Commit Graph

222 Commits

Author SHA1 Message Date
Greg Kroah-Hartman
933141509c usb: dwc3: patches for v3.6 merge window
lots of changes for the dwc3 driver which will make
 the driver a lot more stable and some changes which
 are just cosmetic.
 
 The bulk of changes is related to mis-defined macros
 which were never used before, some fixes to error path
 which e.g. prevent the driver from initiating two
 transfer on ep0out in case of stall, some fixes to
 request dequeueing and the End Transfer Command.
 
 We have some changes to U1/U2 handling where we were
 enabling those transtions at the wrong spot (though
 we haven't seen a problem from that as of today).
 
 A few patches will make it easier to add support for
 newer releases of the core by adding definitions for
 new registers and changing the code to act accordingly
 when certain revisions are detected.
 
 There's also the usual comestic changes to make the
 driver easier to maintain and make it easier for new-
 comers to understand the driver. Also one patch fixing
 a double inclusion of a header.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJP8VNzAAoJEIaOsuA1yqREqpYP/Rq8Uy4p1TougBR64CZBmDIk
 g6kmr3PDPR1euI4rCXRRAQ+gHVo7sY4Ishf7FIj38Aq4J6muQ5bBHX43zqobtFor
 V7GB+rKGwlI14zYoH9tZo0NtiD3QjfmI/uiN7o4PpnHZCOUPR3c6xqvOUvNU7vee
 RKfnoWQbOBE7tQfHXQdulVdcbyddWJPQ/1CGOB44WcIqfGT8ZsMWQc+i4QScCA9E
 8lGKbXq10dw3E8PyxqtejcSa+nO8B7D3TwlLH1JNZD8nNKsOdhxZO3Xkm0OZoOVA
 5puQfIRJFRnIN1FyqFTfv+yD0O1bzuxz/Qrd0Tkv0HAfc/NMQntpLIe4mYFiJYyq
 H6xOcr87X3TXx7oz2JxIjo3Y5ylwgW2dYfTvPF6u4N0D6hkflx3ebko/mklOkYP2
 6TH8H1zd1x2wUkgPaCeLXiMVEyWvIh8MGZ2o9KMb73gPRuMQHVVkQFPe/BfY0l7a
 c6486uyR9h8BCSAuivbIKPD8ca+dU8bLYl9svrlGIKmJcj7KZmJ8sVT2zfY0+A+k
 0P2Yj3SUMP0DCuvMylf18+5npEn60mt2OFbU95RYakXvwCOerGxWfWr0HbqWfUgC
 dtxrghS4urZn8mmL/lTvnsR68ypFKaKIgfypuf/NQECMdANB07UQnpl4AYiAbUlK
 4OleN7N2/Kny2FE/EvVu
 =s04u
 -----END PGP SIGNATURE-----

Merge tag 'dwc3-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: dwc3: patches for v3.6 merge window

lots of changes for the dwc3 driver which will make
the driver a lot more stable and some changes which
are just cosmetic.

The bulk of changes is related to mis-defined macros
which were never used before, some fixes to error path
which e.g. prevent the driver from initiating two
transfer on ep0out in case of stall, some fixes to
request dequeueing and the End Transfer Command.

We have some changes to U1/U2 handling where we were
enabling those transtions at the wrong spot (though
we haven't seen a problem from that as of today).

A few patches will make it easier to add support for
newer releases of the core by adding definitions for
new registers and changing the code to act accordingly
when certain revisions are detected.

There's also the usual comestic changes to make the
driver easier to maintain and make it easier for new-
comers to understand the driver. Also one patch fixing
a double inclusion of a header.
2012-07-05 15:15:38 -07:00
Greg Kroah-Hartman
94ff447cf2 usb: gadget: patches for v3.6 merge window
This is quite a big pull request and contains patches
 all over the place.
 
 omap_udc is now a bit cleaner after removing omap2 support,
 fixing some checkpatch.pl warnings and errors, switching over
 to generic map/unmap routines and preventing a NULL pointer
 de-reference.
 
 s3c-hsotg has been switched over to devm_* API, got some
 locking fixes and improvements and it also got an implementation
 for the pullup() method.
 
 the mass storage gadgets changed default value of the removable
 parameter, dropped some unused options and made "file" and "ro"
 module_parameters read-only in some cases.
 
 ffs function got support for HID descriptor.
 
