Commit Graph

193 Commits

Author SHA1 Message Date
Balaji Rao
9e6f8ed7c3 mfd: Remove non exported references from pcf50633
Remove references to set_irq_type and handle_level_irq which are not exported
to modules

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-15 11:50:58 +01:00
Linus Torvalds
b9a0d06a35 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  TWL4030: fix clk API usage
  [ARM] 5364/1: allow flush_ioremap_region() to be used from modules
  [ARM] w90x900: fix build errors and warnings
  [ARM] i.MX add missing include
  [ARM] i.MX: fix breakage from commit 278892736e
  [ARM] i.MX: remove LCDC controller register definitions from imx-regs.h
2009-01-13 14:52:35 -08:00
Russell King
e6b50c8d58 TWL4030: fix clk API usage
Always pass a struct device if one is available; and there's really
no reason for the processor specific stuff in this file if only
people would follow the API usage properly by using the struct device.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-13 19:39:11 +00:00
Samuel Ortiz
b29c06ae96 mfd: Fix twl4030-core build
Fixes:
drivers/mfd/twl4030-core.c:657: error: implicit declaration of function
'cpu_is_omap2430'

Not the nicest fix, but this should be improved by a better OMAP clock API
implementation.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-11 01:34:25 +01:00
Ben Dooks
98325f8f8e mfd: Ensure sm501 GPIO pin mode is GPIO when configured
When setting an GPIO to either input or output, we
should ensure that the pin configuration elsewhere
in the chip is set to GPIO in-case the initial
setup has not been done correctly.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-11 01:34:25 +01:00
David Brownell
d1fdb4f6fb mfd: dm355 evm MMC/SD card detection
Support card detect and writeprotect switches on DM355 EVM.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-11 01:34:25 +01:00
Balaji Rao
6a3d119b4c mfd: PCF50633 gpio support
What the PCF05633 calls as a 'GPIO' is much more than the GPIO in the linux
sense and there are only 4 of them - which means, the gpiolib is not used
here.

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-11 01:34:24 +01:00
Balaji Rao
08c3e06a5e mfd: PCF50633 adc driver
This patch adds basic support for the PCF50633 ADC. The subtractive mode
is not supported yet.

Since we don't have adc subsystem, it currently lives in drivers/mfd.

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Acked-by: Jonathan Cameron <jonathan.cameron@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-11 01:34:23 +01:00
Balaji Rao
f52046b14b mfd: PCF50633 core driver
This patch implements the core of the PCF50633 driver. This core driver has
generic register read/write functions and does interrupt management for its
sub devices.

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-11 01:34:23 +01:00
Mark Brown
0081e8020e leds: Add WM8350 LED driver
The voltage and current regulators on the WM8350 AudioPlus PMIC can be
used in concert to provide a power efficient LED driver.  This driver
implements support for this within the standard LED class.

Platform initialisation code should configure the LED hardware in the
init callback provided by the WM8350 core driver.  The callback should
use wm8350_isink_set_flash(), wm8350_dcdc25_set_mode() and
wm8350_dcdc_set_slot() to configure the operating parameters of the
regulators for their hardware and then then use wm8350_register_led() to
instantiate the LED driver.

This driver was originally written by Liam Girdwood, though it has been
extensively modified since then.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 12:38:58 +00:00
Mark Brown
3f874b6643 mfd: Fix section mismatch in da903x
The subdevice removal functions are marked __devexit but are referenced
from the error handling path when probing so are needed even when
__devexit functions are removed.

Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 15:31:49 +01:00
David Brownell
88e75cc347 mfd: move drivers/i2c/chips/menelaus.c to drivers/mfd
ove the menelaus driver from drivers/i2c/chips to drivers/mfd
since it's more of a multi-function device than anything else,
and since Jean is trying to vanish drivers/i2c/chips ASAP.

One way to think of these chips are as the PMIC family most
used with OMAP2 generation chips.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:44 +01:00
David Brownell
87c13493e6 mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd
Move the tps65010 driver from drivers/i2c/chips to drivers/mfd
since it's more of a multi-function device than anything else,
and since Jean is trying to vanish drivers/i2c/chips ASAP.

