Commit Graph

599 Commits

Author SHA1 Message Date
David S. Miller
437a4db66d Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2018-02-09

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Two fixes for BPF sockmap in order to break up circular map references
   from programs attached to sockmap, and detaching related sockets in
   case of socket close() event. For the latter we get rid of the
   smap_state_change() and plug into ULP infrastructure, which will later
   also be used for additional features anyway such as TX hooks. For the
   second issue, dependency chain is broken up via map release callback
   to free parse/verdict programs, all from John.

2) Fix a libbpf relocation issue that was found while implementing XDP
   support for Suricata project. Issue was that when clang was invoked
   with default target instead of bpf target, then various other e.g.
   debugging relevant sections are added to the ELF file that contained
   relocation entries pointing to non-BPF related sections which libbpf
   trips over instead of skipping them. Test cases for libbpf are added
   as well, from Jesper.

3) Various misc fixes for bpftool and one for libbpf: a small addition
   to libbpf to make sure it recognizes all standard section prefixes.
   Then, the Makefile in bpftool/Documentation is improved to explicitly
   check for rst2man being installed on the system as we otherwise risk
   installing empty man pages; the man page for bpftool-map is corrected
   and a set of missing bash completions added in order to avoid shipping
   bpftool where the completions are only partially working, from Quentin.

4) Fix applying the relocation to immediate load instructions in the
   nfp JIT which were missing a shift, from Jakub.

5) Two fixes for the BPF kernel selftests: handle CONFIG_BPF_JIT_ALWAYS_ON=y
   gracefully in test_bpf.ko module and mark them as FLAG_EXPECTED_FAIL
   in this case; and explicitly delete the veth devices in the two tests
   test_xdp_{meta,redirect}.sh before dismantling the netnses as when
   selftests are run in batch mode, then workqueue to handle destruction
   might not have finished yet and thus veth creation in next test under
   same dev name would fail, from Yonghong.

6) Fix test_kmod.sh to check the test_bpf.ko module path before performing
   an insmod, and fallback to modprobe. Especially the latter is useful
   when having a device under test that has the modules installed instead,
   from Naresh.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09 14:05:10 -05:00
Jesper Dangaard Brouer
e3d91b0ca5 tools/libbpf: handle issues with bpf ELF objects containing .eh_frames
V3: More generic skipping of relo-section (suggested by Daniel)

If clang >= 4.0.1 is missing the option '-target bpf', it will cause
llc/llvm to create two ELF sections for "Exception Frames", with
section names '.eh_frame' and '.rel.eh_frame'.

The BPF ELF loader library libbpf fails when loading files with these
sections.  The other in-kernel BPF ELF loader in samples/bpf/bpf_load.c,
handle this gracefully. And iproute2 loader also seems to work with these
"eh" sections.

The issue in libbpf is caused by bpf_object__elf_collect() skipping
some sections, and later when performing relocation it will be
pointing to a skipped section, as these sections cannot be found by
bpf_object__find_prog_by_idx() in bpf_object__collect_reloc().

This is a general issue that also occurs for other sections, like
debug sections which are also skipped and can have relo section.

As suggested by Daniel.  To avoid keeping state about all skipped
sections, instead perform a direct qlookup in the ELF object.  Lookup
the section that the relo-section points to and check if it contains
executable machine instructions (denoted by the sh_flags
SHF_EXECINSTR).  Use this check to also skip irrelevant relo-sections.

Note, for samples/bpf/ the '-target bpf' parameter to clang cannot be used
due to incompatibility with asm embedded headers, that some of the samples
include. This is explained in more details by Yonghong Song in bpf_devel_QA.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-09 00:25:12 +01:00
Jesper Dangaard Brouer
077c066a6c tools/libbpf: improve the pr_debug statements to contain section numbers
While debugging a bpf ELF loading issue, I needed to correlate the
ELF section number with the failed relocation section reference.
Thus, add section numbers/index to the pr_debug.

In debug mode, also print section that were skipped.  This helped
me identify that a section (.eh_frame) was skipped, and this was
the reason the relocation section (.rel.eh_frame) could not find
that section number.

The section numbers corresponds to the readelf tools Section Headers [Nr].

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-09 00:24:38 +01:00
Quentin Monnet
0badd33149 libbpf: complete list of strings for guessing program type
It seems that the type guessing feature for libbpf, based on the name of
the ELF section the program is located in, was inspired from
samples/bpf/prog_load.c, which was not used by any sample for loading
programs of certain types such as TC actions and classifiers, or
LWT-related types. As a consequence, libbpf is not able to guess the
type of such programs and to load them automatically if type is not
provided to the `bpf_load_prog()` function.

