Commit Graph

56 Commits

Author SHA1 Message Date
Ingo Molnar
bfefb7a0c6 Merge branch 'linus' into x86/urgent
Merge reason: Bring in changes that the next patch will depend on.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-20 20:25:03 +02:00
Felipe Contreras
878f4f533e x86: Trivial whitespace cleanups
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alok N Kataria <akataria@vmware.com>
Cc: "Tan Wei Chong" <wei.chong.tan@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Bob Moore <robert.moore@intel.com>
LKML-Reference: <1253137123-18047-2-git-send-email-felipe.contreras@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-20 20:18:57 +02:00
Linus Torvalds
78f28b7c55 Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits)
  x86: Move get/set_wallclock to x86_platform_ops
  x86: platform: Fix section annotations
  x86: apic namespace cleanup
  x86: Distangle ioapic and i8259
  x86: Add Moorestown early detection
  x86: Add hardware_subarch ID for Moorestown
  x86: Add early platform detection
  x86: Move tsc_init to late_time_init
  x86: Move tsc_calibration to x86_init_ops
  x86: Replace the now identical time_32/64.c by time.c
  x86: time_32/64.c unify profile_pc
  x86: Move calibrate_cpu to tsc.c
  x86: Make timer setup and global variables the same in time_32/64.c
  x86: Remove mca bus ifdef from timer interrupt
  x86: Simplify timer_ack magic in time_32.c
  x86: Prepare unification of time_32/64.c
  x86: Remove do_timer hook
  x86: Add timer_init to x86_init_ops
  x86: Move percpu clockevents setup to x86_init_ops
  x86: Move xen_post_allocator_init into xen_pagetable_setup_done
  ...

Fix up conflicts in arch/x86/include/asm/io_apic.h
2009-09-18 14:05:47 -07:00
Thomas Gleixner
2d826404f0 x86: Move tsc_calibration to x86_init_ops
TSC calibration is modified by the vmware hypervisor and paravirt by
separate means. Moorestown wants to add its own calibration routine as
well. So make calibrate_tsc a proper x86_init_ops function and
override it by paravirt or by the early setup of the vmware
hypervisor.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-31 09:35:47 +02:00
Thomas Gleixner
08047c4f17 x86: Move calibrate_cpu to tsc.c
Move the code where it's only user is. Also we need to look whether
this hardwired hackery might interfere with perfcounters.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-31 09:35:46 +02:00
Thomas Gleixner
845b3944bb x86: Add timer_init to x86_init_ops
The timer init code is convoluted with several quirks and the paravirt
timer chooser. Figuring out which code path is actually taken is not
for the faint hearted.

Move the numaq TSC quirk to tsc_pre_init x86_init_ops function and
replace the paravirt time chooser and the remaining x86 quirk with a
simple x86_init_ops function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-31 09:35:46 +02:00
Thomas Gleixner
7285dd7fd3 clocksource: Resolve cpu hotplug dead lock with TSC unstable
Martin Schwidefsky analyzed it:
To register a clocksource the clocksource_mutex is acquired and if
necessary timekeeping_notify is called to install the clocksource as
the timekeeper clock. timekeeping_notify uses stop_machine which needs
to take cpu_add_remove_lock mutex.
Starting a new cpu is done with the cpu_add_remove_lock mutex held.
native_cpu_up checks the tsc of the new cpu and if the tsc is no good
clocksource_change_rating is called. Which needs the clocksource_mutex
and the deadlock is complete.

The solution is to replace the TSC via the clocksource watchdog
mechanism. Mark the TSC as unstable and schedule the watchdog work so
it gets removed in the watchdog thread context.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: John Stultz <johnstul@us.ibm.com>
2009-08-28 20:25:24 +02:00
Martin Schwidefsky
1be3967948 timekeeping: Move reset of cycle_last for tsc clocksource to tsc
change_clocksource resets the cycle_last value to zero then sets it to
a value read from the clocksource. The reset to zero is required only
for the TSC clocksource to make the read_tsc function work after a
resume. The reason is that the TSC read function uses cycle_last to
detect backwards going TSCs. In the resume case cycle_last contains
the TSC value from the last update before the suspend. On resume the
TSC starts counting from 0 again and would trip over the cycle_last
comparison.

