Commit Graph

3256 Commits

Author SHA1 Message Date
Carmelo AMOROSO
21b6e4c710 sh: wire up accept4 syscall (non-multiplexed path)
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-14 17:58:10 +09:00
Paul Mundt
80fbf8382e sh: Enable deprecated IRQ chip APIs for MFD and GPIOLIB drivers.
There are still quite a number of MFD and GPIO expander drivers that are
using the old irq_chip APIs that haven't had a chance to update during
the .37 cycle, resulting in allyes/modconfig errors on some
configurations.

Mark Brown has done most of the legwork to get these fixed up in .38,
so this should just be a .37 stop-gap that we can drop at the end of the
.38 merge window.

Reported-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-13 14:59:51 +09:00
Paul Mundt
a9fc749224 Merge branch 'sh/urgent' into sh-fixes-for-linus 2010-12-03 14:42:29 +09:00
Nobuhiro Iwamatsu
c44352c535 sh: se/7724: Remove FSI/B of GPIO init code
se7724 board does not have FSI/B.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-03 14:42:05 +09:00
Nobuhiro Iwamatsu
e17ca5cf3c sh: se/7724: Update clock framework of FSI clock to non-legacy
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-03 14:41:57 +09:00
Paul Mundt
fa3c9f3de2 Merge branch 'sh/cachetlb' into sh-fixes-for-linus 2010-12-01 16:39:08 +09:00
Paul Mundt
55661fc1f1 sh: Assume new page cache pages have dirty dcache lines.
This follows the ARM change c01778001a
("ARM: 6379/1: Assume new page cache pages have dirty D-cache") for the
same rationale:

    There are places in Linux where writes to newly allocated page
    cache pages happen without a subsequent call to flush_dcache_page()
    (several PIO drivers including USB HCD). This patch changes the
    meaning of PG_arch_1 to be PG_dcache_clean and always flush the
    D-cache for a newly mapped page in update_mmu_cache().

This addresses issues seen with executing binaries from MMC, in
addition to some of the other HCDs that don't explicitly do cache
management for their pipe-in buffers.

Requested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-01 15:39:51 +09:00
Vasiliy Kulikov
193006f7e3 sh: boards: mach-se: use IS_ERR() instead of NULL check
clk_get() returns ERR_PTR() on error, not NULL.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-29 12:59:28 +09:00
Kuninori Morimoto
4bd5d259e4 sh: Add div6_reparent_clks to clock framework for FSI
Current clk_ops doesn't support .init which
is used to select external clock on ecovec
without CONFIG_SH_CLK_CPG_LEGACY.
To solve this problem, this patch add div6_reparent_clks
to clock-sh7724.
This patch solve compile error too.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-29 12:59:22 +09:00
Giuseppe CAVALLARO
d53e4307c2 sh: Use GCC __builtin_prefetch() to implement prefetch().
GCC's __builtin_prefetch() was introduced a long time ago, all
supported GCC versions have it. So this patch is to use it for
implementing the prefetch on SH2A and SH4.

The current  prefetch implementation is almost equivalent with
__builtin_prefetch.
The third parameter in the __builtin_prefetch is the locality
that it's not supported on SH architectures.  It has been set
to three and it should be verified if it's suitable for SH2A
as well. I didn't test on this architecture.

The builtin usage should be more efficient that an __asm__
because less barriers, and because the compiler doesn't see the
inst as a "black box" allowing better code generation.

This has been already done on other architectures (see the commit:
0453fb3c52).

Many thanks to Christian Bruel <christain.bruel@st.com> for his
support on evaluate the impact of the gcc built-in on SH4 arch.

No regressions found while testing with LMbench on STLinux targets.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-18 14:53:18 +09:00
Giuseppe CAVALLARO
94ab115fd3 sh: fix vsyscall compilation due to .eh_frame issue
This patch fixes the following error obtained when
compile the Kernel with the VSYSCALL support enabled:

  SYSCALL arch/sh/kernel/vsyscall/vsyscall-trapa.so
  sh4-linux/bin/ld: error in arch/sh/kernel/vsyscall/vsyscall-trapa.o(.eh_frame);
  no .eh_frame_hdr table will be created.
  AS      arch/sh/kernel/vsyscall/vsyscall-syscall.o

Disassembling the vsyscall-trapa.o code, with this fix applied,
we get the __kernel_vsyscall symbol defined; otherwise it was
missing.

