Commit Graph

12817 Commits

Author SHA1 Message Date
Al Viro
a5e7ed3287 cgroup: propagate mode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:03 -05:00
Al Viro
f4ae40a6a5 switch debugfs to umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:56 -05:00
Al Viro
18bb1db3e7 switch vfs_mkdir() and ->mkdir() to umode_t
vfs_mkdir() gets int, but immediately drops everything that might not
fit into umode_t and that's the only caller of ->mkdir()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:53 -05:00
Al Viro
ff01bb4832 fs: move code out of buffer.c
Move invalidate_bdev, block_sync_page into fs/block_dev.c.  Export
kill_bdev as well, so brd doesn't have to open code it.  Reduce
buffer_head.h requirement accordingly.

Removed a rather large comment from invalidate_bdev, as it looked a bit
obsolete to bother moving.  The small comment replacing it says enough.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:07 -05:00
Al Viro
32dc730860 get rid of timer in kern/acct.c
... and clean it up a bit, while we are at it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:41 -05:00
Mandeep Singh Baines
f9fab10bbd hung_task: fix false positive during vfork
vfork parent uninterruptibly and unkillably waits for its child to
exec/exit. This wait is of unbounded length. Ignore such waits
in the hung_task detector.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
LKML-Reference: <1325344394.28904.43.camel@lappy>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-03 16:14:32 -08:00
Al Viro
d36b691077 misc latin1 to utf8 conversions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02 13:04:55 +01:00
Hugh Dickins
e6780f7243 futex: Fix uninterruptible loop due to gate_area
It was found (by Sasha) that if you use a futex located in the gate
area we get stuck in an uninterruptible infinite loop, much like the
ZERO_PAGE issue.

While looking at this problem, PeterZ realized you'll get into similar
trouble when hitting any install_special_pages() mapping.  And are there
still drivers setting up their own special mmaps without page->mapping,
and without special VM or pte flags to make get_user_pages fail?

In most cases, if page->mapping is NULL, we do not need to retry at all:
Linus points out that even /proc/sys/vm/drop_caches poses no problem,
because it ends up using remove_mapping(), which takes care not to
interfere when the page reference count is raised.

But there is still one case which does need a retry: if memory pressure
called shmem_writepage in between get_user_pages_fast dropping page
table lock and our acquiring page lock, then the page gets switched from
filecache to swapcache (and ->mapping set to NULL) whatever the refcount.
Fault it back in to get the page->mapping needed for key->shared.inode.

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-31 11:48:28 -08:00
Linus Torvalds
3b87487ac5 Revert "clockevents: Set noop handler in clockevents_exchange_device()"
This reverts commit de28f25e82.

It results in resume problems for various people. See for example

  http://thread.gmane.org/gmane.linux.kernel/1233033
  http://thread.gmane.org/gmane.linux.kernel/1233389
  http://thread.gmane.org/gmane.linux.kernel/1233159
  http://thread.gmane.org/gmane.linux.kernel/1227868/focus=1230877

and the fedora and ubuntu bug reports

  https://bugzilla.redhat.com/show_bug.cgi?id=767248
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/904569

which got bisected down to the stable version of this commit.

Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Reported-by: Phil Miller <mille121@illinois.edu>
Reported-by: Philip Langdale <philipl@overt.org>
Reported-by: Tim Gardner <tim.gardner@canonical.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg KH <gregkh@suse.de>
Cc: stable@kernel.org    # for stable kernels that applied the original
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-30 13:24:40 -08:00
Rob Herring
93797d87d6 irq: check domain hwirq range for DT translate
A DT node may have more than 1 domain associated with it, so make sure
the hwirq number is within range when doing DT translation.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2011-12-28 08:26:06 -06:00
Frederic Weisbecker
7e3aa30ac8 cgroup: Remove task_lock() from cgroup_post_fork()
cgroup_post_fork() is protected between threadgroup_change_begin()
and threadgroup_change_end() against concurrent changes of the
child's css_set in cgroup_task_migrate(). Also the child can't
exit and call cgroup_exit() at this stage, this means it's css_set
can't be changed with init_css_set concurrently.

For these reasons, we don't need to hold task_lock() on the child
because it's css_set can only remain stable in this place.

Let's remove the lock there.

v2: Update comment to explain that we are safe against
cgroup_exit()

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Containers <containers@lists.linux-foundation.org>
Cc: Cgroups <cgroups@vger.kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Mandeep Singh Baines <msb@chromium.org>
2011-12-27 09:05:20 -08:00
Kirill A. Shutemov
c6ca57500c cgroup: add sparse annotation to cgroup_iter_start() and cgroup_iter_end()
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2011-12-27 08:51:47 -08:00
Kirill A. Shutemov
1c6c3fad81 cgroup: mark cgroup_rmdir_waitq and cgroup_attach_proc() as static
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2011-12-27 08:51:46 -08:00
Avi Kivity
9e31905f29 Merge remote-tracking branch 'tip/perf/core' into kvm-updates/3.3
* tip/perf/core: (66 commits)
  perf, x86: Expose perf capability to other modules
  perf, x86: Implement arch event mask as quirk
  x86, perf: Disable non available architectural events
  jump_label: Provide jump_label_key initializers
  jump_label, x86: Fix section mismatch
  perf, core: Rate limit perf_sched_events jump_label patching
  perf: Fix enable_on_exec for sibling events
  perf: Remove superfluous arguments
  perf, x86: Prefer fixed-purpose counters when scheduling
  perf, x86: Fix event scheduler for constraints with overlapping counters
  perf, x86: Implement event scheduler helper functions
  perf: Avoid a useless pmu_disable() in the perf-tick
  x86/tools: Add decoded instruction dump mode
  x86: Update instruction decoder to support new AVX formats
  x86/tools: Fix insn_sanity message outputs
  x86/tools: Fix instruction decoder message output
  x86: Fix instruction decoder to handle grouped AVX instructions
  x86/tools: Fix Makefile to build all test tools
  perf test: Soft errors shouldn't stop the "Validate PERF_RECORD_" test
  perf test: Validate PERF_RECORD_ events and perf_sample fields
  ...

Signed-off-by: Avi Kivity <avi@redhat.com>

* commit 'b3d9468a8bd218a695e3a0ff112cd4efd27b670a': (66 commits)
  perf, x86: Expose perf capability to other modules
  perf, x86: Implement arch event mask as quirk
  x86, perf: Disable non available architectural events
  jump_label: Provide jump_label_key initializers
  jump_label, x86: Fix section mismatch
  perf, core: Rate limit perf_sched_events jump_label patching
  perf: Fix enable_on_exec for sibling events
  perf: Remove superfluous arguments
  perf, x86: Prefer fixed-purpose counters when scheduling
  perf, x86: Fix event scheduler for constraints with overlapping counters
  perf, x86: Implement event scheduler helper functions
  perf: Avoid a useless pmu_disable() in the perf-tick
  x86/tools: Add decoded instruction dump mode
  x86: Update instruction decoder to support new AVX formats
  x86/tools: Fix insn_sanity message outputs
  x86/tools: Fix instruction decoder message output
  x86: Fix instruction decoder to handle grouped AVX instructions
  x86/tools: Fix Makefile to build all test tools
  perf test: Soft errors shouldn't stop the "Validate PERF_RECORD_" test
  perf test: Validate PERF_RECORD_ events and perf_sample fields
  ...
2011-12-27 11:22:24 +02:00
Xiao Guangrong
a65cf5181a jump-label: export jump_label_inc/jump_label_dec
Export these two symbols, they will be used by KVM mmu audit

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27 11:22:04 +02:00
Rafael J. Wysocki
b7ba68c4a0 Merge branch 'pm-sleep' into pm-for-linus
* pm-sleep: (51 commits)
  PM: Drop generic_subsys_pm_ops
  PM / Sleep: Remove forward-only callbacks from AMBA bus type
  PM / Sleep: Remove forward-only callbacks from platform bus type
  PM: Run the driver callback directly if the subsystem one is not there
  PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
  PM / Sleep: Merge internal functions in generic_ops.c
  PM / Sleep: Simplify generic system suspend callbacks
  PM / Hibernate: Remove deprecated hibernation snapshot ioctls
  PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
  PM / Sleep: Recommend [un]lock_system_sleep() over using pm_mutex directly
  PM / Sleep: Replace mutex_[un]lock(&pm_mutex) with [un]lock_system_sleep()
  PM / Sleep: Make [un]lock_system_sleep() generic
  PM / Sleep: Use the freezer_count() functions in [un]lock_system_sleep() APIs
  PM / Freezer: Remove the "userspace only" constraint from freezer[_do_not]_count()
  PM / Hibernate: Replace unintuitive 'if' condition in kernel/power/user.c with 'else'
  Freezer / sunrpc / NFS: don't allow TASK_KILLABLE sleeps to block the freezer
  PM / Sleep: Unify diagnostic messages from device suspend/resume
  ACPI / PM: Do not save/restore NVS on Asus K54C/K54HR
  PM / Hibernate: Remove deprecated hibernation test modes
  PM / Hibernate: Thaw processes in SNAPSHOT_CREATE_IMAGE ioctl test path
  ...

Conflicts:
	kernel/kmod.c
2011-12-25 23:42:20 +01:00
Rafael J. Wysocki
3e68001bb1 Merge branch 'pm-misc' into pm-for-linus
* pm-misc:
  CPU: Add right qualifiers for alloc_frozen_cpus() and cpu_hotplug_pm_sync_init()
  PM / Usermodehelper: Cleanup remnants of usermodehelper_pm_callback()
2011-12-25 23:41:23 +01:00
Jamie Iles
c87fb57346 ARM: 7235/1: irqdomain: export irq_domain_simple_ops for !CONFIG_OF
irqdomain support is used in interrupt controller drivers that may not
have device tree support but only need the basic HW->Linux irq
translation.  Rather than having each of these implement their own IRQ
domain, allow them to use the simple ops.

Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring <robherring2@gmail.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-23 22:33:58 +00:00
Arun Sharma
1ac9bc6943 sched/tracing: Add a new tracepoint for sleeptime
If CONFIG_SCHEDSTATS is defined, the kernel maintains
information about how long the task was sleeping or
in the case of iowait, blocking in the kernel before
getting woken up.

This will be useful for sleep time profiling.

Note: this information is only provided for sched_fair.
Other scheduling classes may choose to provide this in
the future.

Note: the delay includes the time spent on the runqueue
as well.

Signed-off-by: Arun Sharma <asharma@fb.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1324512940-32060-2-git-send-email-asharma@fb.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-23 17:56:17 +01:00
Dave Jones
664dfa65e8 sched: Disable scheduler warnings during oopses
The panic-on-framebuffer code seems to cause a schedule
to occur during an oops. This causes a bunch of extra
spew as can be seen in:

   https://bugzilla.redhat.com/attachment.cgi?id=549230

Don't do scheduler debug checks when we are oopsing already.

Signed-off-by: Dave Jones <davej@redhat.com>
Link: http://lkml.kernel.org/r/20111222213929.GA4722@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-23 11:20:50 +01:00
Mandeep Singh Baines
892a2b90ba cgroup: only need to check oldcgrp==newgrp once
In cgroup_attach_proc it is now sufficient to only check that
oldcgrp==newcgrp once. Now that we are using threadgroup_lock()
during the migrations, oldcgrp will not change.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: containers@lists.linux-foundation.org
Cc: cgroups@vger.kernel.org
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Menage <paul@paulmenage.org>
2011-12-22 07:32:57 -08:00
Mandeep Singh Baines
b07ef77411 cgroup: remove redundant get/put of task struct
threadgroup_lock() guarantees that the target threadgroup will
remain stable - no new task will be added, no new PF_EXITING
will be set and exec won't happen.

Changes in V2:
* https://lkml.org/lkml/2011/12/20/369 (Tejun Heo)
  * Undo incorrect removal of get/put from attach_task_by_pid()
* Author
  * Remove a comment which is made stale by this change

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: containers@lists.linux-foundation.org
Cc: cgroups@vger.kernel.org
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Menage <paul@paulmenage.org>
2011-12-22 07:32:57 -08:00
Mandeep Singh Baines
026085ef5a cgroup: remove redundant get/put of old css_set from migrate
We can now assume that the css_set reference held by the task
will not go away for an exiting task. PF_EXITING state can be
trusted throughout migration by checking it after locking
threadgroup.

Changes in V4:
* https://lkml.org/lkml/2011/12/20/368 (Tejun Heo)
  * Fix typo in commit message
  * Undid the rename of css_set_check_fetched
* https://lkml.org/lkml/2011/12/20/427 (Li Zefan)
  * Fix comment in cgroup_task_migrate()
Changes in V3:
* https://lkml.org/lkml/2011/12/20/255 (Frederic Weisbecker)
  * Fixed to put error in retval
Changes in V2:
* https://lkml.org/lkml/2011/12/19/289 (Tejun Heo)
  * Updated commit message

-tj: removed stale patch description about dropped function rename.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: containers@lists.linux-foundation.org
Cc: cgroups@vger.kernel.org
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Menage <paul@paulmenage.org>
2011-12-22 07:32:57 -08:00
Kay Sievers
7239f65cf3 clockevents: remove sysdev.h
This isn't needed in the clockevents.c file, and the header file is
going away soon, so just remove the #include

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21 16:12:37 -08:00
Kay Sievers
8a25a2fd12 cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem
This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem
and converts the devices to regular devices. The sysdev drivers are
implemented as subsystem interfaces now.

After all sysdev classes are ported to regular driver core entities, the
sysdev implementation will be entirely removed from the kernel.

Userspace relies on events and generic sysfs subsystem infrastructure
from sysdev devices, which are made available with this conversion.

Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Cc: Len Brown <lenb@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21 14:29:42 -08:00
Rafael J. Wysocki
b00f4dc5ff Merge branch 'master' into pm-sleep
* master: (848 commits)
  SELinux: Fix RCU deref check warning in sel_netport_insert()
  binary_sysctl(): fix memory leak
  mm/vmalloc.c: remove static declaration of va from __get_vm_area_node
  ipmi_watchdog: restore settings when BMC reset
  oom: fix integer overflow of points in oom_badness
  memcg: keep root group unchanged if creation fails
  nilfs2: potential integer overflow in nilfs_ioctl_clean_segments()
  nilfs2: unbreak compat ioctl
  cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask
  evm: prevent racing during tfm allocation
  evm: key must be set once during initialization
  mmc: vub300: fix type of firmware_rom_wait_states module parameter
  Revert "mmc: enable runtime PM by default"
  mmc: sdhci: remove "state" argument from sdhci_suspend_host
  x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT
  IB/qib: Correct sense on freectxts increment and decrement
  RDMA/cma: Verify private data length
  cgroups: fix a css_set not found bug in cgroup_attach_proc
  oprofile: Fix uninitialized memory access when writing to writing to oprofilefs
  Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"
  ...

Conflicts:
	kernel/cgroup_freezer.c
2011-12-21 21:59:45 +01:00
Frederic Weisbecker
c84cdf75cc cgroup: Remove unnecessary task_lock before fetching css_set on migration
When we fetch the css_set of the tasks on cgroup migration, we don't need
anymore to synchronize against cgroup_exit() that could swap the old one
with init_css_set. Now that we are using threadgroup_lock() during
the migrations, we don't need to worry about it anymore.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Mandeep Singh Baines <msb@chromium.org>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Containers <containers@lists.linux-foundation.org>
Cc: Cgroups <cgroups@vger.kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Menage <paul@paulmenage.org>
2011-12-21 11:15:01 -08:00
Frederic Weisbecker
7e381b0eb1 cgroup: Drop task_lock(parent) on cgroup_fork()
We don't need to hold the parent task_lock() on the
parent in cgroup_fork() because we are already synchronized
against the two places that may change the parent css_set
concurrently:

- cgroup_exit(), but the parent obviously can't exit concurrently
- cgroup migration: we are synchronized against threadgroup_lock()

So we can safely remove the task_lock() there.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Containers <containers@lists.linux-foundation.org>
Cc: Cgroups <cgroups@vger.kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Mandeep Singh Baines <msb@chromium.org>
2011-12-21 11:15:00 -08:00
Tejun Heo
38b78eb855 tracing: Factorize filter creation
There are four places where new filter for a given filter string is
created, which involves several different steps.  This patch factors
those steps into create_[system_]filter() functions which in turn make
use of create_filter_{start|finish}() for common parts.