This is subtle and surprising. Move the reset to a resume function in
the tsc code.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134808.142191175@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15 10:55:45 +02:00
Linus Torvalds
b6e61eef4f x86: Fix serialization in pit_expect_msb()
Wei Chong Tan reported a fast-PIT-calibration corner-case:

| pit_expect_msb() is vulnerable to SMI disturbance corner case
| in some platforms which causes /proc/cpuinfo to show wrong
| CPU MHz value when quick_pit_calibrate() jumps to success
| section.

I think that the real issue isn't even an SMI - but the fact
that in the very last iteration of the loop, there's no
serializing instruction _after_ the last 'rdtsc'. So even in
the absense of SMI's, we do have a situation where the cycle
counter was read without proper serialization.

The last check should be done outside the outer loop, since
_inside_ the outer loop, we'll be testing that the PIT has
the right MSB value has the right value in the next iteration.

So only the _last_ iteration is special, because that's the one
that will not check the PIT MSB value any more, and because the
final 'get_cycles()' isn't serialized.

In other words:

 - I'd like to move the PIT MSB check to after the last
   iteration, rather than in every iteration

 - I think we should comment on the fact that it's also a
   serializing instruction and so 'fences in' the TSC read.

Here's a suggested replacement.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: "Tan, Wei Chong" <wei.chong.tan@intel.com>
Tested-by: "Tan, Wei Chong" <wei.chong.tan@intel.com>
LKML-Reference: <B28277FD4E0F9247A3D55704C440A140D5D683F3@pgsmsx504.gar.corp.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-10 19:56:57 +02:00
Linus Torvalds
1eb51c33b2 Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix out of scope variable access in sched_slice()
  sched: Hide runqueues from direct refer at source code level
  sched: Remove unneeded __ref tag
  sched, x86: Fix cpufreq + sched_clock() TSC scaling
2009-06-20 10:57:40 -07:00
Linus Torvalds
c30938d59e Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] cpumask: new cpumask operators for arch/x86/kernel/cpu/cpufreq/powernow-k8.c
  [CPUFREQ] cpumask: avoid playing with cpus_allowed in powernow-k8.c
  [CPUFREQ] cpumask: avoid cpumask games in arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
  [CPUFREQ] cpumask: avoid playing with cpus_allowed in speedstep-ich.c
  [CPUFREQ] powernow-k8: get drv data for correct CPU
  [CPUFREQ] powernow-k8: read P-state from HW
  [CPUFREQ] reduce scope of ACPI_PSS_BIOS_BUG_MSG[]
  [CPUFREQ] Clean up convoluted code in arch/x86/kernel/tsc.c:time_cpufreq_notifier()
  [CPUFREQ] minor correction to cpu-freq documentation
  [CPUFREQ] powernow-k8.c: mess cleanup
  [CPUFREQ] Only set sampling_rate_max deprecated, sampling_rate_min is useful
  [CPUFREQ] powernow-k8: Set transition latency to 1 if ACPI tables export 0
  [CPUFREQ] ondemand: Uncouple minimal sampling rate from HZ in NO_HZ case
2009-06-17 09:51:50 -07:00
Peter Zijlstra
84599f8a59 sched, x86: Fix cpufreq + sched_clock() TSC scaling
For freqency dependent TSCs we only scale the cycles, we do not account
for the discrepancy in absolute value.

Our current formula is: time = cycles * mult

(where mult is a function of the cpu-speed on variable tsc machines)

Suppose our current cycle count is 10, and we have a multiplier of 5,
then our time value would end up being 50.

Now cpufreq comes along and changes the multiplier to say 3 or 7,
which would result in our time being resp. 30 or 70.

That means that we can observe random jumps in the time value due to
frequency changes in both fwd and bwd direction.