Disassembly of section .text:

00000000 <__kernel_vsyscall>:
   0:	10 00       	.word 0x0010
   2:	00 00       	.word 0x0000
[snip]
0000040 <__kernel_sigreturn>:
  40:	05 93       	mov.w	4e <__kernel_sigreturn+0xe>,r3	! 77
  42:	10 c3       	trapa	#16
[snip]

00000060 <__kernel_rt_sigreturn>:
  60:	05 93       	mov.w	6e <__kernel_rt_sigreturn+0xe>,r3	! ad
  62:	10 c3       	trapa	#16
[snip]

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17 17:55:37 +09:00
Giuseppe CAVALLARO
a6786fdad9 sh: avoid to flush all cache in sys_cacheflush
Calling sys_cacheflush with ICACHE we can direclty flush
the icache without invoking the flush_cache_all function.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17 17:55:30 +09:00
Paul Mundt
35a96c739f sh: clkfwk: Kill off now unused algo_id in set_rate op.
Now that clk_set_rate_ex() is gone, there is also no way to get at rate
setting algo id, which is now also completely unused. Kill it off before
new clock ops start using it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-15 18:25:17 +09:00
Paul Mundt
21e1426628 Merge branches 'sh/pio-death', 'sh/nommu', 'sh/clkfwk', 'sh/core' and 'sh/intc-extension' into sh-fixes-for-linus 2010-11-08 09:42:43 +09:00
Guennadi Liakhovetski
d0013c9e3b sh: make some needlessly global sh7724 clocks static
These clocks are currently only used inside one .c file and are not
declared in any headers, therefore having them global is useless.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-08 09:35:28 +09:00
Paul Mundt
ccedb20c68 sh: Simplify phys_addr_mask()/PTE_PHYS_MASK for 29/32-bit.
Given that __in_29bit_mode() is a constant for the non-PMB case, we can
simply use the PMB-facing version of phys_addr_mask() and drop the other
variants.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-04 12:51:08 +09:00
Paul Mundt
edc9a958fd sh: nommu: Support building without an uncached mapping.
Now that nommu selects 32BIT we run in to the situation where SH-2A
supports an uncached identity mapping by way of the BSC, while the SH-2
does not. This provides stubs for the PC manglers and tidies up some of
the system*.h mess in the process.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-04 12:46:19 +09:00
Paul Mundt
e2fcf74f3d sh: nommu: use 32-bit phys mode.
The nommu code has regressed somewhat in that 29BIT gets set for the
SH-2/2A configs regardless of the fact that they are really 32BIT sans
MMU or PMB. This does a bit of tidying to get nommu properly selecting
32BIT as it was before.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-04 12:32:24 +09:00
Paul Mundt
e96ce8ebfd sh: mach-se: Fix up SE7206 no ioport build.
There was a leftover inw() used here that really just wants to be a
__raw_readw() instead. Convert it over.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-04 12:29:00 +09:00
Linus Torvalds
706d4b12f8 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (215 commits)
  ARM: memblock: setup lowmem mappings using memblock
  ARM: memblock: move meminfo into find_limits directly
  ARM: memblock: convert free_highpages() to use memblock
  ARM: move freeing of highmem pages out of mem_init()
  ARM: memblock: convert memory detail printing to use memblock
  ARM: memblock: use memblock to free memory into arm_bootmem_init()
  ARM: memblock: use memblock when initializing memory allocators
  ARM: ensure membank array is always sorted
  ARM: 6466/1: implement flush_icache_all for the rest of the CPUs
  ARM: 6464/2: fix spinlock recursion in adjust_pte()
  ARM: fix memblock breakage
  ARM: 6465/1: Fix data abort accessing proc_info from __lookup_processor_type
  ARM: 6460/1: ixp2000: fix type of ixp2000_timer_interrupt
  ARM: 6449/1: Fix for compiler warning of uninitialized variable.
  ARM: 6445/1: fixup TCM memory types
  ARM: imx: Add wake functionality to GPIO
  ARM: mx5: Add gpio-keys to mx51 babbage board
  ARM: imx: Add gpio-keys to plat-mxc
  mx31_3ds: Fix spi registration
  mx31_3ds: Fix the logic for detecting the debug board
  ...
2010-10-30 08:26:25 -07:00
Paul Mundt
e2781ac2a6 sh: mach-se: Rip out superfluous 7751 PIO routines.
MRSHPC is wholly unused here, no need to trap it specially. If support is
added in the future it can be taken care of via platform data like on the
others.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:52:07 +09:00
Paul Mundt
1e789887f3 sh: mach-se: Rip out superfluous 770x PIO routines.
Platform data takes care of all of these these days, kill them off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:48:21 +09:00
Paul Mundt
c819cc7322 sh: mach-edosk7705: Kill off machtype, consolidate board def.
Trivial shuffling and tidying.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:38:19 +09:00
Paul Mundt
c1cfed3c3a sh: mach-edosk7705: update for this century, kill off PIO trapping.
The only reason this board needs to do PIO trapping is for ethernet,
which happens to follow the same scheme as its bigger brother the
edosk7760. With ethernet properly supported through the platform device,
we can kill off the left over PIO abortion.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:34:13 +09:00
Paul Mundt
db2d0373fd sh: mach-se: Rip out superfluous 7206 PIO routines.
The PIO trapping was only for MRSHPC and the SMC ethernet. Given that the
SMC ethernet is already properly handled and that nothing is using the
MRSHPC, none of this is needed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:24:59 +09:00
Paul Mundt
2504075d38 sh: mach-systemh: Kill off dead board.
This code has been untouched since it was merged many years ago, and has
severely bitrotted since, suggesting that the board has no real users
left. Notice of intent to remove has been sent out over the last few
years, with no takers. Kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:11:56 +09:00
Paul Mundt
f6eec8d664 sh: mach-snapgear: Kill off machtype, consolidate board def.
Only the secureedge5410 was ever supported by this code, so make the
board specification explicit rather than perpetuating a mach group.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:06:53 +09:00
Paul Mundt
39c11984a4 sh: mach-snapgear: Rip out superfluous PIO routines.
None of these PIO routines do anything other than basic error checking,
get rid of them and use the generic fallbacks.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 18:59:58 +09:00
Paul Mundt
46bc858720 sh: mach-microdev: SuperIO-relative ioport mapping.
The microdev only has to contend with silly PIO mangling on anything
within the SuperIO range. As each of the SuperIO modules is already
speciail cased, we just shift that logic over to the ioport map.