The only functional change is that if replace_filter_string() is
requested and fails, creation fails without any side effect instead of
being ignored.

Note that system filter is now installed after the processing is
complete which makes freeing before and then restoring filter string
on error unncessary.

-v2: Rebased to resolve conflict with 49aa29513e and updated both
     create_filter() functions to always set *filterp instead of
     requiring the caller to clear it to %NULL on entry.

Link: http://lkml.kernel.org/r/1323988305-1469-2-git-send-email-tj@kernel.org

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:27:02 -05:00
Steven Rostedt
762e120788 tracing: Have stack tracing set filtered functions at boot
Add stacktrace_filter= to the kernel command line that lets
the user pick specific functions to check the stack on.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:26:49 -05:00
Steven Rostedt
2a85a37f16 ftrace: Allow access to the boot time function enabling
Change set_ftrace_early_filter() to ftrace_set_early_filter()
and make it a global function. This will allow other subsystems
in the kernel to be able to enable function tracing at start
up and reuse the ftrace function parsing code.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:26:35 -05:00
Steven Rostedt
d2d45c7a03 tracing: Have stack_tracer use a separate list of functions
The stack_tracer is used to look at every function and check
if the current stack is bigger than the last recorded max stack size.
When a new max is found, then it saves that stack off.

Currently the stack tracer is limited by the global_ops of
the function tracer. As the stack tracer has nothing to do with
the ftrace function tracer, except that it uses it as its internal
engine, the stack tracer should have its own list.

A new file is added to the tracing debugfs directory called:

  stack_trace_filter

that can be used to select which functions you want to check the stack
on.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:25:57 -05:00
Steven Rostedt
69a3083c4a ftrace: Decouple hash items from showing filtered functions
The set_ftrace_filter shows "hashed" functions, which are functions
that are added with operations to them (like traceon and traceoff).

As other subsystems may be able to show what functions they are
using for function tracing, the hash items should no longer
be shown just because the FILTER flag is set. As they have nothing
to do with other subsystems filters.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:25:24 -05:00
Steven Rostedt
fc13cb0ce4 ftrace: Allow other users of function tracing to use the output listing
The function tracer is set up to allow any other subsystem (like perf)
to use it. Ftrace already has a way to list what functions are enabled
by the global_ops. It would be very helpful to let other users of
the function tracer to be able to use the same code.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:25:06 -05:00
Steven Rostedt
06a51d9307 ftrace: Create ftrace_hash_empty() helper routine
There are two types of hashes in the ftrace_ops; one type
is the filter_hash and the other is the notrace_hash. Either
one may be null, meaning it has no elements. But when elements
are added, the hash is allocated.

Throughout the code, a check needs to be made to see if a hash
exists or the hash has elements, but the check if the hash exists
is usually missing causing the possible "NULL pointer dereference bug".

Add a helper routine called "ftrace_hash_empty()" that returns
true if the hash doesn't exist or its count is zero. As they mean
the same thing.

Last-bug-reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:23:11 -05:00
Steven Rostedt
c842e97552 ftrace: Fix ftrace hash record update with notrace
When disabling the "notrace" records, that means we want to trace them.
If the notrace_hash is zero, it means that we want to trace all
records. But to disable a zero notrace_hash means nothing.

The check for the notrace_hash count was incorrect with:

	if (hash && !hash->count)
		return

With the correct comment above it that states that we do nothing
if the notrace_hash has zero count. But !hash also means that
the notrace hash has zero count. I think this was done to
protect against dereferencing NULL. But if !hash is true, then
we go through the following loop without doing a single thing.

Fix it to:

	if (!hash || !hash->count)
		return;

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:21:43 -05:00
Steven Rostedt
5855fead9c ftrace: Use bsearch to find record ip
Now that each set of pages in the function list are sorted by
ip, we can use bsearch to find a record within each set of pages.
This speeds up the ftrace_location() function by magnitudes.

For archs (like x86) that need to add a breakpoint at every function
that will be converted from a nop to a callback and vice versa,
the breakpoint callback needs to know if the breakpoint was for
ftrace or not. It requires finding the breakpoint ip within the
records. Doing a linear search is extremely inefficient. It is
a must to be able to do a fast binary search to find these locations.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:20:50 -05:00
Steven Rostedt
68950619f8 ftrace: Sort the mcount records on each page
Sort records by ip locations of the ftrace mcount calls on each of the
set of pages in the function list. This helps in localizing cache
usuage when updating the function locations, as well as gives us
the ability to quickly find an ip location in the list.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:19:58 -05:00
Steven Rostedt
85ae32ae01 ftrace: Replace record newlist with record page list
As new functions come in to be initalized from mcount to nop,
they are done by groups of pages. Whether it is the core kernel
or a module. There's no need to keep track of these on a per record
basis.

At startup, and as any module is loaded, the functions to be
traced are stored in a group of pages and added to the function
list at the end. We just need to keep a pointer to the first
page of the list that was added, and use that to know where to
start on the list for initializing functions.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:19:03 -05:00
Steven Rostedt
a790087554 ftrace: Allocate the mcount record pages as groups
Allocate the mcount record pages as a group of pages as big
as can be allocated and waste no more than a single page.

Grouping the mcount pages as much as possible helps with cache
locality, as we do not need to redirect with descriptors as we
cross from page to page. It also allows us to do more with the
records later on (sort them with bigger benefits).

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:18:30 -05:00
Steven Rostedt
3208230983 ftrace: Remove usage of "freed" records
Records that are added to the function trace table are
permanently there, except for modules. By separating out the
modules to their own pages that can be freed in one shot
we can remove the "freed" flag and simplify some of the record
management.

Another benefit of doing this is that we can also move the
records around; sort them.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:17:57 -05:00
Steven Rostedt
c88fd8634e ftrace: Allow archs to modify code without stop machine
The stop machine method to modify all functions in the kernel
(some 20,000 of them) is the safest way to do so across all archs.
But some archs may not need this big hammer approach to modify code
on SMP machines, and can simply just update the code it needs.

Adding a weak function arch_ftrace_update_code() that now does the
stop machine, will also let any arch override this method.

If the arch needs to check the system and then decide if it can
avoid stop machine, it can still call ftrace_run_stop_machine() to
use the old method.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:16:58 -05:00
Jiri Olsa
30fb6aa740 ftrace: Fix unregister ftrace_ops accounting
Multiple users of the function tracer can register their functions
with the ftrace_ops structure. The accounting within ftrace will
update the counter on each function record that is being traced.
When the ftrace_ops filtering adds or removes functions, the
function records will be updated accordingly if the ftrace_ops is
still registered.

When a ftrace_ops is removed, the counter of the function records,
that the ftrace_ops traces, are decremented. When they reach zero
the functions that they represent are modified to stop calling the
mcount code.

When changes are made, the code is updated via stop_machine() with
a command passed to the function to tell it what to do. There is an
ENABLE and DISABLE command that tells the called function to enable
or disable the functions. But the ENABLE is really a misnomer as it
should just update the records, as records that have been enabled
and now have a count of zero should be disabled.

The DISABLE command is used to disable all functions regardless of
their counter values. This is the big off switch and is not the
complement of the ENABLE command.

To make matters worse, when a ftrace_ops is unregistered and there
is another ftrace_ops registered, neither the DISABLE nor the
ENABLE command are set when calling into the stop_machine() function
and the records will not be updated to match their counter. A command
is passed to that function that will update the mcount code to call
the registered callback directly if it is the only one left. This
means that the ftrace_ops that is still registered will have its callback
called by all functions that have been set for it as well as the ftrace_ops
that was just unregistered.

Here's a way to trigger this bug. Compile the kernel with
CONFIG_FUNCTION_PROFILER set and with CONFIG_FUNCTION_GRAPH not set:

 CONFIG_FUNCTION_PROFILER=y
 # CONFIG_FUNCTION_GRAPH is not set

This will force the function profiler to use the function tracer instead
of the function graph tracer.

  # cd /sys/kernel/debug/tracing
  # echo schedule > set_ftrace_filter
  # echo function > current_tracer
  # cat set_ftrace_filter
 schedule
  # cat trace
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 692/68108025   #P:4
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
      kworker/0:2-909   [000] ....   531.235574: schedule <-worker_thread
           <idle>-0     [001] .N..   531.235575: schedule <-cpu_idle
      kworker/0:2-909   [000] ....   531.235597: schedule <-worker_thread
             sshd-2563  [001] ....   531.235647: schedule <-schedule_hrtimeout_range_clock

  # echo 1 > function_profile_enabled
  # echo 0 > function_porfile_enabled
  # cat set_ftrace_filter
 schedule
  # cat trace
 # tracer: function
 #
 # entries-in-buffer/entries-written: 159701/118821262   #P:4
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
           <idle>-0     [002] ...1   604.870655: local_touch_nmi <-cpu_idle
           <idle>-0     [002] d..1   604.870655: enter_idle <-cpu_idle
           <idle>-0     [002] d..1   604.870656: atomic_notifier_call_chain <-enter_idle
           <idle>-0     [002] d..1   604.870656: __atomic_notifier_call_chain <-atomic_notifier_call_chain

The same problem could have happened with the trace_probe_ops,
but they are modified with the set_frace_filter file which does the
update at closure of the file.

The simple solution is to change ENABLE to UPDATE and call it every
time an ftrace_ops is unregistered.

Link: http://lkml.kernel.org/r/1323105776-26961-3-git-send-email-jolsa@redhat.com

Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:09:14 -05:00
Daisuke Nishimura
62af3783e4 sched: Fix cgroup movement of waking process
There is a small race between try_to_wake_up() and sched_move_task(),
which is trying to move the process being woken up.

    try_to_wake_up() on CPU0       sched_move_task() on CPU1
--------------------------------+---------------------------------
  raw_spin_lock_irqsave(p->pi_lock)
  task_waking_fair()
    ->p.se.vruntime -= cfs_rq->min_vruntime
  ttwu_queue()
    ->send reschedule IPI to CPU1
  raw_spin_unlock_irqsave(p->pi_lock)
                                   task_rq_lock()
                                     -> tring to aquire both p->pi_lock and
                                        rq->lock with IRQ disabled
                                   task_move_group_fair()
                                     -> p.se.vruntime
                                          -= (old)cfs_rq->min_vruntime
                                          += (new)cfs_rq->min_vruntime
                                   task_rq_unlock()

                                   (via IPI)
                                   sched_ttwu_pending()
                                     raw_spin_lock(rq->lock)
                                     ttwu_do_activate()
                                       ...
                                       enqueue_entity()
                                         child.se->vruntime += cfs_rq->min_vruntime
                                     raw_spin_unlock(rq->lock)

As a result, vruntime of the process becomes far bigger than min_vruntime,
if (new)cfs_rq->min_vruntime >> (old)cfs_rq->min_vruntime.

This patch fixes this problem by just ignoring such process in
task_move_group_fair(), because the vruntime has already been normalized in
task_waking_fair().

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20111215143741.df82dd50.nishimura@mxp.nes.nec.co.jp
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-21 10:34:52 +01:00
Daisuke Nishimura
7ceff013c4 sched: Fix cgroup movement of newly created process
There is a small race between do_fork() and sched_move_task(), which is
trying to move the child.

            do_fork()                 sched_move_task()
--------------------------------+---------------------------------
  copy_process()
    sched_fork()
      task_fork_fair()
        -> vruntime of the child is initialized
           based on that of the parent.
  -> we can see the child in "tasks" file now.
                                    task_rq_lock()
                                    task_move_group_fair()
                                      -> child.se.vruntime
                                           -= (old)cfs_rq->min_vruntime
                                           += (new)cfs_rq->min_vruntime
                                    task_rq_unlock()
  wake_up_new_task()
    ...
    enqueue_entity()
      child.se.vruntime += cfs_rq->min_vruntime

As a result, vruntime of the child becomes far bigger than min_vruntime,
if (new)cfs_rq->min_vruntime >> (old)cfs_rq->min_vruntime.

This patch fixes this problem by just ignoring such process in
task_move_group_fair(), because the vruntime has already been normalized in
task_fork_fair().

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20111215143607.2ee12c5d.nishimura@mxp.nes.nec.co.jp
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-21 10:34:51 +01:00
Daisuke Nishimura
4fc420c91f sched: Fix cgroup movement of forking process
There is a small race between task_fork_fair() and sched_move_task(),
which is trying to move the parent.

        task_fork_fair()                 sched_move_task()
--------------------------------+---------------------------------
  cfs_rq = task_cfs_rq(current)
    -> cfs_rq is the "old" one.
  curr = cfs_rq->curr
    -> curr is set to the parent.
                                    task_rq_lock()
                                    dequeue_task()
                                      ->parent.se.vruntime -= (old)cfs_rq->min_vruntime
                                    enqueue_task()
                                      ->parent.se.vruntime += (new)cfs_rq->min_vruntime
                                    task_rq_unlock()
  raw_spin_lock_irqsave(rq->lock)
  se->vruntime = curr->vruntime
    -> vruntime of the child is set to that of the parent
       which has already been updated by sched_move_task().
  se->vruntime -= (old)cfs_rq->min_vruntime.
  raw_spin_unlock_irqrestore(rq->lock)

As a result, vruntime of the child becomes far bigger than expected,
if (new)cfs_rq->min_vruntime >> (old)cfs_rq->min_vruntime.

This patch fixes this problem by setting "cfs_rq" and "curr" after
holding the rq->lock.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Paul Turner <pjt@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20111215143655.662676b0.nishimura@mxp.nes.nec.co.jp
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-21 10:34:49 +01:00
Kamalesh Babulal
11534ec5b6 sched: Remove cfs bandwidth period check in tg_set_cfs_period()
Remove cfs bandwidth period check from tg_set_cfs_period.
Invalid bandwidth period's lower/upper limits are denoted
by min_cfs_quota_period/max_cfs_quota_period repsectively,
and are checked against valid period in tg_set_cfs_bandwidth().

As pjt pointed out, negative input will result in very large unsigned
numbers and will be caught by the max allowed period test.

Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Paul Turner <pjt@google.com>
[ammended changelog to mention negative values]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111210135925.GA14593@linux.vnet.ibm.com
--
 kernel/sched/core.c |    3 ---
 1 file changed, 3 deletions(-)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-21 10:34:48 +01:00
Peter Zijlstra
a195f004e9 sched: Fix load-balance lock-breaking
The current lock break relies on contention on the rq locks, something
which might never come because we've got IRQs disabled. Or will be
very likely because on anything with more than 2 cpus a synchronized
load-balance pass will very likely cause contention on the rq locks.

Also the sched_nr_migrate thing fails when it gets trapped the loops
of either the cgroup muck in load_balance_fair() or the move_tasks()
load condition.

