Commit Graph

100 Commits

Author SHA1 Message Date
Larry Finger
ce9626eae2 ssb: Make bus registration failure not be silent
In kernel Bugzilla #15825, a case where routine ssb_bus_pcibus_register()
fails silently is reported. The cause for the failure is still being
investigated; however, the diagnosis would be easier if the failure
had been reported.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 14:21:23 -04:00
Rafał Miłecki
0a182fd88f ssb: Use relative offsets for SPROM
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 13:51:08 -04:00
Rafał Miłecki
ea2db495f9 ssb: Look for SPROM at different offset on higher rev CC
Our offset handling becomes even a little more hackish now. For some reason I
do not understand all offsets as inrelative. It assumes base offset is 0x1000
but it will work for now as we make offsets relative anyway by removing base
0x1000. Should be cleaner however.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26 13:51:08 -04:00
John W. Linville
d53cdbb94a ssb: do not read SPROM if it does not exist
Attempting to read registers that don't exist on the SSB bus can cause
hangs on some boxes.  At least some b43 devices are 'in the wild' that
don't have SPROMs at all.  When the SSB bus support loads, it attempts
to read these (non-existant) SPROMs and causes hard hangs on the box --
no console output, etc.

This patch adds some intelligence to determine whether or not the SPROM
is present before attempting to read it.  This avoids those hard hangs
on those devices with no SPROM attached to their SSB bus.  The
SSB-attached devices (e.g. b43, et al.) won't work, but at least the box
will survive to test further patches. :-)

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Michael Buesch <mb@bu3sch.de>
2010-04-26 13:50:54 -04:00
Larry Finger
85373ee817 ssb: Export ssb_chipco_gpio_control - needed by N PHY code
The latest changes in the N PHY core require the symbol
ssb_chipco_gpio_control to be exported.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:53:51 -05:00
Larry Finger
ac5b4e168e ssb: Add PCI ID 0x4322 to PHU handling
Some of the N PHYs need a revision in the handling of the PMU.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19 15:52:51 -05:00
Hauke Mehrtens
0052b8bb5a ssb: fix typo in ifdef comment
Cc:	Michael Buesch <mb@bu3sch.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-15 16:12:53 -05:00
Jochen Friedrich
83e34f03ee ssb: fix interrupt assignment
Explicitely enable shared interrupt 2 for any core that didn't get a dedicated IRQ
anymore (fallthrough case) and for EXTIF cores to make gpio interrupts work.
Also remove a bogus comment.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08 16:50:54 -05:00
Michael Buesch
391ae22ae5 ssb: Fix CONFIG_SSB_SDIOHOST typo
This fixes a CONFIG_SSB_SDIOHOST typo.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Reported-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Tested-By: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-03 16:55:20 -05:00
David S. Miller
28b4d5cc17 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/net/pcmcia/fmvj18x_cs.c
	drivers/net/pcmcia/nmclan_cs.c
	drivers/net/pcmcia/xirc2ps_cs.c
	drivers/net/wireless/ray_cs.c
2009-12-05 15:22:26 -08:00
Linus Torvalds
d9b2c4d0b0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (50 commits)
  pcmcia: rework the irq_req_t typedef
  pcmcia: remove deprecated handle_to_dev() macro
  pcmcia: pcmcia_request_window() doesn't need a pointer to a pointer
  pcmcia: remove unused "window_t" typedef
  pcmcia: move some window-related code to pcmcia_ioctl.c
  pcmcia: Change window_handle_t logic to unsigned long
  pcmcia: Pass struct pcmcia_socket to pcmcia_get_mem_page()
  pcmcia: Pass struct pcmcia_device to pcmcia_map_mem_page()
  pcmcia: Pass struct pcmcia_device to pcmcia_release_window()
  drivers/pcmcia: remove unnecessary kzalloc
  pcmcia: correct handling for Zoomed Video registers in topic.h
  pcmcia: fix printk formats
  pcmcia: autoload module pcmcia
  pcmcia/staging: update comedi drivers
  PCMCIA: stop duplicating pci_irq in soc_pcmcia_socket
  PCMCIA: ss: allow PCI IRQs > 255
  PCMCIA: soc_common: remove 'dev' member from soc_pcmcia_socket
  PCMCIA: soc_common: constify soc_pcmcia_socket ops member
  PCMCIA: sa1111: remove duplicated initializers
  PCMCIA: sa1111: wrap soc_pcmcia_socket to contain sa1111 specific data
  ...
2009-12-05 09:42:59 -08:00
Michael Buesch
e33761e6f2 ssb: Fix range check in sprom write
The range check in the sprom image parser hex2sprom() is broken.
One sprom word is 4 hex characters.
This fixes the check and also adds much better sanity checks to the code.
We better make sure the image is OK by doing some sanity checks to avoid
bricking the device by accident.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23 17:05:41 -05:00
Michael Buesch
3ba6018aa3 ssb: Fix SPROM writing
The SPROM writing routines were broken since we rewrote the suspend
handling on wireless devices, because SPROM writing depended on suspend.

