Commit Graph

35 Commits

Author SHA1 Message Date
Gerrit Renker
129fa44785 dccp: Integrate the TFRC library with DCCP
This patch integrates the TFRC library, which is a dependency of CCID-3 (and
CCID-4), with the new use of CCIDs in the DCCP module.		

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 21:45:33 -08:00
Gerrit Renker
e5fd56ca4e dccp: Clean up ccid.c after integration of CCID plugins
This patch cleans up after integrating the CCID modules and, in addition,

 * moves the if/else cases from ccid_delete() into ccid_hc_{tx,rx}_delete();
 * removes the 'gfp' argument to ccid_new() - since it is always gfp_any().

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 21:43:23 -08:00
Gerrit Renker
4098dce5be dccp: Remove manual influence on NDP Count feature
Updating the NDP count feature is handled automatically now:
 * for CCID-2 it is disabled, since the code does not use NDP counts;
 * for CCID-3 it is enabled, as NDP counts are used to determine loss lengths.

Allowing the user to change NDP values leads to unpredictable and failing
behaviour, since it is then possible to disable NDP counts even when they
are needed (e.g. in CCID-3).

This means that only those user settings are sensible that agree with the
values for Send NDP Count implied by the choice of CCID. But those settings
are already activated by the feature negotiation (CCID dependency tracking),
hence this form of support is redundant.

At startup the initialisation of the NDP count feature uses the default
value of 0, which is done implicitly by the zeroing-out of the socket when
it is allocated. If the choice of CCID or feature negotiation enables NDP
count, this will then be updated via the NDP activation handler.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08 01:18:37 -08:00
Gerrit Renker
0049bab5e7 dccp: Remove obsolete parts of the old CCID interface
The TX/RX CCIDs of the minisock are now redundant: similar to the Ack Vector
case, their value equals initially that of the sysctl, but at the end of
feature negotiation may be something different.

The old interface removed by this patch thus has been replaced by the newer
interface to dynamically query the currently loaded CCIDs.

Also removed are the constructors for the TX CCID and the RX CCID, since the
switch "rx <-> non-rx" is done by the handler in minisocks.c (and the handler
is the only place in the code where CCIDs are loaded).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08 01:18:05 -08:00
Gerrit Renker
63b8e2861f dccp: Clean up old feature-negotiation infrastructure
The code removed by this patch is no longer referenced or used, the added
lines update documentation and copyrights.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08 01:17:32 -08:00
Gerrit Renker
422d9cdcb8 dccp: Feature activation handlers
This patch provides the post-processing of feature negotiation state, after
the negotiation has completed.

To this purpose, handlers are used and added to the dccp_feat_table. Each
handler is passed a boolean flag whether the RX or TX side of the feature
is meant.

Several handlers are provided already, new handlers can easily be added.

The initialisation is now fully dynamic, i.e. CCIDs are activated only
after the feature negotiation. The integration of this dynamic activation
is done in the subsequent patches.

Thanks to Wei Yongjun for pointing out the necessity of skipping over empty
Confirm options while copying the negotiated feature values.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-01 23:34:01 -08:00
Gerrit Renker
b1ad00422e dccp: Processing Confirm options
Analogous to the previous patch, this adds code to interpret incoming Confirm
feature-negotiation options. Both functions operate on the feature-negotiation
list of either the request_sock (server) or the dccp_sock (client).

Thanks to Wei Yongjun for pointing out that it is overly restrictive to check
the entire list of confirmed SP values.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-01 23:33:18 -08:00
Gerrit Renker
e77b8363b2 dccp: Process incoming Change feature-negotiation options
This adds/replaces code for processing incoming ChangeL/R options.
The main difference is that:
 * mandatory FN options are now interpreted inside the function
  (there are too many individual cases to do this externally);
 * the function returns an appropriate Reset code or 0,
   which is then used to fill in the data for the Reset packet.

Old code, which is no longer used or referenced, has been removed.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-01 23:32:35 -08:00
Gerrit Renker
75757a7d0c dccp: Preference list reconciliation
This provides two functions to
 * reconcile preference lists (with appropriate return codes) and
 * reorder the preference list if successful reconciliation changed the
   preferred value.

The patch also removes the old code for processing SP/NN Change options, since
new code to process these is mostly there already; related references have been
commented out.