Add ELF section names associated to those eBPF program types so that
they can be loaded with e.g. bpftool as well.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-08 11:59:50 +01:00
Linus Torvalds
a2e5790d84 Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:

 - kasan updates

 - procfs

 - lib/bitmap updates

 - other lib/ updates

 - checkpatch tweaks

 - rapidio

 - ubsan

 - pipe fixes and cleanups

 - lots of other misc bits

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
  Documentation/sysctl/user.txt: fix typo
  MAINTAINERS: update ARM/QUALCOMM SUPPORT patterns
  MAINTAINERS: update various PALM patterns
  MAINTAINERS: update "ARM/OXNAS platform support" patterns
  MAINTAINERS: update Cortina/Gemini patterns
  MAINTAINERS: remove ARM/CLKDEV SUPPORT file pattern
  MAINTAINERS: remove ANDROID ION pattern
  mm: docs: add blank lines to silence sphinx "Unexpected indentation" errors
  mm: docs: fix parameter names mismatch
  mm: docs: fixup punctuation
  pipe: read buffer limits atomically
  pipe: simplify round_pipe_size()
  pipe: reject F_SETPIPE_SZ with size over UINT_MAX
  pipe: fix off-by-one error when checking buffer limits
  pipe: actually allow root to exceed the pipe buffer limits
  pipe, sysctl: remove pipe_proc_fn()
  pipe, sysctl: drop 'min' parameter from pipe-max-size converter
  kasan: rework Kconfig settings
  crash_dump: is_kdump_kernel can be boolean
  kernel/mutex: mutex_is_locked can be boolean
  ...
2018-02-06 22:15:42 -08:00
Clement Courbet
0ade34c370 lib: optimize cpumask_next_and()
We've measured that we spend ~0.6% of sys cpu time in cpumask_next_and().
It's essentially a joined iteration in search for a non-zero bit, which is
currently implemented as a lookup join (find a nonzero bit on the lhs,
lookup the rhs to see if it's set there).

Implement a direct join (find a nonzero bit on the incrementally built
join).  Also add generic bitmap benchmarks in the new `test_find_bit`
module for new function (see `find_next_and_bit` in [2] and [3] below).

For cpumask_next_and, direct benchmarking shows that it's 1.17x to 14x
faster with a geometric mean of 2.1 on 32 CPUs [1].  No impact on memory
usage.  Note that on Arm, the new pure-C implementation still outperforms
the old one that uses a mix of C and asm (`find_next_bit`) [3].

[1] Approximate benchmark code:

```
  unsigned long src1p[nr_cpumask_longs] = {pattern1};
  unsigned long src2p[nr_cpumask_longs] = {pattern2};
  for (/*a bunch of repetitions*/) {
    for (int n = -1; n <= nr_cpu_ids; ++n) {
      asm volatile("" : "+rm"(src1p)); // prevent any optimization
      asm volatile("" : "+rm"(src2p));
      unsigned long result = cpumask_next_and(n, src1p, src2p);
      asm volatile("" : "+rm"(result));
    }
  }
```

Results:
pattern1    pattern2     time_before/time_after
0x0000ffff  0x0000ffff   1.65
0x0000ffff  0x00005555   2.24
0x0000ffff  0x00001111   2.94
0x0000ffff  0x00000000   14.0
0x00005555  0x0000ffff   1.67
0x00005555  0x00005555   1.71
0x00005555  0x00001111   1.90
0x00005555  0x00000000   6.58
0x00001111  0x0000ffff   1.46
0x00001111  0x00005555   1.49
0x00001111  0x00001111   1.45
0x00001111  0x00000000   3.10
0x00000000  0x0000ffff   1.18
0x00000000  0x00005555   1.18
0x00000000  0x00001111   1.17
0x00000000  0x00000000   1.25
-----------------------------
               geo.mean  2.06

[2] test_find_next_bit, X86 (skylake)

 [ 3913.477422] Start testing find_bit() with random-filled bitmap
 [ 3913.477847] find_next_bit: 160868 cycles, 16484 iterations
 [ 3913.477933] find_next_zero_bit: 169542 cycles, 16285 iterations
 [ 3913.478036] find_last_bit: 201638 cycles, 16483 iterations
 [ 3913.480214] find_first_bit: 4353244 cycles, 16484 iterations
 [ 3913.480216] Start testing find_next_and_bit() with random-filled
 bitmap
 [ 3913.481074] find_next_and_bit: 89604 cycles, 8216 iterations
 [ 3913.481075] Start testing find_bit() with sparse bitmap
 [ 3913.481078] find_next_bit: 2536 cycles, 66 iterations
 [ 3913.481252] find_next_zero_bit: 344404 cycles, 32703 iterations
 [ 3913.481255] find_last_bit: 2006 cycles, 66 iterations
 [ 3913.481265] find_first_bit: 17488 cycles, 66 iterations
 [ 3913.481266] Start testing find_next_and_bit() with sparse bitmap
 [ 3913.481272] find_next_and_bit: 764 cycles, 1 iterations

[3] test_find_next_bit, arm (v7 odroid XU3).