Instead, use the new lb_flags field to propagate break/abort
conditions for all these loops and create a new loop outside the irq
disabled on the break being required.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-tsceb6w61q0gakmsccix6xxi@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-21 10:34:47 +01:00
Peter Zijlstra
5b54b56be5 sched: Replace all_pinned with a generic flags field
Replace the all_pinned argument with a flags field so that we can add
some extra controls throughout that entire call chain.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-33kevm71m924ok1gpxd720v3@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-21 10:34:45 +01:00
Peter Zijlstra
518cd62341 sched: Only queue remote wakeups when crossing cache boundaries
Mike reported a 13% drop in netperf TCP_RR performance due to the
new remote wakeup code. Suresh too noticed some performance issues
with it.

Reducing the IPIs to only cross cache domains solves the observed
performance issues.

Reported-by: Suresh Siddha <suresh.b.siddha@intel.com>
Reported-by: Mike Galbraith <efault@gmx.de>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Dave Kleikamp <dave.kleikamp@oracle.com>
Link: http://lkml.kernel.org/r/1323338531.17673.7.camel@twins
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-21 10:34:44 +01:00
Peter Zijlstra
f07fdec50a lockdep/waitqueues: Add better annotation
-> #2 (&tty->write_wait){-.-...}:

is a lot more informative than:

 -> #2 (key#19){-.....}:

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-8zpopbny51023rdb0qq67eye@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-21 10:07:39 +01:00
Ingo Molnar
2d2b7749e8 Merge commit 'v3.2-rc6' into core/locking
Merge reason: Pick up the latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-21 10:06:37 +01:00
Linus Torvalds
a4a4923919 Merge branch 'for-3.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
* 'for-3.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroups: fix a css_set not found bug in cgroup_attach_proc
2011-12-20 11:44:18 -08:00
Linus Torvalds
5fbd305dd2 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time/clocksource: Fix kernel-doc warnings
  rtc: m41t80: Workaround broken alarm functionality
  rtc: Expire alarms after the time is set.
2011-12-20 11:42:38 -08:00
Ingo Molnar
d87f69a16e Merge commit 'v3.2-rc6' into perf/core
Merge reason: Update with the latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-20 20:32:11 +01:00
Michel Lespinasse
3d3c8f93a2 binary_sysctl(): fix memory leak
binary_sysctl() calls sysctl_getname() which allocates from names_cache
slab usin __getname()

The matching function to free the name is __putname(), and not putname()
which should be used only to match getname() allocations.

This is because when auditing is enabled, putname() calls audit_putname
*instead* (not in addition) to __putname().  Then, if a syscall is in
progress, audit_putname does not release the name - instead, it expects
the name to get released when the syscall completes, but that will happen
only if audit_getname() was called previously, i.e.  if the name was
allocated with getname() rather than the naked __getname().  So,
__getname() followed by putname() ends up leaking memory.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-20 10:25:04 -08:00
David Rientjes
b246272ecc cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask
Kernels where MAX_NUMNODES > BITS_PER_LONG may temporarily see an empty
nodemask in a tsk's mempolicy if its previous nodemask is remapped onto a
new set of allowed cpuset nodes where the two nodemasks, as a result of
the remap, are now disjoint.

c0ff7453bb ("cpuset,mm: fix no node to alloc memory when changing
cpuset's mems") adds get_mems_allowed() to prevent the set of allowed
nodes from changing for a thread.  This causes any update to a set of
allowed nodes to stall until put_mems_allowed() is called.

This stall is unncessary, however, if at least one node remains unchanged
in the update to the set of allowed nodes.  This was addressed by
89e8a244b9 ("cpusets: avoid looping when storing to mems_allowed if one
node remains set"), but it's still possible that an empty nodemask may be
read from a mempolicy because the old nodemask may be remapped to the new
nodemask during rebind.  To prevent this, only avoid the stall if there is
no mempolicy for the thread being changed.

This is a temporary solution until all reads from mempolicy nodemasks can
be guaranteed to not be empty without the get_mems_allowed()
synchronization.

Also moves the check for nodemask intersection inside task_lock() so that
tsk->mems_allowed cannot change.  This ensures that nothing can set this
tsk's mems_allowed out from under us and also protects tsk->mempolicy.

Reported-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-20 10:25:04 -08:00
Ingo Molnar
45aa0663cc Merge branch 'memblock-kill-early_node_map' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into core/memblock 2011-12-20 12:14:26 +01:00
Martin Schwidefsky
612ef28a04 Merge branch 'sched/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into cputime-tip
Conflicts:
	drivers/cpufreq/cpufreq_conservative.c
	drivers/cpufreq/cpufreq_ondemand.c
	drivers/macintosh/rack-meter.c
	fs/proc/stat.c
	fs/proc/uptime.c
	kernel/sched/core.c
2011-12-19 19:23:15 +01:00
Mandeep Singh Baines
29e21368b9 cgroups: remove redundant get/put of css_set from css_set_check_fetched()
We already have a reference to all elements in newcg_list.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: containers@lists.linux-foundation.org
Cc: cgroups@vger.kernel.org
Cc: Paul Menage <paul@paulmenage.org>
2011-12-19 09:14:30 -08:00
Mandeep Singh Baines
e0197aae59 cgroups: fix a css_set not found bug in cgroup_attach_proc
There is a BUG when migrating a PF_EXITING proc. Since css_set_prefetch()
is not called for the PF_EXITING case, find_existing_css_set() will return
NULL inside cgroup_task_migrate() causing a BUG.

This bug is easy to reproduce. Create a zombie and echo its pid to
cgroup.procs.

$ cat zombie.c
\#include <unistd.h>

int main()
{
  if (fork())
      pause();
  return 0;
}
$

We are hitting this bug pretty regularly on ChromeOS.

This bug is already fixed by Tejun Heo's cgroup patchset which is
targetted for the next merge window:

https://lkml.org/lkml/2011/11/1/356

I've create a smaller patch here which just fixes this bug so that a
fix can be merged into the current release and stable.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Downstream-Bug-Report: http://crosbug.com/23953
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: containers@lists.linux-foundation.org
Cc: cgroups@vger.kernel.org
Cc: stable@kernel.org
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Olof Johansson <olofj@chromium.org>
2011-12-19 09:09:09 -08:00
Kusanagi Kouichi
b1b73d0950 time/clocksource: Fix kernel-doc warnings
Fix various KernelDoc build warnings.

Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Cc: John Stultz <johnstul@us.ibm.com>
Link: http://lkml.kernel.org/r/20111219091320.0D5AF6FC03D@msa105.auone-net.jp
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-19 11:41:40 +01:00
Wu Fengguang
83712358ba writeback: dirty ratelimit - think time compensation
Compensate the task's think time when computing the final pause time,
so that ->dirty_ratelimit can be executed accurately.

        think time := time spend outside of balance_dirty_pages()

In the rare case that the task slept longer than the 200ms period time
(result in negative pause time), the sleep time will be compensated in
the following periods, too, if it's less than 1 second.

Accumulated errors are carefully avoided as long as the max pause area
is not hitted.

Pseudo code:

        period = pages_dirtied / task_ratelimit;
        think = jiffies - dirty_paused_when;
        pause = period - think;

1) normal case: period > think

        pause = period - think
        dirty_paused_when = jiffies + pause
        nr_dirtied = 0

                             period time
              |===============================>|
                  think time      pause time
              |===============>|==============>|
        ------|----------------|---------------|------------------------
        dirty_paused_when   jiffies

2) no pause case: period <= think

        don't pause; reduce future pause time by:
        dirty_paused_when += period
        nr_dirtied = 0

                           period time
              |===============================>|
                                  think time
              |===================================================>|
        ------|--------------------------------+-------------------|----
        dirty_paused_when                                       jiffies

Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-12-18 14:20:27 +08:00
Wu Fengguang
54848d73f9 writeback: charge leaked page dirties to active tasks
It's a years long problem that a large number of short-lived dirtiers
(eg. gcc instances in a fast kernel build) may starve long-run dirtiers
(eg. dd) as well as pushing the dirty pages to the global hard limit.

The solution is to charge the pages dirtied by the exited gcc to the
other random dirtying tasks. It sounds not perfect, however should
behave good enough in practice, seeing as that throttled tasks aren't
actually running so those that are running are more likely to pick it up
and get throttled, therefore promoting an equal spread.

Randy: fix compile error: 'dirty_throttle_leaks' undeclared in exit.c

Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-12-18 14:20:20 +08:00
Linus Torvalds
ab347d94d6 Merge branches 'perf-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf events: Fix ring_buffer_wakeup() brown paperbag bug

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix select_idle_sibling() regression in selecting an idle SMT sibling
  MAINTAINERS: Update tip.git related git trees
2011-12-17 14:03:50 -08:00
Peter Zijlstra
ab2789213d sched: Fix select_idle_sibling() regression in selecting an idle SMT sibling
Mike Galbraith reported that this recent commit:

   commit 4dcfe1025b
   Author: Peter Zijlstra <peterz@infradead.org>
   Date:   Thu Nov 10 13:01:10 2011 +0100

       sched: Avoid SMT siblings in select_idle_sibling() if possible

stopped selecting an idle SMT sibling when there are no idle
cores in a single socket system.

Intent of the select_idle_sibling() was to fallback to an idle
SMT sibling, if it fails to identify an idle core. But this
fallback was not happening on systems where all the scheduler
domains had `SD_SHARE_PKG_RESOURCES' flag set.

Fix it. Slightly bigger patch of cleaning all these goto's etc
is queued up for the next release.

Reported-by: Mike Galbraith <efault@gmx.de>
Reported-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1323978421.1984.244.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-16 09:44:58 +01:00
Kees Cook
07cde2608a sched: Add missing rcu_dereference() around ->real_parent usage
Wrap another ->real_parent dereference while under rcu_read_lock.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Link: http://lkml.kernel.org/r/20111215164918.GA13003@www.outflux.net
[ tidied up the changelog ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-16 09:42:09 +01:00
Martin Schwidefsky
648616343c [S390] cputime: add sparse checking and cleanup
Make cputime_t and cputime64_t nocast to enable sparse checking to
detect incorrect use of cputime. Drop the cputime macros for simple
scalar operations. The conversion macros are still needed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-15 14:56:19 +01:00
Ingo Molnar
6a54aebf69 Merge commit 'v3.2-rc5' into sched/core
Merge reason: Pick up the latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-15 08:21:30 +01:00
Kay Sievers
d369a5d8fc clocksource: convert sysdev_class to a regular subsystem
After all sysdev classes are ported to regular driver core entities, the
sysdev implementation will be entirely removed from the kernel.

Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-14 15:28:51 -08:00
Kay Sievers
997d3eaf02 rtmutex-tester: convert sysdev_class to a regular subsystem
After all sysdev classes are ported to regular driver core entities, the
sysdev implementation will be entirely removed from the kernel.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-14 14:54:22 -08:00
Will Deacon
44b7f4b98d perf events: Fix ring_buffer_wakeup() brown paperbag bug
Commit 10c6db11 ("perf: Fix loss of notification with multi-event")
seems to unconditionally dereference event->rb in the wakeup handler,
this is wrong, there might not be a buffer attached.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111213152651.GP20297@mudshark.cambridge.arm.com
[ minor edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-14 08:44:53 +01:00
Tejun Heo
b2efa05265 block, cfq: unlink cfq_io_context's immediately
cic is association between io_context and request_queue.  A cic is
linked from both ioc and q and should be destroyed when either one
goes away.  As ioc and q both have their own locks, locking becomes a
bit complex - both orders work for removal from one but not from the
other.

Currently, cfq tries to circumvent this locking order issue with RCU.
ioc->lock nests inside queue_lock but the radix tree and cic's are
also protected by RCU allowing either side to walk their lists without
grabbing lock.

This rather unconventional use of RCU quickly devolves into extremely
fragile convolution.  e.g. The following is from cfqd going away too
soon after ioc and q exits raced.

 general protection fault: 0000 [#1] PREEMPT SMP
 CPU 2
 Modules linked in:
 [   88.503444]
 Pid: 599, comm: hexdump Not tainted 3.1.0-rc10-work+ #158 Bochs Bochs
 RIP: 0010:[<ffffffff81397628>]  [<ffffffff81397628>] cfq_exit_single_io_context+0x58/0xf0
 ...
 Call Trace:
  [<ffffffff81395a4a>] call_for_each_cic+0x5a/0x90
  [<ffffffff81395ab5>] cfq_exit_io_context+0x15/0x20
  [<ffffffff81389130>] exit_io_context+0x100/0x140
  [<ffffffff81098a29>] do_exit+0x579/0x850
  [<ffffffff81098d5b>] do_group_exit+0x5b/0xd0
  [<ffffffff81098de7>] sys_exit_group+0x17/0x20
  [<ffffffff81b02f2b>] system_call_fastpath+0x16/0x1b

The only real hot path here is cic lookup during request
initialization and avoiding extra locking requires very confined use
of RCU.  This patch makes cic removal from both ioc and request_queue
perform double-locking and unlink immediately.

* From q side, the change is almost trivial as ioc->lock nests inside
  queue_lock.  It just needs to grab each ioc->lock as it walks
  cic_list and unlink it.

* From ioc side, it's a bit more difficult because of inversed lock
  order.  ioc needs its lock to walk its cic_list but can't grab the
  matching queue_lock and needs to perform unlock-relock dancing.

  Unlinking is now wholly done from put_io_context() and fast path is
  optimized by using the queue_lock the caller already holds, which is
  by far the most common case.  If the ioc accessed multiple devices,
  it tries with trylock.  In unlikely cases of fast path failure, it
  falls back to full double-locking dance from workqueue.

Double-locking isn't the prettiest thing in the world but it's *far*
simpler and more understandable than RCU trick without adding any
meaningful overhead.

This still leaves a lot of now unnecessary RCU logics.  Future patches
will trim them.

-v2: Vivek pointed out that cic->q was being dereferenced after
     cic->release() was called.  Updated to use local variable @this_q
     instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:39 +01:00
Tejun Heo
6e736be7f2 block: make ioc get/put interface more conventional and fix race on alloction
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio().  The former is
always called from local task while the latter can be called from
different task.  The synchornization between them are peculiar and
dubious.

* current_io_context() doesn't grab task_lock() and assumes that if it
  saw %NULL ->io_context, it would stay that way until allocation and
  assignment is complete.  It has smp_wmb() between alloc/init and
  assignment.

* set_task_ioprio() grabs task_lock() for assignment and does
  smp_read_barrier_depends() between "ioc = task->io_context" and "if
  (ioc)".  Unfortunately, this doesn't achieve anything - the latter
  is not a dependent load of the former.  ie, if ioc itself were being
  dereferenced "ioc->xxx", it would mean something (not sure what tho)
  but as the code currently stands, the dependent read barrier is
  noop.

As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.

Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.

ioc get/put doesn't have any reason to be complex.  The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive.  All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.

This patch updates ioc get/put so that it becomes more conventional.

* alloc_io_context() is replaced with get_task_io_context().  This is
  the only interface which can acquire access to ioc of another task.
  On return, the caller has an explicit reference to the object which
  should be put using put_io_context() afterwards.

* The functionality of current_io_context() remains the same but when
  creating a new ioc, it shares the code path with
  get_task_io_context() and always goes through task_lock().

* get_io_context() now means incrementing ref on an ioc which the
  caller already has access to (be that an explicit refcnt or implicit
  %current one).

* PF_EXITING inhibits creation of new io_context and once
  exit_io_context() is finished, it's guaranteed that both ioc
  acquisition functions return %NULL.

* All users are updated.  Most are trivial but
  smp_read_barrier_depends() removal from cfq_get_io_context() needs a
  bit of explanation.  I suppose the original intention was to ensure
  ioc->ioprio is visible when set_task_ioprio() allocates new
  io_context and installs it; however, this wouldn't have worked
  because set_task_ioprio() doesn't have wmb between init and install.
  There are other problems with this which will be fixed in another
  patch.

* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
  specification.

