Commit Graph

3822 Commits

Author SHA1 Message Date
Linus Torvalds
139ef17a46 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5446/1: ohci-at91: Limit vbus_pin assignment to the size of the array
  [ARM] 5445/1: AT91: Remove flexible array from USBH platform data
  [ARM] 5447/1: Add SZ_32K
  [ARM] omap: fix omap1 clock usecount decrement bug
  [ARM] pxa: register AC97 controller devices
  [ARM] pxa/csb701: do not register devices on non-csb726 boads
  [ARM] pxa/colibri: get rid of set_irq_type()
  [ARM] pxa/colibri: provide MAC address from ATAG_SERIAL
  [ARM] pxa/cm-x2xx: fix ucb1400 not being registered
  [ARM] pxa: Add support for suspend on PalmTX, T5 and LD
  [ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight
  [ARM] pxa: Palm Tungsten E2 basic support
  [ARM] pxa/em-x270: add libertas device registration
  [ARM] pxa/magician: Enable bq24022 regulator for gpio_vbus and pda_power
2009-04-08 15:24:09 -07:00
Justin Waters
3d6fdf7563 [ARM] 5446/1: ohci-at91: Limit vbus_pin assignment to the size of the array
Currently, the vbus_pin assignment loop is limited by the value of the "ports"
variable in the platform data.  Now that the vbus_pin array is no longer
flexible, we can use its actual size.

Signed-off-by: Justin Waters <justin.waters@timesys.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-08 20:36:18 +01:00
Yang Hongyang
929a22a558 dma-mapping: replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31)
Replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:11 -07:00
Yang Hongyang
284901a90a dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:11 -07:00
Yang Hongyang
6a35528a83 dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:10 -07:00
Alan Cox
22654b41a7 symbol: Remove various bits of left over junk
There are various bits of code here that are unfinished and instead of
being harmless either confuse or spew stuff into the logs at higher than
debug level. They can and should go away.

Also remove the bogus use of tty->lowlatency. We fixed the need for this hack
long ago (with the flip buffer rewrite) but people keep copying it into drivers.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 14:36:42 -07:00
Alan Cox
912299f6f0 tty: pl2303 needs identifiers for Siemens S81 as well as EF81
Closes bug 9065

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 14:36:41 -07:00
Alan Cox
7abcf20b8f cdc-acm: zydas 1602 identifier needed
Bugzilla #9095 and a couple of other confirmations

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 14:36:38 -07:00
Scott James Remnant
e766aeb882 usb: Auto-load cdc_acm module when device opened.
The cdc_acm module is missing the char-major-166-* alias that would
cause it to be auto-loaded when a device of that type is opened.  This
patch adds the alias.

