
PCD/PWT).
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This is better.
Currently, this code path is posing us big troubles,
and we won't have a decent patch in time. So, temporarily
disable it.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
count_load_time assignment is bogus: its supposed to contain what it
means, not the expiration time.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In the past, kvm_get_kvm() and kvm_put_kvm() was called in assigned device irq
handler and interrupt_work, in order to prevent cancel_work_sync() in
kvm_free_assigned_irq got a illegal state when waiting for interrupt_work done.
But it's tricky and still got two problems:
1. A bug ignored two conditions that cancel_work_sync() would return true result
in a additional kvm_put_kvm().
2. If interrupt type is MSI, we would got a window between cancel_work_sync()
and free_irq(), which interrupt would be injected again...
This patch discard the reference count used for irq handler and interrupt_work,
and ensure the legal state by moving the free function at the very beginning of
kvm_destroy_vm(). And the patch fix the second bug by disable irq before
cancel_work_sync(), which may result in nested disable of irq but OK for we are
going to free it.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_arch_sync_events is introduced to quiet down all other events may happen
contemporary with VM destroy process, like IRQ handler and work struct for
assigned device.
For kvm_arch_sync_events is called at the very beginning of kvm_destroy_vm(), so
the state of KVM here is legal and can provide a environment to quiet down other
events.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Impact: file renamed
The code in the vtd.c file can be reused for other IOMMUs as well. So
rename it to make it clear that it handle more than VT-d.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The invlpg and sync walkers lack knowledge of large host sptes,
descending to non-existant pagetable level.
Stop at directory level in such case.
Fixes SMP Windows XP with hugepages.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
While most accesses to the i8259 are with the kvm mutex taken, the call
to kvm_pic_read_irq() is not. We can't easily take the kvm mutex there
since the function is called with interrupts disabled.
Fix by adding a spinlock to the virtual interrupt controller. Since we
can't send an IPI under the spinlock (we also take the same spinlock in
an irq disabled context), we defer the IPI until the spinlock is released.
Similarly, we defer irq ack notifications until after spinlock release to
avoid lock recursion.
Signed-off-by: Avi Kivity <avi@redhat.com>
The pte.g bit is meaningless if global pages are disabled; deferring
mmu page synchronization on these ptes will lead to the guest using stale
shadow ptes.
Fixes Vista x86 smp bootloader failure.
Signed-off-by: Avi Kivity <avi@redhat.com>
There is no point in doing the ready_for_nmi_injection/
request_nmi_window dance with user space. First, we don't do this for
in-kernel irqchip anyway, while the code path is the same as for user
space irqchip mode. And second, there is nothing to loose if a pending
NMI is overwritten by another one (in contrast to IRQs where we have to
save the number). Actually, there is even the risk of raising spurious
NMIs this way because the reason for the held-back NMI might already be
handled while processing the first one.
Therefore this patch creates a simplified user space NMI injection
interface, exporting it under KVM_CAP_USER_NMI and dropping the old
KVM_CAP_NMI capability. And this time we also take care to provide the
interface only on archs supporting NMIs via KVM (right now only x86).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
As with the kernel irqchip, don't allow an NMI to stomp over an already
injected IRQ; instead wait for the IRQ injection to be completed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
walk_shadow assumes the caller verified validity of the pdptr pointer in
question, which is not the case for the invlpg handler.
Fixes oops during Solaris 10 install.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the guest executes invlpg, peek into the pagetable and attempt to
prepopulate the shadow entry.
Also stop dirty fault updates from interfering with the fork detector.
2% improvement on RHEL3/AIM7.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Skip syncing global pages on cr3 switch (but not on cr4/cr0). This is
important for Linux 32-bit guests with PAE, where the kmap page is
marked as global.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Collapse remote TLB flushes on root sync.
kernbench is 2.7% faster on 4-way guest. Improvements have been seen
with other loads such as AIM7.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of invoking the handler directly collect pages into
an array so the caller can work with it.
Simplifies TLB flush collapsing.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The VMMCALL instruction doesn't get recognised and isn't processed
by the emulator.
This is seen on an Intel host that tries to execute the VMMCALL
instruction after a guest live migrates from an AMD host.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add emulation of shld and shrd instructions
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add the assembler code for instruction with three operands and one
operand is stored in ECX register
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add SrcOne operand type when we need to decode an implied '1' like with
regular shift instruction
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instruction like shld has three operands, so we need to add a Src2
decode set. We start with Src2None, Src2CL, and Src2ImmByte, Src2One to
support shld/shrd and we will expand it later.