[  267.206928] Start testing find_bit() with random-filled bitmap
[  267.214752] find_next_bit: 4474 cycles, 16419 iterations
[  267.221850] find_next_zero_bit: 5976 cycles, 16350 iterations
[  267.229294] find_last_bit: 4209 cycles, 16419 iterations
[  267.279131] find_first_bit: 1032991 cycles, 16420 iterations
[  267.286265] Start testing find_next_and_bit() with random-filled
bitmap
[  267.302386] find_next_and_bit: 2290 cycles, 8140 iterations
[  267.309422] Start testing find_bit() with sparse bitmap
[  267.316054] find_next_bit: 191 cycles, 66 iterations
[  267.322726] find_next_zero_bit: 8758 cycles, 32703 iterations
[  267.329803] find_last_bit: 84 cycles, 66 iterations
[  267.336169] find_first_bit: 4118 cycles, 66 iterations
[  267.342627] Start testing find_next_and_bit() with sparse bitmap
[  267.356919] find_next_and_bit: 91 cycles, 1 iterations

[courbet@google.com: v6]
  Link: http://lkml.kernel.org/r/20171129095715.23430-1-courbet@google.com
[geert@linux-m68k.org: m68k/bitops: always include <asm-generic/bitops/find.h>]
  Link: http://lkml.kernel.org/r/1512556816-28627-1-git-send-email-geert@linux-m68k.org
Link: http://lkml.kernel.org/r/20171128131334.23491-1-courbet@google.com
Signed-off-by: Clement Courbet <courbet@google.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:44 -08:00
Sergey Senozhatsky
ad343a98e7 tools/lib/subcmd/pager.c: do not alias select() params
Use a separate fd set for select()-s exception fds param to fix the
following gcc warning:

  pager.c:36:12: error: passing argument 2 to restrict-qualified parameter aliases with argument 4 [-Werror=restrict]
    select(1, &in, NULL, &in, NULL);
              ^~~        ~~~

Link: http://lkml.kernel.org/r/20180101105626.7168-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:44 -08:00
Eric Leblond
6061a3d672 libbpf: add missing SPDX-License-Identifier
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-02 17:53:48 -08:00
Eric Leblond
bbf48c18ee libbpf: add error reporting in XDP
Parse netlink ext attribute to get the error message returned by
the card. Code is partially take from libnl.

We add netlink.h to the uapi include of tools. And we need to
avoid include of userspace netlink header to have a successful
build of sample so nlattr.h has a define to avoid
the inclusion. Using a direct define could have been an issue
as NLMSGERR_ATTR_MAX can change in the future.

We also define SOL_NETLINK if not defined to avoid to have to
copy socket.h for a fixed value.

Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-02 17:53:48 -08:00
Eric Leblond
949abbe884 libbpf: add function to setup XDP
Most of the code is taken from set_link_xdp_fd() in bpf_load.c and
slightly modified to be library compliant.

Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-02 17:53:48 -08:00
Eric Leblond
dc2b9f19e3 tools: add netlink.h and if_link.h in tools uapi
The headers are necessary for libbpf compilation on system with older
version of the headers.

Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-02 17:53:47 -08:00
Linus Torvalds
b2fe5fa686 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Significantly shrink the core networking routing structures. Result
    of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf

 2) Add netdevsim driver for testing various offloads, from Jakub
    Kicinski.

 3) Support cross-chip FDB operations in DSA, from Vivien Didelot.

 4) Add a 2nd listener hash table for TCP, similar to what was done for
    UDP. From Martin KaFai Lau.

 5) Add eBPF based queue selection to tun, from Jason Wang.

 6) Lockless qdisc support, from John Fastabend.

 7) SCTP stream interleave support, from Xin Long.

 8) Smoother TCP receive autotuning, from Eric Dumazet.

 9) Lots of erspan tunneling enhancements, from William Tu.

10) Add true function call support to BPF, from Alexei Starovoitov.

11) Add explicit support for GRO HW offloading, from Michael Chan.

