tpacket_fill_skb() can return a negative value (-errno) which
is stored in tp_len variable. In that case the following
condition will be (but shouldn't be) true:
tp_len > dev->mtu + dev->hard_header_len
as dev->mtu and dev->hard_header_len are both unsigned.
That may lead to just returning an incorrect EMSGSIZE errno
to the user.
Fixes: 52f1454f62 ("packet: allow to transmit +4 byte in TX_RING slot for VLAN case")
Signed-off-by: Alexander Drozdov <al.drozdov@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dell Vostro 5480 (1028:069a) needs the very same quirk used for Vostro
5470 model to make bass speakers properly working.
Reported-and-tested-by: Paulo Roberto de Oliveira Castro <p.oliveira.castro@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When arp is off on a device, and ioctl(SIOCGARP) is queried,
a buggy answer is given with MAC address of the device, instead
of the mac address of the destination/gateway.
We filter out NUD_NOARP neighbours for /proc/net/arp,
we must do the same for SIOCGARP ioctl.
Tested:
lpaa23:~# ./arp 10.246.7.190
MAC=00:01:e8:22:cb:1d // correct answer
lpaa23:~# ip link set dev eth0 arp off
lpaa23:~# cat /proc/net/arp # check arp table is now 'empty'
IP address HW type Flags HW address Mask Device
lpaa23:~# ./arp 10.246.7.190
MAC=00:1a:11:c3:0d:7f // buggy answer before patch (this is eth0 mac)
After patch :
lpaa23:~# ip link set dev eth0 arp off
lpaa23:~# ./arp 10.246.7.190
ioctl(SIOCGARP) failed: No such device or address
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Vytautas Valancius <valas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This notification causes the FIB to be updated, which is not needed
because the address already exists, and more importantly it may undo
intentional changes that were made to the FIB after the address was
originally added. (As a point of comparison, when an address becomes
deprecated because its preferred lifetime expired, a notification on
this chain is not generated.)
The motivation for this commit is fixing an incompatibility between
DHCP clients which set and update the address lifetime according to
the lease, and a commercial VPN client which replaces kernel routes
in a way that outbound traffic is sent only through the tunnel (and
disconnects if any further route changes are detected via netlink).
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
These should be handled only by the respective STP which is in control.
They become problematic for devices with limited resources with many
ports because the hold_timer is per port and fires each second and the
hello timer fires each 2 seconds even though it's global. While in
user-space STP mode these timers are completely unnecessary so it's better
to keep them off.
Also ensure that when the bridge is up these timers are started only when
running with kernel STP.
Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't log remote attribute contents, and instead write them
synchronously before we commit the block allocation and attribute
tree update transaction. As a result we are writing to the allocated
space before the allcoation has been made permanent.
As a result, we cannot consider this allocation to be a metadata
allocation. Metadata allocation can take blocks from the free list
and so reuse them before the transaction that freed the block is
committed to disk. This behaviour is perfectly fine for journalled
metadata changes as log recovery will ensure the free operation is
replayed before the overwrite, but for remote attribute writes this
is not the case.
Hence we have to consider the remote attribute blocks to contain
data and allocate accordingly. We do this by dropping the
XFS_BMAPI_METADATA flag from the block allocation. This means the
allocation will not use blocks that are on the busy list without
first ensuring that the freeing transaction has been committed to
disk and the blocks removed from the busy list. This ensures we will
never overwrite a freed block without first ensuring that it is
really free.
cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In recent testing, a system that crashed failed log recovery on
restart with a bad symlink buffer magic number:
XFS (vda): Starting recovery (logdev: internal)
XFS (vda): Bad symlink block magic!
XFS: Assertion failed: 0, file: fs/xfs/xfs_log_recover.c, line: 2060
On examination of the log via xfs_logprint, none of the symlink
buffers in the log had a bad magic number, nor were any other types
of buffer log format headers mis-identified as symlink buffers.
Tracing was used to find the buffer the kernel was tripping over,
and xfs_db identified it's contents as:
000: 5841524d 00000000 00000346 64d82b48 8983e692 d71e4680 a5f49e2c b317576e
020: 00000000 00602038 00000000 006034ce d0020000 00000000 4d4d4d4d 4d4d4d4d
040: 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d
060: 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d
.....