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Extend the opcode descriptor to 32 bits. This is needed by the
introduction of a new Src2 operand type.
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Impact: make global function static
arch/x86/kvm/vmx.c:134:3: warning: symbol 'vmx_capability' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
The write protect verification in set_spte is unnecessary for page sync.
Its guaranteed that, if the unsync spte was writable, the target page
does not have a write protected shadow (if it had, the spte would have
been write protected under mmu_lock by rmap_write_protect before).
Same reasoning applies to mark_page_dirty: the gfn has been marked as
dirty via the pagefault path.
The cost of hash table and memslot lookups are quite significant if the
workload is pagetable write intensive resulting in increased mmu_lock
contention.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If we're injecting an interrupt, and another one is pending, request
an interrupt window notification so we don't have excess latency on the
second interrupt.
This shouldn't happen in practice since an EOI will be issued, giving a second
chance to request an interrupt window, but...
Signed-off-by: Avi Kivity <avi@redhat.com>
Use a trick to keep the printk()s on has_svm() working as before. gcc
will take care of not generating code for the 'msg' stuff when the
function is called with a NULL msg argument.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Along with some comments on why it is different from the core cpu_vmxoff()
function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
It will be used by core code on kdump and reboot, to disable
vmx if needed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
svm.h will be used by core code that is independent of KVM, so I am
moving it outside the arch/x86/kvm directory.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
vmx.h will be used by core code that is independent of KVM, so I am
moving it outside the arch/x86/kvm directory.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The code to traverse the cpuid data array list for counting type of leaves is
currently broken.
This patches fixes the 2 things in it.
1. Set the 1st counting entry's flag KVM_CPUID_FLAG_STATE_READ_NEXT. Without
it the code will never find a valid entry.
2. Also the stop condition in the for loop while looking for the next unflaged
entry is broken. It needs to stop when it find one matching entry;
and in the case of count of 1, it will be the same entry found in this
iteration.
Signed-Off-By: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
For cpuid leaf 0xb the bits 8-15 in ECX register define the end of counting
leaf. The previous code was using bits 0-7 for this purpose, which is
a bug.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Some areas of kvm x86 mmu are using gfn offset inside a slot without
unaliasing the gfn first. This patch makes sure that the gfn will be
unaliased and add gfn_to_memslot_unaliased() to save the calculating
of the gfn unaliasing in case we have it unaliased already.
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Ideally, every assigned device should in a clear condition before and after
assignment, so that the former state of device won't affect later work.
Some devices provide a mechanism named Function Level Reset, which is
defined in PCI/PCI-e document. We should execute it before and after device
assignment.
(But sadly, the feature is new, and most device on the market now don't
support it. We are considering using D0/D3hot transmit to emulate it later,
but not that elegant and reliable as FLR itself.)
[Update: Reminded by Xiantao, execute FLR after we ensure that the device can
be assigned to the guest.]
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If emulate_invalid_guest_state is enabled, the emulator is called
when guest state is invalid. Until now, we reported an mmio failure
when emulate_instruction() returned EMULATE_DO_MMIO. This patch adds
the case where emulate_instruction() failed and an MMIO emulation
is needed.
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
If we call the emulator we shouldn't call skip_emulated_instruction()
in the first place, since the emulator already computes the next rip
for us. Thus we move ->skip_emulated_instruction() out of
kvm_emulate_pio() and into handle_io() (and the svm equivalent). We
also replaced "return 0" by "break" in the "do_io:" case because now
the shadow register state needs to be committed. Otherwise eip will never
be updated.
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
The busy flag of the TR selector is not set by the hardware. This breaks
migration from amd hosts to intel hosts.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The hardware does not set the 'g' bit of the cs selector and this breaks
migration from amd hosts to intel hosts. Set this bit if the segment
limit is beyond 1 MB.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
As suggested by Avi, this patch introduces a counter of VCPUs that have
LVT0 set to NMI mode. Only if the counter > 0, we push the PIT ticks via
all LAPIC LVT0 lines to enable NMI watchdog support.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch refactors the NMI watchdog delivery patch, consolidating
tests and providing a proper API for delivering watchdog events.