 Some UDCs have been converted to clk_prepare_enable() and
 clk_disable_unprepare().
 
 Marvell now got support for its USB3 controller in mainline
 after introducing its mv_u3d_core.c driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJP8VZeAAoJEIaOsuA1yqREu0YP/jSrITte+Za8HMfvV1/eVNtz
 eVd+dhx82WnfPUmDHPsC+1IzCFlOIufFsqK/lWaNxVkUaL154lL85TPbxVPggNXA
 zvEldifaDahDax2B5MRP8hQKpp8rNrik/ePSPv1Lts5HsfPT2aUOYIcNAPlqdaPs
 4x4VejujirUGIgo1swocDOHu2nB9PTqnhtLUgLGaZcAMQtT5z/ao5NGeSugbc7sS
 jvci0WKWzjxxPT77ZrcyaOrCmzTCR4yK0DZGFNsyVmY9ATTwSr/By0AgQdm36t6f
 xdqjGib+Y2C+6xW35suLo1N+3qErClNuvJtvXlQ5VUpa70dsZTFu8KiCv+td7KA1
 9mNeovoAiuWKSgDevqJ8g4mND/LFcrGLyKR2dkyA2NNVANgJpPY3y3sjSXV8USt5
 pLGolz3XFQsUejIvrmcsHKIXNrCgJChQeaBvM13dmwhw2SWPcW0OSQnw+kPOQm8W
 ByqmwSPIYxGKyd0UIcbqjlV5OXI1FcWIDSlTXbQZBId7YfVYqIuMizVvbZ8yE1pG
 RTSuyo/khG4OwVKIQoxYboNYBE2MM32L8G6Hh2ataiw1M0rjIvCh6180xENKQ2I1
 iK54ViWctzNx7OC5JozUS+9i5KafRPdbxNHMUPGQQXpcCtb6Q4fmeGTyFYuIfTFK
 hRzP4o0SpAu7V+CoZ1Zz
 =hbE6
 -----END PGP SIGNATURE-----

Merge tag 'gadget-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: gadget: patches for v3.6 merge window

This is quite a big pull request and contains patches
all over the place.

omap_udc is now a bit cleaner after removing omap2 support,
fixing some checkpatch.pl warnings and errors, switching over
to generic map/unmap routines and preventing a NULL pointer
de-reference.

s3c-hsotg has been switched over to devm_* API, got some
locking fixes and improvements and it also got an implementation
for the pullup() method.

the mass storage gadgets changed default value of the removable
parameter, dropped some unused options and made "file" and "ro"
module_parameters read-only in some cases.

ffs function got support for HID descriptor.

Some UDCs have been converted to clk_prepare_enable() and
clk_disable_unprepare().

Marvell now got support for its USB3 controller in mainline
after introducing its mv_u3d_core.c driver.
2012-07-05 15:10:09 -07:00
Pratyush Anand
6f17f74b3d usb: dwc3: return error in case of run/stop timeout
Although timeout has never been experienced, still to make it
meaningful, its better to return error if it ever occurs.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-07-02 10:04:02 +03:00
Pratyush Anand
e274a31e29 usb: dwc3: enable ACCEPT{U1,U2}ENA when SetConfiguration received
As per databook, ACCEPT{U1,U2}ENA bits should be set after receiving
SetConfiguration Command.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-07-02 10:03:55 +03:00
Pratyush Anand
dd864f20b3 usb: dwc3: no need to clear INIT{U1,U2}ENA bits
as per databook, these bits are cleared by hardware on each USB reset,
so no need to clear it explicitly by software in reset ISR.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-07-02 10:03:15 +03:00
Pratyush Anand
cbc725b371 usb: dwc3: keep default hird threshold value as 4b1100
as per data book any HIRD threshold value greater than 4b1100 is
invalid. So set the maximum valid value as default values.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-07-02 10:02:34 +03:00
Pratyush Anand
08f0d96670 usb: dwc3: correct set_halt implementation for ep0
set_halt for ep0 is called to stall a deferred control responses by the
gadget.  We already have a function to stall default control endpoint.
This patch points set_halt for ep0 to the already available function.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Michel Sanches <michel.sanches@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-07-02 10:02:07 +03:00
Felipe Balbi
5c81ababec usb: dwc3: ep0: prevent starting transfers twice on ep0
In case we try to start an invalid test mode, we
will call dwc3_ep0_stall_and_restart() but we will
also call dwc3_ep0_out_start() which will start
a second transfer on ep0.