This is a remote attribute buffer, which are notable in that they
are not logged but are instead written synchronously by the remote
attribute code so that they exist on disk before the attribute
transactions are committed to the journal.
The above remote attribute block has an invalid LSN in it - cycle
0xd002000, block 0 - which means when log recovery comes along to
determine if the transaction that writes to the underlying block
should be replayed, it sees a block that has a future LSN and so
does not replay the buffer data in the transaction. Instead, it
validates the buffer magic number and attaches the buffer verifier
to it. It is this buffer magic number check that is failing in the
above assert, indicating that we skipped replay due to the LSN of
the underlying buffer.
The problem here is that the remote attribute buffers cannot have a
valid LSN placed into them, because the transaction that contains
the attribute tree pointer changes and the block allocation that the
attribute data is being written to hasn't yet been committed. Hence
the LSN field in the attribute block is completely unwritten,
thereby leaving the underlying contents of the block in the LSN
field. It could have any value, and hence a future overwrite of the
block by log recovery may or may not work correctly.
Fix this by always writing an invalid LSN to the remote attribute
block, as any buffer in log recovery that needs to write over the
remote attribute should occur. We are protected from having old data
written over the attribute by the fact that freeing the block before
the remote attribute is written will result in the buffer being
marked stale in the log and so all changes prior to the buffer stale
transaction will be cancelled by log recovery.
Hence it is safe to ignore the LSN in the case or synchronously
written, unlogged metadata such as remote attribute blocks, and to
ensure we do that correctly, we need to write an invalid LSN to all
remote attribute blocks to trigger immediate recovery of metadata
that is written over the top.
As a further protection for filesystems that may already have remote
attribute blocks with bad LSNs on disk, change the log recovery code
to always trigger immediate recovery of metadata over remote
attribute blocks.
cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When modifying the patch series to handle the XFS MMAP_LOCK nesting
of page faults, I botched the conversion of the read page fault
path, and so it is only every calling through the page cache. Re-add
the necessary __dax_fault() call for such files.
Because the get_blocks callback on read faults may not set up the
mapping buffer correctly to allow unwritten extent completion to be
run, we need to allow callers of __dax_fault() to pass a null
complete_unwritten() callback. The DAX code always zeros the
unwritten page when it is read faulted so there are no stale data
exposure issues with not doing the conversion. The only downside
will be the potential for increased CPU overhead on repeated read
faults of the same page. If this proves to be a problem, then the
filesystem needs to fix it's get_block callback and provide a
convert_unwritten() callback to the read fault path.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull key fix from James Morris.
Fix memory leak.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
KEYS: ensure we free the assoc array edit if edit is valid
system table into a char array with a size of 100 bytes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVt8LEAAoJEGvWsS0AyF7xg4gP/iZweJzesP29V1O6l+PxqEMU
vTJYVEUBmzso2bt8GYb8EFhL3CdPmw5azGNksgOICL2Knd+sVlGLtMmfMupN7H1M