One way to think of these chips are as the PMIC family most
used with OMAP1 generation chips.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:43 +01:00
David Brownell
0931a4c6db mfd: dm355evm msp430 driver
Basic MFD framework for the MSP430 microcontroller firmware used
on the dm355evm board:

 - Provides an interface for other drivers: register read/write
   utilities, and register declarations.

 - Directly exports:
     * Many signals through the GPIO framework
         + LEDs
         + SW6 through gpio sysfs
	 + NTSC/nPAL jumper through gpio sysfs
	 + ... more could be added later, e.g. MMC signals
     * Child devices:
	+ LEDs, via leds-gpio child (and default triggers)
	+ RTC, via rtc-dm355evm child device
	+ Buttons and IR control, via dm355evm_keys

 - Supports power-off system call.  Use the reset button to power
   the board back up; the power supply LED will be on, but the
   MSP430 waits to re-activate the regulators.

 - On probe() this:
     * Announces firmware revision
     * Turns off the banked LEDs
     * Exports the resources noted above
     * Hooks the power-off support
     * Muxes tvp5146 -or- imager for video input

Unless the new tvp514x driver (tracked for mainline) is configured,
this assumes that some custom imager driver handles video-in.

This completely ignores the registers reporting the output voltages
on the various power supplies.  Someone could add a hwmon interface
if that seems useful.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:43 +01:00
Mark Brown
4331bb3233 mfd: Add missing break from wm3850-core
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:43 +01:00
Mark Brown
ca23f8c1b0 mfd: Add WM8351 support
The WM8351 is a WM8350 variant. As well as register default changes the
WM8351 has fewer voltage and current regulators than the WM8350.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:42 +01:00
Mark Brown
645524a9c6 mfd: Support configurable numbers of DCDCs and ISINKs on WM8350
Some WM8350 variants have fewer DCDCs and ISINKs. Identify these at
probe and refuse to use the absent DCDCs when running on these chips.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:42 +01:00
Mark Brown
53a0d99b1e mfd: Handle missing WM8350 platform data
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:42 +01:00
Mark Brown
9692063062 mfd: Add WM8352 support
The WM8352 is a variant of the WM8350. Aside from the register defaults
there are no software visible differences to the WM8350.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:42 +01:00
Samuel Ortiz
94964f96a6 mfd: Use irq_to_desc in twl4030 code
The global irq_desc array is soon going to be accessible only with
!CONFIG_SPARSE_IRQ. We should start using the generic irq_to_desc()
routines instead.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:42 +01:00
Mike Rapoport
856f6fd119 mfd: Dialog DA9030 battery charger MFD driver
This patch amends DA903x MFD driver with definitions and methods
needed for battery charger driver.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:41 +01:00
Mark Brown
b8380c1a66 mfd: Register WM8400 codec device
Register a child device for the codec in the WM8400.

Also switch the unregistration of the MFD devices to use the MFD core
since the current code is hand rolling the same thing.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:41 +01:00
Mark Brown
44faac3155 mfd: Pass driver_data onto child devices
The MFD cell structure provides a driver_data field but doesn't pass it
on to the child devices when instantiating them - do that.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:41 +01:00
Samuel Ortiz
6354ab5c63 mfd: Fix twl4030-core.c build error
This is a fix for:

twl4030-core.c:(.text+0x16a797): undefined reference to `clk_get_rate'
twl4030-core.c:(.text+0x16a797): undefined reference to `clk_put'

on x86 and x86_64, as the clock API is not defined on those platforms.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:40 +01:00
David Brownell
b73eac7871 mfd: twl4030 regulator bug fixes
This contains two bugfixes to the initial twl4030 regulator
support patch related to USB:

 (a) always overwrite the old list of consumers ... else
     the regulator handles all use the same "usb1v5" name;
 (b) don't set up the "usbcp" regulator, which turns out
     to be managed through separate controls, usually ULPI
     directly from the OTG controller.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:40 +01:00
David Brownell
dad759ff8b mfd: twl4030: create some regulator devices
Initial code to create twl4030 voltage regulator devices, using
the new regulator framework.  Note that this now starts to care
what name is used to declare the TWL chip:

 - TWL4030 is the "old" chip; newer ones have a bigger variety
   of VAUX2 voltages.

 - TWL5030 is the core "new" chip; TPS65950 is its catalog version.