12) Support extack generation in more netlink subsystems. From Alexander
    Aring, Quentin Monnet, and Jakub Kicinski.

13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
    Russell King.

14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.

15) Many improvements and simplifications to the NFP driver bpf JIT,
    from Jakub Kicinski.

16) Support for ipv6 non-equal cost multipath routing, from Ido
    Schimmel.

17) Add resource abstration to devlink, from Arkadi Sharshevsky.

18) Packet scheduler classifier shared filter block support, from Jiri
    Pirko.

19) Avoid locking in act_csum, from Davide Caratti.

20) devinet_ioctl() simplifications from Al viro.

21) More TCP bpf improvements from Lawrence Brakmo.

22) Add support for onlink ipv6 route flag, similar to ipv4, from David
    Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
  tls: Add support for encryption using async offload accelerator
  ip6mr: fix stale iterator
  net/sched: kconfig: Remove blank help texts
  openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
  tcp_nv: fix potential integer overflow in tcpnv_acked
  r8169: fix RTL8168EP take too long to complete driver initialization.
  qmi_wwan: Add support for Quectel EP06
  rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
  ipmr: Fix ptrdiff_t print formatting
  ibmvnic: Wait for device response when changing MAC
  qlcnic: fix deadlock bug
  tcp: release sk_frag.page in tcp_disconnect
  ipv4: Get the address of interface correctly.
  net_sched: gen_estimator: fix lockdep splat
  net: macb: Handle HRESP error
  net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
  ipv6: addrconf: break critical section in addrconf_verify_rtnl()
  ipv6: change route cache aging logic
  i40e/i40evf: Update DESC_NEEDED value to reflect larger value
  bnxt_en: cleanup DIM work on device shutdown
  ...
2018-01-31 14:31:10 -08:00
Steven Rostedt (VMware)
d777f8de99 tools lib traceevent: Fix get_field_str() for dynamic strings
If a field is a dynamic string, get_field_str() returned just the
offset/size value and not the string. Have it parse the offset/size
correctly to return the actual string. Otherwise filtering fails when
trying to filter fields that are dynamic strings.

Reported-by: Gopanapalli Pradeep <prap_hai@yahoo.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004823.146333275@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:23:21 -03:00
Taeung Song
806efaed3c tools lib traceevent: Fix missing break in FALSE case of pevent_filter_clear_trivial()
Currently the FILTER_TRIVIAL_FALSE case has a missing break statement,
if the trivial type is FALSE, it will also run into the TRUE case, and
always be skipped as the TRUE statement will continue the loop on the
inverse condition of the FALSE statement.

Reported-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004823.012918807@goodmis.org
Link: http://lkml.kernel.org/r/1493218540-12296-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:22:57 -03:00
Michael Sartain
6d36ce2616 tools lib traceevent: Add UL suffix to MISSING_EVENTS
Add UL suffix to MISSING_EVENTS since ints shouldn't be left shifted by 31.

Signed-off-by: Michael Sartain <mikesart@fastmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20171016165542.13038-4-mikesart@fastmail.com
Link: http://lkml.kernel.org/r/20180112004822.829533885@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:22:49 -03:00
Federico Vaga
67dfc376f3 tools lib traceevent: Use asprintf when possible
It makes the code clearer and less error prone.

clearer:
- less code
- the code is now using the same format to create strings dynamically

less error prone:
- no magic number +2 +9 +5 to compute the size
- no copy&paste of the strings to compute the size and to concatenate

The function `asprintf` is not POSIX standard but the program
was already using it. Later it can be decided to use only POSIX
functions, then we can easly replace all the `asprintf(3)` with a local
implementation of that function.

Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Federico Vaga <federico.vaga@vaga.pv.it>
Link: http://lkml.kernel.org/r/20170802221558.9684-2-federico.vaga@vaga.pv.it
Link: http://lkml.kernel.org/r/20180112004822.686281649@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:22:19 -03:00
Steven Rostedt (VMware)
e877372880 tools lib traceevent: Show contents (in hex) of data of unrecognized type records
When a record has an unrecognized type, an error message is reported,
but it would also be helpful to see the contents of that record. At
least show what it is in hex, instead of just showing a blank line.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004822.542204577@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:22:13 -03:00
Steven Rostedt (VMware)
37db96bb49 tools lib traceevent: Handle new pointer processing of bprint strings
The Linux kernel printf() has some extended use cases that dereference
the pointer. This is dangerouse for tracing because the pointer that is
dereferenced can change or even be unmapped. It also causes issues when
the trace data is extracted, because user space does not have access to
the contents of the pointer even if it still exists.

