Commit Graph

123 Commits

Author SHA1 Message Date
Jiri Slaby
d61c72e52b DMI: add dmi_match
Add a wrapper for testing system_info which will handle also NULL
system infos.

This will be used by the ata PIIX driver.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alexandru Romanescu <a_romanescu@yahoo.co.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-29 07:39:34 -05:00
Linus Torvalds
0191b625ca Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
  net: Allow dependancies of FDDI & Tokenring to be modular.
  igb: Fix build warning when DCA is disabled.
  net: Fix warning fallout from recent NAPI interface changes.
  gro: Fix potential use after free
  sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
  sfc: When disabling the NIC, close the device rather than unregistering it
  sfc: SFT9001: Add cable diagnostics
  sfc: Add support for multiple PHY self-tests
  sfc: Merge top-level functions for self-tests
  sfc: Clean up PHY mode management in loopback self-test
  sfc: Fix unreliable link detection in some loopback modes
  sfc: Generate unique names for per-NIC workqueues
  802.3ad: use standard ethhdr instead of ad_header
  802.3ad: generalize out mac address initializer
  802.3ad: initialize ports LACPDU from const initializer
  802.3ad: remove typedef around ad_system
  802.3ad: turn ports is_individual into a bool
  802.3ad: turn ports is_enabled into a bool
  802.3ad: make ntt bool
  ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
  ...

Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
2008-12-28 12:49:40 -08:00
Ingo Molnar
fa623d1b02 Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/detect-hyper', 'x86/doc', 'x86/dumpstack', 'x86/early-printk', 'x86/fpu', 'x86/idle', 'x86/io', 'x86/memory-corruption-check', 'x86/microcode', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/pat2', 'x86/pci-ioapic-boot-irq-quirks', 'x86/ptrace', 'x86/quirks', 'x86/reboot', 'x86/setup-memory', 'x86/signal', 'x86/sparse-fixes', 'x86/time', 'x86/uv' and 'x86/xen' into x86/core 2008-12-23 16:27:23 +01:00
David S. Miller
7e452baf6b Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/message/fusion/mptlan.c
	drivers/net/sfc/ethtool.c
	net/mac80211/debugfs_sta.c
2008-11-11 15:43:02 -08:00
Alan Cox
8638545c36 trivial: dmi_scan typo
As we've lost our trivial maintainer for the moment I'll send this
directly. Only touches a comment

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-07 08:25:43 -08:00
Alok Kataria
fd8cd7e191 x86: vmware: look for DMI string in the product serial key
Impact: Should permit VMware detection on older platforms where the
vendor is changed.  Could theoretically cause a regression if some
weird serial number scheme contains the string "VMware" by pure
chance.  Seems unlikely, especially with the mixed case.

In some user configured cases, VMware may choose not to put a VMware specific
DMI string, but the product serial key is always there and is VMware specific.
Add a interface to check the serial key, when checking for VMware in the DMI
information.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-04 13:59:00 -08:00
Harvey Harrison
63779436ab drivers: replace NIPQUAD()
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31 00:56:00 -07:00
Harvey Harrison
5b095d9892 net: replace %p6 with %pI6
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29 12:52:50 -07:00
Harvey Harrison
1afa67f5e7 misc: replace NIP6_FMT with %p6 format specifier
The iscsi_ibft.c changes are almost certainly a bugfix as the
pointer 'ip' is a u8 *, so they never print the last 8 bytes
of the IPv6 address, and the eight bytes they do print have
a zero byte with them in each 16-bit word.

Other than that, this should cause no difference in functionality.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28 16:06:44 -07:00
Parag Warudkar
01e8ef11bc x86: sysfs: kill owner field from attribute
Tejun's commit 7b595756ec made sysfs
attribute->owner unnecessary.  But the field was left in the structure to
ease the merge.  It's been over a year since that change and it is now
time to start killing attribute->owner along with its users - one arch at
a time!

This patch is attempt #1 to get rid of attribute->owner only for
CONFIG_X86_64 or CONFIG_X86_32 .  We will deal with other arches later on
as and when possible - avr32 will be the next since that is something I
can test.  Compile (make allyesconfig / make allmodconfig / custom config)
and boot tested.

akpm: the idea is that we put the declaration of sttribute.owner inside
`#ifndef CONFIG_X86'.  But that proved to be too ambitious for now because
new usages kept on turning up in subsystem trees.