 - The TPS65930 and TPS65920 are cost-reduced catalog versions of
   TWL5030 parts ... fewer regulators, no battery charger, etc.

Board-specific regulator configuration should be provided, listing
which regulators are used and their constraints (e.g. 1.8V only).

Code that could ("should"?) leverage the regulator stuff includes
TWL4030 USB transceiver support and MMC glue, LCD support for the
3430SDP and Labrador boards, and S-Video output.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:39 +01:00
David Brownell
67460a7c26 mfd: twl4030: cleanup symbols and OMAP dependency
Finish removing dependency of TWL driver stack on platform-specific
IRQ definitions ... and remove the build dependency on OMAP.

This lets the TWL4030 code be included in test builds for most
platforms, and will make it easier for non-OMAP folk to update
most of this code for new APIs etc.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:39 +01:00
David Brownell
5725d66b9d mfd: twl4030: simplified child creation code
Minor cleanup to twl4030-core: define a helper function to populate
a single child node, and use it to replace six inconsistent versions
of the same logic.  Both object and source code shrink.

As part of this, some devices now have more IRQ resources:  battery
charger, keypad, ADC, and USB transceiver.  That helps to remove some
irq #defines that block the children's drivers code from compiling on
non-OMAP platforms.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:39 +01:00
Mark Brown
4008e879e1 power_supply: Add battery health reporting for WM8350
Implement support for reporting battery health in the WM8350 battery
interface. Since we are now able to report this via the classs remove
the diagnostics from the interrupt handler.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:39 +01:00
Mark Brown
b797a55519 mfd: Refactor WM8350 chip identification
Since the WM8350 driver was originally written the semantics for the
identification registers of the chip have been clarified, allowing
us to do an exact match on all the fields. This avoids mistakenly
running on unsupported hardware.

Also change to using the datasheet names more consistently for
legibility and fix a printk() that should be dev_err().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:39 +01:00
Mark Brown
d756f4a444 mfd: Switch WM8350 revision detection to a feature based model
Rather than check for chip revisions in the WM8350 drivers have the core
code set flags for relevant differences.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:38 +01:00
David Brownell
3fba19ec1a mfd: allow reading entire register banks on twl4030
Minor change to the TWL4030 utility interface:  support reads
of all 256 bytes in each register bank (vs just 255).  This
can help when debugging, but is otherwise a NOP.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:38 +01:00
Mark Brown
6748852634 mfd: Add AUXADC support for WM8350
The auxiliary ADC in the WM8350 is shared between several subdevices
so access to it needs to be arbitrated by the core driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:38 +01:00
Mark Brown
0c8a601678 mfd: Add WM8350 revision H support
No other software changes are required.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:38 +01:00
Mark Brown
858e674466 mfd: Add some documentation for WM8350 register lock
Hopefully this will make the purpose of these functions a bit clearer,
it's not immediately obvious that the lock is a hardware feature.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:37 +01:00
Mark Brown
2c5212279a mfd: Remove i.MX31ism from WM8350 i2c driver
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:37 +01:00
Mark Brown
6cd99b7828 mfd: Don't mark WM8350 security register as volatile
There's no need to read this back from the chip each time.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:37 +01:00
Russell King
dcea83adc6 [ARM] Hide ISA DMA API when ISA_DMA_API is unset
When ISA_DMA_API is unset, we're not implementing the ISA DMA API,
so there's no point in publishing the prototypes via asm/dma.h, nor
including the machine dependent parts of that API.

