Andras Korn reported an oops on log replay causes by a corrupted
xfs_inode_log_format_t passing a 0 size to kmem_zalloc. This patch handles
to small or too large numbers of log regions gracefully by rejecting the
log replay with a useful error message.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Andras Korn <korn-sgi.com@chardonnay.math.bme.hu>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Fix this sparse warnings:
fs/xfs/linux-2.6/xfs_ioctl.c:72:1: warning: symbol 'xfs_find_handle' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_ioctl.c:249:1: warning: symbol 'xfs_open_by_handle' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_ioctl.c:361:1: warning: symbol 'xfs_readlink_by_handle' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_ioctl.c:496:1: warning: symbol 'xfs_attrmulti_attr_get' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_ioctl.c:525:1: warning: symbol 'xfs_attrmulti_attr_set' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_ioctl.c:555:1: warning: symbol 'xfs_attrmulti_attr_remove' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_ioctl.c:657:1: warning: symbol 'xfs_ioc_space' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_ioctl.c:1340:1: warning: symbol 'xfs_file_ioctl' was not declared. Should it be static?
fs/xfs/support/debug.c:65:1: warning: symbol 'xfs_fs_vcmn_err' was not declared. Should it be static?
fs/xfs/support/debug.c:112:1: warning: symbol 'xfs_hex_dump' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Instead of the keyword 'static' the macro 'STATIC' is used, so the
symbols are still global with CONFIG_XFS_DEBUG.
Fix this sparse warnings:
fs/xfs/linux-2.6/xfs_super.c:638:1: warning: symbol 'xfs_blkdev_get' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_super.c:655:1: warning: symbol 'xfs_blkdev_put' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_super.c:876:1: warning: symbol 'xfsaild' was not declared. Should it be static?
fs/xfs/xfs_bmap.c:6208:1: warning: symbol 'xfs_check_block' was not declared. Should it be static?
fs/xfs/xfs_dir2_leaf.c:553:1: warning: symbol 'xfs_dir2_leaf_check' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Fix this sparse warning:
fs/xfs/xfs_da_btree.c:1550:26: warning: symbol 'xfs_default_nameops' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Currently we unconditionally issue a flush from xfs_free_buftarg, but
since 2.6.29-rc1 this gives a warning in the style of
end_request: I/O error, dev vdb, sector 0
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
The inode can't be locked by anyone else as we just created it a few
lines above and it's not been added to any lookup data structure yet.
So use a trylock that must succeed to get around the lockdep warnings.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Andras Korn reported an oops on log replay causes by a corrupted
xfs_inode_log_format_t passing a 0 size to kmem_zalloc. This patch handles
to small or too large numbers of log regions gracefully by rejecting the
log replay with a useful error message.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Andras Korn <korn-sgi.com@chardonnay.math.bme.hu>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
This reverts commit d2859751cd.
This commit caused regression. We'll try to fix use of new
vmap API for next release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
This reverts commit 95f8e302c0.
This commit caused regression. We'll try to fix use of new
vmap API for next release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
This reverts commit d2859751cd.
This commit caused regression. We'll try to fix use of new
vmap API for next release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
This reverts commit 95f8e302c0.
This commit caused regression. We'll try to fix use of new
vmap API for next release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Swapfiles are magic - I/O is directly initialized by the VM without
involving the filesystem. Swapping out extents underneath the VM thus
can cause severe problems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
We can't just call xfs_log_unmount_dealloc on any failure because the
ail thread which is torn down by xfs_log_unmount_dealloc might not
be initialized yet.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Reported-by: Lachlan McIlroy <lachlan@sgi.com>
Currently we call from the nicely abstracted linux quotaops into a ugly
multiplexer just to split the calls out at the same boundary again.
Rewrite the quota ops handling to remove that obfucation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Get rid of various obsfucating wrappers for accessing the quota hash lock,
we only keep the accessors for accessing the mplist and freelist locks as
they encode a multi-level datastructure walk. But make sure all of them
are defined in the same way as simple macros.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Now that we have a helper to test if a mutex is held use it instead of our
own little hacks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Remove these macros which only obsfucated the code in rather nast ways.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
xfs_create and xfs_mkdir only have minor differences, so merge both of them
into a sigle function. While we're at it also make the error handling code
more straight-forward.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Dave Chinner <david@fromorbit.com>
Just another set of types obsfucating the code, remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
xfs_ialloc_btree.h has a a cuple of macros that only obsfucate the code
but don't provide any abstraction benefits. This patches removes those
and cleans up the reamaining defintions up a little.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Our default has been to always use 8 32KB log buffers for a while now, so
remove the special casing for larger block size filesystem to use the same
or even lower number of buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
The XFS_QMOPT_DQLOCK flag introduces major complexity in the quota subsystem
but isn't actually used anywhere. So remove it and all the hazzles it
introduces.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Remove the superflous igrab by keeping a reference on the path/file all the
time and clean up various bits of surrounding code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Use multiple lables for proper error unwinding and get rid of some now
superflous variables.