So what this patch does is change the formula to:

  time = cycles * frequency + offset

And we calculate offset so that time_before == time_after, thereby
ridding us of these jumps in time.

[ Impact: fix/reduce sched_clock() jumps across frequency changing events ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Chucked-on-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-06-17 16:03:54 +02:00
Arnd Bergmann
08604bd993 time: move PIT_TICK_RATE to linux/timex.h
PIT_TICK_RATE is currently defined in four architectures, but in three
different places.  While linux/timex.h is not the perfect place for it, it
is still a reasonable replacement for those drivers that traditionally use
asm/timex.h to get CLOCK_TICK_RATE and expect it to be the PIT frequency.

Note that for Alpha, the actual value changed from 1193182UL to 1193180UL.
 This is unlikely to make a difference, and probably can only improve
accuracy.  There was a discussion on the correct value of CLOCK_TICK_RATE
a few years ago, after which every existing instance was getting changed
to 1193182.  According to the specification, it should be
1193181.818181...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Len Brown <lenb@kernel.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:27 -07:00
Dave Jones
931db6a32d [CPUFREQ] Clean up convoluted code in arch/x86/kernel/tsc.c:time_cpufreq_notifier()
Christoph Hellwig noticed the following potential uninitialised use:

 > arch/x86/kernel/tsc.c: In function 'time_cpufreq_notifier':
 > arch/x86/kernel/tsc.c:634: warning: 'dummy' may be used uninitialized in this function
 >
 > where we do have CONFIG_SMP set, freq->flags & CPUFREQ_CONST_LOOPS is
 > true and ref_freq is false.

It seems plausable, though the circumstances for hitting it are really low.
Nearly all SMP capable cpufreq drivers set CPUFREQ_CONST_LOOPS.
powernow-k8 is really the only exception. The older CPUs were typically
only ever UP. (powernow-k7 never supported SMP for eg)

It's worth fixing regardless, as it cleans up the code.

Fix possible uninitialized use of dummy, by just removing it,
and making the setting of lpj more obvious.

Signed-off-by: Dave Jones <davej@redhat.com>
2009-06-15 11:49:42 -04:00
Linus Torvalds
595dc54a1d Merge branch 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: move rdtsc_barrier() into the TSC vread method
2009-06-10 16:15:59 -07:00
Linus Torvalds
7dc3ca39cb Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, nmi: Use predefined numbers instead of hardcoded one
  x86: asm/processor.h: remove double declaration
  x86, mtrr: replace MTRRdefType_MSR with msr-index's MSR_MTRRdefType
  x86, mtrr: replace MTRRfix4K_C0000_MSR with msr-index's MSR_MTRRfix4K_C0000
  x86, mtrr: remove mtrr MSRs double declaration
  x86, mtrr: replace MTRRfix16K_80000_MSR with msr-index's MSR_MTRRfix16K_80000
  x86, mtrr: replace MTRRfix64K_00000_MSR with msr-index's MSR_MTRRfix64K_00000
  x86, mtrr: replace MTRRcap_MSR with msr-index's MSR_MTRRcap
  x86: mce: remove duplicated #include
  x86: msr-index.h remove duplicate MSR C001_0015 declaration
  x86: clean up arch/x86/kernel/tsc_sync.c a bit
  x86: use symbolic name for VM86_SIGNAL when used as vm86 default return
  x86: added 'ifndef _ASM_X86_IOMAP_H' to iomap.h
  x86: avoid multiple declaration of kstack_depth_to_print
  x86: vdso/vma.c declare vdso_enabled and arch_setup_additional_pages before they get used
  x86: clean up declarations and variables
  x86: apic/x2apic_cluster.c x86_cpu_to_logical_apicid should be static
  x86 early quirks: eliminate unused function
2009-06-10 15:49:36 -07:00
Petr Tesarik
7d96fd41ca x86: move rdtsc_barrier() into the TSC vread method
The *fence instructions were moved to vsyscall_64.c by commit
cb9e35dce9.  But this breaks the
vDSO, because vread methods are also called from there.