This allows us to remove a lot of mach/dma.h files which don't contain
any useful code.  Unfortunately though, some platforms put their own
private non-ISA definitions into mach/dma.h, so we leave these behind
and fix the appropriate #include statments.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29 18:42:40 +00:00
Russell King
59f0cb0fdd [ARM] remove memzero()
As suggested by Andrew Morton, remove memzero() - it's not supported
on other architectures so use of it is a potential build breaking bug.
Since the compiler optimizes memset(x,0,n) to __memzero() perfectly
well, we don't miss out on the underlying benefits of memzero().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27 12:37:59 +00:00
Mark Brown
898d8054ec mfd: Correct WM8350 I2C return code usage
The vendor BSP used for the WM8350 development provided an I2C driver
which incorrectly returned zero on succesful sends rather than the
number of transmitted bytes, an error which was then propagated into the
WM8350 I2C accessors.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-16 19:58:47 +01:00
Mike Rapoport
b1ccbdc4a2 mfd: fix event masking for da9030
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-16 19:58:45 +01:00
Al Viro
9ca68233f2 missing dependencies on HAVE_CLK in drivers/mfd
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01 12:40:38 -07:00
Mark Brown
9c366452e0 mfd: Make WM8400 depend on I2C until SPI is submitted
Otherwise we could build in WM8400 but not I2C.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-24 18:34:39 +02:00
Samuel Ortiz
8e2eaabfd9 mfd: add missing Kconfig entry for da903x
This one was accidentally left out during the rc1 mfd merge.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-24 18:34:27 +02:00
Roel Kluin
7cf5244ce4 mfd: check for platform_get_irq() return value in sm501
sm501_devdata->irq is unsigned, while platform_get_irq() returns a
signed int.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-22 01:39:55 +02:00
Arjan van de Ven
7ab18995e1 mfd: use pci_ioremap_bar() in sm501
Use the newly introduced pci_ioremap_bar() function in drivers/mfd.
pci_ioremap_bar() just takes a pci device and a bar number, with the goal
of making it really hard to get wrong, while also having a central place
to stick sanity checks.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-22 01:21:24 +02:00
Mark Brown
e76f7558d8 mfd: Don't store volatile bits in WM8350 register cache
This makes the contents of the cache clearer and fixes incorrect
initialisation of the cache for partially volatile registers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-22 01:19:40 +02:00
Stephen Rothwell
799f9e3267 mfd: don't export wm3850 static functions
October 10th linux-next build (powerpc allyesconfig) failed like this:

drivers/mfd/wm8350-core.c:1131: error: __ksymtab_wm8350_create_cache causes a section type conflict

Caused by commit 89b4012bef ("mfd: Core
support for the WM8350 AudioPlus PMIC"). wm8350_create_cache is not used
elsewhere, so remove the EXPORT_SYMBOL.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-22 01:19:39 +02:00
David Brownell
a30d46c042 mfd: twl4030 IRQ handling update
- Move it into a separate file; clean and streamline it
 - Restructure the init code for reuse during secondary dispatch
 - Support both levels (primary, secondary) of IRQ dispatch
 - Use a workqueue for irq mask/unmask and trigger configuration

Code for two subchips currently share that secondary handler code.
One is the power subchip; its IRQs are now handled by this core,
courtesy of this patch.  The other is the GPIO module, which will
be supported through a later patch.

There are also minor changes to the header file, mostly related
to GPIO support; nothing yet in mainline cares about those.  A
few references to OMAP-specific symbols are disabled; when they
can all be removed, the TWL4030 support ceases being OMAP-specific.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-22 01:19:37 +02:00
Linus Torvalds
9301975ec2 Merge branch 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu
and x86/uv.

The sparseirq branch is just preliminary groundwork: no sparse IRQs are
actually implemented by this tree anymore - just the new APIs are added
while keeping the old way intact as well (the new APIs map 1:1 to
irq_desc[]).  The 'real' sparse IRQ support will then be a relatively
small patch ontop of this - with a v2.6.29 merge target.

* 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits)
  genirq: improve include files
  intr_remapping: fix typo
  io_apic: make irq_mis_count available on 64-bit too
  genirq: fix name space collisions of nr_irqs in arch/*
  genirq: fix name space collision of nr_irqs in autoprobe.c
  genirq: use iterators for irq_desc loops
  proc: fixup irq iterator
  genirq: add reverse iterator for irq_desc
  x86: move ack_bad_irq() to irq.c
  x86: unify show_interrupts() and proc helpers
  x86: cleanup show_interrupts
  genirq: cleanup the sparseirq modifications
  genirq: remove artifacts from sparseirq removal
  genirq: revert dynarray
  genirq: remove irq_to_desc_alloc
  genirq: remove sparse irq code
  genirq: use inline function for irq_to_desc
  genirq: consolidate nr_irqs and for_each_irq_desc()
  x86: remove sparse irq from Kconfig
  genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n
  ...
2008-10-20 13:23:01 -07:00