With microdev PCI never being merged (and being fudamentally broken in
hardware), and the ethernet chip only doing 16-bit accesses already,
there's no need to maintain any of the extra special casing. Kill it all
off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 18:42:22 +09:00
Linus Torvalds
51399a3919 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (38 commits)
  kbuild: convert `arch/tile' to the kconfig mainmenu upgrade
  README: cite nconfig
  Revert "kconfig: Temporarily disable dependency warnings"
  kconfig: Use PATH_MAX instead of 128 for path buffer sizes.
  kconfig: Fix realloc usage()
  kconfig: Propagate const
  kconfig: Don't go out from read config loop when you read new symbol
  kconfig: fix menuconfig on debian lenny
  kbuild: migrate all arch to the kconfig mainmenu upgrade
  kconfig: expand file names
  kconfig: use the file's name of sourced file
  kconfig: constify file name
  kconfig: don't emit warning upon rootmenu's prompt redefinition
  kconfig: replace KERNELVERSION usage by the mainmenu's prompt
  kconfig: delay gconf window initialization
  kconfig: expand by default the rootmenu's prompt
  kconfig: add a symbol string expansion helper
  kconfig: regen parser
  kconfig: implement the `mainmenu' directive
  kconfig: allow PACKAGE to be defined on the compiler's command-line
  ...