This patch changes it and freezes devices with the driver remove(), probe()
callbacks instead. This also simplifies the whole logics a lot.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23 17:05:41 -05:00
Larry Finger
ac2752c145 ssb: Unconditionally log results of core scans
At present, the results of an SSB core scan are only logged when
CONFIG_SSB_DEBUG is "y". As this may not be set in a distro kernel,
it is difficult interpret many problems posted in bug reports or in
help forums.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23 17:05:28 -05:00
David S. Miller
2071a0084a Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-1000.c
	drivers/net/wireless/iwlwifi/iwl-6000.c
	drivers/net/wireless/iwlwifi/iwl-core.h
2009-11-11 11:38:16 -08:00
Martin Fuzzey
d8e2352278 ssb-pcmcia: Fix 32bit register access in early bus scanning
The scan function was using 32 bit access which does not
work on 16bit CF cards.

This patch corrects this by doing two 16 bit reads like
ssb_pcmcia_read32 already does.

mb -- Removed locking. That early in init there's no need for locking.

Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-10 16:21:12 -05:00
Dominik Brodowski
37ace3d413 pcmcia: convert ssb pcmcia driver to use new CIS helpers
SSB is a prime example of how to make use of the new CIS helpers.

CC: Michael Buesch <mb@bu3sch.de>
Acked-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-08 18:23:09 +01:00
Michael Buesch
8b45499ccb ssb: Put host pointers into a union
This slightly shrinks the structure.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27 16:47:55 -04:00
Randy Dunlap
de32cce132 ssb/sdio: fix printk format warnings
Fix printk format warnings:

drivers/ssb/sdio.c:336: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t'
drivers/ssb/sdio.c:443: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-16 16:21:00 -04:00
Larry Finger
cd559b36e7 ssb: Fix error when V1 SPROM extraction is forced
When an SPROM revision is not recognized, the code falls back to a V1
SPROM; however, that revision is not forced in the appropriate structure.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14 14:36:05 -04:00
Michael Buesch
54a68d14e0 ssb: Disable verbose SDIO coreswitch
Disable SDIO coreswitch debugging.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14 14:36:04 -04:00
Albert Herranz
24ea602e18 ssb: Implement SDIO host bus support
Add support for communicating with a Sonics Silicon Backplane through a
SDIO interface, as found in the Nintendo Wii WLAN daughter card.

The Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with
a SDIO host interface.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09 11:19:00 -04:00
Michael Buesch
e6c463e3a3 ssb: Fail ssb modinit, if attach of the buses failed.
SSB modinit should not succeed, if busattach failed.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08 16:31:08 -04:00
Gábor Stefanik
06e4da268c ssb: Implement PMU LDO control and use it in b43
Implement the "PMU LDO set voltage" and "PMU LDO PA ref enable"
functions, and use them during LP-PHY baseband init in b43.

Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28 14:40:53 -04:00
Gábor Stefanik
f0ea6ce14a ssb: Fix typo in the rev8 SPROM extraction routine
No comment. :-)

Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20 11:35:53 -04:00
Gábor Stefanik
f679056b2f ssb: Implement the remaining rev.8 SPROM vars needed for LP-PHY
Also add a "SPEX32" macro for extracting 32-bit SPROM variables.

Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:14:02 -04:00
Linus Torvalds
e864561c12 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits)
  cxgb3: Fix crash caused by stashing wrong netdev_queue
  ixgbe: Fix coexistence of FCoE and Flow Director in 82599
  memory barrier: adding smp_mb__after_lock
  net: adding memory barrier to the poll and receive callbacks
  netpoll: Fix carrier detection for drivers that are using phylib
  includecheck fix: include/linux, rfkill.h
  p54: tx refused but queue active
  Atheros Kconfig needs to be dependent on WLAN_80211
  mac80211: fix docbook
  mac80211_hwsim: avoid NULL access
  ssb: Add support for 4318E
  b43: Add support for 4318E
  zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b device
  zd1211rw: 07b8:6001 is a ZD1211B
  r6040: bump driver version to 0.24 and date to 08 July 2009
  r6040: restore MIER register correctly when IRQ line is shared
  ipv4: Fix fib_trie rebalancing, part 4 (root thresholds)
  davinci_emac: fix kernel oops when changing MAC address while interface is down
  igb: set lan id prior to configuring phy
  mac80211: minstrel: avoid accessing negative indices in rix_to_ndx()
  ...
2009-07-09 20:33:18 -07:00
Clyde McPherson
2fbddeb5c4 ssb: Add support for 4318E
Added support for the Broadcom 4318E chipset on PCMCIA/CF cards. The
4318E can do 802.11A/B/G, only B and G mode are supported in b43.