Signed-off-by: Scott James Remnant <scott@canonical.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 14:36:31 -07:00
Linus Torvalds
87fc94d54b Merge branch 'avr32-arch' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6
* 'avr32-arch' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: add hardware handshake support to atmel_serial
  avr32: add RTS/CTS/CLK pin selection for the USARTs
  Add RTC support for Merisc boards
  avr32: at32ap700x: setup DMA for AC97C in the machine code
  avr32: at32ap700x: setup DMA for ABDAC in the machine code
  Add Merisc board support
  avr32: use gpio_is_valid() to check USBA vbus_pin I/O line
  atmel-usba-udc: use gpio_is_valid() to check vbus_pin I/O line
  avr32: fix timing LCD parameters for EVKLCD10X boards
  avr32: use GPIO line PB15 on EVKLCD10x boards for backlight
  avr32: configure MCI detect and write protect pins for EVKLCD10x boards
  avr32: set pin mask to alternative 18 bpp for EVKLCD10x boards
  avr32: add pin mask for 18-bit color on the LCD controller
  avr32: fix 15-bit LCDC pin mask to use MSB lines
2009-04-05 11:15:28 -07:00
Linus Torvalds
811158b147 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
  trivial: Update my email address
  trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
  trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
  trivial: Fix misspelling of "Celsius".
  trivial: remove unused variable 'path' in alloc_file()
  trivial: fix a pdlfush -> pdflush typo in comment
  trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
  trivial: wusb: Storage class should be before const qualifier
  trivial: drivers/char/bsr.c: Storage class should be before const qualifier
  trivial: h8300: Storage class should be before const qualifier
  trivial: fix where cgroup documentation is not correctly referred to
  trivial: Give the right path in Documentation example
  trivial: MTD: remove EOL from MODULE_DESCRIPTION
  trivial: Fix typo in bio_split()'s documentation
  trivial: PWM: fix of #endif comment
  trivial: fix typos/grammar errors in Kconfig texts
  trivial: Fix misspelling of firmware
  trivial: cgroups: documentation typo and spelling corrections
  trivial: Update contact info for Jochen Hein
  trivial: fix typo "resgister" -> "register"
  ...
2009-04-03 15:24:35 -07:00
Linus Torvalds
ea02259fdf Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/linux-hdreg-h-cleanup
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/linux-hdreg-h-cleanup:
  remove <linux/ata.h> include from <linux/hdreg.h>
  include/linux/hdreg.h: remove unused defines
  isd200: use ATA_* defines instead of *_STAT and *_ERR ones
  include/linux/hdreg.h: cover WIN_* and friends with #ifndef/#endif __KERNEL__
  aoe: WIN_* -> ATA_CMD_*
  isd200: WIN_* -> ATA_CMD_*
  include/linux/hdreg.h: cover struct hd_driveid with #ifndef/#endif __KERNEL__
  xsysace: make it 'struct hd_driveid'-free
  ubd_kern: make it 'struct hd_driveid'-free
  isd200: make it 'struct hd_driveid'-free
2009-04-03 09:02:32 -07:00
Jean Delvare
bf6aede712 workqueue: add to_delayed_work() helper function
It is a fairly common operation to have a pointer to a work and to need a
pointer to the delayed work it is contained in.  In particular, all
delayed works which want to rearm themselves will have to do that.  So it
would seem fair to offer a helper function for this operation.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:50 -07:00
Bartlomiej Zolnierkiewicz
fcd3ec6960 isd200: use ATA_* defines instead of *_STAT and *_ERR ones
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-01 21:42:25 +02:00
Bartlomiej Zolnierkiewicz
f08f31f7c7 isd200: WIN_* -> ATA_CMD_*
* Use ATA_CMD_* defines instead of WIN_* ones.

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-01 21:42:24 +02:00
Bartlomiej Zolnierkiewicz
d8881cdab5 isd200: make it 'struct hd_driveid'-free
* Factor out debug dump of id from isd200_get_inquiry_data()
  to isd200_dump_driveid().

* Change id field in struct isd200_info from 'struct hd_driveid *id'
  to 'u16 *id' and update driver accordingly.

* Include <linux/ata.h> directly instead of through <linux/hdreg.h>.

While at it:

* Use ata_id_u32() and ata_id_has_lba() macros.

There should be no functional changes caused by this patch.

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-01 21:42:19 +02:00
Alexey Dobriyan
6fd69d3cf1 proc tty: switch usb-serial to ->proc_fops
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:10 -07:00
Matt LaPlante
692105b8ac trivial: fix typos/grammar errors in Kconfig texts
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:22:01 +02:00
Nick Andrew
877d03105d trivial: Fix misspelling of firmware
Fix misspelling of firmware.

Signed-off-by: Nick Andrew <nick@nick-andrew.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:21:59 +02:00
Alexey Zaytsev
542d886b7f trivial: Fix dubious bitwise 'and' usage spotted by sparse.
It doesn't change the semantics, but clearly
the logical 'and' was meant to be used here.

Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:21:57 +02:00
Linus Torvalds
0fe41b8982 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits)
  [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
  [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
  [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0
  [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
  imxfb: Fix TFT mode
  i.MX21/27: remove ifdef CONFIG_FB_IMX
  imxfb: add clock support
  mxc: add arch_reset() function
  clkdev: add possibility to get a clock based on the device name
  i.MX1: remove fb support from mach-imx
  [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
  Gemini: Add support for Teltonika RUT100
  Gemini: gpiolib based GPIO support v2
  MAINTAINERS: add myself as Gemini architecture maintainer
  ARM: Add Gemini architecture v3
  [ARM] OMAP: Fix compile for omap2_init_common_hw()
  MAINTAINERS: Add myself as Faraday ARM core variant maintainer
  ARM: Add support for FA526 v2
  [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
  [ARM] collie: fix two minor formatting nits
  ...
2009-03-28 14:03:14 -07:00
Linus Torvalds
d54b3538b0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (119 commits)
  [SCSI] scsi_dh_rdac: Retry for NOT_READY check condition
  [SCSI] mpt2sas: make global symbols unique
  [SCSI] sd: Make revalidate less chatty
  [SCSI] sd: Try READ CAPACITY 16 first for SBC-2 devices
  [SCSI] sd: Refactor sd_read_capacity()
  [SCSI] mpt2sas v00.100.11.15
  [SCSI] mpt2sas: add MPT2SAS_MINOR(221) to miscdevice.h
  [SCSI] ch: Add scsi type modalias
  [SCSI] 3w-9xxx: add power management support
  [SCSI] bsg: add linux/types.h include to bsg.h
  [SCSI] cxgb3i: fix function descriptions
  [SCSI] libiscsi: fix possbile null ptr session command cleanup
  [SCSI] iscsi class: remove host no argument from session creation callout
  [SCSI] libiscsi: pass session failure a session struct
  [SCSI] iscsi lib: remove qdepth param from iscsi host allocation
  [SCSI] iscsi lib: have lib create work queue for transmitting IO
  [SCSI] iscsi class: fix lock dep warning on logout
  [SCSI] libiscsi: don't cap queue depth in iscsi modules
  [SCSI] iscsi_tcp: replace scsi_debug/tcp_debug logging with iscsi conn logging
  [SCSI] libiscsi_tcp: replace tcp_debug/scsi_debug logging with session/conn logging
  ...
2009-03-28 13:30:43 -07:00
Russell King
ed40d0c472 Merge branch 'origin' into devel
Conflicts:
	sound/soc/pxa/pxa2xx-i2s.c
2009-03-28 20:29:51 +00:00
Haavard Skinnemoen
b92efa9abf Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into avr32-arch 2009-03-27 16:14:38 +01:00
Linus Torvalds
8e9d208972 Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6
* 'bkl-removal' of git://git.lwn.net/linux-2.6:
  Rationalize fasync return values
  Move FASYNC bit handling to f_op->fasync()
  Use f_lock to protect f_flags
  Rename struct file->f_ep_lock
2009-03-26 16:14:02 -07:00
David S. Miller
08abe18af1 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/net/wimax/i2400m/usb-notif.c
2009-03-26 15:23:24 -07:00
Linus Torvalds
61a091827e Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (97 commits)
  USB: qcserial: add device id for HP devices
  USB: isp1760: Add a delay before reading the SKIPMAP registers in isp1760-hcd.c
  USB: allow malformed LANGID descriptors
  USB: pxa27x_udc: typo fixes and code cleanups
  USB: gadget: gadget zero uses new suspend/resume hooks
  USB: gadget: composite device-level suspend/resume hooks
  USB: r8a66597-hcd: suspend/resume support
  USB: more u32 conversion after transfer_buffer_length and actual_length
  USB: Fix cp2101 USB serial device driver termios functions for console use
  USB: CP2101 New Device ID
  USB: ipaq: handle 4 endpoint devices
  USB: S3C: Move usb-control.h to platform include
  USB: ohci-hcd: Add ARCH_S3C24XX to the ohci-s3c2410.c glue
  USB: pedantic: spelling correction in comment for ch9.h
  USB: host: fix sparse warning: Using plain integer as NULL pointer
  USB: ohci-s3c2410: fix name of bus clock
  USB: ohci-s3c2410: remove <mach/hardware.h> include
  USB: serial: rename cp2101 driver to cp210x
  USB: CP2101 Reduce Error Logging
  USB: CP2101 Support AN205 baud rates
  ...
2009-03-26 11:17:39 -07:00
Linus Torvalds
0c93ea4064 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (61 commits)
  Dynamic debug: fix pr_fmt() build error
  Dynamic debug: allow simple quoting of words
  dynamic debug: update docs
  dynamic debug: combine dprintk and dynamic printk
  sysfs: fix some bin_vm_ops errors
  kobject: don't block for each kobject_uevent
  sysfs: only allow one scheduled removal callback per kobj
  Driver core: Fix device_move() vs. dpm list ordering, v2
  Driver core: some cleanup on drivers/base/sys.c
  Driver core: implement uevent suppress in kobject
  vcs: hook sysfs devices into object lifetime instead of "binding"
  driver core: fix passing platform_data
  driver core: move platform_data into platform_device
  sysfs: don't block indefinitely for unmapped files.
  driver core: move knode_bus into private structure
  driver core: move knode_driver into private structure
  driver core: move klist_children into private structure
  driver core: create a private portion of struct device
  driver core: remove polling for driver_probe_done(v5)
  sysfs: reference sysfs_dirent from sysfs inodes
  ...