The code for processing Change options follows in the next patch.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-01 23:31:04 -08:00
Gerrit Renker
0971d17ca3 dccp: Insert feature-negotiation options into skb
This patch replaces the earlier insertion routine from options.c, so that
code specific to feature negotiation can remain in feat.c. This is possible
by calling a function already existing in options.c.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-01 23:27:31 -08:00
Gerrit Renker
3d3e35aa78 dccp: Fix bracing in dccp_feat_list_lookup.
From: Gerrit Renker <gerrit@erg.abdn.ac.uk>

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 01:03:08 -08:00
Gerrit Renker
49aebc66d6 dccp: Deprecate old setsockopt framework
The previous setsockopt interface, which passed socket options via struct
dccp_so_feat, is complicated/difficult to use. Continuing to support it leads to
ugly code since the old approach did not distinguish between NN and SP values.

This patch removes the old setsockopt interface and replaces it with two new
functions to register NN/SP values for feature negotiation. 
These are essentially wrappers around the internal __feat_register functions,
with checking added to avoid

 * wrong usage (type);
 * changing values while the connection is in progress.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16 22:51:23 -08:00
Gerrit Renker
0c1168398e dccp: Mechanism to resolve CCID dependencies
This adds a hook to resolve features whose value depends on the choice of
CCID. It is done at the server since it can only be done after the CCID
values have been negotiated; i.e. the client will add its CCID preference
list on the Change options sent in the Request, which will be reconciled
with the local preference list of the server.

The concept is documented on
http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/feature_negotiation/\
				implementation_notes.html#ccid_dependencies

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16 22:49:52 -08:00
Gerrit Renker
9eca0a47de dccp: Resolve dependencies of features on choice of CCID
This provides a missing link in the code chain, as several features implicitly
depend and/or rely on the choice of CCID. Most notably, this is the Send Ack Vector
feature, but also Ack Ratio and Send Loss Event Rate (also taken care of).

For Send Ack Vector, the situation is as follows:
 * since CCID2 mandates the use of Ack Vectors, there is no point in allowing 
   endpoints which use CCID2 to disable Ack Vector features such a connection;

 * a peer with a TX CCID of CCID2 will always expect Ack Vectors, and a peer
   with a RX CCID of CCID2 must always send Ack Vectors (RFC 4341, sec. 4);

 * for all other CCIDs, the use of (Send) Ack Vector is optional and thus
   negotiable. However, this implies that the code negotiating the use of Ack
   Vectors also supports it (i.e. is able to supply and to either parse or
   ignore received Ack Vectors). Since this is not the case (CCID-3 has no Ack
   Vector support), the use of Ack Vectors is here disabled, with a comment
   in the source code.

An analogous consideration arises for the Send Loss Event Rate feature,
since the CCID-3 implementation does not support the loss interval options
of RFC 4342. To make such use explicit, corresponding feature-negotiation
options are inserted which signal the use of the loss event rate option,
as it is used by the CCID3 code.

Lastly, the values of the Ack Ratio feature are matched to the choice of CCID.

The patch implements this as a function which is called after the user has
made all other registrations for changing default values of features.

The table is variable-length, the reserved (and hence for feature-negotiation
invalid, confirmed by considering section 19.4 of RFC 4340) feature number `0'
is used to mark the end of the table.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 00:48:44 -08:00
Gerrit Renker
d90ebcbfa7 dccp: Query supported CCIDs
This provides a data structure to record which CCIDs are locally supported
and three accessor functions:
 - a test function for internal use which is used to validate CCID requests
   made by the user;
 - a copy function so that the list can be used for feature-negotiation;   
 - documented getsockopt() support so that the user can query capabilities.

The data structure is a table which is filled in at compile-time with the
list of available CCIDs (which in turn depends on the Kconfig choices).

Using the copy function for cloning the list of supported CCIDs is useful for
feature negotiation, since the negotiation is now with the full list of available
CCIDs (e.g. {2, 3}) instead of the default value {2}. This means negotiation 
will not fail if the peer requests to use CCID3 instead of CCID2. 

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 00:47:26 -08:00
Gerrit Renker
e8ef967a54 dccp: Registration routines for changing feature values
Two registration routines, for SP and NN features, are provided by this patch,
replacing a previous routine which was used for both feature types.

These are internal-only routines and therefore start with `__feat_register'.