Besides, the synchronization might be unnecessary for other
time sources than TSC.

[ Impact: fix potential time warp in VDSO ]

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
LKML-Reference: <9d0ea9ea0f866bdc1f4d76831221ae117f11ea67.1243241859.git.ptesarik@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
2009-05-28 14:15:54 +02:00
Magnus Damm
8e19608e8b clocksource: pass clocksource to read() callback
Pass clocksource pointer to the read() callback for clocksources.  This
allows us to share the callback between multiple instances.

[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 13:41:47 -07:00
Jaswinder Singh Rajput
2c1b284e4f x86: clean up declarations and variables
Impact: cleanup, no code changed

 - syscalls.h       update declarations due to unifications
 - irq.c            declare smp_generic_interrupt() before it gets used
 - process.c        declare sys_fork() and sys_vfork() before they get used
 - tsc.c            rename tsc_khz shadowed variable
 - apic/probe_32.c  declare apic_default before it gets used
 - apic/nmi.c       prev_nmi_count should be unsigned
 - apic/io_apic.c   declare smp_irq_move_cleanup_interrupt() before it gets used
 - mm/init.c        declare direct_gbpages and free_initrd_mem before they get used

Signed-off-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12 15:20:16 +02:00
Ingo Molnar
6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Linus Torvalds
831576fe40 Merge branch 'sched-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (46 commits)
  sched: Add comments to find_busiest_group() function
  sched: Refactor the power savings balance code
  sched: Optimize the !power_savings_balance during fbg()
  sched: Create a helper function to calculate imbalance
  sched: Create helper to calculate small_imbalance in fbg()
  sched: Create a helper function to calculate sched_domain stats for fbg()
  sched: Define structure to store the sched_domain statistics for fbg()
  sched: Create a helper function to calculate sched_group stats for fbg()
  sched: Define structure to store the sched_group statistics for fbg()
  sched: Fix indentations in find_busiest_group() using gotos
  sched: Simple helper functions for find_busiest_group()
  sched: remove unused fields from struct rq
  sched: jiffies not printed per CPU
  sched: small optimisation of can_migrate_task()
  sched: fix typos in documentation
  sched: add avg_overlap decay
  x86, sched_clock(): mark variables read-mostly
  sched: optimize ttwu vs group scheduling
  sched: TIF_NEED_RESCHED -> need_reshed() cleanup
  sched: don't rebalance if attached on NULL domain
  ...
2009-03-26 16:05:01 -07:00
Linus Torvalds
ada19a31a9 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: (35 commits)
  [CPUFREQ] Prevent p4-clockmod from auto-binding to the ondemand governor.
  [CPUFREQ] Make cpufreq-nforce2 less obnoxious
  [CPUFREQ] p4-clockmod reports wrong frequency.
  [CPUFREQ] powernow-k8: Use a common exit path.
  [CPUFREQ] Change link order of x86 cpufreq modules
  [CPUFREQ] conservative: remove 10x from def_sampling_rate
  [CPUFREQ] conservative: fixup governor to function more like ondemand logic
  [CPUFREQ] conservative: fix dbs_cpufreq_notifier so freq is not locked
  [CPUFREQ] conservative: amend author's email address
  [CPUFREQ] Use swap() in longhaul.c
  [CPUFREQ] checkpatch cleanups for acpi-cpufreq
  [CPUFREQ] powernow-k8: Only print error message once, not per core.
  [CPUFREQ] ondemand/conservative: sanitize sampling_rate restrictions
  [CPUFREQ] ondemand/conservative: deprecate sampling_rate{min,max}
  [CPUFREQ] powernow-k8: Always compile powernow-k8 driver with ACPI support
  [CPUFREQ] Introduce /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_transition_latency
  [CPUFREQ] checkpatch cleanups for powernow-k8
  [CPUFREQ] checkpatch cleanups for ondemand governor.
  [CPUFREQ] checkpatch cleanups for powernow-k7
  [CPUFREQ] checkpatch cleanups for speedstep related drivers.
  ...
2009-03-26 11:04:08 -07:00
Ingo Molnar
37ba317c9e Merge branches 'sched/cleanups' and 'linus' into sched/core 2009-03-18 09:57:02 +01:00
Linus Torvalds
9e8912e04e Fast TSC calibration: calculate proper frequency error bounds
In order for ntpd to correctly synchronize the clocks, the frequency of
the system clock must not be off by more than 500 ppm (or, put another
way, 1:2000), or ntpd will end up giving up on trying to synchronize
properly, and ends up reseting the clock in jumps instead.