Let's prevent any problems by returning early in
the error case.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-25 19:30:49 +03:00
Felipe Balbi
9be2395186 usb: dwc3: gadget: remove duplicated code from __dwc3_gadget_ep_set_halt
whenever we want to stall ep0, we always call
dwc3_ep0_stall_and_restart() which makes sure
to send ep0state properly rendering the code
in __dwc3_gadget_ep_set_halt() duplicated.

Reported-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-25 17:09:28 +03:00
Felipe Balbi
b4996a8631 usb: dwc3: rename res_trans_idx to resource_index
resource_index is more human readable. No
functional changes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-25 14:00:45 +03:00
Felipe Balbi
b511e5e76b usb: dwc3: gadget: split special cases of ep_queue()
It makes it easier to read and also avoids
setting DWC3_EP_PENDING_REQUEST just so the
next branch evaluates true.

No functional changes otherwise.

Cc: Pratyush Anand <pratyush.anand@st.com>
Cc: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-25 13:59:39 +03:00
Pratyush Anand
3daf74d78d usb: dwc3: remove WARN_ON from dwc_stop_active_transfer
Now we are sure that, if res_trans_idx is zero, then endpoint has been
stopped. So it's safe to just return if endpoint is already stopped. No
need to generate warning anymore.

While doing so, it's better to return when res_trans_idx is zero and
decrease one level of indentation.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>

[ balbi@ti.com: slightly changed commit log ]

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-25 13:59:26 +03:00
Pratyush Anand
58a0f23fdd USB: DWC3: Issue device soft reset before core soft reset
Synopsys specification clearly states under section "Device Power-On or
Soft Reset" that DCTL.CSftRst=1 should be first step.  So, just follow
what specification says.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-22 13:22:46 +03:00
Pratyush Anand
45627ac6a4 USB: DWC3: Put 100 ms delay for phy to be stable
Before taking core out of reset phy must be stable. So wait for 100ms
after clear phy reset.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-22 13:21:54 +03:00
Sachin Kamat
45c396ce6b usb: dwc3: Remove duplicate header file inclusion
module.h header file was included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-22 13:21:43 +03:00
Pratyush Anand
1591633ed6 usb: dwc3: giveback all queued request when ep disabled or reset received
In case of ep_disable and reset interrupt is received and, still there
was at least one request queued for dma transfer, then endpoint is
stopped first. Once endpoint is stopped, callback for all queued
request must be called.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-15 14:43:44 +03:00
Pratyush Anand
e8d4e8be86 usb: dwc3: fix giveback of queued request in ep_dequeue
In case of ep_dequeue , if dequeued request was submitted for dma
transfer, then endpoint is stopped. Once endpoint is stooped, callback
for the dequeued request must be called.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-15 14:42:49 +03:00
Felipe Balbi
b785ea7ce6 usb: gadget: composite: fix ep->maxburst initialization
bMaxBurst field on endpoint companion descriptor
is supposed to contain the number of burst minus
1. When passing that to controller drivers, we
should be passing the real number instead (by
incrementing 1).

While doing that, also fix the assumption on
dwc3 that value comes decremented by one.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-12 13:30:25 +03:00
Pratyush Anand
dcae3573b9 usb: dwc3: resume phy during gadget initialization on recent cores
It is needed to enumerate recent cores like 2.10a.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-06 17:37:41 +03:00
Pratyush Anand
7e39b817ee usb: dwc3: Correct DWC3_DCTL_HIRD_THRES definition
The definition of DWC3_DCTL_HIRD_THRES macro is
completely wrong. It will only work for when we
want to read the register's contents for that bitfield.