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Splitting the task for a VFS-induced inode flush into two functions doesn't
make any sense, so merge the two functions dealing with it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Dave Chinner <david@fromorbit.com>
We currently duplicate code to reset the attribute fork after the last
attribute has been deleted. Factor this out into a small helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
These aren't only unused but also reference a lock that doesn't exist anymore.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
The source and target inodes are guaranteed to never be the same by the VFS,
so no need to check for that (and we would get into bad trouble later anyway
if that were the case). Also clean up the error handling to use two gotos
instead of nested conditions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
When mount fails after allocating the real-time inodes we currently leak
them. Add a new helper to free the real-time inodes which can be used by
both the mount and unmount path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Clean up the error handling in xfs_mountfs. Use readable goto label names,
simplify the uuid handling and other error conditions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Till VFS can correctly support read-only remount without racing,
use WARN_ON instead of BUG_ON on detecting transaction in flight
after quiescing filesystem.
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Before trying to obtain, read or write a buffer,
check that the buffer length is actually valid. If
it is not valid, then something read in the recovery
process has been corrupted and we should abort
recovery.
Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Tested-by: Eric Sesterhenn <snakebyte@gmx.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Before trying to obtain, read or write a buffer,
check that the buffer length is actually valid. If
it is not valid, then something read in the recovery
process has been corrupted and we should abort
recovery.
Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Tested-by: Eric Sesterhenn <snakebyte@gmx.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
fixes kernel.org bugzilla 12538, xfs_fsr fails on 2.6.29-rc kernels
Regression caused by 743bb4650d
This was an embarrasing mistake, reallocating the sxp pointer passed
in from the main ioctl switch.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net
Reported-by: Paul Martin <pm@debian.org>
Tested-by: Paul Martin <pm@debian.org>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
fixes kernel.org bugzilla 12538, xfs_fsr fails on 2.6.29-rc kernels
Regression caused by 743bb4650d
This was an embarrasing mistake, reallocating the sxp pointer passed
in from the main ioctl switch.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net
Reported-by: Paul Martin <pm@debian.org>
Tested-by: Paul Martin <pm@debian.org>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Till VFS can correctly support read-only remount without racing,
use WARN_ON instead of BUG_ON on detecting transaction in flight
after quiescing filesystem.
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[XFS] Long btree pointers are still 64 bit on disk
On 32 bit machines with CONFIG_LBD=n, XFS reduces the
in memory size of xfs_fsblock_t to 32 bits so that it
will fit within 32 bit addressing. However, the disk format
for long btree pointers are still 64 bits in size.
The recent btree rewrite failed to take this into account
when initialising new btree blocks, setting sibling pointers
to NULL and checking if they are NULL. Hence checking whether
a 64 bit NULL was the same as a 32 bit NULL was failingi
resulting in NULL sibling pointers failing to be detected
correctly. This showed up as WANT_CORRUPTED_GOTO shutdowns
in xfs_btree_delrec.
Fix this by making all the comparisons and setting of long
pointer btree NULL blocks to the disk format, not the
in memory format. i.e. use NULLDFSBNO.
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Reported-by: Jacek Luczak <difrost.kernel@gmail.com>
Reported-by: Danny ter Haar <dth@dth.net>
Tested-by: Jacek Luczak <difrost.kernel@gmail.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
There are several tests for #ifndef HAVE_FORMAT32, but
this is never defined anywhere so it is always the default
behavior; just remove the ifndef goop.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
[XFS] Long btree pointers are still 64 bit on disk
On 32 bit machines with CONFIG_LBD=n, XFS reduces the
in memory size of xfs_fsblock_t to 32 bits so that it
will fit within 32 bit addressing. However, the disk format
for long btree pointers are still 64 bits in size.
The recent btree rewrite failed to take this into account
when initialising new btree blocks, setting sibling pointers
to NULL and checking if they are NULL. Hence checking whether
a 64 bit NULL was the same as a 32 bit NULL was failingi
resulting in NULL sibling pointers failing to be detected
correctly. This showed up as WANT_CORRUPTED_GOTO shutdowns
in xfs_btree_delrec.