Fix up trivial conflict in arch/mn10300/Kconfig
2010-10-28 16:16:39 -07:00
Russell King
b3773301c4 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6 into devel-stable
Conflicts:
	drivers/video/sh_mobile_hdmi.c
2010-10-28 20:14:38 +01:00
Linus Torvalds
3c37629578 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (32 commits)
  sh: intc: switch irq_desc iteration to new active IRQ iterator.
  sh: fix up cpu hotplug IRQ migration for irq_data changes.
  sh: oprofile: Make sure the backtrace op is available for timer-fallback.
  sh64: oprofile: Fix up kernel stack pointer size mismatch.
  sh: oprofile: Fix up and extend op_name_from_perf_id().
  sh: lockless get_user_pages_fast()
  sh64: _PAGE_SPECIAL support.
  sound: sh: ctrl_in/outX to __raw_read/writeX conversion.
  sh: disable deprecated genirq support.
  sh: update show_interrupts() for irq_data chip lookup.
  sh: intc: irq_data conversion.
  sh64: irq_data conversion.
  sh64: update for IRQ flag handling naming changes.
  rtc: rtc-rs5c313: ctrl_in/outX to __raw_read/writeX conversion.
  sh: mach-se: irq_data conversion.
  input: hp680_ts_input: ctrl_in/outX to __raw_read/writeX conversion.
  input: jornada680_kbd: ctrl_in/outX to __raw_read/writeX conversion.
  sh: hd64461: irq_data conversion.
  sh: mach-x3proto: irq_data conversion.
  sh: mach-systemh: irq_data conversion.
  ...
2010-10-28 12:06:51 -07:00
Linus Torvalds
0851668fdd Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (505 commits)
  [media] af9015: Fix max I2C message size when used with tda18271
  [media] IR: initialize ir_raw_event in few more drivers
  [media] Guard a divide in v4l1 compat layer
  [media] imon: fix nomouse modprobe option
  [media] imon: remove redundant change_protocol call
  [media] imon: fix my egregious brown paper bag w/rdev/idev split
  [media] cafe_ccic: Configure ov7670 correctly
  [media] ov7670: allow configuration of image size, clock speed, and I/O method
  [media] af9015: support for DigitalNow TinyTwin v3 [1f4d:9016]
  [media] af9015: map DigitalNow TinyTwin v2 remote
  [media] DigitalNow TinyTwin remote controller
  [media] af9015: RC fixes and improvements
  videodev2.h.xml: Update to reflect the latest changes at videodev2.h
  [media] v4l: document new Bayer and monochrome pixel formats
  [media] DocBook/v4l: Add missing formats used on gspca cpia1 and sn9c2028
  [media] firedtv: add parameter to fake ca_system_ids in CA_INFO
  [media] tm6000: fix a macro coding style issue
  tm6000: Remove some ugly debug code
  [media] Nova-S-Plus audio line input
  [media] [RFC,1/1] V4L2: Use new CAP bits in existing RDS capable drivers
  ...
2010-10-28 09:35:11 -07:00
Paul Mundt
fb41a49d96 sh: fix up cpu hotplug IRQ migration for irq_data changes.
This fixes up the __cpu_disable() path's IRQ migration for the
irq_data changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-28 11:33:21 +09:00
Namhyung Kim
9e1cb20619 ptrace: cleanup arch_ptrace() on sh
Remove unnecessary castings and get rid of dummy pointer in favor of
offsetof() macro in ptrace_32.c. Also use temporary variables and
break long lines in order to improve readability.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:12 -07:00
Namhyung Kim
9b05a69e05 ptrace: change signature of arch_ptrace()
Fix up the arguments to arch_ptrace() to take account of the fact that
@addr and @data are now unsigned long rather than long as of a preceding
patch in this series.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:10 -07:00
Paul Mundt
7c842470f3 sh: oprofile: Make sure the backtrace op is available for timer-fallback.
Presently with hardware counter support disabled the backtrace op never
gets initialized. This is a regression over the previous behaviour, so
simply add it back in.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 17:03:50 +09:00
Paul Mundt
d1ba71f764 sh64: oprofile: Fix up kernel stack pointer size mismatch.
For the backtrace code its assumed that the stack pointer is 32-bits,
which is not the case with the sh64 registers. Use the shared
kernel_stack_pointer() helper to get at the actual register, which
already takes care of the necessary typecasting.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 16:58:22 +09:00
Paul Mundt
2e4f17d230 sh: oprofile: Fix up and extend op_name_from_perf_id().
op_name_from_perf_id() currently returns a local variable, which isn't
terribly productive. As we only handle a single PMU case for now, simply
allocate and free the string from the arch init/exit context and have
op_name_from_perf_id() hand back the cached string.

This also takes UTS_MACHINE in to account, given that we build for
multiple architectures.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 16:51:33 +09:00
Paul Mundt
667b279baa sh: lockless get_user_pages_fast()
Implement get_user_pages_fast without locking in the fastpath on sh.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 16:43:08 +09:00
Paul Mundt
a16382ce1c sh64: _PAGE_SPECIAL support.
Now that sh64 has grown extended page flag support we finally have a free
bit for _PAGE_SPECIAL. Wire it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 16:40:19 +09:00
Paul Mundt
1e5cefd01a sh: disable deprecated genirq support.
Now that all of the controllers have been fixed up, we can finally select
GENERIC_HARDIRQS_NO_DEPRECATED.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:44:19 +09:00
Paul Mundt
faadfb04d9 sh: update show_interrupts() for irq_data chip lookup.
Presently the irq chip is found through the irq_desc, but as this is
going away convert over to an irq_data lookup instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:43:01 +09:00
Paul Mundt
815db1477a sh64: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:38:59 +09:00
Paul Mundt
31b37c73c5 sh64: update for IRQ flag handling naming changes.
irq_32.c was updated for the new API, while irq_64.c was overlooked. This
syncs them up and gets things building again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:34:51 +09:00
Paul Mundt
15ff2c67ab sh: mach-se: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:30:07 +09:00
Paul Mundt
19add7e116 sh: hd64461: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:18:15 +09:00
Paul Mundt
79c981283b sh: mach-x3proto: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:11:01 +09:00
Paul Mundt
5f01038473 sh: mach-systemh: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:09:31 +09:00
Paul Mundt
949bf16648 sh: imask IRQs irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 14:54:50 +09:00