j+f7o546UCw3g+e0huKJvGmBuNFJkTleXAh+KRWSlFDpt7IVqzjT1njVeF+xvd0b
JG+a3+xPYCUuOUDv4mCVdQ3zueLhLBy/Mv3QWKAGyX0JdraT4PkgHSiD1c46YeAt
l4uymuTGXJlSMTdwQK50QDevH5Nh28c7TaksH1OkZPHNxDogWuTeAUpFRpbtWGpQ
VrGExlb/CYT14R6SvlG5Jz80BLlW0mHVYgwXXJZ+Z/tKquOnYR0B4ZnX7R8q7YgM
g6YKOAPNhiifgwBbasXPt46po7SeBV0/qdUuOVpjdtZXKlUo7O57bGDcdchxJ5V5
WDuXJoA3wDcRUg99eEG8cPl0yb5DAzUhR0n+1WvQ7ON7G978QHW5YpXWQ13zEHGV
rIDZelU+o2Yr84YIZBmuo7qip4xQU7AJaHmqs9GSxyNA1Kip8jJD2UJ/+7PW/l+F
VsNasShQleiC+9nIkOhzkpgfy1BLb7+8PkfIgJiz6nz3i9PpTHKHsCAHOURoGjuP
g2wHGxOsjcygkqkJQTMwlaGjhWbm7uP40d88kHmYqYfVDwLtYXdXsv/oH+zDN+zN
UUFU9EIDgOkEocRNEMf+
=phfS
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix buffer overflow when UTF-16 UEFI vendor string is copied from the
system table into a char array with a size of 100 bytes"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/efi: map the entire UEFI vendor string before reading it
Pull AVR32 fix from Hans-Christian Egtvedt.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
avr32: handle NULL as a valid clock object
This reverts commit 7d01cd261c because
with given FRAME_MAXSIZE of 257 the check will never trigger and it
causes warnings from GCC (with -Wtype-limits). Also the check was
incorrect as it was not accounting for the already read 2 bytes of data
stored in the buffer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVt6LUAAoJEMhvYp4jgsXiK20H/RDznl7VYtj5MSwBDJdN5cog
udeEbI7kSlQMexkZhKib004bqf1BYg/3TMt4R9IyhcESy7M2mDRgXYztErkdNJ9H
JifY6Py3JO4jb9dMMqZi7iYSucVY1AxvWzVjRVHe+VdZ/zBMG/QIZaGNhFqefmmb
cP+Uxas2tet6TrVogCrvdh11Flxra+NEvBUCB1xE0+3SMKgMxdMAYXWeCIVU+SPJ
9upL9UoH7H5Gm/mI6u/PMv0QOlfkDtcGCWSFCWNBqdYfRwHSVpbgJLlGJ5XkT1ns
9+0Ok4Qi/muKAemV3fFr5WjkLgrwd+qbmrpHtb8PTdKyd7U7ObumvEJ70+HPqME=
=n5LN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"A handful of DT related fixes for 4.2-rc"
* tag 'devicetree-fixes-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Drop owner assignment from platform and i2c driver
DEVICETREE: Misc fix for the AR7100 SPI controller binding
of: constify drv arg of of_driver_match_device stub
of: add HAS_IOMEM depends to OF_ADDRESS
Two bugfixes only here.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVt1JYAAoJECgfDbjSjVRpvNcH/A8m4Yugwcp8DWyS8vJiO1Pw
qCmGlLnu+NHHxkk/FNUbMHlCc9QZsnUcXYyt1wsE+pvuxxnxybfzN/79B/lZI8ER
KY5VtWstVQjJf0+EifXiww74tqnRosDlbbYY9ujGXWvxzuGdsF++ZtvIDjaeCNtk
jbiRsA8JOe0r7QRQgHwKzOtcMiam7bLgxQQQIHYr2HjDjXUwmHsEw2KszA0EgUbY
xmyOSp+Y33dD6ofybYpRMK7azBSz0Voy67syDgmwn106Zojz6nUZ19swyna+D9Xc
fqpLXiTXuRCiJckWqCdtk8mcTYVnBxRDfsVWDnbhD6xajIHj+4CdJhC1o7Q90ds=
=kpWQ
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vhost fixes from Michael Tsirkin:
"Two bugfixes only here"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: fix error handling for memory region alloc
vhost: actually track log eventfd file
Highlights include:
Stable patches:
- Fix a situation where the client uses the wrong (zero) stateid.
- Fix a memory leak in nfs_do_recoalesce
Bugfixes:
- Plug a memory leak when ->prepare_layoutcommit fails
- Fix an Oops in the NFSv4 open code
- Fix a backchannel deadlock
- Fix a livelock in sunrpc when sendmsg fails due to low memory availability
- Don't revalidate the mapping if both size and change attr are up to date
- Ensure we don't miss a file extension when doing pNFS
- Several fixes to handle NFSv4.1 sequence operation status bits correctly
- Several pNFS layout return bugfixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wlUD
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable patches:
- Fix a situation where the client uses the wrong (zero) stateid.
