Commit Graph

85 Commits

Author SHA1 Message Date
Gustavo A. R. Silva
63f1e05f7f PM / devfreq: Fix potential NULL pointer dereference in governor_store
df->governor is being dereferenced before it is null checked,
hence there is a potential null pointer dereference.

Notice that df->governor is being null checked at line 1004:
if (df->governor) {, which implies it might be null.

Fix this by null checking df->governor before dereferencing it.

Addresses-Coverity-ID: 1401988 ("Dereference before null check")
Fixes: bcf23c79c4 ("PM / devfreq: Fix available_governor sysfs")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-01-02 09:36:54 +09:00
Bjorn Andersson
d1bf2d3072 PM / devfreq: Propagate error from devfreq_add_device()
Propagate the error of devfreq_add_device() in devm_devfreq_add_device()
rather than statically returning ENOMEM. This makes it slightly faster
to pinpoint the cause of a returned error.

Fixes: 8cd84092d3 ("PM / devfreq: Add resource-managed function for devfreq device")
Cc: stable@vger.kernel.org
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-01-02 09:36:54 +09:00
Chanwoo Choi
ccc4c3bcbb PM / devfreq: Remove unneeded conditional statement
The freq_table array of each devfreq device is always not NULL.
In result, it is unneeded to check whether profile->freq_table
is NULL or not.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26 17:08:40 +09:00
Chanwoo Choi
416b46a262 PM / devfreq: Show the all available frequencies
The commit a76caf55e5 ("thermal: Add devfreq cooling") allows
the devfreq device to use the cooling device. When the cooling down
are required, the devfreq_cooling.c disables the OPP entry with
the dev_pm_opp_disable(). In result, 'available_frequencies'[1]
sysfs node never came to show the all available frequencies.
[1] /sys/class/devfreq/.../available_frequencies

So, this patch uses the 'freq_table' in the 'struct devfreq_dev_profile'
in order to show the all available frequencies.
- If 'freq_table' is NULL, devfreq core initializes them by using OPP values.
- If 'freq_table' is initialized, devfreq core just uses the 'freq_table'.

And this patch adds some comment about the sort way of 'freq_table'.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26 17:08:40 +09:00
Chanwoo Choi
ea572f8160 PM / devfreq: Change return type of devfreq_set_freq_table()
This patch changes the return type of devfreq_set_freq_table()
from 'void' to 'int' in order to check whether it fails or not.

And This patch just removes the 'devfreq' prefix and the description
of function. Because the helper functions are only used by the devfreq.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26 17:08:40 +09:00
Chanwoo Choi
f1d981eaec PM / devfreq: Use the available min/max frequency
The commit a76caf55e5 ("thermal: Add devfreq cooling") is able
to disable OPP as a cooling device. In result, both update_devfreq()
and {min|max}_freq_show() have to consider the 'opp->available'
status of each OPP.

So, this patch adds the 'scaling_{min|max}_freq' to struct devfreq
in order to indicate the available mininum and maximum frequency
by adjusting OPP interface such as dev_pm_opp_{disable|enable}().
The 'scaling_{min|max}_freq' are used for on both update_devfreq()
and {min|max}_freq_show().

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26 17:08:40 +09:00
Chanwoo Choi
1051e2c304 Revert "PM / devfreq: Add show_one macro to delete the duplicate code"
This reverts commit 3104fa3081.

The {min|max}_freq_show() show the stored value of the struct devfreq.
But, if the drivers/thermal/devfreq_cooling.c disables the specific
frequency value, {min|max}_freq_show() have to check this situation
before showing the stored value. So, this patch revert the macro
in order to add the additional codes.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26 17:08:40 +09:00
Chanwoo Choi
ab8f58ad72 PM / devfreq: Set min/max_freq when adding the devfreq device
Prior to that, the min/max_freq of the devfreq device are always zero
before the user changes the min/max_freq through sysfs entries.
It might make the confusion for the min/max_freq.

This patch initializes the available min/max_freq by using the OPP
during adding the devfreq device.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26 17:08:40 +09:00
Chanwoo Choi
9e14de1077 PM / devfreq: Fix memory leak when fail to register device
When the devfreq_add_device fails to register deivce, the memory
leak of devfreq instance happen. So, this patch fix the memory
leak issue. Before freeing the devfreq instance checks whether
devfreq instance is NULL or not because the device_unregister()
frees the devfreq instance when jumping to the 'err_init'.
It is to prevent the duplicate the kfee(devfreq).