To handle this, the kernel was updated to process these dereferenced
pointers at the time they are recorded, and not post processed. Now they
exist in the tracing buffer, and no dereference is needed at the time of
reading the trace.

The event parsing library needs to handle this new case.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004822.403349289@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:22:08 -03:00
Steven Rostedt (VMware)
38d70b7ca1 tools lib traceevent: Simplify pointer print logic and fix %pF
When processing %pX in pretty_print(), simplify the logic slightly by
incrementing the ptr to the format string if isalnum(ptr[1]) is true.
This follows the logic a bit more closely to what is in the kernel.

Also, this fixes a small bug where %pF was not giving the offset of the
function.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004822.260262257@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:22:03 -03:00
Jan Kiszka
d63444739b tools lib traceevent: Print value of unknown symbolic fields
Aligns trace-cmd with the behavior of the kernel.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/e60c889f-55e7-4ee8-0e50-151e435ffd8c@siemens.com
Link: http://lkml.kernel.org/r/20180112004822.118332436@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:21:57 -03:00
Steven Rostedt (VMware)
3df76c9a81 tools lib traceevent: Show value of flags that have not been parsed
If the value contains bits that are not defined by print_flags() helper,
then show the remaining bits. This aligns with the functionality of the
kernel.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/e60c889f-55e7-4ee8-0e50-151e435ffd8c@siemens.com
Link: http://lkml.kernel.org/r/20180112004821.976225232@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:21:45 -03:00
Michael Sartain
952a99ccfa tools lib traceevent: Fix bad force_token escape sequence
Older kernels have a bug that creates invalid symbols. event-parse.c
handles them by replacing them with a "%s" token. But the fix included
an extra backslash, and "\%s" was added incorrectly.

Signed-off-by: Michael Sartain <mikesart@fastmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004821.827168881@goodmis.org
Link: http://lkml.kernel.org/r/d320000d37c10ce0912851e1fb78d1e0c946bcd9.1497486273.git.mikesart@fastmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:21:39 -03:00
Jesper Dangaard Brouer
7110d80d53 libbpf: Makefile set specified permission mode
The third parameter to do_install was not used by $(INSTALL) command.
Fix this by only setting the -m option when the third parameter is supplied.

The use of a third parameter was introduced in commit  eb54e522a0 ("bpf:
install libbpf headers on 'make install'").

Without this change, the header files are install as executables files (755).

Fixes: eb54e522a0 ("bpf: install libbpf headers on 'make install'")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-17 01:18:10 +01:00
Jesper Dangaard Brouer
63c859101e libbpf: cleanup Makefile, remove unused elements
The plugin_dir_SQ variable is not used, remove it.
The function update_dir is also unused, remove it.
The variable $VERSION_FILES is empty, remove it.

These all originates from the introduction of the Makefile, and is likely a copy paste
from tools/lib/traceevent/Makefile.

Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-17 01:18:10 +01:00
Jesper Dangaard Brouer
7d386c6249 libbpf: install the header file libbpf.h
It seems like an oversight not to install the header file for libbpf,
given the libbpf.so + libbpf.a files are installed.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-17 01:18:10 +01:00
Quentin Monnet
d77be68955 libbpf: fix string comparison for guessing eBPF program type
libbpf is able to deduce the type of a program from the name of the ELF
section in which it is located. However, the comparison is made on the
first n characters, n being determined with sizeof() applied to the
reference string (e.g. "xdp"). When such section names are supposed to
receive a suffix separated with a slash (e.g. "kprobe/"), using sizeof()
takes the final NUL character of the reference string into account,
which implies that both strings must be equal. Instead, the desired
behaviour would consist in taking the length of the string, *without*
accounting for the ending NUL character, and to make sure the reference
string is a prefix to the ELF section name.

Subtract 1 to the total size of the string for obtaining the length for
the comparison.

Fixes: 583c90097f ("libbpf: add ability to guess program type based on section name")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-17 01:15:05 +01:00
David Miller
7d9890ef50 libbpf: Fix build errors.
These elf object pieces are of type Elf64_Xword and therefore could be
"long long" on some builds.