-v2: Vivek spotted contamination from debug patch.  Removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:38 +01:00
Davidlohr Bueso
52dcf8a1f8 resource cgroups: remove bogus cast
The memparse() function already accepts const char * as the parsing string.

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2011-12-13 07:43:08 -08:00
Tejun Heo
494c167cf7 cgroup: kill subsys->can_attach_task(), pre_attach() and attach_task()
These three methods are no longer used.  Kill them.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul Menage <paul@paulmenage.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
2011-12-12 18:12:22 -08:00
Tejun Heo
94196f51c1 cgroup, cpuset: don't use ss->pre_attach()
->pre_attach() is supposed to be called before migration, which is
observed during process migration but task migration does it the other
way around.  The only ->pre_attach() user is cpuset which can do the
same operaitons in ->can_attach().  Collapse cpuset_pre_attach() into
cpuset_can_attach().

-v2: Patch contamination from later patch removed.  Spotted by Paul
     Menage.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul Menage <paul@paulmenage.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
2011-12-12 18:12:22 -08:00
Tejun Heo
bb9d97b6df cgroup: don't use subsys->can_attach_task() or ->attach_task()
Now that subsys->can_attach() and attach() take @tset instead of
@task, they can handle per-task operations.  Convert
->can_attach_task() and ->attach_task() users to use ->can_attach()
and attach() instead.  Most converions are straight-forward.
Noteworthy changes are,

* In cgroup_freezer, remove unnecessary NULL assignments to unused
  methods.  It's useless and very prone to get out of sync, which
  already happened.

* In cpuset, PF_THREAD_BOUND test is checked for each task.  This
  doesn't make any practical difference but is conceptually cleaner.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: James Morris <jmorris@namei.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
2011-12-12 18:12:21 -08:00
Tejun Heo
2f7ee5691e cgroup: introduce cgroup_taskset and use it in subsys->can_attach(), cancel_attach() and attach()
Currently, there's no way to pass multiple tasks to cgroup_subsys
methods necessitating the need for separate per-process and per-task
methods.  This patch introduces cgroup_taskset which can be used to
pass multiple tasks and their associated cgroups to cgroup_subsys
methods.

Three methods - can_attach(), cancel_attach() and attach() - are
converted to use cgroup_taskset.  This unifies passed parameters so
that all methods have access to all information.  Conversions in this
patchset are identical and don't introduce any behavior change.

-v2: documentation updated as per Paul Menage's suggestion.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul Menage <paul@paulmenage.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: James Morris <jmorris@namei.org>
2011-12-12 18:12:21 -08:00
Tejun Heo
134d33737f cgroup: improve old cgroup handling in cgroup_attach_proc()
cgroup_attach_proc() behaves differently from cgroup_attach_task() in
the following aspects.

* All hooks are invoked even if no task is actually being moved.

* ->can_attach_task() is called for all tasks in the group whether the
  new cgrp is different from the current cgrp or not; however,
  ->attach_task() is skipped if new equals new.  This makes the calls
  asymmetric.

This patch improves old cgroup handling in cgroup_attach_proc() by
looking up the current cgroup at the head, recording it in the flex
array along with the task itself, and using it to remove the above two
differences.  This will also ease further changes.

-v2: nr_todo renamed to nr_migrating_tasks as per Paul Menage's
     suggestion.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul Menage <paul@paulmenage.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
2011-12-12 18:12:21 -08:00
Tejun Heo
cd3d095275 cgroup: always lock threadgroup during migration
Update cgroup to take advantage of the fack that threadgroup_lock()
guarantees stable threadgroup.

* Lock threadgroup even if the target is a single task.  This
  guarantees that when the target tasks stay stable during migration
  regardless of the target type.

* Remove PF_EXITING early exit optimization from attach_task_by_pid()
  and check it in cgroup_task_migrate() instead.  The optimization was
  for rather cold path to begin with and PF_EXITING state can be
  trusted throughout migration by checking it after locking
  threadgroup.

* Don't add PF_EXITING tasks to target task array in
  cgroup_attach_proc().  This ensures that task migration is performed
  only for live tasks.

* Remove -ESRCH failure path from cgroup_task_migrate().  With the
  above changes, it's guaranteed to be called only for live tasks.

After the changes, only live tasks are migrated and they're guaranteed
to stay alive until migration is complete.  This removes problems
caused by exec and exit racing against cgroup migration including
symmetry among cgroup attach methods and different cgroup methods
racing each other.

v2: Oleg pointed out that one more PF_EXITING check can be removed
    from cgroup_attach_proc().  Removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Menage <paul@paulmenage.org>
2011-12-12 18:12:21 -08:00
Tejun Heo
77e4ef99d1 threadgroup: extend threadgroup_lock() to cover exit and exec
threadgroup_lock() protected only protected against new addition to
the threadgroup, which was inherently somewhat incomplete and
problematic for its only user cgroup.  On-going migration could race
against exec and exit leading to interesting problems - the symmetry
between various attach methods, task exiting during method execution,
->exit() racing against attach methods, migrating task switching basic
properties during exec and so on.

This patch extends threadgroup_lock() such that it protects against
all three threadgroup altering operations - fork, exit and exec.  For
exit, threadgroup_change_begin/end() calls are added to exit_signals
around assertion of PF_EXITING.  For exec, threadgroup_[un]lock() are
updated to also grab and release cred_guard_mutex.

With this change, threadgroup_lock() guarantees that the target
threadgroup will remain stable - no new task will be added, no new
PF_EXITING will be set and exec won't happen.

The next patch will update cgroup so that it can take full advantage
of this change.

-v2: beefed up comment as suggested by Frederic.

-v3: narrowed scope of protection in exit path as suggested by
     Frederic.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-12 18:12:21 -08:00
Tejun Heo
257058ae2b threadgroup: rename signal->threadgroup_fork_lock to ->group_rwsem
Make the following renames to prepare for extension of threadgroup
locking.

* s/signal->threadgroup_fork_lock/signal->group_rwsem/
* s/threadgroup_fork_read_lock()/threadgroup_change_begin()/
* s/threadgroup_fork_read_unlock()/threadgroup_change_end()/
* s/threadgroup_fork_write_lock()/threadgroup_lock()/
* s/threadgroup_fork_write_unlock()/threadgroup_unlock()/

This patch doesn't cause any behavior change.

-v2: Rename threadgroup_change_done() to threadgroup_change_end() per
     KAMEZAWA's suggestion.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Menage <paul@paulmenage.org>
2011-12-12 18:12:21 -08:00
Tejun Heo
e25e2cbb4c cgroup: add cgroup_root_mutex
cgroup wants to make threadgroup stable while modifying cgroup
hierarchies which will introduce locking dependency on
cred_guard_mutex from cgroup_mutex.  This unfortunately completes
circular dependency.

 A. cgroup_mutex -> cred_guard_mutex -> s_type->i_mutex_key -> namespace_sem
 B. namespace_sem -> cgroup_mutex

B is from cgroup_show_options() and this patch breaks it by
introducing another mutex cgroup_root_mutex which nests inside
cgroup_mutex and protects cgroupfs_root.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
2011-12-12 18:12:21 -08:00
Paul E. McKenney
a513f6bab0 cpu: Export cpu_up()
Building rcutorture as a module requires cpu_up() as well as cpu_down()
exported, so apply EXPORT_SYMBOL_GPL().

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-12 15:55:15 -08:00
Paul E. McKenney
4f89b336fd rcu: Apply ACCESS_ONCE() to rcu_boost() return value
Both TINY_RCU's and TREE_RCU's implementations of rcu_boost() access
the ->boost_tasks and ->exp_tasks fields without preventing concurrent
changes to these fields.  This commit therefore applies ACCESS_ONCE in
order to prevent compiler mischief.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:33:19 -08:00
Paul E. McKenney
70321d447a Revert "rcu: Permit rt_mutex_unlock() with irqs disabled"
This reverts commit 5342e269b2.

The approach taken in this patch was deemed too abusive to mutexes,
and thus too likely to result in maintenance problems in the future.
Instead, we will disallow RCU read-side critical sections that partially
overlap with interrupt-disbled code segments.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:33:18 -08:00
Paul E. McKenney
4968c300e1 rcu: Augment rcu_batch_end tracing for idle and callback state
The current rcu_batch_end event trace records only the name of the RCU
flavor and the total number of callbacks that remain queued on the
current CPU.  This is insufficient for testing and tuning the new
dyntick-idle RCU_FAST_NO_HZ code, so this commit adds idle state along
with whether or not any of the callbacks that were ready to invoke
at the beginning of rcu_do_batch() are still queued.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:22 -08:00
Paul E. McKenney
101db7b41d rcu: Add rcutorture tests for srcu_read_lock_raw()
This commit adds simple rcutorture tests for srcu_read_lock_raw() and
srcu_read_unlock_raw().  It does not test doing srcu_read_lock_raw()
in an exception handler and releasing it in the corresponding process
context.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:21 -08:00
Paul E. McKenney
f220242af9 rcu: Make rcutorture test for hotpluggability before offlining CPUs
The rcutorture test now can automatically exercise CPU hotplug and
collect success statistics, which can be correlated with other rcutorture
activity.  This permits rcutorture to completely exercise RCU regardless
of what sort of userspace and filesystem layout is in use.  Unfortunately,
rcutorture is happy to attempt to offline CPUs that cannot be offlined,
for example, CPU 0 in both the x86 and ARM architectures.  Although this
allows rcutorture testing to proceed normally, it confounds attempts at
error analysis due to the resulting flood of spurious CPU-hotplug errors.

Therefore, this commit uses the new cpu_is_hotpluggable() function to
avoid attempting to offline CPUs that are not hotpluggable, which in
turn avoids spurious CPU-hotplug errors.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:21 -08:00
Paul E. McKenney
2d1dc9a600 rcu: Remove redundant rcu_cpu_stall_suppress declaration
No point in having two identical rcu_cpu_stall_suppress declarations,
so remove the more obscure of the two.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:11 -08:00
Paul E. McKenney
f23f7fa1c8 rcu: Adaptive dyntick-idle preparation
If there are other CPUs active at a given point in time, then there is a
limit to what a given CPU can do to advance the current RCU grace period.
Beyond this limit, attempting to force the RCU grace period forward will
do nothing but consume energy burning CPU cycles.

Therefore, this commit takes an adaptive approach to RCU_FAST_NO_HZ
preparations for idle.  It pushes the RCU core state machine for
two cycles unconditionally, and then it will push from zero to three
additional cycles, but only as long as the RCU core has work for this
CPU to do immediately.  The rcu_pending() function is used to check
whether the RCU core has such work.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:10 -08:00
Paul E. McKenney
dff1672d91 rcu: Keep invoking callbacks if CPU otherwise idle
The rcu_do_batch() function that invokes callbacks for TREE_RCU and
TREE_PREEMPT_RCU normally throttles callback invocation to avoid degrading
scheduling latency.  However, as long as the CPU would otherwise be idle,
there is no downside to continuing to invoke any callbacks that have passed
through their grace periods.  In fact, processing such callbacks in a
timely manner has the benefit of increasing the probability that the
CPU can enter the power-saving dyntick-idle mode.

Therefore, this commit allows callback invocation to continue beyond the
preset limit as long as the scheduler does not have some other task to
run and as long as context is that of the idle task or the relevant
RCU kthread.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:09 -08:00
Frederic Weisbecker
facc4e1596 rcu: Irq nesting is always 0 on rcu_enter_idle_common
Because tasks don't nest, the ->dyntick_nesting must always be zero upon
entry to rcu_idle_enter_common().  Therefore, pass "0" rather than the
counter itself.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:08 -08:00
Frederic Weisbecker
b6fc602014 rcu: Don't check irq nesting from rcu idle entry/exit
Because tasks do not nest, rcu_idle_enter() and rcu_idle_exit() do
not need to check for nesting.  This commit therefore moves nesting
checks from rcu_idle_enter_common() to rcu_irq_exit() and from
rcu_idle_exit_common() to rcu_irq_enter().

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:07 -08:00
Paul E. McKenney
7cb9249900 rcu: Permit dyntick-idle with callbacks pending
The current implementation of RCU_FAST_NO_HZ prevents CPUs from entering
dyntick-idle state if they have RCU callbacks pending.  Unfortunately,
this has the side-effect of often preventing them from entering this
state, especially if at least one other CPU is not in dyntick-idle state.
However, the resulting per-tick wakeup is wasteful in many cases: if the
CPU has already fully responded to the current RCU grace period, there
will be nothing for it to do until this grace period ends, which will
frequently take several jiffies.

This commit therefore permits a CPU that has done everything that the
current grace period has asked of it (rcu_pending() == 0) even if it
still as RCU callbacks pending.  However, such a CPU posts a timer to
wake it up several jiffies later (6 jiffies, based on experience with
grace-period lengths).  This wakeup is required to handle situations
that can result in all CPUs being in dyntick-idle mode, thus failing
to ever complete the current grace period.  If a CPU wakes up before
the timer goes off, then it cancels that timer, thus avoiding spurious
wakeups.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:07 -08:00
Paul E. McKenney
f0e7c19db8 rcu: Identify dyntick-idle CPUs on first force_quiescent_state() pass
Fixes and workarounds for a number of issues (for example, that in
df4012edc) make it safe to once again detect dyntick-idle CPUs on the
first pass of force_quiescent_state(), so this commit makes that change.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:05 -08:00
Paul E. McKenney
c92b131bdc rcu: Remove dynticks false positives and RCU failures
Assertions in rcu_init_percpu_data() unknowingly relied on outgoing
CPUs being turned off before reaching the idle loop.  Unfortunately,
when running under kvm/qemu on x86, CPUs really can get to idle before
begin shut off.  These CPUs are then born in dyntick-idle mode from an
RCU perspective, which results in splats in rcu_init_percpu_data() and
in RCU wrongly ignoring those CPUs despite them being active.  This in
turn can cause RCU to end grace periods prematurely, potentially freeing
up memory that the newly onlined CPUs were still using.  This is most
decidedly not what we need to see in an RCU implementation.

This commit therefore replaces the assertions in rcu_init_percpu_data()
with code that forces RCU's dyntick-idle view of newly onlined CPUs to
match reality.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:04 -08:00
Paul E. McKenney
3ad0decf98 rcu: Reduce latency of rcu_prepare_for_idle()
Re-enable interrupts across calls to quiescent-state functions and
also across force_quiescent_state() to reduce latency.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:03 -08:00
Paul E. McKenney
f535a607c1 rcu: Eliminate RCU_FAST_NO_HZ grace-period hang
With the new implementation of RCU_FAST_NO_HZ, it was possible to hang
RCU grace periods as follows:

o	CPU 0 attempts to go idle, cycles several times through the
	rcu_prepare_for_idle() loop, then goes dyntick-idle when
	RCU needs nothing more from it, while still having at least
	on RCU callback pending.

o	CPU 1 goes idle with no callbacks.

Both CPUs can then stay in dyntick-idle mode indefinitely, preventing
the RCU grace period from ever completing, possibly hanging the system.

This commit therefore prevents CPUs that have RCU callbacks from entering
dyntick-idle mode.  This approach also eliminates the need for the
end-of-grace-period IPIs used previously.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:02 -08:00
Paul E. McKenney
84ad00cb61 rcu: Avoid needlessly IPIing CPUs at GP end
If a CPU enters dyntick-idle mode with callbacks pending, it will need
an IPI at the end of the grace period.  However, if it exits dyntick-idle
mode before the grace period ends, it will be needlessly IPIed at the
end of the grace period.