Cc: stable@vger.kernel.org
Fixes: ac4b281176 ("PM / devfreq: fix duplicated kfree on devfreq pointer")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-08-28 10:31:08 +09:00
Masahiro Yamada
4091fb95b5 scripts/spelling.txt: add "followings" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  followings||following

While we are here, add a missing colon in the boilerplate in DT binding
documents.  The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as
well.

I reworded "as the followings:" to "as follows:" for
drivers/usb/gadget/udc/renesas_usb3.c.

Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Rafael J. Wysocki
41ef3d1df0 Merge branch 'pm-devfreq'
* pm-devfreq:
  PM / devfreq: Modify the device name as devfreq(X) for sysfs
  PM / devfreq: Simplify the sysfs name of devfreq-event device
  PM / devfreq: Remove unnecessary separate _remove_devfreq()
  PM / devfreq: Fix wrong trans_stat of passive devfreq device
  PM / devfreq: Fix available_governor sysfs
  PM / devfreq: exynos-ppmu: Show the registred device for ppmu device
  PM / devfreq: Fix the wrong description for userspace governor
  PM / devfreq: Fix the checkpatch warnings
  PM / devfreq: exynos-bus: Print the real clock rate of bus
  PM / devfreq: exynos-ppmu: Use the regmap interface to handle the registers
  PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433
  PM / devfreq: Don't delete sysfs group twice
2017-02-20 14:23:40 +01:00
Chanwoo Choi
4585fbcb53 PM / devfreq: Modify the device name as devfreq(X) for sysfs
This patch modifies the device name as devfreq(X) for sysfs by using the 'devfreq'
prefix word instead of separate device name. On user-space aspect, user would
find the some devfreq drvier with 'devfreq(X)' pattern. So, this patch modify the
device name as following:
- /sys/class/devfreq/[non-standard device name] -> /sys/class/devfreq/devfreq(X)

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31 16:57:19 +09:00
Chanwoo Choi
29b6968b05 PM / devfreq: Remove unnecessary separate _remove_devfreq()
The _remove_devfreq() releases the all resources of the devfreq
device. This function is only called in the devfreq_dev_release().
For that reason, the devfreq core doesn't need to leave the
_remove_devfreq() separately. This patch releases the all
resources in the devfreq_dev_release() and then removes the
_remove_devfreq().

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31 15:48:00 +09:00
Chanwoo Choi
30582c25a4 PM / devfreq: Fix wrong trans_stat of passive devfreq device
Until now, the trans_stat information of passive devfreq is not updated.
This patch updates the trans_stat information after setting the target
frequency of passive devfreq device.

Fixes: 996133119f ("PM / devfreq: Add new passive governor")
Cc: stable@vger.kernel.org
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31 15:47:32 +09:00
Chanwoo Choi
bcf23c79c4 PM / devfreq: Fix available_governor sysfs
The devfreq using passive governor is not able to change the governor.
So, the user can not change the governor through 'available_governor' sysfs
entry. Also, the devfreq which don't use the passive governor is not able to
change to 'passive' governor on the fly.

Fixes: 996133119f ("PM / devfreq: Add new passive governor")
Cc: stable@vger.kernel.org
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31 15:46:49 +09:00
Chanwoo Choi
9d0109be48 PM / devfreq: Fix the checkpatch warnings
This patch just fixes the checkpatch warnings.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31 14:12:19 +09:00
Viresh Kumar
8a31d9d942 PM / OPP: Update OPP users to put reference
This patch updates dev_pm_opp_find_freq_*() routines to get a reference
to the OPPs returned by them.

Also updates the users of dev_pm_opp_find_freq_*() routines to call
dev_pm_opp_put() after they are done using the OPPs.

As it is guaranteed the that OPPs wouldn't get freed while being used,
the RCU read side locking present with the users isn't required anymore.
Drop it as well.

This patch also updates all users of devfreq_recommended_opp() which was
returning an OPP received from the OPP core.