An included micro-optimization is to check only for apic_hw_enabled in
kvm_apic_local_deliver (the test for LVT mask is covering the
soft-disabled case already).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
PCI device assignment would map guest MMIO spaces as separate slot, so it is
possible that the device has more than 2 MMIO spaces and overwrite current
private memslot.
The patch move private memory slot to the top of userspace visible memory slots.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Otherwise set_bit() for private memory slot(above KVM_MEMORY_SLOTS) would
corrupted memory in 32bit host.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The effective memory type of EPT is the mixture of MSR_IA32_CR_PAT and memory
type field of EPT entry.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
GUEST_PAT support is a new feature introduced by Intel Core i7 architecture.
With this, cpu would save/load guest and host PAT automatically, for EPT memory
type in guest depends on MSR_IA32_CR_PAT.
Also add save/restore for MSR_IA32_CR_PAT.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Call kvm_arch_vcpu_reset() instead of directly using arch callback.
The function does additional things.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Older VMX supporting CPUs do not provide the "Virtual NMI" feature for
tracking the NMI-blocked state after injecting such events. For now
KVM is unable to inject NMIs on those CPUs.
Derived from Sheng Yang's suggestion to use the IRQ window notification
for detecting the end of NMI handlers, this patch implements virtual
NMI support without impact on the host's ability to receive real NMIs.
The downside is that the given approach requires some heuristics that
can cause NMI nesting in vary rare corner cases.
The approach works as follows:
- inject NMI and set a software-based NMI-blocked flag
- arm the IRQ window start notification whenever an NMI window is
requested
- if the guest exits due to an opening IRQ window, clear the emulated
NMI-blocked flag
- if the guest net execution time with NMI-blocked but without an IRQ
window exceeds 1 second, force NMI-blocked reset and inject anyway
This approach covers most practical scenarios:
- succeeding NMIs are seperated by at least one open IRQ window
- the guest may spin with IRQs disabled (e.g. due to a bug), but
leaving the NMI handler takes much less time than one second
- the guest does not rely on strict ordering or timing of NMIs
(would be problematic in virtualized environments anyway)
Successfully tested with the 'nmi n' monitor command, the kgdbts
testsuite on smp guests (additional patches required to add debug
register support to kvm) + the kernel's nmi_watchdog=1, and a Siemens-
specific board emulation (+ guest) that comes with its own NMI
watchdog mechanism.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds the required bits to the VMX side for user space
injected NMIs. As with the preexisting in-kernel irqchip support, the
CPU must provide the "virtual NMI" feature for proper tracking of the
NMI blocking state.
Based on the original patch by Sheng Yang.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduces the KVM_NMI IOCTL to the generic x86 part of KVM for
injecting NMIs from user space and also extends the statistic report
accordingly.
Based on the original patch by Sheng Yang.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Kick the NMI receiving VCPU in case the triggering caller runs in a
different context.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Ensure that a VCPU with pending NMIs is considered runnable.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
LINT0 of the LAPIC can be used to route PIT events as NMI watchdog ticks
into the guest. This patch aligns the in-kernel irqchip emulation with
the user space irqchip with already supports this feature. The trick is
to route PIT interrupts to all LAPIC's LVT0 lines.
Rebased and slightly polished patch originally posted by Sheng Yang.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Fix NMI injection in real-mode with the same pattern we perform IRQ
injection.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
do_interrupt_requests and vmx_intr_assist go different way for
achieving the same: enabling the nmi/irq window start notification.
Unify their code over enable_{irq|nmi}_window, get rid of a redundant
call to enable_intr_window instead of direct enable_nmi_window
invocation and unroll enable_intr_window for both in-kernel and user
space irq injection accordingly.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
There are currently two ways in VMX to check if an IRQ or NMI can be
injected:
- vmx_{nmi|irq}_enabled and
- vcpu.arch.{nmi|interrupt}_window_open.
Even worse, one test (at the end of vmx_vcpu_run) uses an inconsistent,
likely incorrect logic.
This patch consolidates and unifies the tests over
{nmi|interrupt}_window_open as cache + vmx_update_window_states
for updating the cache content.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
CPU reset invalidates pending or already injected NMIs, therefore reset
the related state variables.
Based on original patch by Gleb Natapov.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Properly set GUEST_INTR_STATE_NMI and reset nmi_injected when a
task-switch vmexit happened due to a task gate being used for handling
NMIs. Also avoid the false warning about valid vectoring info in
kvm_handle_exit.