- Fix a memory leak in nfs_do_recoalesce
Bugfixes:
- Plug a memory leak when ->prepare_layoutcommit fails
- Fix an Oops in the NFSv4 open code
- Fix a backchannel deadlock
- Fix a livelock in sunrpc when sendmsg fails due to low memory
availability
- Don't revalidate the mapping if both size and change attr are up to
date
- Ensure we don't miss a file extension when doing pNFS
- Several fixes to handle NFSv4.1 sequence operation status bits
correctly
- Several pNFS layout return bugfixes"
* tag 'nfs-for-4.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits)
nfs: Fix an oops caused by using other thread's stack space in ASYNC mode
nfs: plug memory leak when ->prepare_layoutcommit fails
SUNRPC: Report TCP errors to the caller
sunrpc: translate -EAGAIN to -ENOBUFS when socket is writable.
NFSv4.2: handle NFS-specific llseek errors
NFS: Don't clear desc->pg_moreio in nfs_do_recoalesce()
NFS: Fix a memory leak in nfs_do_recoalesce
NFS: nfs_mark_for_revalidate should always set NFS_INO_REVAL_PAGECACHE
NFS: Remove the "NFS_CAP_CHANGE_ATTR" capability
NFS: Set NFS_INO_REVAL_PAGECACHE if the change attribute is uninitialised
NFS: Don't revalidate the mapping if both size and change attr are up to date
NFSv4/pnfs: Ensure we don't miss a file extension
NFSv4: We must set NFS_OPEN_STATE flag in nfs_resync_open_stateid_locked
SUNRPC: xprt_complete_bc_request must also decrement the free slot count
SUNRPC: Fix a backchannel deadlock
pNFS: Don't throw out valid layout segments
pNFS: pnfs_roc_drain() fix a race with open
pNFS: Fix races between return-on-close and layoutreturn.
pNFS: pnfs_roc_drain should return 'true' when sleeping
pNFS: Layoutreturn must invalidate all existing layout segments.
...
Pull f2fs fixes from Jaegeuk Kim.
* tag 'for-f2fs-v4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: call set_page_dirty to attach i_wb for cgroup
f2fs: handle error cases in move_encrypted_block
After commit 87549141d5 (cpufreq: Stop migrating sysfs files on
hotplug) there is a problem with CPUs that share cpufreq policy
objects with other CPUs and are initially offline.
Say CPU1 shares a policy with CPU0 which is online and is registered
first. As part of the registration process, cpufreq_add_dev() is
called for it. It creates the policy object and a symbolic link
to it from the CPU1's sysfs directory. If CPU1 is registered
subsequently and it is offline at that time, cpufreq_add_dev() will
attempt to create a symbolic link to the policy object for it, but
that link is present already, so a warning about that will be
triggered.
To avoid that warning, make cpufreq use an additional CPU mask
containing related CPUs that are actually present for each policy
object. That mask is initialized when the policy object is populated
after its creation (for the first online CPU using it) and it includes
CPUs from the "policy CPUs" mask returned by the cpufreq driver's
->init() callback that are physically present at that time. Symbolic
links to the policy are created only for the CPUs in that mask.
If cpufreq_add_dev() is invoked for an offline CPU, it checks the
new mask and only creates the symlink if the CPU was not in it (the
CPU is added to the mask at the same time).
In turn, cpufreq_remove_dev() drops the given CPU from the new mask,
removes its symlink to the policy object and returns, unless it is
the CPU owning the policy object. In that case, the policy object
is moved to a new CPU's sysfs directory or deleted if the CPU being
removed was the last user of the policy.
While at it, notice that cpufreq_remove_dev() can't fail, because
its return value is ignored, so make it ignore return values from
__cpufreq_remove_dev_prepare() and __cpufreq_remove_dev_finish()
and prevent these functions from aborting on errors returned by
__cpufreq_governor(). Also drop the now unused sif argument from
them.
Fixes: 87549141d5 (cpufreq: Stop migrating sysfs files on hotplug)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-and-tested-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit 20dacb71ad ("ACPI / PM: Rework device power management to follow
ACPI 6") changed the device power management to use D3hot if the device
in question does not have _PR3 method even if D3cold was requested by the
caller.
However, if the device has _PR3 device->power.state is also set to D3hot
instead of D3Cold after power resources have been turned off because
device->power.state will be assigned from "state" instead of
"target_state".