Note that some of the OPP core routines have gained
rcu_read_{lock|unlock}() calls, as those still use RCU specific APIs
within them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> [Devfreq]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-30 09:22:21 +01:00
Viresh Kumar
dc2c9ad52a PM / OPP: Don't expose srcu_head to register notifiers
Let the OPP core provide helpers to register notifiers for any device,
instead of exposing srcu_head outside of the core.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-27 11:49:09 +01:00
Chanwoo Choi
73613b16cb PM / devfreq: Fix the bug of devfreq_add_device when governor is NULL
This patch fixes the bug of devfreq_add_device(). The devfreq device must
have the default governor. If find_devfreq_governor() returns error,
devfreq_add_device() fail to add the devfreq instance.

Fixes: 1b5c1be2c8 (PM / devfreq: map devfreq drivers to governor using name)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-03 00:21:45 +01:00
MyungJoo Ham
bafeb42bd8 PM / devfreq: correct comment typo.
The function name in the comment was incorrect.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-11-17 11:31:28 +09:00
Tobias Jakobi
d0563a039c PM / devfreq: Skip status update on uninitialized previous_freq
In case devfreq->previous_freq is still uninitialized in
devfreq_update_status(), i.e. it has value '0', the lookups in
that function fail, eventually leading to some error message:
[    3.041292] devfreq bus_dmc: Couldn't update frequency transition information.

Just skip the statup update in this situation.

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-11 00:01:20 +02:00
Axel Lin
0f376c9cd8 PM / devfreq: Add proper locking around list_del()
Use devfreq_list_lock around list_del() to prevent list corruption.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-11 00:00:20 +02:00
Peter Chen
3427c6f0b6 PM / devfreq: add missing of_node_put after calling of_parse_phandle
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.

Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-07-06 13:11:24 +09:00
Paul Gortmaker
417dc4bb6b PM / devfreq: make devfreq explicitly non-modular
The Kconfig currently controlling compilation of this code is:

menuconfig PM_DEVFREQ
      bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

This code wasn't using module_init, so we don't need to be concerned
with altering the initcall level here.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

We don't replace module.h with init.h since the file already has that.
But we do add export.h since this file does export some symbols.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-07-06 13:11:22 +09:00
Chanwoo Choi
0d37189e80 PM / devfreq: Send the DEVFREQ_POSTCHANGE notification when target() is failed
This patch sends the DEVFREQ_POSTCHANGE notification when
devfreq->profile->targer() is failed. The PRECHANGE/POSTCHANGE
should be paired.

Fixes: 0fe3a66410 (PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier)
Reported-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-23 23:15:12 +02:00
Lukasz Luba
8d39fc085d PM / devfreq: fix initialization of current frequency in last status
Some systems need current frequency from last_status for calculation
but it is zeroed during initialization. When the device starts there is
no history, but we can assume that the last frequency was the
same as the initial frequency (which is also used in 'previous_freq').
The log shows the result of this misinterpreted value.
[    2.042847] ... Failed to get voltage for frequency 0: -34

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:53:00 +09:00
MyungJoo Ham
67ffdb529b PM / devfreq: remove double put_device
When device_register() returns with error, it has already
done put_device() on the input device pointer.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:52:52 +09:00
Cai Zhiyong
a5e9b937fa PM / devfreq: fix double call put_device
1295  */
1296 void device_unregister(struct device *dev)
1297 {
1298         pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
1299         device_del(dev);
1300         put_device(dev);
1301 }
1302 EXPORT_SYMBOL_GPL(device_unregister);
1303

device_unregister is called put_device, there is no need to call
put_device(&devfreq->dev) again.

Signed-off-by: Cai Zhiyong <caizhiyong@huawei.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:52:43 +09:00
MyungJoo Ham
ac4b281176 PM / devfreq: fix duplicated kfree on devfreq pointer
device_unregister() calls kfree already.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:52:40 +09:00
MyungJoo Ham
3e1d7fb0d2 PM / devfreq: devm_kzalloc to have dev pointer more precisely
devm_kzalloc of devfreq's statistics data structure has been
using its parent device as the dev allocated for.
If a device's devfreq is disabled in run-time,
such allocated memory won't be freed.