Fix this by making all the comparisons and setting of long
pointer btree NULL blocks to the disk format, not the
in memory format. i.e. use NULLDFSBNO.
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Reported-by: Jacek Luczak <difrost.kernel@gmail.com>
Reported-by: Danny ter Haar <dth@dth.net>
Tested-by: Jacek Luczak <difrost.kernel@gmail.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Remove the last of the macros-defined-to-static-functions.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Recently we have quite a few kerneloops reports about dereferencing a NULL
if_data in the attribute fork. From looking over the code this can only
happen if we pass a 0 size argument to xfs_iformat_local. This implies some
sort of corruption and in fact the only mailinglist report about this from
earlier this year was after a powerfail presumably on a system with write
cache and without barriers.
Add a quick sanity check for the attr fork size in xfs_iformat to catch
these early and without an oops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Currently the bad_features2 fixup and the alignment updates in the superblock
are skipped if we mount a filesystem read-only. But for the root filesystem
the typical case is to mount read-only first and only later remount writeable
so we'll never perform this update at all. It's not a big problem but means
the logs of people needing the fixup get spammed at every boot because they
never happen on disk.
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
We can have both a user and a group/project dquot locked at the same time,
as long as the user dquot is locked first. Tell lockdep about that fact
by making the group/project dquots a different lock class.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
xfs_dqlock2 locks two xfs_dquots, which is fine as it always locks the
dquot with the lower id first. Use mutex_lock_nested to tell lockdep
about this fact.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
We can have both a a quota hash chain and the per-mount list locked at
the same time. But given that both use the same struct dqhash as list
head we have to tell lockdep that they are different lock classes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
The compat version of the attrmulti ioctl needs to ask for and then
later release write access to the mount just like the native version,
otherwise we could potentially write to read-only mounts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Open by handle just grabs an inode by handle and then creates itself
a dentry for it. While this works for regular files it is horribly
broken for directories, where the VFS locking relies on the fact that
there is only just one single dentry for a given inode, and that
these are always connected to the root of the filesystem so that
it's locking algorithms work (see Documentations/filesystems/Locking)
Remove all the existing open by handle code and replace it with a small
wrapper around the exportfs code which deals with all these issues.
At the same time we also make the checks for a valid handle strict
enough to reject all not perfectly well formed handles - given that
we never hand out others that's okay and simplifies the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Recently we have quite a few kerneloops reports about dereferencing a NULL
if_data in the attribute fork. From looking over the code this can only
happen if we pass a 0 size argument to xfs_iformat_local. This implies some
sort of corruption and in fact the only mailinglist report about this from
earlier this year was after a powerfail presumably on a system with write
cache and without barriers.
Add a quick sanity check for the attr fork size in xfs_iformat to catch
these early and without an oops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Currently the bad_features2 fixup and the alignment updates in the superblock
are skipped if we mount a filesystem read-only. But for the root filesystem
the typical case is to mount read-only first and only later remount writeable
so we'll never perform this update at all. It's not a big problem but means
the logs of people needing the fixup get spammed at every boot because they
never happen on disk.
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
We can have both a user and a group/project dquot locked at the same time,
as long as the user dquot is locked first. Tell lockdep about that fact
by making the group/project dquots a different lock class.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
xfs_dqlock2 locks two xfs_dquots, which is fine as it always locks the
dquot with the lower id first. Use mutex_lock_nested to tell lockdep
about this fact.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
We can have both a a quota hash chain and the per-mount list locked at
the same time. But given that both use the same struct dqhash as list
head we have to tell lockdep that they are different lock classes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
The compat version of the attrmulti ioctl needs to ask for and then
later release write access to the mount just like the native version,
otherwise we could potentially write to read-only mounts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Open by handle just grabs an inode by handle and then creates itself
a dentry for it. While this works for regular files it is horribly
broken for directories, where the VFS locking relies on the fact that
there is only just one single dentry for a given inode, and that
these are always connected to the root of the filesystem so that
it's locking algorithms work (see Documentations/filesystems/Locking)
Remove all the existing open by handle code and replace it with a small
wrapper around the exportfs code which deals with all these issues.
At the same time we also make the checks for a valid handle strict
enough to reject all not perfectly well formed handles - given that
we never hand out others that's okay and simplifies the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Remove the last of the macros-defined-to-static-functions.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
It removes XFS specific ioctl interfaces and request codes
for freeze feature.