Next time the device is transitioned to D0, acpi_power_transition() will
find that the current power state of the device is D3hot instead of D3cold
which causes it to power down all resources required for the current
(wrong) state D3hot.
Below is a simplified ASL example of a real touch panel device which
triggers the problem:
Scope (TPL1)
{
Name (_PR0, Package (1) { \_SB.PCI0.I2C1.PXTC })
Name (_PR3, Package (1) { \_SB.PCI0.I2C1.PXTC })
...
}
In both D0 and D3hot the same power resource is required. However, when
acpi_power_transition() turns off power resources required for D3hot (as
the device is transitioned to D0) it powers down PXTC which then makes the
device to lose its power.
Fix this by assigning "target_state" to the device power state instead of
"state" that is always D3hot even for devices with valid _PR3.
Fixes: 20dacb71ad (ACPI / PM: Rework device power management to follow ACPI 6)
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
"data" is currently leaked when the prepare_layoutcommit operation
returns an error. Put the cred before taking the spinlock in that
case, take the lock and then goto out_unlock which will drop the
lock and then free "data".
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
- Add the required second clock for i.MX35 FlexCAN in device tree,
so that the device can be probed by kernel successfully.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVtxnOAAoJEFBXWFqHsHzO8ZAH/1jztrw/N5efGoJwdyvQyZLD
w/yN7otyk6b92cPJ/IIXpU/OOWeJNGIrEzidp4nJoYGa6iFlpGKdOKimtE9LVEm0
s5PllYCdnErh4d8+ae+T4lC70WHDOKN+1w8CzJzaIXA1XWUojdzpjwUvHVDpoP09
c9xRUmz/Q3D6GRhcNtFH69paVKaTN8MlfugJf6Ojr7gcyjXr38gCkM6u+WSUmMXQ
kb2uiifsYv8hibir5DkDRSBRgyUqI6guBjW1ZNABpMTjb+l3q4z6qLhA5Kqm4s98
OVpl0+R2oOa/SvAc5iIKAvqzRhtebcqvOCkd5xlsOTFOpKLFSDNmeoMa/mg9xUQ=
=sIV+
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
The i.MX fixes for 4.2, 2nd round:
- Add the required second clock for i.MX35 FlexCAN in device tree,
so that the device can be probed by kernel successfully.
* tag 'imx-fixes-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: i.MX35: Fix can support.
Signed-off-by: Olof Johansson <olof@lixom.net>
Add Maxwell to the switch statement that sets node->memtype, otherwise
all tiling information is ignored for buffers in system memory.
While we are at it, make that switch statement explicitly complain the
next time we meet a non-handled card family.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Userspace has started doing this, which upsets the display class hw
error checking in various unpleasant ways.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
__key_link_end is not freeing the associated array edit structure
and this leads to a 512 byte memory leak each time an identical
existing key is added with add_key().
The reason the add_key() system call returns okay is that
key_create_or_update() calls __key_link_begin() before checking to see
whether it can update a key directly rather than adding/replacing - which
it turns out it can. Thus __key_link() is not called through
__key_instantiate_and_link() and __key_link_end() must cancel the edit.
CVE-2015-1333
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Various minor fixes all over the place, nothing too scary.
* 'linux-4.2' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/fbcon/g80: reduce PUSH_SPACE alloc, fire ring on accel init
drm/nouveau/fbcon/gf100-: reduce RING_SPACE allocation
drm/nouveau/fbcon/nv11-: correctly account for ring space usage
drm/nouveau/bios: add proper support for opcode 0x59
drm/nouveau/bios: add 0x59 and 0x5a opcodes
drm/nouveau/disp: Use NULL for pointers
drm/nouveau/pm: fix a potential race condition when creating an engine context
drm/nouveau/pm: prevent freeing the wrong engine context
drm/nouveau/gr/gf100: wait for GR idle after GO_IDLE bundle
drm/nouveau/gr/gf100: wait on bottom half of FE's pipeline
drm/nouveau/fifo/gk104: kick channels when deactivating them
drm/nouveau/ibus/gk20a: increase SM wait timeout
drm/nouveau/platform: fix compile error if !CONFIG_IOMMU
drm/nouveau: Do not leak client objects
drm/nouveau/clk/gt215: u32->s32 for difference in req. and set clock
drm/nouveau/drm/nv04-nv40/instmem: protect access to priv->heap by mutex
drm/nouveau: hold mutex when calling nouveau_abi16_fini()
Add support for the MacBookPro12,1 model. This patch needs to be
applied together with the accompanied HID patch, as usual.