It further exports the known limits of Sequence Window and Ack Ratio as symbolic
constants.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 00:43:40 -08:00
Gerrit Renker
f74e91b6cc dccp: Limit feature negotiation to connection setup phase
This patch limits feature (capability) negotation to the connection setup phase:

 1. Although it is theoretically possible to perform feature negotiation at any
    time (and RFC 4340 supports this), in practice this is prohibitively complex,
    as it requires to put traffic on hold for each new negotiation.
 2. As a byproduct of restricting feature negotiation to connection setup, the
    feature-negotiation retransmit timer is no longer required. This part is now
    mapped onto the protocol-level retransmission.
    Details indicating why timers are no longer needed can be found on
    http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/feature_negotiation/\
	                                      implementation_notes.html

This patch disables anytime negotiation, subsequent patches work out full
feature negotiation support for connection setup.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 00:42:58 -08:00
Gerrit Renker
ac75773c27 dccp: Per-socket initialisation of feature negotiation
This provides feature-negotiation initialisation for both DCCP sockets
and DCCP request_sockets, to support feature negotiation during
connection setup.

It also resolves a FIXME regarding the congestion control
initialisation.

Thanks to Wei Yongjun for help with the IPv6 side of this patch.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-04 23:55:49 -08:00
Gerrit Renker
61e6473efb dccp: List management for new feature negotiation
This adds list initial fields and list management functions for the
new feature negotiation implementation.

Thanks to Arnaldo for suggestions and improvements.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-04 23:54:04 -08:00
Gerrit Renker
7d43d1a0f2 dccp: Implement lookup table for feature-negotiation information
A lookup table for feature-negotiation information, extracted from RFC
4340/42, is provided by this patch. All currently known features can
be found in this table, along with their feature location, their
default value, and type.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-04 23:43:47 -08:00
Chris Wright
19443178fb dccp: return -EINVAL on invalid feature length
dccp_feat_change() validates length and on error is returning 1.
This happens to work since call chain is checking for 0 == success,
but this is returned to userspace, so make it a real error value.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05 13:50:24 -07:00
Gerrit Renker
5cdae198de [DCCP]: Make code assumptions explicit
This removes several `XXX' references which indicate a missing support
for non-1-byte feature values: this is unnecessary, as all currently known
(standardised) SP feature values are 1-byte quantities.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:53 -08:00
Gerrit Renker
dd6303df09 [DCCP]: Remove unused and redundant validation functions
This removes two inlines which were both called in a single function only:

 1) dccp_feat_change() is always called with either DCCPO_CHANGE_L or DCCPO_CHANGE_R as argument
    * from dccp_set_socktopt_change() via do_dccp_setsockopt() with DCCP_SOCKOPT_CHANGE_R/L
    * from __dccp_feat_init() via dccp_feat_init() also with DCCP_SOCKOPT_CHANGE_R/L.

    Hence the dccp_feat_is_valid_type() is completely unnecessary and always returns true.

 2) Due to (1), the length test reduces to 'len >= 4', which in turn makes
    dccp_feat_is_valid_length() unnecessary.

Furthermore, the inline function dccp_feat_is_reserved() was unfolded,
since only called in a single place.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:52 -08:00
Jesper Juhl
e576de82ee [DCCP]: fix memory leak and clean up style - dccp_feat_empty_confirm()
There's a memory leak in net/dccp/feat.c::dccp_feat_empty_confirm().  If we
hit the 'default:' case of the 'switch' statement, then we return without
freeing 'opt', thus leaking 'struct dccp_opt_pend' bytes.

The leak is fixed easily enough by adding a kfree(opt); before the return
statement.

The patch also changes the layout of the 'switch' to be more in line with
CodingStyle.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-13 22:52:10 -07:00
YOSHIFUJI Hideaki
c9eaf17341 [NET] DCCP: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:19:27 -08:00
Arnaldo Carvalho de Melo
8109b02b53 [DCCP]: Whitespace cleanups
That accumulated over the last months hackaton, shame on me for not
using git-apply whitespace helping hand, will do that from now on.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-11 14:35:00 -08:00
Gerrit Renker
59348b19ef [DCCP]: Simplified conditions due to use of enum:8 states
This reaps the benefit of the earlier patch, which changed the type of
CCID 3 states to use enums, in that many conditions are now simplified
and the number of possible (unexpected) values is greatly reduced.

In a few instances, this also allowed to simplify pre-conditions; where
care has been taken to retain logical equivalence.