[akpm: remove the ifdef for now]
Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:42 -07:00
Linus Torvalds
e533b22705 Merge branch 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  do_generic_file_read: s/EINTR/EIO/ if lock_page_killable() fails
  softirq, warning fix: correct a format to avoid a warning
  softirqs, debug: preemption check
  x86, pci-hotplug, calgary / rio: fix EBDA ioremap()
  IO resources, x86: ioremap sanity check to catch mapping requests exceeding, fix
  IO resources, x86: ioremap sanity check to catch mapping requests exceeding the BAR sizes
  softlockup: Documentation/sysctl/kernel.txt: fix softlockup_thresh description
  dmi scan: warn about too early calls to dmi_check_system()
  generic: redefine resource_size_t as phys_addr_t
  generic: make PFN_PHYS explicitly return phys_addr_t
  generic: add phys_addr_t for holding physical addresses
  softirq: allocate less vectors
  IO resources: fix/remove printk
  printk: robustify printk, update comment
  printk: robustify printk, fix #2
  printk: robustify printk, fix
  printk: robustify printk

Fixed up conflicts in:
	arch/powerpc/include/asm/types.h
	arch/powerpc/platforms/Kconfig.cputype
manually.
2008-10-16 15:17:40 -07:00
Adrian Bunk
9cf899d125 drivers/firmware/iscsi_ibft.c: make 3 functions static
This patch makes the following needlessly global functions static:
- ibft_attr_show_initiator()
- ibft_attr_show_nic()
- ibft_attr_show_target()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Konrad Rzeszutek <ketuzsezr@darnok.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:48 -07:00
Ingo Molnar
9a22b6e76b dmi scan: warn about too early calls to dmi_check_system()
It happened to me recently that i added a dmi_check_system() quirk
in a too early codepath, and it was silently ignored because all the
DMI tables and strings were still empty.

As this situation is clearly a programming error / kernel bug,
warn when it happens, instead of silently ignoring quirks.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-18 12:52:29 +02:00
Mike Christie
bb8fb4e684 ibft: fix target info parsing in ibft module
I got this patch through Red Hat's bugzilla from the bug submitter and
patch creator.  I have just fixed it up so it applies without fuzz to
upstream kernels.

Original patch and description from Shyam kumar Iyer:

The issue [ibft module not displaying targets with short names] is because
of an offset calculatation error in the iscsi_ibft.c code.  Due to this
error directory structure for the target in /sys/firmware/ibft does not
get created and so the initiator is unable to connect to the target.

Note that this bug surfaced only with an name that had a short section at
the end.  eg: "iqn.1984-05.com.dell:dell".  It did not surface when the
iqn's had a longer section at the end.  eg:
"iqn.2001-04.com.example:storage.disk2.sys1.xyz"

So, the eot_offset was calculated such that an extra 48 bytes i.e.  the
size of the ibft_header which has already been accounted was subtracted
twice.

This was not evident with longer iqn names because they would overshoot
the total ibft length more than 48 bytes and thus would escape the bug.

Signed-off-by: Shyam Kumar Iyer <shyam_iyer@dell.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Konrad Rzeszutek <konrad@virtualiron.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-02 19:21:40 -07:00
Bernhard Walle
31bad9246b firmware/memmap: cleanup
Various cleanup the drivers/firmware/memmap (after review by AKPM):

    - fix kdoc to conform to the standard
    - move kdoc from header to implementation files
    - remove superfluous WARN_ON() after kmalloc()
    - WARN_ON(x); if (!x) -> if(!WARN_ON(x))
    - improve some comments

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12 16:07:31 -07:00
Jan Beulich
26c131c71e iscsi_ibft_find: fix modpost warning
Exporting __init functions is wrong.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30 09:41:44 -07:00
Ingo Molnar
414f746d23 Merge branch 'linus' into cpus4096 2008-07-28 21:14:43 +02:00
Randy Dunlap
78681ac08a firmware: fix memmap printk format warnings
Fix firmware/memmap printk format warnings:

  drivers/firmware/memmap.c:156: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t'
  drivers/firmware/memmap.c:161: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Bernhard Walle <bwalle@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 20:16:48 -07:00
Mike Travis
0bc3cc03fa cpumask: change cpumask_of_cpu_ptr to use new cpumask_of_cpu
* Replace previous instances of the cpumask_of_cpu_ptr* macros
    with a the new (lvalue capable) generic cpumask_of_cpu().