Desginating more precisely with the devfreq device
pointer fixes the issue.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:51:08 +09:00
Chanwoo Choi
0fe3a66410 PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier
This patch adds the new DEVFREQ_TRANSITION_NOTIFIER notifier to send
the notification when the frequency of device is changed.
This notifier has two state as following:
- DEVFREQ_PRECHANGE  : Notify it before chaning the frequency of device
- DEVFREQ_POSTCHANGE : Notify it after changed the frequency of device

And this patch adds the resourced-managed function to release the resource
automatically when error happen.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board]
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03 11:20:07 +09:00
Chanwoo Choi
8f510aeb22 PM / devfreq: Add devfreq_get_devfreq_by_phandle()
This patch adds the new devfreq_get_devfreq_by_phandle() OF helper function
which can find the instance of devfreq device by using phandle ("devfreq").

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
[m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board]
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03 11:20:06 +09:00
MyungJoo Ham
34bd322070 PM / devfreq: Do not show statistics if it's not ready.
Before this patch for a device without statistics support,

$ cat trans_stat
    From  :   To
          :   time(ms)
Total transitions : 0
$

After this patch applied for such a device,

$ cat trans_stat
Not Supported.
$

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13 17:30:33 +09:00
Chanwoo Choi
d7df1e4647 PM / devfreq: Modify the indentation of trans_stat sysfs for readability
This patch modifies the indentation of 'trans_stat' sysfs to improve readability.
The 1GHz is 1000,000,000. So it needs the least 10 position to show the GHz unit.

- Before apply this patch,
-sh-3.2# cat trans_stat
   From  :   To
         :50000000100000000133000000200000000400000000   time(ms)
*50000000:       0       0       0       0       7   1817635
 100000000:       4       0       0       0       4      1590
 133000000:       1       4       0       0       7       975
 200000000:       2       2       7       0       1      2655
 400000000:       0       2       5      12       0      1860
Total transition : 58

- After apply this patch,
-sh-3.2# cat trans_stat
     From  :   To
           :  50000000 100000000 133000000 200000000 400000000   time(ms)
*  50000000:         0         0         0         0         7     14405
  100000000:         4         0         0         0         3      2015
  133000000:         2         3         0         0         7      1020
  200000000:         1         2         7         0         0      2970
  400000000:         0         2         5        10         0      1575
Total transition : 53

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13 17:30:33 +09:00
Chanwoo Choi
0ec09ac2ce PM / devfreq: Set the freq_table of devfreq device
This patch initialize the freq_table array of each devfreq device by using
the devfreq_set_freq_table(). If freq_table is NULL, the devfreq framework
is not able to support the frequency transtion information through sysfs.

The OPP core uses the integer type for the number of opps in the opp list
and uses the 'unsigned long' type for each frequency. So, this patch
modifies the type of some variable as following:
- the type of freq_table : unsigned int -> unsigned long
- the type of max_state  : unsigned int -> int

- Corrected types, format strings, mutex usages by MyungJoo

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13 17:30:32 +09:00
Chanwoo Choi
3104fa3081 PM / devfreq: Add show_one macro to delete the duplicate code
This patch adds the 'show_one' macro to simplify the duplicate code
of both max_freq_show() and min_freq_show().

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13 17:30:32 +09:00
Geliang Tang
6d3cbfa718 PM / devfreq: fix double kfree
When device_register() fails, kfree(devfreq) is called already in
devfreq_dev_release(), hence there is no need to call kfree(devfreq)
in err_dev again.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-10-02 11:05:58 +09:00
Tobias Jakobi
14a21e7ba8 PM / devfreq: Fix governor_store()
Writing the currently set governor into sysfs currently
seems to fail.
Fix this by setting the return code to zero before
leaving governor_store().

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-30 14:16:31 +09:00
Xiaolong Ye
5f25f066f7 PM / devfreq: Fix incorrect type issue.
time_in_state in struct devfreq is defined as unsigned long, so
devm_kzalloc should use sizeof(unsigned long) as argument instead
of sizeof(unsigned int), otherwise it will cause unexpected result
in 64bit system.

Signed-off-by: Xiaolong Ye <yexl@marvell.com>
Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11 14:23:30 +09:00
Javi Merino
d3b7e1745c PM / devfreq: drop comment about thermal setting max_freq
The thermal infrastructure should use the devfreq cooling device, which
uses the OPP library to disable OPPs as necessary.

Fix a couple of typos in the same comment while we are at it.

Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11 14:23:29 +09:00
Viresh Kumar
9348da2f1c PM / devfreq: Drop unlikely before IS_ERR(_OR_NULL)
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there
is no need to do that again from its callers. Drop it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11 14:23:21 +09:00
MyungJoo Ham
4b524f1218 PM / devfreq: correct misleading comment
_remove_devfreq() does not have @skip anymore after 3.16.
The comment for _remove_devfreq() has been updated correspondingly.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-30 17:09:41 +09:00
Ãrjan Eide
bd7e927705 PM / devfreq: Export helper functions for drivers
These functions are indended for use by drivers and should be available
also when the driver is built as a module.

Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ãrjan Eide <orjan.eide@arm.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-09-29 20:22:22 +09:00
Chanwoo Choi
d5b040d0ca PM / devfreq: Add devm_devfreq_{register,unregister}_opp_notfier function
This patch add resource-managed function for devfreq opp as following
functions. The devm_devfreq_register_opp_notifier() manages automatically
the registration of devfreq opp using device resource management.
- devm_devfreq_register_opp_notifier
- devm_devfreq_unregister_opp_notifier()

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24 22:33:41 +09:00
Chanwoo Choi
8cd84092d3 PM / devfreq: Add resource-managed function for devfreq device
This patch add resource-managed function for devfreq device as following
functions. The devm_devfreq_add_device() manages automatically the memory
of devfreq device using device resource management.
- devm_devfreq_add_device()
- devm_devfreq_remove_device()

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24 22:33:38 +09:00
Chanwoo Choi
585fc83ece PM / devfreq: Fix devfreq_remove_device() to improve the sequence of resource free
This patch modify devfreq_remove_device() to improve the sequence of resource
free. If executing existing devfreq_remove_device(), this function always
executes _remove_devfreq() twice. In result, second _remove_devfreq() always
return error value. So, This patch resolves complicated function sequence
as following:

[Flow sequence before modification]
devfreq_remove_device()
   _remove_devfreq(devfreq, false)
      kfree(devfreq);  /* Free devfreq */
      if (!skip ...) { /* skip is false */
         device_unregister(&devfreq->dev)
         put_device(&devfreq->dev);
            ...
            dev->release()
               devfreq_dev_release()
                  _remove_devfreq(devfreq, true) <- Recall to free devfreq
                  /*
		   * Always return error without freeing resource because
		   * already _remove_devfreq() frees the memory of devfreq.
		   */
   }

[Flow sequence after modification]
devfreq_remove_device
   device_unregister(&devfreq->dev)
   put_device(&devfreq->dev);
      ..
      dev->release()
         devfreq_dev_release()
            _remove_devfreq()
               kfree(devfreq); /* Free devfreq */

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[Merge conflict resolved by MyungJoo]
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24 22:33:34 +09:00
Saravana Kannan
e35d35a1c0 PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugs
The current devfreq_update_status() has the following bugs:
- If previous frequency doesn't have a valid level, it does an out of bounds
  access into the trans_table and causes memory corruption.
- When the new frequency doesn't have a valid level, the time spent in the
  new frequency is counted towards the next valid frequency switch instead of
  being ignored.
- The time spent on the previous frequency is added to the new frequency's
  stats instead of the previous frequency's stats.

This patch fixes all of this.

Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-03-21 11:16:30 +09:00
Rafael J. Wysocki
230b4b376e Merge branch 'pm-devfreq'
* pm-devfreq:
  PM / devfreq: create_freezable_workqueue() doesn't return an ERR_PTR
  PM / devfreq: Remove duplicate header file inclusion in exynos5_bus.c
  PM / devfreq: Use devm_* APIs in exynos5_bus.c
  PM / devfreq: Remove redundant platform_set_drvdata() in exynos5_bus.c
  PM / devfreq: Fix incorrect usage of IS_ERR_OR_NULL in exynos5_bus.c
2013-11-07 19:24:20 +01:00
Dan Carpenter
ea7f4548c9 PM / devfreq: create_freezable_workqueue() doesn't return an ERR_PTR
The create_freezable_workqueue() function returns a NULL on error and
not an ERR_PTR.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2013-10-28 20:18:30 +09:00
Nishanth Menon
e4db1c7439 PM / OPP: rename header to linux/pm_opp.h
Since Operating Performance Points (OPP) functions are specific
to device specific power management, be specific and rename opp.h
to pm_opp.h

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-25 22:33:23 +02:00