This patch has been supplied by David Chinner.
Signed-off-by: Dave Chinner <dgc@sgi.com>
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, ext3 in mainline Linux doesn't have the freeze feature which
suspends write requests. So, we cannot take a backup which keeps the
filesystem's consistency with the storage device's features (snapshot and
replication) while it is mounted.
In many case, a commercial filesystem (e.g. VxFS) has the freeze feature
and it would be used to get the consistent backup.
If Linux's standard filesystem ext3 has the freeze feature, we can do it
without a commercial filesystem.
So I have implemented the ioctls of the freeze feature.
I think we can take the consistent backup with the following steps.
1. Freeze the filesystem with the freeze ioctl.
2. Separate the replication volume or create the snapshot
with the storage device's feature.
3. Unfreeze the filesystem with the unfreeze ioctl.
4. Take the backup from the separated replication volume
or the snapshot.
This patch:
VFS:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that they can return an error.
Rename write_super_lockfs and unlockfs of the super block operation
freeze_fs and unfreeze_fs to avoid a confusion.
ext3, ext4, xfs, gfs2, jfs:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that write_super_lockfs returns an error if needed,
and unlockfs always returns 0.
reiserfs:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that they always return 0 (success) to keep a current behavior.
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement XFS's large buffer support with the new vmap APIs. See the vmap
rewrite (db64fe02) for some numbers. The biggest improvement that comes from
using the new APIs is avoiding the global KVA allocation lock on every call.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
XFS's vmap batching simply defers a number (up to 64) of vunmaps, and keeps
track of them in a list. To purge the batch, it just goes through the list and
calls vunamp on each one. This is pretty poor: a global TLB flush is generally
still performed on each vunmap, with the most expensive parts of the operation
being the broadcast IPIs and locking involved in the SMP callouts, and the
locking involved in the vmap management -- none of these are avoided by just
batching up the calls. I'm actually surprised it ever made much difference.
(Now that the lazy vmap allocator is upstream, this description is not quite
right, but the vunmap batching still doesn't seem to do much)
Rip all this logic out of XFS completely. I will improve vmap performance
and scalability directly in subsequent patch.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Currently xfs_ino_t is defined as a u64 which can either be an unsigned
long long or on some 64 bit platforms and unsigned long. Just making
it and unsigned long long mean's it's still always 64 bits wide, but we
don't need to resort to cases to print it.
Fixes a warning regression on 64 bit powerpc in current git.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
John Stanley reported EOVERFLOW errors in readdir from his self-build
glibc. I traced this down to glibc enabling d_off overflow checks
in one of the about five million different getdents implementations.
In 2.6.28 Dave Woodhouse moved our readdir double buffering required
for NFS4 readdirplus into nfsd and at that point we lost the capping
of the directory offsets to 32 bit signed values. Johns glibc used
getdents64 to even implement readdir for normal 32 bit offset dirents,
and failed with EOVERFLOW only if this happens on the first dirent in
a getdents call. I managed to come up with a testcase that uses
raw getdents and does the EOVERFLOW check manually. We always hit
it with our last entry due to the special end of directory marker.
The patch below is a dumb version of just putting back the masking,
to make sure we have the same behavior as in 2.6.27 and earlier.
I will work on a better and cleaner fix for 2.6.30.
Reported-by: John Stanley <jpsinthemix@verizon.net>
Tested-by: John Stanley <jpsinthemix@verizon.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Change the left/right variables to the proper always 64bit xfs_dfsbo_t
type because otherwise compilation fails for Geert on m68k without
CONFIG_LBD:
| fs/xfs/xfs_btree.c: In function 'xfs_btree_readahead_lblock':
| fs/xfs/xfs_btree.c:736: warning: comparison is always true due to limited range of data type
| fs/xfs/xfs_btree.c:741: warning: comparison is always true due to limited range of data type
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
NFS clients or users of the handle ioctls can pass us arbitrary inode
numbers through the exportfs interface. Make sure we use the
XFS_IGET_BULKSTAT so that these don't cause shutdowns due to the corruption
checks. Also translate the EINVAL we get back for invalid inode clusters
into an ESTALE which is more appropinquate, and remove the useless check
for a NULL inode on a successfull xfs_iget return.
I have a testcase to reproduce this using the handle interface which
I will submit to xfsqa.