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26 16:40:33 +02:00
Akinobu Mita
25377479de dell_rbu: use memory_read_from_buffer()
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Abhay Salunke <Abhay_Salunke@dell.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:44 -07:00
Akinobu Mita
abe19b7b82 dcdbas: use memory_read_from_buffer()
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Doug Warzecha <Douglas_Warzecha@dell.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:44 -07:00
Mike Travis
65c0118453 cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr
* This patch replaces the dangerous lvalue version of cpumask_of_cpu
    with new cpumask_of_cpu_ptr macros.  These are patterned after the
    node_to_cpumask_ptr macros.

    In general terms, if there is a cpumask_of_cpu_map[] then a pointer to
    the cpumask_of_cpu_map[cpu] entry is used.  The cpumask_of_cpu_map
    is provided when there is a large NR_CPUS count, reducing
    greatly the amount of code generated and stack space used for
    cpumask_of_cpu().  The pointer to the cpumask_t value is needed for
    calling set_cpus_allowed_ptr() to reduce the amount of stack space
    needed to pass the cpumask_t value.

    If there isn't a cpumask_of_cpu_map[], then a temporary variable is
    declared and filled in with value from cpumask_of_cpu(cpu) as well as
    a pointer variable pointing to this temporary variable.  Afterwards,
    the pointer is used to reference the cpumask value.  The compiler
    will optimize out the extra dereference through the pointer as well
    as the stack space used for the pointer, resulting in identical code.

    A good example of the orthogonal usages is in net/sunrpc/svc.c:

	case SVC_POOL_PERCPU:
	{
		unsigned int cpu = m->pool_to[pidx];
		cpumask_of_cpu_ptr(cpumask, cpu);

		*oldmask = current->cpus_allowed;
		set_cpus_allowed_ptr(current, cpumask);
		return 1;
	}
	case SVC_POOL_PERNODE:
	{
		unsigned int node = m->pool_to[pidx];
		node_to_cpumask_ptr(nodecpumask, node);

		*oldmask = current->cpus_allowed;
		set_cpus_allowed_ptr(current, nodecpumask);
		return 1;
	}

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 22:02:57 +02:00
David Woodhouse
751851af7a Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Conflicts:

	sound/pci/Kconfig
2008-07-14 15:51:11 -07:00
Greg Kroah-Hartman
c6c1c94e82 dell_rbu: firmware data is const
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10 14:26:42 +01:00
Bernhard Walle
69ac9cd629 sysfs: add /sys/firmware/memmap
This patch adds /sys/firmware/memmap interface that represents the BIOS
(or Firmware) provided memory map. The tree looks like:

    /sys/firmware/memmap/0/start   (hex number)
                           end     (hex number)
                           type    (string)
    ...                 /1/start
                           end
                           type

With the following shell snippet one can print the memory map in the same form
the kernel prints itself when booting on x86 (the E820 map).

  --------- 8< --------------------------
    #!/bin/sh
    cd /sys/firmware/memmap
    for dir in * ; do
        start=$(cat $dir/start)
        end=$(cat $dir/end)
        type=$(cat $dir/type)
        printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type"
    done
  --------- >8 --------------------------

That patch only provides the needed interface:

 1. The sysfs interface.
 2. The structure and enumeration definition.
 3. The function firmware_map_add() and firmware_map_add_early()
    that should be called from architecture code (E820/EFI, for
    example) to add the contents to the interface.

If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does
nothing without cluttering the architecture-specific code with #ifdef's.

The purpose of the new interface is kexec: While /proc/iomem represents
the *used* memory map (e.g. modified via kernel parameters like 'memmap'
and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory
map provided via the firmware. So kexec can:

 - use the original memory map for rebooting,
 - use the /proc/iomem for setting up the ELF core headers for kdump
   case that should only represent the memory of the system.