Based on original patch by Gleb Natapov.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
irq_window_exits only tracks IRQ window exits due to user space
requests, nmi_window_exits include all exits. The latter makes more
sense, so let's adjust irq_window_exits accounting.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Impact: build fix
fix:
kernel/trace/Kconfig:42:error: found recursive dependency: TRACING ->
TRACEPOINTS -> MARKERS -> KVM_TRACE -> RELAY -> KMEMTRACE -> TRACING
markers is a facility that should be selected - not depended on
by an interactive Kconfig entry.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It is possible for a shadow page to have a parent link
pointing to a freed page. When zapping a high level table,
kvm_mmu_page_unlink_children fails to remove the parent_pte link.
For that to happen, the child must be unreachable via the shadow
tree, which can happen in shadow_walk_entry if the guest pte was
modified in between walk() and fetch(). Remove the parent pte
reference in such case.
Possible cause for oops in bug #2217430.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
During page sync, if a pagetable contains a self referencing pte (that
points to the pagetable), the corresponding spte may be marked as
writable even though all mappings are supposed to be write protected.
Fix by clearing page unsync before syncing individual sptes.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If an interrupt cannot be injected for some reason (say, page fault
when fetching the IDT descriptor), the interrupt is marked for
reinjection. However, if an NMI is queued at this time, the NMI
will be injected instead and the NMI will be lost.
Fix by deferring the NMI injection until the interrupt has been
injected successfully.
Analyzed by Jan Kiszka.
Signed-off-by: Avi Kivity <avi@redhat.com>
There is a potential issue that, when guest using pagetable without vmexit when
EPT enabled, guest would use PAT/PCD/PWT bits to index PAT msr for it's memory,
which would be inconsistent with host side and would cause host MCE due to
inconsistent cache attribute.
The patch set IGMT bit in EPT entry to ignore guest PAT and use WB as default
memory type to protect host (notice that all memory mapped by KVM should be WB).
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The page fault path can use two rmap_desc structures, if:
- walk_addr's dirty pte update allocates one rmap_desc.
- mmu_lock is dropped, sptes are zapped resulting in rmap_desc being
freed.
- fetch->mmu_set_spte allocates another rmap_desc.
Increase to 4 for safety.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Every call of kvm_set_irq() should offer an irq_source_id, which is
allocated by kvm_request_irq_source_id(). Based on irq_source_id, we
identify the irq source and implement logical OR for shared level
interrupts.
The allocated irq_source_id can be freed by kvm_free_irq_source_id().
Currently, we support at most sizeof(unsigned long) different irq sources.
[Amit: - rebase to kvm.git HEAD
- move definition of KVM_USERSPACE_IRQ_SOURCE_ID to common file
- move kvm_request_irq_source_id to the update_irq ioctl]
[Xiantao: - Add kvm/ia64 stuff and make it work for kvm/ia64 guests]
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The pvmmu TLB flush handler should request a root sync, similarly to
a native read-write CR3.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
* 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (134 commits)
KVM: ia64: Add intel iommu support for guests.
KVM: ia64: add directed mmio range support for kvm guests
KVM: ia64: Make pmt table be able to hold physical mmio entries.
KVM: Move irqchip_in_kernel() from ioapic.h to irq.h
KVM: Separate irq ack notification out of arch/x86/kvm/irq.c
KVM: Change is_mmio_pfn to kvm_is_mmio_pfn, and make it common for all archs
KVM: Move device assignment logic to common code
KVM: Device Assignment: Move vtd.c from arch/x86/kvm/ to virt/kvm/
KVM: VMX: enable invlpg exiting if EPT is disabled
KVM: x86: Silence various LAPIC-related host kernel messages
KVM: Device Assignment: Map mmio pages into VT-d page table
KVM: PIC: enhance IPI avoidance
KVM: MMU: add "oos_shadow" parameter to disable oos
KVM: MMU: speed up mmu_unsync_walk
KVM: MMU: out of sync shadow core
KVM: MMU: mmu_convert_notrap helper
KVM: MMU: awareness of new kvm_mmu_zap_page behaviour
KVM: MMU: mmu_parent_walk
KVM: x86: trap invlpg
KVM: MMU: sync roots on mmu reload
...