The fast TSC PIT calibration sometimes failed this test - it was
assuming that the PIT reads always took about one microsecond each (2us
for the two reads to get a 16-bit timer), and that calibrating TSC to
the PIT over 15ms should thus be sufficient to get much closer than
500ppm (max 2us error on both sides giving 4us over 15ms: a 270 ppm
error value).

However, that assumption does not always hold: apparently some hardware
is either very much slower at reading the PIT registers, or there was
other noise causing at least one machine to get 700+ ppm errors.

So instead of using a fixed 15ms timing loop, this changes the fast PIT
calibration to read the TSC delta over the individual PIT timer reads,
and use the result to calculate the error bars on the PIT read timing
properly.  We then successfully calibrate the TSC only if the maximum
error bars fall below 500ppm.

In the process, we also relax the timing to allow up to 25ms for the
calibration, although it can happen much faster depending on hardware.

Reported-and-tested-by: Jesper Krogh <jesper@krogh.cc>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-17 08:13:17 -07:00
Linus Torvalds
a6a80e1d8c Fix potential fast PIT TSC calibration startup glitch
During bootup, when we reprogram the PIT (programmable interval timer)
to start counting down from 0xffff in order to use it for the fast TSC
calibration, we should also make sure to delay a bit afterwards to allow
the PIT hardware to actually start counting with the new value.

That will happens at the next CLK pulse (1.193182 MHz), so the easiest
way to do that is to just wait at least one microsecond after
programming the new PIT counter value.  We do that by just reading the
counter value back once - which will take about 2us on PC hardware.

Reported-and-tested-by: john stultz <johnstul@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-17 07:58:26 -07:00
Ingo Molnar
f24ade3a33 x86, sched_clock(): mark variables read-mostly
Impact: micro-optimization

There's a number of variables in the sched_clock() path that are
in .data/.bss - but not marked __read_mostly. This creates the
danger of accidental false cacheline sharing with some other,
write-often variable.

So mark them __read_mostly.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-10 19:02:30 +01:00
Matthias-Christian Ott
199785eac8 [CPUFREQ] p4-clockmod reports wrong frequency.
http://bugzilla.kernel.org/show_bug.cgi?id=10968

[ Updated for current tree, and fixed compile failure
  when p4-clockmod was built modular -- davej]

From: Matthias-Christian Ott <ott@mirix.org>
Signed-off-by: Dominik Brodowski <linux@brodo.de>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:32 -05:00
Ingo Molnar
3e5095d152 x86: replace CONFIG_X86_SMP with CONFIG_SMP
The x86/Voyager subarch used to have this distinction between
 'x86 SMP support' and 'Voyager SMP support':

 config X86_SMP
	bool
	depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)

This is a pointless distinction - Voyager can (and already does) use
smp_ops to implement various SMP quirks it has - and it can be extended
more to cover all the specialities of Voyager.

So remove this complication in the Kconfig space.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29 14:17:00 +01:00
Ingo Molnar
fa623d1b02 Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/detect-hyper', 'x86/doc', 'x86/dumpstack', 'x86/early-printk', 'x86/fpu', 'x86/idle', 'x86/io', 'x86/memory-corruption-check', 'x86/microcode', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/pat2', 'x86/pci-ioapic-boot-irq-quirks', 'x86/ptrace', 'x86/quirks', 'x86/reboot', 'x86/setup-memory', 'x86/signal', 'x86/sparse-fixes', 'x86/time', 'x86/uv' and 'x86/xen' into x86/core 2008-12-23 16:27:23 +01:00
Ingo Molnar
7cbaef9c83 sched: optimize sched_clock() a bit
sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
variant of __cycles_2_ns().