Reported-by: Mario Becroft <mb@gem.win.co.nz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Implement XFS's large buffer support with the new vmap APIs. See the vmap
rewrite (db64fe02) for some numbers. The biggest improvement that comes from
using the new APIs is avoiding the global KVA allocation lock on every call.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
XFS's vmap batching simply defers a number (up to 64) of vunmaps, and keeps
track of them in a list. To purge the batch, it just goes through the list and
calls vunamp on each one. This is pretty poor: a global TLB flush is generally
still performed on each vunmap, with the most expensive parts of the operation
being the broadcast IPIs and locking involved in the SMP callouts, and the
locking involved in the vmap management -- none of these are avoided by just
batching up the calls. I'm actually surprised it ever made much difference.
(Now that the lazy vmap allocator is upstream, this description is not quite
right, but the vunmap batching still doesn't seem to do much)
Rip all this logic out of XFS completely. I will improve vmap performance
and scalability directly in subsequent patch.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The iolock is dropped and re-acquired around the call to XFS_SEND_NAMESP().
While the iolock is released the file can become cached. We then
'goto retry' and - if we are doing direct I/O - mapping->nrpages may now be
non zero but need_i_mutex will be zero and we will hit the WARN_ON().
Since we have dropped the I/O lock then the file size may have also changed
so what we need to do here is 'goto start' like we do for the XFS_SEND_DATA()
DMAPI event.
We also need to update the filesize before releasing the iolock so that
needs to be done before the XFS_SEND_NAMESP event. If we drop the iolock
before setting the filesize we could race with a truncate.
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In libxfs xfs_bmbt_disk_get_all needs to handle unaligned data and thus
has been updated to use get_unaligned_be64. In kernelspace we don't strictly
need it as the routine is only used for tracing and xfsidbg, but let's keep
the two implementations in sync.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_fs_vcmn_err can be called under a spinlock, but does a sleeping memory
allocation to create buffer for it's internal sprintf. Fortunately it's
the only caller of icmn_err, so we can merge the two and have one single
static buffer and spinlock protecting it. While we're at it make sure
we proper __attribute__ format annotations so that the compiler can detect
mismatched format strings.
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Speculative allocation beyond eof doesn't work properly. It was
broken some time ago after a code cleanup that moved what is now
xfs_iomap_eof_align_last_fsb() and xfs_iomap_eof_want_preallocate()
out of xfs_iomap_write_delay() into separate functions. The code
used to use the current file size in various checks but got changed
to be max(file_size, i_new_size). Since i_new_size is the result
of 'offset + count' then in xfs_iomap_eof_want_preallocate() the
check for '(offset + count) <= isize' will always be true.
ie if 'offset + count' is > ip->i_size then isize will be i_new_size
and equal to 'offset + count'.
This change fixes all the places that used to use the current file
size.
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We should be using the incore inode size here not the linux inode
size. The incore inode size is always up to date for directories
whereas the linux inode size is not updated for directories.
We've hit assertions in xfs_bmap() and traced it back to the linux
inode size being zero but the incore size being correct.
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Preserve any error returned by the bio layer.
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Instead of implementing our own checks use inode_change_ok to check for
necessary permission in setattr. There is a slight change in behaviour
as inode_change_ok doesn't allow i_mode updates to add the suid or sgid
without superuser privilegues while the old XFS code just stripped away
those bits from the file mode.
(First sent on Semptember 29th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
XFS has a mode called invisble I/O that doesn't update any of the
timestamps. It's used for HSM-style applications and exposed through
the nasty open by handle ioctl.
Instead of doing directly assignment of file operations that set an
internal flag for it add a new FMODE_NOCMTIME flag that we can check
in the normal file operations.
(addition of the generic VFS flag has been ACKed by Al as an interims
solution)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
- xfs_sb.h add the XFS_SB_VERSION2_PARENTBIT features2 that has been
around in userspace for some time
- xfs_inode.h: move a few things out of __KERNEL__ that are needed by
userspace
- xfs_mount.h: only include xfs_sync.h under __KERNEL__
- xfs_inode.c: minor whitespace fixup. I accidentaly changes this when
importing this file for use by userspace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Check for the project ID after attaching all inodes to the transaction.
That way the unlock in the error case is done by the transaction subsystem,
which guaratees that is uses the right flags (which was wrong from day one
of this check), and avoids having special code unlocking an array of inodes
with potential duplicates. Attaching the inode first is the method used
by xfs_rename and the other namespace methods all other error that require
multiple locked inodes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Replace the b_fspriv pointer and it's ugly accessors with a properly types
xfs_mount pointer. Also switch log reocvery over to it instead of using
b_fspriv for the mount pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
None of this code appears to be used anywhere so remove it.