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Moving irq ack notification logic as common, and make
it shared with ia64 side.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
To share with other archs, this patch moves device assignment
logic to common parts.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
KVM-x86 dumps a lot of debug messages that have no meaning for normal
operation:
- INIT de-assertion is ignored
- SIPIs are sent and received
- APIC writes are unaligned or < 4 byte long
(Windows Server 2003 triggers this on SMP)
Degrade them to true debug messages, keeping the host kernel log clean
for real problems.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Assigned device could DMA to mmio pages, so also need to map mmio pages
into VT-d page table.
Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The PIC code makes little effort to avoid kvm_vcpu_kick(), resulting in
unnecessary guest exits in some conditions.
For example, if the timer interrupt is routed through the IOAPIC, IRR
for IRQ 0 will get set but not cleared, since the APIC is handling the
acks.
This means that everytime an interrupt < 16 is triggered, the priority
logic will find IRQ0 pending and send an IPI to vcpu0 (in case IRQ0 is
not masked, which is Linux's case).
Introduce a new variable isr_ack to represent the IRQ's for which the
guest has been signalled / cleared the ISR. Use it to avoid more than
one IPI per trigger-ack cycle, in addition to the avoidance when ISR is
set in get_priority().
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Cache the unsynced children information in a per-page bitmap.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Allow guest pagetables to go out of sync. Instead of emulating write
accesses to guest pagetables, or unshadowing them, we un-write-protect
the page table and allow the guest to modify it at will. We rely on
invlpg executions to synchronize individual ptes, and will synchronize
the entire pagetable on tlb flushes.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Need to convert shadow_notrap_nonpresent -> shadow_trap_nonpresent when
unsyncing pages.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_mmu_zap_page will soon zap the unsynced children of a page. Restart
list walk in such case.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduce a function to walk all parents of a given page, invoking a handler.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
With pages out of sync invlpg needs to be trapped. For now simply nuke
the entry.
Untested on AMD.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Examine guest pagetable and bring the shadow back in sync. Caller is responsible
for local TLB flush before re-entering guest mode.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
There is not much point in write protecting large mappings. This
can only happen when a page is shadowed during the window between
is_largepage_backed and mmu_lock acquision. Zap the entry instead, so
the next pagefault will find a shadowed page via is_largepage_backed and
fallback to 4k translations.
Simplifies out of sync shadow.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Split the spte entry creation code into a new set_spte function.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
It is necessary to flush all TLB's when a large spte entry is
overwritten with a normal page directory pointer.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The vcpu should process pending SIPI message before entering guest mode again.
kvm_arch_vcpu_runnable() returns true if the vcpu is in SIPI state, so
we can't call it here.
Signed-off-by: Gleb Natapov <gleb@qumranet.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Noticed by sparse:
arch/x86/kvm/x86.c:3591:5: warning: symbol 'kvm_load_realmode_segment' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Convert gfn_to_pfn to use get_user_pages_fast, which can do lockless
pagetable lookups on x86. Kernel compilation on 4-way guest is 3.7%
faster on VMX.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When an IRQ allocation fails, we free up the device structures and
disable the device so that we can unregister the device in the
userspace and not expose it to the guest at all.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Based on a patch by: Kay, Allen M <allen.m.kay@intel.com>
This patch enables PCI device assignment based on VT-d support.
When a device is assigned to the guest, the guest memory is pinned and
the mapping is updated in the VT-d IOMMU.
[Amit: Expose KVM_CAP_IOMMU so we can check if an IOMMU is present
and also control enable/disable from userspace]
Signed-off-by: Kay, Allen M <allen.m.kay@intel.com>
Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Ben-Ami Yassour <benami@il.ibm.com>
Signed-off-by: Amit Shah <amit.shah@qumranet.com>
Acked-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
For instruction 'and al,imm' we use DstAcc instead of doing
the emulation directly into the instruction's opcode.
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Add decode entries for these opcodes; execution is already implemented.
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Add DstAcc operand type. That means that there are 4 bits now for
DstMask.
"In the good old days cpus would have only one register that was able to
fully participate in arithmetic operations, typically called A for
Accumulator. The x86 retains this tradition by having special, shorter
encodings for the A register (like the cmp opcode), and even some
instructions that only operate on A (like mul).
SrcAcc and DstAcc would accommodate these instructions by decoding A
into the corresponding 'struct operand'."