Cast to "long long" and use printf format %lld to deal with this since
we are building with -Werror=format.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-20 01:33:25 +01:00
Jakub Kicinski
21567eded9 libbpf: fix Makefile exit code if libelf not found
/bin/sh's exit does not recognize -1 as a number, leading to
the following error message:

/bin/sh: 1: exit: Illegal number: -1

Use 1 as the exit code.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-17 20:40:29 +01:00
Alexei Starovoitov
48cca7e44f libbpf: add support for bpf_call
- recognize relocation emitted by llvm
- since all regular function will be kept in .text section and llvm
  takes care of pc-relative offsets in bpf_call instruction
  simply copy all of .text to relevant program section while adjusting
  bpf_call instructions in program section to point to newly copied
  body of instructions from .text
- do so for all programs in the elf file
- set all programs types to the one passed to bpf_prog_load()

Note for elf files with multiple programs that use different
functions in .text section we need to do 'linker' style logic.
This work is still TBD

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-17 20:34:35 +01:00
Roman Gushchin
fe4d44b23f libbpf: prefer global symbols as bpf program name source
Libbpf picks the name of the first symbol in the corresponding
elf section to use as a program name. But without taking symbol's
scope into account it may end's up with some local label
as a program name. E.g.:

$ bpftool prog
1: type 15  name LBB0_10    tag 0390a5136ba23f5c
	loaded_at Dec 07/17:22  uid 0
	xlated 456B  not jited  memlock 4096B

Fix this by preferring global symbols as program name.

For instance:
$ bpftool prog
1: type 15  name bpf_prog1  tag 0390a5136ba23f5c
	loaded_at Dec 07/17:26  uid 0
	xlated 456B  not jited  memlock 4096B

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-14 13:37:13 +01:00
Roman Gushchin
583c90097f libbpf: add ability to guess program type based on section name
The bpf_prog_load() function will guess program type if it's not
specified explicitly. This functionality will be used to implement
loading of different programs without asking a user to specify
the program type. In first order it will be used by bpftool.

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-14 13:37:13 +01:00
Cheng Jian
e4795e3bb7 tools/lib/traceevent/parse-filter.c: clean up clang build warning
The uniform structure filter_arg sets its union based on the difference
of enum filter_arg_type, However, some functions use implicit type
conversion obviously.

warning: implicit conversion from enumeration type 'enum filter_exp_type'
	 to different enumeration type 'enum filter_op_type'

warning: implicit conversion from enumeration type 'enum filter_cmp_type'
	 to different enumeration type 'enum filter_exp_type'

Link: http://lkml.kernel.org/r/1509938415-113825-1-git-send-email-cj.chengjian@huawei.com
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 16:10:02 -08:00
David S. Miller
2a171788ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Files removed in 'net-next' had their license header updated
in 'net'.  We take the remove from 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04 09:26:51 +09:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Craig Gallek
fe9b5f774b libbpf: use map_flags when creating maps
This is required to use BPF_MAP_TYPE_LPM_TRIE or any other map type
which requires flags.

Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05 21:42:28 -07:00
Craig Gallek
b13c5c14db libbpf: parse maps sections of varying size
This library previously assumed a fixed-size map options structure.
Any new options were ignored.  In order to allow the options structure
to grow and to support parsing older programs, this patch updates
the maps section parsing to handle varying sizes.

Object files with maps sections smaller than expected will have the new
fields initialized to zero.  Object files which have larger than expected
maps sections will be rejected unless all of the unrecognized data is zero.

This change still assumes that each map definition in the maps section
is the same size.

Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05 21:42:28 -07:00
Alexei Starovoitov
5d0cbf9b6c libbpf: add support for BPF_PROG_QUERY
add support for BPF_PROG_QUERY command to libbpf

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 16:05:05 -07:00
Alexei Starovoitov
244d20efdb libbpf: introduce bpf_prog_detach2()
introduce bpf_prog_detach2() that takes one more argument prog_fd
vs bpf_prog_detach() that takes only attach_fd and type.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 16:05:05 -07:00
Martin KaFai Lau
88cda1c9da bpf: libbpf: Provide basic API support to specify BPF obj name
This patch extends the libbpf to provide API support to
allow specifying BPF object name.

In tools/lib/bpf/libbpf, the C symbol of the function
and the map is used.  Regarding section name, all maps are
under the same section named "maps".  Hence, section name
is not a good choice for map's name.  To be consistent with
map, bpf_prog also follows and uses its function symbol as
the prog's name.

This patch adds logic to collect function's symbols in libbpf.
There is existing codes to collect the map's symbols and no change
is needed.

The bpf_load_program_name() and bpf_map_create_name() are
added to take the name argument.  For the other bpf_map_create_xxx()
variants, a name argument is directly added to them.

