Something like creating a client with setclientid and then trying to
confirm it with create_session may not crash the server, but I'm not
completely positive of that, and in any case it's obviously bad client
behavior.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
locks.c doesn't use the BKL anymore and there is no fi_perfile field.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit d5497fc693 "nfsd4: move rq_flavor
into svc_cred" forgot to remove cl_flavor from the client, leaving two
places (cl_flavor and cl_cred.cr_flavor) for the flavor to be stored.
After that patch, the latter was the one that was updated, but the
former was the one that the callback used.
Symptoms were a long delay on utime(). This is because the utime()
generated a setattr which recalled a delegation, but the cb_recall was
ignored by the client because it had the wrong security flavor.
Cc: stable@vger.kernel.org
Tested-by: Jamie Heilman <jamie@audible.transient.net>
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSd's boot_time represents grace period start point in time.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Passed network namespace replaced hard-coded init_net
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to RFC 5661, the TEST_STATEID operation is not allowed to
return NFS4ERR_STALE_STATEID. In addition, RFC 5661 says:
15.1.16.5. NFS4ERR_STALE_STATEID (Error Code 10023)
A stateid generated by an earlier server instance was used. This
error is moot in NFSv4.1 because all operations that take a stateid
MUST be preceded by the SEQUENCE operation, and the earlier server
instance is detected by the session infrastructure that supports
SEQUENCE.
I triggered NFS4ERR_STALE_STATEID while testing the Linux client's
NOGRACE recovery. Bruce suggested an additional test that could be
useful to client developers.
Lastly, RFC 5661, section 18.48.3 has this:
o Special stateids are always considered invalid (they result in the
error code NFS4ERR_BAD_STATEID).
An explicit check is made for those state IDs to avoid printk noise.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Instead of keeping the principal name associated with a request in a
structure that's private to auth_gss and using an accessor function,
move it to svc_cred.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Abstract out the mechanism that we use to track clients into a set of
client name tracking functions.
This gives us a mechanism to plug in a new set of client tracking
functions without disturbing the callers. It also gives us a way to
decide on what tracking scheme to use at runtime.
For now, this just looks like pointless abstraction, but later we'll
add a new alternate scheme for tracking clients on stable storage.
Note too that this patch anticipates the eventual containerization
of this code by passing in struct net pointers in places. No attempt
is made to containerize the legacy client tracker however.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We'll need a way to flag the nfs4_client as already being recorded on
stable storage so that we don't continually upcall. Currently, that's
recorded in the cl_firststate field of the client struct. Using an
entire u32 to store a flag is rather wasteful though.
The cl_cb_flags field is only using 2 bits right now, so repurpose that
to a generic flags field. Rename NFSD4_CLIENT_KILL to
NFSD4_CLIENT_CB_KILL to make it evident that it's part of the callback
flags. Add a mask that we can use for existing checks that look to see
whether any flags are set, so that the new flags don't interfere.
Convert all references to cl_firstate to the NFSD4_CLIENT_STABLE flag,
and add a new NFSD4_CLIENT_RECLAIM_COMPLETE flag.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The session client is manipulated under the client_lock hence
both free_session and nfsd4_del_conns must be called under this lock.
This patch adds a BUG_ON that checks this condition in the
respective functions and implements the missing locks.
nfsd4_{get,put}_session helpers were moved to the C file that uses them
so to prevent use from external files and an unlocked version of
nfsd4_put_session is provided for external use from nfs4xdr.c
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This fixes an oops when a buggy client tries to use an initial seqid of
0 on a new slot, which we may misinterpret as a replay.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Combine two booleans into a single flag field, move the smaller fields
to the end.
(In practice this doesn't make the struct any smaller. But we'll be
adding another flag here soon.)
Remove some debugging code that doesn't look useful, while we're in the
neighborhood.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Address the possible performance regression mentioned in "nfsd4: hash
lockowners to simplify RELEASE_LOCKOWNER" by providing a separate
(lockowner, inode) hash.
Really, I doubt this matters much, but I think it's likely we'll change
these data structures here and I'd rather that the need for (owner,
inode) lookups be well-documented.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move idr preallocation out of stateid initialization, into stateid
allocation, so that we no longer have to handle any errors from the
former.
This is a little subtle due to the way the idr code manages these
preallocated items--document that in comments.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If process_open1() creates a new open owner, but the open later fails,
the current code will leave the open owner around. It won't be on the
close_lru list, and the client isn't expected to send a CLOSE, so it
will hang around as long as the client does.