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When project quota is active and is being used for directory tree
quota control, we disallow rename outside the current directory
tree. This requires a check to be made after all the inodes
involved in the rename are locked. We fail to unlock the inodes
correctly if we disallow the rename when the target is outside the
current directory tree. This results in a hang on the next access
to the inodes involved in failed rename.
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Hit this assert because an inode was tagged with XFS_ICI_RECLAIM_TAG but
not XFS_IRECLAIMABLE|XFS_IRECLAIM. This is because xfs_iget_cache_hit()
first clears XFS_IRECLAIMABLE and then calls __xfs_inode_clear_reclaim_tag()
while only holding the pag_ici_lock in read mode so we can race with
xfs_reclaim_inodes_ag(). Looks like xfs_reclaim_inodes_ag() will do the
right thing anyway so just remove the assert.
Thanks to Christoph for pointing out where the problem was.
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
entries_size is probably left over from when we used to pass the
size to kmem_free().
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
We check the return value of all other calls to xfs_buf_get_noaddr().
Make sense to do it here too.
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
When project quota is active and is being used for directory tree
quota control, we disallow rename outside the current directory
tree. This requires a check to be made after all the inodes
involved in the rename are locked. We fail to unlock the inodes
correctly if we disallow the rename when the target is outside the
current directory tree. This results in a hang on the next access
to the inodes involved in failed rename.
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Move the inode tracing into xfs_iget.c / xfs_inode.h and kill xfs_vnode.c
now that it's empty.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
The whole machinery to wait on I/O completion is related to the I/O path
and should be there instead of in xfs_vnode.c. Also give the functions
more descriptive names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
There's just one caller of this helper, and it's much cleaner to just merge
the xfs_do_force_shutdown call into it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
There's almost nothing left in this function, instead remove the IRELE
on the real times inodes and the call to XFS_QM_UNMOUNT into xfs_unmountfs.
For the regular unmount case that means it now also happenes after dmapi
notification, but otherwise there is no difference in behaviour.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Currently we explicitly call xfs_iflush on the quota, real-time and root
inodes from xfs_unmount_flush. But we just called xfs_sync_inodes with
SYNC_ATTR and do an XFS_bflush aka xfs_flush_buftarg to make sure all inodes
are on disk already, so there is no need for these special cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Use xfs_trans_ijoin in xfs_trans_iget in case we need to join an inode into
a transaction instead of opencoding it. Based on a discussion with and an
incomplete patch from Niv Sardi.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
We never supported shared read-only filesystems, so remove the dead
code left over from IRIX for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
There are a few inode flags around that aren't used anywhere, so remove
them. Also update xfsidbg to display all used inode flags correctly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
The various inlines in xfs_sb.h that deal with the superblock version
and fature flags were converted from macros a while ago, and this
show by the odd coding style full of useless braces and backslashes
and the avoidance of conditionals.
Clean these up to look like normal C code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
All but one caller of xlog_state_want_sync drop and re-acquire
l_icloglock around the call to it, just so that xlog_state_want_sync can
acquire and drop it.
Move all lock operation out of l_icloglock and assert that the lock is
held when it is called.
Note that it would make sense to extende this scheme to
xlog_state_release_iclog, but the locking in there is more complicated
and we'd like to keep the atomic_dec_and_lock optmization for those
callers not having l_icloglock yet.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
->link is guranteed to get an already reference inode passed so we
can do a simple increment of i_count instead of using igrab and thus
avoid banging on the global inode_lock. This is what most filesystems
already do.
Also move the increment after the call to xfs_link to simplify error
handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
xfs_buf_iostart is a "shared" helper for xfs_buf_read_flags,
xfs_bawrite, and xfs_bdwrite - except that there isn't much shared
code but rather special cases for each caller.
So remove this function and move the functionality to the caller.
xfs_bawrite and xfs_bdwrite are now big enough to be moved out of
line and the xfs_buf_read_flags is moved into a new helper called
_xfs_buf_read.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Merge xfs_iextract and xfs_idestroy into xfs_ireclaim as they are never
called individually. Also rewrite most comments in this area as they
were severly out of date.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
When mnt_want_write was introduced a call to it was added around
xfs_ichgtime, but there is no need for this because a file can't be open
read/write on a r/o mount, and a mount can't degrade r/o while we still
have files open for writing. As the mnt_want_write changes were never
merged into the CVS tree this patch is for mainline only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
The recent compat patches make xfs_file.c include xfs_ioctl32.h unconditional,
which breaks the build on 32 bit systems which don't have the various compat
defintions.