In samples/bpf, bpf_load.c in particular, the symbol is also
used as the map's name and the map symbols has already been
collected in the existing code.  For bpf_prog, bpf_load.c does
not collect the function symbol name.  We can consider to collect
them later if there is a need to continue supporting the bpf_load.c.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-29 06:17:05 +01:00
Ingo Molnar
b130a699c0 perf/urgent fixes:
- Fix TUI progress bar when delta from new total from that of the
   previous update is greater than the progress "step" (screen width
   progress bar block))  (Jiri Olsa)
 
 - Make tools/lib/api make DEBUG=1 build use -D_FORTIFY_SOURCE=2 not
   to cripple debuginfo, just like tools/perf/ does (Jiri Olsa)
 
 - Avoid leaking the 'perf.data' file to workloads started from the
   'perf record' command line by using the O_CLOEXEC open flag (Jiri Olsa)
 
 - Fix building when libunwind's 'unwind.h' file is present in the
   include path, clashing with tools/perf/util/unwind.h (Milian Wolff)
 
 - Check per .perfconfig section entry flag, not just per section (Taeung Song)
 
 - Support running perf binaries with a dash in their name, needed to
   run perf as an AppImage (Milian Wolff)
 
 - Wait for the right child by using waitpid() when running workloads
   from 'perf stat', also to fix using perf as an AppImage (Milian Wolff)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEELb9bqkb7Te0zijNb1lAW81NSqkAFAlm4HVkACgkQ1lAW81NS
 qkByEhAAsNfQRKGQIeudLdEWx63wyZviU0KQ2zeNurbpEMHsttcHgQciYvqQmyCn
 FZ+zm21vcNBKd0pqFwPL0WPJzYSnudRT23cG2NFSLlFX7RNZhzgp0X1a75kACXCH
 oJKpu/D4YDDS8J+xLjApJUWaVOYW39yAG3Cdzq2IBYHvbvPg/ovrBkxrwKLhJJTE
 ZdQIjt+DbGbEUvgOMAji/BmpgjnV5/goz736KoOIiWso3LpAsEb5kiLBMghnSTyR
 M4Hxl7NHS+3f7J8QpTTVlcL4oxI7RgYSQbjnqdwhff4LRrTfS3txRcit20KCMwF/
 u+n1JBgR7I3ogUoO1jXyi0IaDdi77Vr7EckO5Yd+8shGIiXICwx1pMl88NvxBNHN
 6YB8sL8/Fbw6q7d/o5iHwbrkuLZDWaE7fU3kj31l+W5jSIM1orCwcUG+IPU8e2UQ
 M40vtebGEVWKkYl/UqGNGh9d6zlN8du8HW+uT0l9Hebon6YQFt/qDnP0PRQ5QlFi
 p8AozBXbCUxjenUknuaHN4QtIJhshOhzw2YRKxghWeVHqP/yJ8lrPy646NosKXMj
 qPHezIvrEarERDxn8sMlHic2edOfcbiol6GjZmxeDutvLJzc3i54+tfwVuIUG3TV
 o123i3Xt7vld6xaENxPhCvfEqo/IRRuvqAxAIvLRq+OLwc3H2ec=
 =d3gz
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo-4.14-20170912' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

- Fix TUI progress bar when delta from new total from that of the
  previous update is greater than the progress "step" (screen width
  progress bar block))  (Jiri Olsa)

- Make tools/lib/api make DEBUG=1 build use -D_FORTIFY_SOURCE=2 not
  to cripple debuginfo, just like tools/perf/ does (Jiri Olsa)

- Avoid leaking the 'perf.data' file to workloads started from the
  'perf record' command line by using the O_CLOEXEC open flag (Jiri Olsa)

- Fix building when libunwind's 'unwind.h' file is present in the
  include path, clashing with tools/perf/util/unwind.h (Milian Wolff)

- Check per .perfconfig section entry flag, not just per section (Taeung Song)

- Support running perf binaries with a dash in their name, needed to
  run perf as an AppImage (Milian Wolff)

- Wait for the right child by using waitpid() when running workloads
  from 'perf stat', also to fix using perf as an AppImage (Milian Wolff)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-13 09:25:10 +02:00
Jiri Olsa
58b79186c3 tools lib api: Fix make DEBUG=1 build
Do not use -D_FORTIFY_SOURCE=2 for DEBUG build as it seems to mess up
with debuginfo, which results in bad gdb experience.

We already do that for tools/perf/.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908084621.31595-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-12 12:34:14 -03:00
Linus Torvalds
aae3dbb477 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Support ipv6 checksum offload in sunvnet driver, from Shannon
    Nelson.

 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
    Dumazet.

 3) Allow generic XDP to work on virtual devices, from John Fastabend.

 4) Add bpf device maps and XDP_REDIRECT, which can be used to build
    arbitrary switching frameworks using XDP. From John Fastabend.

 5) Remove UFO offloads from the tree, gave us little other than bugs.