Therefore, this commit clears the per-CPU rcu_awake_at_gp_end flag
when a CPU determines that it does not need it.  This in turn requires
disabling interrupts across much of rcu_prepare_for_idle() in order to
avoid having nested interrupts clearing this state out from under us.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:01 -08:00
Paul E. McKenney
3084f2f80c rcu: Go dyntick-idle more quickly if CPU has serviced current grace period
The earlier version would attempt to push callbacks through five times
before going into dyntick-idle mode if callbacks remained, but the CPU
had done all that it needed to do for the current RCU grace periods.
This is wasteful:  In most cases, once the CPU has done all that it
needs to for the current RCU grace periods, it will make no further
progress on the callbacks no matter how many times it loops through
the RCU core processing and the idle-entry code.

This commit therefore goes to dyntick-idle mode whenever the current
CPU has done all it can for the current grace period.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:00 -08:00
Paul E. McKenney
433cdddcd9 rcu: Add tracing for RCU_FAST_NO_HZ
This commit adds trace_rcu_prep_idle(), which is invoked from
rcu_prepare_for_idle() and rcu_wake_cpu() to trace attempts on
the part of RCU to force CPUs into dyntick-idle mode.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:32:00 -08:00
Frederic Weisbecker
1268fbc746 nohz: Remove tick_nohz_idle_enter_norcu() / tick_nohz_idle_exit_norcu()
Those two APIs were provided to optimize the calls of
tick_nohz_idle_enter() and rcu_idle_enter() into a single
irq disabled section. This way no interrupt happening in-between would
needlessly process any RCU job.

Now we are talking about an optimization for which benefits
have yet to be measured. Let's start simple and completely decouple
idle rcu and dyntick idle logics to simplify.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:57 -08:00
Paul E. McKenney
b58bdccaa8 rcu: Add rcutorture CPU-hotplug capability
Running CPU-hotplug operations concurrently with rcutorture has
historically been a good way to find bugs in both RCU and CPU hotplug.
This commit therefore adds an rcutorture module parameter called
"onoff_interval" that causes a randomly selected CPU-hotplug operation to
be executed at the specified interval, in seconds.  The default value of
"onoff_interval" is zero, which disables rcutorture-instigated CPU-hotplug
operations.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:56 -08:00
Paul E. McKenney
77aeeebd7b events: Make events use the new is_idle_task() API
Change from direct comparison of ->pid with zero to is_idle_task().

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:54 -08:00
Paul E. McKenney
7fc20c5cbd kdb: Make KDB use the new is_idle_task() API
Change from direct comparison of ->pid with zero to is_idle_task().

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:52 -08:00
Paul E. McKenney
99745b6a83 rcu: Make RCU use the new is_idle_task() API
Change from direct comparison of ->pid with zero to is_idle_task().

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:48 -08:00
Paul E. McKenney
bb3bf7052d rcu: Control rcutorture startup from kernel boot parameters
Currently, if rcutorture is built into the kernel, it must be manually
started or started from an init script.  This is inconvenient for
automated KVM testing, where it is good to be able to fully control
rcutorture execution from the kernel parameters.  This patch therefore
adds a module parameter named "rcutorture_runnable" that defaults
to zero ("don't start automatically"), but which can be set to one
to cause rcutorture to start up immediately during boot.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:47 -08:00
Paul E. McKenney
d5f546d834 rcu: Add rcutorture system-shutdown capability
Although it is easy to run rcutorture tests under KVM, there is currently
no nice way to run such a test for a fixed time period, collect all of
the rcutorture data, and then shut the system down cleanly.  This commit
therefore adds an rcutorture module parameter named "shutdown_secs" that
specified the run duration in seconds, after which rcutorture terminates
the test and powers the system down.  The default value for "shutdown_secs"
is zero, which disables shutdown.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:46 -08:00
Paul E. McKenney
11dbaa8cb7 rcu: Fix idle-task checks
RCU has traditionally relied on idle_cpu() to determine whether a given
CPU is running in the context of an idle task, but commit 908a3283
(Fix idle_cpu()) has invalidated this approach.  After commit 908a3283,
idle_cpu() will return true if the current CPU is currently running the
idle task, and will be doing so for the foreseeable future.  RCU instead
needs to know whether or not the current CPU is currently running the
idle task, regardless of what the near future might bring.

This commit therefore switches from idle_cpu() to "current->pid != 0".

Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Suggested-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:44 -08:00
Paul E. McKenney
aea1b35e29 rcu: Allow dyntick-idle mode for CPUs with callbacks
Currently, RCU does not permit a CPU to enter dyntick-idle mode if that
CPU has any RCU callbacks queued.  This means that workloads for which
each CPU wakes up and does some RCU updates every few ticks will never
enter dyntick-idle mode.  This can result in significant unnecessary power
consumption, so this patch permits a given to enter dyntick-idle mode if
it has callbacks, but only if that same CPU has completed all current
work for the RCU core.  We determine use rcu_pending() to determine
whether a given CPU has completed all current work for the RCU core.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:43 -08:00
Paul E. McKenney
0989cb4678 rcu: Add more information to the wrong-idle-task complaint
The current code just complains if the current task is not the idle task.
This commit therefore adds printing of the identity of the idle task.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:42 -08:00
Paul E. McKenney
4145fa7fbe rcu: Deconfuse dynticks entry-exit tracing
The trace_rcu_dyntick() trace event did not print both the old and
the new value of the nesting level, and furthermore printed only
the low-order 32 bits of it.  This could result in some confusion
when interpreting trace-event dumps, so this commit prints both
the old and the new value, prints the full 64 bits, and also selects
the process-entry/exit increment to print nicely in hexadecimal.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:42 -08:00
Frederic Weisbecker
416eb33cd6 rcu: Fix early call to rcu_idle_enter()
On the irq exit path, tick_nohz_irq_exit()
may raise a softirq, which action leads to the wake up
path and select_task_rq_fair() that makes use of rcu
to iterate the domains.

This is an illegal use of RCU because we may be in RCU
extended quiescent state if we interrupted an RCU-idle
window in the idle loop:

[  132.978883] ===============================
[  132.978883] [ INFO: suspicious RCU usage. ]
[  132.978883] -------------------------------
[  132.978883] kernel/sched_fair.c:1707 suspicious rcu_dereference_check() usage!
[  132.978883]
[  132.978883] other info that might help us debug this:
[  132.978883]
[  132.978883]
[  132.978883] rcu_scheduler_active = 1, debug_locks = 0
[  132.978883] RCU used illegally from extended quiescent state!
[  132.978883] 2 locks held by swapper/0:
[  132.978883]  #0:  (&p->pi_lock){-.-.-.}, at: [<ffffffff8105a729>] try_to_wake_up+0x39/0x2f0
[  132.978883]  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff8105556a>] select_task_rq_fair+0x6a/0xec0
[  132.978883]
[  132.978883] stack backtrace:
[  132.978883] Pid: 0, comm: swapper Tainted: G        W   3.0.0+ #178
[  132.978883] Call Trace:
[  132.978883]  <IRQ>  [<ffffffff810a01f6>] lockdep_rcu_suspicious+0xe6/0x100
[  132.978883]  [<ffffffff81055c49>] select_task_rq_fair+0x749/0xec0
[  132.978883]  [<ffffffff8105556a>] ? select_task_rq_fair+0x6a/0xec0
[  132.978883]  [<ffffffff812fe494>] ? do_raw_spin_lock+0x54/0x150
[  132.978883]  [<ffffffff810a1f2d>] ? trace_hardirqs_on+0xd/0x10
[  132.978883]  [<ffffffff8105a7c3>] try_to_wake_up+0xd3/0x2f0
[  132.978883]  [<ffffffff81094f98>] ? ktime_get+0x68/0xf0
[  132.978883]  [<ffffffff8105aa35>] wake_up_process+0x15/0x20
[  132.978883]  [<ffffffff81069dd5>] raise_softirq_irqoff+0x65/0x110
[  132.978883]  [<ffffffff8108eb65>] __hrtimer_start_range_ns+0x415/0x5a0
[  132.978883]  [<ffffffff812fe3ee>] ? do_raw_spin_unlock+0x5e/0xb0
[  132.978883]  [<ffffffff8108ed08>] hrtimer_start+0x18/0x20
[  132.978883]  [<ffffffff8109c9c3>] tick_nohz_stop_sched_tick+0x393/0x450
[  132.978883]  [<ffffffff810694f2>] irq_exit+0xd2/0x100
[  132.978883]  [<ffffffff81829e96>] do_IRQ+0x66/0xe0
[  132.978883]  [<ffffffff81820d53>] common_interrupt+0x13/0x13
[  132.978883]  <EOI>  [<ffffffff8103434b>] ? native_safe_halt+0xb/0x10
[  132.978883]  [<ffffffff810a1f2d>] ? trace_hardirqs_on+0xd/0x10
[  132.978883]  [<ffffffff810144ea>] default_idle+0xba/0x370
[  132.978883]  [<ffffffff810147fe>] amd_e400_idle+0x5e/0x130
[  132.978883]  [<ffffffff8100a9f6>] cpu_idle+0xb6/0x120
[  132.978883]  [<ffffffff817f217f>] rest_init+0xef/0x150
[  132.978883]  [<ffffffff817f20e2>] ? rest_init+0x52/0x150
[  132.978883]  [<ffffffff81ed9cf3>] start_kernel+0x3da/0x3e5
[  132.978883]  [<ffffffff81ed9346>] x86_64_start_reservations+0x131/0x135
[  132.978883]  [<ffffffff81ed944d>] x86_64_start_kernel+0x103/0x112

Fix this by calling rcu_idle_enter() after tick_nohz_irq_exit().

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:38 -08:00
Frederic Weisbecker
2bbb6817c0 nohz: Allow rcu extended quiescent state handling seperately from tick stop
It is assumed that rcu won't be used once we switch to tickless
mode and until we restart the tick. However this is not always
true, as in x86-64 where we dereference the idle notifiers after
the tick is stopped.

To prepare for fixing this, add two new APIs:
tick_nohz_idle_enter_norcu() and tick_nohz_idle_exit_norcu().

If no use of RCU is made in the idle loop between
tick_nohz_enter_idle() and tick_nohz_exit_idle() calls, the arch
must instead call the new *_norcu() version such that the arch doesn't
need to call rcu_idle_enter() and rcu_idle_exit().

Otherwise the arch must call tick_nohz_enter_idle() and
tick_nohz_exit_idle() and also call explicitly:

- rcu_idle_enter() after its last use of RCU before the CPU is put
to sleep.
- rcu_idle_exit() before the first use of RCU after the CPU is woken
up.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:36 -08:00
Frederic Weisbecker
280f06774a nohz: Separate out irq exit and idle loop dyntick logic
The tick_nohz_stop_sched_tick() function, which tries to delay
the next timer tick as long as possible, can be called from two
places:

- From the idle loop to start the dytick idle mode
- From interrupt exit if we have interrupted the dyntick
idle mode, so that we reprogram the next tick event in
case the irq changed some internal state that requires this
action.

There are only few minor differences between both that
are handled by that function, driven by the ts->inidle
cpu variable and the inidle parameter. The whole guarantees
that we only update the dyntick mode on irq exit if we actually
interrupted the dyntick idle mode, and that we enter in RCU extended
quiescent state from idle loop entry only.

Split this function into:

- tick_nohz_idle_enter(), which sets ts->inidle to 1, enters
dynticks idle mode unconditionally if it can, and enters into RCU
extended quiescent state.

- tick_nohz_irq_exit() which only updates the dynticks idle mode
when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called).

To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed
into tick_nohz_idle_exit().

This simplifies the code and micro-optimize the irq exit path (no need
for local_irq_save there). This also prepares for the split between
dynticks and rcu extended quiescent state logics. We'll need this split to
further fix illegal uses of RCU in extended quiescent states in the idle
loop.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:35 -08:00
Frederic Weisbecker
0464e93748 rcu: Inform the user about extended quiescent state on PROVE_RCU warning
Inform the user if an RCU usage error is detected by lockdep while in
an extended quiescent state (in this case, the RCU-free window in idle).
This is accomplished by adding a line to the RCU lockdep splat indicating
whether or not the splat occurred in extended quiescent state.

Uses of RCU from within extended quiescent state mode are totally ignored
by RCU, hence the importance of this diagnostic.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:30 -08:00
Frederic Weisbecker
e6b80a3b09 rcu: Detect illegal rcu dereference in extended quiescent state
Report that none of the rcu read lock maps are held while in an RCU
extended quiescent state (the section between rcu_idle_enter()
and rcu_idle_exit()). This helps detect any use of rcu_dereference()
and friends from within the section in idle where RCU is not allowed.

This way we can guarantee an extended quiescent window where the CPU
can be put in dyntick idle mode or can simply aoid to be part of any
global grace period completion while in the idle loop.

Uses of RCU from such mode are totally ignored by RCU, hence the
importance of these checks.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:30 -08:00
Thomas Gleixner
a0f8eefb12 rcu: Remove redundant return from rcu_report_exp_rnp()
Empty void functions do not need "return", so this commit removes it
from rcu_report_exp_rnp().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:29 -08:00
Thomas Gleixner
b40d293eb3 rcu: Omit self-awaken when setting up expedited grace period
When setting up an expedited grace period, if there were no readers, the
task will awaken itself.  This commit removes this useless self-awakening.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:28 -08:00
Paul E. McKenney
34240697d6 rcu: Disable preemption in rcu_is_cpu_idle()
Because rcu_is_cpu_idle() is to be used to check for extended quiescent
states in RCU-preempt read-side critical sections, it cannot assume that
preemption is disabled.  And preemption must be disabled when accessing
the dyntick-idle state, because otherwise the following sequence of events
could occur:

1.	Task A on CPU 1 enters rcu_is_cpu_idle() and picks up the pointer
	to CPU 1's per-CPU variables.

2.	Task B preempts Task A and starts running on CPU 1.

3.	Task A migrates to CPU 2.

4.	Task B blocks, leaving CPU 1 idle.

5.	Task A continues execution on CPU 2, accessing CPU 1's dyntick-idle
	information using the pointer fetched in step 1 above, and finds
	that CPU 1 is idle.

6.	Task A therefore incorrectly concludes that it is executing in
	an extended quiescent state, possibly issuing a spurious splat.

Therefore, this commit disables preemption within the rcu_is_cpu_idle()
function.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:27 -08:00
Paul E. McKenney
91afaf3002 rcu: Add failure tracing to rcutorture
Trace the rcutorture RCU accesses and dump the trace buffer when the
first failure is detected.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:26 -08:00
Paul E. McKenney
a8eecf2248 trace: Allow ftrace_dump() to be called from modules
Add an EXPORT_SYMBOL_GPL() so that rcutorture can dump the trace buffer
upon detection of an RCU error.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:25 -08:00
Paul E. McKenney
9b2e4f1880 rcu: Track idleness independent of idle tasks
Earlier versions of RCU used the scheduling-clock tick to detect idleness
by checking for the idle task, but handled idleness differently for
CONFIG_NO_HZ=y.  But there are now a number of uses of RCU read-side
critical sections in the idle task, for example, for tracing.  A more
fine-grained detection of idleness is therefore required.

This commit presses the old dyntick-idle code into full-time service,
so that rcu_idle_enter(), previously known as rcu_enter_nohz(), is
always invoked at the beginning of an idle loop iteration.  Similarly,
rcu_idle_exit(), previously known as rcu_exit_nohz(), is always invoked
at the end of an idle-loop iteration.  This allows the idle task to
use RCU everywhere except between consecutive rcu_idle_enter() and
rcu_idle_exit() calls, in turn allowing architecture maintainers to
specify exactly where in the idle loop that RCU may be used.