Remove the include and move the defintion of xfs_file_compat_ioctl to
xfs_ioctl.h so that we can avoid including all the compat defintions in
xfs_file.c
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Put things in IMHO a more readable order, now
that it's all done; add some comments.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Add a compat handler for XFS_IOC_FSSETDM_BY_HANDLE.
I haven't tested this, lacking dmapi tools to do so
(unless xfsqa magically gets this somehow?)
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Add a compat handler for XFS_IOC_ATTRMULTI_BY_HANDLE
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Add a compat handler for XFS_IOC_ATTRLIST_BY_HANDLE
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The XFS_IOC_FSBULKSTAT_SINGLE ioctl passes in the
desired inode number, while XFS_IOC_FSBULKSTAT passes
in the previous/last-stat'd inode number. The
compat handler wasn't differentiating these, so
when a XFS_IOC_FSBULKSTAT_SINGLE request for inode
128 was sent in, stat information for 131 was sent out.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The 32-bit xfs_blkstat_one handler was failing because
a size check checked whether the remaining (32-bit)
user buffer was less than the (64-bit) bulkstat buffer,
and failed with ENOMEM if so. Move this check
into the respective handlers so that they check the
correct sizes.
Also, the formatters were returning negative errors
or positive bytes copied; this was odd in the positive
error value world of xfs, and handled wrong by at least
some of the callers, which treated the bytes returned
as an error value. Move the bytes-used assignment
into the formatters.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Currently the compat formatter was handled by passing
in "private_data" for the xfs_bulkstat_one formatter,
which was really just another formatter... IMHO this
got confusing.
Instead, just make a new xfs_bulkstat_one_compat
formatter for xfs_bulkstat, and call it via a wrapper.
Also, don't translate the ioctl nrs into their native
counterparts, that just clouds the issue; we're in a
compat handler anyway, just switch on the 32-bit cmds.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The args for XFS_IOC_FSGROWFSDATA and XFS_IOC_FSGROWFSRTA
have padding on the end on intel, so add arg copyin functions,
and then just call the growfs ioctl helpers.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The big hitter here was the bstat field, which contains
different sized time_t on 32 vs. 64 bit. Add a copyin
function to translate the 32-bit arg to 64-bit, and
call the swapext ioctl helper.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Create a new xfs_ioctl.h file which has prototypes for
ioctl helpers that may be called in compat mode.
Change several compat ioctl cases which are IOW to simply copy
in the userspace argument, then call the common ioctl helper.
This also fixes xfs_compat_ioc_fsgeometry_v1(), which had
it backwards before; it copied in an (empty) arg, then copied
out the native result, which probably corrupted userspace. It
should be translating on the copyout.
Also, a bit of formatting cleanup for consistency, and conversion
of all error returns to use XFS_ERROR().
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
This makes the c file less cluttered and a bit more
readable. Consistently name the ioctl number
macros with "_32" and the compatibility stuctures
with "_compat." Rename the helpers which simply
copy in the arg with "_copyin" for easy identification.
Finally, for a few of the existing helpers, modify them
so that they directly call the native ioctl helper
after userspace argument fixup.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Moving the copy_from_user out of some of the ioctl helpers will
make it easier for the compat ioctl switch to copy in the right
struct, then just pass to the underlying helper.
Also, move common access checks into the helpers themselves,
and out of the native ioctl switch code, to reduce code
duplication between native & compat ioctl callers.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
If we fail after xfs_iget we have to drop the reference count, spotted
by Dave Chinner. Also remove some useless asserts and stop trying to
deal with di_mode == 0 inodes because never gets those without passing
the IGET_CREATE flag to xfs_iget.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Allocate the inode in xfs_iget_cache_miss and pass it into xfs_iread. This
simplifies the error handling and allows xfs_iread to be shared with userspace
which already uses these semantics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Just pass down the XFS_IGET_* flags all the way down to xfs_imap instead
of translating them mid-way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Most uses of struct xfs_imap are to map and inode to a buffer. To avoid
copying around the inode location information we should just embedd a
strcut xfs_imap into the xfs_inode. To make sure it doesn't bloat an
inode the im_len is changed to a ushort, which is fine as that's what
the users exepect anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
xfs_imap is the only caller of xfs_dilocate and doesn't add any significant
value. Merge the two functions and document the various cases we have for
inode cluster lookup in the new xfs_imap.
Also remove the unused im_agblkno and im_ioffset fields from struct xfs_imap
while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
We have removed the support for old-style inode items a while ago and
xlog_recover_do_inode_trans is now only called for XFS_LI_INODE items.