Fixed conflicts in drivers/sh/maple/maple.c manually
2009-03-26 11:17:04 -07:00
Linus Torvalds
928a726b0e Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (96 commits)
  sh: add support for SMSC Polaris platform
  sh: fix the HD64461 level-triggered interrupts handling
  sh: sh-rtc wakeup support
  sh: sh-rtc invalid time rework
  sh: sh-rtc carry interrupt rework
  sh: disallow kexec virtual entry
  sh: kexec jump: fix for ftrace.
  sh: kexec: Drop SR.BL bit toggling.
  sh: add kexec jump support
  sh: rework kexec segment code
  sh: simplify kexec vbr code
  sh: Flush only the needed range when unmapping a VMA.
  sh: Update debugfs ASID dumping for 16-bit ASID support.
  sh: tlb-pteaex: Kill off legacy PTEA updates.
  sh: Support for extended ASIDs on PTEAEX-capable SH-X3 cores.
  sh: sh7763rdp: Change IRQ number for sh_eth of sh7763rdp
  sh: espt-giga board support
  sh: dma: Make G2 DMA configurable.
  sh: dma: Make PVR2 DMA configurable.
  sh: Move IRQ multi definition of DMAC to defconfig
  ...
2009-03-26 11:11:23 -07:00
Hans-Christian Egtvedt
472a6786b0 atmel-usba-udc: use gpio_is_valid() to check vbus_pin I/O line
This patch will convert to use gpio_is_valid() to check the vbus_pin
platform data. It will also default to -ENODEV if no vbus_pin is
defined.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-26 14:58:59 +01:00
Russell King
8937b7349c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel 2009-03-25 18:31:35 +00:00
Sachin Sant
6866ac9db0 USB: FHCI: use dev_name() in place of bus_id.
Replace references to bus_id with dev_name() to fix fhci driver build break.

drivers/usb/host/fhci-hcd.c:586: error: struct device has no member named bus_id
drivers/usb/host/fhci-hcd.c:653: error: struct device has no member named bus_id
drivers/usb/host/fhci-dbg.c:111: error: struct device has no member named bus_id

Signed-off-by: Sachin Sant <sachinp@in.ibm.com>
Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:23 -07:00
Kay Sievers
5df5852446 usb: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-24 16:38:23 -07:00
Alexander Shumakovitch
fd8345f8de USB: qcserial: add device id for HP devices
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:46 -07:00
Catalin Marinas
e6bdfe36e5 USB: isp1760: Add a delay before reading the SKIPMAP registers in isp1760-hcd.c
The data read from the SKIPMAP registers is not immediately available
after writing and the driver panics when a packet is enqueued from the
interrupt handler. This patch adds an ndelay(195) before these registers
are read (delay value mentioned in section 15.1.1.3 of the ISP1760 data
sheet).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:46 -07:00
Daniel Mack
b7af0bb268 USB: allow malformed LANGID descriptors
When an USB hardware does not provide a valid LANGID, fall back to value
zero which is still a reasonable default for most devices.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:45 -07:00
Vernon Sauder
4c24b6d045 USB: pxa27x_udc: typo fixes and code cleanups
This patch is a merge of patches :
 - fix function doc and debug
 - cleanup loop count
 - optimize code to remove local variable and extra check
 - init 'req' before use
 - add missing iounmap call

[dbrownell@users.sourceforge.net: capitalize IN/OUT directions in doc]

Signed-off-by: Vernon Sauder <vsauder@inhand.com>
[folded by Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:45 -07:00
David Brownell
ab943a2e12 USB: gadget: gadget zero uses new suspend/resume hooks
Use the new device-level suspend/resume hooks for Gadget Zero;
always enable them with the OTG test mode; and support remote
wakeup on both configurations even in non-OTG mode.