Signed-off-by: Clyde McPherson <ccmcphe@verizon.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 15:24:25 -04:00
Joe Perches
ad361c9884 Remove multiple KERN_ prefixes from printk formats
Commit 5fd29d6ccb ("printk: clean up
handling of log-levels and newlines") changed printk semantics.  printk
lines with multiple KERN_<level> prefixes are no longer emitted as
before the patch.

<level> is now included in the output on each additional use.

Remove all uses of multiple KERN_<level>s in formats.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08 10:30:03 -07:00
matthieu castet
ea4bbfd004 MIPS: BC47xx: Fix SSB irq setup
The current ssb irq setup in ssb_mipscore_init has the problem that it
configures some device on some irq without checking that the irq is not
taken by an other device.

For example in my case PCI host is on irq 0 and IPSEC on irq 3.
The current code:
  - store in dev->irq that IPSEC irq is 3 + 2
  - do a set_irq 0->3 on PCI host

But now IPSEC irq is not routed anymore to the mips code and dev->irq is
wrong.  This causes a problem described in [1].

This patch tries to solve the problem by making set_irq configure the
device we want to take the irq on the shared irq0. The previous example
becomes:
  - store in dev->irq that IPSEC irq is 3 + 2
  - do a set_irq 0->3 on PCI host:
  - irq 3 is already taken by IPSEC. do a set_irq 3->0 on IPSEC

I also added some code to print the irq configuration after irq setup to
allow easier debugging. And I add extra checking in ssb_mips_irq to report
device without irq or device with not routed irq.

[1] http://www.danm.de/files/src/bcm5365p/REPORTED_DEVICES

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Acked-by : Michael Buesch <mb@bu3sch.de>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03 15:45:27 +01:00
Matthieu Castet
e36b80b658 SSB: BCM47xx: Export ssb_watchdog_timer_set
this patch export ssb_watchdog_timer_set to allow to use it in a Linux 
watchdog driver.

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Acked-by : Michael Buesch <mb@bu3sch.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-08 16:57:50 +01:00
Michael Buesch
dd970e43d8 b43: Add BCM4307 PCI-ID
00:09.0 Network controller [0280]: Broadcom Corporation BCM4307 Ethernet Controller [14e4:4306] (rev 03)
    Subsystem: Broadcom Corporation BCM4307 Ethernet Controller [14e4:4306]
    Flags: bus master, fast devsel, latency 32, IRQ 10
    Memory at d7000000 (32-bit, non-prefetchable) [size=8K]
    Kernel driver in use: b43-pci-bridge
    Kernel modules: ssb

Reported-by: yoann <yoann71@msn.com>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:20 -04:00
Michael Buesch
feeb444549 ssb: remove EXPERIMENTAL dependencies.
ssb is not experimental anymore.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:04 -04:00
Michael Buesch
e79c1ba84c ssb: Add SPROM fallback support
This adds SSB functionality to register a fallback SPROM image from the
architecture setup code.

Weird architectures exist that have half-assed SSB devices without SPROM attached to
their PCI busses. The architecture can register a fallback SPROM image that is
used if no SPROM is found on the SSB device.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Florian Fainelli <florian@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05 14:39:32 -05:00
Michael Buesch
c970314615 ssb: Add PMU support
This adds support for the SSB PMU.
A PMU is found on Low-Power devices.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 15:03:49 -05:00
Michael Buesch
6b1c7c6760 b43/ssb: Add SPROM8 extraction and LP-PHY detection
This adds detection code for the LP-PHY and SPROM
extraction code for version 8, which is needed by the LP-PHY and
newer N-PHY.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 15:59:38 -05:00
Johannes Berg
92d6128e17 ssb/b43: add new N PHY device
This is used on my macbook. N PHY, obviously nothing works
yet, but we can detect the chip with this patch.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 15:59:37 -05:00
Kay Sievers
b7b05fe7f9 ssb: struct device - replace bus_id with dev_name(), dev_set_name()
This patch is part of a larger patch series which will remove
the "char bus_id[20]" name string from struct device. The device
name is managed in the kobject anyway, and without any size
limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev)
must be used. If your code uses static kobjects, which it shouldn't
do, "const char *init_name" can be used to statically provide the
name the registered device should have. At registration time, the
init_name field is cleared, to enforce the use of dev_name(dev) to
access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree
to be able to enable the new interface. Please apply this patch,
and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from
"struct device", to find the remaining pieces to convert, and finally
switch over to the new api, which will remove the 20 bytes array
and does no longer have a size limitation.