Most of the time sched_clock() is called with irqs disabled already.
The few places that call it with irqs enabled need to be updated.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-08 17:05:38 +01:00
Alok Kataria
70de9a9704 x86: don't use tsc_khz to calculate lpj if notsc is passed
Impact: fix udelay when "notsc" boot parameter is passed

With notsc passed on commandline, tsc may not be used for
udelays, make sure that we do not use tsc_khz to calculate
the lpj value in such cases.

Reported-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-04 09:55:26 +01:00
Alok Kataria
395628ef4e x86: Skip verification by the watchdog for TSC clocksource.
Impact: Changes timekeeping on Vmware (or with tsc=reliable).

This is achieved by resetting the CLOCKSOURCE_MUST_VERIFY flag.

We add a tsc=reliable commandline option to enable this.
This enables legacy hardware without HPET, LAPIC, or ACPI timers
to enter high-resolution timer mode.

Along with that have extended this to be used in virtualization environement
too. Now we also set this flag if the X86_FEATURE_TSC_RELIABLE bit is set.

This is important since there is a wrap-around problem with the acpi_pm timer.
The acpi_pm counter is just 24bits and this can overflow in ~4 seconds. With
the NO_HZ kernels in virtualized environment, there can be situations when
the guest is descheduled for longer duration, as a result we may miss the wrap
of the acpi counter. When TSC is used as a clocksource and acpi_pm timer is
being used as the watchdog clocksource this error in acpi_pm results in TSC
being marked as unstable, and essentially results in time dropping in chunks
of 4 seconds whenever this wrap is missed. Since the virtualized TSC is
reliable on VMware, we should always use the TSCs clocksource on VMware, so
we skip the verfication at runtime, by checking for the feature bit.

Since we reset the flag for mgeode systems too, i have combined
the mgeode case with the feature bit check.

Signed-off-by: Jeff Hansen <jhansen@cardaccess-inc.com>
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Dan Hecht <dhecht@vmware.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-01 18:59:03 -07:00
Alok Kataria
88b094fb8d x86: Hypervisor detection and get tsc_freq from hypervisor
Impact: Changes timebase calibration on Vmware.

v3->v2 : Abstract the hypervisor detection and feature (tsc_freq) request
	 behind a hypervisor.c file
v2->v1 : Add a x86_hyper_vendor field to the cpuinfo_x86 structure.
	 This avoids multiple calls to the hypervisor detection function.

This patch adds function to detect if we are running under VMware.
The current way to check if we are on VMware is following,
#  check if "hypervisor present bit" is set, if so read the 0x40000000
   cpuid leaf and check for "VMwareVMware" signature.
#  if the above fails, check the DMI vendors name for "VMware" string
   if we find one we query the VMware hypervisor port to check if we are
   under VMware.

The DMI + "VMware hypervisor port check" is needed for older VMware products,
which don't implement the hypervisor signature cpuid leaf.
Also note that since we are checking for the DMI signature the hypervisor
port should never be accessed on native hardware.

This patch also adds a hypervisor_get_tsc_freq function, instead of
calibrating the frequency which can be error prone in virtualized
environment, we ask the hypervisor for it. We get the frequency from
the hypervisor by accessing the hypervisor port if we are running on VMware.
Other hypervisors too can add code to the generic routine to get frequency on
their platform.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Dan Hecht <dhecht@vmware.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-01 18:57:08 -07:00
James Bottomley
017d9d20d8 x86: use CONFIG_X86_SMP instead of CONFIG_SMP
Impact: fix x86/Voyager boot

CONFIG_SMP is used for features which work on *all* x86 boxes.
CONFIG_X86_SMP is used for standard PC like x86 boxes (for things like
multi core and apics)

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30 22:53:10 +01:00
Ingo Molnar
e496e3d645 Merge branches 'x86/alternatives', 'x86/cleanups', 'x86/commandline', 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/doc', 'x86/exports', 'x86/fpu', 'x86/gart', 'x86/idle', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/oprofile', 'x86/paravirt', 'x86/reboot', 'x86/sparse-fixes', 'x86/tsc', 'x86/urgent' and 'x86/vmalloc' into x86-v28-for-linus-phase1 2008-10-06 18:17:07 +02:00
Ingo Molnar
5df4551551 x86, tsc calibration: fix
my brown paperbag day ...