Similarly, if process_open1() removes an existing open owner from the
close lru, anticipating that an open owner that previously had no
associated stateid's now will, but the open subsequently fails, then
we'll again be left with the same leak.
Fix both problems.
Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In response to some review comments, get rid of the somewhat obscure
for-loop with bitops, and improve a comment.
Reported-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use a separate stateid idr per client, and lookup a stateid by first
finding the client, then looking up the stateid relative to that client.
Also some minor refactoring.
This allows us to improve error returns: we can return expired when the
clientid is not found and bad_stateid when the clientid is found but not
the stateid, as opposed to returning expired for both cases.
I hope this will also help to replace the state lock mostly by a
per-client lock, but that hasn't been done yet.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Test_stateid is 4.1-only and only allowed after a sequence operation, so
this check is unnecessary.
Cc: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The idr system is designed exactly for generating id and looking up
integer id's. Thanks to Trond for pointing it out.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Look up closed stateid's in the stateid hash like any other stateid
rather than searching the close lru.
This is simpler, and fixes a bug: currently we handle only the case of a
close that is the last close for a given stateowner, but not the case of
a close for a stateowner that still has active opens on other files.
Thus in a case like:
open(owner, file1)
open(owner, file2)
close(owner, file2)
close(owner, file2)
the final close won't be recognized as a retransmission.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Including the full clientid in the on-the-wire stateid allows more
reliable detection of bad vs. expired stateid's, simplifies code, and
ensures we won't reuse the opaque part of the stateid (as we currently
do when the same openowner closes and reopens the same file).
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Keep around an unhashed copy of the final stateid after the last close
using an openowner, and when identifying a replay, match against that
stateid instead of just against the open owner id. Free it the next
time the seqid is bumped or the stateowner is destroyed.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We want delegations to share more with open/lock stateid's, so first
we'll pull out some of the common stuff we want to share.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move most of this into helper functions. Also move the non-CONFIRM case
into caller, providing a helper function for that purpose.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The stateowner has some fields that only make sense for openowners, and
some that only make sense for lockowners, and I find it a lot clearer if
those are separated out.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the CLOSE_STATE case into the unique caller that cares about it
rather than putting it in preprocess_seqid_op.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Follow the recommendation from rfc3530bis for stateid generation number
wraparound, simplify some code, and fix or remove incorrect comments.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The set of errors here does *not* agree with the set of errors specified
in the rfc!
While we're there, turn this macros into a function, for the usual
reasons, and move it to the one place where it's actually used.
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This operation is used by the client to check the validity of a list of
stateids.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Instead of acquiring one lease each time another client opens a file,
nfsd can acquire just one lease to represent all of them, and reference
count it to determine when to release it.
This fixes a regression introduced by
c45821d263 "locks: eliminate fl_mylease
callback": after that patch, only the struct file * is used to determine
who owns a given lease. But since we recently converted the server to
share a single struct file per open, if we acquire multiple leases on
the same file from nfsd, it then becomes impossible on unlocking a lease
to determine which of those leases (all of whom share the same struct
file *) we meant to remove.
Thanks to Takashi Iwai <tiwai@suse.de> for catching a bug in a previous
version of this patch.
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If we lose the backchannel and then the client repairs the problem,
resend any callbacks.
We use a new cb_done flag to track whether there is still work to be
done for the callback or whether it can be destroyed with the rpc.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If this loses any backchannel, make sure we have a chance to notice that
and set the sequence flags.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Distinguish between when the callback channel is known to be down, and
when it is not yet confirmed. This will be useful in the 4.1 case.
Also, we don't seem to be using the fact that this field is atomic.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Basic xdr and processing for BIND_CONN_TO_SESSION. This adds a
connection to the list of connections associated with a session.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
when callback is generated in NFSv4 server, it doesn't set the source
address. When an alias IP is utilized on NFSv4 server and suppose the
client is accessing via that alias IP (e.g. eth0:0), the client invokes
the callback to the IP address that is set on the original device (e.g.
eth0). This behavior results in timeout of xprt.
The patch sets the IP address that the client should invoke callback to.
Signed-off-by: Takuma Umeya <tumeya@redhat.com>
[bfields@redhat.com: Simplify gen_callback arguments, use helper function]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