Change the macro so that it can be used to writing to
the register, and when we need to read, we can add
extra right shift of 24 bits.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>

[ balbi@ti.com: add a commit log ]

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-06 16:56:10 +03:00
Felipe Balbi
3336abb5b6 usb: dwc3: gadget: ignore endpoint IRQs when endpoint is disabled
By the time we're disabling the endpoint, HW
could already have posted more events to our
event buffer. In that case, we will receive
endpoint events for a disabled endpoint.

In order to protect ourselves from that situation,
we simply ignore endpoint interrupts whenever
the endpoint is disabled.

Tested-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-06 11:22:32 +03:00
Felipe Balbi
1e2360eada usb: dwc3: gadget: don't call stop_active_transfers() on disconnect
In case we get disconnected, we will call gadget
driver's disconnect method, which should make
sure to disable all endpoints. At that point
we will call stop_active_transfers() to make
sure we didn't leave any pending request on the
controller.

Tested-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-06 11:22:32 +03:00
Felipe Balbi
ea53b8828c usb: dwc3: gadget: don't wait for ep cmd IRQ
That IRQ is causing way too much trouble. We have
a different handling which was agreed with IP
provider and has been tested with FPGA and OMAP5.

Tested-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-06 11:22:24 +03:00
Felipe Balbi
6dbc10c61d usb: dwc3: gadget: drop useless code
We never set CMDIOC bit for Start Transfer
command, so that code will never be used.

Tested-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-06 11:21:23 +03:00
Pratyush Anand
70b674bfeb usb: dwc3: Fix break from cleanup request loop
If event status says that its last completed TRB but TRB is still owned
by HW then break from the loop, because we are not going to get correct
TRB status from trb control/size register.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-04 18:23:19 +03:00
Pratyush Anand
d6d6ec7b88 usb: dwc3: Fix missed isoc IN transaction
If an IN transfer is missed on isoc endpoint, then driver must insure
that next ep_queue is properly handled.
This patch fixes this issue by starting a new transfer for next queued
request.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-04 18:23:04 +03:00
Pratyush Anand
d05b81824e USB: DWC3: Correct DWC3_DSTS_SOFFN_MASK definition
SOF Number is bit16:3 of DSTS. Correct the mask accordingly.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-04 18:17:29 +03:00
Pratyush Anand
389f2828bb USB: DWC3: Correct DWC3_TRB_SIZE_TRBSTS definition
Correct  define for DWC3_TRB_SIZE_TRBSTS.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-04 18:17:20 +03:00
Pratyush Anand
206dd69a62 USB: DWC3: Generate interrupt on each TRB as default option
Currently in case of isoc, interrupt is programmed after each
TRB_NUM/4 ie 8th TRB. A TRB is programmed against each submitted
request from gadget. If we do not want to limit the minimum number of
necessary request to be submitted from gadget then we must receive
interrupt on each TRB submission. There can be such situation with a
gadget working with ping-pong buffer.

If a gadget does not want to receive interrupt after each request
completion then it may set no_interrupt flag.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-04 18:17:04 +03:00
Felipe Balbi
85a781019b usb: dwc3: ep0: rename dwc3_ep0_complete_req to dwc3_ep0_complete_status
That's a much more intuitive name as that function
is only called at the completion of a Status Phase.

It also matches dwc3_ep0_complete_data() for
the completion of Data Phase.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:28 +03:00
Felipe Balbi
c8cf7af452 usb: dwc3: ep0: be careful with endianness on SetSEL command
USB is always little endian, but this driver
could run on non little endian cpus. Let's
be carefull with that.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:27 +03:00
Felipe Balbi
ef21ede65e usb: dwc3: ep0: simplify error handling on dwc3_ep0_inspect_setup
There's no need for returning early. Instead,
we can call dwc3_ep0_stall_and_restart()
conditionally.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:27 +03:00
Gerard CAUVY
5cbe8c220c usb: dwc3: gadget: move AcceptU1Ena and AcceptU2Ena to Reset IRQ
According to the databook, the DWC3 Core will
reset those bits to 0 on USB Bus Reset. This
means we must re-enable those bits on every
reset interrupt.