[DCCP]: Introduce a consistent BUG/WARN message scheme

This refines the existing set of DCCP messages so that
 * BUG(), BUG_ON(), WARN_ON() have meaningful DCCP-specific counterparts
 * DCCP_CRIT (for severe warnings) is not rate-limited
 * DCCP_WARN() is introduced as rate-limited wrapper

Using these allows a faster and cleaner transition to their original
counterparts once the code has matured into a full DCCP implementation.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02 21:24:38 -08:00
Arnaldo Carvalho de Melo
eed73417d5 [DCCP]: Use kmemdup
Code diff stats:

[acme@newtoy net-2.6.20]$ codiff /tmp/dccp.ko.before /tmp/dccp.ko.after
/pub/scm/linux/kernel/git/acme/net-2.6.20/net/dccp/feat.c:
  __dccp_feat_init      |  -16
  dccp_feat_change_recv |  -55
  dccp_feat_clone       |  -56
 3 functions changed, 127 bytes removed
[acme@newtoy net-2.6.20]$

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02 21:23:59 -08:00
Gerrit Renker
c02fdc0e81 [DCCP]: Make feature negotiation more readable
This patch replaces cryptic feature negotiation messages of type

Oct 31 15:42:20 kernel: dccp_feat_change: feat change type=32 feat=1
Oct 31 15:42:21 kernel: dccp_feat_change: feat change type=34 feat=1
Oct 31 15:42:21 kernel: dccp_feat_change: feat change type=32 feat=5

into ones of type:

Nov  2 13:54:45 kernel: dccp_feat_change: ChangeL(CCID (1), 3)
Nov  2 13:54:45 kernel: dccp_feat_change: ChangeR(CCID (1), 3)
Nov  2 13:54:45 kernel: dccp_feat_change: ChangeL(Ack Ratio (5), 2)

Also,
	* completed the feature number list wrt RFC 4340 sec. 6.4
	* annotating which ones have been implemented so far
	* implemented rudimentary sanity checking in feat.c (FIXMEs)
	* some minor fixes

Commiter note: uninlined dccp_feat_name and dccp_feat_typename, for
               consistency with dccp_{state,packet}_name, that, BTW,
               should be compiled only if CONFIG_IP_DCCP_DEBUG is
               selected, leaving this to another cset tho. Also
               shortened dccp_feat_negotiation_debug to dccp_feat_debug.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02 21:22:29 -08:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Randy Dunlap
68907dad58 [DCCP]: Use NULL for pointers, comfort sparse.
From: Randy Dunlap <rdunlap@xenotime.net>

Use NULL instead of 0 for pointers.
Fix these sparse warnings:
net/dccp/feat.c:207:20: warning: Using plain integer as NULL pointer
net/dccp/feat.c:325:21: warning: Using plain integer as NULL pointer
net/dccp/feat.c:526:20: warning: Using plain integer as NULL pointer

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 13:58:25 -08:00
Arnaldo Carvalho de Melo
8ca0d17bd7 [DCCP] feat: Pass dccp_minisock ptr where only the minisock is used
This is in preparation for having a dccp_minisock embedded into
dccp_request_sock so that feature negotiation can be done prior to
creating the full blown dccp_sock.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:51:53 -08:00
Arnaldo Carvalho de Melo
a4bf390242 [DCCP] minisock: Rename struct dccp_options to struct dccp_minisock
This will later be included in struct dccp_request_sock so that we can
have per connection feature negotiation state while in the 3way
handshake, when we clone the DCCP_ROLE_LISTEN socket (in
dccp_create_openreq_child) we'll just copy this state from
dreq_minisock to dccps_minisock.

Also the feature negotiation and option parsing code will mostly touch
dccps_minisock, which will simplify some stuff.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:50:58 -08:00
Andrea Bittau
6ffd30fbbb [DCCP] feat: Actually change the CCID upon negotiation
Change the CCID upon successful feature negotiation.

Commiter note: patch mostly rewritten to use the new ccid API.

Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 19:22:37 -08:00
Andrea Bittau
afe00251dd [DCCP]: Initial feature negotiation implementation
Still needs more work, but boots and doesn't crashes, even
does some negotiation!

18:38:52.174934  127.0.0.1.43458 > 127.0.0.1.5001: request <change_l ack_ratio 2, change_r ccid 2, change_l ccid 2>
18:38:52.218526  127.0.0.1.5001 > 127.0.0.1.43458: response <nop, nop, change_l ack_ratio 2, confirm_r ccid 2 2, confirm_l ccid 2 2, confirm_r ack_ratio 2>
18:38:52.185398  127.0.0.1.43458 > 127.0.0.1.5001: <nop, confirm_r ack_ratio 2, ack_vector0 0x00, elapsed_time 212>

:-)

Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 17:43:56 -08:00