The patch has been tested on i386 and x86_64.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Acked-by: Greg KH <gregkh@suse.de>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: kexec@lists.infradead.org
Cc: yhlu.kernel@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 17:55:41 +02:00
Ingo Molnar
896395c290 Merge branch 'linus' into tmp.x86.mpparse.new 2008-07-08 10:32:56 +02:00
Alexey Dobriyan
f6266e3471 edd: fix incorrect return of 1 from module_init
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06 11:29:09 -07:00
Paul Jackson
cb5dd7c104 x86 boot: add header comment to dmi.h stating what it is
The "dmi.h" file did not state anywhere in the file what "DMI" was.
For those who know, it's obvious.  For the rest of us, I added a
brief opening comment.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25 10:55:11 +02:00
Tim Gardner
8c4dd60682 edd: add default mode CONFIG_EDD_OFF=n, override with edd={on,off}
Add a kernel parameter option to 'edd' to enable/disable BIOS Enhanced Disk
Drive Services.  CONFIG_EDD_OFF disables EDD while still compiling EDD into
the kernel.  Default behavior can be forced using 'edd=on' or 'edd=off' as
a kernel parameter.

[akpm@linux-foundation.org: fix kernel-parameters.txt]
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:23 -07:00
Harvey Harrison
eecd58536a firmware: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Doug Warzecha <Douglas_Warzecha@dell.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:03 -07:00
Harvey Harrison
a01e035ebb drivers: fix integer as NULL pointer warnings
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 17:31:13 -07:00
Linus Torvalds
e80ab411e5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits)
  SCSI: convert struct class_device to struct device
  DRM: remove unused dev_class
  IB: rename "dev" to "srp_dev" in srp_host structure
  IB: convert struct class_device to struct device
  memstick: convert struct class_device to struct device
  driver core: replace remaining __FUNCTION__ occurrences
  sysfs: refill attribute buffer when reading from offset 0
  PM: Remove destroy_suspended_device()
  Firmware: add iSCSI iBFT Support
  PM: Remove legacy PM (fix)
  Kobject: Replace list_for_each() with list_for_each_entry().
  SYSFS: Explicitly include required header file slab.h.
  Driver core: make device_is_registered() work for class devices
  PM: Convert wakeup flag accessors to inline functions
  PM: Make wakeup flags available whenever CONFIG_PM is set
  PM: Fix misuse of wakeup flag accessors in serial core
  Driver core: Call device_pm_add() after bus_add_device() in device_add()
  PM: Handle device registrations during suspend/resume
  block: send disk "change" event for rescan_partitions()
  sysdev: detect multiple driver registrations
  ...

Fixed trivial conflict in include/linux/memory.h due to semaphore header
file change (made irrelevant by the change to mutex).
2008-04-21 15:49:58 -07:00
Linus Torvalds
429f731dea Merge branch 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc
* 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc:
  Deprecate the asm/semaphore.h files in feature-removal-schedule.
  Convert asm/semaphore.h users to linux/semaphore.h
  security: Remove unnecessary inclusions of asm/semaphore.h
  lib: Remove unnecessary inclusions of asm/semaphore.h
  kernel: Remove unnecessary inclusions of asm/semaphore.h
  include: Remove unnecessary inclusions of asm/semaphore.h
  fs: Remove unnecessary inclusions of asm/semaphore.h
  drivers: Remove unnecessary inclusions of asm/semaphore.h
  net: Remove unnecessary inclusions of asm/semaphore.h
  arch: Remove unnecessary inclusions of asm/semaphore.h
2008-04-21 15:41:27 -07:00
Konrad Rzeszutek
138fe4e069 Firmware: add iSCSI iBFT Support
Add /sysfs/firmware/ibft/[initiator|targetX|ethernetX] directories along with
text properties which export the the iSCSI Boot Firmware Table (iBFT)
structure.

What is iSCSI Boot Firmware Table?  It is a mechanism for the iSCSI tools to
extract from the machine NICs the iSCSI connection information so that they
can automagically mount the iSCSI share/target.  Currently the iSCSI
information is hard-coded in the initrd.  The /sysfs entries are read-only
one-name-and-value fields.