CC: Michael Buesch <mb@bu3sch.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21 11:06:03 -05:00
Mike Frysinger
9581483444 SSB: hide empty sub menu
If the target system cannot support SSB, then don't show the menu option as
it'll simply be an empty submenu.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-10 13:50:17 -08:00
Linus Torvalds
2be4ff2f08 Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits)
  pcmcia: ioctl-internal definitions
  pcmcia: cistpl header cleanup
  pcmcia: remove unused argument to pcmcia_parse_tuple()
  pcmcia: card services header cleanup
  pcmcia: device_id header cleanup
  pcmcia: encapsulate ioaddr_t
  pcmcia: cleanup device driver header file
  pcmcia: cleanup socket services header file
  pcmcia: merge ds_internal.h into cs_internal.h
  pcmcia: cleanup cs_internal.h
  pcmcia: cs_internal.h is internal
  pcmcia: use dev_printk for cs_error()
  pcmcia: remove CS_ error codes alltogether
  pcmcia: deprecate CS_BAD_TUPLE
  pcmcia: deprecate CS_BAD_ARGS
  pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE
  pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE
  pcmcia: deprecate CS_NO_MORE_ITEMS
  pcmcia: deprecate CS_IN_USE
  pcmcia: deprecate CS_CONFIGURATION_LOCKED
  ...

Fix trivial conflict in drivers/pcmcia/ds.c manually
2008-10-13 14:12:40 -07:00
David S. Miller
b262e60309 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/wireless/ath9k/core.c
	drivers/net/wireless/ath9k/main.c
	net/core/dev.c
2008-10-01 06:12:56 -07:00
Aurelien Jarno
ac82da3381 [SSB] Initialise dma_mask for SSB_BUSTYPE_SSB devices
For SSB_BUSTYPE_SSB type devices, we need to initialize dma_mask using
coherent_dma_mask so that calls to dma_set_mask() succeed.

It fixes the regression on the b44 driver introduced by commit
f225763a7d

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-27 15:45:37 +01:00
Larry Finger
31ce12fb3e ssb: Clean up extraction of MAC addresses from SPROM
Only rev 1 and 2 ssb SPROMs have fields named et0mac and et1mac;
however, all of the extraction routines extract pseudo data for these
fields from regions that are all 1's resulting in a hardware address
of FF:FF:FF:FF:FF:FF. This patch forces such a fill at the beginning of
the data extraction process, and only does the formal extraction if the
SPROM rev is 1 or 2.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29 16:24:07 -04:00
Larry Finger
095f695cbb ssb: Update for Rev. 5 SPROM
Although a revision 5 SPROM has not been seen in the wild, the
open-source portion of the MIPS driver 4.150.10.5 describes its
layout, which is mostly inherited from revision 4. This patch
implements the differences.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29 16:24:05 -04:00
Dominik Brodowski
635d19bea0 pcmcia: deprecate CS_NO_MORE_ITEMS
CS_NO_MORE_ITEMS is returned by the CIS tuple reading and parsing code if
the end of a tuple chain is reached. As at least one PCMCIA driver relies
on matching this return value, replace it with -ENOSPC which is now
uniquely used for this purpose within the in-kernel pcmcia subsystem.

CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23 02:29:54 +02:00
Dominik Brodowski
4c89e88bfd pcmcia: deprecate CS_SUCCESS
Instead of using own error or success codes, the PCMCIA code should rely on
the generic return values. Therefore, replace all occurrences of CS_SUCCESS
with 0.

CC: netdev@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23 02:29:26 +02:00
Holger Schurig
7f37441c21 ssb: allow compilation on systems without PCI
Makes ssb work on system without a PCI bus.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-18 11:05:13 -04:00
David S. Miller
7c3ceb4a40 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/wireless/iwlwifi/iwl-3945.c
	net/mac80211/mlme.c
2008-07-08 16:30:17 -07:00
Michael Buesch
9e095a687b ssb-pcicore: Fix IRQ-vector init on embedded devices
On embedded devices we must not route the interrupts through
the PCI core, if our host-bus is not PCI.

Reported-by: Steve Brown <sbrown@cortland.com>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-07 15:31:40 -04:00
Michael Buesch
f225763a7d ssb, b43, b43legacy, b44: Rewrite SSB DMA API
This is a rewrite of the DMA API for SSB devices.
This is needed, because the old (non-existing) "API" made too many bad
assumptions on the API of the host-bus (PCI).
This introduces an almost complete SSB-DMA-API that maps to the lowlevel
bus-API based on the bustype.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27 09:09:15 -04:00