Because we will always get a Reset interrupt
after loading a gadget driver, we can, instead
of re-enabling something that was just lost,
move the handling of those bits to the Reset
Interrupt.

This patch fixes USB30CV U1/U2 Test.

Signed-off-by: Gerard CAUVY <g-cauvy1@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:26 +03:00
Felipe Balbi
c4430a2694 usb: dwc3: gadget: disable U1/U2 on disconnect
If we get a disconnect IRQ, we should take
the core out of low power mode so we can
reconnect afterwards.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:25 +03:00
Felipe Balbi
fcc023c726 usb: dwc3: gadget: prevent DCTL register corruption
If we don't read out the contents of the register
(in order to reinitialize 'reg' variable) we will
be writing unknown contents to the DCTL register
whenever we try to use dwc3_gadget_wakeup() function.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:25 +03:00
Paul Zimmerman
7acd85e0eb usb: dwc3: core: make sure evt->lpos is correctly initialized
The same event buffers will be reused when coming
out of hibernation, so we must reinitialize them
properly to avoid any mistakes.

While at that, also take dwc3_event_buffers_setup()
out of __devinit section.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:24 +03:00
Paul Zimmerman
802fde983e usb: dwc3: support new revisions of DWC3 core
Recent cores (>= 1.94a) have a set of new features,
commands and a slightly different programming model.

This patch aims to support those changes.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:23 +03:00
Paul Zimmerman
d7a46a8dfc usb: dwc3: gadget: rename phy_power() to phy_suspend()
those two functions don't power PHYs, they simply
put them in suspend state. Rename to reflect better
what functions actually do.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:23 +03:00
Paul Zimmerman
aed430e513 usb: dwc3: gadget: reinitialize retries
retries is used twice without being reinitialized.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:22 +03:00
Paul Zimmerman
2c61a8efce usb: dwc3: add definitions for new registers
This patch adds definitions for some new registers that have been
added to later versions of the controller, up to v2.10a.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:21 +03:00
Felipe Balbi
a092532483 usb: dwc3: gadget: remove trailing semicolon
That semicolon doesn't do anything, it's not
needed and should be removed.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:21 +03:00
Felipe Balbi
33b84c2c06 usb: dwc3: ep0: fix a typo in comment
s/has/have. No functional changes, just
a typo fix on a code comment.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:20 +03:00
Felipe Balbi
788a23f496 usb: dwc3: ep0: align on function signature
On our Transfer Not Ready handlers, only
dwc3_ep0_do_control_status() had a different
list of parameters.

Align on the parameters in order to keep consistency.

No functional changes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:19 +03:00
Felipe Balbi
c74c6d4a02 usb: dwc3: ep0: switch over to IS_ALIGNED
IS_ALIGNED provides a much faster operation for
checking proper size alignment then a modulo
operation. Let's use it.

Reported-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:19 +03:00
Felipe Balbi
a0807881af usb: dwc3: handle pending unaligned Control OUT data phase correctly
When DWC3_EP_PENDING_REQUEST flag is set for a Control OUT Data
phase transfer, we would be missing the proper handling for
unaligned OUT requests, thus hanging a transfer.

Since proper handling is already done on dwc3_ep0_do_control_data(),
we simply re-factor that function so it can be re-used from
__dwc3_gadget_ep0_queue().

Reported-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:18 +03:00
Felipe Balbi
4552a0ca61 usb: dwc3: fix a WARN and a comment
we're now have DWC3_EP0_BOUNCE_SIZE to tell
us the actual size of the bufer. Let's use that
instead of ep0 wMaxPacketSize.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:17 +03:00
joseph daniel
b8cacf33f0 usb: dwc3: Fix the dwc3 dependency
The warning shown up when ran with randconfig,

warning: (USB_DWC3) selects USB_XHCI_PLATFORM which has unmet direct dependencies (USB_SUPPORT && USB_XHCI_HCD)

Signed-off-by: joseph daniel <josephdanielwalter@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11 15:17:31 -07:00
Greg Kroah-Hartman
23063b378d usb: dwc3: patches for v3.5 merge window
This pull request contains one workaround for a Silicon
 Issue found on all RTL releases prior to 2.20a, which
 would cause a metastability state on Run/Stop bit.
 
