Commit Graph

11 Commits

Author SHA1 Message Date
Tim Harvey
236c427cbc regulator: pfuze100: allow misprogrammed ID
prior to week 08 of 2013 Freescale misprogrammed between 1 and 3% of
PFUZE1000 parts with a ID=0x8 instead of the expected ID=0x0

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
2013-12-09 17:19:30 +00:00
Axel Lin
a1b6fa85c6 regulator: pfuze100: Fix address of FABID
According to the datasheet, the address of FABID is 0x4. Fix it.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
2013-12-09 17:18:19 +00:00
Axel Lin
6b8430c3f3 regulator: pfuze100: Fix off-by-one for max_register setting
max_register should be register count - 1.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-02 11:29:00 +01:00
Axel Lin
e56566699c regulator: pfuze100: Simplify pfuze100_set_ramp_delay implementation
Simplify the equation to calculate ramp_delay.
Below equations are equivalent:
  ramp_delay = 25000 / (2 * ramp_delay);
  ramp_delay = 50000 / (4 * ramp_delay);
  ramp_delay = 25000 / (2 * ramp_delay);
  ramp_delay = 12500 / ramp_delay;
So we don't need to read BIT6 of rdev->desc->vsel_reg for applying different
equations.

Also use rdev->desc->vsel_reg instead of run-time calculate register address.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31 17:53:46 +01:00
Axel Lin
d9493234e2 regulator: pfuze100: Fix n_voltages setting for SW2~SW4 with high bit set
Current code adjust min_uV and uV_step but missed adjusting the n_voltages
setting.

When BIT6 is clear:
        n_voltages = (1975000 - 400000) / 25000 + 1 = 64
When BIT6 is set:
        n_voltages = (3300000 - 800000) / 50000 + 1 = 51

The n_voltages needs update because when BIT6 is set 0x73 ~ 0x7f are reserved.
When using regulator_list_voltage_linear, the n_voltages does matter here
because wrong n_voltages setting make the equation return wrong result.
e.g. if selector is 63, regulator_list_voltage_linear returns
     800000 + (50000 * 63) = 4000000
     It should return -EINVAL if the selector is in the range of 51 ~ 63.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 11:20:00 +01:00
Axel Lin
2e04cc41a6 regulator: pfuze100: Use regulator_map_voltage_ascend
All table based voltage list have ascendant order.
Use regulator_map_voltage_ascend for them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 12:43:04 +01:00
Axel Lin
40839bff8b regulator: pfuze100: Fix module alias prefix
i2c drivers use "i2c:" prefix for module alias.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 06:52:14 +01:00
Axel Lin
8c86ab257d regulator: pfuze100: Use i2c_[set|get]_clientdata
Since this is a i2c driver, use i2c_[set|get]_clientdata instead of
dev_[set|get]_drvdata.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 06:49:56 +01:00
Robin Gong
12d20fc2f3 regulator: pfuze100: add MODULE_LICENSE() in pfuze100 driver
Fix building error on x86_64 and i386:
WARNING: modpost: missing MODULE_LICENSE() in
drivers/regulator/pfuze100-regulator.o

Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 06:00:54 +01:00
Robin Gong
205c97bcb8 regulator:pfuze100: fix build warning and correct the binding doc
fix building warning and correct the binding doc

Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-26 19:06:48 +01:00
Robin Gong
3784b6d64d regulator: pfuze100: add pfuze100 regulator driver
Add pfuze100 regulator driver.

Signed-off-by: Robin Gong <b38343@freescale.com>
Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-25 10:34:34 +01:00