Because some of the userspace upcall uses can result in what looks
to RCU like half of an interrupt, it is not possible to expect that
the irq_enter() and irq_exit() hooks will give exact counts.  This
patch therefore expands the ->dynticks_nesting counter to 64 bits
and uses two separate bitfields to count process/idle transitions
and interrupt entry/exit transitions.  It is presumed that userspace
upcalls do not happen in the idle loop or from usermode execution
(though usermode might do a system call that results in an upcall).
The counter is hard-reset on each process/idle transition, which
avoids the interrupt entry/exit error from accumulating.  Overflow
is avoided by the 64-bitness of the ->dyntick_nesting counter.

This commit also adds warnings if a non-idle task asks RCU to enter
idle state (and these checks will need some adjustment before applying
Frederic's OS-jitter patches (http://lkml.org/lkml/2011/10/7/246).
In addition, validation of ->dynticks and ->dynticks_nesting is added.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:24 -08:00
Paul E. McKenney
7077714ec4 rcu: Make synchronize_sched_expedited() better at work sharing
When synchronize_sched_expedited() takes its second and subsequent
snapshots of sync_sched_expedited_started, it subtracts 1.  This
means that the concurrent caller of synchronize_sched_expedited()
that incremented to that value sees our successful completion, it
will not be able to take advantage of it.  This restriction is
pointless, given that our full expedited grace period would have
happened after the other guy started, and thus should be able to
serve as a proxy for the other guy successfully executing
try_stop_cpus().

This commit therefore removes the subtraction of 1.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:22 -08:00
Paul E. McKenney
389abd48ef rcu: Avoid RCU-preempt expedited grace-period botch
Because rcu_read_unlock_special() samples rcu_preempted_readers_exp(rnp)
after dropping rnp->lock, the following sequence of events is possible:

1.	Task A exits its RCU read-side critical section, and removes
	itself from the ->blkd_tasks list, releases rnp->lock, and is
	then preempted.  Task B remains on the ->blkd_tasks list, and
	blocks the current expedited grace period.

2.	Task B exits from its RCU read-side critical section and removes
	itself from the ->blkd_tasks list.  Because it is the last task
	blocking the current expedited grace period, it ends that
	expedited grace period.

3.	Task A resumes, and samples rcu_preempted_readers_exp(rnp) which
	of course indicates that nothing is blocking the nonexistent
	expedited grace period. Task A is again preempted.

4.	Some other CPU starts an expedited grace period.  There are several
	tasks blocking this expedited grace period queued on the
	same rcu_node structure that Task A was using in step 1 above.

5.	Task A examines its state and incorrectly concludes that it was
	the last task blocking the expedited grace period on the current
	rcu_node structure.  It therefore reports completion up the
	rcu_node tree.

6.	The expedited grace period can then incorrectly complete before
	the tasks blocked on this same rcu_node structure exit their
	RCU read-side critical sections.  Arbitrarily bad things happen.

This commit therefore takes a snapshot of rcu_preempted_readers_exp(rnp)
prior to dropping the lock, so that only the last task thinks that it is
the last task, thus avoiding the failure scenario laid out above.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:21 -08:00
Paul E. McKenney
af446b702c rcu: ->signaled better named ->fqs_state
The ->signaled field was named before complications in the form of
dyntick-idle mode and offlined CPUs.  These complications have required
that force_quiescent_state() be implemented as a state machine, instead
of simply unconditionally sending reschedule IPIs.  Therefore, this
commit renames ->signaled to ->fqs_state to catch up with the new
force_quiescent_state() reality.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:20 -08:00
Srivatsa S. Bhat
cf007e3526 PM / Hibernate: Remove deprecated hibernation snapshot ioctls
Several snapshot ioctls were marked for removal quite some time ago,
since they were deprecated. Remove them.

Suggested-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-09 23:37:07 +01:00
Srivatsa S. Bhat
b298d289c7 PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
Commit a144c6a (PM: Print a warning if firmware is requested when tasks
are frozen) introduced usermodehelper_is_disabled() to warn and exit
immediately if firmware is requested when usermodehelpers are disabled.

However, it is racy. Consider the following scenario, currently used in
drivers/base/firmware_class.c:

...
if (usermodehelper_is_disabled())
        goto out;

/* Do actual work */
...

out:
        return err;

Nothing prevents someone from disabling usermodehelpers just after the check
in the 'if' condition, which means that it is quite possible to try doing the
"actual work" with usermodehelpers disabled, leading to undesirable
consequences.

In particular, this race condition in _request_firmware() causes task freezing
failures whenever suspend/hibernation is in progress because, it wrongly waits
to get the firmware/microcode image from userspace when actually the
usermodehelpers are disabled or userspace has been frozen.
Some of the example scenarios that cause freezing failures due to this race
are those that depend on userspace via request_firmware(), such as x86
microcode module initialization and microcode image reload.

Previous discussions about this issue can be found at:
http://thread.gmane.org/gmane.linux.kernel/1198291/focus=1200591

This patch adds proper synchronization to fix this issue.

It is to be noted that this patchset fixes the freezing failures but doesn't
remove the warnings. IOW, it does not attempt to add explicit synchronization
to x86 microcode driver to avoid requesting microcode image at inopportune
moments. Because, the warnings were introduced to highlight such cases, in the
first place. And we need not silence the warnings, since we take care of the
*real* problem (freezing failure) and hence, after that, the warnings are
pretty harmless anyway.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-09 23:36:36 +01:00
Linus Torvalds
975e32c287 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Do no try to schedule task events if there are none
  lockdep, kmemcheck: Annotate ->lock in lockdep_init_map()
  perf header: Use event_name() to get an event name
  perf stat: Failure with "Operation not supported"
2011-12-09 08:07:24 -08:00
Mandeep Singh Baines
031af165b1 sys_getppid: add missing rcu_dereference
In order to safely dereference current->real_parent inside an
rcu_read_lock, we need an rcu_dereference.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-09 07:50:29 -08:00
Peter Zijlstra
09dc3cf93f printk: avoid double lock acquire
Commit 4f2a8d3cf5 ("printk: Fix console_sem vs logbuf_lock unlock race")
introduced another silly bug where we would want to acquire an already
held lock.  Avoid this.

Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-09 07:50:28 -08:00
Srivatsa S. Bhat
bcda53faf5 PM / Sleep: Replace mutex_[un]lock(&pm_mutex) with [un]lock_system_sleep()
Using [un]lock_system_sleep() is safer than directly using mutex_[un]lock()
on 'pm_mutex', since the latter could lead to freezing failures. Hence convert
all the present users of mutex_[un]lock(&pm_mutex) to use these safe APIs
instead.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-08 23:22:29 +01:00
Linus Torvalds
09d9673d53 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimers: Fix time comparison
  ptp: Fix clock_getres() implementation
2011-12-08 13:21:28 -08:00
Peter Zijlstra
067491b731 sched, nohz: Fix missing RCU read lock
Yong Zhang reported:

 > [ INFO: suspicious RCU usage. ]
 > kernel/sched/fair.c:5091 suspicious rcu_dereference_check() usage!

This is due to the sched_domain stuff being RCU protected and
commit 0b005cf5 ("sched, nohz: Implement sched group, domain
aware nohz idle load balancing") overlooking this fact.

The sd variable only lives inside the for_each_domain() block,
so we only need to wrap that.

Reported-by: Yong Zhang <yong.zhang0@gmail.com>
Tested-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1323264728.32012.107.camel@twins
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-08 05:45:48 +01:00
Ben Hutchings
9ec84acee1 lockdep, bug: Exclude TAINT_OOT_MODULE from disabling lock debugging
We do want to allow lock debugging for GPL-compatible modules
that are not (yet) built in-tree.  This was disabled as a
side-effect of commit 2449b8ba07
('module,bug: Add TAINT_OOT_MODULE flag for modules not built
in-tree').  Lock debug warnings now include taint flags, so
kernel developers should still be able to deflect warnings
caused by out-of-tree modules.

The TAINT_PROPRIETARY_MODULE flag for non-GPL-compatible modules
will still disable lock debugging.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Nick Bowler <nbowler@elliptictech.com>
Cc: Greg KH <greg@kroah.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Debian kernel maintainers <debian-kernel@lists.debian.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/1323268258.18450.11.camel@deadeye
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-07 23:32:10 +01:00
Gleb Natapov
86b47c2549 perf: Do no try to schedule task events if there are none
perf_event_sched_in() shouldn't try to schedule task events if there
are none otherwise task's ctx->is_active will be set and will not be
cleared during sched_out. This will prevent newly added events from
being scheduled into the task context.

Fixes a boo-boo in commit 1d5f003f5a ("perf: Do not set task_ctx
pointer in cpuctx if there are no events in the context").

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111122140821.GF2557@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-07 16:31:22 +01:00
Srivatsa S. Bhat
e5b16746f0 PM / Hibernate: Replace unintuitive 'if' condition in kernel/power/user.c with 'else'
In the snapshot_ioctl() function, under SNAPSHOT_FREEZE, the code below
freeze_processes() is a bit unintuitive. Improve it by replacing the
second 'if' condition with an 'else' clause.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-06 22:13:44 +01:00
Rafael J. Wysocki
2e8e89e392 Merge branch 'pm-freezer' into pm-sleep
* pm-freezer: (26 commits)
  Freezer / sunrpc / NFS: don't allow TASK_KILLABLE sleeps to block the freezer
  Freezer: fix more fallout from the thaw_process rename
  freezer: fix wait_event_freezable/__thaw_task races
  freezer: kill unused set_freezable_with_signal()
  dmatest: don't use set_freezable_with_signal()
  usb_storage: don't use set_freezable_with_signal()
  freezer: remove unused @sig_only from freeze_task()
  freezer: use lock_task_sighand() in fake_signal_wake_up()
  freezer: restructure __refrigerator()
  freezer: fix set_freezable[_with_signal]() race
  freezer: remove should_send_signal() and update frozen()
  freezer: remove now unused TIF_FREEZE
  freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE
  cgroup_freezer: prepare for removal of TIF_FREEZE
  freezer: clean up freeze_processes() failure path
  freezer: kill PF_FREEZING
  freezer: test freezable conditions while holding freezer_lock
  freezer: make freezing indicate freeze condition in effect
  freezer: use dedicated lock instead of task_lock() + memory barrier
  freezer: don't distinguish nosig tasks on thaw
  ...
2011-12-06 22:12:50 +01:00
Srivatsa S. Bhat
48580ab872 PM / Hibernate: Remove deprecated hibernation test modes
The hibernation test modes 'test' and 'testproc' are deprecated, because
the 'pm_test' framework offers much more fine-grained control for debugging
suspend and hibernation related problems.

So, remove the deprecated 'test' and 'testproc' hibernation test modes.

Suggested-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-06 22:08:14 +01:00
Srivatsa S. Bhat
97819a2622 PM / Hibernate: Thaw processes in SNAPSHOT_CREATE_IMAGE ioctl test path
Commit 2aede851dd (PM / Hibernate: Freeze
kernel threads after preallocating memory) moved the freezing of kernel
threads to hibernation_snapshot() function.

So now, if the call to hibernation_snapshot() returns early due to a
successful hibernation test, the caller has to thaw processes to ensure
that the system gets back to its original state.

But in SNAPSHOT_CREATE_IMAGE hibernation ioctl, the caller does not thaw
processes in case hibernation_snapshot() returned due to a successful
freezer test. Fix this issue. But note we still send the value of 'in_suspend'
(which is now 0) to userspace, because we are not in an error path per-se,
and moreover, the value of in_suspend correctly depicts the situation here.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-06 22:07:59 +01:00
Srivatsa S. Bhat
0118521cc7 PM / Hibernate: Enable usermodehelpers in software_resume() error path
In the software_resume() function defined in kernel/power/hibernate.c,
if the call to create_basic_memory_bitmaps() fails, the usermodehelpers
are not enabled (which had been disabled in the previous step). Fix it.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-06 22:07:51 +01:00
Linus Torvalds
091c0f86ba Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ftrace: Fix hash record accounting bug
  perf: Fix parsing of __print_flags() in TP_printk()
  jump_label: jump_label_inc may return before the code is patched
  ftrace: Remove force undef config value left for testing
  tracing: Restore system filter behavior
  tracing: fix event_subsystem ref counting
2011-12-06 11:54:33 -08:00
Suresh Siddha
cd490c5b28 sched, nohz: Set the NOHZ_BALANCE_KICK flag for idle load balancer
Intention is to set the NOHZ_BALANCE_KICK flag for the 'ilb_cpu'. Not
for the 'cpu' which is the local cpu. Fix the typo.

Reported-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323199594.1984.18.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 20:51:29 +01:00
Suresh Siddha
8a6d42d1b3 sched, nohz: Fix the idle cpu check in nohz_idle_balance
cpu bit in the nohz.idle_cpu_mask are reset in the first busy tick after
exiting idle. So during nohz_idle_balance(), intention is to double
check if the cpu that is part of the idle_cpu_mask is indeed idle before
going ahead in performing idle balance for that cpu.

Fix the cpu typo in the idle_cpu() check during nohz_idle_balance().

Reported-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323199177.1984.12.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 20:51:27 +01:00
Peter Zijlstra
f8b6d1cc7d sched: Use jump_labels for sched_feat
Now that we initialize jump_labels before sched_init() we can use them
for the debug features without having to worry about a window where
they have the wrong setting.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-vpreo4hal9e0kzqmg5y0io2k@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 20:51:26 +01:00
Glauber Costa
be726ffd1e sched/accounting: Fix parameter passing in task_group_account_field
The order of parameters is inverted. The index parameter
should come first.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322863119-14225-3-git-send-email-glommer@parallels.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 20:51:24 +01:00
Glauber Costa
1c77f38ad6 sched/accounting: Fix user/system tick double accounting
Now that we're  pointing cpuacct's root cgroup to cpustat and accounting
through task_group_account_field(), we should not access cpustat directly.
Since it is done anyway inside the acessor function, we end up accounting
it twice, which is wrong.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322863119-14225-2-git-send-email-glommer@parallels.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 20:51:23 +01:00
Glauber Costa
54c707e98d sched/accounting: Re-use scheduler statistics for the root cgroup
Right now, after we collect tick statistics for user and system and store them
in a well known location, we keep the same statistics again for cpuacct.
Since cpuacct is hierarchical, the numbers for the root cgroup should be
absolutely equal to the system-wide numbers.