This ensures that both configurations can pass the USBCV remote
wakeup tests when the OTG test mode is enabled.  This changes
behavior by adding autoresume support to the loopback config
even in non-OTG mode; the test failure was that it didn't work
in OTG mode.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:45 -07:00
David Brownell
8942939a6c USB: gadget: composite device-level suspend/resume hooks
Address one open question in the composite gadget framework:
Yes, we should have device-level suspend/resume callbacks
in addition to the function-level ones.  We have at least one
scenario (with gadget zero in OTG test mode) that's awkward
to handle without it.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:45 -07:00
Yoshihiro Shimoda
e1e609be49 USB: r8a66597-hcd: suspend/resume support
Fix the problem that system cannot suspend.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:45 -07:00
Roel Kluin
71d2718f25 USB: more u32 conversion after transfer_buffer_length and actual_length
transfer_buffer_length and actual_length have become unsigned, therefore some
additional conversion of local variables, function arguments and print
specifications is desired.

A test for a negative urb->transfer_buffer_length became obsolete; instead
we ensure that it does not exceed INT_MAX. Also, urb->actual_length is always
less than urb->transfer_buffer_length.

rh_string() does no longer return -EPIPE in the case of an unsupported ID.
Instead its only caller, rh_call_control() does the check.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:45 -07:00
VomLehn
d2ad67b3fa USB: Fix cp2101 USB serial device driver termios functions for console use
This is really a follow up to the modifications Alan Cox made for commit
95da310e66 to pass a tty_struct to various
interface functions, which broke the serial configuration (termios) functions
when the device is being used as a console. These changes restore the
configuration to proper functioning both as a tty and as a console.  As Alan
notes in that commit, these changes will need to be tweaked when we have
a proper console abstraction.

Signed-off-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:45 -07:00
Alex Stephens
d23bac9f8b USB: CP2101 New Device ID
One new device ID for CP2101 driver.

Signed-off-by: Alex Stephens alex@miranova.com
2009-03-24 16:20:45 -07:00
Mark Ellis
1b8fb4141e USB: ipaq: handle 4 endpoint devices
The ipaq driver currently enforces one port on all devices. This
is correct for 2 and 3 endpoint devices, but with 4 endpoint devices
meaningful communication occurs on the second pair.

This patch allows 2 ports for 4 endpoint devices.

Signed-off-by: Mark Ellis <mark@mpellis.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:45 -07:00
Ben Dooks
49121aa14c USB: S3C: Move usb-control.h to platform include
The usb-control.h is needed by ohci-s3c2410.c for both S3C24XX and S3C64XX
architectures, so move it to <plat/usb-control.h>

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:45 -07:00
Ben Dooks
3ba5f38f3d USB: ohci-hcd: Add ARCH_S3C24XX to the ohci-s3c2410.c glue
The ohci-s3c2410.c glue supports both CONFIG_ARCH_S3C2410 and
CONFIG_ARCH_S3C64XX so add it to the build of ohci-s3c2410.c

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:44 -07:00
Hannes Eder
a9f8ec4db1 USB: host: fix sparse warning: Using plain integer as NULL pointer
Fix this sparse warning:
 drivers/usb/host/oxu210hp-hcd.c:2687:42: warning: Using plain integer as NULL pointer

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:44 -07:00
Ben Dooks
2dfa319a64 USB: ohci-s3c2410: fix name of bus clock
The USB bus clock is usb-bus-host, so print the correct name in the
dev_err() statement if we cannot find it.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
2009-03-24 16:20:44 -07:00
Ben Dooks
3edb8a208b USB: ohci-s3c2410: remove <mach/hardware.h> include
Remove the include of <mach/hardware.h>, as no definitions
from it are used by the OHCI driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:44 -07:00
Greg Kroah-Hartman
03ee251546 USB: serial: rename cp2101 driver to cp210x
Lots of users are getting confused about the cp2101 driver.  It really
does support more than just the cp2101 device, so rename it to cp210x to
try to prevent confusion.

Cc: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:44 -07:00