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06 23:55:40 +02:00
Ingo Molnar
4156e9a8ef x86: quick TSC calibration, improve
- make sure the final TSC timestamp is reliable too

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-04 23:21:57 +02:00
Linus Torvalds
6ac40ed041 x86: quick TSC calibration
Introduce a fast TSC-calibration method on sane hardware.

It only uses 17920 PIT timer ticks to calibrate the TSC, plus 256 ticks on
each side to make sure the TSC values were very close to the tick, so the
whole calibration takes 15ms. Yet, despite only takign 15ms,
we can actually give pretty stringent guarantees of accuracy:

 - the code requires that we hit each 256-counter block at least 50 times,
   so the TSC error is basically at *MOST* just a few PIT cycles off in
   any direction. In practice, it's going to be about one microseconds
   off (which is how long it takes to read the counter)

 - so over 17920 PIT cycles, we can pretty much guarantee that the
   calibration error is less than one half of a percent.

My testing bears this out: on my machine, the quick-calibration reports
2934.085kHz, while the slow one reports 2933.415.

Yes, the slower calibration is still more precise. For me, the slow
calibration is stable to within about one hundreth of a percent, so it's
(at a guess) roughly an order-and-a-half of magnitude more precise. The
longer you wait, the more precise you can be.

However, the nice thing about the fast TSC PIT synchronization is that
it's pretty much _guaranteed_ to give that 0.5% precision, and fail
gracefully (and very quickly) if it doesn't get it. And it really is
fairly simple (even if there's a lot of _details_ there, and I didn't get
all of those right ont he first try or even the second ;)

The patch says "110 insertions", but 63 of those new lines are actually
comments.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tsc.c |  111 ++++++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 110 insertions(+), 1 deletions(-)
2008-09-04 22:54:50 +02:00
Thomas Gleixner
a977c40095 x86: TSC make the calibration loop smarter
The last changes made the calibration loop 250ms long which is far
too much. Try to do that more clever.

Experiments have shown that using a 10ms delay for the PIT based calibration
gives us a good enough value. If we have a reference (HPET/PMTIMER) and the
result of the PIT and the reference is close enough, then we can break out of
the calibration loop on a match right away and use the reference value.

Otherwise we just loop 3 times and decide then, which value to take.

One caveat is that for virtualized environments the PIT calibration often does
not work at all and I found out that 10us is a bit too short as well for the
reference to give a sane result. The solution here is to make the last loop
longer when the first two PIT calibrations failed.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-04 17:35:35 +02:00
Thomas Gleixner
827014be05 x86: TSC: use one set of reference variables
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-04 17:35:34 +02:00
Thomas Gleixner
d683ef7afe x86: TSC: separate hpet/pmtimer calculation out
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-04 17:35:33 +02:00
Thomas Gleixner
cce3e05724 x86: TSC: define the PIT latch value separate
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-04 17:35:33 +02:00
Alok N Kataria
de014d6176 x86: Change warning message in TSC calibration.
When calibration against PIT fails, the warning that we print is misleading.
In a virtualized environment the VM may get descheduled while calibration
or, the check in PIT calibration may fail due to other virtualization
overheads.

The warning message explicitly assumes that calibration failed due to SMI's
which may not be the case. Change that to something proper.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-03 20:10:37 -07:00
Linus Torvalds
ec0c15afb4 Split up PIT part of TSC calibration from native_calibrate_tsc
The TSC calibration function is still very complicated, but this makes
it at least a little bit less so by moving the PIT part out into a
helper function of its own.

Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-03 07:30:13 -07:00
Thomas Gleixner
fbb16e2438 [x86] Fix TSC calibration issues
Larry Finger reported at http://lkml.org/lkml/2008/9/1/90:
An ancient laptop of mine started throwing errors from b43legacy when
I started using 2.6.27 on it. This has been bisected to commit bfc0f59
"x86: merge tsc calibration".

The unification of the TSC code adopted mostly the 64bit code, which
prefers PMTIMER/HPET over the PIT calibration.

Larrys system has an AMD K6 CPU. Such systems are known to have
PMTIMER incarnations which run at double speed. This results in a
miscalibration of the TSC by factor 0.5. So the resulting calibrated
CPU/TSC speed is half of the real CPU speed, which means that the TSC
based delay loop will run half the time it should run. That might
explain why the b43legacy driver went berserk.

On the other hand we know about systems, where the PIT based
calibration results in random crap due to heavy SMI/SMM
disturbance. On those systems the PMTIMER/HPET based calibration logic
with SMI detection shows better results.

According to Alok also virtualized systems suffer from the PIT
calibration method.

The solution is to use a more wreckage aware aproach than the current
either/or decision.

1) reimplement the retry loop which was dropped from the 32bit code
during the merge. It repeats the calibration and selects the lowest
frequency value as this is probably the closest estimate to the real
frequency

2) Monitor the delta of the TSC values in the delay loop which waits
for the PIT counter to reach zero. If the maximum value is
significantly different from the minimum, then we have a pretty safe
indicator that the loop was disturbed by an SMI.

3) keep the pmtimer/hpet reference as a backup solution for systems
where the SMI disturbance is a permanent point of failure for PIT
based calibration

4) do the loop iteration for both methods, record the lowest value and
decide after all iterations finished.

5) Set a clear preference to PIT based calibration when the result
makes sense.

The implementation does the reference calibration based on
HPET/PMTIMER around the delay, which is necessary for the PIT anyway,
but keeps separate TSC values to ensure the "independency" of the
resulting calibration values.

Tested on various 32bit/64bit machines including Geode 266Mhz, AMD K6
(affected machine with a double speed pmtimer which I grabbed out of
the dump), Pentium class machines and AMD/Intel 64 bit boxen.

Bisected-by:  Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-02 20:35:56 -07:00
Peter Zijlstra
52a8968ce9 x86: fix cpufreq + sched_clock() regression
I noticed that my sched_clock() was slow on a number of machine, so I
started looking at cpufreq.

The below seems to fix the problem for me.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-25 14:39:19 +02:00
Linus Torvalds
060700b571 x86: do not enable TSC notifier if we don't need it
Impact: crash on non-TSC-equipped CPUs

Don't enable the TSC notifier if we *either*:

1. don't have a CPU, or
2. have a CPU with constant TSC.

In either of those cases, the notifier is either damaging (1) or useless(2).

From: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-08-24 17:16:28 -07:00
Marcin Slusarz
d554d9a429 x86, tsc: fix section mismatch warning
WARNING: vmlinux.o(.text+0x7950): Section mismatch in reference from the function native_calibrate_tsc() to the function .init.text:tsc_read_refs()
The function native_calibrate_tsc() references
the function __init tsc_read_refs().
This is often because native_calibrate_tsc lacks a __init
annotation or the annotation of tsc_read_refs is wrong.

tsc_read_refs is called from native_calibrate_tsc which is not __init
and native_calibrate_tsc cannot be marked __init

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-18 07:48:07 +02:00
Thomas Gleixner
431ceb83f7 x86: fix TSC build error on 32bit
Dave Hansen reported a build error on 32bit which went unnoticed
as newer gcc versions seem to optimize unused static functions
away before compiling them.

Make vread_tsc() depend on CONFIG_X86_64

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-15 22:46:47 +02:00
Glauber Costa
e54afe3863 x86: remove duplicate call to use_tsc_delay
Integration generated a duplicate call to use_tsc_delay.
Particularly, the one that is done before we check for general
tsc usability seems wrong.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10 19:47:55 +02:00