So it would be better to just use it: this patch changes cpuacct accounting
in a way that the cpustat statistics are kept in a struct kernel_cpustat percpu
array. In the root cgroup case, we just point it to the main array. The rest of
the hierarchy walk can be totally disabled later with a static branch - but I am
not doing it here.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Tuner <pjt@google.com>
Link: http://lkml.kernel.org/r/1322498719-2255-4-git-send-email-glommer@parallels.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 20:51:21 +01:00
Mike Galbraith
b39e66eaf9 sched: Save some hrtick_start_fair cycles
hrtick_start_fair() shows up in profiles even when disabled.

v3.0.6

taskset -c 3 pipe-test

   PerfTop:     997 irqs/sec  kernel:89.5%  exact:  0.0% [1000Hz cycles],  (all, CPU: 3)
------------------------------------------------------------------------------------------------

             Virgin                                    Patched
             samples  pcnt function                    samples  pcnt function
             _______ _____ ___________________________ _______ _____ ___________________________

             2880.00 10.2% __schedule                  3136.00 11.3% __schedule
             1634.00  5.8% pipe_read                   1615.00  5.8% pipe_read
             1458.00  5.2% system_call                 1534.00  5.5% system_call
             1382.00  4.9% _raw_spin_lock_irqsave      1412.00  5.1% _raw_spin_lock_irqsave
             1202.00  4.3% pipe_write                  1255.00  4.5% copy_user_generic_string
             1164.00  4.1% copy_user_generic_string    1241.00  4.5% __switch_to
             1097.00  3.9% __switch_to                  929.00  3.3% mutex_lock
              872.00  3.1% mutex_lock                   846.00  3.0% mutex_unlock
              687.00  2.4% mutex_unlock                 804.00  2.9% pipe_write
              682.00  2.4% native_sched_clock           713.00  2.6% native_sched_clock
              643.00  2.3% system_call_after_swapgs     653.00  2.3% _raw_spin_unlock_irqrestore
              617.00  2.2% sched_clock_local            633.00  2.3% fsnotify
              612.00  2.2% fsnotify                     605.00  2.2% sched_clock_local
              596.00  2.1% _raw_spin_unlock_irqrestore  593.00  2.1% system_call_after_swapgs
              542.00  1.9% sysret_check                 559.00  2.0% sysret_check
              467.00  1.7% fget_light                   472.00  1.7% fget_light
              462.00  1.6% finish_task_switch           461.00  1.7% finish_task_switch
              437.00  1.5% vfs_write                    442.00  1.6% vfs_write
              431.00  1.5% do_sync_write                428.00  1.5% do_sync_write
              413.00  1.5% select_task_rq_fair          404.00  1.5% _raw_spin_lock_irq
              386.00  1.4% update_curr                  402.00  1.4% update_curr
              385.00  1.4% rw_verify_area               389.00  1.4% do_sync_read
              377.00  1.3% _raw_spin_lock_irq           378.00  1.4% vfs_read
              369.00  1.3% do_sync_read                 340.00  1.2% pipe_iov_copy_from_user
              360.00  1.3% vfs_read                     316.00  1.1% __wake_up_sync_key
*             342.00  1.2% hrtick_start_fair            313.00  1.1% __wake_up_common

Signed-off-by: Mike Galbraith <efault@gmx.de>
[ fixed !CONFIG_SCHED_HRTICK borkage ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1321971607.6855.17.camel@marge.simson.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 20:51:20 +01:00
Peter Zijlstra
ac99b862fb jump_label: Provide jump_label_key initializers
Provide two initializers for jump_label_key that initialize it enabled
or disabled. Also modify all jump_label code to allow for jump_labels to be
initialized enabled.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jason Baron <jbaron@redhat.com>
Link: http://lkml.kernel.org/n/tip-p40e3yj21b68y03z1yv825e7@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 20:41:03 +01:00
Peter Zijlstra
9cdbe1cbac jump_label, x86: Fix section mismatch
WARNING: arch/x86/kernel/built-in.o(.text+0x4c71): Section mismatch in
reference from the function arch_jump_label_transform_static() to the
function .init.text:text_poke_early()
The function arch_jump_label_transform_static() references
the function __init text_poke_early().
This is often because arch_jump_label_transform_static lacks a __init
annotation or the annotation of text_poke_early is wrong.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jason Baron <jbaron@redhat.com>
Link: http://lkml.kernel.org/n/tip-9lefe89mrvurrwpqw5h8xm8z@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 20:41:02 +01:00
Ingo Molnar
cc991b83b3 Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core 2011-12-06 19:09:15 +01:00
Yong Zhang
a33caeb118 lockdep, kmemcheck: Annotate ->lock in lockdep_init_map()
Since commit f59de89 ("lockdep: Clear whole lockdep_map on initialization"),
lockdep_init_map() will clear all the struct. But it will break
lock_set_class()/lock_set_subclass(). A typical race condition
is like below:

     CPU A                                   CPU B
lock_set_subclass(lockA);
 lock_set_class(lockA);
   lockdep_init_map(lockA);
     /* lockA->name is cleared */
     memset(lockA);
                                     __lock_acquire(lockA);
                                       /* lockA->class_cache[] is cleared */
                                       register_lock_class(lockA);
                                         look_up_lock_class(lockA);
                                           WARN_ON_ONCE(class->name !=
                                                     lock->name);

     lock->name = name;

So restore to what we have done before commit f59de89 but annotate
->lock with kmemcheck_mark_initialized() to suppress the kmemcheck
warning reported in commit f59de89.

Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Suggested-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111109080451.GB8124@zhy
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 18:18:13 +01:00
Thomas Gleixner
c9c024b3f3 alarmtimers: Fix time comparison
The expiry function compares the timer against current time and does
not expire the timer when the expiry time is >= now. That's wrong. If
the timer is set for now, then it must expire.

Make the condition expiry > now for breaking out the loop.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: stable@kernel.org
2011-12-06 11:38:32 +01:00
Glauber Costa
44252e421a sched/accounting, cgroups: Reuse cgroup's parent pointer
We already have a pointer to the cgroup parent (whose data is more likely
to be in the cache than this, anyway), so there is no need to have this one
in cpuacct.

This patch makes the underlying cgroup be used instead.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Tuner <pjt@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322498719-2255-3-git-send-email-glommer@parallels.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 09:06:40 +01:00
Glauber Costa
3292beb340 sched/accounting: Change cpustat fields to an array
This patch changes fields in cpustat from a structure, to an
u64 array. Math gets easier, and the code is more flexible.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Tuner <pjt@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322498719-2255-2-git-send-email-glommer@parallels.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 09:06:38 +01:00
Suresh Siddha
786d6dc7ae sched, nohz: Clean up the find_new_ilb() using sched groups nr_busy_cpus
nr_busy_cpus in the sched_group_power indicates whether the group
is semi idle or not. This helps remove the is_semi_idle_group() and simplify
the find_new_ilb() in the context of finding an optimal cpu that can do
idle load balancing.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20111202010832.656983582@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 09:06:36 +01:00
Suresh Siddha
0b005cf54e sched, nohz: Implement sched group, domain aware nohz idle load balancing
When there are many logical cpu's that enter and exit idle often, members of
the global nohz data structure are getting modified very frequently causing
lot of cache-line contention.

Make the nohz idle load balancing more scalabale by using the sched domain
topology and 'nr_busy_cpu's in the struct sched_group_power.

Idle load balance is kicked on one of the idle cpu's when there is atleast
one idle cpu and:

 - a busy rq having more than one task or

 - a busy rq's scheduler group that share package resources (like HT/MC
   siblings) and has more than one member in that group busy or

 - for the SD_ASYM_PACKING domain, if the lower numbered cpu's in that
   domain are idle compared to the busy ones.

This will help in kicking the idle load balancing request only when
there is a potential imbalance. And once it is mostly balanced, these kicks will
be minimized.

These changes helped improve the workload that is context switch intensive
between number of task pairs by 2x on a 8 socket NHM-EX based system.

Reported-by: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20111202010832.602203411@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 09:06:34 +01:00
Suresh Siddha
69e1e811dc sched, nohz: Track nr_busy_cpus in the sched_group_power
Introduce nr_busy_cpus in the struct sched_group_power [Not in sched_group
because sched groups are duplicated for the SD_OVERLAP scheduler domain]
and for each cpu that enters and exits idle, this parameter will
be updated in each scheduler group of the scheduler domain that this cpu
belongs to.

To avoid the frequent update of this state as the cpu enters
and exits idle, the update of the stat during idle exit is
delayed to the first timer tick that happens after the cpu becomes busy.
This is done using NOHZ_IDLE flag in the struct rq's nohz_flags.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20111202010832.555984323@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 09:06:32 +01:00
Suresh Siddha
1c792db7f7 sched, nohz: Introduce nohz_flags in 'struct rq'
Introduce nohz_flags in the struct rq, which will track these two flags
for now.

NOHZ_TICK_STOPPED keeps track of the tick stopped status that gets set when
the tick is stopped. It will be used to update the nohz idle load balancer data
structures during the first busy tick after the tick is restarted. At this
first busy tick after tickless idle, NOHZ_TICK_STOPPED flag will be reset.
This will minimize the nohz idle load balancer status updates that currently
happen for every tickless exit, making it more scalable when there
are many logical cpu's that enter and exit idle often.

NOHZ_BALANCE_KICK will track the need for nohz idle load balance
on this rq. This will replace the nohz_balance_kick in the rq, which was
not being updated atomically.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20111202010832.499438999@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 09:06:30 +01:00
Shan Hai
5b680fd613 sched/rt: Code cleanup, remove a redundant function call
The second call to sched_rt_period() is redundant, because the value of the
rt_runtime was already read and it was protected by the ->rt_runtime_lock.

Signed-off-by: Shan Hai <haishan.bai@gmail.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322535836-13590-2-git-send-email-haishan.bai@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 09:06:28 +01:00
Suresh Siddha
4d78a2239e sched: Fix the sched group node allocation for SD_OVERLAP domains
For the SD_OVERLAP domain, sched_groups for each CPU's sched_domain are
privately allocated and not shared with any other cpu. So the
sched group allocation should come from the cpu's node for which
SD_OVERLAP sched domain is being setup.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111118230554.164910950@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 09:06:26 +01:00
Mike Galbraith
916671c08b sched: Set skip_clock_update in yield_task_fair()
This is another case where we are on our way to schedule(),
so can save a useless clock update and resulting microscopic
vruntime update.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1321971686.6855.18.camel@marge.simson.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 09:06:24 +01:00
Mike Galbraith
76854c7e8f sched: Use rt.nr_cpus_allowed to recover select_task_rq() cycles
rt.nr_cpus_allowed is always available, use it to bail from select_task_rq()
when only one cpu can be used, and saves some cycles for pinned tasks.

See the line marked with '*' below:

  # taskset -c 3 pipe-test

   PerfTop:     997 irqs/sec  kernel:89.5%  exact:  0.0% [1000Hz cycles],  (all, CPU: 3)
------------------------------------------------------------------------------------------------

             Virgin                                    Patched
             samples  pcnt function                    samples  pcnt function
             _______ _____ ___________________________ _______ _____ ___________________________

             2880.00 10.2% __schedule                  3136.00 11.3% __schedule
             1634.00  5.8% pipe_read                   1615.00  5.8% pipe_read
             1458.00  5.2% system_call                 1534.00  5.5% system_call
             1382.00  4.9% _raw_spin_lock_irqsave      1412.00  5.1% _raw_spin_lock_irqsave
             1202.00  4.3% pipe_write                  1255.00  4.5% copy_user_generic_string
             1164.00  4.1% copy_user_generic_string    1241.00  4.5% __switch_to
             1097.00  3.9% __switch_to                  929.00  3.3% mutex_lock
              872.00  3.1% mutex_lock                   846.00  3.0% mutex_unlock
              687.00  2.4% mutex_unlock                 804.00  2.9% pipe_write
              682.00  2.4% native_sched_clock           713.00  2.6% native_sched_clock
              643.00  2.3% system_call_after_swapgs     653.00  2.3% _raw_spin_unlock_irqrestore
              617.00  2.2% sched_clock_local            633.00  2.3% fsnotify
              612.00  2.2% fsnotify                     605.00  2.2% sched_clock_local
              596.00  2.1% _raw_spin_unlock_irqrestore  593.00  2.1% system_call_after_swapgs
              542.00  1.9% sysret_check                 559.00  2.0% sysret_check
              467.00  1.7% fget_light                   472.00  1.7% fget_light
              462.00  1.6% finish_task_switch           461.00  1.7% finish_task_switch
              437.00  1.5% vfs_write                    442.00  1.6% vfs_write
              431.00  1.5% do_sync_write                428.00  1.5% do_sync_write
*             413.00  1.5% select_task_rq_fair          404.00  1.5% _raw_spin_lock_irq
              386.00  1.4% update_curr                  402.00  1.4% update_curr
              385.00  1.4% rw_verify_area               389.00  1.4% do_sync_read
              377.00  1.3% _raw_spin_lock_irq           378.00  1.4% vfs_read
              369.00  1.3% do_sync_read                 340.00  1.2% pipe_iov_copy_from_user
              360.00  1.3% vfs_read                     316.00  1.1% __wake_up_sync_key
              342.00  1.2% hrtick_start_fair            313.00  1.1% __wake_up_common

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1321971504.6855.15.camel@marge.simson.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 08:51:26 +01:00
Suresh Siddha
77e81365e0 sched: Clean up domain traversal in select_idle_sibling()
Instead of going through the scheduler domain hierarchy multiple times
(for giving priority to an idle core over an idle SMT sibling in a busy
core), start with the highest scheduler domain with the SD_SHARE_PKG_RESOURCES
flag and traverse the domain hierarchy down till we find an idle group.

This cleanup also addresses an issue reported by Mike where the recent
changes returned the busy thread even in the presence of an idle SMT
sibling in single socket platforms.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1321556904.15339.25.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 08:51:25 +01:00
Andrew Vagin
b781a602ac events, sched: Add tracepoint for accounting blocked time
This tracepoint shows how long a task is sleeping in uninterruptible state.

E.g. it may show how long and where a mutex is waited for.

Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322471015-107825-8-git-send-email-avagin@openvz.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 08:51:23 +01:00
Gleb Natapov
b202952075 perf, core: Rate limit perf_sched_events jump_label patching
jump_lable patching is very expensive operation that involves pausing all
cpus. The patching of perf_sched_events jump_label is easily controllable
from userspace by unprivileged user.

When te user runs a loop like this:

  "while true; do perf stat -e cycles true; done"

... the performance of my test application that just increments a counter
for one second drops by 4%.

This is on a 16 cpu box with my test application using only one of
them. An impact on a real server doing real work will be worse.

Performance of KVM PMU drops nearly 50% due to jump_lable for "perf
record" since KVM PMU implementation creates and destroys perf event
frequently.

This patch introduces a way to rate limit jump_label patching and uses
it to fix the above problem.

I believe that as jump_label use will spread the problem will become more
common and thus solving it in a generic code is appropriate. Also fixing
it in the perf code would result in moving jump_label accounting logic to
perf code with all the ifdefs in case of JUMP_LABEL=n kernel. With this
patch all details are nicely hidden inside jump_label code.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111127155909.GO2557@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 08:34:02 +01:00
Peter Zijlstra
b79387ef18 perf: Fix enable_on_exec for sibling events
Deng-Cheng Zhu reported that sibling events that were created disabled
with enable_on_exec would never get enabled. Iterate all events
instead of the group lists.

Reported-by: Deng-Cheng Zhu <dczhu@mips.com>
Tested-by: Deng-Cheng Zhu <dczhu@mips.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1322048382.14799.41.camel@twins
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 08:34:01 +01:00
Peter Zijlstra
1d9b482e78 perf: Remove superfluous arguments
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-yv4o74vh90suyghccgykbnry@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 08:33:59 +01:00
Peter Zijlstra
0f5a260128 perf: Avoid a useless pmu_disable() in the perf-tick
Gleb writes:

 > Currently pmu is disabled and re-enabled on each timer interrupt even
 > when no rotation or frequency adjustment is needed. On Intel CPU this
 > results in two writes into PERF_GLOBAL_CTRL MSR per tick. On bare metal
 > it does not cause significant slowdown, but when running perf in a virtual
 > machine it leads to 20% slowdown on my machine.

Cure this by keeping a perf_event_context::nr_freq counter that counts the
number of active events that require frequency adjustments and use this in a
similar fashion to the already existing nr_events != nr_active test in
perf_rotate_context().

By being able to exclude both rotation and frequency adjustments a-priory for
the common case we can avoid the otherwise superfluous PMU disable.

Suggested-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-515yhoatehd3gza7we9fapaa@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 08:33:52 +01:00
Ming Lei
81140acc66 lockdep: Print lock name in lockdep_init_error()
This patch prints the name of the lock which is acquired
before lockdep_init() is called, so that users can easily
find which lock triggered the lockdep init error warning.