Tested-by: John Horan <knasher@gmail.com>
Tested-by: Jochen Radmacher <jradmacher@gmx.de>
Tested-by: Yang Hongyang <burnef@gmail.com>
Tested-by: Yen-Chin, Lee <coldnew.tw@gmail.com>
Tested-by: George Hilios <ghilios@gmail.com>
Tested-by: Janez Urevc <janez@janezurevc.name>
Signed-off-by: Henrik Rydberg <rydberg@bitmath.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This patch adds keyboard support for MacbookPro12,1 as WELLSPRING9
(0x0272, 0x0273, 0x0274). The touchpad is handled in a separate
bcm5974 patch, as usual.
Tested-by: John Horan <knasher@gmail.com>
Tested-by: Jochen Radmacher <jradmacher@gmx.de>
Tested-by: Yang Hongyang <burnef@gmail.com>
Tested-by: Yen-Chin, Lee <coldnew.tw@gmail.com>
Tested-by: George Hilios <ghilios@gmail.com>
Tested-by: Janez Urevc <janez@janezurevc.name>
Signed-off-by: Henrik Rydberg <rydberg@bitmath.org>
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
With the advent of the Macbook Pro 12, we see a new generation of
trackpads, capable of force sensoring and haptic feedback.
This patch prepares for the new device by adding configuration data
for the code paths that would otherwise look different.
Tested-by: John Horan <knasher@gmail.com>
Tested-by: Jochen Radmacher <jradmacher@gmx.de>
Tested-by: Yang Hongyang <burnef@gmail.com>
Tested-by: Yen-Chin, Lee <coldnew.tw@gmail.com>
Tested-by: George Hilios <ghilios@gmail.com>
Tested-by: Janez Urevc <janez@janezurevc.name>
Signed-off-by: Henrik Rydberg <rydberg@bitmath.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Make extended capabilities obtained through $10 query also available in
touchpad identification.
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When binding a PF_PACKET socket, the use count of the bound interface is
always increased with dev_hold in dev_get_by_{index,name}. However,
when rebound with the same protocol and device as in the previous bind
the use count of the interface was not decreased. Ultimately, this
caused the deletion of the interface to fail with the following message:
unregister_netdevice: waiting for dummy0 to become free. Usage count = 1
This patch moves the dev_put out of the conditional part that was only
executed when either the protocol or device changed on a bind.
Fixes: 902fefb82e ('packet: improve socket create/bind latency in some cases')
Signed-off-by: Lars Westerhoff <lars.westerhoff@newtec.eu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Network header is set with offset ETH_HLEN but it is not true for VLAN
(multiple-)tagged and results in checksum issues in lower devices.
v2: leave skb->protocol untouched (thx Vlad), comment added
v3: moved after skb_probe_transport_header() call (thx Toshiaki)
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was reported that update_suffix was taking a long time on systems where
a large number of leaves were attached to a single node. As it turns out
fib_table_flush was calling update_suffix for each leaf that didn't have all
of the aliases stripped from it. As a result, on this large node removing
one leaf would result in us calling update_suffix for every other leaf on
the node.
The fix is to just remove the calls to leaf_pull_suffix since they are
redundant as we already have a call in resize that will go through and
update the suffix length for the node before we exit out of
fib_table_flush or fib_table_flush_external.
Reported-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an architecture defines readl/writel using CPP macros, we
get the following kinds of build failure:
> > > drivers/net/ethernet/cadence/macb.c:164:1: error: macro "writel"
> > > passed 3 arguments, but takes just 2
> macb_or_gem_writel(bp, SA1B, bottom);
> ^
Rename the methods so that this doesn't happen.