 We also have some patches implementing a few extra Standard
 requests introduced by USB3 spec (Set SEL and Set Isoch Delay),
 as well as one patch, which has been pending for a long time,
 implementing LPM support.
 
 Last, but not least, we are splitting the host address space
 out of the dwc3 core driver otherwise xHCI won't be able to
 request_mem_region() its own address space. This patch is
 only needed because we are (as we should) re-using the xHCI
 driver, which is a completely separate module.
 
 Together with these three big changes, come a few extra preparatory
 patches which most move code around, define macros and so on, as
 well as a fix for Isochronous transfers which hasn't been triggered
 before.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPo7lXAAoJEIaOsuA1yqRESaIP/AgxZIfOAUbPx0GWLnhub3qr
 SxaUplweFc9q4KXRLn0kGdY9QArPR3bqW9g8KOTiRCBYRtjpACyMjibAUaAht81h
 +vLdPt87Slj2c14t1uguWFvgCUYQOCugkVvDIjRg9PCLIuTahm4cIBFqL3RJOHFf
 9WCd8JjH9ahr85ZtoCBk9B5bDNn71nS+Yh6/8+Ab90AE4vZ6t8Xx3+wLTHy2CBYQ
 UH1o61QZreAJ0J3OiUobjqrVbYwz6TM0dFYMjA6ko+OiPRhVOj8/C8aNl/U1whRm
 +7jjJiWO9aHp+Tu2OAQOBF6ydc3ZLBEiCl9RiE+O9MppmtOykzkTHFm1ZXatCEY7
 UUYOy43VXLNlHoz8nidNw6P25hAwwlSijzlyawpihKbIaE8le2MpE6I00AlciM2q
 BEo4LpluC8Rr6CUUr5W9dPZUexRlzxdAL5nQSJUnJgfEPphpP3x7dWTxUZBaWjq6
 akqjgGqVj1QKwMnqL4GILtRgdqWj6WYrw67fYVLHqj8QQla4cgXQ2sHp9/R0imvT
 nmjiL5ZiuIWWr965DgVHZwqIkdvMpSQb99a1xmptw8lFDGkVJDCssPDdEErbBMwy
 KmOSaqKeg/Yway05i+Pwo/NUKHQSZeiyuguzniMrF7iYFF1/2hVYRgfpH4V+95w/
 Xrnz4uH2YJGQGPddf87P
 =qgf/
 -----END PGP SIGNATURE-----

Merge tag 'dwc3-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: dwc3: patches for v3.5 merge window

This pull request contains one workaround for a Silicon
Issue found on all RTL releases prior to 2.20a, which
would cause a metastability state on Run/Stop bit.

We also have some patches implementing a few extra Standard
requests introduced by USB3 spec (Set SEL and Set Isoch Delay),
as well as one patch, which has been pending for a long time,
implementing LPM support.

Last, but not least, we are splitting the host address space
out of the dwc3 core driver otherwise xHCI won't be able to
request_mem_region() its own address space. This patch is
only needed because we are (as we should) re-using the xHCI
driver, which is a completely separate module.

Together with these three big changes, come a few extra preparatory
patches which most move code around, define macros and so on, as
well as a fix for Isochronous transfers which hasn't been triggered
before.

[ resolved conflicts and build error in drivers/usb/dwc3/gadget.c - gregkh]
2012-05-07 10:09:55 -07:00
Ido Shayevitz
16e78db720 usb: dwc3: Update dwc3 udc to use usb_endpoint_descriptor inside the struct usb_ep
Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-04 15:52:52 +03:00
Felipe Balbi
3ef35fafdc usb: dwc3: define DWC3_EP0_BOUNCE_SIZE
to avoid sprinkling magic constants on the driver
we define a constant to be used when allocating
setup_buffer and ep0_bounce buffer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-04 12:58:14 +03:00