This patch also removes the lockdep_init_error() message
of "Arch code didn't call lockdep_init() early enough?"
since lockdep_init() is called in arch independent code now.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1321508072-23853-2-git-send-email-tom.leiming@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 08:16:55 +01:00
Yong Zhang
d3d03d4fc5 lockdep, kmemcheck: Annotate ->lock in lockdep_init_map()
Since commit f59de89 ("lockdep: Clear whole lockdep_map on initialization"),
lockdep_init_map() will clear all the struct. But it will break
lock_set_class()/lock_set_subclass(). A typical race condition
is like below:

     CPU A                                   CPU B
lock_set_subclass(lockA);
 lock_set_class(lockA);
   lockdep_init_map(lockA);
     /* lockA->name is cleared */
     memset(lockA);
                                     __lock_acquire(lockA);
                                       /* lockA->class_cache[] is cleared */
                                       register_lock_class(lockA);
                                         look_up_lock_class(lockA);
                                           WARN_ON_ONCE(class->name !=
                                                     lock->name);

     lock->name = name;

So restore to what we have done before commit f59de89 but annotate
->lock with kmemcheck_mark_initialized() to suppress the kmemcheck
warning reported in commit f59de89.

Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Suggested-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111109080451.GB8124@zhy
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 08:16:51 +01:00
Ben Hutchings
fbdc4b9a6c lockdep, rtmutex, bug: Show taint flags on error
Show the taint flags in all lockdep and rtmutex-debug error messages.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1319773015.6759.30.camel@deadeye
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 08:16:49 +01:00
Peter Zijlstra
df754e6af2 lockdep, bug: Exclude TAINT_FIRMWARE_WORKAROUND from disabling lockdep
It's unlikely that TAINT_FIRMWARE_WORKAROUND causes false
lockdep messages, so do not disable lockdep in that case.
We still want to keep lockdep disabled in the
TAINT_OOT_MODULE case:

  - bin-only modules can cause various instabilities in
    their and in unrelated kernel code

  - they are impossible to debug for kernel developers

  - they also typically do not have the copyright license
    permission to link to the GPL-ed lockdep code.

Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-xopopjjens57r0i13qnyh2yo@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 08:16:47 +01:00
Ingo Molnar
7119a341f3 Merge commit 'v3.2-rc4' into core/locking
Merge reason: Pick up post-rc1 fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 08:11:33 +01:00
Ingo Molnar
d6c1c49de5 Merge branch 'perf/urgent' into perf/core
Merge reason: Add these cherry-picked commits so that future changes
              on perf/core don't conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 06:43:49 +01:00
Linus Torvalds
232ea34455 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix loss of notification with multi-event
  perf, x86: Force IBS LVT offset assignment for family 10h
  perf, x86: Disable PEBS on SandyBridge chips
  trace_events_filter: Use rcu_assign_pointer() when setting ftrace_event_call->filter
  perf session: Fix crash with invalid CPU list
  perf python: Fix undefined symbol problem
  perf/x86: Enable raw event access to Intel offcore events
  perf: Don't use -ENOSPC for out of PMU resources
  perf: Do not set task_ctx pointer in cpuctx if there are no events in the context
  perf/x86: Fix PEBS instruction unwind
  oprofile, x86: Fix crash when unloading module (nmi timer mode)
  oprofile: Fix crash when unloading module (hr timer mode)
2011-12-05 16:54:00 -08:00
Linus Torvalds
40c043b077 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clockevents: Set noop handler in clockevents_exchange_device()
  tick-broadcast: Stop active broadcast device when replacing it
  clocksource: Fix bug with max_deferment margin calculation
  rtc: Fix some bugs that allowed accumulating time drift in suspend/resume
  rtc: Disable the alarm in the hardware
2011-12-05 16:53:43 -08:00
Linus Torvalds
f14aa871c7 Merge branches 'core-urgent-for-linus' and 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  slab, lockdep: Fix silly bug

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Fix race condition when stopping the irq thread
2011-12-05 16:51:21 -08:00
Linus Torvalds
7125faceab Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched, x86: Avoid unnecessary overflow in sched_clock
  sched: Fix buglet in return_cfs_rq_runtime()
  sched: Avoid SMT siblings in select_idle_sibling() if possible
  sched: Set the command name of the idle tasks in SMP kernels
  sched, rt: Provide means of disabling cross-cpu bandwidth sharing
  sched: Document wait_for_completion_*() return values
  sched_fair: Fix a typo in the comment describing update_sd_lb_stats
  sched: Add a comment to effective_load() since it's a pain
2011-12-05 16:50:24 -08:00
Thomas Gleixner
0518469d0a Merge branch 'fortglx/3.3/tip/timers/core' of git://git.linaro.org/people/jstultz/linux into timers/core 2011-12-05 22:13:49 +01:00
Steven Rostedt
ddf6e0e507 ftrace: Fix hash record accounting bug
If the set_ftrace_filter is cleared by writing just whitespace to
it, then the filter hash refcounts will be decremented but not
updated. This causes two bugs:

1) No functions will be enabled for tracing when they all should be

2) If the users clears the set_ftrace_filter twice, it will crash ftrace:

------------[ cut here ]------------
WARNING: at /home/rostedt/work/git/linux-trace.git/kernel/trace/ftrace.c:1384 __ftrace_hash_rec_update.part.27+0x157/0x1a7()
Modules linked in:
Pid: 2330, comm: bash Not tainted 3.1.0-test+ #32
Call Trace:
 [<ffffffff81051828>] warn_slowpath_common+0x83/0x9b
 [<ffffffff8105185a>] warn_slowpath_null+0x1a/0x1c
 [<ffffffff810ba362>] __ftrace_hash_rec_update.part.27+0x157/0x1a7
 [<ffffffff810ba6e8>] ? ftrace_regex_release+0xa7/0x10f
 [<ffffffff8111bdfe>] ? kfree+0xe5/0x115
 [<ffffffff810ba51e>] ftrace_hash_move+0x2e/0x151
 [<ffffffff810ba6fb>] ftrace_regex_release+0xba/0x10f
 [<ffffffff8112e49a>] fput+0xfd/0x1c2
 [<ffffffff8112b54c>] filp_close+0x6d/0x78
 [<ffffffff8113a92d>] sys_dup3+0x197/0x1c1
 [<ffffffff8113a9a6>] sys_dup2+0x4f/0x54
 [<ffffffff8150cac2>] system_call_fastpath+0x16/0x1b
---[ end trace 77a3a7ee73794a02 ]---

Link: http://lkml.kernel.org/r/20111101141420.GA4918@debian

Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-05 13:28:47 -05:00
Gleb Natapov
bbbf7af4bf jump_label: jump_label_inc may return before the code is patched
If cpu A calls jump_label_inc() just after atomic_add_return() is
called by cpu B, atomic_inc_not_zero() will return value greater then
zero and jump_label_inc() will return to a caller before jump_label_update()
finishes its job on cpu B.

Link: http://lkml.kernel.org/r/20111018175551.GH17571@redhat.com

Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-05 13:28:46 -05:00
Steven Rostedt
c7c6ec8bec ftrace: Remove force undef config value left for testing
A forced undef of a config value was used for testing and was
accidently left in during the final commit. This causes x86 to
run slower than needed while running function tracing as well
as causes the function graph selftest to fail when DYNMAIC_FTRACE
is not set. This is because the code in MCOUNT expects the ftrace
code to be processed with the config value set that happened to
be forced not set.

The forced config option was left in by:
    commit 6331c28c96
    ftrace: Fix dynamic selftest failure on some archs

Link: http://lkml.kernel.org/r/20111102150255.GA6973@debian

Cc: stable@vger.kernel.org
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-05 13:28:45 -05:00
Li Zefan
27b14b56af tracing: Restore system filter behavior
Though not all events have field 'prev_pid', it was allowed to do this:

  # echo 'prev_pid == 100' > events/sched/filter

but commit 75b8e98263 (tracing/filter: Swap
entire filter of events) broke it without any reason.

Link: http://lkml.kernel.org/r/4EAF46CF.8040408@cn.fujitsu.com

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-05 13:28:45 -05:00
Ilya Dryomov
cb59974742 tracing: fix event_subsystem ref counting
Fix a bug introduced by e9dbfae5, which prevents event_subsystem from
ever being released.

Ref_count was added to keep track of subsystem users, not for counting
events.  Subsystem is created with ref_count = 1, so there is no need to
increment it for every event, we have nr_events for that.  Fix this by
touching ref_count only when we actually have a new user -
subsystem_open().

Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Link: http://lkml.kernel.org/r/1320052062-7846-1-git-send-email-idryomov@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-05 13:28:44 -05:00
Ingo Molnar
dc440d10e1 Merge branch 'tip/perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/urgent 2011-12-05 14:34:00 +01:00
Mitsuo Hayasaka
55af77969f x86: Panic on detection of stack overflow
Currently, messages are just output on the detection of stack
overflow, which is not sufficient for systems that need a
high reliability. This is because in general the overflow may
corrupt data, and the additional corruption may occur due to
reading them unless systems stop.

This patch adds the sysctl parameter
kernel.panic_on_stackoverflow and causes a panic when detecting
the overflows of kernel, IRQ and exception stacks except user
stack according to the parameter. It is disabled by default.

Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: http://lkml.kernel.org/r/20111129060836.11076.12323.stgit@ltc219.sdl.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05 11:37:47 +01:00
Peter Zijlstra
10c6db110d perf: Fix loss of notification with multi-event
When you do:
        $ perf record -e cycles,cycles,cycles noploop 10

You expect about 10,000 samples for each event, i.e., 10s at
1000samples/sec. However, this is not what's happening. You
get much fewer samples, maybe 3700 samples/event:

$ perf report -D | tail -15
Aggregated stats:
           TOTAL events:      10998
            MMAP events:         66
            COMM events:          2
          SAMPLE events:      10930
cycles stats:
           TOTAL events:       3644
          SAMPLE events:       3644
cycles stats:
           TOTAL events:       3642
          SAMPLE events:       3642
cycles stats:
           TOTAL events:       3644
          SAMPLE events:       3644

On a Intel Nehalem or even AMD64, there are 4 counters capable
of measuring cycles, so there is plenty of space to measure those
events without multiplexing (even with the NMI watchdog active).
And even with multiplexing, we'd expect roughly the same number
of samples per event.

The root of the problem was that when the event that caused the buffer
to become full was not the first event passed on the cmdline, the user
notification would get lost. The notification was sent to the file
descriptor of the overflowed event but the perf tool was not polling
on it.  The perf tool aggregates all samples into a single buffer,
i.e., the buffer of the first event. Consequently, it assumes
notifications for any event will come via that descriptor.

The seemingly straight forward solution of moving the waitq into the
ringbuffer object doesn't work because of life-time issues. One could
perf_event_set_output() on a fd that you're also blocking on and cause
the old rb object to be freed while its waitq would still be
referenced by the blocked thread -> FAIL.

Therefore link all events to the ringbuffer and broadcast the wakeup
from the ringbuffer object to all possible events that could be waited
upon. This is rather ugly, and we're open to better solutions but it
works for now.

Reported-by: Stephane Eranian <eranian@google.com>
Finished-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111126014731.GA7030@quad
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05 09:33:03 +01:00
Thomas Gleixner
de28f25e82 clockevents: Set noop handler in clockevents_exchange_device()
If a device is shutdown, then there might be a pending interrupt,
which will be processed after we reenable interrupts, which causes the
original handler to be run. If the old handler is the (broadcast)
periodic handler the shutdown state might hang the kernel completely.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
2011-12-02 16:07:23 +01:00
Thomas Gleixner
c1be84309c tick-broadcast: Stop active broadcast device when replacing it
When a better rated broadcast device is installed, then the current
active device is not disabled, which results in two running broadcast
devices.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
2011-12-02 16:06:54 +01:00
Ido Yariv
550acb1926 genirq: Fix race condition when stopping the irq thread
In irq_wait_for_interrupt(), the should_stop member is verified before
setting the task's state to TASK_INTERRUPTIBLE and calling schedule().
In case kthread_stop sets should_stop and wakes up the process after
should_stop is checked by the irq thread but before the task's state
is changed, the irq thread might never exit:

kthread_stop                    irq_wait_for_interrupt
------------                    ----------------------

                                 ...
...                              while (!kthread_should_stop()) {
kthread->should_stop = 1;
wake_up_process(k);
wait_for_completion(&kthread->exited);
...
                                     set_current_state(TASK_INTERRUPTIBLE);

                                     ...

                                     schedule();
                                 }

Fix this by checking if the thread should stop after modifying the
task's state.

[ tglx: Simplified it a bit ]

Signed-off-by: Ido Yariv <ido@wizery.com>
Link: http://lkml.kernel.org/r/1322740508-22640-1-git-send-email-ido@wizery.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
2011-12-02 11:54:24 +01:00
Tejun Heo
d3d9acf646 trace_events_filter: Use rcu_assign_pointer() when setting ftrace_event_call->filter
ftrace_event_call->filter is sched RCU protected but didn't use
rcu_assign_pointer().  Use it.

TODO: Add proper __rcu annotation to call->filter and all its users.

-v2: Use RCU_INIT_POINTER() for %NULL clearing as suggested by Eric.

Link: http://lkml.kernel.org/r/20111123164949.GA29639@google.com

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@kernel.org # (2.6.39+)
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-01 22:16:47 -05:00
Yang Honggang (Joseph)
b1f919664d clocksource: Fix bug with max_deferment margin calculation
In order to leave a margin of 12.5% we should >> 3 not >> 5.

CC: stable@kernel.org
Signed-off-by: Yang Honggang (Joseph) <eagle.rtlinux@gmail.com>
[jstultz: Modified commit subject]
Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-12-01 15:50:00 -08:00
Linus Torvalds
8cd7920370 Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: Update comments describing device power management callbacks
  PM / Sleep: Update documentation related to system wakeup
  PM / Runtime: Make documentation follow the new behavior of irq_safe
  PM / Sleep: Correct inaccurate information in devices.txt
  PM / Domains: Document how PM domains are used by the PM core
  PM / Hibernate: Do not leak memory in error/test code paths
2011-11-29 14:43:22 -08:00
Paul Bolle
a13b032776 clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
There's no Kconfig symbol GENERIC_CLOCKEVENTS_MIGR, so the check for it
will always fail.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-29 11:56:49 +01:00
Linus Torvalds
a34815b96f Merge branch 'for-3.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
* 'for-3.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup_freezer: fix freezing groups with stopped tasks
2011-11-28 13:55:59 -08:00
Tejun Heo
d4bbf7e775 Merge branch 'master' into x86/memblock
Conflicts & resolutions:

* arch/x86/xen/setup.c

	dc91c728fd "xen: allow extra memory to be in multiple regions"
	24aa07882b "memblock, x86: Replace memblock_x86_reserve/free..."

	conflicted on xen_add_extra_mem() updates.  The resolution is
	trivial as the latter just want to replace
	memblock_x86_reserve_range() with memblock_reserve().

* drivers/pci/intel-iommu.c

	166e9278a3 "x86/ia64: intel-iommu: move to drivers/iommu/"
	5dfe8660a3 "bootmem: Replace work_with_active_regions() with..."

	conflicted as the former moved the file under drivers/iommu/.
	Resolved by applying the chnages from the latter on the moved
	file.

* mm/Kconfig

	6661672053 "memblock: add NO_BOOTMEM config symbol"
	c378ddd53f "memblock, x86: Make ARCH_DISCARD_MEMBLOCK a config option"

	conflicted trivially.  Both added config options.  Just
	letting both add their own options resolves the conflict.

* mm/memblock.c

	d1f0ece6cd "mm/memblock.c: small function definition fixes"
	ed7b56a799 "memblock: Remove memblock_memory_can_coalesce()"

	confliected.  The former updates function removed by the
	latter.  Resolution is trivial.

Signed-off-by: Tejun Heo <tj@kernel.org>
2011-11-28 09:46:22 -08:00