That means we can remove the call to xfs_imap there and with it the
XFS_IMAP_LOOKUP that is set by all other callers. We can also mark
xfs_imap static now.
(First sent on October 21st)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
The only caller of xfs_itobp that doesn't have i_blkno setup is now
the initial inode read. It needs access to the whole xfs_imap so using
xfs_inotobp is not an option. Instead opencode the buffer lookup in
xfs_iread and kill all the functionality for the initial map from
xfs_itobp.
(First sent on October 21st)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Split out the body of the main loop into a separate helper to make the
code readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
These names don't add any value at all over just using the numerical
values.
(First sent on October 9th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Now that we have a separate xfs_icdinode_t for the in-core inode which
gets logged there is no need anymore for the xfs_dinode vs xfs_dinode_core
split - the fact that part of the structure gets logged through the inode
log item and a small part not can better be described in a comment.
All sizeof operations on the dinode_core either really wanted the
icdinode and are switched to that one, or had already added the size
of the agi unlinked list pointer. Later both will be replaced with
helpers once we get the larger CRC-enabled dinode.
Removing the data and attribute fork unions also has the advantage that
xfs_dinode.h doesn't need to pull in every header under the sun.
While we're at it also add some more comments describing the dinode
structure.
(First sent on October 7th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
xfs_ialloc_log_di is only used to log the full inode core + di_next_unlinked.
That means all the offset magic is not nessecary and we can simply use
xfs_trans_log_buf directly. Also add a comment describing what we should do
here instead.
(First sent on October 7th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Move all fields from xlog_iclog_fields_t into xlog_in_core_t instead of having
them in a substructure and the using #defines to make it look like they were
directly in xlog_in_core_t. Also document that xlog_in_core_2_t is grossly
misnamed, and make all references to it typesafe.
(First sent on Semptember 15th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Add a helper to read the AGF header and perform basic verification.
Based on hunks from a larger patch from Dave Chinner.
(First sent on Juli 23rd)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Add a helper to read the AGI header and perform basic verification.
Based on hunks from a larger patch from Dave Chinner.
(First sent on Juli 23rd)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
i_gen is incremented in directory operations when the
directory is changed. It is never read or otherwise used
so it should be removed to help reduce the size of the
struct xfs_inode.
The patch also removes a duplicate logging of the directory
inode core. We only need to do this once per transaction
so kill the one associated with the i_gen increment.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
The only thing left is xfs_do_force_shutdown which already has a defintion
in xfs_mount.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
The only thing left are the forced shutdown flags and freeze macros which
fit into xfs_mount.h much better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
This adds the fiemap inode_operation, which for us converts the
fiemap values & flags into a getbmapx structure which can be sent
to xfs_getbmap. The formatter then copies the bmv array back into
the user's fiemap buffer via the fiemap helpers.
If we wanted to be more clever, we could also return mapping data
for in-inode attributes, but I'm not terribly motivated to do that
just yet.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
This adds a new output flag, BMV_OF_LAST to indicate if we've hit
the last extent in the inode. This potentially saves an extra call
from userspace to see when the whole mapping is done.
It also adds BMV_IF_DELALLOC and BMV_OF_DELALLOC to request, and
indicate, delayed-allocation extents. In this case bmv_block
is set to -2 (-1 was already taken for HOLESTARTBLOCK; unfortunately
these are the reverse of the in-kernel constants.)
These new flags facilitate addition of the new fiemap interface.
Rather than adding sh_delalloc, remove sh_unwritten & just test
the flags directly.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Preliminary work to hook up fiemap, this allows us to pass in an
arbitrary formatter to copy extent data back to userspace.
The formatter takes info for 1 extent, a pointer to the user "thing*"
and a pointer to a "filled" variable to indicate whether a userspace
buffer did get filled in (for fiemap, hole "extents" are skipped).
I'm just using the getbmapx struct as a "common denominator" because
as far as I can see, it holds all info that any formatters will care
about.
("*thing" because fiemap doesn't pass the user pointer around, but rather
has a pointer to a fiemap info structure, and helpers associated with it)
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
gcc is warning about an uninitialised variable in xfs_growfs_rt().
This is a false positive. Fix it by changing the scope of the
transaction pointer to wholly within the internal loop inside
the function.
While there, preemptively change xfs_growfs_rt_alloc() in the
same way as it has exactly the same structure as xfs_growfs_rt()
but gcc is not warning about it. Yet.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