Signed-off-by: David S. Miller <davem@davemloft.net>
At boot, the UTF-16 UEFI vendor string is copied from the system
table into a char array with a size of 100 bytes. However, this
size of 100 bytes is also used for memremapping() the source,
which may not be sufficient if the vendor string exceeds 50
UTF-16 characters, and the placement of the vendor string inside
a 4 KB page happens to leave the end unmapped.
So use the correct '100 * sizeof(efi_char16_t)' for the size of
the mapping.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: f84d02755f ("arm64: add EFI runtime services")
Cc: <stable@vger.kernel.org> # 3.16+
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The networking layer does not reliably report the distinction between
a non-block write failing because:
1/ the queue is too full already and
2/ a memory allocation attempt failed.
The distinction is important because in the first case it is
appropriate to retry as soon as the socket reports that it is
writable, and in the second case a small delay is required as the
socket will most likely report as writable but kmalloc could still
fail.
sk_stream_wait_memory() exhibits this distinction nicely, setting
'vm_wait' if a small wait is needed. However in the non-blocking case
it always returns -EAGAIN no matter the cause of the failure. This
-EAGAIN call get all the way to sunrpc.
The sunrpc layer expects EAGAIN to indicate the first cause, and
ENOBUFS to indicate the second. Various documentation suggests that
this is not unreasonable, but does not guarantee the desired error
codes.
The result of getting -EAGAIN when -ENOBUFS is expected is that the
send is tried again in a tight loop and soft lockups are reported.
so: add tests after calls to xs_sendpages() to translate -EAGAIN into
-ENOBUFS if the socket is writable. This cannot happen inside
xs_sendpages() as the test for "is socket writable" is different
between TCP and UDP.
With this change, the tight loop retrying xs_sendpages() becomes a
loop which only retries every 250ms, and so will not trigger a
soft-lockup warning.
It is possible that the write did fail because the queue was too full
and by the time xs_sendpages() completed, the queue was writable
again. In this case an extra 250ms delay is inserted that isn't
really needed. This circumstance suggests a degree of congestion so a
delay is not necessarily a bad thing, and it can only cause a single
250ms delay, not a series of them.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Handle NFS-specific llseek errors instead of letting them leak out to
userspace.
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
callers of vhost_kvzalloc() expect the same behaviour on
allocation error as from kmalloc/vmalloc i.e. NULL return
value. So just return vzmalloc() returned value instead of
returning ERR_PTR(-ENOMEM)
Fixes: 4de7255f7d ("vhost: extend memory regions allocation to vmalloc")
Spotted-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While reviewing vhost log code, I found out that log_file is never
set. Note: I haven't tested the change (QEMU doesn't use LOG_FD yet).
Cc: stable@vger.kernel.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Recoalescing does not affect whether or not we've already sent off
I/O, and doing so means that we end up sending a bunch of synchronous
for cases where we actually need to be using unstable writes.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the function exits early, then we must put those requests that were
not processed back onto the &mirror->pg_list so they can be cleaned up
by nfs_pgio_error().
Fixes: a7d42ddb30 ("nfs: add mirroring support to pgio layer")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
platform_driver and i2c_driver do not need to set an owner because core
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Fix the clocks property documentation and use lower case for
hex values in the example.
Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Rob Herring <robh@kernel.org>
With this change the stub has the same signature as the actual function,
preventing this compiler warning when building without CONFIG_OF:
drivers/base/property.c: In function 'fwnode_driver_match_device':
>> drivers/base/property.c:608:38: warning: passing argument 2 of 'of_driver_match_device' discards 'const' qualifier from pointer target type
return of_driver_match_device(dev, drv);
^
In file included from drivers/base/property.c:18:0:
include/linux/of_device.h:61:19: note: expected 'struct device_driver *' but argument is of type 'const struct device_driver *'
static inline int of_driver_match_device(struct device *dev,
^
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
On UML builds, of_address.c fails to compile:
../drivers/of/address.c:873:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration]
This is due to CONFIG_OF now being user selectable. Add a dependency on
HAS_IOMEM to OF_ADDRESS in order to fix this.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cryptsetup moved to gitlab. This is a leftover from commit e44f23b32d
(dm crypt: update URLs to new cryptsetup project page, 2015-04-05).
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