The usual set of data exposed is:

# for a in `find /sys/firmware/ibft/ -type f -print`; do  echo -n "$a: ";  cat $a; done
/sys/firmware/ibft/target0/target-name: iqn.2007.com.intel-sbx44:storage-10gb
/sys/firmware/ibft/target0/nic-assoc: 0
/sys/firmware/ibft/target0/chap-type: 0
/sys/firmware/ibft/target0/lun: 00000000
/sys/firmware/ibft/target0/port: 3260
/sys/firmware/ibft/target0/ip-addr: 192.168.79.116
/sys/firmware/ibft/target0/flags: 3
/sys/firmware/ibft/target0/index: 0
/sys/firmware/ibft/ethernet0/mac: 00:11:25:9d:8b:01
/sys/firmware/ibft/ethernet0/vlan: 0
/sys/firmware/ibft/ethernet0/gateway: 192.168.79.254
/sys/firmware/ibft/ethernet0/origin: 0
/sys/firmware/ibft/ethernet0/subnet-mask: 255.255.252.0
/sys/firmware/ibft/ethernet0/ip-addr: 192.168.77.41
/sys/firmware/ibft/ethernet0/flags: 7
/sys/firmware/ibft/ethernet0/index: 0
/sys/firmware/ibft/initiator/initiator-name: iqn.2007-07.com:konrad.initiator
/sys/firmware/ibft/initiator/flags: 3
/sys/firmware/ibft/initiator/index: 0

For full details of the IBFT structure please take a look at:
ftp://ftp.software.ibm.com/systems/support/system_x_pdf/ibm_iscsi_boot_firmware_table_v1.02.pdf

[akpm@linux-foundation.org: fix build]
Signed-off-by: Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Peter Jones <pjones@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:28 -07:00
Mike Travis
f70316dace generic: use new set_cpus_allowed_ptr function
* Use new set_cpus_allowed_ptr() function added by previous patch,
    which instead of passing the "newly allowed cpus" cpumask_t arg
    by value,  pass it by pointer:

    -int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
    +int set_cpus_allowed_ptr(struct task_struct *p, const cpumask_t *new_mask)

  * Modify CPU_MASK_ALL

Depends on:
	[sched-devel]: sched: add new set_cpus_allowed_ptr function

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:58 +02:00
Matthew Wilcox
d3135846f6 drivers: Remove unnecessary inclusions of asm/semaphore.h
None of these files use any of the functionality promised by
asm/semaphore.h.  It's possible that they rely on it dragging in some
unrelated header file, but I can't build all these files, so we'll have
fix any build failures as they come up.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18 22:16:32 -04:00
Carol Hebert
abd24df828 ipmi: change device node ordering to reflect probe order
In 2.6.14 a patch was merged which switching the order of the ipmi device
naming from in-order-of-discovery over to reverse-order-of-discovery.

So on systems with multiple BMC interfaces, the ipmi device names are being
created in reverse order relative to how they are discovered on the system
(e.g.  on an IBM x3950 multinode server with N nodes, the device name for the
BMC in the first node is /dev/ipmiN-1 and the device name for the BMC in the
last node is /dev/ipmi0, etc.).

The problem is caused by the list handling routines chosen in dmi_scan.c.
Using list_add() causes the multiple ipmi devices to be added to the device
list using a stack-paradigm and so the ipmi driver subsequently pulls them off
during initialization in LIFO order.  This patch changes the
dmi_save_ipmi_device() list handling paradigm to a queue, thereby allowing the
ipmi driver to build the ipmi device names in the order in which they are
found on the system.

Signed-off-by: Carol Hebert <cah@us.ibm.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-04 14:46:26 -07:00
Jean Delvare
43fe105a5c dmi: prevent linked list corruption
Adding the same item to a given linked list more than once is guaranteed
to break and corrupt the list.  This is however what we do in dmi_scan
since commit 79da472111 ("x86: fix DMI out
of memory problems").