-- Avi Kivity
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
jmp r/m64 doesn't require the rex.w prefix to indicate the operand size
is 64 bits. Set the Stack attribute (even though it doesn't involve the
stack, really) to indicate this.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Commit 1c0f4f5011829dac96347b5f84ba37c2252e1e08 left a useless access
of VM_ENTRY_INTR_INFO_FIELD in vmx_intr_assist behind. Clean this up.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Since "KVM: x86: do not execute halted vcpus", HLT by vcpu0 before system
reset by the IO thread will hang the guest.
Mark vcpu as runnable in such case.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Offline or uninitialized vcpu's can be executed if requested to perform
userspace work.
Follow Avi's suggestion to handle halted vcpu's in the main loop,
simplifying kvm_emulate_halt(). Introduce a new vcpu->requests bit to
indicate events that promote state from halted to running.
Also standardize vcpu wake sites.
Signed-off-by: Marcelo Tosatti <mtosatti <at> redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The patch adds in/out instructions to the x86 emulator.
The instruction was encountered while running the BIOS while using
the invalid guest state emulation patch.
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
EPT is 4 level by default in 32pae(48 bits), but the addr parameter
of kvm_shadow_walk->entry() only accept unsigned long as virtual
address, which is 32bit in 32pae. This result in SHADOW_PT_INDEX()
overflow when try to fetch level 4 index.
Fix it by extend kvm_shadow_walk->entry() to accept 64bit addr in
parameter.
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This adds the std and cld instructions to the emulator.
Encountered while running the BIOS with invalid guest
state emulation enabled.
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Currently KVM implements MC0-MC4_MISC read support. When booting Linux this
results in KVM warnings in the kernel log when the guest tries to read
MC5_MISC. Fix this warnings with this patch.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The accessed bit was accidentally turned on in a random flag word, rather
than, the spte itself, which was lucky, since it used the non-EPT compatible
PT_ACCESSED_MASK.
Fix by turning the bit on in the spte and changing it to use the portable
accessed mask.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Otherwise, the cpu may allow writes to the tracked pages, and we lose
some display bits or fail to migrate correctly.
Signed-off-by: Avi Kivity <avi@qumranet.com>
The emulator only supported one instance of mov r, imm instruction
(opcode 0xb8), this adds the rest of these instructions.
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
We currently walk the shadow page tables in two places: direct map (for
real mode and two dimensional paging) and paging mode shadow. Since we
anticipate requiring a third walk (for invlpg), it makes sense to have
a generic facility for shadow walk.
This patch adds such a shadow walker, walks the page tables and calls a
method for every spte encountered. The method can examine the spte,
modify it, or even instantiate it. The walk can be aborted by returning
nonzero from the method.
Signed-off-by: Avi Kivity <avi@qumranet.com>
In all cases the shadow root level is available in mmu.shadow_root_level,
so there is no need to pass it as a parameter.
Signed-off-by: Avi Kivity <avi@qumranet.com>
The two paths are equivalent except for one argument, which is already
available. Merge the two codepaths.
Signed-off-by: Avi Kivity <avi@qumranet.com>
sparse says:
arch/x86/kvm/x86.c:107:32: warning: symbol 'kvm_find_assigned_dev' was not declared. Should it be static?
arch/x86/kvm/i8254.c:225:6: warning: symbol 'kvm_pit_ack_irq' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch modifies mode switching and vmentry function in order to
drive invalid guest state emulation.
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This adds the invalid guest state handler function which invokes the x86
emulator until getting the guest to a VMX-friendly state.
[avi: leave atomic context if scheduling]
[guillaume: return to atomic context correctly]
Signed-off-by: Laurent Vivier <laurent.vivier@bull.net>
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The patch adds the module parameter required to enable emulating invalid
guest state, as well as the emulation_required flag used to drive
emulation whenever needed.
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch adds functions to check whether guest state is VMX compliant.
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Even though we don't share irqs at the moment, we should ensure
regular user processes don't try to allocate system resources.
We check for capability to access IO devices (CAP_SYS_RAWIO) before
we request_irq on behalf of the guest.
Noticed by Avi.
Signed-off-by: Amit Shah <amit.shah@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Spurious acks can be generated, for example if the PIC is being reset.
Handle those acks gracefully rather than flooding the log with warnings.
Signed-off-by: Avi Kivity <avi@qumranet.com>