 6) Remove the IPSEC flow cache, from Florian Westphal.

 7) Support ipv6 route offload in mlxsw driver.

 8) Support VF representors in bnxt_en, from Sathya Perla.

 9) Add support for forward error correction modes to ethtool, from
    Vidya Sagar Ravipati.

10) Add time filter for packet scheduler action dumping, from Jamal Hadi
    Salim.

11) Extend the zerocopy sendmsg() used by virtio and tap to regular
    sockets via MSG_ZEROCOPY. From Willem de Bruijn.

12) Significantly rework value tracking in the BPF verifier, from Edward
    Cree.

13) Add new jump instructions to eBPF, from Daniel Borkmann.

14) Rework rtnetlink plumbing so that operations can be run without
    taking the RTNL semaphore. From Florian Westphal.

15) Support XDP in tap driver, from Jason Wang.

16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.

17) Add Huawei hinic ethernet driver.

18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
    Delalande.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
  i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
  i40e: avoid NVM acquire deadlock during NVM update
  drivers: net: xgene: Remove return statement from void function
  drivers: net: xgene: Configure tx/rx delay for ACPI
  drivers: net: xgene: Read tx/rx delay for ACPI
  rocker: fix kcalloc parameter order
  rds: Fix non-atomic operation on shared flag variable
  net: sched: don't use GFP_KERNEL under spin lock
  vhost_net: correctly check tx avail during rx busy polling
  net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
  rxrpc: Make service connection lookup always check for retry
  net: stmmac: Delete dead code for MDIO registration
  gianfar: Fix Tx flow control deactivation
  cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
  cxgb4: Fix pause frame count in t4_get_port_stats
  cxgb4: fix memory leak
  tun: rename generic_xdp to skb_xdp
  tun: reserve extra headroom only when XDP is set
  net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
  net: dsa: bcm_sf2: Advertise number of egress queues
  ...
2017-09-06 14:45:08 -07:00
David Carrillo-Cisneros
3866058ef1 perf tools: Robustify detection of clang binary
Prior to this patch, make scripts tested for CLANG with ifeq ($(CC),
clang), failing to detect CLANG binaries with different names. Fix it by
testing for the existence of __clang__ macro in the list of compiler
defined macros.

Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170827075442.108534-5-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-28 16:44:46 -03:00
David Carrillo-Cisneros
12024aacb0 tools lib: Allow external definition of CC, AR and LD
Use already defined values for CC, AR and LD when available.

Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170827075442.108534-4-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-28 16:44:45 -03:00
John Fastabend
464bc0fd62 bpf: convert sockmap field attach_bpf_fd2 to type
In the initial sockmap API we provided strparser and verdict programs
using a single attach command by extending the attach API with a the
attach_bpf_fd2 field.

However, if we add other programs in the future we will be adding a
field for every new possible type, attach_bpf_fd(3,4,..). This
seems a bit clumsy for an API. So lets push the programs using two
new type fields.

   BPF_SK_SKB_STREAM_PARSER
   BPF_SK_SKB_STREAM_VERDICT

This has the advantage of having a readable name and can easily be
extended in the future.

Updates to samples and sockmap included here also generalize tests
slightly to support upcoming patch for multiple map support.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 11:13:21 -07:00
Ingo Molnar
93da8b221d Merge branch 'linus' into perf/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-24 10:12:33 +02:00
David S. Miller
e2a7c34fb2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-08-21 17:06:42 -07:00
Eric Leblond
49bf4b36fd tools lib bpf: improve warning
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20 19:49:51 -07:00
Martin KaFai Lau
ad17d0e6c7 bpf: Allow numa selection in INNER_LRU_HASH_PREALLOC test of map_perf_test
This patch makes the needed changes to allow each process of
the INNER_LRU_HASH_PREALLOC test to provide its numa node id
when creating the lru map.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19 21:35:43 -07:00
Daniel Díaz
f15d5e6dba tools lib bpf: Fix double file test in Makefile
The Makefile verifies the same file exists twice:
  test -f ../../../include/uapi/linux/bpf.h -a \
       -f ../../../include/uapi/linux/bpf.h

The purpose of the check is to ensure the diff (immediately after the
test) doesn't fail with these two files:

  tools/include/uapi/linux/bpf.h
  include/uapi/linux/bpf.h

Same recipe for bpf_common:
  test -f ../../../include/uapi/linux/bpf_common.h -a \
       -f ../../../include/uapi/linux/bpf_common.h

This corrects the location of the tests.

Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1502814810-960-1-git-send-email-daniel.diaz@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-17 16:39:14 -03:00