Given that there is absolutely no interest in saving empty OEM strings
anyway, I propose the simple and efficient fix below: we discard the empty
OEM strings altogether.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Parag Warudkar <parag.warudkar@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23 17:12:15 -08:00
Jean Delvare
f3069ae9d7 dmi: don't save the same device twice
Now that we gather on-board devices from both DMI types 10 and 41, there is
a possibility that we list the same device twice.  In order to not confuse
drivers, and also to save memory, make sure that we do not add duplicate
devices to the dmi_devices list.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23 17:12:14 -08:00
Wim Van Sebroeck
b4bd7d5945 SMBIOS/DMI: add type 41 = Onboard Devices Extended Information
From version 2.6 of the SMBIOS standard, type 10 (On Board Devices
Information) becomes obsolete.  The reason for this is that no further
fields can be added to this structure without adversely affecting existing
software's ability to properly parse the data.

Therefore type 41 (Onboard Devices Extended Information) was added.
The structure is as follows:

struct smbios_type_41 {
	u8 type;
	u8 length;
	u16 handle;
	u8 reference_designation_string;
	u8 device_type;		/* same device type as in type 10 */
	u8 device_type_instance;
	u16 segment_group_number;
	u8 bus_number;
	u8 device_function_number;
};

For more info: http://www.dmtf.org/standards/smbios

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:37 -08:00
Jean Delvare
7fce084a0b dmi: Let drivers walk the DMI table
Let drivers walk the DMI table for their own needs. Some drivers need
data stored in OEM-specific DMI records for proper operation.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:40 -05:00
Len Brown
5531d28504 Merge branches 'release' and 'dmi' into release 2008-02-07 03:11:31 -05:00
Matt Domsch
8f47f0b688 dcdbas: add DMI-based module autloading
DMI autoload dcdbas on all Dell systems.

This looks for BIOS Vendor or System Vendor == Dell, so this should
work for systems both Dell-branded and those Dell builds but brands
for others.  It causes udev to load the dcdbas module at startup,
which is used by tools called by HAL for wireless control and
backlight control, among other uses.

Thanks to Kay Sievers for figuring out how to do this with a single alias.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:01 -08:00
Ralf Baechle
911f21501f Remove inclusions of <linux/autoconf.h>
Nothing should ever include this file.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: "Mike Frysinger" <vapier.adi@gmail.com>
Acked-by: "Bryan Wu" <cooloney.lkml@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:00 -08:00
Len Brown
e6298c6d60 DMI: remove duplicate helper routine
Use existing dmi_get_system_info(),
Delete duplicate dmi_get_slot()

Spotted-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-03 17:37:02 -05:00
Joe Perches
d48140e3cd drivers/firmware/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 17:13:40 +02:00
Yinghai Lu
3212bff370 x86: left over fix for leak of early_ioremp in dmi_scan
Signed-off-by: Yinghai Lu <yinghai@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:32 +01:00
Ingo Molnar
0d64484f7e x86: fix DMI ioremap leak
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:09 +01:00
Parag Warudkar
79da472111 x86: fix DMI out of memory problems
People with HP Desktops (including me) encounter couple of DMI errors
during boot - dmi_save_oem_strings_devices: out of memory and
dmi_string: out of memory.

On some HP desktops the DMI data include OEM strings (type 11) out of
which only few are meaningful and most other are empty. DMI code
religiously creates copies of these 27 strings (65 bytes each in my
case) and goes OOM in dmi_string().

If DMI_MAX_DATA is bumped up a little then it goes and fails in
dmi_save_oem_strings while allocating dmi_devices of sizeof(struct
dmi_device) corresponding to these strings.

On x86_64 since we cannot use alloc_bootmem this early, the code uses a
static array of 2048 bytes (DMI_MAX_DATA) for allocating the memory DMI
needs. It does not survive the creation of empty strings and devices.

Fix this by detecting and not newly allocating empty strings and instead
using a one statically defined dmi_empty_string.

Also do not create a new struct dmi_device for each empty string - use
one statically define dmi_device with .name=dmi_empty_string and add
that to the dmi_devices list.

On x64 this should stop the OOM with same current size of DMI_MAX_DATA
and on x86 this should save a good amount of (27*65 bytes +
27*sizeof(struct dmi_device) bootmem.

Compile and boot tested on both 32-bit and 64-bit x86.

Signed-off-by: Parag Warudkar <parag.warudkar@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:59 +01:00
Greg Kroah-Hartman
c10997f657 Kobject: convert drivers/* from kobject_unregister() to kobject_put()
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00